257 | WLAN AutoConfig |
WLAN AutoConfig |
258 | The WLANSVC service provides the logic required to configure, discover, connect to, and disconnect from a wireless local area network (WLAN) as defined by IEEE 802.11 standards. It also contains the logic to turn your computer into a software access point so that other devices or computers can connect to your computer wirelessly using a WLAN adapter that can support this. Stopping or disabling the WLANSVC service will make all WLAN adapters on your computer inaccessible from the Windows networking UI. It is strongly recommended that you have the WLANSVC service running if your computer has a WLAN adapter. |
The WLANSVC service provides the logic required to configure, discover, connect to, and disconnect from a wireless local area network (WLAN) as defined by IEEE 802.11 standards. It also contains the logic to turn your computer into a software access point so that other devices or computers can connect to your computer wirelessly using a WLAN adapter that can support this. Stopping or disabling the WLANSVC service will make all WLAN adapters on your computer inaccessible from the Windows networking UI. It is strongly recommended that you have the WLANSVC service running if your computer has a WLAN adapter. |
259 | Manual connection with a profile |
Manual connection with a profile |
260 | Connection with a temporary profile |
Connection with a temporary profile |
261 | Connection to a secure network without a profile |
Connection to a secure network without a profile |
262 | Connection to an unsecure network without a profile |
Connection to an unsecure network without a profile |
263 | Automatic connection with a profile |
Automatic connection with a profile |
267 | The network is disconnected by the driver. |
The network is disconnected by the driver. |
268 | The network is disconnected because AutoConfig is switching to a more preferred network. |
The network is disconnected because AutoConfig is switching to a more preferred network. |
269 | The network is disconnected by the user. |
The network is disconnected by the user. |
270 | The network is disconnected because the user wants to establish a new connection. |
The network is disconnected because the user wants to establish a new connection. |
273 | Conflict found |
Conflict found |
274 | %1!s! are on different Wi-Fi channels. Performance might be degraded. |
%1!s! are on different Wi-Fi channels. Performance might be degraded. |
275 | %1!s! are on different Wi-Fi channels. You can try reconnecting to your Wireless Display if performance is degraded. |
%1!s! are on different Wi-Fi channels. You can try reconnecting to your Wireless Display if performance is degraded. |
276 | %1!s! couldn’t start because it can’t be used with %2!s!. |
%1!s! couldn’t start because it can’t be used with %2!s!. |
277 | %1!s! was stopped because it can't be used with %2!s!. |
%1!s! was stopped because it can't be used with %2!s!. |
278 | %1!s! were stopped because they can't be used with %2!s!. |
%1!s! were stopped because they can't be used with %2!s!. |
279 | %1!s! can't start because it can’t be used with %2!s!. Close %3!s! connection? |
%1!s! can't start because it can’t be used with %2!s!. Close %3!s! connection? |
4097 | Wireless Adapter Settings |
Wireless Adapter Settings |
4098 | Configure wireless adapter power settings. |
Configure wireless adapter power settings. |
4099 | Power Saving Mode |
Power Saving Mode |
4100 | Control the power saving mode of wireless adapters. |
Control the power saving mode of wireless adapters. |
4101 | Maximum Performance |
Maximum Performance |
4102 | Achieve maximum wireless performance with no power savings. |
Achieve maximum wireless performance with no power savings. |
4103 | Low Power Saving |
Low Power Saving |
4104 | Achieve minimum power savings. |
Achieve minimum power savings. |
4105 | Medium Power Saving |
Medium Power Saving |
4106 | Balance between performance and power savings based on network traffic. |
Balance between performance and power savings based on network traffic. |
4107 | Maximum Power Saving |
Maximum Power Saving |
4108 | Achieve maximum power savings. |
Achieve maximum power savings. |
8193 | The operation was successful. |
The operation was successful. |
8194 | Failed for an unknown reason. |
Failed for an unknown reason. |
12289 | The wireless network is not compatible. |
The wireless network is not compatible. |
12290 | The profile for the wireless network is not compatible. |
The profile for the wireless network is not compatible. |
14337 | The profile is not set to connect automatically. |
The profile is not set to connect automatically. |
14338 | The wireless network is not visible. |
The wireless network is not visible. |
14339 | The wireless network is blocked by the group policy. |
The wireless network is blocked by the group policy. |
14340 | The wireless network is blocked by the user. |
The wireless network is blocked by the user. |
14341 | The BSS type is not allowed on this wireless adapter. |
The BSS type is not allowed on this wireless adapter. |
14342 | The wireless network is on the failed list. |
The wireless network is on the failed list. |
14343 | The wireless network is on the blocked list. |
The wireless network is on the blocked list. |
14344 | The size of the SSID list exceeds the maximum size supported by the adapter. |
The size of the SSID list exceeds the maximum size supported by the adapter. |
14345 | The MSM connect call failed. |
The MSM connect call failed. |
14346 | The MSM scan call failed. |
The MSM scan call failed. |
14347 | The specific network is not available. |
The specific network is not available. |
14348 | The profile used for the connection has changed or been deleted. |
The profile used for the connection has changed or been deleted. |
14349 | The password for the network might not be correct. |
The password for the network might not be correct. |
14350 | The information required from the user was not received. |
The information required from the user was not received. |
14351 | Access Point profile is not allowed for old version client. |
Access Point profile is not allowed for old version client. |
14352 | Access Point profile is not allowed by user or group policy. |
Access Point profile is not allowed by user or group policy. |
16385 | The profile is invalid according to the schema. |
The profile is invalid according to the schema. |
16386 | The WLAN profile element is missing. |
The WLAN profile element is missing. |
16387 | The name of the profile is invalid. |
The name of the profile is invalid. |
16388 | The type of the profile is invalid. |
The type of the profile is invalid. |
16389 | The PHY type is invalid. |
The PHY type is invalid. |
16390 | The MSM security settings are missing. |
The MSM security settings are missing. |
16391 | The IHV security settings are not supported. |
The IHV security settings are not supported. |
16392 | The IHV profile OUI did not match with the adapter OUI. |
The IHV profile OUI did not match with the adapter OUI. |
16393 | The IHV OUI settings are missing. |
The IHV OUI settings are missing. |
16394 | The IHV security settings are missing. |
The IHV security settings are missing. |
16395 | Both Microsoft and IHV security settings exist in the profile. |
Both Microsoft and IHV security settings exist in the profile. |
16396 | No security settings exist in the profile. |
No security settings exist in the profile. |
16397 | The BSS type is not valid. |
The BSS type is not valid. |
16398 | Automatic connection cannot be set for an ad hoc network. |
Automatic connection cannot be set for an ad hoc network. |
16399 | Non-broadcast cannot be set for an ad hoc network. |
Non-broadcast cannot be set for an ad hoc network. |
16400 | Auto-switch cannot be set for an ad hoc network. |
Auto-switch cannot be set for an ad hoc network. |
16401 | Auto-switch cannot be set for a manual connection profile. |
Auto-switch cannot be set for a manual connection profile. |
16402 | 1X setting is missing for IHV security. |
1X setting is missing for IHV security. |
16403 | The SSID in the profile is invalid or missing. |
The SSID in the profile is invalid or missing. |
16404 | Too many SSIDs specified in a profile. |
Too many SSIDs specified in a profile. |
16417 | The IHV connectivity settings are not supported. |
The IHV connectivity settings are not supported. |
16433 | The maximum number of clients is not a valid value in Access Point mode. |
The maximum number of clients is not a valid value in Access Point mode. |
16434 | The specified channel is not valid. |
The specified channel is not valid. |
16435 | The operation mode is not supported by the driver. |
The operation mode is not supported by the driver. |
16436 | Auto-connect or auto-switch should not be set for an AP profile. |
Auto-connect or auto-switch should not be set for an AP profile. |
16437 | Automatic connection is not allowed. |
