| 100 | - Sample string (used for unit tests only). |
- Sample string (used for unit tests only). |
| 501 | Windows Server-opgraderinger anbefales ikke. Du får de bedste resultater ved at lave en ren installation af Windows Server 2016. Hvis du skal opgradere, skal du sikre dig, at dine programleverandører understøtter deres programmer på Windows Server 2016, før du går i gang. Følg deres specifikke anbefalinger før og efter opgraderingen. Få flere oplysninger på http://go.microsoft.com/fwlink/?LinkId=243105. Vigtigt! Hvis softwaren ikke er kompatibel med Windows Server 2016, eller hvis appleverandøren ikke understøtter programmet, skal du fjerne det, før du installerer Windows. Hvis du ikke fjerner programmerne, bliver dit system ikke understøttet, programmet virker muligvis ikke, og indstillinger eller andre oplysninger kan gå tabt. |
Windows Server upgrades are not recommended, for best results please clean install Windows Server 2016. If you must upgrade, before continuing make sure your app vendors support their applications on Windows Server 2016. Follow their specific recommendations before and after upgrade. For more information, go to http://go.microsoft.com/fwlink/?LinkId=243105. Important: If the software isn't compatible with Windows Server 2016 or if the app vendor doesn't support the app, uninstall it before you install Windows. If you don't uninstall the applications, your system won't be supported, the app might not work, and settings or other information might be lost. |
| 1001 | Installationsprogrammet har bestemt, at de diskenheder, der indeholder Active Directory-databasen (NTDS.DIT) eller logfiler, ikke har tilstrækkelig diskplads. Se http://go.microsoft.com/fwlink/?LinkId=141481. |
SETUP has determined that the volume(s) hosting the Active Directory database (NTDS.DIT) or log files lack sufficient disk space. See http://go.microsoft.com/fwlink/?LinkId=141481. |
| 1002 | Installationsprogrammet kan ikke bestemme, om der er tilstrækkelig diskplads til opgradering af domænecontrolleren. Se http://go.microsoft.com/fwlink/?LinkId=141481. |
SETUP cannot determine if there is sufficient disk space for the domain controller upgrade. See http://go.microsoft.com/fwlink/?LinkId=141481. |
| 1003 | SETUP kan ikke bestemme, om der er opdateringer til Windows Server 2016 ADPREP /FORESTPREP og /DOMAINPREP på denne domænecontroller. Se http://go.microsoft.com/fwlink/?LinkId=141481. |
SETUP cannot determine if Windows Server 2016 ADPREP /FORESTPREP and /DOMAINPREP updates exist on this domain controller. See http://go.microsoft.com/fwlink/?LinkId=141481. |
| 1004 | Active Directory på denne domænecontroller indeholder ikke Windows Server 2016 ADPREP /FORESTPREP-opdateringer. Se http://go.microsoft.com/fwlink/?LinkId=113955. |
Active Directory on this domain controller does not contain Windows Server 2016 ADPREP /FORESTPREP updates. See http://go.microsoft.com/fwlink/?LinkId=113955. |
| 1005 | Active Directory på denne domænecontroller indeholder ikke Windows Server 2016 ADPREP /DOMAINPREP-opdateringer. Se http://go.microsoft.com/fwlink/?LinkId=113955. |
Active Directory on this domain controller does not contain Windows Server 2016 ADPREP /DOMAINPREP updates. See http://go.microsoft.com/fwlink/?LinkId=113955. |
| 2001 | Installationsprogrammer har registreret, at BitLocker-drevkryptering er aktiveret på denne harddisk. Stop BitLocker midlertidigt (kaldes også at deaktivere) i Kontrolpanel, og genstart installationen. |
Setup has detected that BitLocker Drive Encryption is enabled on this hard disk space. Please suspend (also referred to as disable) BitLocker in the Control Panel, and then restart the installation. |
| 2002 | Installationsprogrammet kunne ikke bestemme, om BitLocker-drevkryptering er i brug. |
Setup was unable to determine if BitLocker Drive Encryption is in use. |
| 3001 | Installationsprogrammet har registreret, at Fjerninstallationstjenester er konfigureret på serveren, eller at Windows Installationstjenester er i ældre/blandet tilstand. Hvis du vil opgradere serveren, skal du fjerne denne komponent eller konfigurere Windows Installationstjenester til at køre i oprindelig tilstand. |
Setup has detected that Remote Installation Services is configured on your server, or Windows Deployment Services is in legacy/mixed mode. To upgrade your server, uninstall this component, or configure Windows Deployment Services to run in native mode. |
