| 0xC3 | 在系统处于空闲状态时耗尽系统电源的 USB 设备。 %n %nUSB 设备: VID: %3 PID: %4 REV: %5 %n执行的操作: %2 |
USB device draining system power when system is idle. %n %nUSB Device: VID: %3 PID: %4 REV: %5 %nAction taken: %2 |
| 0xC4 | 在系统处于空闲状态时耗尽系统电源的 USB 设备。 %n %nUSB 设备: VID: %3 PID: %4 REV: %5 %n删除操作失败: %2 |
USB device draining system power when system is idle. %n %nUSB Device: VID: %3 PID: %4 REV: %5 %nRemoval action failed: %2 |
| 0x30000001 | 启动 |
Start |
| 0x30000002 | 停止 |
Stop |
| 0x3000000B | 错误 |
Error |
| 0x3000000C | 完成 |
Complete |
| 0x3000000D | 调度 |
Dispatch |
| 0x3000000E | 添加 |
Add |
| 0x3000000F | 删除 |
Remove |
| 0x30000010 | 信息 |
Information |
| 0x30000011 | 队列 |
Queue |
| 0x30000012 | 警告 |
Warning |
| 0x40010000 | 请求 USB 设备描述符失败。 |
A request for the USB device descriptor failed. |
| 0x40010001 | USB 设置地址请求失败。 |
The USB set address request failed. |
| 0x40010002 | USB 端口重置请求失败。 |
A USB port reset request failed. |
| 0x40010003 | 未删除 USB 设备的上一个实例。 |
A previous instance of the USB device was not removed. |
| 0x40010004 | USB 设备返回的 USB 配置描述符无效。 |
The USB device returned an invalid USB configuration descriptor. |
| 0x40010005 | USB 设备返回的 USB 设备描述符无效。 |
The USB device returned an invalid USB device descriptor. |
| 0x40010006 | 无法访问注册表。 |
Unable to access the registry. |
| 0x40010007 | 请求 USB 配置描述符失败。 |
A request for the USB configuration descriptor failed. |
| 0x40010008 | 请求 USB 设备的端口状态失败。 |
A request for the USB device's port status failed. |
| 0x40010009 | USB 设备返回的序列号字符串无效。 |
The USB device returned an invalid serial number string. |
| 0x4001000A | USB 设置 SEL 请求失败。 |
The USB set SEL request failed. |
| 0x4001000B | 请求 USB BOS 描述符失败。 |
A request for the USB BOS descriptor failed. |
| 0x4001000C | 请求 USB 设备限定符描述符失败。 |
A request for the USB device qualifier descriptor failed. |
| 0x4001000D | 请求 USB 序列号字符串描述符失败。 |
A request for the USB serial number string descriptor failed. |
| 0x4001000E | 请求 USB 语言 ID 字符串描述符失败。 |
A request for the USB language ID string descriptor failed. |
| 0x4001000F | 请求 USB 产品描述字符串描述符失败。 |
A request for the USB product description string descriptor failed. |
| 0x40010010 | 请求 Microsoft 操作系统扩展配置描述符失败。 |
A request for the Microsoft OS extended configuration descriptor failed. |
| 0x40010011 | 请求 Microsoft 操作系统容器 ID 描述符失败。 |
A request for the Microsoft OS container ID descriptor failed. |
| 0x40010012 | USB 设备返回的 USB BOS 描述符无效。 |
The USB device returned an invalid USB BOS descriptor. |
| 0x40010013 | USB 设备返回的 USB 设备限定符描述符无效。 |
The USB device returned an invalid USB device qualifier descriptor. |
| 0x40010014 | USB 设备返回的 USB 语言 ID 字符串描述符无效。 |
The USB device returned an invalid USB language ID string descriptor. |
| 0x40010015 | USB 设备返回的 Microsoft 操作系统容器 ID 描述符无效。 |
The USB device returned an invalid Microsoft OS container ID descriptor. |
| 0x40010016 | USB 设备返回的 Microsoft 操作系统扩展配置描述符无效。 |
The USB device returned an invalid Microsoft OS extended configuration descriptor. |
| 0x40010017 | USB 设备返回的产品描述字符串描述符无效。 |