Automatic connection is not allowed. |
20481 | The security settings are not supported by the operating system. |
The security settings are not supported by the operating system. |
20482 | The security settings are not supported. |
The security settings are not supported. |
20483 | The BSS type does not match. |
The BSS type does not match. |
20484 | The PHY type does not match. |
The PHY type does not match. |
20485 | The data rate does not match. |
The data rate does not match. |
22529 | The operation was cancelled. |
The operation was cancelled. |
22530 | The driver disconnected while associating. |
The driver disconnected while associating. |
22531 | Association with the network timed out. |
Association with the network timed out. |
22532 | Pre-association security failed. |
Pre-association security failed. |
22533 | Failed to start security after association. |
Failed to start security after association. |
22534 | Security failed. |
Security failed. |
22535 | Security operation times out. |
Security operation times out. |
22536 | The driver disconnected while roaming. |
The driver disconnected while roaming. |
22537 | Failed to start security for roaming. |
Failed to start security for roaming. |
22538 | Failed to start security for Ad hoc peer. |
Failed to start security for Ad hoc peer. |
22539 | The driver disconnected. |
The driver disconnected. |
22540 | The driver failed to perform some operations. |
The driver failed to perform some operations. |
22541 | The IHV service is not available. |
The IHV service is not available. |
22542 | The IHV service timed out. |
The IHV service timed out. |
22543 | The driver disconnect timed out. |
The driver disconnect timed out. |
22544 | An internal failure prevented the operation from completing. |
An internal failure prevented the operation from completing. |
22545 | The UI Request timed out. |
The UI Request timed out. |
22546 | The computer is roaming too often. The security check did not complete after several attempts. |
The computer is roaming too often. The security check did not complete after several attempts. |
22547 | The driver failed to start as Access Point. |
The driver failed to start as Access Point. |
24577 | Failed to queue UI request |
Failed to queue UI request |
24578 | 802.1x authentication did not start within configured time |
802.1x authentication did not start within configured time |
24579 | 802.1x authentication did not complete within configured time |
802.1x authentication did not complete within configured time |
24580 | Dynamic key exchange did not start within configured time |
Dynamic key exchange did not start within configured time |
24581 | Dynamic key exchange did not succeed within configured time |
Dynamic key exchange did not succeed within configured time |
24582 | Message 3 of 4 way handshake has no key data (RSN/WPA) |
Message 3 of 4 way handshake has no key data (RSN/WPA) |
24583 | Message 3 of 4 way handshake has no IE (RSN/WPA) |
Message 3 of 4 way handshake has no IE (RSN/WPA) |
24584 | Message 3 of 4 way handshake has no Group Key (RSN) |
Message 3 of 4 way handshake has no Group Key (RSN) |
24585 | Matching security capabilities of IE in M3 failed (RSN/WPA) |
Matching security capabilities of IE in M3 failed (RSN/WPA) |
24586 | Matching security capabilities of Secondary IE in M3 failed (RSN) |
Matching security capabilities of Secondary IE in M3 failed (RSN) |
24587 | Required a pairwise key but AP configured only group keys |
Required a pairwise key but AP configured only group keys |
24588 | Message 1 of group key handshake has no key data (RSN/WPA) |
Message 1 of group key handshake has no key data (RSN/WPA) |
24589 | Message 1 of group key handshake has no group key |
Message 1 of group key handshake has no group key |
24590 | AP reset secure bit after connection was secured |
AP reset secure bit after connection was secured |
24591 | 802.1x indicated there is no authenticator, but the profile requires 802.1x. |
802.1x indicated there is no authenticator, but the profile requires 802.1x. |
24592 | Plumbing settings to NIC failed |
Plumbing settings to NIC failed |
24593 | Operation was cancelled by caller |
Operation was cancelled by caller |
24594 | Key index specified is not valid |
Key index specified is not valid |
24595 | Key required, PSK present |
Key required, PSK present |
24596 | Invalid key length |
Invalid key length |
24597 | Invalid PSK length |
Invalid PSK length |
24598 | No auth/cipher specified |
No auth/cipher specified |
24599 | Too many auth/cipher specified |
Too many auth/cipher specified |
24600 | Profile contains duplicate auth/cipher |
Profile contains duplicate auth/cipher |
24601 | Profile raw data is invalid (1x or key data) |
Profile raw data is invalid (1x or key data) |
24602 | Invalid auth/cipher combination |
Invalid auth/cipher combination |
24603 | 802.1x disabled when it's required to be enabled |
802.1x disabled when it's required to be enabled |
24604 | 802.1x enabled when it's required to be disabled |
802.1x enabled when it's required to be disabled |
24605 | Invalid PMK cache mode |
Invalid PMK cache mode |
24606 | Invalid PMK cache size |
Invalid PMK cache size |
24607 | Invalid PMK cache TTL |
Invalid PMK cache TTL |
24608 | Invalid PreAuth mode |
Invalid PreAuth mode |
24609 | Invalid PreAuth throttle |
Invalid PreAuth throttle |
24610 | PreAuth enabled when PMK cache is disabled |
PreAuth enabled when PMK cache is disabled |
24611 | Capability matching failed at network |
Capability matching failed at network |
24612 | Capability matching failed at NIC |
Capability matching failed at NIC |
24613 | Capability matching failed at profile |
Capability matching failed at profile |
24614 | Network does not support specified discovery type |
Network does not support specified discovery type |
24615 | Passphrase contains invalid character |
Passphrase contains invalid character |
24616 | Key material contains invalid character |
Key material contains invalid character |
24617 | The key type specified does not match the key material |
The key type specified does not match the key material |
24618 | Entered key is not in a valid format |
Entered key is not in a valid format |
24619 | Mixed cell suspected (AP not beaconing privacy, we have privacy enabled profile) |
Mixed cell suspected (AP not beaconing privacy, we have privacy enabled profile) |
24620 | Security downgrade detected |
Security downgrade detected |
24621 | PSK mismatch suspected |
PSK mismatch suspected |
24622 | 802.1x authentication timers in profile are incorrect |
802.1x authentication timers in profile are incorrect |
24623 | Group key update interval in profile is incorrect |
Group key update interval in profile is incorrect |
24624 | Transition network suspected, trying legacy 802.11 security |
Transition network suspected, trying legacy 802.11 security |
24625 | Windows could not map all of the characters into US-ASCII. Security keys must be entered as US-ASCII characters. |
Windows could not map all of the characters into US-ASCII. Security keys must be entered as US-ASCII characters. |
24626 | Capability matching failed at profile (cipher not found). |
Capability matching failed at profile (cipher not found). |
24627 | Capability matching failed at profile (auth not found). |
Capability matching failed at profile (auth not found). |
24628 | Forced failure because the connection method was not secure. |
Forced failure because the connection method was not secure. |
24629 | The FIPS 140-2 mode value is not valid |
The FIPS 140-2 mode value is not valid |
24630 | The profile requires FIPS 140-2 mode, which is not supported by the network adapter. |
The profile requires FIPS 140-2 mode, which is not supported by the network adapter. |
24631 | The profile requires FIPS 140-2 mode, which is not supported by the network. |
The profile requires FIPS 140-2 mode, which is not supported by the network. |
24632 | Message 3 of 4 way handshake contains too many RSN IE (RSN) |
Message 3 of 4 way handshake contains too many RSN IE (RSN) |
24633 | Message 2 of 4 way handshake has no key data (RSN Adhoc) |
Message 2 of 4 way handshake has no key data (RSN Adhoc) |
24634 | Message 2 of 4 way handshake has no IE (RSN Adhoc) |
Message 2 of 4 way handshake has no IE (RSN Adhoc) |
24705 | The authentication algorithm in the profile is not supported. |
The authentication algorithm in the profile is not supported. |
24706 | The cipher algorithm in the profile is not supported. |
The cipher algorithm in the profile is not supported. |
24707 | WCN authentication is completed as expected. |
WCN authentication is completed as expected. |
28671 | Invalid Reason code |
Invalid Reason code |
36864 | WLAN Service - WFD Application Services Platform Coordination Protocol (Uses UDP) |
WLAN Service - WFD Application Services Platform Coordination Protocol (Uses UDP) |
36865 | WLAN Service - WFD Services Kernel Mode Driver Rules |