| 4002 | Installationsprogrammet har registreret, at Microsoft Windows Rights Management Services (RMS) version 1.0 eller 1.0 med SP1 er installeret på computeren. Du skal enten opgradere til RMS 1.0 med SP2 (anbefales) eller fjerne RMS helt. |
Setup has detected that Microsoft Windows Rights Management Services (RMS) version 1.0 or 1.0 with SP1 is installed on this computer. You must either upgrade to RMS 1.0 with SP2 (recommended) or uninstall RMS completely. |
| 4003 | Installationsprogrammet har opdaget, at Active Directory Rights Management Services (ADRMS) er konfigureret på denne computer via den interne Windows-database (WID). Før du kan fuldføre opgraderingsprocessen, skal du først fjerne ADRMS-serverrollen og overføre den eksisterende WID-forekomst til en SQL Server-forekomst. Du kan finde flere oplysninger på http://go.microsoft.com/fwlink/?LinkID=229299. |
Setup has detected that Active Directory Rights Management Services (ADRMS) is configured on this computer using Windows Internal Database (WID). To complete the upgrade process, you must first uninstall the ADRMS server role and migrate the existing WID instance to a SQL Server instance. For more information, see http://go.microsoft.com/fwlink/?LinkID=229299. |
| 5001 | Installationsprogrammet har registreret, at FrontPage Server Extensions er installeret på computeren. Hvis du vil opgradere serveren, skal du fjerne komponenten. |
Setup has detected that FrontPage Server Extensions is installed on this computer. To upgrade your server, uninstall this component. |
| 6001 | Installationsprogrammet har registreret, at Active Directory Migration Tool (ADMT) version 3.0 er installeret på computeren. Du skal fjerne ADMT version 3.0 helt, inden du kan opgradere computeren. |
Setup has detected that Active Directory Migration Tool (ADMT) version 3.0 is installed on this computer. You must uninstall ADMT version 3.0 completely before you can upgrade this computer. |
| 7001 | Installationsprogrammet har registreret, at UDDI Services version 2.0 er installeret på computeren. Hvis du vil opgradere processen, skal du først fjerne serverrollen UDDI Services. Se UDDI Services (http://go.microsoft.com/fwlink/?LinkID=109398) for at få flere oplysninger. |
Setup detected that UDDI Services version 2.0 is installed on this computer. To complete the upgrade process, you must first uninstall the UDDI Services server role. See UDDI Services (http://go.microsoft.com/fwlink/?LinkID=109398) for more information. |
| 8001 | Installationsprogrammet har registreret, at delt konfiguration i IIS er aktiveret. Du skal deaktivere delt konfiguration for at opgradere fra Windows Server 2008 til Windows Server 2008 R2. Du kan få oplysninger om at deaktivere delt konfiguration, fuldføre opgraderingen og genaktivere delt konfiguration i artiklen (http://go.microsoft.com/fwlink/?LinkId=130887). |
Setup has determined that IIS shared configuration is enabled. You must disable shared configuration to upgrade from Windows Server 2008 to Windows Server 2008 R2. For information about how to disable shared configuration, complete the upgrade, and re-enable shared configuration, see article (http://go.microsoft.com/fwlink/?LinkId=130887). |
| 8002 | FRS (File Replication Service) er konfigureret til at replikere en eller flere mapper på serveren. Replikeringen af mapperne medfører fejl, efter at serveren er opgraderet til Windows Server 2008 R2. FRS kan ikke replikere andre mapper end den delte mappe SYSVOL (diskenhed for domænesystem) i Windows Server 2008 R2. Hvis du vil fortsætte med at replikere andre mapper end mappen SYSVOL, skal du erstatte FRS-replikeringssættene med nye replikeringsgrupper ved hjælp af DFS-replikering på alle de servere, der deltager i de påvirkede replikeringssæt. |
The File Replication Service (FRS) is set to replicate one or more folders on this server. The replication of these folders will fail after this server is upgraded to Windows Server 2008 R2. FRS cannot replicate any folders other than the SYSVOL (Domain System Volume) shared folder in Windows Server 2008 R2. To continue replicating folders other than the SYSVOL folder, replace the FRS replica sets with new replication groups using DFS Replication on all servers that are participating in the affected replica sets. |