The USB device returned an invalid product description string descriptor. |
| 0x40010018 | USB 设备返回的序列号字符串描述符无效。 |
The USB device returned an invalid serial number string descriptor. |
| 0x40010019 | USB 设备的 SuperSpeed 链接始终进入错误状态 SSInactive。 |
The SuperSpeed link to the USB device keeps going to an error state SSInactive. |
| 0x4001001A | USB 设备的 SuperSpeed 链接始终进入错误状态 Compliance。如果此设备可以删除，请删除该设备，然后从设备管理器禁用/启用以进行恢复。 |
The SuperSpeed link to the USB device keeps going to an error state Compliance. If the device is removable, remove the device and then disable/enable from device manager to recover. |
| 0x4001001B | USB 设备与 Windows 不兼容。 |
The USB device is not compatible with Windows. |
| 0x4001001C | 请求 Microsoft 操作系统 2.0 描述符集失败。 |
A request for the Microsoft OS 2.0 descriptor set failed. |
| 0x4001001D | USB 设备返回的 Microsoft 操作系统 2.0 描述符集无效。 |
The USB device returned an invalid Microsoft OS 2.0 descriptor set. |
| 0x4001001E | MS 操作系统 2.0 设置备用枚举请求失败。 |
A MS OS 2.0 Set Alternate Enumeration request failed. |
| 0x4001001F | USB 设备返回的广告牌 AdditionalInfoUrl 字符串描述符无效。 |
The USB device returned an invalid Billboard AdditionalInfoUrl string descriptor. |
| 0x40010020 | USB 设备返回的备用模式字符串描述符无效。 |
The USB device returned an invalid Alternate mode string descriptor. |
| 0x40020000 | USB 集线器返回的端口状态无效。 |
The USB hub returned an invalid port status. |
| 0x40020001 | USB 集线器的控制传输请求失败。 |
The USB hub failed a control transfer request. |
| 0x40020002 | USB 集线器的中断传输请求失败。 |
The USB hub failed an interrupt transfer request. |
| 0x40020003 | USB 集线器无法重置。 |
The USB hub failed to reset. |
| 0x70000001 | USB 3.0 集线器驱动程序断开 |
USB 3.0 Hub Driver Rundown |
| 0x70000002 | 准备硬件 |
Prepare Hardware |
| 0x70000003 | 添加设备 |
Add Device |
| 0x70000004 | 发布硬件 |
Release Hardware |
| 0x70000005 | D0 输入 |
D0 Entry |
| 0x70000006 | D0 退出 |
D0 Exit |
| 0x70000007 | 意外删除 |
Surprise Removal |
| 0x70000008 | 清理 |
Cleanup |
| 0x70000009 | USB 设备枚举 |
USB Device Enumeration |
| 0x7000000A | 描述符验证 |
Descriptor Validation |
| 0x7000000B | 客户端请求 |
Client Request |
| 0x7000000C | USB 端口 |
USB Port |
| 0x7000000D | 状态机 |
State Machine |
| 0x7000000E | 集线器重置 |
Hub Reset |
| 0x7000000F | 控制传输 |
Control Transfer |
| 0x70000010 | 用户模式 IOCTL |
User-Mode IOCTL |
| 0x90000001 | System |
System |
| 0x90000002 | 这是接收来自 USBHUB3 驱动程序的内部分析事件的分析通道。 |
This is the Analytic channel to which internal Analytic events from the USBHUB3 driver are sent. |
| 0xB0000001 | 启动断开 |
Start Rundown |
| 0xB0000002 | 完成断开 |
Complete Rundown |
| 0xB0000003 | USB 3.0 集线器信息 |
USB 3.0 Hub Information |
| 0xB0000004 | USB 2.0/1.1 集线器信息 |
USB 2.0/1.1 Hub Information |
| 0xB0000005 | USB 根集线器信息 |
USB Root Hub Information |
| 0xB0000006 | USB 设备信息 |
USB Device Information |
| 0xB0000007 | USB 2.0/1.1 端口 |
USB 2.0/1.1 Port |
| 0xB0000008 | USB 3.0 端口 |
USB 3.0 Port |
| 0xB0000009 | 端口的 ACPI UPC 程序包(_U) |
ACPI _UPC Package for Port |
| 0xB000000A | 端口的 ACPI PLD 程序包(_P) |
ACPI _PLD Package for Port |
| 0xB0000014 | 为 USB 集线器启动 EvtDevicePrepareHardware |
