| File name: | dnsclientpsprovider.dll.mui |
| Size: | 13824 byte |
| MD5: | d84007bc671b9288530e8e1b4d98347a |
| SHA1: | 2a81bf52671aa6ff494b7551469c1f1c4d8c52dd |
| SHA256: | 15c54dabeb37b87931767db3dbce5a13e84aff2c30331c410b3c7b6215f013f1 |
| Operating systems: | Windows 10 |
| Extension: | MUI |
If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.
| id | Chinese (Simplified) | English |
|---|---|---|
| 1 | 禁用 | Disable |
| 2 | EnableOnNetworkId | EnableOnNetworkId |
| 3 | EnableDA | EnableDA |
| 4 | DisableDA | DisableDA |
| 5 | 用于控制 DirectAccess 规则状态的属性。 | Property for controlling DirectAccess rules state. |
| 6 | FallbackSecure | FallbackSecure |
| 7 | FallbackUnsecure | FallbackUnsecure |
| 8 | FallbackPrivate | FallbackPrivate |
| 9 | 用于控制 DNS 客户端名称解析回退策略的属性。 | Property for controlling DNS client name resolution fallback policy. |
| 10 | QueryIPv6Only | QueryIPv6Only |
| 11 | QueryBoth | QueryBoth |
| 12 | 用于控制 DNS 客户端查询策略的属性。 | Property for controlling DNS client query policy. |
| 13 | DNS 客户端名称解析策略表全局设置 | DNS Client Name Resolution Policy Table Global Settings |
| 14 | 名称解析策略表条目的版本。 | The version for Name Resolution Policy Table entry. |
| 15 | DNS 命名空间可以是后缀/前缀/FQDN/子网/任意。要指定“任意”，值必须是 .(点) | DNS namespace which can be a Suffix/Prefix/FQDN/Subnet/Any.In order to specify Any, the value must be .(dot) |
| 16 | 唯一标识规则的名称。 | Name which uniquely identifies a rule. |
| 17 | NRPT 规则的可选友好名称。 | An optional friendly name for the NRPT rule. |
| 18 | 用于标识是否对规则启用 DNSSEC 的属性。 | Property which identifies if DNSSEC is enabled on the rule. |
| 19 | 用于对 DNS 响应启用 AD 位检查的属性。 | Property to enable AD bit check on DNS responses. |
| 20 | 用于在 IPsec 通道上为 DNSSEC 查询创建隧道的属性。 | Property to tunnel DNSSEC queries over IPsec channel. |
| 21 | 用于控制 IPsec 隧道加密设置的属性。 | Property to control IPsec tunnel encryption settings. |
| 22 | 无 | None |
| 23 | 低 | Low |
| 24 | 中 | Medium |
| 25 | 高 | High |
| 26 | 用于标识是否对规则启用 DirectAccess 的属性。 | Property which identifies if DirectAccess is enabled on the rule. |
| 27 | 用于验证 IPsec 通道的证书颁发机构。 | Certification authority to validate the IPsec channel. |
| 28 | 启用 DA 时将查询的 DNS 服务器。 | The DNS servers which will be queried when DA is enabled. |
| 29 | 用于在 IPSec 通道上为 DNS 查询创建隧道的属性。 | Property to tunnel DNS queries over IPsec channel. |
| 30 | 要在连接到 Internet 时使用的代理服务器类型。 | The proxy server type to be used when connecting to the Internet. |
| 31 | NoProxy | NoProxy |
| 32 | UseDefault | UseDefault |
| 33 | UseProxyName | UseProxyName |
| 34 | 要在连接到 Internet 时使用的代理服务器。 | The proxy server to be used when connecting to the Internet. |
| 35 | 禁用 DA 时将 DNS 查询发送到的 DNS 服务器。 | The DNS servers the DNS query is sent to when DA is disabled. |
| 36 | DNS 查询中主机名称的编码格式。 | Encoding format for host names in the DNS query. |
| 37 | Utf8WithMapping | Utf8WithMapping |
| 38 | Utf8WithoutMapping | Utf8WithoutMapping |
| 39 | Punycode | Punycode |
