iassdo.dll.mui NPS SDO 组件 fcf8f1f0865c1d61eea657e434736fb8

File info

File name: iassdo.dll.mui
Size: 19456 byte
MD5: fcf8f1f0865c1d61eea657e434736fb8
SHA1: 58e57e5b6392879293a6365ded8c316fc1664c6f
SHA256: bf693f8a10ae7dba103380578743f9c2cd773a63e6c2b4a1e10ff3c91e58b324
Operating systems: Windows 10
Extension: MUI

Translations messages and strings

If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id Chinese (Simplified) English
1指定用户请求身份验证。 Specifies the user requesting authentication.
2指定请求身份验证的用户的密码。 Specifies the password of the user requesting authentication.
3指定请求身份验证的 CHAP 用户的密码。 Specifies the password of the CHAP user requesting authentication.
4指定发出请求的 NAS 的 IP 地址(只适用于 NPS)。 Specifies the IP address of the NAS where the request originates (NPS only).
5指定发出请求的 NAS 的物理端口号。 Specifies the physical port number of the NAS where the request originates.
6指定用户请求的服务类型。 Specifies the type of service that the user has requested.
7指定使用的协议。 Specifies the protocol that is used.
8指定为用户配置的帧地址。 Specifies the framed address that is configured for the user.
9指定为用户配置的 IP 子网掩码。 Specifies the IP subnet mask that is configured for the user.
10指定用户使用的路由方法。 Specifies the routing method that is used by the user.
11指定请求身份验证的用户的筛选器列表名称。 Specifies the name of filter list for the user requesting authentication.
12指定为用户配置的最大传输单位(MTU)。 Specifies the maximum transmission unit (MTU) that is configured for the user.
13指定使用的压缩协议。 Specifies the compression protocol that is used.
14指定用户应该连接到的主机的 IP 地址。 Specifies the IP address of the host to which the user should connect.
15指定将用户连接到主机的服务。 Specifies the service that connects the user to the host.
16指定用户应该连接到的 TCP 端口。 Specifies the TCP port to which the user should connect.
18指定身份验证请求被接受或拒绝时给用户显示的消息。 Specifies the message displayed to the user when the authentication request is accepted or rejected.
19指定回拨电话号码。 Specifies the callback phone number.
20指定 NAS 呼叫的位置名。 Specifies the name of a location called by the NAS.
22指定在 NAS 上为用户配置的路由信息。 Specifies the routing information that is configured on the NAS for the user.
23指定在 NAS 上为用户配置的 IPX 网络号码。 Specifies the IPX network number configured on the NAS for the user.
24指定在访问质询数据包中发送给客户端的属性。 Specifies the attribute sent to the client in an Access-Challenge packet.
25指定记帐记录分类。 Specifies the classification of accounting records.
26分类专有 NAS 性能支持。 Specifies the support of proprietary NAS features.
27支持会话终止前的时间长度(以秒为单位)。 Specifies the length of time, in seconds, before the session is terminated.
28指定会话终止前的空闲时间长度(以秒为单位)。 Specifies the length of idle time, in seconds, before the session is terminated.
29指定服务完成时 NAS 应该进行的操作。 Specifies the action that the NAS should take when service is completed.
30指定用户拨的电话号码。 Specifies the phone number dialed by the user.
31指定呼叫方的电话号码。 Specifies the phone number from which the call originated.
32指定标识发出请求的 NAS 的字符串(只适用于 NPS)。 Specifies the string that identifies the NAS that originated the request (NPS only).
33指定转发访问请求数据包时代理服务器发送的字符串。 Specifies the string sent by the proxy server when forwarding an Access-Request packet.
34指定被本地传输(LAT)服务将用户连接到的主机。 Specifies the host to which user is connected by the Local Area Transport (LAT) service.
35指定被本地传输(LAT)服务把用户连接到的节点。 Specifies the node to which user is connected by the Local Area Transport (LAT) service.
36指定用户身份验证的本地传输(LAT)组编码。 Specifies the Local Area Transport (LAT) group codes for which the user is authorized.
37指定链接到用户的 AppleTalk 网络号码。只有当用户是路由器时才适用。 Specifies the AppleTalk network number for the link to the user. This only applies when the user is a router.
38指定 NAS 必须查询来分配用户的 AppleTalk 节点的 AppleTalk 网络号码。 Specifies the AppleTalk network number that the NAS must query to allocate the user's AppleTalk node.
39指定用户的 AppleTalk 默认区域。 Specifies the AppleTalk default zone for the user.
40指定记帐数据包是否开始或停止搭桥路由或终端服务器会话 Specifies whether the Accounting packet starts or stops a bridging, routing or terminal server session
41指定 NAS 一直在发送的记帐数据包的时间长度,以秒为单位。 Specifies the length of time, in seconds, for which the NAS has been sending the same accounting packet.
