NetNat.dll.mui Windows NAT WMI Provider ca2a8e5eb3ba272a9012a7d23ca5b518

File info

File name: NetNat.dll.mui
Size: 20480 byte
MD5: ca2a8e5eb3ba272a9012a7d23ca5b518
SHA1: 2f0b6582b8af68effd3d6d63b41c88708ded939a
SHA256: 74e51a79a824f1af384490c4e9b6d8802f05e085c77f45dbfe671d2f59b8bcc0
Operating systems: Windows 10
Extension: MUI

Translations messages and strings

If an error occurred or the following message in Portuguese language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id Portuguese English
1InstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below.
To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If not null and the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
If not set to null for DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
InstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below.
To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If not null and the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
If not set to null for DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
2The Caption property is a short textual description (one- line string) of the object. The Caption property is a short textual description (one- line string) of the object.
3The Description property provides a textual description of the object. The Description property provides a textual description of the object.
4A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.
Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.
A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.
Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.
52.19.0 2.19.0
6ManagedElement is an abstract class that provides a common superclass (or top of the inheritance tree) for the non-association classes in the CIM Schema. ManagedElement is an abstract class that provides a common superclass (or top of the inheritance tree) for the non-association classes in the CIM Schema.
7Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
For DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
For DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
8The user-friendly name for this instance of SettingData. In addition, the user-friendly name can be used as an index property for a search or query. (Note: The name does not have to be unique within a namespace.) The user-friendly name for this instance of SettingData. In addition, the user-friendly name can be used as an index property for a search or query. (Note: The name does not have to be unique within a namespace.)
9CIM_SettingData is used to represent configuration and and operational parameters for CIM_ManagedElement instances. There are a number of different uses of CIM_SettingData supported in the model today. Additional uses may be defined in the future.
Instances of CIM_SettingData may represent Aspects of a CIM_ManagedElement instance. This is modeled using the CIM_SettingsDefineState association. CIM_SettingData may be used to define capabilities when associated to an instance of CIM_Capabilities through the CIM_SettingsDefineCapabilities association.
Instances of CIM_SettingData may represent different types of configurations for a CIM_ManagedElement, including persistent configurations, in progress configuration changes, or requested configurations. The CIM_ElementSettingData association is used to model the relationship between a CIM_SettingData instance and the CIM_ManagedElement for which it is a configuration.
When an instance of CIM_SettingData represents a configuration, the current operational values for the parameters of the element are reflected by properties in the Element itself or by properties in its associations. These properties do not have to be the same values that are present in the SettingData object. For example, a modem might have a SettingData baud rate of 56Kb/sec but be operating at 19.2Kb/sec.
Note: The CIM_SettingData class is very similar to CIM_Setting, yet both classes are present in the model because many implementations have successfully used CIM_Setting. However, issues have arisen that could not be resolved without defining a new class. Therefore, until a new major release occurs, both classes will exist in the model. Refer to the Core White Paper for additional information. SettingData instances can be aggregated together into higher- level SettingData objects using ConcreteComponent associations.
CIM_SettingData is used to represent configuration and and operational parameters for CIM_ManagedElement instances. There are a number of different uses of CIM_SettingData supported in the model today. Additional uses may be defined in the future.
Instances of CIM_SettingData may represent Aspects of a CIM_ManagedElement instance. This is modeled using the CIM_SettingsDefineState association. CIM_SettingData may be used to define capabilities when associated to an instance of CIM_Capabilities through the CIM_SettingsDefineCapabilities association.
Instances of CIM_SettingData may represent different types of configurations for a CIM_ManagedElement, including persistent configurations, in progress configuration changes, or requested configurations. The CIM_ElementSettingData association is used to model the relationship between a CIM_SettingData instance and the CIM_ManagedElement for which it is a configuration.
When an instance of CIM_SettingData represents a configuration, the current operational values for the parameters of the element are reflected by properties in the Element itself or by properties in its associations. These properties do not have to be the same values that are present in the SettingData object. For example, a modem might have a SettingData baud rate of 56Kb/sec but be operating at 19.2Kb/sec.
Note: The CIM_SettingData class is very similar to CIM_Setting, yet both classes are present in the model because many implementations have successfully used CIM_Setting. However, issues have arisen that could not be resolved without defining a new class. Therefore, until a new major release occurs, both classes will exist in the model. Refer to the Core White Paper for additional information. SettingData instances can be aggregated together into higher- level SettingData objects using ConcreteComponent associations.
10Superclass SettingData for networking Superclass SettingData for networking
11Name of this instance of NAT Name of this instance of NAT