| 40 | 当前规则的用户友好描述。 | A user friendly description of the current rule. |
| 41 | DNS 客户端名称解析策略表条目 | DNS Client Name Resolution Policy Table Entry |
| 42 | DNS 命名空间可以是后缀/前缀/FQDN/子网。 | DNS namespace which can be a Suffix/Prefix/FQDN/Subnet. |
| 43 | 用于标识是否已启用 DirectAccess 的属性。 | Property which identifies if DirectAccess is enabled. |
| 44 | 用于验证 DNSSEC 的 IPsec 通道的证书颁发机构。 | Certification authority to validate the IPsec channel for DNSSEC. |
| 45 | 是否需要 DNSSEC 验证。 | Whether DNSSEC validation is required or not. |
| 46 | DNSSEC 查询是否需要 IPsec。 | Whether IPsec is required for DNSSEC queries. |
| 47 | DNSSEC 的 IPsec 加密级别。 | IPsec encryption level for DNSSEC. |
| 48 | 用于验证 DirectAccess 的 IPsec 通道的证书颁发机构。 | Certificattion authority to validate the IPsec channel for DirectAccess. |
| 49 | DirectAccess 是否需要 IPsec。 | Whether IPsec is required for DirectAccess. |
| 50 | DirectAccess 的 IPsec 加密级别。 | IPsec encryption level for DirectAccess. |
| 51 | 启用 DirectAccess 时将查询的 DNS 服务器。 | The DNS servers which will be queried when DirectAccess is enabled. |
| 52 | 直接 | Direct |
| 53 | 通用 DNS 服务器 | Generic DNS Servers |
| 54 | DNS 客户端策略配置 | DNS Client Policy Configuration |
| 55 | 修改全局 NRPT 设置 | Modifies Global NRPT settings |
| 56 | 控制直接访问的属性 | Property that controls Direct Access |
| 57 | GPO 的名称(如果未在域上指定默认 GPO) |
Name of GPO, if not specified the default GPO on the domain |
| 58 | 承载 GPO 的服务器 | Server hosting the GPO |
| 59 | 指定是否应显示该 cmdlet 的结果 | Specifies if result of the cmdlet should be displayed |
| 60 | Microsoft.Management.Infrastructure.CimInstance#DnsClientNrptGlobal 对象包含 DNS 客户端 NRPT 全局设置的所有属性。 | Microsoft.Management.Infrastructure.CimInstance#DnsClientNrptGlobal object contains all the properties of DNS client NRPT Global settings. |
| 61 | 检索名称解析策略表全局设置 | Retrieves Name Resolution Policy Table global settings |
| 62 | DNS 客户端 NRPT | DNS Client NRPT |
| 63 | 将规则添加到名称解析策略表 | Adds a rule to Name Resolution Policy Table |
| 64 | 启用 DirectAccess 时将查询的 DNS 服务器 |
The DNS servers which will be queried when Direct Access is enabled |
| 65 | 用于控制 DA 是否需要 IPsec 的属性 |
Property for controlling whether IPsec is required or not for DA |
| 66 | 用于控制 DA 的 IPsec 加密类型的属性 | Property for controlling IPsec encryption type for DA |
| 67 | 要在连接到 Internet 时使用的代理服务器 |
The proxy server to be used when connecting to the Internet |
| 68 | 要在连接到 Internet 时使用的代理服务器类型。 |
The proxy server type to be used when connecting to Internet. |
| 69 | 用于控制是否需要 Dnssec 验证的属性 |
Property for controlling whether Dnssec validation is required or not |
| 71 | 用于验证 IPsec 通道的证书颁发机构 |
Certification authority to validate the IPsec channel |
| 72 | 存储管理注释 | Stores admin notes |
| 73 | 名称解析策略表规则的可选友好名称 |
An optional friendly name for the Name Resolution Policy Table rule |
| 74 | 用于在 IPSec 通道上为 DNS 查询创建隧道的属性 | Property to tunnel DNS queries over IPsec channel |
| 75 | 用于控制 IPsec 隧道加密设置的属性 |