42指定会话期间接收到的 octets 数。 Specifies the number of octets received during the session.
43指定会话期间发送的 octets 数。 Specifies the number of octets sent during the session.
44指定唯一的数字字符串来识别服务器会话。 Specifies the unique numeric string that identifies the server session.
45指定哪个服务器验证了传入的呼叫。 Specifies which server authenticated an incoming call.
46指定会话已经活动的时间长度(以秒为单位)。 Specifies the length of time, in seconds, for which the session has been active.
47指定会话期间接收到的数据包数。 Specifies the number of packets received during the session.
48指定会话期间发送的数据包数。 Specifies the number of packets sent during the session.
49指定连接被中断的原因。 Specifies the reason that a connection was terminated.
50指定唯一的数字字符串来识别多链路会话。 Specifies the unique numeric string that identifies the multilink session.
51指定多链路会话中的链接数。 Specifies the number of links in a multilink session.
52指定 Acct-Input-Octets 计数器达到 4,294,967,295 然后重置到 0 的次数。 Specifies the number of times that the Acct-Input-Octets counter has reached 4,294,967,295 and been reset to 0.
53指定 Acct-Output-Octets 计数器达到 4,294,967,295 然后重置到 0 的次数。 Specifies the number of times that the Acct-Output-Octets counter has reached 4,294,967,295 and been reset to 0.
55指定此属性包含在记帐请求数据包中,记录在 NAS 上发生的特定事件的时间。此时间从1970年1月1日午夜开始计算,以秒为单位。 Specifies that this attribute is included in an Accounting-Request packet to record the time that a specific event occurred on the NAS. The time is denoted in seconds, since midnight of January 1, 1970.
60指定 NAS 发送到 CHAP 用户的 CHAP 质询。 Specifies the CHAP challenge sent by the NAS to the CHAP user.
61指定发出请求的 NAS 使用的实际端口的类型。 Specifies the type of physical port that is used by the NAS originating the request.
62指定 NAS 提供给用户的最大端口数。 Specifies the maximum number of ports that the NAS provides to the user.
63指定被本地传输(LAT)连接到用户的端口。 Specifies the port with which the user is connected by Local Area Transport (LAT).
64指定使用的隧道协议。 Specifies the tunneling protocols used.
65指定可以在多重传输上操作的,创建协议的隧道(例如 L2TP)时使用的传输媒体。 Specifies the transport medium used when creating a tunnel for protocols (for example, L2TP) that can operate over multiple transports.
66指定隧道起始端的 IP 地址。 Specifies the IP address of the initiator end of the tunnel.
67指定隧道服务器端的 IP 地址。 Specifies the IP address of the server end of the tunnel.
69指定用于对远程服务器身份验证的密码。 Specifies the password used for authenticating to a remote server.
70指定 AppleTalk Remote Access Protocol (ARAP) 的用户密码。 Specifies the user password for AppleTalk Remote Access Protocol (ARAP).
71指定 NAS 发送给 AppleTalk Remote Access Protocol (ARAP) 标志数据包中的用户的信息。 Specifies the information that the NAS sends to the user in the AppleTalk Remote Access Protocol (ARAP) flags packet.
72指定 AppleTalk Remote Access Protocol (ARAP) 区域列表被使用的方式。 Specifies the way in which the AppleTalk Remote Access Protocol (ARAP) zone list is used.
73指定 Access-Challenge 数据包中使用的 AppleTalk Remote Access Protocol (ARAP) 的安全模块。 Specifies the AppleTalk Remote Access Protocol (ARAP) security module used in an Access-Challenge packet .
74指定 AppleTalk Remote Access Protocol (ARAP) 的安全模块的质询或响应。 Specifies the AppleTalk Remote Access Protocol (ARAP) security module challenge or response.
75指定在 NAS 终止连接前用户身份验证的尝试次数。 Specifies the number of times the user can try to be authenticated before the NAS terminates the connection.
76指定 NAS 是否显示用户输入的响应。 Specifies to the NAS whether or not it should echo the user's response as it is typed.
77指定用户连接的方式。 Specifies the nature of the user's connection.
78指定使用的用户配置文件的类型。此配置文件放在 Access-Accept 数据包中,从 RADIUS 代理服务器发送到 RADIUS 代理客户端,而不是发送到 NAS。 Specifies the type of user profile used. This profile is sent in an Access-Accept packet from a RADIUS proxy server to a RADIUS proxy client (not to a NAS).