WLAN Service - WFD Services Kernel Mode Driver Rules |
37376 | WFD ASP Coordination Protocol (UDP-In) |
WFD ASP Coordination Protocol (UDP-In) |
37377 | WFD ASP Coordination Protocol (UDP-Out) |
WFD ASP Coordination Protocol (UDP-Out) |
37378 | WFD Driver-only (TCP-In) |
WFD Driver-only (TCP-In) |
37379 | WFD Driver-only (TCP-Out) |
WFD Driver-only (TCP-Out) |
37380 | WFD Driver-only (UDP-In) |
WFD Driver-only (UDP-In) |
37381 | WFD Driver-only (UDP-Out) |
WFD Driver-only (UDP-Out) |
37888 | Inbound rule for WLAN Service to allow coordination protocol for WFD Service sessions [UDP 7235] |
Inbound rule for WLAN Service to allow coordination protocol for WFD Service sessions [UDP 7235] |
37889 | Outbound rule for WLAN Service to allow coordination protocol for WFD Service sessions [UDP 7235] |
Outbound rule for WLAN Service to allow coordination protocol for WFD Service sessions [UDP 7235] |
37890 | Inbound rule for drivers to communicate over WFD (TCP-In) |
Inbound rule for drivers to communicate over WFD (TCP-In) |
37891 | Inbound rule for drivers to communicate over WFD (TCP-Out) |
Inbound rule for drivers to communicate over WFD (TCP-Out) |
37892 | Inbound rule for drivers to communicate over WFD (UDP-In) |
Inbound rule for drivers to communicate over WFD (UDP-In) |
37893 | Inbound rule for drivers to communicate over WFD (UDP-Out) |
Inbound rule for drivers to communicate over WFD (UDP-Out) |
46864 | WLAN service implements Application Services Platform (ASP) for WFD Services. This firewall rule allows the WLAN service to open the well-known UDP port for coordination of WFD Service sessions between two devices |
WLAN service implements Application Services Platform (ASP) for WFD Services. This firewall rule allows the WLAN service to open the well-known UDP port for coordination of WFD Service sessions between two devices |
46865 | WLAN service implements Application Services Platform (ASP) for WFD Services. This firewall rule allows the WFDSConMgr service to open ports for use by the MA-USB driver For connecting to WSB devices |
WLAN service implements Application Services Platform (ASP) for WFD Services. This firewall rule allows the WFDSConMgr service to open ports for use by the MA-USB driver For connecting to WSB devices |
53249 | %1!s! are on different WLAN channels. Performance might be degraded. |
%1!s! are on different WLAN channels. Performance might be degraded. |
53250 | %1!s! are on different WLAN channels. You can try reconnecting to your Wireless Display if performance is degraded. |
%1!s! are on different WLAN channels. You can try reconnecting to your Wireless Display if performance is degraded. |
0xFA0 | WLAN AutoConfig service has successfully started.%n |
WLAN AutoConfig service has successfully started.%n |
0xFA1 | WLAN AutoConfig service has successfully stopped.%n |
WLAN AutoConfig service has successfully stopped.%n |
0xFA2 | WLAN AutoConfig service has failed to start.%n%nError Code: %1%n |
WLAN AutoConfig service has failed to start.%n%nError Code: %1%n |
0xFA3 | WLAN AutoConfig detected limited connectivity, attempting automatic recovery.%n%nRecovery Type: %1%nError Code: %2%nTrigger Reason: %3%nIP Family: %4%n |
WLAN AutoConfig detected limited connectivity, attempting automatic recovery.%n%nRecovery Type: %1%nError Code: %2%nTrigger Reason: %3%nIP Family: %4%n |
0x00002710 | WLAN Extensibility Module has failed to start.%n%nModule Path: %1%nError Code: %2%n |
WLAN Extensibility Module has failed to start.%n%nModule Path: %1%nError Code: %2%n |
0x00002711 | WLAN Extensibility Module has successfully started.%n%nModule Path: %1%n |
WLAN Extensibility Module has successfully started.%n%nModule Path: %1%n |
0x00002712 | WLAN Extensibility Module has stopped.%n%nModule Path: %1%n |
WLAN Extensibility Module has stopped.%n%nModule Path: %1%n |
0x00002713 | WLAN Extensibility Module has stopped unexpectedly.%n%nModule Path: %1%n |
WLAN Extensibility Module has stopped unexpectedly.%n%nModule Path: %1%n |
0x00002714 | WLAN Extensibility Module has timed out.%n%nModule Path: %1%n |
WLAN Extensibility Module has timed out.%n%nModule Path: %1%n |
0x10000031 | Response Time |
Response Time |
0x30000000 | Info |
Info |
0x30000001 | Start |
Start |
0x30000002 | Stop |
Stop |
0x300000B4 | Start State |
Start State |
0x300000B5 | End State |
End State |
0x300000B6 | Closed State |
Closed State |
0x300000B7 | Open State |
Open State |
0x300000B8 | Connect State |
Connect State |
0x300000B9 | Listen State |
Listen State |
0x300000BA | Association State |
Association State |
0x300000BB | Authentication State |
Authentication State |
0x300000BC | Established State |
Established State |
0x300000BE | Success |
Success |
0x300000BF | Failure |
Failure |
0x300000C0 | Disconnect |
Disconnect |
0x300000CE | Restart |
Restart |
0x50000002 | Error |
Error |
0x50000003 | Warning |
Warning |
0x50000004 | Information |
Information |
0x70005DC0 | Connect to same network on resume |
Connect to same network on resume |
0x70005DC1 | Connect to network on resume after intervening disconnect |
Connect to network on resume after intervening disconnect |
0x70005DC2 | WLAN Connect to network |
WLAN Connect to network |
0x70005DCA | AcmConnection |
AcmConnection |
0x70005DCB | MsmAssociation |
MsmAssociation |
0x70005DCC | MsmSecurity |
MsmSecurity |
0x70005DCD | IhvSecurity |
IhvSecurity |
0x70005DCE | OneXAuthentication |
OneXAuthentication |
0x70005DCF | Start the device network |
Start the device network |
0x70005DD0 | Stop the device network |
Stop the device network |
0x70005DD1 | Authenticate the peers associated to the hosted network |
Authenticate the peers associated to the hosted network |
0x70005E24 | Connection Cost |
Connection Cost |
0x90000001 | Microsoft-Windows-WLAN-AutoConfig |
Microsoft-Windows-WLAN-AutoConfig |
0x90000002 | Microsoft-Windows-WLAN-AutoConfig/Operational |
Microsoft-Windows-WLAN-AutoConfig/Operational |
0x90000003 | System |
System |
0x90000004 | Microsoft-Windows-WLAN-AutoConfig/Diagnostic |
Microsoft-Windows-WLAN-AutoConfig/Diagnostic |
0xB0001F40 | WLAN AutoConfig service started a connection to a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%n |
WLAN AutoConfig service started a connection to a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%n |
0xB0001F41 | WLAN AutoConfig service has successfully connected to a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%nPHY Type: %7%nAuthentication: %8%nEncryption: %9%n802.1x Enabled: %10%nHidden: %12%n |
WLAN AutoConfig service has successfully connected to a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%nPHY Type: %7%nAuthentication: %8%nEncryption: %9%n802.1x Enabled: %10%nHidden: %12%n |
0xB0001F42 | WLAN AutoConfig service failed to connect to a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%nFailure Reason:%7%nRSSI: %10%n |
WLAN AutoConfig service failed to connect to a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%nFailure Reason:%7%nRSSI: %10%n |
0xB0001F43 | WLAN AutoConfig service has successfully disconnected from a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%nReason: %7%n |
WLAN AutoConfig service has successfully disconnected from a wireless network.%n%nNetwork Adapter: %2%nInterface GUID: %1%nConnection Mode: %3%nProfile Name: %4%nSSID: %5%nBSS Type: %6%nReason: %7%n |
0xB0001F44 | Wireless network is blocked due to connection failure.%n%nNetwork Adapter: %1%nInterface GUID: %2%nConnection Mode: %5%nProfile Name: %4%nSSID(s): %3%nBSS Type: %6%nFailure Reason:%7%nLength of block timer (minutes): %8%n |
Wireless network is blocked due to connection failure.%n%nNetwork Adapter: %1%nInterface GUID: %2%nConnection Mode: %5%nProfile Name: %4%nSSID(s): %3%nBSS Type: %6%nFailure Reason:%7%nLength of block timer (minutes): %8%n |
0xB0001F45 | WLAN AutoConfig service has begun starting the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
WLAN AutoConfig service has begun starting the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
0xB0001F46 | WLAN AutoConfig service has finished starting the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
WLAN AutoConfig service has finished starting the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
0xB0001F47 | WLAN AutoConfig service has failed to start the hosted network.%n%nError Code: %2%nError Message: %3%nInterface GUID: %1%nSSID: %4%n |
WLAN AutoConfig service has failed to start the hosted network.%n%nError Code: %2%nError Message: %3%nInterface GUID: %1%nSSID: %4%n |
0xB0001F48 | AutoConfig service has begun to stop the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
AutoConfig service has begun to stop the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
0xB0001F49 | WLAN AutoConfig service has finished stopping the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
WLAN AutoConfig service has finished stopping the hosted network.%n%nInterface GUID: %1%nSSID: %2%n |
