If an error occurred or the following message in Chinese (Traditional) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.
| id |
Chinese (Traditional) |
English |
| 0x40050003 | 部分的韌體組態資訊不完整，因此使用了預設值。 |
Some firmware configuration information was incomplete, so defaults were used. |
| 0x40050004 | 使用者設定資料正在覆寫韌體組態資料。 |
User configuration data is overriding firmware configuration data. |
| 0x4005000B | 信號緩衝區 (儲存送進來的鍵盤資料) 已經溢出 (緩衝區的大小可以從登錄中設定)。 |
The ring buffer that stores incoming keyboard data has overflowed (buffer size is configurable via the registry). |
| 0x80050005 | 無法建立 %1 的裝置對應項目。 |
Unable to create the device map entry for %1. |
| 0x80050006 | 無法刪除 %1 的裝置對應項目。 |
Unable to delete the device map entry for %1. |
| 0x8005000E | 驅動程式無法取得建立正確的 WaitWake IRP 所需的資源。 |
The driver could not obtain resources required to create a propper WaitWake IRP. |
| 0xC0050001 | 記憶體不足，無法為裝置 %1 配置所需的內部存放。 |
Not enough memory was available to allocate internal storage needed for the device %1. |
| 0xC0050002 | 記憶體不足，無法配置記憶體給信號緩衝區 (保留 %1 內送資料的地方)。 |
Not enough memory was available to allocate the ring buffer that holds incoming data for %1. |
| 0xC0050007 | 找不到一個或一個以上鍵盤連接埠裝置的裝置物件。 |
Could not locate the device object for one or more keyboard port devices. |
| 0xC0050008 | 無法連線到連接埠裝置 %1。 |
Could not connect to port device %1. |
| 0xC0050009 | 無法在已連線的連接埠裝置 %1 上啟用插斷設定。 |
Could not enable interrupts on connected port device %1. |
| 0xC005000A | 無法在已連線的連接埠裝置 %1 上停用插斷設定。 |
Could not disable interrupts on connected port device %1. |
| 0xC005000C | 裝置 %1 的驅動程式發生內部的驅動程式錯誤。 |
The driver for device %1 encountered an internal driver error. |
| 0xC005000D | 驅動程式無法建立必要的裝置物件。 |
The driver could not create the required device object. |
| 0xC005000F | 無法貼附到 PnP 裝置堆疊。 |
Could not attach to the PnP device stack. |