79指定 Extensible Authentication Protocol (EAP) 的编码信息,允许拨入用户使用 EAP 来作身份验证,而不在 NAS 上履行 EAP。 Specifies the encoding of Extensible Authentication Protocol (EAP) information to allow dial-in users to use EAP to authenticate without implementing EAP on the NAS.
80指定签署访问请求数据包,防止对 CHAP、ARAP 或 EAP 身份验证方法的字典攻击。 Specifies that Access-Request packets are signed to prevent dictionary attacks on CHAP, ARAP, or EAP authentication methods.
81指定隧道会话的组 ID。 Specifies the Group ID for a tunneled session.
82指定会话分配到的隧道。 Specifies the tunnel to which a session is assigned.
83指定当一个以上的隧道属性组传回给隧道起始端时,分配给每个隧道的相对优先设定。 Specifies the relative preference assigned to each tunnel when more than one set of tunneling attributes is returned to the tunnel initiator.
85指定每次 NAS 所传送的暂时更新之间的间隔长度 (以秒表示)。 Specifies the length of the interval (in seconds) between each interim update that the NAS sends.
86指定在给定链路上丢失的数据包数。 Specifies the number of packets that are lost on a given link.
87指定使用文本字符串来验证用户的 NAS 连接端口。 Specifies the port of the NAS that authenticates the user by using a text string.
88指定应该用来分配地址给用户的分配地址池的名称。 Specifies the name of an assigned address pool that should be used to assign an address for the user.
90指定在通道建立的身份验证阶段中,隧道起始端所使用的名称。 Specifies the name used by the tunnel initiator during the authentication phase of tunnel establishment.
91指定在隧道建立的身份验证阶段中,隧道终端所使用的名称。 Specifies the name used by the tunnel terminator during the authentication phase of tunnel establishment.
108指定递增 NAS 回拨用户前的延迟 (以秒表示)。 Specifies the delay (in seconds) before the Ascend NAS calls the user back.
120指定递增 NAS 正在使用的调制解调器连接端口号码。 Specifies the port number for the modem that the Ascend NAS is using.
121指定递增 NAS 正在使用的调制解调器插槽编号。 Specifies the slot number for the modem that the Ascend NAS is using.
122指定递增 NAS 正在使用的调制解调器板架编号。 Specifies the shelf number for the modem that the Ascend NAS is using.
125指定递增 NAS 终止连接前的最长时间 (以分表示)。 Specifies the maximum time (in minutes) before the Ascend NAS terminates a connection.
126指定递增 NAS 的路由喜好设定。 Specifies the route preference for the Ascend NAS.
131指定是否允许拨出访问。 Specifies whether dial-out access is allowed.
132指定递增 NAS 使用的网关。 Specifies the gateway used by the Ascend NAS.
135指定递增 NAS 使用的主要 DNS 名称。 Specifies the primary DNS name used by the Ascend NAS.
136指定递增 NAS 使用的次要 DNS 名称。 Specifies the secondary DNS name used by the Ascend NAS.
139指定用户在其上拥有帐户的服务器 IP 地址。 Specifies the IP address of the server on which the user has an account.
141指定用户在其上拥有帐户的服务器共用密码。 Specifies the shared secret of the server on which the user has an account.
152指定用户是递增 NAS 的多播客户端。 Specifies that the user is a multicast client of the Ascend NAS.
153指定递增 NAS 接受另一个来自多播客户端的数据包前的等待时间 (以秒表示)。 Specifies the time (in seconds) that the Ascend NAS waits before accepting another packet from a multicast client.
154指定正用于本机编号接口的子网掩码。 Specifies the subnet mask that is being used for the local numbered interface.
155指定在链接远端的编号接口的 IP 地址。 Specifies the IP address of the numbered interface at the remote end of a link.
156指定用户配置文件为一终结点的永久虚拟电路 (PVC)。 Specifies the permanent virtual circuit (PVC) for which the user profile is an endpoint.
157指定在框架转接配置文件中,框架转接链接是否会自动启用。 Specifies whether the Frame Relay link becomes available automatically in a Frame Relay profile.
158指定在框架转接配置文件内,一组永久虚拟电路 (PVC) 的关联。 Specifies the association of a group of permanent virtual circuits (PVCs) within the Frame Relay profile.
159指定框架转接配置文件所使用的连接类型。 Specifies the type of connection that is used by the Frame Relay profile.
160指定在框架转接配置文件中,递增 NAS 及框架转接切换之间所使用的链接管理协议。 Specifies the link management protocol that is used between the Ascend NAS and the Frame Relay switch in a Frame Relay profile.
161指定在框架转接配置文件中,递增 NAS 要求完整状态报告的间隔 (以秒表示)。 Specifies the interval (in seconds) between Ascend NAS requests for full status reports in a Frame Relay profile.
