| 1 | Windows 时间服务 |
Windows Time Service |
| 2 | Windows Time Service |
Windows Time Service |
| 3 | Windows 时间服务性能计数器显示服务的时间同步运行时信息。请注意，只有在服务处于正在运行状态时，才能显示该信息。 |
Windows Time Service Performance Counters display the time synchronization runtime information from the service. Note that the service has to be running in order for this information to be displayed. |
| 5 | 计算出的时间偏移 |
Computed Time Offset |
| 6 | Computed Time Offset |
Computed Time Offset |
| 7 | W32Time 服务计算出的系统时钟与所选时间源之间的绝对时间偏移(以微秒为单位)。当有新的有效样本可用时，将使用该样本指示的时间偏移更新所计算出的时间。这是本地时钟的实际时间偏移。W32Time 将使用此偏移启动时钟校正，并使用需要应用到本地时钟的剩余时间偏移更新在样本之间计算出的时间。可使用低轮询间隔(例如: 256 秒或更少)通过此性能计数器跟踪时钟准确度，并期望计数器值小于所需的时钟准确度限制。 |
The absolute time offset between the system clock and the chosen time source, as computed by W32Time Service in microseconds. When a new valid sample is available, the computed time is updated with the time offset indicated by the sample. This is the actual time offset of the local clock. W32time initiates clock correction using this offset and updates the computed time in between samples with the remaining time offset that needs to be applied to the local clock. Clock accuracy can be tracked using this performance counter with a low polling interval (eg:256 seconds or less) and looking for the counter value to be smaller than the desired clock accuracy limit. |
| 9 | 时钟频率调节 |
Clock Frequency Adjustment |
| 10 | Clock Frequency Adjustment |
Clock Frequency Adjustment |
| 11 | W32Time 对本地系统时钟所做的时钟频率调整的绝对值(十亿分之几)。此计数器有助于直观地显示 W32time 所执行的操作。 |
The absolute clock frequency adjustment made to the local system clock by W32Time in parts per billion. This counter helps visualize the actions being taken by W32time. |
| 13 | NTP 往返延迟 |
NTP Roundtrip Delay |
| 14 | NTP Roundtrip Delay |
NTP Roundtrip Delay |
| 15 | NTP 客户端在接收来自服务器的响应时所经历的最近往返延迟(以微秒为单位)。这是 NTP 客户端在将请求传输到 NTP 服务器和接收来自该服务器的有效响应之间经过的时间。此计数器可帮助确定 NTP 客户端所经历的延迟的特征。往返次数过多或发生变化会干扰 NTP 时间计算，从而影响通过 NTP 进行的时间同步的准确性。 |
Most recent roundtrip delay experienced by the NTP Client in receiving a response from the server in microseconds. This is the time elapsed on the NTP client between transmitting a request to the NTP server and receiving a valid response from the server. This counter helps characterize the delays experienced by the NTP client. Larger or varying roundtrips can add noise to NTP time computations, which in turn may affect the accuracy of time synchronization through NTP. |
| 17 | NTP 客户端时间源计数 |
NTP Client Time Source Count |
| 18 | NTP Client Time Source Count |
NTP Client Time Source Count |
| 19 | NTP 客户端正在使用的活动 NTP 时间源数。这是与此客户端的请求对应的时间服务器的不同活动 IP 地址的计数。此数量可以大于或小于配置的对等方数，具体取决于对等方名称的 DNS 解析和当前的可访问性。 |
Active number of NTP Time sources being used by the NTP Client. This is a count of active, distinct IP addresses of time servers that are responding to this client's requests. This number may be larger or smaller than the configured peers, depending on DNS resolution of peer names and current reachability. |
| 21 | NTP 服务器传入请求数 |
NTP Server Incoming Requests |
| 22 | NTP Server Incoming Requests |
NTP Server Incoming Requests |
| 23 | NTP 服务器收到的请求数(请求数/秒)。 |
Number of requests received by the NTP Server (Requests/Sec). |
| 25 | NTP 服务器传出响应数 |
NTP Server Outgoing Responses |
| 26 | NTP Server Outgoing Responses |
NTP Server Outgoing Responses |
| 27 | NTP 服务器响应的请求数(响应数/秒)。 |
Number of requests answered by NTP Server (Responses/Sec). |
| 200 | Windows Time |
Windows Time |
| 201 | 维护在网络上的所有客户端和服务器的时间和日期同步。如果此服务被停止，时间和日期的同步将不可用。如果此服务被禁用，任何明确依赖它的服务都将不能启动。 |