Property to control Ipsec tunnel encryption settings |
| 76 | 禁用 DA 时将 DNS 查询发送到的 DNS 服务器 |
The DNS servers the DNS query is sent to when DA is disabled |
| 77 | DNS 查询中主机名称的编码格式 |
Encoding format for host names in the DNS query |
| 78 | DNS 命名空间可以是后缀/前缀/FQDN/子网/任意。要指定“任意”，值必须是 .(点) |
DNS namespace which can be a suffix/prefix/FQDN/subnet/any. In order to specify any, the value must be .(dot) |
| 79 | Microsoft.Management.Infrastructure.CimInstance#DnsClientNrptRule 对象包含 DNS 客户端 NRPT 规则的所有属性 | Microsoft.Management.Infrastructure.CimInstance#DnsClientNrptRule Object contains all the properties of DNS client NRPT rule |
| 80 | 删除 DNS 客户端 NRPT 规则 | Removes DNS client NRPT rule |
| 81 | 要操作的 GPO 的名称 | Name of the GPO on which to operate |
| 82 | 唯一标识规则的名称 |
Name which uniquely identifies a rule |
| 83 | 包含该 GPO 的服务器的名称 | Name of the server containing the GPO |
| 84 | 指定不发出提示 | Specifies not to issue a prompt |
| 85 | 检索 DNS 客户端名称解析策略表规则 | Retrieves DNS client Name Resolution Policy Table rules |
| 86 | 唯一标识规则的名称 | Name which uniquely identifies a rule |
| 88 | 修改指定命名空间的 DNS 客户端 NRPT 规则。 | Modifies DNS client NRPT rule for given namespace. |
| 89 | 用于控制 DA 的 IPsec 加密类型的属性。 | Property for controlling IPsec encryption type for DA. |
| 90 | 启用 DirectAccess 时将查询的 DNS 服务器 | The DNS servers which will be queried when Direct Access is enabled |
| 92 | 名称解析策略表规则的可选友好名称。 | An optional friendly name for the Name Resolution Policy Table rule. |
| 93 | 用于验证 DirectAccess 的 Ipsec 通道的证书颁发机构 | Certification authority to validate the Ipsec channel for DirectAccess |
| 94 | 禁用 DA 时将 DNS 查询发送到的 DNS 服务器 | The DNS servers the DNS query is sent to when DA is disabled |
| 96 | 用于存储管理注释的属性。 | Property to store admin comments. |
| 98 | 用于控制是否需要 Dnssec 验证的属性。 | Property for controlling whether Dnssec validation is required or not. |
| 99 | GPO 的名称(如果未在域上指定默认 GPO)。 | Name of GPO, if not specified the default GPO on the domain. |
| 100 | DNS 客户端 NRPT 规则 | DNS Client NRPT Rule |
| 101 | 检索计算机上配置的名称解析策略表 | Retrieves Name Resolution Policy Table configured on the machine |
| 102 | 如果未指定此参数，则会返回 EffectiveNrptPolicy | If this parameter is specified then EffectiveNrptPolicy is returned |
| 103 | Microsoft.Management.Infrastructure.CimInstance#DnsClientPolicyConfiguration 对象包含 DNS 客户端 NRPT 策略的所有属性。如果指定了“有效”，则仅检索“有效”策略的内容。 | Microsoft.Management.Infrastructure.CimInstance#DnsClientPolicyConfiguration object contains all the properties of DNS client NRPT policy. If "Effective" is specified, only the contents of Effective policy are retrieved. |
| 104 | 计算机上配置的 Nrpt 策略的 CIM 类 | CIM class for Nrpt policy configured on machine |
| 1000 | DNS 名称解析策略表 Powershell 提供程序 | DNS Name Resolution Policy Table Powershell Provider |
| 1001 | 找不到规则 %1。 | Rule %1 was not found. |
| 1002 | 规则 %1 已损坏。 | Rule %1 is corrupt. |
| 1003 | 无法执行 PassThru 请求。 | Unable to perform PassThru request. |