0xB0001F4A | WLAN AutoConfig service has failed to stop the hosted network.%n%nError Code: %2%nError Message: %3%nInterface GUID: %1%nSSID: %4%n |
WLAN AutoConfig service has failed to stop the hosted network.%n%nError Code: %2%nError Message: %3%nInterface GUID: %1%nSSID: %4%n |
0xB0001F4B | Connect to last good network %n%nNetwork Adapter: %2%nInterface GUID: %1%n Profile Name: %3%nSSID: %4%nBSS type: %5%n |
Connect to last good network %n%nNetwork Adapter: %2%nInterface GUID: %1%n Profile Name: %3%nSSID: %4%nBSS type: %5%n |
0xB0001F4C | NLO discovery Network Adapter: Interface GUID: %1 %2 |
NLO discovery Network Adapter: Interface GUID: %1 %2 |
0xB0002AF8 | Wireless network association started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %7%n802.1X Enabled: %8%n |
Wireless network association started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %7%n802.1X Enabled: %8%n |
0xB0002AF9 | Wireless network association succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nManagement Frame Protection Enabled: %6%n |
Wireless network association succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nManagement Frame Protection Enabled: %6%n |
0xB0002AFA | Wireless network association failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nFailure Reason: %6%nDot11 Status Code: %8%nRSSI: %10%n |
Wireless network association failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nFailure Reason: %6%nDot11 Status Code: %8%nRSSI: %10%n |
0xB0002AFB | Wireless security started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %8%n802.1x Enabled: %10%n |
Wireless security started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %8%n802.1x Enabled: %10%n |
0xB0002AFC | Wireless security stopped.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nSecurity Hint: %6%n |
Wireless security stopped.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nSecurity Hint: %6%n |
0xB0002AFD | Wireless security succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%n |
Wireless security succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%n |
0xB0002AFE | Wireless security failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nPeer MAC Address: %6%nReason: %7%nError: %9%n |
Wireless security failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nPeer MAC Address: %6%nReason: %7%nError: %9%n |
0xB0002AFF | Wireless IHV security started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%n |
Wireless IHV security started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%n |
0xB0002B00 | Wireless IHV security succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%n |
Wireless IHV security succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%n |
0xB0002B01 | Wireless IHV security failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nPeer MAC Address: %6%nReason: %7%nAdditional Data Length: %8%n |
Wireless IHV security failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nPeer MAC Address: %6%nReason: %7%nAdditional Data Length: %8%n |
0xB0002B02 | Wireless security started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %8%nFIPS Mode: %10%n802.1x Enabled: %11%n |
Wireless security started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %8%nFIPS Mode: %10%n802.1x Enabled: %11%n |
0xB0002EEB | Wireless 802.1x authentication started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nEap Information: Type %6, Vendor ID %7, Vendor Type %8, Author ID %9%n |
Wireless 802.1x authentication started.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nEap Information: Type %6, Vendor ID %7, Vendor Type %8, Author ID %9%n |
0xB0002EEC | Wireless 802.1x authentication succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nIdentity: %6%nUser: %8%nDomain: %8%n |
Wireless 802.1x authentication succeeded.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nIdentity: %6%nUser: %8%nDomain: %8%n |
0xB0002EED | Wireless 802.1x authentication failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nPeer MAC Address: %6%nIdentity: %7%nUser: %8%nDomain: %9%nReason: %10%nError: %12%nEAP Reason: %13%nEAP Root cause String: %14%nEAP Error: %15%n |
Wireless 802.1x authentication failed.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nPeer MAC Address: %6%nIdentity: %7%nUser: %8%nDomain: %9%nReason: %10%nError: %12%nEAP Reason: %13%nEAP Root cause String: %14%nEAP Error: %15%n |
0xB0002EEE | Wireless 802.1x authentication was restarted.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nEap Information: Type %6, Vendor ID %7, Vendor Type %8, Author ID %9%nRestart Reason: %10%n |
Wireless 802.1x authentication was restarted.%n%nNetwork Adapter: %1%nInterface GUID: %2%nLocal MAC Address: %3%nNetwork SSID: %4%nBSS Type: %5%nEap Information: Type %6, Vendor ID %7, Vendor Type %8, Author ID %9%nRestart Reason: %10%n |
0xB00032C9 | A pre-logon connection was not attempted.%n%nResult: %1%nReason: %2%n |
A pre-logon connection was not attempted.%n%nResult: %1%nReason: %2%n |
0xB00032CA | A pre-logon connection was attempted.%n%nResult: %1%nInterface GUID: %2%nProfile Name: %3%nRequested Fields: %4%n |
A pre-logon connection was attempted.%n%nResult: %1%nInterface GUID: %2%nProfile Name: %3%nRequested Fields: %4%n |
0xB00032D3 | A post-logon connection was not attempted.%n%nResult: %1%nReason: %2%n |
A post-logon connection was not attempted.%n%nResult: %1%nReason: %2%n |
0xB00032D4 | A post-logon connection was attempted.%n%nResult: %1%nInterface GUID: %2%nProfile Name: %3%n |
A post-logon connection was attempted.%n%nResult: %1%nInterface GUID: %2%nProfile Name: %3%n |
0xB00032D5 | The post-logon connection attempt is complete.%n%nNetwork connection attempt result: %1%nReason: %2%nInterface GUID: %3%nProfile Name: %4%n |
The post-logon connection attempt is complete.%n%nNetwork connection attempt result: %1%nReason: %2%nInterface GUID: %3%nProfile Name: %4%n |
0xB000332C | %1 Cost is changed to %2 for profile %4 on interface %3 |
%1 Cost is changed to %2 for profile %4 on interface %3 |
0xB000332D | Group Policy Cost is changed to %1 |
Group Policy Cost is changed to %1 |
0xB000332E | %1 Cost is cleared for profile %3 on interface %2 |
%1 Cost is cleared for profile %3 on interface %2 |
0xB000332F | Group Policy Cost is cleared |
Group Policy Cost is cleared |
0xB00036B0 | Media notification received. Interface = %2, Connected = %3. |
Media notification received. Interface = %2, Connected = %3. |
0xB00036B1 | Peer notification received. Interface = %2, Joined = %3. |
Peer notification received. Interface = %2, Joined = %3. |
0xB00036B2 | Enable AutoConfig. Interface = %2, Enabled = %3. |
Enable AutoConfig. Interface = %2, Enabled = %3. |
0xB00036B3 | Set media streaming mode. Interface = %2, Enable = %3, Result = %4. |
Set media streaming mode. Interface = %2, Enable = %3, Result = %4. |
0xB00036B4 | Set BSS type. Interface = %2, BSS type = %3. |
Set BSS type. Interface = %2, BSS type = %3. |
0xB00036B5 | Set radio state. Interface = %2, PHY = %3, State = %4, Result = %5. |
Set radio state. Interface = %2, PHY = %3, State = %4, Result = %5. |
0xB00036B6 | Start auto config. Interface = %2. |
Start auto config. Interface = %2. |
0xB00036B7 | Stop auto config. Interface = %2. |
Stop auto config. Interface = %2. |
0xB00036B8 | Power setting = %3. Interface = %2. |
Power setting = %3. Interface = %2. |
0xB00036B9 | Change session to %3. Interface = %2. |
Change session to %3. Interface = %2. |
0xB00036BA | Radio is off. Interface = %2. |
Radio is off. Interface = %2. |
0xB00036BB | Change radio state for interface = %2 : PHY = %3, software state = %4, hardware state = %5) |
Change radio state for interface = %2 : PHY = %3, software state = %4, hardware state = %5) |
0xB00036BC | The connection is not healthy. Pending profile update is ignored. Interface = %2 |
The connection is not healthy. Pending profile update is ignored. Interface = %2 |
0xB00036BD | Profile %3 is updated. Interface = %2 |
Profile %3 is updated. Interface = %2 |
0xB00036BE | %3, need to disconnect. Interface = %2 |
%3, need to disconnect. Interface = %2 |
0xB00036BF | Set current operation mode. Interface = %2, OpMode = %3, Result = %4. |
Set current operation mode. Interface = %2, OpMode = %3, Result = %4. |
0xB00036C0 | Got connection request, mode = %3, flags = %4, profile name = %5, session = %6. Interface = %2 |
Got connection request, mode = %3, flags = %4, profile name = %5, session = %6. Interface = %2 |
0xB00036C1 | Connection cancelled by user. Interface = %2. |
Connection cancelled by user. Interface = %2. |
0xB00036C2 | Connection failed. Interface = %5, Reason code = %1. |
Connection failed. Interface = %5, Reason code = %1. |
0xB00036C3 | Stop all connection attempts for interface %2. |
Stop all connection attempts for interface %2. |
0xB00036C4 | Connection succeeded on interface %2. |
Connection succeeded on interface %2. |
0xB00036C5 | Connection complete on interface %2, session = %3, status = %4, ad hoc network formed = %5 |
