0x1 | 作業失敗 (%3、%4、%5、%6)。%n%1%nHResult: %2 |
An operation has failed (%3, %4, %5, %6).%n%1%nHResult: %2 |
0x2 | 作業失敗 (%3、%4、%5、%6)。%n%1%nWin32Error: %2 |
An operation has failed (%3, %4, %5, %6).%n%1%nWin32Error: %2 |
0x3 | 作業失敗 (%3、%4、%5、%6)。%n%1%nNTStatus: %2 |
An operation has failed (%3, %4, %5, %6).%n%1%nNTStatus: %2 |
0x4 | 無法配置物件。%n物件: %1%n大小: %2 |
Failed to allocate object.%nObject: %1%nSize: %2 |
0x5 | 非預期的大小。%n物件: %1%n預期大小: %2%n實際大小: %3 |
Unexpected size.%nObject: %1%nExpected Size: %2%nActual Size: %3 |
0x6 | 資料無效。%n名稱: %1%n值: %2 |
Invalid data.%nName: %1%nValue: %2 |
0x7 | 裝置回應包含錯誤狀態。%n狀態: %1 |
Device responded with an error status.%nStatus: %1 |
0x8 | 不正確的裝置。%n裝置: %1%n原因: %2 |
Bad device.%nDevice: %1%nReason: %2 |
0x9 | 不支援這個功能。%n功能: %1%n內容: %2 |
The function is not supported.%nFunction: %1%nContext: %2 |
0xA | 要求[%1](CLS=%2,INS=%3,P1=%4,P2=%5,Lc=%6,Le=%7,.NETServiceMethod=%8) |
Request[%1](CLS=%2,INS=%3,P1=%4,P2=%5,Lc=%6,Le=%7,.NETServiceMethod=%8) |
0xB | 要求已傳回失敗。%nMsgType: %1%nICCStatus: %2%nCmdStatus: %3%nError: %4%nSW1: %5%nSW2: %6 |
A Request has returned failure.%nMsgType: %1%nICCStatus: %2%nCmdStatus: %3%nError: %4%nSW1: %5%nSW2: %6 |
0xC | 裝置在 %2 毫秒內產生 %1 個未知的插斷。%n最新的未知插斷訊息: %3。 |
The device generated %1 unknown interrupt(s) in %2 ms.%nLast Unknown Interrupt Message: %3. |
0x64 | 發生下列偵錯資訊事件 (%2、%3、%4、%5)。%n%1 |
The following debug informational event has occurred (%2, %3, %4, %5).%n%1 |
0x65 | 發生下列偵錯警告事件 (%2、%3、%4、%5)。%n%1 |
The following debug warning event has occurred (%2, %3, %4, %5).%n%1 |
0x66 | 發生下列偵錯錯誤事件 (%2、%3、%4、%5)。%n%1 |
The following debug error event has occurred (%2, %3, %4, %5).%n%1 |
0x67 | 智慧卡讀取裝置報告下列類別描述項。 |
The Smartcard reader reported the following class descriptor. |
0x68 | 智慧卡讀取裝置報告下列類別描述項 (第一部分)。 |
The Smartcard reader reported the following class descriptor (part 1). |
0x69 | 智慧卡讀取裝置報告下列類別描述項 (第二部分)。 |
The Smartcard reader reported the following class descriptor (part 2). |
0x6A | 智慧卡讀取裝置報告的類別描述項值無效。 |
The Smartcard reader reported an invalid class descriptor value. |
0x3000000A | 一般 |
General |
0x3000000B | 初始化 |
Init |
0x3000000C | Pnp |
Pnp |
0x3000000D | 電源 |
Power |
0x3000000E | IoRequest |
IoRequest |
0x3000000F | Ioctl |
Ioctl |
0x30000010 | IoQueue |
IoQueue |
0x30000011 | ClassExt |
ClassExt |
0x50000002 | 錯誤 |
Error |
0x50000003 | 警告 |
Warning |
0x50000004 | 資訊 |
Information |
0x70000001 | 驅動程式 |
Driver |
0x90000001 | Microsoft-Windows-USB-CCID |
Microsoft-Windows-USB-CCID |
0x90000002 | 系統 |
System |
0xF0000001 | 5.0V |
5.0V |
0xF0000002 | 3.0V |
3.0V |
0xF0000003 | 1.8V |
1.8V |
0xF0000004 | T0 |
T0 |
0xF0000005 | T1 |
T1 |
0xF0000006 | 2-wire |
2-wire |
0xF0000007 | 3-wire |
3-wire |
0xF0000008 | I2C |
I2C |
0xF0000009 | 接受卡 |
Card accept |
0xF000000A | 退出卡 |
Card eject |
0xF000000B | 擷取卡 |
Card capture |
0xF000000C | 鎖定/解除鎖定卡 |
Card lock/unlock |
0xF000000D | 以 ATR 為基礎的自動參數 |
Auto parameter based on ATR |
0xF000000E | 自動 ICC 啟用 |
Auto ICC activation |
0xF000000F | 自動 ICC 電壓 |
Auto ICC voltage |
0xF0000010 | 自動 ICC 時鐘 |
Auto ICC clock |
0xF0000011 | 自動傳輸速率 |
Auto baud rate |
0xF0000012 | 自動參數交涉 |
Auto parameters negotiation |
0xF0000013 | 自動 PPS |
Auto PPS |
0xF0000014 | 可在時鐘停止模式下設定 ICC |
Can set ICC in clock stop mode |
0xF0000015 | 接受非零 NAD 值 |
Non-zero NAD value accepted |
0xF0000016 | 自動 IFSD 交換 |
Auto IFSD exchange |
0xF0000017 | TPDU 層交換 |
TPDU level exchange |
0xF0000018 | 短式 APDU 層交換 |
Short APDU level exchange |
0xF0000019 | 短式和延伸 APDU 層交換 |
Short and Extended APDU level exchange |
0xF000001A | 支援選擇性暫停 |
Support selective suspend |
0xF000001B | 支援 PIN 驗證 |
PIN Verification supported |
0xF000001C | 支援 PIN 修改 |
PIN Modification supported |