Maintains date and time synchronization on all clients and servers in the network. If this service is stopped, date and time synchronization will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. |
| 202 | Microsoft Corporation |
Microsoft Corporation |
| 0x1 | 时间提供程序 '%1' 记录了如下错误: %2 |
The time provider '%1' logged the following error: %2 |
| 0x2 | 时间提供程序 '%1' 记录了如下警告: %2 |
The time provider '%1' logged the following warning: %2 |
| 0x3 | 时间提供程序 '%1' 记录了如下消息: %2 |
The time provider '%1' logged the following message: %2 |
| 0x4 | 时间提供程序 '%1' 启动失败，由于下列原因: %2 |
The time provider '%1' failed to start due to the following error: %2 |
| 0x5 | 时间提供程序 '%1' 由于关闭，返回了下列错误: %2 |
The time provider '%1' returned the following error during shutdown: %2 |
| 0x6 | 时间服务在从注册表中读取它的配置时遇到了一个错误，将用它以前的配置继续运行。错误为: %1 |
The time service encountered an error while reading its configuration from the registry, and will continue running with its previous configuration. The error was: %1 |
| 0x7 | 时间提供程序 '%1' 在更新它的配置时返回了一个错误。错误将被忽略。错误为: %2 |
The time provider '%1' returned an error while updating its configuration. The error will be ignored. The error was: %2 |
| 0x8 | 时间提供程序 '%1' 在被提醒一个轮询间隔更改时返回一个错误。此错误将被忽略。错误为: %2 |
The time provider '%1' returned an error when notified of a polling interval change. The error will be ignored. The error was: %2 |
| 0x9 | 时间提供程序 '%1' 在被提醒一个时间跳跃时返回一个错误。此错误将被忽略。错误为: %2 |
The time provider '%1' returned an error when notified of a time jump. The error will be ignored. The error was: %2 |
| 0xA | 时间提供程序 '%1' 在被问及时间戳时返回一个错误。此错误将被忽略。错误为: %2 |
The time provider '%1' returned an error when asked for time samples. The error will be ignored. The error was: %2 |
| 0xB | 时间提供程序 NtpClient: 此计算机配置为用域层级确定它的时间源，但它不是域的一个成员。NtpClient 将尝试使用一个可选的已配置的外部时间源，如果可用的话。如果外部时间源没有配置或被其他计算机使用，你可以选择禁用 NtpClient。 |
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is not a member of a domain. NtpClient will attempt to use an alternate configured external time source if available. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient. |
| 0xC | 时间提供程序 NtpClient: 此机器配置为用域层级确定它的时间源，但它已经是在林的根目录域的 AD PDC 仿真，因此在域层级没有机器在它上面以用作时间源。建议你在根域上配置一个可靠的时间服务，或者手动配置 AD PDC 与外部时间源同步。否则，此机器将在域层级中作为权威的时间源。如果没有为此计算机配置或使用外部时间源，你可以选择禁用 NtpClient。 |
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but it is the AD PDC emulator for the domain at the root of the forest, so there is no machine above it in the domain hierarchy to use as a time source. It is recommended that you either configure a reliable time service in the root domain, or manually configure the AD PDC to synchronize with an external time source. Otherwise, this machine will function as the authoritative time source in the domain hierarchy. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient. |
| 0xD | 时间提供程序 NtpClient: 此计算机配置为用域层级确定它的时间源，但它加入到一个 Windows NT 4.0 域。Windows NT 4.0 域控制器没有时间服务，并且不支持域层级作为时间源。NtpClient 将尝试使用一个可选的已配置的外部时间源，如果可用的话。如果外部时间源没有配置或被其它计算机使用，你可以选择禁用 NtpClient。 |
Time Provider NtpClient: This machine is configured to use the domain hierarchy to determine its time source, but the computer is joined to a Windows NT 4.0 domain. Windows NT 4.0 domain controllers do not have a time service and do not support domain hierarchy as a time source. NtpClient will attempt to use an alternate configured external time source if available. If an external time source is not configured or used for this computer, you may choose to disable the NtpClient. |
| 0xE | 时间提供程序 NtpClient 找不到一个域控制器用作时间源。NtpClient 将在 %1 分钟内重试。 |