| 8003 | Installationen kunne ikke registrere, om FRS (File Replication Service) er konfigureret til at replikere mapper på serveren. FRS kan ikke replikere andre mapper end den delte mappe SYSVOL (diskenhed for domænesystem) i Windows Server 2008 R2. Hvis du vil fortsætte med at replikere andre mapper end mappen SYSVOL, skal du erstatte FRS-replikeringssættene med nye replikeringsgrupper ved hjælp af DFS-replikering på alle de servere, der deltager i de påvirkede replikeringssæt. |
Setup failed to detect whether the File Replication Service (FRS) is set to replicate folders on this server. FRS cannot replicate any folders other than the SYSVOL (Domain System Volume) shared folder in Windows Server 2008 R2. To continue replicating folders other than the SYSVOL folder, replace the FRS replica sets with new replication groups using DFS Replication on all servers that are participating in the affected replica sets. |
| 9001 | Installationsprogrammet stødte på et problem og kunne ikke fastslå, om Hyper-V-funktioner kan opgraderes. Du kan finde flere oplysninger om krav til opgradering af Hyper-V under http://go.microsoft.com/fwlink/?LinkId=512570. |
Setup encountered a problem and was unable to determine whether Hyper-V features can be upgraded. For more information about Hyper-V upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=512570. |
| 9002 | Installationsprogrammet har registreret, at der i øjeblikket kører en eller flere virtuelle computere. Luk alle virtuelle computere, og genstart derefter installationen. |
Setup has detected one or more running virtual machines. Please shut down all virtual machines, and then restart the installation. |
| 9003 | Installationsprogrammet har registreret en eller flere virtuelle computere med en gemt tilstand. Luk alle virtuelle computere, og genstart derefter installationen. |
Setup has detected one or more virtual machines with a saved state. Please shut down all virtual machines, and then restart the installation. |
| 9004 | Installationsprogrammet har registreret, at en eller flere computere har øjebliksbilleder. Når opgraderingen er fuldført, og du anvender et øjebliksbillede, der blev taget, mens den virtuelle computer kørte før opgraderingen, skal du slette den tilknyttede gemte tilstandsfil for at starte den virtuelle computer. |
Setup has detected one or more virtual machines that have snapshots. After upgrade, if you apply a snapshot that was taken while the virtual machine was running before the upgrade, you must delete the associated saved state to start the virtual machine. |
| 9005 | Installationsprogrammet har registreret, at et eller flere virtuelle drev er direkte knyttet til fysiske enheder. Det kan være nødvendigt at genoprette forbindelsen mellem de virtuelle drev og disse enheder, når opgraderingen er fuldført. |
Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. |
| 9006 | Installationsprogrammet har registreret, at et eller flere virtuelle drev er direkte knyttet til fysiske enheder. Det kan være nødvendigt at genoprette forbindelsen mellem de virtuelle drev og disse enheder, når opgraderingen er fuldført. Installationsprogrammet har registreret, at en eller flere computere har øjebliksbilleder. Når opgraderingen er fuldført, og du anvender et øjebliksbillede, der blev taget, mens den virtuelle computer kørte før opgraderingen, skal du slette den tilknyttede gemte tilstandsfil for at starte den virtuelle computer. |
Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. Setup has detected one or more virtual machines that have snapshots. After upgrade, if you apply a snapshot that was taken while the virtual machine was running before the upgrade, you must delete the associated saved state file to start the virtual machine. |
| 9008 | Installationsprogrammet har registreret en eller flere virtuelle maskiner, som er en del af en replikeringsrelation. For at undgå replikeringsfejl skal du opgradere replikaserveren, før du opgraderer den primære server. Når replikaserveren er opgraderet, allokeres alle ikke-allokerede failoverhandlinger, virtuelle maskiner til testfailover slettes, og gendannelsesoversigten for de virtuelle replikamaskiner slettes. |
Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. |