| 1004 | 未指定组策略对象(GPO)名称。若要在 GPO 中配置 NRPT 设置，必须针对该域指定一个有效的 GPO 名称，或者指定要用于配置这些设置的域控制器。 | A Group Policy Object(GPO) name was not specified. In order to configure NRPT settings in the GPO, you must specify a valid GPO name for the domain and optionally the domain controller on which you want to configure the settings. |
| 1005 | 必须至少指定 EnableDAForAllNetworks、SecureNameQueryFallback 和 QueryPolicy 参数中的某一个参数，该操作才能完成。 | At least one of EnableDAForAllNetworks, SecureNameQueryFallback and QueryPolicy parameters must be specified for the operation to complete. |
| 1006 | 无法加载 NRPT 信息。如果指定了 GPOName，请验证计算机已加入域，并且域控制器上已输入 GPO。如果未指定 GPOName，请验证你具有该计算机的管理权限。 | Failed to load the NRPT information. If you have specified GPOName, verify that the machine is domain joined and the input GPO is present on the domain controller. If GPOName was not specified, verify that you have administrative privileges on the machine. |
| 1007 | 无法设置属性 %1 的值。输入值已指定: %2。 | Failed to set the value for property %1. Input value specified: %2. |
| 1009 | DAProxyServername 无效。请按 : 格式为 DAProxyServerName 提供一个值。 | Invalid DAProxyServername. Please provide a value for DAProxyServerName in the format :. |
| 1010 | 无法创建新的 NRPT 规则。 | Failed to create a new NRPT rule. |
| 1012 | 无法将配置提交到存储区。 | Failed to commit the configuration to the store. |
| 1013 | 无法更新规则的 Namespace、Comment、DisplayName 或 IPSecCARestriction 属性之一。 | Failed to update one of Namespace, Comment, DisplayName or IPSecCARestriction property for the rule. |
| 1014 | 无法更新规则的 DNSSEC 设置。 | Failed to update DNSSEC settings for the rule. |
| 1015 | 无法更新规则的 DA 设置。 | Failed to update DA settings for the rule. |
| 1016 | 无法更新规则的通用 DNS 服务器。 | Failed to update generic DNS servers for the rule. |
| 1017 | 无法更新规则的 IDN 设置。 | Failed to update IDN setting for the rule. |
| 1018 | DAProxyType 已指定为 UseProxyName，但 DAProxyServerName 参数为空。请提供一个 DAProxyServerName。 | The DAProxyType is specified as UseProxyName but DAProxyServerName parameter is empty. Please provide a DAProxyServerName. |
| 1019 | 无法更新规则的版本。 | Failed to update the version for the rule. |
| 1020 | 若要创建或编辑规则，必须至少将下列中的一项有效值指定给该 cmdlet: DnsSecEnable、DAEnable、NameServers 或 NameEncoding 参数。 | The rule creation or editing requires specifying a valid value for at least one of: DnsSecEnable, DAEnable, NameServers or NameEncoding parameters to the cmdlet. |
| 1021 | 必须将 DnsSecEnable 参数指定给该 cmdlet，才能在规则上配置 DnsSecIPsecRequired、DnsSecValidationRequired 或 DnsSecIPsecEncryptionType。 | You must specify the DnsSecEnable parameter to the cmdlet in order to configure DnsSecIPsecRequired, DnsSecValidationRequired or DnsSecIPsecEncryptionType on the rule. |
| 1022 | 必须指定 DnsSecIPsecRequired 参数，才能配置 DnsSecIPsecEncryptionType。 | You must specify the DnsSecIPsecRequired parameter inorder to configure DnsSecIPsecEncryptionType. |