The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will try again in %1 minutes. |
| 0xF | 时间提供程序 NtpClient 找不到一个域控制器作为时间源。NtpClient 将回退到剩下的配置的时间源，如果有可用的话。错误为: %1 |
The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will fall back to the remaining configured time sources, if any are available. The error was: %1 |
| 0x10 | 时间提供程序 NtpClient: 在 DNS 查询手动配置的对等机“%1”时发生一个错误。此对等机将不会被用作时间源。错误为: %2 |
Time Provider NtpClient: An unexpected error occurred during DNS lookup of the manually configured peer '%1'. This peer will not be used as a time source. The error was: %2 |
| 0x11 | 时间提供程序 NtpClient: 在 DNS 查询手动配置的对等机“%1”时发生一个错误。NtpClient 将在 %3 分钟内重试 NDS 查询。错误为: %2 |
Time Provider NtpClient: An error occurred during DNS lookup of the manually configured peer '%1'. NtpClient will try the DNS lookup again in %3 minutes. The error was: %2 |
| 0x12 | 时间提供程序 NtpClient 在此计算机和 %1 域之间建立信任关系以安全的同步时间失败。NtpClient 将在 %3 分钟内重试 NDS 查询。错误为: %2 |
The time provider NtpClient failed to establish a trust relationship between this computer and the %1 domain in order to securely synchronize time. NtpClient will try again in %3 minutes. The error was: %2 |
| 0x13 | 请求了日志记录，但是时间服务在尝试设置日志文件 %1 时遇到了错误。错误为: %2。请确保“本地服务”有写入文件或目录的权限。 |
Logging was requested, but the time service encountered an error while trying to set up the log file: %1. The error was: %2. Please make sure that 'Local Service' has permission to write to the file or directory. |
| 0x14 | 要求了日志记录，但是时间服务载尝试写入日志文件 %1 时遇到了一个错误。错误为: %2 |
Logging was requested, but the time service encountered an error while trying to write to the log file: %1. The error was: %2 |
| 0x15 | 时间服务配置为使用一个或多个输入的提供程序，但是，没有一个输入的提供程序可用。时间服务没有准确时间的时间源。 |
The time service is configured to use one or more input providers, however, none of the input providers are available. The time service has no source of accurate time. |
| 0x16 | 时间提供程序 NtpServer 为对等机 %1 的 NTP 响应进行数字签名时遇到一个错误。NtpServer 不能向客户端提供安全的(已签名的)时间，将忽略此请求。错误为: %2 |
The time provider NtpServer encountered an error while digitally signing the NTP response for peer %1. NtpServer cannot provide secure (signed) time to the client and will ignore the request. The error was: %2 |
| 0x17 | 时间提供程序 NtpServer 在为相称的对等机 %1 对 NTP 响应进行数字签名时遇到一个错误。NtpServer 不能为此对等机提供安全的(已签名的)时间，将不会发送数据包。错误为: %2 |
The time provider NtpServer encountered an error while digitally signing the NTP response for symmetric peer %1. NtpServer cannot provide secure (signed) time to the peer and will not send a packet. The error was: %2 |
| 0x18 | 时间提供程序 NtpClient: 在尝试联系域控制器 %1 8 次以后，仍然没有收到有效的响应。此域控制器将不再作为时间源使用，并且 NtpClient将尝试发现一个新的域控制器来同步。错误为: %2 |
Time Provider NtpClient: No valid response has been received from domain controller %1 after 8 attempts to contact it. This domain controller will be discarded as a time source and NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: %2 |
| 0x19 | 时间提供程序 NtpClient 不能确定从 %1 收到的响应是否是一个有效的签名。响应将被忽略。错误为: %2 |
The time provider NtpClient cannot determine whether the response received from %1 has a valid signature. The response will be ignored. The error was: %2 |
| 0x1A | 时间提供程序 NtpClient: 从域控制器 %1 收到的响应有一个错误的签名。此响应可能被篡改过，将被忽略。 |
Time Provider NtpClient: The response received from domain controller %1 has a bad signature. The response may have been tampered with and will be ignored. |
| 0x1B | 时间提供程序 NtpClient: 从域控制器 %1 收到的响应缺少签名。此响应可能被篡改过，将被忽略。 |
Time Provider NtpClient: The response received from domain controller %1 is missing the signature. The response may have been tampered with and will be ignored. |