12Store in which this NAT instance object is stored Store in which this NAT instance object is stored
13Local Local
14Cluster Cluster
15Address Prefix of external interface Address Prefix of external interface
16Routing domain ID of internal interface (GUID) Routing domain ID of internal interface (GUID)
17Icmp Query Timeout Icmp Query Timeout
18Session Timeout for an established TCP connection Session Timeout for an established TCP connection
19Session Timeout for a transient TCP connection Session Timeout for a transient TCP connection
20TCP filtering behavior TCP filtering behavior
21EndpointIndepedentFiltering EndpointIndepedentFiltering
22AddressDependentFiltering AddressDependentFiltering
23UDP filtering behavior UDP filtering behavior
24Session Timeout for idle UDP Session Timeout for idle UDP
25Inbound UDP Refresh Inbound UDP Refresh
26Indicates if this instance is active Indicates if this instance is active
27Address Prefix of internal interface Address Prefix of internal interface
28Configuration settings for Nat Configuration settings for Nat
29Identifier for ExternalAddress Identifier for ExternalAddress
30Name of NAT to which this address belongs Name of NAT to which this address belongs
31IP Address IP Address
32Start port specifying the beginning of the port range Start port specifying the beginning of the port range
33End port specifying the end of the port range End port specifying the end of the port range
34Configuration settings for NAT External Address Configuration settings for NAT External Address
35Identifier for Static Mapping Identifier for Static Mapping
36Name of NAT to which this mapping belongs Name of NAT to which this mapping belongs
37Protocol Protocol
38TCP TCP
39UDP UDP
40Remote address based on which the mapping is chosen Remote address based on which the mapping is chosen
41External IP address External IP address
42External Port External Port
43Internal IP address Internal IP address
44Internal Port Internal Port
45Routing domain ID of internal interface Routing domain ID of internal interface
46Configuration settings for NAT static mapping Configuration settings for NAT static mapping
47Internal Source Address Internal Source Address
48Internal Source Port Internal Source Port
49Internal Destination Address Internal Destination Address
50Internal Destination Port Internal Destination Port
51External Source Address External Source Address
52External Source Port External Source Port
53External Destination Address External Destination Address
54External Destination Port External Destination Port
55Name of NAT to which this session belongs Name of NAT to which this session belongs
56Creation time of the session Creation time of the session
57Nat Sessions Nat Sessions
58Hairpinning mode between different routing domains Hairpinning mode between different routing domains
59External External
60Global configuration settings for NAT Global configuration settings for NAT
0x1Can not find the required property %1 Can not find the required property %1
0x2%1 cannot contain a semicolon %1 cannot contain a semicolon
0x3Failed to start WinNAT service Failed to start WinNAT service
0x4Property %1 is read-only Property %1 is read-only
0x5Performing operation %1 on Target %2 Performing operation %1 on Target %2
0x6Performing operation %1 on Target %2 PolicyStore %3 Performing operation %1 on Target %2 PolicyStore %3
0x7Invalid parameter %1 Invalid parameter %1
0x8Invalid parameter %1 %2 Invalid parameter %1 %2
0x9Instance %1 %2 not found Instance %1 %2 not found
0xAInconsistent parameters, Nat Instance's InternalRDID should be * if InternalRDID is to be specified in mapping. Inconsistent parameters, Nat Instance's InternalRDID should be * if InternalRDID is to be specified in mapping.
0xBDeleting IP Address %1 failed, Try deleting the address using Remove-NetIPAddress. Deleting IP Address %1 failed, Try deleting the address using Remove-NetIPAddress.
0xCDeleting a NAT instance which is managed by cluster is not supported. Remove the instance using Remove-ClusterResource. Deleting a NAT instance which is managed by cluster is not supported. Remove the instance using Remove-ClusterResource.
0xDPortEnd must be greater than or equal to PortStart. PortEnd must be greater than or equal to PortStart.
0xENo matching interface was found for prefix %1. No matching interface was found for prefix %1.
0xFThe external IP address %1 and port number %2!hu! for the static mapping does not match an existing ExternalAddress' IP address or port range. Use Add-NetNatExternalAddress to add an ExternalAddress. The external IP address %1 and port number %2!hu! for the static mapping does not match an existing ExternalAddress' IP address or port range. Use Add-NetNatExternalAddress to add an ExternalAddress.
0x10The port range (%2!hu! - %3!hu!) for the new ExternalAddress %1 overlaps with the port range of an existing ExternalAddress. The port range (%2!hu! - %3!hu!) for the new ExternalAddress %1 overlaps with the port range of an existing ExternalAddress.
0x11No matching compartment was found for InternalRoutingDomainId %1. No matching compartment was found for InternalRoutingDomainId %1.
0x12IPV6 is not supported. IPV6 is not supported.
0x13Invalid prefix length in ExternalAddressPrefix %1. Invalid prefix length in ExternalAddressPrefix %1.

EXIF

File Name:NetNat.dll.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-n..2provider.resources_31bf3856ad364e35_10.0.15063.0_pt-pt_24d6f61f99ba4144\
File Size:20 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:19968
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Dynamic link library
File Subtype:0
Language Code:Portuguese
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:Windows NAT WMI Provider
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:NetNat.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:NetNat.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0

What is NetNat.dll.mui?

NetNat.dll.mui is Multilingual User Interface resource file that contain Portuguese language for file NetNat.dll (Windows NAT WMI Provider).

File version info

File Description:Windows NAT WMI Provider
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:NetNat.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:NetNat.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x816, 1200