162指定在 Ascend-FR-DCE-N393-monitored 事件期间发生的错误数,使网络停止用户发起的进程。 Specifies the number of errors that occurred during Ascend-FR-DCE-N393-monitored events, causing the network to render user-originating procedures inactive.
163指定在 Ascend-FR-DCE-N393-monitored 事件期间发生的错误数,使用户停止网络发起的进程。 Specifies the number of errors that occurred during Ascend-FR-DTE-N393-monitored events, causing the user to render the network-originating procedures inactive.
164指定监视 DCE 的事件计数。如果无法取得 Ascend-FR-DCE-N393 的属性值,链接会被视为使用中。 Specifies the DCE-monitored event count. A link is considered active if the value of the Ascend-FR-DCE-N393 attribute is not reached.
165指定监视 DTE 的事件计数。如果无法取得 Ascend-FR-DTE-N393 的属性值,链接会被视为使用中。 Specifies the DTE-monitored event count. A link is considered active if the value of the Ascend-FR-DTE-N393 attribute is not reached.
166指定链接整合验证轮询计时器 (以秒表示)。 Specifies the Link Integrity Verification polling timer (in seconds).
167指定在状态查询讯息间的单位等候时间。 Specifies the time that the unit waits between Status Inquiry messages.
169指定终端服务器连接在递增 NAS 中断工作阶段连接前,必须闲置的时间长度 (以秒表示)。 Specifies the length of time (in seconds) that a terminal server connection must be idle before the Ascend NAS disconnects the session.
170指定递增 NAS 是否使用终端服务器闲置计时器,以及如果使用,是否在递增 NAS 中断工作阶段连接前,用户和主机都必须是在闲置状态。 Specifies whether the Ascend NAS uses a terminal server idle timer and, if it does, whether both the user and the host must be idle before the Ascend NAS disconnects the session.
171指定递增 NAS 用来监视多重链接协议 Plus (MP+) 呼叫的流量的方法。 Specifies the method that the Ascend NAS uses to monitor traffic on a Multilink Protocol Plus (MP+) call.
172指定当起始特定呼叫时,递增 NAS 所建立的隧道初始数目。 Specifies the initial number of channels created by an Ascend NAS when originating certain calls.
173指定用在多重链接协议 Plus (MP+) 呼叫的最少隧道数目。 Specifies the minimum number of channels that are used in a Multilink Protocol Plus (MP+) call.
174指定静态 IPX 路由 (只适用于递增) 的设定。 Specifies the configuration of a static IPX route (Ascend only).
175指定 NAS 是否初始 FT1-AIM 或 FT1-BO 呼叫,或等候远端来初始这些呼叫(&O)。 Specifies whether the NAS initiates FT1-AIM or FT1-B&O calls or waits for a remote end to initiate such calls.
176为永久链接指定备份配置文件的配置文件名称。 Specifies the profile name of a backup profile for a permanent link.
177指定所使用的永久连接类型。 Specifies the type of permanent connection used.
178指定 WAN 链接所使用的永久虚拟电路 (PVC)。 Specifies the permanent virtual circuits (PVCs) that are used by the WAN link.
179指定识别连接配置文件为框架转接切换的数据链接连接标识符(DLCI)。 Specifies the Data Link Connection Identifier (DLCI) that identifies the connection profile to the Frame Relay switch.
180指定这个连接的框架转接配置文件的名称。 Specifies the name of the Frame Relay profile for this connection.
181指定 AppleTalk 远程访问连接上,连入呼叫者的密码。 Specifies the password of the incoming caller on an AppleTalk remote access connection.
182指定唯一的 IPX 节点地址。 Specifies the unique IPX node address.
183指定 ATMP 操作中,主目录代理程序的 IP 地址。 Specifies the IP address of the home agent in an ATMP operation.
184指定 ATMP 操作中,远端代理程序传送给主目录代理程序的密码。 Specifies the password sent by the remote agent the to home agent in an ATMP operation.
185指定连接配置文件,通过它,主目录代理程序会传送由 ATMP 操作中的可移动节点所接收的数据包。 Specifies the connection profile, through which the home agent sends packets that are received by a mobile node in ATMP operation.
186指定传送讯息给主目录代理程序的 UDP 连接端口远端代理程序。 Specifies the UDP port remote agent that sends messages to the home agent.
187指定多重链接束的识别码(多重隧道多重链接协议或多重链接协议 Plus 呼叫)。 Specifies the ID of a Multilink bundle (multichannel Multilink Protocol or Multilink Protocol Plus call).