Start of EvtDevicePrepareHardware for USB Hub |
| 0xB0000015 | 为 USB 集线器完成 EvtDevicePrepareHardware |
Complete EvtDevicePrepareHardware for USB Hub |
| 0xB000001D | 为 USB 集线器启动 EvtDeviceAdd |
Start of EvtDeviceAdd for USB Hub |
| 0xB000001E | 为 USB 集线器完成 EvtDeviceAdd |
Complete EvtDeviceAdd for USB Hub |
| 0xB000001F | 为 USB 集线器启动 EvtDeviceReleaseHardware |
Start of EvtDeviceReleaseHardware for USB Hub |
| 0xB0000020 | 为 USB 集线器完成 EvtDeviceReleaseHardware |
Complete EvtDeviceReleaseHardware for USB Hub |
| 0xB0000021 | 为 USB 集线器启动 EvtDeviceD0Entry |
Start of EvtDeviceD0Entry for USB Hub |
| 0xB0000022 | 为 USB 集线器完成 EvtDeviceD0Entry |
Complete EvtDeviceD0Entry for USB Hub |
| 0xB0000023 | 为 USB 集线器启动 EvtDeviceD0Exit |
Start of EvtDeviceD0Exit for USB Hub |
| 0xB0000024 | 为 USB 集线器完成 EvtDeviceD0Exit |
Complete EvtDeviceD0Exit for USB Hub |
| 0xB0000027 | 为 USB 集线器启动 EvtDeviceCleanup |
Start of EvtDeviceCleanup for USB Hub |
| 0xB0000028 | 为 USB 集线器完成 EvtDeviceCleanup |
Complete EvtDeviceCleanup for USB Hub |
| 0xB0000029 | 为 USB 设备启动 EvtDevicePrepareHardware |
Start of EvtDevicePrepareHardware for USB Device |
| 0xB000002A | 为 USB 设备完成 EvtDevicePrepareHardware |
Complete EvtDevicePrepareHardware for USB Device |
| 0xB000002B | 新 USB 设备信息 |
New USB Device Information |
| 0xB000002C | USB 集线器嵌套太深 |
USB Hub Nested Too Deeply |
| 0xB000002D | USB 集线器类型未知 |
Unknown USB Hub Type |
| 0xB000002F | 为 USB 设备启动 EvtDeviceAdd |
Start of EvtDeviceAdd for USB Device |
| 0xB0000030 | 为 USB 设备完成 EvtDeviceAdd |
Complete EvtDeviceAdd for USB Device |
| 0xB0000031 | 为 USB 设备启动 EvtDeviceReleaseHardware |
Start of EvtDeviceReleaseHardware for USB Device |
| 0xB0000032 | 为 USB 设备完成 EvtDeviceReleaseHardware |
Complete EvtDeviceReleaseHardware for USB Device |
| 0xB0000033 | 为 USB 设备启动 EvtDeviceD0Entry |
Start of EvtDeviceD0Entry for USB Device |
| 0xB0000034 | 为 USB 设备完成 EvtDeviceD0Entry |
Complete EvtDeviceD0Entry for USB Device |
| 0xB0000035 | 为 USB 设备启动 EvtDeviceD0Exit |
Start of EvtDeviceD0Exit for USB Device |
| 0xB0000036 | 为 USB 设备完成 EvtDeviceD0Exit |
Complete EvtDeviceD0Exit for USB Device |
| 0xB0000039 | 为 USB 设备启动 EvtDeviceCleanup |
Start of EvtDeviceCleanup for USB Device |
| 0xB000003A | 为 USB 设备完成 EvtDeviceCleanup |
Complete EvtDeviceCleanup for USB Device |
| 0xB000003C | 启动 USB 设备枚举 |
Start of USB Device Enumeration |
| 0xB000003D | 完成 USB 设备枚举 |
Completion of USB Device Enumeration |
| 0xB000003E | 重试枚举 |
Retry Enumeration |
| 0xB000003F | 已达到最大枚举重试计数 |
Maximum Enumeration Retry Count Reached |
| 0xB0000040 | USB 设备枚举失败 |
USB Device Enumeration Failed |
| 0xB0000041 | 端口重置超时 |
Port Reset Timed Out |
| 0xB0000042 | 恢复时已重置 USB 集线器 |
USB Hub Was Reset On Resume |
| 0xB0000046 | 验证 MS 操作系统扩展属性描述符标头失败 |
Validation Failure of MS OS Extended Property Descriptor Header |
| 0xB0000047 | 验证 MS 操作系统扩展属性描述符失败 |
Validation Failure of MS OS Extended Property Descriptor |
| 0xB0000048 | Validation Failure of BOS Descriptor Header |