| 0x1C | 时间服务提供程序 NtpClient 配置为从一个或多个时间源获得时间，但是这些源没有一个可以访问。NtpClient 没有准确时间的时间源。 |
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are accessible. NtpClient has no source of accurate time. |
| 0x1D | 时间服务提供程序 NtpClient 配置为从一个或多个时间源获得时间，但是，没有一个源可以访问。在 %1 分钟内不会进行联系时间源的尝试。NtpClient 没有准确时间的时间源。 |
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for %1 minutes. NtpClient has no source of accurate time. |
| 0x1E | 时间服务在从注册表读取它的配置时遇到错误，无法启动。错误为: %1 |
The time service encountered an error while reading its configuration from the registry and cannot start. The error was: %1 |
| 0x1F | 时间服务发现系统时区信息损坏。因为许多系统组件要求有效的时区信息，时间服务重置系统时区为 GMT。使用日期/时间控制面板设置正确的时区。 |
The time service discovered that the system time zone information was corrupted. Because many system components require valid time zone information, the time service has reset the system time zone to GMT. Use the Date/Time control panel to set the correct time zone. |
| 0x20 | 时间服务发现系统时区信息损坏。时间服务尝试重置系统时区为 GMT，但是失败。时间服务不能启动。错误为: %1 |
The time service discovered that the system time zone information was corrupted. The time service tried to reset the system time zone to GMT, but failed. The time service cannot start. The error was: %1 |
| 0x21 | 时间服务比本地系统时钟提前了 %1 秒。当时间源和本地系统时间时差过大，无法调节时钟速率以达到由时间源所指定的时间时，就会发生这种情况。 |
The time service has jumped the local system clock by %1 seconds. This occurs when the time source and local system time are far enough apart that clock rate adjustments cannot be made to reach the time specified by the time source. |
| 0x22 | 时间服务检测到系统时间需要更改 %1 秒。时间服务将不会更改系统时间超过 %2 秒。请验证你的时间和时区是正确的，并且时间源 %3 工作正常。 |
The time service has detected that the system time needs to be changed by %1 seconds. The time service will not change the system time by more than %2 seconds. Verify that your time and time zone are correct, and that the time source %3 is working properly. |
| 0x23 | 时间服务现在用时间源 %1 同步系统时间。 |
The time service is now synchronizing the system time with the time source %1. |
| 0x24 | 时间服务尚未同步最后 %1 秒钟的系统时间，原因是没有任何时间服务提供程序提供可用的时间戳。只有与时间源同步，时间服务才会更新本地系统时间。如果将本地系统配置为用作客户端的时间服务器，它将在 %2 秒后停止作为时间源向客户端进行公布。时间服务将继续重试，并与其时间源同步时间。有关详细信息，请查看其他 Win32 时间事件的系统事件日志。运行 \"w32tm /resync\" 强制执行即时时间同步。可以使用 ClockHoldoverPeriod W32time 配置设置来控制时间源重新发现频率。如果希望禁用此消息，请修改 EventLogFlags W32time 配置设置。 |
The time service has not synchronized the system time for the last %1 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients after %2 seconds. The time service will continue to retry and sync time with its time sources. Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization. You can control the frequency of the time source rediscovery using ClockHoldoverPeriod W32time config setting. Modify the EventLogFlags W32time config setting if you wish to disable this message. |
| 0x25 | 时间提供程序 NtpClient 正在从 %1 接收有效的时间数据。 |
The time provider NtpClient is currently receiving valid time data from %1. |
| 0x26 | 时间提供程序 NtpClient 未接收到服务器 server %1 的响应。 |
The time provider NtpClient has not received response from server %1. |
| 0x27 | 时间服务不能为网络配置更改事件注册。这可能是由于 TCP/IP 没有正确配置。时间服务将不能从网络上同步时间，但是将仍然能够从任何本地安装的硬件同步时间，如果有可用的话。 |
The time service is unable to register for network configuration change events. This may occur when TCP/IP is not correctly configured. The time service will be unable to sync time from network providers, but will still use locally installed hardware provdiers, if any are available. |
| 0x28 | 时间提供程序 '%1' 终止，错误是 %2。 |
The time provider '%1' was stopped with error %2. |
| 0x29 | 时间服务配置为使用一个或多个输入提供程序，但是没有一个提供程序还在运行。时间服务没有得到准确时间的来源。 |