| 9009 | Installationsprogrammet har registreret en eller flere virtuelle maskiner, som er en del af en replikeringsrelation. For at undgå replikeringsfejl skal du opgradere replikaserveren, før du opgraderer den primære server. Når replikaserveren er opgraderet, allokeres alle ikke-allokerede failoverhandlinger, virtuelle maskiner til testfailover slettes, og gendannelsesoversigten for de virtuelle replikamaskiner slettes. Installationsprogrammet har registreret, at et eller flere virtuelle drev er direkte sluttet til fysiske enheder. Det kan være nødvendigt at slutte de virtuelle drev til disse enheder igen, når opgraderingen er fuldført. |
Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. |
| 9010 | Installationsprogrammet har registreret en eller flere virtuelle maskiner i en gemt tilstand med et eller flere virtuelle drev, der er knyttet til fysiske enheder. Luk de virtuelle maskiner, og genstart installationen. Det kan være nødvendigt at genoprette forbindelsen mellem de virtuelle drev og de fysiske enheder, når opgraderingen er fuldført. |
Setup has detected one or more virtual machines in a saved state with one or more virtual drives directly attached to physical devices. Please shut down these virtual machines, and then restart the installation. You might need to reconnect the virtual drives to the physical devices after the upgrade is complete. |
| 9011 | Installationsprogrammet har registreret en eller flere virtuelle maskiner, som er en del af en replikeringsrelation. For at undgå replikeringsfejl skal du opgradere replikaserveren, før du opgraderer den primære server. Når replikaserveren er opgraderet, allokeres alle ikke-allokerede failoverhandlinger, virtuelle maskiner til testfailover slettes, og gendannelsesoversigten for de virtuelle replikamaskiner slettes. Installationsprogrammet har registreret en eller flere virtuelle maskiner i en gemt tilstand med et eller flere virtuelle drev direkte sluttet til fysiske enheder. Luk disse virtuelle maskiner, og genstart derefter installationen. Det kan være nødvendigt at slutte de virtuelle drev til de fysiske enheder igen, når opgraderingen er fuldført. |
Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. Setup has detected one or more virtual machines in a saved state with one or more virtual drives directly attached to physical devices. Please shut down these virtual machines, and then restart the installation. You might need to reconnect the virtual drives to the physical devices after the upgrade is complete. |
| 9012 | Installationsprogrammet har registreret, at processorerne i denne computer ikke understøtter adresseoversættelse på andet niveau (SLAT). Hyper-V på Windows Server 2016 kræver denne funktion. |
Setup has detected that the processors in this machine do not support second level address translation (SLAT). Hyper-V on Windows Server 2016 requires this capability. |
| 10001 | Der opstod et problem under installationen, og det kan ikke fastslås, om funktionen Failover Clustering kan opgraderes. Du kan finde flere oplysninger ved at besøge http://go.microsoft.com/fwlink/?LinkId=179355. |
Setup encountered a problem and was unable to determine whether the Failover Clustering feature can be upgraded. For more information visit http://go.microsoft.com/fwlink/?LinkId=179355. |
| 10002 | Installationsprogrammet har registreret, at denne computer er medlem af en failover-klynge, som ikke kan opgraderes direkte. For at fuldføre denne handling anbefales det, at du fjerner denne node fra failover-klyngen og udfører en ren installation. Du kan finde flere oplysninger på http://go.microsoft.com/fwlink/?LinkID=178962. |
Setup has determined that this computer is a member of a Failover Cluster which cannot directly upgraded. In order to complete this operation it is recommended that you evict this node from the Failover Cluster and perform a clean installation. See http://go.microsoft.com/fwlink/?LinkID=178962 for more information. |
| 11002 | AD FS (Active Directory Federation Services) 2.0 blev registreret på denne computer og bliver ikke opgraderet. Efter opgraderingen vil AD FS være installeret, men det er nødvendigt at ændre konfigurationen for at fortsætte med at bruge tjenesten. Det anbefales, at du opretter en sikkerhedskopi af dine AD FS-konfigurationsdata, før du fortsætter med denne opgradering. Du kan finde alle oplysninger om, hvordan du opgraderer installationen af AD FS 2.0, i KB-artiklen på http://go.microsoft.com/fwlink/?LinkId=218228. |