Validation Failure of BOS Descriptor Header |
| 0xB0000049 | 验证 BOS 描述符失败 |
Validation Failure of BOS Descriptor |
| 0xB000004A | 验证配置描述符失败 |
Validation Failure of Configuration Descriptor |
| 0xB000004B | 验证设备描述符失败 |
Validation Failure of Device Descriptor |
| 0xB000004C | 验证设备限定符描述符失败 |
Validation Failure of Device Qualifier Descriptor |
| 0xB000004D | 验证语言 ID 字符串描述符失败 |
Validation Failure of Language ID String Descriptor |
| 0xB000004E | 验证 MS 操作系统容器 ID 描述符标头失败 |
Validation Failure of MS OS Container ID Descriptor Header |
| 0xB000004F | 验证 MS 操作系统容器 ID 描述符失败 |
Validation Failure of MS OS Container ID Descriptor |
| 0xB0000050 | 验证 MS 操作系统描述符失败 |
Validation Failure of MS OS Descriptor |
| 0xB0000051 | 验证 MS 操作系统扩展配置描述符标头失败 |
Validation Failure of MS OS Extended Configuration Descriptor Header |
| 0xB0000052 | 验证 MS 操作系统扩展配置描述符失败 |
Validation Failure of MS OS Extended Configuration Descriptor |
| 0xB0000053 | 验证产品 ID 字符串描述符失败 |
Validation Failure of Product ID String Descriptor |
| 0xB0000054 | 验证序列号字符串描述符失败 |
Validation Failure of Serial Number String Descriptor |
| 0xB0000055 | Validation Failure of MS OS 2.0 Descriptor Set |
Validation Failure of MS OS 2.0 Descriptor Set |
| 0xB000005A | 为 USB 设备启动 IRP_MJ_INTERNAL_DEVICE_CONTROL |
Start of IRP_MJ_INTERNAL_DEVICE_CONTROL for USB Device |
| 0xB000005B | 为 USB 设备完成 IRP_MJ_INTERNAL_DEVICE_CONTROL |
Completion of IRP_MJ_INTERNAL_DEVICE_CONTROL for USB Device |
| 0xB000005C | 为 USB 设备启动 URB 客户端请求 |
Start URB Client Request for USB Device |
| 0xB000005D | 为 USB 设备完成 URB 客户端请求 |
Completion of URB Client Request for USB Device |
| 0xB000005E | URB 标头长度无效 |
Invalid URB Header Length |
| 0xB000005F | URB 函数无效 |
Invalid URB Function |
| 0xB0000060 | 启动 IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION |
Start IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION |
| 0xB0000061 | 完成 IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION |
Complete IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION |
| 0xB0000062 | 正在调用空闲通知回调 |
Invoking Idle Notification Callback |
| 0xB0000064 | 2.0 端口的端口状态 |
Port Status for 2.0 Port |
| 0xB0000065 | 3.0 端口的端口状态 |
Port Status for 3.0 Port |
| 0xB0000066 | 为端口评估 ACPI UPC 方法时出错(_U) |
Error Evaluating ACPI _UPC Method for Port |
| 0xB0000067 | 为端口评估 ACPI PLD 方法时出错(_P) |
Error Evaluating ACPI _PLD Method for Port |
| 0xB000006E | 状态机事件 |
State Machine Event |
| 0xB000006F | 未处理的状态机事件 |
Unhandled State Machine Event |
| 0xB0000078 | 启动集线器重置请求 |
Start of Hub Reset Request |
| 0xB0000079 | 完成启动集线器重置请求 |
Completion of Start Hub Reset Request |
| 0xB000007A | 由于端口错误而发出的集线器重置请求 |
Hub Reset Request Due to Port Error |
| 0xB000007B | 端口更改请求期间出错 |
Failure during Port Change Request |
| 0xB0000082 | 集线器控制传输错误 |
Hub Control Transfer Error |
| 0xB0000083 | 端口控制传输错误 |
Port Control Transfer Error |
| 0xB0000084 | 设备控制传输错误 |
Device Control Transfer Error |
| 0xB0000085 | 状态更改中断传输错误 |
Status Change Interrupt Transfer Error |
| 0xB0000086 | SuperSpeed 集线器已进入无效的电源状态，因为它不支持远程唤醒和选择性暂停 |