The time service has been configured to use one or more input providers, however, none of the input providers are still running. The time service has no source of accurate time. |
| 0x2A | 时间服务尝试创建一个已经打开的名称事件。这可能是一个危害你的计算机安全性的尝试的结果。 |
The time service attempted to create a named event which was already opened. This could be the result of an attempt to compromise your system's security. |
| 0x2B | 时间提供程序 '%1' 在通报网络配置更改时返回一个错误。错误将被忽略。错误是: %2 |
The time provider '%1' returned an error when notified of a network configuration change. The error will be ignored. The error was: %2 |
| 0x2C | 时间服务提供程序 NtpClient 遇到一个错误并被强制关闭。错误是: %1 |
The time provider NtpClient encountered an error and was forced to shut down. The error was: %1 |
| 0x2D | 时间服务提供程序 NtpServer 遇到一个错误并被强制关闭。错误是: %1 |
The time provider NtpServer encountered an error and was forced to shut down. The error was: %1 |
| 0x2E | 时间服务遇到一个错误并被强制关闭。错误是: %1 |
The time service encountered an error and was forced to shut down. The error was: %1 |
| 0x2F | 时间提供程序 NtpClient: 在尝试联系它 8 次以后没有收到来自手动配置 的对等机 %1 的有效响应。此对等机将不再被作为时间源，并且 NtpClient将尝试用此 DNS 名称发现一个新的对等机。错误为: %2 |
Time Provider NtpClient: No valid response has been received from manually configured peer %1 after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name. The error was: %2 |
| 0x30 | 时间提供程序 NtpClient: 在手动配置的对等机“%1”的 DNS 查询中发生了一个错误。NtpClient 将继续尝试每隔 %3 分钟进行 DNS 查询。此消息将不再被记录，直到此手动配置的对等机的 DNS 查询成功。错误为: %2 |
Time Provider NtpClient: An error occurred during DNS lookup of the manually configured peer '%1'. NtpClient will continue to try the DNS lookup every %3 minutes. This message will not be logged again until a successful lookup of this manually configured peer occurs. The error was: %2 |
| 0x31 | 时间提供程序 NtpClient 找不到可以用作时间源的域控制器。NtpClient 将继续尝试每隔 %1 分钟进行 AD DC 定位。此消息将不再被记录，直到发现一个域控制器。 |
The time provider NtpClient was unable to find a domain controller to use as a time source. NtpClient will continue trying to locate an AD DC every %1 minutes. This message will not be logged again until after a domain controller is found. |
| 0x32 | 时间服务检测到大于 %1 毫秒的时间差，持续 %2 秒。时间差可能是由于与精确性低的时间源同步或网络条件不太好造成的。时间服务不再是同步的，也不能为其它客户端提供时间或者更新系统时钟。在从一个时间服务提供程序收到有效的时间戳后，时间服务将更正它自己。 |
The time service detected a time difference of greater than %1 milliseconds for %2 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself. |
| 0x33 | 时间提供程序 NtpClient: 从对等机 %1 收到的时间示例与本地时间相差 %2 秒。观察到的来自服务器的传输延迟是 %3 毫秒。 |
Time Provider NtpClient: The time sample received from peer %1 differs from the local time by %2 seconds. The observed transmission delay from the server was %3 milliseconds. |
| 0x34 | 时间服务已经设置了时间，调整的误差为 %1 秒。 |
The time service has set the time with offset %1 seconds. |
| 0x35 | 时间提供程序 NtpClient 无法将请求发送到服务器 %1。 |
The time provider NtpClient fails sending request to server %1. |
| 0x36 | 时间服务在刷新注册表中的配置时遇到错误，无法启动。错误为: %1 |
The time service encountered an error while refreshing its configuration in the registry and cannot start. The error was: %1 |
| 0x5A | NoAuth |
NoAuth |
| 0x5B | NtDigest |
NtDigest |
| 0x5C | 无法连接到对等机。 |
The peer is unreachable. |
| 0x5E | 时间示例被拒绝，因为: 从此对等机上收到了重复的时间戳。 |
The time sample was rejected because: Duplicate timestamps were received from this peer. |
| 0x5F | 时间示例被拒绝，因为: 消息接收的次序不对。 |
The time sample was rejected because: Message was received out-of-order. |
| 0x60 | 时间示例被拒绝，因为: 对等机没有同步，或失去单向或双向连接。这还表示此对等机错误地发送了一个 NTP 请求而不是 NTP 响应。 |