188指定在多重链接束中所剩余的工作阶段数目(多重隧道多重链接协议或多重链接协议 Plus 呼叫)。这个信息会在 Accounting-Stop 数据包中报告。 Specifies the number of sessions that remain in a Multilink bundle (multichannel Multilink Protocol or Multilink Protocol Plus call). This information is reported in an Accounting-Stop packet.
189指定通过验证连接接收到的第一个数据包的目的地 IP 地址。 Specifies the destination IP address of the first packed received through an authenticated connection.
190身份验证前,请指定接收的输入八进制位的数目。 Specifies the number of input octets that are received before authentication.
191身份验证前,请指定发送的输出八进制位的数目。 Specifies the number of output octets that are sent before authentication.
192身份验证前,请指定接收的输入数据包数目。 Specifies the number of input packets that are received before authentication.
193身份验证前,请指定发送的输出数据包数目。 Specifies the number of output packets that are sent before authentication.
194指定递增 NAS 终止工作阶段前的时间长度 (以秒表示)。 Specifies the length of time (in seconds) before the session is terminated by the Ascend NAS.
196指定连接终止前的状态。 Specifies the state of the connection before it is terminated.
197指定连接的数据速率 (位/秒)。 Specifies the data rate of the connection (in bits per second).
198指定呼叫连接时间和身份验证完成时间之间的时间长度 (以秒表示)。 Specifies the length of time (in seconds) between the time that a call connects and the time that authentication is complete.
199指定如果呼叫闲置,验证间快取权杖保持存留的时间长度 (以分钟表示)(只适用于递增 NAS)。 Specifies the length of time (in minutes) for which a cached token can remain alive between authentications if a call is idle (Ascend NAS only).
200指定 RADIUS 用来处理密码的方法,这些密码接收自被要求使用手持安全卡服务器的用户。 Specifies the method that RADIUS uses to handle passwords that received from users who are required to use a hand-held security card server.
201指定 Called Line Identification (CLID)-已通过身份验证的呼叫,是否需要其他的身份验证 (只适用于递增 NAS)。 Specifies whether additional authentication is required for Called Line Identification (CLID)-authenticated calls (Ascend NAS only).
202指定在类属性中,所指定的类别类型其使用中工作阶段的数目。 Specifies the number of active sessions of the type of class specified in the Class attribute.
203指定 PPP 身份验证的递增 NAS 登入名称。 Specifies the Ascend NAS login name for PPP authentication.
204指定快取权杖或手持安全卡身份验证的存留时间(只适用于递增 NAS)。 Specifies the lifetime of cached token or hand-held security card authentication (Ascend NAS only).
205在终端服务器功能表中,指定用户输入的提示(只适用于递增 NAS)。 Specifies the prompt for user input in the terminal server menu (Ascend NAS only).
206指定递增 NAS 用户配置文件的单一功能表项目。 Specifies a single menu item for an Ascend NAS user profile.
208指定用户密码的有效天数(只适用于递增 NAS)。 Specifies the number of days for which user's password is valid (Ascend NAS only).
209指定递增 NAS 从用户重新导向数据包目的地的 IP 地址。 Specifies the IP address to which Ascend NAS redirects packets from the user.
210指定递增 PPP 执行在传送经由 Van Jacobsen 压缩的数据包时,不能使用插槽压缩。 Specifies that the Ascend PPP implementation must not use slot compression when sending packets that are compressed through Van Jacobsen compression.
211指定递增 PPP 执行必须使用 0x0037 数值于 Van Jacobsen 压缩类型。 Specifies that the Ascend PPP implementation must use the value of 0x0037 value for the Van Jacobsen compression type.
212指定在 PPP 会话过程中,递增 PPP 执行必须使用的非同步控制字符映射表(只适用于递增 NAS)。 Specifies the async control character map that the Ascend PPP implementation must use during the PPP session (Ascend NAS only).
213指定用户输入的其他提示 (登入及密码提示之外)(只适用于递增 NAS)。 Specifies an additional prompt (other than the login and password prompts) for user input (Ascend NAS only).
214指定当密码在 RADIUS 服务器和递增 NAS 之间传递时,要被加密。这个属性用来取代 Ascend-Send-Passwd。 Specifies that the password is encrypted when passed between the RADIUS server and the Ascend NAS. This attribute is used in place of Ascend-Send-Passwd.
215指定自拨入用户处接收到,用来确认加密密码的数值。 Specifies the value received from the dial-in user that is used to verify the encrypted password.
216指定 IPX 路由器的模式。 Specifies the mode of the IPX router.
217指定动态指派的 IP 地址池。 Specifies an IP address pool for dynamic assignment.
218指定用户必须用于动态地址指派的 IP 地址池的索引编号。 Specifies the index number of the IP address pool that the user must use for dynamic address assignment.