| 1023 | 必须将 DAEnable 参数指定给该 cmdlet，才能在规则上配置 DANameServers、DAIPsecRequired、DAIPsecEncryptionType、DAProxyType 或 DAProxyServerName。 | You must specify the DAEnable parameter to the cmdlet in order to configure DANameServers, DAIPsecRequired, DAIPsecEncryptionType, DAProxyType or DAProxyServerName on the rule. |
| 1024 | 必须指定 DAIPsecRequired 参数，才能配置 DAIPsecEncryptionType。 | You must specify DAIPsecRequired parameter inorder to configure DAIPsecEncryptionType. |
| 1025 | DANameServers 的输入值必须包含一个或多个有效的 IPv4 和 IPv6 地址。 | The input value for DANameServers must contain one or more valid IPv4 and IPv6 addresses. |
| 1026 | NameServers 的输入值必须包含一个或多个 IPv4 和 IPv6 地址。 | The input value for NameServers must contain one or more IPv4 and IPv6 addresses. |
| 1027 | 未在规则上配置 DNSSEC。必须将值为 $true 的 DnsSecEnable 参数指定给该 cmdlet，才能在规则上配置 DnsSecIPsecRequired、DnsSecValidationRequired 或 DnsSecIPsecEncryptionType。 | DNSSEC is not configured on the rule. You must specify the DnsSecEnable parameter with a value of $true to the cmdlet in order to configure DnsSecIPsecRequired, DnsSecValidationRequired or DnsSecIPsecEncryptionType on the rule. |
| 1028 | 未在规则上配置 DnsSecIPsecRequired。必须指定值为 $true 的 DnsSecIPsecRequired 参数，才能配置 DnsSecIPsecEncryptionType。 | DnsSecIPsecRequired is not configured on the rule. You must specify the DnsSecIPsecRequired parameter with value a of $true to configure DnsSecIPsecEncryptionType. |
| 1029 | 未在规则上配置 DA。必须将值为 $true 的 DAEnable 参数指定给该 cmdlet，才能在规则上配置 DANameServers、DAIPsecRequired、DAIPsecEncryptionType、DAProxyType 或 DAProxyServerName。 | DA is not configured on the rule. You must specify the DAEnable parameter with a value of $true to the cmdlet in order to configure DANameServers, DAIPsecRequired, DAIPsecEncryptionType, DAProxyType or DAProxyServerName on the rule. |
| 1030 | 未在规则上配置 DAIPsecRequired。必须指定值为 $true 的 DAIPsecRequired 参数，才能配置 DAIPsecEncryptionType。 | DAIPsecRequired is not configured on the rule. You must specify the DAIPsecRequired parameter with a value of $true to configure DAIPsecEncryptionType. |
| 1031 | 只有在已指定参数 DAProxyType 并且值等于 UseProxyName 时，才能指定 DAProxyServerName 参数。 | DAProxyServerName parameter can be specified only when the parameter DAProxyType is specified and with value equal to UseProxyName. |
| 1032 | 由于未识别版本，无法获取规则 %1。 | Cannot get rule %1 due to unrecognized version. |
| 1033 | 由于未识别版本，无法设置规则 %1。 | Cannot set rule %1 due to unrecognized version. |
| 1034 | 由于未识别版本，无法删除规则 %1。 | Cannot remove rule %1 due to unrecognized version. |
| 1100 | 执行操作时出现内存分配错误 | Memory allocation failure when performing the operation |
| 1101 | 无法枚举规则。 | Failed to enumerate rules. |
| 1102 | 无法删除 %1 规则 | Failed to remove %1 rule |
| 1103 | 无法检索 NRPT 策略。有关详细信息，请参考扩展错误 | Failed to retrieve NRPT policy. Please refer to extended error for more details |
| 1200 | 为命名空间 %1 添加 NRPT 规则，设置如下： DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5，位于： %6 GPO 中 |