Active Directory Federation Services (AD FS) 2.0 was detected on this machine and will not be upgraded. After upgrade, AD FS will be installed, but will need to be reconfigured in order to continue operation. It is recommended that you back up your AD FS configuration data before proceeding with this upgrade. For full details on steps to take to upgrade your installation of AD FS 2.0, please refer to KB article at http://go.microsoft.com/fwlink/?LinkId=218228. |
| 11003 | Rolletjenesten AD FS (Active Directory Federation Services) er installeret på denne server. Når opgraderingen af operativsystemet er fuldført, skal du geninstallere rolletjenesten og derefter konfigurere den sammensluttede tjeneste igen ved at føje noden til en eksisterende Windows Server 2012 R2- eller nyere AD FS-farm. Du kan finde flere oplysninger i http://go.microsoft.com/fwlink/?LinkID=518375. |
The Active Directory Federation Services (AD FS) role service is installed on this server. When the OS upgrade is complete, you will need to reinstall the role service and then reconfigure the federation service by adding the node to an existing Windows Server 2012 R2 or later AD FS farm. For more information see http://go.microsoft.com/fwlink/?LinkID=518375. |
| 11004 | Proxyrolletjenesten AD FS (Active Directory Federation Services) er installeret på denne server. Når opgraderingen af operativsystemet er fuldført, skal du installere rolletjenesten Web Application Proxy på fjernadgangsrollen og derefter føje den til en Windows Server 2012 R2- eller nyere AD FS-farm. Du kan finde flere oplysninger i http://go.microsoft.com/fwlink/?LinkID=518376 |
The Active Directory Federation Services (AD FS) proxy role service is installed on this server. When the OS upgrade is complete, you will need to install the Web Application Proxy role service on the Remote Access role and then add it to a Windows Server 2012 R2 or later AD FS farm. For more information see http://go.microsoft.com/fwlink/?LinkID=518376 |
| 12001 | Installationsprogrammet har registreret, at der er installeret en tidligere version af iSCSI Target Server eller iSCSI VSS/VDS-lagerudbydere på denne computer. De vil ikke længere fungere efter opgraderingen, og alle konfigurationsindstillingerne vil gå tabt. Følg vejledningen på http://go.microsoft.com/fwlink/?LinkId=286173 inden opgraderingen for at sikre, at de fortsat fungerer. |
Setup has detected that a previous version of the iSCSI Target Server or iSCSI VSS/VDS storage providers are installed on this computer. They will no longer function after upgrading and all configuration settings will be lost. Follow the instructions at http://go.microsoft.com/fwlink/?LinkId=286173 prior to upgrading to ensure they will continue to function. |
| 12002 | På grund af uventede systemfejl kunne installationsprogrammet ikke afgøre, om denne opgradering er kompatibel med iSCSI Target Server eller dens administrationskomponenter. Annuller installationen, og prøv igen. |
Due to unexpected errors, Setup was unable to determine if this upgrade is compatible with the iSCSI Target Server or its management components. Cancel Setup and retry. |
| 12003 | Installationsprogrammet har registreret, at der er installeret iSCSI Target Server SMI-S Provider til System Center Virtual Machine Manager 2012 SP1 på denne computer. Denne SMI-S-udbyder vil ikke længere fungere efter opgraderingen, og alle konfigurationsindstillingerne vil gå tabt. Følg vejledningen på http://go.microsoft.com/fwlink/?LinkId=286173 inden opgraderingen for at sikre, at SMI-S-administrationen i iSCSI Target Server fortsat vil fungere. |
Setup has detected that the iSCSI Target Server SMI-S Provider for System Center Virtual Machine Manager 2012 SP1 is installed on this computer. This SMI-S provider will no longer function after upgrading and all configuration settings will be lost. Follow the instructions at http://go.microsoft.com/fwlink/?LinkId=286173 prior to upgrading to ensure the iSCSI Target Server SMI-S management will continue to function. |
| 13001 | Installationsprogrammet har registreret, at mindst én af rollerne RDSH (Remote Desktop Session Host), RDCB (Remote Desktop Connection Broker), RDVH (Remote Desktop Virtualization Host) og RDWA (Remote Desktop Web Access) er installeret. Fjern installationen af disse komponenter for at opgradere serveren. |
Setup has detected that at least one of Remote Desktop Session Host (RDSH), Remote Desktop Connection Broker (RDCB), Remote Desktop Virtualization Host (RDVH) and Remote Desktop Web Access (RDWA) role is installed. To upgrade your server, uninstall these components. |