SuperSpeed Hub Entered Invalid Power State as It Does Not Support Remote Wake and Selective Suspend |
| 0xB000008C | 完成 IOCTL_USB_GET_NODE_INFORMATION |
Completion of IOCTL_USB_GET_NODE_INFORMATION |
| 0xB000008D | 完成 IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME |
Completion of IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME |
| 0xB000008E | 完成 IOCTL_USB_GET_NODE_CONNECTION_INFORMATION |
Completion of IOCTL_USB_GET_NODE_CONNECTION_INFORMATION |
| 0xB000008F | 完成 IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX |
Completion of IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX |
| 0xB0000090 | 完成 IOCTL_USB_GET_NODE_CONNECTION_ATTRIBUTES |
Completion of IOCTL_USB_GET_NODE_CONNECTION_ATTRIBUTES |
| 0xB0000091 | 完成 IOCTL_USB_GET_NODE_CONNECTION_NAME |
Completion of IOCTL_USB_GET_NODE_CONNECTION_NAME |
| 0xB0000092 | 启动 IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION |
Start of IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION |
| 0xB0000093 | 完成 IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION |
Completion of IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION |
| 0xB0000094 | 完成 IOCTL_USB_GET_HUB_CAPABILITIES |
Completion of IOCTL_USB_GET_HUB_CAPABILITIES |
| 0xB0000095 | 完成 IOCTL_USB_GET_HUB_CAPABILITIES_EX |
Completion of IOCTL_USB_GET_HUB_CAPABILITIES_EX |
| 0xB0000096 | 启动 IOCTL_USB_HUB_CYCLE_PORT |
Start of IOCTL_USB_HUB_CYCLE_PORT |
| 0xB0000097 | 完成 IOCTL_USB_HUB_CYCLE_PORT |
Completion of IOCTL_USB_HUB_CYCLE_PORT |
| 0xB0000098 | 完成 IOCTL_USB_RESET_HUB |
Completion of IOCTL_USB_RESET_HUB |
| 0xB0000099 | 完成不受支持的 IOCTL |
Completion of Unsuppported IOCTL |
| 0xB000009A | 完成 IOCTL_USB_GET_PORT_CONNECTOR_PROPERTIES |
Completion of IOCTL_USB_GET_PORT_CONNECTOR_PROPERTIES |
| 0xB000009B | 完成 IOCTL_USB_GET_HUB_INFORMATION_EX |
Completion of IOCTL_USB_GET_HUB_INFORMATION_EX |
| 0xB000009C | 完成 IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 |
Completion of IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 |
| 0xB000009D | UCX IOCTL 失败 |
UCX IOCTL Failed |
| 0xB00000A0 | 请求设备描述符失败 |
Request for Device Descriptor Failed |
| 0xB00000A1 | 设置地址请求失败 |
Set Address Request Failed |
| 0xB00000A2 | 请求配置描述符失败 |
Request for Configuration Descriptor Failed |
| 0xB00000A3 | 设置 SEL 请求失败 |
Set SEL Request Failed |
| 0xB00000A4 | 请求 BOS 描述符失败 |
Request for BOS Descriptor Failed |
| 0xB00000A5 | 请求设备限定符描述符失败 |
Request for Device Qualifier Descriptor Failed |
| 0xB00000A6 | 请求序列号字符串描述符失败 |
Request for Serial Number String Descriptor Failed |
| 0xB00000A7 | 请求产品 ID 字符串描述符失败 |
Request for Product ID String Descriptor Failed |
| 0xB00000A8 | 请求 Microsoft 操作系统扩展配置描述符失败 |
Request for Microsoft OS Extended Configuration Descriptor Failed |
| 0xB00000A9 | 请求 Microsoft 操作系统容器 ID 描述符失败 |
Request for Microsoft OS Container ID Descriptor Failed |
| 0xB00000AA | 设置 Isoch 延迟的设备控制传输失败 |
Device Control Transfer for Set Isoch Delay Failed |
| 0xB00000AB | 请求语言 ID 字符串描述符失败 |