The time sample was rejected because: The peer is not synchronized, or reachability has been lost in one, or both, directions. This may also indicate that the peer has incorrectly sent an NTP request instead of an NTP response. |
| 0x61 | 时间示例被拒绝，因为: 双程延迟时间太长。 |
The time sample was rejected because: Round-trip delay too large. |
| 0x62 | 时间示例被拒绝，因为: 数据包没有经过身份验证。 |
The time sample was rejected because: Packet not authenticated. |
| 0x63 | 时间示例被拒绝，因为: 对等机没有同步，或者对等机距上次同步的间隔太长。 |
The time sample was rejected because: The peer is not synchronized, or it has been too long since the peer's last synchronization. |
| 0x64 | 时间示例被拒绝，因为: 对等机的层次比主机层次少。 |
The time sample was rejected because: The peer's stratum is less than the host's stratum. |
| 0x65 | 时间示例被拒绝，因为: 数据包含有不合理的根延迟或根分散值。这可能是由于网络状况不好造成的。 |
The time sample was rejected because: Packet contains unreasonable root delay or root dispersion values. This may be caused by poor network conditions. |
| 0x66 | 保持网络中所有客户端与服务器的日期和时间同步。如果此服务已停止，日期和时间同步将不可用。如果此服务已禁用，任何明确依赖它的服务将无法启动。%0 |
Maintains date and time synchronization on all clients and servers in the network. If this service is stopped, date and time synchronization will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start.%0 |
| 0x67 | 服务器无法对 netlogon 失败的请求进行身份验证。 |
The server fails authenticating a request with netlogon failure. |
| 0x68 | 客户端无法发出请求。 |
The client fails sending out a request. |
| 0x69 | 客户端无法对 netlogon 失败的响应进行身份验证。 |
The client fails authenticating a response with netlogon failure. |
| 0x6A | 客户端无法对签名错误的响应进行身份验证。 |
The client fails authenticating a response with a bad signature. |
| 0x6B | 客户端无法对缺少签名的响应进行身份验证。 |
The client fails authenticating a response with a missing signature. |
| 0x70 | 对等机未解析。 |
The peer is unresolved. |
| 0x81 | NtpClient 无法将域对等机设置为用作时间源，因为有发现错误。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x82 | NtpClient 无法将域对等机设置为用作时间源，因为无法在此计算机和“%3”域之间建立一种信任关系以便安全地同步时间。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a domain peer to use as a time source because of failure in establishing a trust relationship between this computer and the '%3' domain in order to securely synchronize time. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x83 | NtpClient 无法将域对等机设置为用作时间源，因为“%3”上出现 DNS 解析错误。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1。 |
NtpClient was unable to set a domain peer to use as a time source because of DNS resolution error on '%3'. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1. |
| 0x84 | NtpClient 无法将域对等机设置为用作时间源，因为“%3”上出现重复错误。NtpServer 中的相同时间源“%4”已指定为手动对等。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a domain peer to use as a time source because of duplicate error on '%3'. The same time source '%4' has been specified as manual peer in NtpServer. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x85 | NtpClient 无法将域对等机设置为用作时间源，因为出现意外错误。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a domain peer to use a time source because of an unexpected error. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x86 | NtpClient 无法将手动对等机设置为用作时间源，因为“%3”上出现 DNS 解析错误。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on '%3'. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x87 | NtpClient 无法将手动对等机设置为用作时间源，因为“%3”上出现重复错误。相同时间源“%4”已指定为 NtpServer 中的手动对等或选为域对等。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a manual peer to use as a time source because of duplicate error on '%3'. The same time source '%4' has been either specified as manual peer in NtpServer or selected as domain peer. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x88 | NtpClient 无法将手动对等机设置为用作时间源，因为出现意外错误。NtpClient 将在 %2 分钟后重试，此后重试间隔增加一倍。错误为: %1 |