Adding NRPT rule for namespace %1 with DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5 in %6 GPO |
| 1201 | 为命名空间 %1 添加 NRPT 规则，设置如下： DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5 |
Adding NRPT rule for namespace %1 with DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5 |
| 1202 | 删除命名空间 %1 的 NRPT 规则，设置如下： DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5，位于： %6 GPO 中 |
Removing NRPT rule for namespace %1 with DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5 in %6 GPO |
| 1203 | 删除命名空间 %1 的 NRPT 规则，设置如下： DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5 |
Removing NRPT rule for namespace %1 with DAEnable: %2 DnsSecValidationRequired: %3 NameEncoding: %4 NameServers: %5 |
| 1204 | 为 %1 GPO 中的 NRPT 设置全局参数 | Setting global parameters for NRPT in %1 GPO |
| 1205 | 为 NRPT 设置全局参数 | Setting global parameters for NRPT |
| 1206 | 启用 DNSSEC | Enabling DNSSEC |
| 1207 | 禁用 DNSSEC | Disabling DNSSEC |
| 1208 | 在 %1 GPO 中启用 DNSSEC | Enabling DNSSEC in %1 GPO |
| 1209 | 在 %1 GPO 中禁用 DNSSEC | Disabling DNSSEC in %1 GPO |
| 1210 | 启用 DirectAccess | Enabling DirectAccess |
| 1211 | 禁用 DirectAccess | Disabling DirectAccess |
| 1212 | 在 %1 GPO 中启用 DirectAccess | Enabling DirectAccess in %1 GPO |
| 1213 | 在 %1 GPO 中禁用 DirectAccess | Disabling DirectAccess in %1 GPO |
| 1214 | 在 %2 GPO 中将命名空间设置为 %1 | Setting namespace to %1 in %2 GPO |
| 1215 | 将命名空间设置为 %1 | Setting namespace to %1 |
| 1216 | 在 %2 GPO 中将 NameServer 设置为 %1 | Setting NameServer to %1 in %2 GPO |
| 1217 | 将 NameServer 设置为 %1 | Setting NameServer to %1 |
| 1218 | 在 %1 GPO 中清除 NameServer | Clearing NameServer in %1 GPO |
| 1219 | 清除 NameServer | Clearing NameServer |
| 1220 | 在 %2 GPO 中将 NameEncoding 设置为 %1 | Setting NameEncoding to %1 in %2 GPO |
| 1221 | 将 NameEncoding 设置为 %1 | Setting NameEncoding to %1 |
| 1300 | 已启用 | Enabled |
| 1301 | 已禁用 | Disabled |
| 1302 | 否 | No |
| 1500 | 删除命名空间 %1 的 NRPT 规则，设置如下： DAEnable: %2， DnsSecValidationRequired: %3， NameEncoding: %4 NameServers: %5，位于： %6 GPO 中 是否要继续? |
Removing NRPT rule for namespace %1 with DAEnable: %2, DnsSecValidationRequired: %3, NameEncoding: %4 NameServers: %5 in %6 GPO Do you want to continue? |
| 1501 | 删除命名空间 %1 的 NRPT 规则，设置如下： DAEnable: %2， DnsSecValidationRequired: %3， NameEncoding: %4 NameServers: %5 是否要继续? |
Removing NRPT rule for namespace %1 with DAEnable: %2, DnsSecValidationRequired: %3, NameEncoding: %4 NameServers: %5 Do you want to continue? |
| File Description: | DNS 客户端 WMIv2 提供程序 |
| File Version: | 10.0.15063.0 (WinBuild.160101.0800) |
| Company Name: | Microsoft Corporation |
| Internal Name: | DnsClientPsProvider.dll |
| Legal Copyright: | © Microsoft Corporation. All rights reserved. |
| Original Filename: | DnsClientPsProvider.dll.mui |
| Product Name: | Microsoft® Windows® Operating System |
| Product Version: | 10.0.15063.0 |
| Translation: | 0x804, 1200 |