Connection complete on interface %2, session = %3, status = %4, ad hoc network formed = %5 |
0xB00036C6 | Got disconnect request. Interface = %2. |
Got disconnect request. Interface = %2. |
0xB00036C7 | Set profile %3 to manual temporarily. |
Set profile %3 to manual temporarily. |
0xB00036C8 | Disconnecting. Interface = %2. |
Disconnecting. Interface = %2. |
0xB00036C9 | Interface %2 state is set to %3. |
Interface %2 state is set to %3. |
0xB00036CA | UI request for interface %2 result = %3. |
UI request for interface %2 result = %3. |
0xB00036CB | Profile %3 %4. |
Profile %3 %4. |
0xB00036CC | Profile name change. Interface = %2, old profile name = %3, new profile name = %4 |
Profile name change. Interface = %2, old profile name = %3, new profile name = %4 |
0xB00036CD | Interface %1 (%2) is successfully initialized. |
Interface %1 (%2) is successfully initialized. |
0xB00036CE | The current operation mode for interface %2 is %3. |
The current operation mode for interface %2 is %3. |
0xB00036CF | Interface %1 type = %2. |
Interface %1 type = %2. |
0xB00036D0 | Interface %4 cannot be queried, error %1. |
Interface %4 cannot be queried, error %1. |
0xB00036D1 | Failed to query physical medium for interface %1, because the device is not ready. Need to retry. |
Failed to query physical medium for interface %1, because the device is not ready. Need to retry. |
0xB00036D2 | Found name %2 for interface %1 |
Found name %2 for interface %1 |
0xB00036D3 | Network %1 is not permitted. |
Network %1 is not permitted. |
0xB00036D4 | Power setting = %1. |
Power setting = %1. |
0xB00036D5 | Disconnect the temporary connection %3 for interface %2, Reason = %4. |
Disconnect the temporary connection %3 for interface %2, Reason = %4. |
0xB00036D6 | Clear runtime state because the user who initiated the manual connection logged off. |
Clear runtime state because the user who initiated the manual connection logged off. |
0xB00036D7 | WTS session change. Type = %1, session id = %2. |
WTS session change. Type = %1, session id = %2. |
0xB00036D8 | Scan for networks. Interface = %2, scan type = %3, flush BSS list = %4 |
Scan for networks. Interface = %2, scan type = %3, flush BSS list = %4 |
0xB00036D9 | Scan request is ignored because radio is off. Interface = %2. |
Scan request is ignored because radio is off. Interface = %2. |
0xB00036DA | Scan results are not queried because raido is off. Interface = %2. |
Scan results are not queried because raido is off. Interface = %2. |
0xB00036DB | The scan state machine is stopped. |
The scan state machine is stopped. |
0xB00036DC | No auto switch for the current connection (%3). |
No auto switch for the current connection (%3). |
0xB00036DD | Connection (auto = %4) to %5 (multiple=%6) using profile %3. |
Connection (auto = %4) to %5 (multiple=%6) using profile %3. |
0xB00036DE | The session id=%1, active=%2, console=%3 is added. |
The session id=%1, active=%2, console=%3 is added. |
0xB00036DF | The state of session id=%1 is refreshed to active=%2, console=%3. |
The state of session id=%1 is refreshed to active=%2, console=%3. |
0xB00036E0 | Active Console User state = %1 |
Active Console User state = %1 |
0xB00036E1 | The session id=%1 is removed. |
The session id=%1 is removed. |
0xB00036E2 | Discovery module has taken care of the UI request. |
Discovery module has taken care of the UI request. |
0xB00036E3 | UI request not sent because the network is suppressed and the UI request is notification type. |
UI request not sent because the network is suppressed and the UI request is notification type. |
0xB00036E4 | IntfCompleteTimely failed, error %1 |
IntfCompleteTimely failed, error %1 |
0xB00036E5 | Session %1, Network suppressed status for %2 is %3. |
Session %1, Network suppressed status for %2 is %3. |
0xB00036E6 | Enable AutoConfig background scan. Interface = %2, Enabled = %3. |
Enable AutoConfig background scan. Interface = %2, Enabled = %3. |
0xB00036E7 | Discard this round of background scan because a connection process is in progress. Interface = %2 |
Discard this round of background scan because a connection process is in progress. Interface = %2 |
0xB00036E8 | Discard this round of background scan because the current connection does not allow auto switch. Interface = %2 |
Discard this round of background scan because the current connection does not allow auto switch. Interface = %2 |
0xB00036E9 | Discard this round of background scan because the current connection is the most preferred auto connection. Interface = %2 |
Discard this round of background scan because the current connection is the most preferred auto connection. Interface = %2 |
0xB00036EA | Connect to %2 with profile %1 |
Connect to %2 with profile %1 |
0xB00036EB | Set operational state. Interface = %2, Enabled = %3. |
Set operational state. Interface = %2, Enabled = %3. |
0xB00036EC | Profile State changed. Profile: %1 Blocked for %2 milliseconds (Single SSID: %3) |
Profile State changed. Profile: %1 Blocked for %2 milliseconds (Single SSID: %3) |
0xB00036ED | Profile State changed. Profile: %1 Update State: %2 (Single SSID: %3) |
Profile State changed. Profile: %1 Update State: %2 (Single SSID: %3) |
0xB00036EE | RpcCall %1 from client %2 |
RpcCall %1 from client %2 |
0xB00036EF | SetAutoConfigParameterRpcCall for %1 from process %2 |
SetAutoConfigParameterRpcCall for %1 from process %2 |
0xB00036F0 | SetInterfaceRpcCall for %1 from process %2 |
SetInterfaceRpcCall for %1 from process %2 |
0xB00036F1 | PrivateSetInterfaceRpcCall for %1 from process %2 on Interface %3 |
PrivateSetInterfaceRpcCall for %1 from process %2 on Interface %3 |
0xB00036F2 | InternalPrivateQuerySetInterfaceCall for %1 on Interface %2 |
InternalPrivateQuerySetInterfaceCall for %1 on Interface %2 |
0xB00036F3 | Screen Power State changed. Screen ON = %1 |
Screen Power State changed. Screen ON = %1 |
0xB00036F4 | Low Power State changed. Low Power = %1 |
Low Power State changed. Low Power = %1 |
0xB00036F5 | Adding WLAN Interface %1 for %2 |
Adding WLAN Interface %1 for %2 |
0xB00036F6 | Removing WLAN Interface Interface %1 |
Removing WLAN Interface Interface %1 |
0xB00036F7 | Expedited scan triggered on %1 because %2 |
Expedited scan triggered on %1 because %2 |
0xB00036F8 | Disconnect triggered on %1 Reason: %2 |
Disconnect triggered on %1 Reason: %2 |
0xB00036F9 | Limited Connectivity Recovery Type: %1 Event: %2 Data: %3 |
Limited Connectivity Recovery Type: %1 Event: %2 Data: %3 |
0xB00036FA | Gateway Reachability State changed. Interface GUID: %1 Reachable: %2 |
Gateway Reachability State changed. Interface GUID: %1 Reachable: %2 |
0xB0004E20 | Begin Connect API |
Begin Connect API |
0xB0004E21 | Begin Disconnect API |
Begin Disconnect API |
0xB0004E22 | Calling MSMSecPerformPreAssociateSecurity |
Calling MSMSecPerformPreAssociateSecurity |
0xB0004E23 | Calling MSMSecStopSecurity |
Calling MSMSecStopSecurity |
0xB0004E24 | Connect completion reason %1, session %2, adhoc formed %3 |
Connect completion reason %1, session %2, adhoc formed %3 |
0xB0004E25 | Received CONNECT COMPLETION, status %3, assocStatus %4 |
Received CONNECT COMPLETION, status %3, assocStatus %4 |
0xB0004E26 | FSM Current state %3, event %4 |
FSM Current state %3, event %4 |
0xB0004E27 | FSM Transition from State: %3 to State: %4 |
FSM Transition from State: %3 to State: %4 |
0xB0004E28 | Phy Type not compatible |
Phy Type not compatible |
0xB0004E29 | Link Quality: %3 |
Link Quality: %3 |
0xB0004E2A | Received IHV PORT DOWN, peer %3 |
Received IHV PORT DOWN, peer %3 |
0xB0004E2B | Received IHV PORT UP, peer %3 |
Received IHV PORT UP, peer %3 |
0xB0004E2C | Post Connect Security has Completed Successfully |
Post Connect Security has Completed Successfully |
0xB0004E2D | Post Connect Security has FAILED with reason code: %1 |
Post Connect Security has FAILED with reason code: %1 |
0xB0004E2E | Received Security Packet: %3 |
Received Security Packet: %3 |
0xB0004E2F | Security PreConnect Completion, security reason: %1, error %2 |
Security PreConnect Completion, security reason: %1, error %2 |
0xB0004E30 | Send Security Packet Length = %3 and Completion Handle = %4 |
Send Security Packet Length = %3 and Completion Handle = %4 |
0xB0004E32 | SSID = %3 BSSIDCount = %4 |
SSID = %3 BSSIDCount = %4 |
0xB0004E33 | A client has associated with the hosted network. %n%nInterface GUID: %1%nInterface description:%2%nNetwork SSID: %3%nLocal MAC address: %4%nPeer MAC address: %5%n |
A client has associated with the hosted network. %n%nInterface GUID: %1%nInterface description:%2%nNetwork SSID: %3%nLocal MAC address: %4%nPeer MAC address: %5%n |
0xB0004E34 | A client has successfully authenticated with the hosted network. %n%nInterface GUID: %1%nInterface description:%2%nNetwork SSID: %3%nLocal MAC address: %4%nPeer MAC address: %5%n |
A client has successfully authenticated with the hosted network. %n%nInterface GUID: %1%nInterface description:%2%nNetwork SSID: %3%nLocal MAC address: %4%nPeer MAC address: %5%n |