219指定连接配置文件是否使用框架转接重新导向模式(只适用于递增 NAS)。 Specifies whether the connection profile uses Frame Relay redirect mode (Ascend NAS only).
220指定框架转接配置文件的名称。 Specifies the name of the Frame Relay profile.
221指定框架转接重新导向连接中,用户配置文件的数据链接连接标识符(DLCI)的存在。 Specifies the presence of a Data Link Connection Identifier (DLCI) for the user profile in a Frame Relay redirect connection.
222指定 IPX 桥接期间,递增 NAS 用来处理 IPX Watchdog 协议要求的方法。 Specifies the method that the Ascend NAS uses to handle IPX Watchdog protocol requests during IPX bridging.
223指定递增 NAS 回应 IPX Watchdog 协议要求的时间长度(以分钟表示)。 Specifies the length of time (in minutes) for which an Ascend NAS responds to IPX Watchdog protocol requests.
224指定当连接到要求编号接口的 IPX 路由器时,NAS 所使用的 IPX 地址。 Specifies the IPX address that is used by the NAS when connecting to IPX routers that require numbered interfaces.
225指定路由的虚拟跃点数目。 Specifies the virtual hop count of the route.
226指定 MAX 所拨的电话号码类型。 Specifies the type of phone number that the MAX dials.
227指定递增 NAS 所拨号以连接位于链接远端的桥接器、路由器、或节点的电话号码。 Specifies the phone number that the Ascend NAS dials to reach the bridge, router, or node at the remote end of the link.
228指定已启用 IP 路由。 Specifies that IP routing is enabled.
229指定已启用 IPX 路由。 Specifies that IPX routing is enabled.
230指定用于目前连接,而与协议无关的桥接。 Specifies that protocol-independent bridging is used for the current connection.
231指定用于名称-密码身份验证的协议(在 Called Link Identification [CLID] 身份验证之后) Specifies the protocol used for name-password authentication (following Called Link Identification [CLID] authentication).
232指定拨出电话中,NPS 传送到连接远端的密码。 Specifies the password sent by NPS to the remote end of a connection on outgoing calls.
234指定递增 NAS 新增或减少带宽前的带宽使用百分比。 Specifies the percentage of bandwidth used, after which the Ascend NAS adds or subtracts bandwidth.
235指定在多重链接协议 Plus (MP+) 呼叫中,所允许的最多隧道数目。 Specifies the maximum number of channels allowed on a Multilink Protocol Plus (MP+) call.
236指定呼叫期间,以手动或自动方式更改带宽时,递增 NAS 新增的隧道数目。 Specifies the number of channels that the Ascend NAS adds when bandwidth changes either manually or automatically during a call.
238指定递增 NAS 用做计算传输数据的平均线路利用(ALU),其范例的时间长度(以秒表示)。 Specifies the length of time (in seconds) that the Ascend NAS uses as a sample for calculating the average line utilization (ALU) for transmitted data.
239指定用于计算传输数据的平均线路利用(ALU),其动态带宽配置(DBA)演算法。 Specifies the Dynamic Bandwidth Allocation (DBA) algorithm used for calculating the average line utilization (ALU) for transmitted data.
240指定 Ascend NAS 添加带宽前,传输的数据量超出平均线路利用(ALU)的时间阀值(以秒为单位)。此阈值在 Ascend-Target-Util 属性中指定。 Specifies the threshold, in seconds, that the average line utilization (ALU) for transmitted data must exceed before the Ascend NAS adds bandwidth. This threshold is specified by the Ascend-Target-Util attribute.
241指定 Ascend NAS 减少带宽前,传输的数据量低于平均线路利用(ALU)的时间阀值(以秒为单位)。此阈值在 Ascend-Target-Util 属性中指定。 Specifies the threshold, in seconds, that the average line utilization (ALU) for transmitted data must fall below before the Ascend NAS removes bandwidth from a session. This threshold is specified by the Ascend-Target-Util attribute.
242指定递增 NAS 的数据筛选器。 Specifies the data filter for the Ascend NAS.
243指定递增 NAS 的呼叫筛选器。 Specifies the call filter for the Ascend NAS.
244指定当工作阶段在非使用中时,递增 NAS 等候清除呼叫之前的时间长度 (以秒表示)。 Specifies the length of time, in seconds, that the Ascend NAS waits before clearing a call when a session is inactive.
245指定使用闲置链接的其中一个通道于新呼叫之前,递增 NAS 等候的闲置秒数。 Specifies the number of idle seconds that the Ascend NAS waits before using one of the channels of an idle link for a new call.
246指定递增 NAS 上的回拨已启用或停用。 Specifies that callback is either enabled or disabled on the Ascend NAS.
247指定 Ascend NAS 使用的数据服务 Specifies the data service used by the Ascend NAS.
248指定递增 NAS 只使用通道的 56-KBps 部分 (即使所有 64 KBps 通道皆可使用)。 Specifies that the Ascend NAS use only the 56-Kbps portion of a channel (even when the full 64 Kbps channel is available for use).
249指定这个线路的收费付款号码。 Specifies the billing number for charges incurred on the line.
250指定 NAS 使用的 T1 PRI 服务 Specifies the T1 PRI service that is used by NAS.
251指定你通过 T1 PRI 线路,用于长途电话的 U.S Interexchange Carrier (IEC)。 Specifies the U.S Interexchange Carrier (IEC) that you use for long distance calls over a T1 PRI line.
252指定可以跟用户建立 Telnet 会话的主机的列表。 Specifies a list of hosts to which a user can establish a Telnet session.
253指定在 IPCP 交涉期间,对呼叫单位报告的 IP 地址。 Specifies the IP address reporting to the calling unit during IPCP negotiations.
254指定递增 NAS 在其下清除单一通道多重链接协议 Plus (MP+) 呼叫的带宽利用率。 Specifies the percentage of bandwidth utilization, below which the Ascend NAS clears a single-channel Multilink Protocol Plus (MP+) call.
4096指定为用户设定的框架地址 (仅限 NPS 内部使用)。 Specifies the framed address configured for the user (for NPS internal use only).
4097指定用于回拨的电话号码 (仅限 NPS 内部使用)。 Specifies the phone number used for callback (for NPS internal use only).
4099指定拨号起始处的电话号码 (仅限 NPS 内部使用)。 Specifies the phone number from which the call originated (for NPS internal use only).
4100指定在 NAS 上为用户设定的路由信息 (仅限 NPS 内部使用)。 Specifies the routing information configured on the NAS for the user (for NPS internal use only).
4101指定略过用户的拨入内容。 Specifies that the user's dial-in properties are ignored.
4102指定每周允许用户连接的时间和日期。 Specifies the time periods and days of week during which user is allowed to connect.
4104指定许可的连接连接端口类型。 Specifies the port types permitted for a connection.
4105指定许可的连接身份验证类型。 Specifies the authentication types permitted for a connection.
4106指定许可的连接 EAP 加密模式。 Specifies the EAP encryption modes that are permitted for a connection.
4107指定 NAS 所使用的共用密码。 Specifies the shared secret that is used by the NAS.
4108指定 RADIUS 客户端的 IP 地址(只适用于 NPS)。 Specifies the IP address of the RADIUS client (NPS only).
4116指定 RADIUS 代理或 NAS 的制造厂商(只适用于 NPS)。 Specifies the manufacturer of the RADIUS proxy or NAS (NPS only).
4117指定 NPS 用来与客户端通讯的连接端口。 Specifies the port that NPS uses to communicate with the client.
4127指定用来确认用户的身份验证配置。 Specifies the authentication scheme that is used to verify the user.
4128指定 RADIUS 客户端的友好名称(只适用于 NPS)。 Specifies the friendly name for the RADIUS client (NPS only).
4131指定用户所属的 Windows 群组。 Specifies the Windows groups that the user belongs to.
4132指定 EAP 的友好名称。 Specifies the EAP friendly name.
4149指定网络访问策略的友好名称。 Specifies the friendly name of the network access policy.
4158指定 NPS 是否自动产生类属性。默认地,NPS 自动产生类属性。 Specifies whether NPS automatically generates the class attribute. NPS automatically generates the class attribute by default.
4161指定当用 EAP-TLS 执行基于证书的身份验证时允许的证书目的或用法对象标识符(OID),以带小数点的十进制格式表示。 Specifies the certificate purpose or usage object identifiers (OIDs), in dotted decimal notation, that are allowed for when performing certificate-based authentication with EAP-TLS.
4162指定 Session-Timeout 属性被自动产生。 Specifies that the Session-Timeout Attribute is automatically generated.
4163指定 NPS 是否根据用户帐户截止日期和当天限制时段自动产生会话超时。默认地,NPS 不自动产生会话超时。 Specifies whether NPS automatically generates the session timeout based on user account expiration and time-of-day restrictions. NPS does not automatically generate the session timeout by default.
4165当连接处于限制的状态时,指定路由选择和远程访问服务使用的 IP 流量筛选器。 Specifies the IP traffic filter that is used by the Routing and Remote Access service when the connection is in a restricted state.
4166指定断开连接前连接处于限制状态的时间(秒)。 Specifies the time (in seconds) that the connection can remain in a restricted state before being disconnected.
4168指定启用 Windows 授权给被远程 RADIUS 服务器身份验证的用户(例如,和 Passport 用户映射一起使用)。 Specifies that Windows authorization is enabled for users authenticated by the remote RADIUS server (for example, use with Passport user mapping).
4169指定 Passport 的 UPN 前缀到 Windows 用户的映射。 Specifies the UPN suffix of the Passport to Windows user mapping.
4170为隧道指定标识符,根据此标识符对隧道的属性进行分组。 Specifies an identifier for a tunnel, by which the tunnel's attributes are grouped.
5000指定 Cisco AV Pair VSA。 Specifies the Cisco AV Pair VSA.
6000指定参数用于用户所传送的数据包的 Quality of Service 值。 Specifies the Quality of Service values that the switch uses for the packets sent by the user.
6001指定 IEEE 802.1p 内容数值。 Specifies the IEEE 802.1p priority value.
8110指定 DHCP 服务器将用于地址分配的 DHCP 用户类 Specifies the DHCP User Class to be used by the DHCP server for address assignment
8111指定进行请求的客户端的 NAP 限制状态 Specifies NAP restriction status of the client making the request
8120指定将网络限制应用于不符合的计算机之后的时间 Specifies the time after which network restriction is to be applied to noncompliant computers
8121指定分配给 NAP 客户端用于标识可用于用户的资源的 URL Specifies the URL given to the NAP client to identify a resource available to the user
8123指定与该请求关联的计算机无法提交 NAP 运行状况声明。 Specifies that the computer associated with this request is not capable of submitting a NAP health statement.
8124指定与该请求一起执行的 NAP 健康检查的结果 Specifies the result of the NAP health check performed with this request
8125指定评估该请求的系统健康验证程序列表 Specifies the list of System Health Validators evaluating this request
8132指定提交请求的网络访问服务器的类型 Specifies the type of network access server submitting the request
8133指定在其中处理该健康请求的会话。 Specifies the session in which this health request is being processed
8134指定将哪个预配置的 IPSec 策略应用于客户端的提示。 Specifies a hint for which pre-configured IPSec policy to apply to the client.
8135指定用于确定 HCEP 负载是否可以用于对数据进行加密和签名的提示。 Specifies a hint for determining whether the HCEP payload can be used for encrypting and signing data.
8136指定应该自动更新该计算机 Specifies that this machine should be automatically updated
8145指定 NAP 更新服务器的 IPv4 地址 Specifies the IPv4 addresses for NAP remediation servers
8146指定 NAP 更新服务器的 IPv6 地址 Specifies the IPv6 addresses for NAP remediation servers
8148指定请求客户端的硬件特性的清单列表 Specifies the inventory list of hardware characteristics of the requesting client
8149指定 Windows 操作系统版本信息 Specifies the Windows operating system version information
8150指定 NAP 运行状况声明 Specifies the NAP statement of health
8152指定客户端的 HCAP 位置组 Specifies the HCAP Location Group of the client
8153指定允许分配给客户端的其他健康状态 Specifies additional health states allowed to be assigned to the client
8155指定客户端提供的 HCAP 用户组属性 Specifies HCAP User Group attribute provided by the client.
8158指定用于标识 RAS 事务的 GUID Specifies the GUID used to identify a RAS transaction
44464Sdoias Sdoias
53464SdoMachine Class SdoMachine Class
55464SdoService Class SdoService Class
59464管理和 IETF RADIUS 协议兼容的 VPN、拨号、802.1x 无线或以太网交换机连接企图的身份验证、授权、审核和计帐。 Manages authentication, authorization, auditing, and accounting for VPN, dial-up, 802.1x wireless or Ethernet switch connection attempts that are compatible with the IETF RADIUS protocol.
60464Internet Authentication Service Internet Authentication Service
61464尚未定义描述。 Description not yet defined
65446指定用户连接的加密类型。 Specifies the encryption type for the user connection.

EXIF

File Name:iassdo.dll.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-n..ce_iassdo.resources_31bf3856ad364e35_10.0.15063.0_zh-cn_59306e3c58dc75c0\
File Size:19 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:18944
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Dynamic link library
File Subtype:0
Language Code:Chinese (Simplified)
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:NPS SDO 组件
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:IASSDO.DLL
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:IASSDO.DLL.MUI
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Directory:%WINDIR%\WinSxS\x86_microsoft-windows-n..ce_iassdo.resources_31bf3856ad364e35_10.0.15063.0_zh-cn_fd11d2b8a07f048a\

What is iassdo.dll.mui?

iassdo.dll.mui is Multilingual User Interface resource file that contain Chinese (Simplified) language for file iassdo.dll (NPS SDO 组件).

File version info

File Description:NPS SDO 组件
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:IASSDO.DLL
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:IASSDO.DLL.MUI
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x804, 1200