If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.
| id |
Chinese (Simplified) |
English |
| 0x40050003 | 某个固件配置信息不完整，所以使用了默认值。 |
Some firmware configuration information was incomplete, so defaults were used. |
| 0x40050004 | 用户配置数据正在覆盖固件配置数据。 |
User configuration data is overriding firmware configuration data. |
| 0x4005000B | 存储输入的键盘数据的信号缓冲区已经溢出(可以通过注册表配置缓冲区大小)。 |
The ring buffer that stores incoming keyboard data has overflowed (buffer size is configurable via the registry). |
| 0x80050005 | 无法创建 %1 的设备映射项。 |
Unable to create the device map entry for %1. |
| 0x80050006 | 无法删除 %1 的设备映射项。 |
Unable to delete the device map entry for %1. |
| 0x8005000E | 驱动程序未能获得创建正确的 WaitWake IRP 所需的资源。 |
The driver could not obtain resources required to create a propper WaitWake IRP. |
| 0xC0050001 | 内存不足，无法分配设备 %1 所需的内部存储。 |
Not enough memory was available to allocate internal storage needed for the device %1. |
| 0xC0050002 | 内存不足，无法分配用于保留 %1 的输入数据的信号缓冲区。 |
Not enough memory was available to allocate the ring buffer that holds incoming data for %1. |
| 0xC0050007 | 找不到部分键盘端口设备的设备对象。 |
Could not locate the device object for one or more keyboard port devices. |
| 0xC0050008 | 无法连接到端口设备 %1。 |
Could not connect to port device %1. |
| 0xC0050009 | 无法启用已连接端口设备 %1 上的中断。 |
Could not enable interrupts on connected port device %1. |
| 0xC005000A | 无法禁用已连接端口设备 %1 上的中断。 |
Could not disable interrupts on connected port device %1. |
| 0xC005000C | 设备 %1 的驱动程序遇到了内部设备驱动程序错误。 |
The driver for device %1 encountered an internal driver error. |
| 0xC005000D | 驱动程序未能创建所需的设备对象。 |
The driver could not create the required device object. |
| 0xC005000F | 无法附加到 PnP 设备堆栈。 |
Could not attach to the PnP device stack. |