0xB0004E35 | A client has failed to authenticate with the hosted network. %n%nError code: %2%nError Message: %3%nInterface GUID: %1%nInterface description:%4%nNetwork SSID: %5%nLocal MAC address: %6%n |
A client has failed to authenticate with the hosted network. %n%nError code: %2%nError Message: %3%nInterface GUID: %1%nInterface description:%4%nNetwork SSID: %5%nLocal MAC address: %6%n |
0xB0004E36 | Begin Scan |
Begin Scan |
0xB0004E37 | Scan completion Status %2 |
Scan completion Status %2 |
0xB0004E38 | Number of Unique Wlan Networks %2 |
Number of Unique Wlan Networks %2 |
0xB0004E39 | Visible Network: %1, %2 BSSIDS, %3/%4, %5 RSSI |
Visible Network: %1, %2 BSSIDS, %3/%4, %5 RSSI |
0xB0005209 | Adapter(%2) New Adapter %4 (%5) |
Adapter(%2) New Adapter %4 (%5) |
0xB000520A | Adapter(%2) IntfSecState Transition %3 -- %4 |
Adapter(%2) IntfSecState Transition %3 -- %4 |
0xB000520B | Adapter(%2) Received StopSecurity |
Adapter(%2) Received StopSecurity |
0xB000520C | Pre-Associate Failure Auth %3, Cipher %4, OneX Enabled(%5), UICancelled(%6) |
Pre-Associate Failure Auth %3, Cipher %4, OneX Enabled(%5), UICancelled(%6) |
0xB000520D | Received MSMSec UI Response, but already have key material! |
Received MSMSec UI Response, but already have key material! |
0xB000520E | Received UI response %3 |
Received UI response %3 |
0xB000520F | TIMING OUT 802.1x Authentication |
TIMING OUT 802.1x Authentication |
0xB0005210 | NOT TIMING OUT 802.1x authentication, next timer in %6 msec |
NOT TIMING OUT 802.1x authentication, next timer in %6 msec |
0xB0005211 | 802.1x veto-ed FAST ROAMING (Error %1), performing full authentication |
802.1x veto-ed FAST ROAMING (Error %1), performing full authentication |
0xB0005212 | Port (%4) Peer %6 AuthMgr Transition %7 -- %8 |
Port (%4) Peer %6 AuthMgr Transition %7 -- %8 |
0xB0005213 | Sending UI response to 802.1x |
Sending UI response to 802.1x |
0xB0005214 | KeyExt Transition %2 -- %3 |
KeyExt Transition %2 -- %3 |
0xB0005215 | Explicit failure from 802.1x, (Reason %2, Error %3) |
Explicit failure from 802.1x, (Reason %2, Error %3) |
0xB0005216 | 802.1x success |
802.1x success |
0xB0005217 | Port(%4) Peer %6 KeyMgr transition %7 -- %8 |
Port(%4) Peer %6 KeyMgr transition %7 -- %8 |
0xB0005218 | Auth sent M1(%4), self %5, peer %6 |
Auth sent M1(%4), self %5, peer %6 |
0xB0005219 | Auth sent M3(%4), self %5, peer %6 |
Auth sent M3(%4), self %5, peer %6 |
0xB000521A | Auth sent G1(%4), self %5, peer %6 |
Auth sent G1(%4), self %5, peer %6 |
0xB000521B | Port(%4) Peer %6 KeyMgrAuth Transition %7 -- %8 |
Port(%4) Peer %6 KeyMgrAuth Transition %7 -- %8 |
0xB000521C | CONNECTION SECURED by OFFLOADED key exchange |
CONNECTION SECURED by OFFLOADED key exchange |
0xB000521D | Port(%4) Notify Key Exchange Status: Authenticator(%7) reason %8 , self %5, peer %6 |
Port(%4) Notify Key Exchange Status: Authenticator(%7) reason %8 , self %5, peer %6 |
0xB000521E | Default Key: Idx %1, Algo %2, Direction= %3, Len %4 |
Default Key: Idx %1, Algo %2, Direction= %3, Len %4 |
0xB000521F | Pairwise Key (%1): Algo %2, Direction= %3, Len %4 |
Pairwise Key (%1): Algo %2, Direction= %3, Len %4 |
0xB0005220 | Adapter(%1) Connect Completion, Reason %2, Error %3 |
Adapter(%1) Connect Completion, Reason %2, Error %3 |
0xB0005221 | Port(%1) Indicate Security Result, Peer %2, Reason %3 Error %4 |
Port(%1) Indicate Security Result, Peer %2, Reason %3 Error %4 |
0xB0005222 | Adapter(%4) Tx to %1, Ethertype %2, size %3 |
Adapter(%4) Tx to %1, Ethertype %2, size %3 |
0xB0005223 | Sending UI request to MSM (%1) |
Sending UI request to MSM (%1) |
0xB0005224 | Adapter(%2) MSM Connect notification, Network \"%4\" |
Adapter(%2) MSM Connect notification, Network \"%4\" |
0xB0005225 | Adapter(%2) MSM Disconnect notification |
Adapter(%2) MSM Disconnect notification |
0xB0005226 | Adapter(%2) Port up for peer %3 |
Adapter(%2) Port up for peer %3 |
0xB0005227 | Adapter(%2) Port down for peer %3 |
Adapter(%2) Port down for peer %3 |
0xB0005228 | Adapter(%2) Rx from %3, Ethertype %4, size %5 |
Adapter(%2) Rx from %3, Ethertype %4, size %5 |
0xB0005229 | Adapter(%2) UI Response, request type %3, response type %4, cancelled = %5 |
Adapter(%2) UI Response, request type %3, response type %4, cancelled = %5 |
0xB000522A | Adapter(%2) Create discovery profiles, SSID %3, BSS type %4, secure %5 |
Adapter(%2) Create discovery profiles, SSID %3, BSS type %4, secure %5 |
0xB000522B | Tx pkt completion, pkt %3 |
Tx pkt completion, pkt %3 |
0xB000522C | Adapter(%2) MSM Redo security request |
Adapter(%2) MSM Redo security request |
0xB000522D | Connection health status is %1 (%2), HealthyHint %3 |
Connection health status is %1 (%2), HealthyHint %3 |
0xB000522E | Transition network suspected |
Transition network suspected |
0xB000522F | UI Response - Valid = %1, Cancelled = %2 |
UI Response - Valid = %1, Cancelled = %2 |
0xB0005230 | Port(%3) MSMSendPacket failed, Error %1 |
Port(%3) MSMSendPacket failed, Error %1 |
0xB0005231 | Can't do fast roaming when PMK Cache is not valid |
Can't do fast roaming when PMK Cache is not valid |
0xB0005232 | PreAuthMgr Transition %4 -- %5 |
PreAuthMgr Transition %4 -- %5 |
0xB0005233 | PreAuth: 802.1X Success, Received keys by Pre-Authentication for %6 |
PreAuth: 802.1X Success, Received keys by Pre-Authentication for %6 |
0xB0005234 | PreAuth: Explicit failure from 802.1x, (Reason %2, Error %3) |
PreAuth: Explicit failure from 802.1x, (Reason %2, Error %3) |
0xB0005235 | PreAuth: 802.1x success |
PreAuth: 802.1x success |
0xB0005236 | Received unicast key material in EAPOL-Key (Rapid rekey %7) |
Received unicast key material in EAPOL-Key (Rapid rekey %7) |
0xB0005237 | CONNECTION SECURED by RC4 key exchange |
CONNECTION SECURED by RC4 key exchange |
0xB0005238 | CONNECTION SECURED by RSN key exchange |
CONNECTION SECURED by RSN key exchange |
0xB0005239 | RSN Key Receive: Key Message M1 |
RSN Key Receive: Key Message M1 |
0xB000523A | RSN Key Receive: Key Message M3 |
RSN Key Receive: Key Message M3 |
0xB000523B | RSN Key Receive: Key Message M2 |
RSN Key Receive: Key Message M2 |
0xB000523C | RSN Key Receive: Key Message M4 |
RSN Key Receive: Key Message M4 |
0xB000523D | RSN Key Receive: Key Message G1 |
RSN Key Receive: Key Message G1 |
0xB000523E | RSN Key Receive: Key Message G2 |
RSN Key Receive: Key Message G2 |
0xB000523F | FAST ROAMING is %1 |
FAST ROAMING is %1 |
0xB0005240 | Unknown transition into Failure, EventType %3 |
Unknown transition into Failure, EventType %3 |
0xB0005241 | Port(%4) Peer %6 SecMgr Transition %7 -- %8 |
Port(%4) Peer %6 SecMgr Transition %7 -- %8 |
0xB0005242 | CONNECTION SECURED by WPA key exchange |
CONNECTION SECURED by WPA key exchange |
0xB0005243 | WPA Key Receive: Key Message M1 |
WPA Key Receive: Key Message M1 |
0xB0005244 | WPA Key Receive: Key Message M3 |
WPA Key Receive: Key Message M3 |
0xB0005245 | WPA Key Receive: Key Message G1 |
WPA Key Receive: Key Message G1 |
0xB0005246 | Eapol Key packet cache OVERFLOW |
Eapol Key packet cache OVERFLOW |
0xB0005247 | PMK Cache overflowed, current %4, limit %5 |
PMK Cache overflowed, current %4, limit %5 |
0xB0005248 | WLAN Security Settings: BSS Type %1, Authentication %2, Encryption %3, OneX Enabled %4, Eap Information - Type %5, Vendor ID %6, Vendor Type %7, Author ID %8 |
WLAN Security Settings: BSS Type %1, Authentication %2, Encryption %3, OneX Enabled %4, Eap Information - Type %5, Vendor ID %6, Vendor Type %7, Author ID %8 |
0xB0005249 | Received multicast key material in EAPOL-Key (Rapid rekey %7) |
Received multicast key material in EAPOL-Key (Rapid rekey %7) |
0xB000524A | Default Key ID set to Index %1 |
Default Key ID set to Index %1 |
0xB0007530 | Connection started 1 |
Connection started 1 |
0xB0007531 | Connection timeout threshold reached 1 |
Connection timeout threshold reached 1 |
0xB0007532 | Connection succeeded |
Connection succeeded |
0xB0007533 | Connection started 2 |
Connection started 2 |
0xB0007534 | Connection timeout threshold reached 2 |
Connection timeout threshold reached 2 |
0xB0007535 | Connection started 3 |
Connection started 3 |
0xB0007536 | Connection timeout threshold reached 3 |
Connection timeout threshold reached 3 |
0xB0007537 | Manual connect initiated, end running reconnect scenarios |
Manual connect initiated, end running reconnect scenarios |
0xB000753A | UI interaction requested 1 |
UI interaction requested 1 |
0xB000753B | UI interaction requested 2 |
UI interaction requested 2 |
0xB000753C | UI interaction requested 3 |
UI interaction requested 3 |
0xB000753D | Connection succeeded - Hidden network 1 |
Connection succeeded - Hidden network 1 |
0xB000753E | Connection succeeded - Hidden network 2 |
Connection succeeded - Hidden network 2 |
0xB000753F | Connection succeeded - Hidden network 3 |
Connection succeeded - Hidden network 3 |
0xB0007540 | Selection list exhausted 1 |
Selection list exhausted 1 |