Request for Language ID String Descriptor Failed |
| 0xB00000AC | 无法访问注册表 |
Unable to Access Registry |
| 0xB00000AD | 2.0 总线上的 SuperSpeed 设备已连接 |
SuperSpeed Device is Connected on the 2.0 Bus |
| 0xB00000AE | 集线器超出重置限制。正在状态机中声明 PNP 错误。 |
Hub Exceeded Reset Limit. Declaring a PNP failure in the State Machine. |
| 0xB00000AF | 设备支持接口 0 中的远程唤醒，但不支持配置描述符中的远程唤醒 |
Device Supports Remote Wake in Interface 0. But Does Not Report Remote Wake in the Configuration Descriptor |
| 0xB00000B0 | 描述符验证失败 |
Descriptor Validation Failure |
| 0xB00000B1 | 正在重新枚举设备。此枚举对 PnP 管理器不可见 |
Device getting Re-Enumerated. This Enumeration is not Visible to PnP Manager |
| 0xB00000B2 | 新序列号与缓存的序列号不匹配 |
New Serial Number does not match Cached Serial Number |
| 0xB00000B3 | 客户端已启动恢复操作 |
Client Initiated Recovery Action |
| 0xB00000B4 | 查询设备的 USB 功能 |
Query USB capability for device |
| 0xB00000B5 | 请求 Microsoft 操作系统 2.0 描述符集失败 |
Request for Microsoft OS 2.0 Descriptor Set Failed |
| 0xB00000B6 | Microsoft 操作系统 2.0 设置备用枚举命令失败 |
Microsoft OS 2.0 Set Alternate Enumeration Command Failed |
| 0xB00000B7 | U1 的设置功能启用失败 |
Set Feature for U1 Enable Failed |
| 0xB00000B8 | U2 的设置功能启用失败 |
Set Feature for U2 Enable failed |
| 0xB00000B9 | 描述符验证警告 |
Descriptor Validation Warning |
| 0xB00000BA | 检测到广告牌 |
Billboard Detected |
| 0xB00000BB | 备用模式失败 |
Alternate Mode Failed |
| 0xB00000BC | 输入的备用模式 |
Alternate Mode Entered |
| 0xB00000BD | 请求获取广告牌的其他信息 URL 字符串描述符失败 |
Request for Billboard Additional Information Url String Descriptor Failed |
| 0xB00000BE | 请求获取备用模式字符串描述符失败 |
Request for Alternate Mode String Descriptor Failed |
| 0xB00000BF | 对广告牌字符串描述符的验证失败 |
Validation Failure of Billboard String Descriptor |
| 0xB00000C0 | 对备用模式字符串描述符的验证失败 |
Validation Failure of Alternate Mode String Descriptor |
| 0xD0000001 | ControllerParentBusTypePci |
ControllerParentBusTypePci |
| 0xD0000002 | ControllerParentBusTypeAcpi |
ControllerParentBusTypeAcpi |
| 0xD0000003 | ControllerParentBusTypeMaUsb |
ControllerParentBusTypeMaUsb |
| 0xD0000004 | SurpriseRemovalInitiated |
SurpriseRemovalInitiated |
| 0xD0000005 | SkippedAsDeviceIsAHub |
SkippedAsDeviceIsAHub |
| 0xD0000006 | SkippedAsCouldNotReadSettings |
SkippedAsCouldNotReadSettings |
| 0xD0000007 | SkippedAsDisabledInSettingsPanel |
SkippedAsDisabledInSettingsPanel |
| 0xD0000008 | SkippedAsHackflagSet |
SkippedAsHackflagSet |
| 0xD0000009 | SkippedAsRecentIoObservered |
SkippedAsRecentIoObservered |
| 0xD000000A | SkippedAsAlreadyMarkedForRemoval (设备拒绝了上次尝试) |
SkippedAsAlreadyMarkedForRemoval (Device vetoed previous attempt) |
| 0xD000000B | SkippedAsUnableToRegisterIrCallback |
SkippedAsUnableToRegisterIrCallback |
| 0xD000000C | SkippedAsIoRequestDeviceRemovalForResetFailed |
SkippedAsIoRequestDeviceRemovalForResetFailed |
| 0xD000000D | SkippedAsAcquireRemoveLockFailed |
SkippedAsAcquireRemoveLockFailed |
| 0xD000000E | SkippedAsWorkItemCreateFailed |
SkippedAsWorkItemCreateFailed |
| 0xD000000F | UnknownState |
UnknownState |