NtpClient was unable to set a manual peer to use as a time source because of an unexpected error. NtpClient will try again in %2 minutes and double the reattempt interval thereafter. The error was: %1 |
| 0x89 | 在上次失败后，NtpClient 成功解析手动对等机 %1。 |
NtpClient succeeds in resolving manual peer %1 after a previous failure. |
| 0x8A | 在上次失败后，NtpClient 成功解析域对等机 %1。 |
NtpClient succeeds in resolving domain peer %1 after a previous failure. |
| 0x8B | 时间服务已开始作为时间源播发。 |
The time service has started advertising as a time source. |
| 0x8C | 时间服务已停止作为时间源播发，原因是本地计算机不是 Active Directory 域控制器。 |
The time service has stopped advertising as a time source because the local machine is not an Active Directory Domain Controller. |
| 0x8D | 时间服务已停止作为时间源播发，原因是没有正在运行的提供程序。 |
The time service has stopped advertising as a time source because there are no providers running. |
| 0x8E | 时间服务已停止作为时间源播发，原因是本地时钟未同步。 |
The time service has stopped advertising as a time source because the local clock is not synchronized. |
| 0x8F | 时间服务已开始作为良好的时间源播发。 |
The time service has started advertising as a good time source. |
| 0x90 | 时间服务已停止作为良好的时间源播发。 |
The time service has stopped advertising as a good time source. |
| 0x91 | 时间服务已停止作为时间源播发。 |
The time service has stopped advertising as a time source. |
| 0x92 | 在前面的 %2 分钟内 RODC 已接收到 %1 个请求。%3 已导致成功，而 %4 已导致失败。 |
The RODC has received %1 requests in the previous %2 minutes. %3 have resulted in success, and %4 have resulted in failure. |
| 0x9B | NtSignature |
NtSignature |
| 0x9C | RODC 无法转发来自客户端 RID %1 的时间同步请求，因为客户端的 RID 值太大，并且域对等机(%2)不支持上层时间同步身份验证格式。 |
The RODC was unable to forward a time sync request from client RID %1 because the client's RID value is too large and the domain peer (%2) does not support the uplevel timesync authentication format. |
| 0x9D | 时间提供程序 NtpServer 收到来自客户端(%1)的采用旧协议格式的请求。按照 RequireSecureTimeSyncRequests 策略设置，已忽略该请求。默认情况下，每天对唯一客户端地址仅记录此消息一次。 |
The time provider NtpServer received a request from a client (%1) using a legacy protocol format. The request has been ignored per the RequireSecureTimeSyncRequests policy setting. By default, this message will be logged only once per day per unique client address. |
| 0x9E | 时间提供程序“%1”指示，当前的硬件和运行环境不受支持并且已停止。对于非 HyperV 来宾环境中的 VMICTimeProvider，这是正常现象。对于当前操作环境中的当前提供程序，这可能也是正常现象。 |
The time provider '%1' has indicated that the current hardware and operating environment is not supported and has stopped. This behavior is expected for VMICTimeProvider on non-HyperV-guest environments. This may be the expected behavior for the current provider in the current operating environment as well. |
| 0x9F | W32time 无法与 Netlogon 服务进行通信。除造成 Netlogon 无法公布正确 W32time 服务状态的问题外，此失败还会阻止 NTPClient 发现和使用域对等机。这可能是暂时的，不久就会自行解决。如果此警告在长时间内重复出现，请确保 Netlogon 服务正在运行且有响应，并重启 W32time 服务以重新初始化总体状态。该错误为 %1 |
W32time is unable to communicate with Netlogon Service. This failure prevents NTPClient from discovering and using domain peers, besides causing problems with correct W32time service state being advertised by Netlogon. This could be a temporary condition that resolves itself shortly. If this warning repeats over a considerable period of time, ensure the Netlogon service is running and is responsive and restart W32time service to reintiaize the overall state. The error was %1 |
| 0x50000002 | 错误 |
Error |
| 0x50000003 | 警告 |
Warning |
| 0x50000004 | 信息 |
Information |
| 0x90000001 | Microsoft-Windows-Time-Service |
Microsoft-Windows-Time-Service |
| 0x90000002 | System |
System |