0xB0007541 | Selection list exhausted 2 |
Selection list exhausted 2 |
0xB0007542 | Selection list exhausted 3 |
Selection list exhausted 3 |
0xB0007543 | Connection succeeded to previous network - expected roaming |
Connection succeeded to previous network - expected roaming |
0xB0007598 | Cancel WLAN Resume-Reconnect Interface GUID: %1 |
Cancel WLAN Resume-Reconnect Interface GUID: %1 |
0xB0009C41 | Connect Diagnostic Information%nInterface GUID: %1%nNetwork Adapter: %2%nConnection Mode: %3%nSSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %7%n802.1X Enabled: %8%nIHV Bitmap: %9%nHidden: %10%nPeer MAC: %11%nWLAN Status Code: %12%nDot11 Status Code: %13%nAssoc Time: %14%nAssoc Restart Count: %15%nAuth Time: %16%nAuth Restart Count: %17%nDevice ID: %18%nDevice Manufacturer: %38%nDriver Service: %20%nDriver Version: %19%nDriver Date: %42%nRSSI: %21%nSignal Quality: %22%%%nChannel: %23%nInterfering AP Count: %24%nTotal Visible AP Count: %25%nMax AP Phy Type: %26%nMax AP Channel Width: %27%nAP Description: %28%nAP Manufacturer: %29%nAP Model Name: %30%nAP Model Number: %31%nDetailed Status On Roam: %32Rx Rate:%33%nTx Rate: %34%nEAP Type: %35%n802.1x Auth Mode: %36%nHotSpot 2.0: %37%nProfile Type %39%nSystem MAC Randomization: %40%nProfile MAC Randomization: %41%n |
Connect Diagnostic Information%nInterface GUID: %1%nNetwork Adapter: %2%nConnection Mode: %3%nSSID: %4%nBSS Type: %5%nAuthentication: %6%nEncryption: %7%n802.1X Enabled: %8%nIHV Bitmap: %9%nHidden: %10%nPeer MAC: %11%nWLAN Status Code: %12%nDot11 Status Code: %13%nAssoc Time: %14%nAssoc Restart Count: %15%nAuth Time: %16%nAuth Restart Count: %17%nDevice ID: %18%nDevice Manufacturer: %38%nDriver Service: %20%nDriver Version: %19%nDriver Date: %42%nRSSI: %21%nSignal Quality: %22%%%nChannel: %23%nInterfering AP Count: %24%nTotal Visible AP Count: %25%nMax AP Phy Type: %26%nMax AP Channel Width: %27%nAP Description: %28%nAP Manufacturer: %29%nAP Model Name: %30%nAP Model Number: %31%nDetailed Status On Roam: %32Rx Rate:%33%nTx Rate: %34%nEAP Type: %35%n802.1x Auth Mode: %36%nHotSpot 2.0: %37%nProfile Type %39%nSystem MAC Randomization: %40%nProfile MAC Randomization: %41%n |
0xB0009C42 | Limited Recovery Diagnostic Statistics%nInterface GUID: %1%nDisconnect Extensions: %2%nRoam Extensions: %3%nSuspect Duration: %4 ms%nBssid Changed: %5%nDetection Link Quality: %6%nCurrent Link Quality: %7%nMacTxUnicastCount: %8%nMacRxUnicastCount: %9%nMacRxMulticastCount: %10%nMacRxUnicastDecryptSuccess: %11%nMacRxUnicastDecryptFailure: %12%nPhyTxFailedCount: %13%nPhyTxFrameCount: %14%nPhyTxRetryCount: %15%nPhyRxFrameCount: %16%nPhyRxFcsErrorCount: %17%nCurrent Tx Rate: %18%nCurrent Rx Rate:%19%n |
Limited Recovery Diagnostic Statistics%nInterface GUID: %1%nDisconnect Extensions: %2%nRoam Extensions: %3%nSuspect Duration: %4 ms%nBssid Changed: %5%nDetection Link Quality: %6%nCurrent Link Quality: %7%nMacTxUnicastCount: %8%nMacRxUnicastCount: %9%nMacRxMulticastCount: %10%nMacRxUnicastDecryptSuccess: %11%nMacRxUnicastDecryptFailure: %12%nPhyTxFailedCount: %13%nPhyTxFrameCount: %14%nPhyTxRetryCount: %15%nPhyRxFrameCount: %16%nPhyRxFcsErrorCount: %17%nCurrent Tx Rate: %18%nCurrent Rx Rate:%19%n |
0xB0009C43 | Diagnostic Statistics Difference%nInterface GUID: %1%nEvent: %2%nMacTxUnicastCount: %3%nMacRxUnicastCount: %4%nMacRxMulticastCount: %5%nMacRxUnicastDecryptSuccess: %6%nMacRxUnicastDecryptFailure: %7%nPhyTxFailedCount: %8%nPhyTxFrameCount: %9%nPhyTxRetryCount: %10%nPhyRxFrameCount: %11%nPhyRxFcsErrorCount: %12%nTimeDiffMs: %13%n |
Diagnostic Statistics Difference%nInterface GUID: %1%nEvent: %2%nMacTxUnicastCount: %3%nMacRxUnicastCount: %4%nMacRxMulticastCount: %5%nMacRxUnicastDecryptSuccess: %6%nMacRxUnicastDecryptFailure: %7%nPhyTxFailedCount: %8%nPhyTxFrameCount: %9%nPhyTxRetryCount: %10%nPhyRxFrameCount: %11%nPhyRxFcsErrorCount: %12%nTimeDiffMs: %13%n |
0xB000EA61 | Error: %1 Location: %2 Context: %3 |
Error: %1 Location: %2 Context: %3 |
0xB000EA62 | Warning: %1 Location: %2 Context: %3 |
Warning: %1 Location: %2 Context: %3 |
0xB000EA63 | Transitioned to State: %1 Context: %2 |
Transitioned to State: %1 Context: %2 |
0xB000EA64 | Updated Context: %1 Update Reason: %2 |
Updated Context: %1 Update Reason: %2 |
0xB000EAC5 | SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6 |
SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6 |
0xB000EAC7 | Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4 |
Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4 |
0xD0000003 | The operational criteria were not met. |
The operational criteria were not met. |
0xD0000004 | The operational criteria were met. |
The operational criteria were met. |
0xD0000005 | The machine was not joined to a domain. |
The machine was not joined to a domain. |
0xD0000006 | There are no pre-logon networks within visible range. |
There are no pre-logon networks within visible range. |
0xD0000007 | The pre-logon profile is marked for manual connection only. |
The pre-logon profile is marked for manual connection only. |
0xD0000008 | The pre-logon profile does not use user credentials for authentication. |
The pre-logon profile does not use user credentials for authentication. |
0xD0000009 | The configured EAP Method does not support single sign on operations. |
The configured EAP Method does not support single sign on operations. |
0xD000000A | The configured EAP method has identified the profile as incapable of pre-logon. |
The configured EAP method has identified the profile as incapable of pre-logon. |
0xD000000F | Success. |
Success. |
0xD0000010 | Failed to establish a network connection within the allotted time. |
Failed to establish a network connection within the allotted time. |
0xD0000011 | Failed to establish a network connection. |
Failed to establish a network connection. |
0xD0000012 | Failed to contact a domain controller within the allotted time. |
Failed to contact a domain controller within the allotted time. |
0xD0000013 | Failed to contact a domain controller and obtain a TCP/IP address within the allotted time. |
Failed to contact a domain controller and obtain a TCP/IP address within the allotted time. |
0xD0000015 | There are no post-logon networks within visible range. |
There are no post-logon networks within visible range. |
0xD0000016 | The post-logon profile is marked for manual connection only. |
The post-logon profile is marked for manual connection only. |
0xD0000017 | The post-logon profile does not use user credentials for authentication. |
The post-logon profile does not use user credentials for authentication. |
0xD0000019 | The configured EAP method has identified the profile as incapable of post-logon. |
The configured EAP method has identified the profile as incapable of post-logon. |
0xD000001A | No |
No |
0xD000001B | Yes |
Yes |
0xD0000020 | An unspecified EAP error has occurred. |
An unspecified EAP error has occurred. |
0xD0000021 | Smart card Reader not present |
Smart card Reader not present |
0xD0000022 | No Smard card present |
No Smard card present |
0xD0000023 | Disabled |
Disabled |
0xD0000024 | Enabled |
Enabled |
0xD0000025 | infrastructure |
infrastructure |
0xD0000026 | independent |
independent |
0xD0000027 | any |
any |
0xD0000028 | unknown |
unknown |
0xD0000029 | on |
on |
0xD000002A | off |
off |
0xD000002B | no_saving |
no_saving |
0xD000002C | low_saving |
low_saving |
0xD000002D | medium_saving |
medium_saving |
0xD000002E | maximum_saving |
maximum_saving |
0xD000002F | invalid |
invalid |
0xD0000030 | GP-only is enforced on the current connection |
GP-only is enforced on the current connection |
0xD0000031 | The auto connection flag is cleared for the current connection |
The auto connection flag is cleared for the current connection |
0xD0000032 | The connection setting of the current profile has changed |
The connection setting of the current profile has changed |
0xD0000033 | Unknown |
Unknown |
0xD0000034 | Station |
Station |
0xD0000035 | AP |
AP |
0xD0000036 | Extensible Station |
Extensible Station |
0xD0000037 | Network Monitor |
Network Monitor |
0xD0000038 | Device |
Device |
0xD0000039 | Group Owner |
Group Owner |
0xD000003A | Client |
Client |
0xD000003B | profile |
profile |
0xD000003C | temporary profile |
temporary profile |
0xD000003D | discovery (secure) |
discovery (secure) |
0xD000003E | discovery (unsecure) |
discovery (unsecure) |
0xD000003F | auto |
auto |
0xD0000041 | not ready |
not ready |
0xD0000042 | connected |
connected |
0xD0000043 | ad hoc network formed |
ad hoc network formed |
0xD0000044 | disconnecting |
disconnecting |
0xD0000045 | disconnected |
disconnected |
0xD0000046 | associating |
associating |
0xD0000047 | discovering |
discovering |
0xD0000048 | authenticating |
authenticating |
0xD0000049 | is updated |
is updated |
0xD000004A | will be updated after health check |
will be updated after health check |
0xD000004B | not updated because the connection is not healthy |