| 13002 | Installationsprogrammet har registreret, at Telnet Server-rollen er installeret. For at kunne opgradere systemet skal du fjerne Telnet Server-rollen. |
Setup has detected that the Telnet Server role is installed. To upgrade your system, uninstall the Telnet Server role. |
| 13003 | Installationsprogrammet har registreret, at en eller flere af komponenterne til Identitetsstyring til UNIX er installeret. For at kunne opgradere serveren skal du fjerne disse komponenter. Der er flere oplysninger om, hvordan du fjerner komponenterne, i http://go.microsoft.com/fwlink/?LinkId=518378. |
Setup has detected that one or more of the Identity Management for UNIX components are installed. To upgrade your server, uninstall these components. For more information about uninstalling these components, see http://go.microsoft.com/fwlink/?LinkId=518378. |
| 13004 | Omdirigering af Plug and Play- og RemoteFX USB-enheder er som standard deaktiveret i denne version af Windows. Du kan aktivere indstillingen igen i Gruppepolitik. |
Plug and Play and RemoteFX USB device redirection is disabled by default in this version of Windows. You can re-enable this setting in Group Policy. |
| 13005 | Installationsprogrammet har fundet flere forbindelsesmæglere for Fjernskrivebord i installationen af Fjernskrivebord-tjenester. Opgradering kan kun udføres i en konfiguration med en enkelt mægler for at sikre konsistens af mæglerdatabasen. Hvis du vil fortsætte med opgraderingen, skal du fjerne alle andre forbindelsesmæglere for Fjernskrivebord fra HA-mæglerkonfigurationen og prøve igen. |
Setup has detected multiple RD Connection Brokers in the Remote Desktop Services deployment. Upgrade can only be performed in a single-broker configuration to ensure broker database consistency. To continue with the upgrade remove all other RD Connection Brokers from the HA Broker configuration and try again. |
| 14001 | Installationsprogrammet har registreret, at NPS-konfiguration indeholder indstillinger, der er relateret til Network Access Protection (NAP). Disse indstillinger skal fjernes fra konfigurationen, før du opgraderer til denne version af Windows. Der er gemt en liste over indstillinger, der skal fjernes, på skrivebordet i filen NAP_settings.html. Du kan finde flere oplysninger om kravene til opgradering under http://go.microsoft.com/fwlink/?LinkId=392909. |
Setup has detected that the NPS configuration contains Network Access Protection (NAP) related settings. These settings must be removed from the configuration before upgrading to this version of Windows. A list of settings that need to be removed has been saved on the desktop to the file: NAP_settings.html. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
| 14002 | Der opstod en fejl under installationen, da det skulle afgøres, om der findes indstillinger for Network Access Protection (NAP) i NPS-konfiguration. Kontrollér, at alle NAP-relaterede indstillinger er blevet fjernet fra konfigurationen, før du udfører en opgradering. Der er flere oplysninger under http://go.microsoft.com/fwlink/?LinkId=392909. |
An error occurred during setup while determining if Network Access Protection (NAP) settings are present in the NPS configuration. Please verify that all NAP related settings have been removed from the configuration prior to performing an upgrade. For more information, see http://go.microsoft.com/fwlink/?LinkId=392909. |
| 14003 | Installationsprogrammet har registreret, at HRA-rolletjenesten er installeret. Rolletjenesten skal fjernes, før du opgraderer til denne version af Windows. Du kan finde flere oplysninger om kravene til opgradering under http://go.microsoft.com/fwlink/?LinkId=392909. |
Setup has detected that the HRA role service is installed. This role service must be removed before upgrading to this version of Windows. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
| 14004 | Installationsprogrammet har registreret, at HCAP-rolletjenesten er installeret. Rolletjenesten skal fjernes, før du opgraderer til denne version af Windows. Du kan finde flere oplysninger om kravene til opgradering under http://go.microsoft.com/fwlink/?LinkId=392909. |
Setup has detected that the HCAP role service is installed. This role service must be removed before upgrading to this version of Windows. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |