| 100 | IMAPIv2 |
IMAPIv2 |
| 0x00AA0004 | The requested write speed was not supported by the drive and the speed was adjusted. |
The requested write speed was not supported by the drive and the speed was adjusted. |
| 0x00AA0005 | The requested rotation type was not supported by the drive and the rotation type was adjusted. |
The requested rotation type was not supported by the drive and the rotation type was adjusted. |
| 0x00AA0006 | The requested write speed and rotation type were not supported by the drive and they were both adjusted. |
The requested write speed and rotation type were not supported by the drive and they were both adjusted. |
| 0x00AA0200 | The device accepted the command, but returned sense data, indicating an error. |
The device accepted the command, but returned sense data, indicating an error. |
| 0x00AA0302 | There is no write operation currently in progress. |
There is no write operation currently in progress. |
| 0x00AA0A08 | The specified LBA offset is already in the list of track indexes. |
The specified LBA offset is already in the list of track indexes. |
| 0x80AA0900 | The format is currently using the disc recorder for an erase operation.Please wait for the erase to complete before attempting to set or clear thecurrent disc recorder. |
The format is currently using the disc recorder for an erase operation.Please wait for the erase to complete before attempting to set or clear thecurrent disc recorder. |
| 0x80AA0901 | The erase format only supports one recorder. You must clear the currentrecorder before setting a new one. |
The erase format only supports one recorder. You must clear the currentrecorder before setting a new one. |
| 0x80AA0902 | The drive did not report sufficient data for a READ DISC INFORMATION command.The drive may not be supported, or the media may not be correct. |
The drive did not report sufficient data for a READ DISC INFORMATION command.The drive may not be supported, or the media may not be correct. |
| 0x80AA0903 | The drive did not report sufficient data for a MODE SENSE (page 0x2A) command.The drive may not be supported, or the media may not be correct. |
The drive did not report sufficient data for a MODE SENSE (page 0x2A) command.The drive may not be supported, or the media may not be correct. |
| 0x80AA0904 | The drive reported that the media is not erasable. |
The drive reported that the media is not erasable. |
| 0x80AA0905 | The drive failed the erase command. |
The drive failed the erase command. |
| 0x80AA0906 | The drive did not complete the erase in one hour. The drive may require a power cycle, media removal, or other manual intervention to resume proper operation. |
The drive did not complete the erase in one hour. The drive may require a power cycle, media removal, or other manual intervention to resume proper operation. |
| 0x80AA0907 | The drive returned an unexpected error during the erase. The the media may beunusable, the erase may be complete, or the drive may still be in the processof erasing the disc. |
The drive returned an unexpected error during the erase. The the media may beunusable, the erase may be complete, or the drive may still be in the processof erasing the disc. |
| 0x80AA0908 | The drive returned an error for a START UNIT (spinup) command. Manual intervention may be required. |
The drive returned an error for a START UNIT (spinup) command. Manual intervention may be required. |
| 0x80AA0A00 | The image has become read-only from a call to CreateResultImage(). The object can no longer be modified. |
The image has become read-only from a call to CreateResultImage(). The object can no longer be modified. |
| 0x80AA0A01 | No more tracks may be added, as CD media is restricted to track numbers between 1 and 99. |
No more tracks may be added, as CD media is restricted to track numbers between 1 and 99. |
| 0x80AA0A02 | The requested sector type is not supported. |
The requested sector type is not supported. |
| 0x80AA0A03 | Tracks must be added to the image before using this function. |
Tracks must be added to the image before using this function. |
| 0x80AA0A04 | Tracks may not be added to the image prior to the use of this function. |
Tracks may not be added to the image prior to the use of this function. |
| 0x80AA0A05 | Adding the track would result in exceeding the limit for the start of the leadout. |
Adding the track would result in exceeding the limit for the start of the leadout. |
| 0x80AA0A06 | Adding the track index would result in exceeding the 99 index limit. |
Adding the track index would result in exceeding the 99 index limit. |
| 0x80AA0A07 | The specified LBA offset is not in the list of track indexes. |
The specified LBA offset is not in the list of track indexes. |
| 0x80AA0A09 | Index 1 (LBA offset zero) may not be cleared. |
Index 1 (LBA offset zero) may not be cleared. |
| 0x80AA0A0A | Each index must have a minimum size of ten sectors. |
Each index must have a minimum size of ten sectors. |
| 0xC0AA0002 | The request was cancelled. |
The request was cancelled. |
| 0xC0AA0003 | The request requires a current disc recorder to be selected. |
The request requires a current disc recorder to be selected. |
| 0xC0AA0007 | The disc did not pass burn verification and may contain corrupt data or be unusable. |
The disc did not pass burn verification and may contain corrupt data or be unusable. |
| 0xC0AA0201 | The device reported that the requested mode page (and type) is not present. |
The device reported that the requested mode page (and type) is not present. |
| 0xC0AA0202 | There is no media in the device. |
There is no media in the device. |
| 0xC0AA0203 | The media is not compatible or of unknown physical format. |
The media is not compatible or of unknown physical format. |
| 0xC0AA0204 | The media is inserted upside down. |
The media is inserted upside down. |
| 0xC0AA0205 | The drive reported that it is in the process of becoming ready. Please try the request again later. |
The drive reported that it is in the process of becoming ready. Please try the request again later. |
| 0xC0AA0206 | The media is currently being formatted. Please wait for the format to complete before attempting to use the media. |
The media is currently being formatted. Please wait for the format to complete before attempting to use the media. |
| 0xC0AA0207 | The drive reported that it is performing a long-running operation, such as finishing a write. The drive may be unusable for a long period of time. |
The drive reported that it is performing a long-running operation, such as finishing a write. The drive may be unusable for a long period of time. |
| 0xC0AA0208 | The drive reported that the combination of parameters provided in the mode page for a MODE SELECT command were not supported. |
The drive reported that the combination of parameters provided in the mode page for a MODE SELECT command were not supported. |
| 0xC0AA0209 | The drive reported that the media is write protected. |
The drive reported that the media is write protected. |
| 0xC0AA020A | The feature page requested is not supported by the device. |
The feature page requested is not supported by the device. |
| 0xC0AA020B | The feature page requested is supported, but is not marked as current. |
The feature page requested is supported, but is not marked as current. |
| 0xC0AA020C | The drive does not support the GET CONFIGURATION command. |
The drive does not support the GET CONFIGURATION command. |
| 0xC0AA020D | The device failed to accept the command within the timeout period. This may be caused by the device having entered an inconsistent state, or the timeout value for the command may need to be increased. |
The device failed to accept the command within the timeout period. This may be caused by the device having entered an inconsistent state, or the timeout value for the command may need to be increased. |
| 0xC0AA020E | The DVD structure is not present. This may be caused by incompatible drive/medium used. |
The DVD structure is not present. This may be caused by incompatible drive/medium used. |
| 0xC0AA020F | The media's speed is incompatible with the device. This may be caused by using higher or lower speed media than the range of speeds supported by the device. |
The media's speed is incompatible with the device. This may be caused by using higher or lower speed media than the range of speeds supported by the device. |
| 0xC0AA0210 | The device associated with this recorder during the last operation has been exclusively locked, causing this operation to failed. |
The device associated with this recorder during the last operation has been exclusively locked, causing this operation to failed. |
| 0xC0AA0211 | The client name is not valid. |
The client name is not valid. |
| 0xC0AA0212 | The media is not formatted. Please format the media before attempting to use it. |
The media is not formatted. Please format the media before attempting to use it. |
| 0xC0AA02FF | The device reported unexpected or invalid data for a command. |
The device reported unexpected or invalid data for a command. |
| 0xC0AA0300 | The write failed because the drive did not receive data quickly enough to continue writing. Moving the source data to the local computer, reducing the write speed, or enabling a \"buffer underrun free\" setting may resolve this issue. |
The write failed because the drive did not receive data quickly enough to continue writing. Moving the source data to the local computer, reducing the write speed, or enabling a \"buffer underrun free\" setting may resolve this issue. |
| 0xC0AA0301 | The write failed because the drive returned error information that could not be recovered from. |
The write failed because the drive returned error information that could not be recovered from. |
| 0xC0AA0400 | There is currently a write operation in progress. |
There is currently a write operation in progress. |
| 0xC0AA0402 | The requested operation is only valid with supported media. |
The requested operation is only valid with supported media. |
| 0xC0AA0403 | The provided stream to write is not supported. |
The provided stream to write is not supported. |
| 0xC0AA0404 | The provided stream to write is too large for the currently inserted media. |
The provided stream to write is too large for the currently inserted media. |
| 0xC0AA0405 | Overwriting non-blank media is not allowed without the ForceOverwrite property set to VARIANT_TRUE. |
Overwriting non-blank media is not allowed without the ForceOverwrite property set to VARIANT_TRUE. |
| 0xC0AA0406 | The current media type is unsupported. |
The current media type is unsupported. |
| 0xC0AA0407 | This device does not support the operations required by this disc format. |
This device does not support the operations required by this disc format. |
| 0xC0AA0502 | The requested operation is only valid when media has been \"prepared\". |
The requested operation is only valid when media has been \"prepared\". |
| 0xC0AA0503 | The requested operation is not valid when media has been \"prepared\" but not released. |
The requested operation is not valid when media has been \"prepared\" but not released. |
| 0xC0AA0504 | The property cannot be changed once the media has been written to. |
The property cannot be changed once the media has been written to. |
| 0xC0AA0505 | The table of contents cannot be retrieved from an empty disc. |
The table of contents cannot be retrieved from an empty disc. |
| 0xC0AA0506 | Only blank CD-R/RW media is supported. |
Only blank CD-R/RW media is supported. |
| 0xC0AA0508 | CD-R and CD-RW media support a maximum of 99 audio tracks. |
CD-R and CD-RW media support a maximum of 99 audio tracks. |
| 0xC0AA0509 | There is not enough space left on the media to add the provided audio track. |
There is not enough space left on the media to add the provided audio track. |
| 0xC0AA050A | You cannot prepare the media until you choose a recorder to use. |
You cannot prepare the media until you choose a recorder to use. |
| 0xC0AA050B | The ISRC provided is not valid. |
The ISRC provided is not valid. |
| 0xC0AA050C | The Media Catalog Number provided is not valid. |
The Media Catalog Number provided is not valid. |
| 0xC0AA050D | The provided audio stream is not valid. |
The provided audio stream is not valid. |
| 0xC0AA0609 | There is not enough space on the media to add the provided session. |
There is not enough space on the media to add the provided session. |
| 0xC0AA060E | The requested data block type is not supported by the current device. |
The requested data block type is not supported by the current device. |
| 0xC0AA060F | The stream does not contain a sufficient number of sectors in the leadin for the current media. |
The stream does not contain a sufficient number of sectors in the leadin for the current media. |