not updated because the connection is not healthy |
0xD000004C | The active console session who initiated the connection becomes non active console session. |
The active console session who initiated the connection becomes non active console session. |
0xD000004D | The user who initiated the connection logged off |
The user who initiated the connection logged off |
0xD000004E | PORT_UP |
PORT_UP |
0xD000004F | PORT_DOWN |
PORT_DOWN |
0xD0000050 | PACKET |
PACKET |
0xD0000051 | DISCONNECT |
DISCONNECT |
0xD0000052 | IHV |
IHV |
0xD0000053 | TKIPMIC_FAILURE |
TKIPMIC_FAILURE |
0xD0000054 | PMKID_CANDIDATE_LIST |
PMKID_CANDIDATE_LIST |
0xD0000055 | PHY_STATE_CHANGE |
PHY_STATE_CHANGE |
0xD0000056 | LINK_QUALITY |
LINK_QUALITY |
0xD0000057 | CONNECT_COMPLETION |
CONNECT_COMPLETION |
0xD0000058 | 4_WAY_START |
4_WAY_START |
0xD0000059 | 4_WAY_COMPLETION |
4_WAY_COMPLETION |
0xD000005A | PSK_MISMATCH |
PSK_MISMATCH |
0xD000005B | PHY_FREQUENCY_ADOPTED |
PHY_FREQUENCY_ADOPTED |
0xD000005C | EXTAP_PORT_UP |
EXTAP_PORT_UP |
0xD000005D | EXTAP_PORT_DOWN |
EXTAP_PORT_DOWN |
0xD000005E | Disconnected |
Disconnected |
0xD000005F | Configuring |
Configuring |
0xD0000060 | Associating |
Associating |
0xD0000061 | Wait_For_Portup |
Wait_For_Portup |
0xD0000062 | Authenticating |
Authenticating |
0xD0000063 | Roaming |
Roaming |
0xD0000064 | Connected |
Connected |
0xD0000065 | Wait_For_Disconnected |
Wait_For_Disconnected |
0xD0000066 | Ihv_Configuring |
Ihv_Configuring |
0xD0000067 | Reset |
Reset |
0xD0000068 | AP_Disconnected |
AP_Disconnected |
0xD0000069 | AP_Reset_For_Connect |
AP_Reset_For_Connect |
0xD000006A | AP_Configuring |
AP_Configuring |
0xD000006B | AP_Started |
AP_Started |
0xD000006C | AP_Stopping |
AP_Stopping |
0xD000006D | AP_Reset_For_Disconnect |
AP_Reset_For_Disconnect |
0xD000006E | Cmd_Connect |
Cmd_Connect |
0xD000006F | Cmd_Disconnect |
Cmd_Disconnect |
0xD0000070 | Upcall_Association_Success |
Upcall_Association_Success |
0xD0000071 | Upcall_Association_Failure |
Upcall_Association_Failure |
0xD0000072 | Upcall_Port_Up |
Upcall_Port_Up |
0xD0000073 | IHV_Port_Up |
IHV_Port_Up |
0xD0000074 | Upcall_Port_Down |
Upcall_Port_Down |
0xD0000075 | IHV_Port_Down |
IHV_Port_Down |
0xD0000076 | Upcall_Disconnect |
Upcall_Disconnect |
0xD0000077 | IHV_Disconnect |
IHV_Disconnect |
0xD0000078 | Pre_Security_Success |
Pre_Security_Success |
0xD0000079 | IHV_Pre_Security_Success |
IHV_Pre_Security_Success |
0xD000007A | Pre_Security_Failure |
Pre_Security_Failure |
0xD000007B | IHV_Pre_Security_Failure |
IHV_Pre_Security_Failure |
0xD000007C | Post_Security_Success |
Post_Security_Success |
0xD000007D | IHV_Post_Security_Success |
IHV_Post_Security_Success |
0xD000007E | Post_Security_Failure |
Post_Security_Failure |
0xD000007F | IHV_Post_Security_Failure |
IHV_Post_Security_Failure |
0xD0000080 | Timeout |
Timeout |
0xD0000081 | Force_Disconnect |
Force_Disconnect |
0xD0000082 | Reset_Success |
Reset_Success |
0xD0000083 | Reset_Failure |
Reset_Failure |
0xD0000084 | INITIALIZED |
INITIALIZED |
0xD0000085 | PROCESSING_PREASSOCIATE |
PROCESSING_PREASSOCIATE |
0xD0000086 | PREASSOCIATE_DONE |
PREASSOCIATE_DONE |
0xD0000087 | STOPPING_SECURITY |
STOPPING_SECURITY |
0xD0000088 | PROCESSING_POSTASSOCIATE |
PROCESSING_POSTASSOCIATE |
0xD0000089 | PROCESSING_STOP_POSTASSOCIATE |
PROCESSING_STOP_POSTASSOCIATE |
0xD000008A | WAIT_FOR_UI_RESPONSE |
WAIT_FOR_UI_RESPONSE |
0xD000008B | FAILURE |
FAILURE |
0xD000008C | Open |
Open |
0xD000008D | Shared Key |
Shared Key |
0xD000008E | WPA |
WPA |
0xD000008F | WPA PSK |
WPA PSK |
0xD0000090 | WPA None |
WPA None |
0xD0000091 | RSNA |
RSNA |
0xD0000092 | RSNA PSK |
RSNA PSK |
0xD0000093 | NONE |
NONE |
0xD0000094 | WEP40 |
WEP40 |
0xD0000095 | TKIP |
TKIP |
0xD0000096 | CCMP |
CCMP |
0xD0000097 | WEP104 |
WEP104 |
0xD0000098 | USE_GROUP |
USE_GROUP |
0xD0000099 | WEP |
WEP |
0xD000009A | key |
key |
0xD000009B | passphrase |
passphrase |
0xD000009C | psk |
psk |
0xD000009D | onex |
onex |
0xD00000A0 | autoconfig |
autoconfig |
0xD00000A1 | msm |
msm |
0xD00000A2 | security |
security |
0xD00000A3 | ihv |
ihv |
0xD00000A4 | verifynet |
verifynet |
0xD00000A5 | cancelled |
cancelled |
0xD00000A7 | DISABLED |
DISABLED |
0xD00000A8 | FAKE_AUTH |
FAKE_AUTH |
0xD00000A9 | ENABLED |
ENABLED |
0xD00000AA | DEACTIVATE |
DEACTIVATE |
0xD00000AB | FORCE_AUTHENTICATED |
FORCE_AUTHENTICATED |
0xD00000AC | START_AUTH |
START_AUTH |
0xD00000AD | AUTHENTICATING |
AUTHENTICATING |
0xD00000AE | AUTHENTICATIONSUCCESS |
AUTHENTICATIONSUCCESS |
0xD00000AF | AUTHENTICATED |
AUTHENTICATED |
0xD00000B0 | AUTH_FAILED |
AUTH_FAILED |
0xD00000B2 | STOP_AUTH |
STOP_AUTH |
0xD00000B7 | INACTIVE |
INACTIVE |
0xD00000B8 | UNDERWAY |
UNDERWAY |
0xD00000B9 | SUCCESS |
SUCCESS |
0xD00000BC | PHS1 |
PHS1 |
0xD00000BD | PHS2 |
PHS2 |
0xD00000BF | GHS |
GHS |
0xD00000C1 | Inbound |
Inbound |
0xD00000C2 | Outbound |
Outbound |
0xD00000C3 | Both |
Both |
0xD00000C5 | INITIALIZE_PROFILE |
INITIALIZE_PROFILE |
0xD00000C7 | ACTIVATED |
ACTIVATED |
0xD00000C8 | PREAUTH_STARTED |
PREAUTH_STARTED |
0xD00000C9 | PREAUTH_IN_PROGRESS |
PREAUTH_IN_PROGRESS |
0xD00000CA | PROCESS_ONEX_RESULT |
PROCESS_ONEX_RESULT |
0xD00000CB | PROCESS_TIMEOUT |
PROCESS_TIMEOUT |
0xD00000CD | ACTIVE |
ACTIVE |
0xD00000CF | WAIT_FOR_AUTH_SUCCESS |
WAIT_FOR_AUTH_SUCCESS |
0xD00000D0 | REVIVE_CACHE |
REVIVE_CACHE |
0xD00000D1 | KEY_ACTIVATE |
KEY_ACTIVATE |
0xD00000D2 | WAIT_FOR_KEY_SUCCESS |
WAIT_FOR_KEY_SUCCESS |
0xD00000D5 | KEY_DEACTIVATE |
KEY_DEACTIVATE |
0xD00000D8 | WAIT_FOR_KEY_START |
WAIT_FOR_KEY_START |
0xD00000D9 | ROAM_AUTHENTICATE |
ROAM_AUTHENTICATE |
0xD00000DA | Group Policy |
Group Policy |
0xD00000DB | User |
User |
0xD00000DC | Public |
Public |
0xD00000DD | Operator |
Operator |
0xD00000DE | UnBlocked |
UnBlocked |
0xD00000DF | Conservatively UnBlocked |
Conservatively UnBlocked |
0xD00000E0 | Failed |
Failed |
0xD00000E1 | UnFailed |
UnFailed |
0xD00000E2 | Marked Temp Manual |
Marked Temp Manual |
0xD00000E4 | Deleted |
Deleted |
0xD00000E5 | CS NLO Delayed due to Excessive Roam |
CS NLO Delayed due to Excessive Roam |
0xD00000E6 | CS NLO Delayed due to Excessive Connect |
CS NLO Delayed due to Excessive Connect |
0xD00000E7 | InternalScan |
InternalScan |
0xD00000E8 | Scan |
Scan |
0xD00000E9 | Connect |
Connect |
0xD00000EB | SetProfile |
SetProfile |
0xD00000EC | DeleteProfile |
DeleteProfile |
0xD00000ED | RenameProfile |
RenameProfile |
0xD00000EE | SetProfileList |
SetProfileList |
0xD00000EF | SetFilterList |
SetFilterList |
0xD00000F0 | WcmSetProfile |
WcmSetProfile |
0xD00000F1 | WcmDisconnect |
WcmDisconnect |
0xD00000F2 | Bss Type Changed |
Bss Type Changed |
0xD00000F3 | Radio State Changed |
Radio State Changed |
0xD00000F4 | Profile Changed |
Profile Changed |
0xD00000F5 | OpMode Changed |
OpMode Changed |
0xD00000F6 | Hotspot2 registration enabled |
Hotspot2 registration enabled |
0xD00000F7 | AuthenticationAborted |
AuthenticationAborted |
0xD00000F8 | AssociationFailure |
AssociationFailure |
0xD00000F9 | AuthenticationFailure |
AuthenticationFailure |
0xD00000FA | NCSICapabilityChange |
NCSICapabilityChange |
0xD00000FB | ACM Disconnect API called |
ACM Disconnect API called |
0xD00000FC | Not Allowed by Updated Token |
Not Allowed by Updated Token |
0xD00000FD | Temporary Disconnect Requested |
Temporary Disconnect Requested |
0xD00000FE | Auto Connect Not Allowed by Token |
Auto Connect Not Allowed by Token |
0xD00000FF | Manual Connect Not Allowed by Token |
Manual Connect Not Allowed by Token |
0xD0000100 | Limited Connectivity Recovery |
Limited Connectivity Recovery |
0xD0000101 | None |
None |
0xD0000102 | Roam |
Roam |
0xD0000103 | Reset Recovery |
Reset Recovery |
0xD0000104 | Disable Enable |
Disable Enable |
0xD0000106 | Temporary Disconnect |
Temporary Disconnect |
0xD0000107 | Gateway Unreachability Roam |
Gateway Unreachability Roam |
0xD0000108 | Considered |
Considered |
0xD0000109 | Disabled In Registry |
Disabled In Registry |
0xD000010A | Disabled Non-WDI Driver |
Disabled Non-WDI Driver |
0xD000010B | Throttled Frequent Retries |
Throttled Frequent Retries |
0xD000010C | Requested |
Requested |
0xD000010D | Completed |
Completed |
0xD000010E | Generic Failure |
Generic Failure |
0xD000010F | Skipped Disallowed State |
Skipped Disallowed State |
0xDB000003 | discovery-secure |
discovery-secure |
0xDB000004 | discovery-unsecure |
discovery-unsecure |
0xDB000006 | wcn |
wcn |
0xDB000007 | auto-resume |
auto-resume |
0xDB000008 | auto-resume (instantconnect) |
auto-resume (instantconnect) |
0xDB000009 | nlo-aoac-screenoff |
nlo-aoac-screenoff |
0xDB00000A | auto-nlo |
auto-nlo |
0xDB00000B | roam |
roam |
0xDB00000C | roam-resume |
roam-resume |
0xDB00000D | roam-aoac-screenoff |
roam-aoac-screenoff |
0xF0000001 | Unrestricted |
Unrestricted |
0xF0000002 | Fixed |
Fixed |
0xF0000003 | Variable |
Variable |
0xF0000004 | Over Data Limit |
Over Data Limit |
0xF0000005 | Congested |
Congested |