| File name: | wlangpui.dll.mui |
| Size: | 30208 byte |
| MD5: | c476d9b6c73da335451085d24e63bfe1 |
| SHA1: | 35a87bc3630e97ad196d5d30c73156962c49581b |
| SHA256: | 16d156899f2999465ab3eed814fbdb9eecf637c91add78d9eb4ec1b3cbfe5cdf |
| Operating systems: | Windows 10 |
| Extension: | MUI |
If an error occurred or the following message in Chinese (Traditional) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.
| id | Chinese (Traditional) | English |
|---|---|---|
| 1 | 建立和編輯無線原則 | Create and edit Wireless policies |
| 2 | 無線網路原則管理 | Wireless Network Policy Management |
| 3 | 大小 (從 IDS_SIZE) | Size (from IDS_SIZE) |
| 4 | 類型 (從 IDS_TYPE) | Type (from IDS_TYPE) |
| 5 | MS-CHAPv2 | MS-CHAPv2 |
| 6 | 無線網路原則系統管理。管理 IEEE 802.11 網路用戶端的 WLAN 自動設定設定值和 IEEE 802.1X 安全性設定 | Wireless Network Policy Administration. Manage WLAN AutoConfig settings and IEEE 802.1X Security Settings for IEEE 802.11 Network clients |
| 7 | 1.0 | 1.0 |
| 8 | Microsoft Corporation | Microsoft Corporation |
| 9 | PEAP | PEAP |
| 12 | 網路名稱 (SSID) | Network name (SSID) |
| 13 | 驗證 | Authentication |
| 14 | 加密 | Encryption |
| 15 | 取消選取此方塊後，Windows 將不會控制無線區域網路。如此就不會在網域用戶端上設定任何無線區域網路連線及安全性設定，而且目前原則中的任何此類設定都將會遺失。 | By unchecking this box, Windows will not control wireless LAN. Consequently no wireless LAN connection and security settings will be configured on the domain clients, and any such settings in the current policy will be lost. |
| 16 | 臨機操作 | Ad hoc |
| 17 | 基礎結構 | Infrastructure |
| 18 | 允許 | Allow |
| 19 | 拒絕 | Deny |
| 20 | 權限 | Permission |
| 21 | 開啟 | Open |
| 22 | 分享 | Shared |
| 23 | WPA-Enterprise | WPA-Enterprise |
| 24 | 您確定嗎? | Are you sure? |
| 25 | WPA-Personal | WPA-Personal |
| 26 | 已停用 | Disabled |
| 27 | WPA2-Enterprise | WPA2-Enterprise |
| 28 | WPA2-Personal | WPA2-Personal |
| 29 | 開放 (搭配 802.1X) | Open with 802.1X |
| 30 | 指定的連接埠必須在 0 到 65535 之間。 | Specified port must be between 0 and 65535. |
| 32 | TKIP | TKIP |
| 33 | AES-CCMP | AES-CCMP |
| 34 | WEP | WEP |
| 35 | 當移除無線網路原則資料時，產生以下錯誤。 %1 |
The following error occurred when removing wireless network policy data. %1 |
| 36 | 存取權限不足，無法儲存。您必須擁有系統管理員權限。 資料可能已經遺失。(錯誤 = %1!lx!) |
Failed to save due to insufficient access rights. You must have administrator privileges. Data may have been lost. (Error = %1!lx!) |
| 37 | 新的權限項目 | New Permission Entry |
| 38 | 編輯權限項目 | Edit Permission Entry |
| 39 | 設定檔名稱 | Profile Name |
| 40 | SSID | SSID |
| 41 | AES-GCMP | AES-GCMP |
| 53 | 是 | Yes |
| 54 | 否 | No |
| 60 | ，與原則存放區 | , with policy storage |
| 61 | 無法開啟無線網路原則存放區。您的網域中找不到網域控制站。 | The wireless network policy storage failed to open. No Domain controller can be found for your domain. |
| 62 | 無法開啟無線網路原則存放區。無法和 Active Directory 溝通。 | The wireless network policy storage failed to open. Could not communicate with the Active Directory. |
| 63 | 無法建立無線網路原則存放區。您可能沒有系統管理存取權。 | The wireless network policy storage creation failed. You might not have administrative access rights. |
| 64 | 由於不足的存取權，無法開啟無線網路原則存放區。您必須是系統管理員。 | The wireless network policy storage could not be opened due to insufficient access rights. You must be an administrator. |
| 65 | 無法開啟無線網路原則存放區。產生以下錯誤: %1 |
The wireless network policy storage could not be opened. The following error occurred: %1 |
| 66 | 類型 | Type |
| 69 | 名稱 | Name |
| 70 | 描述 | Description |
| 74 | 建立無線網路原則(&C)... | &Create Wireless Network Policy... |
| 75 | 建立無線網路原則 | Create a Wireless Network Policy |
| 78 | 匯入原則(&I)... | &Import Policies... |
| 79 | 從檔案匯入原則資訊 | Imports policy information from a file |
| 86 | 無效 | Invalid |
| 93 | IEEE 802.1X | IEEE 802.1X |
| 104 | ||
| 107 | 已指派原則 | Policy Assigned |
| 108 | GPO 名稱 | GPO Name |
| 109 | 優先順序 | Precedence |
| 110 | OU | OU |
| 116 | 無線網路 (IEEE 802.11) 原則 | Wireless Network (IEEE 802.11) Policies |
| 117 | Active Directory | Active Directory |
| 118 | XP | XP |
| 119 | Vista and Later Releases | Vista and Later Releases |
| 142 | 已指派，但「無線服務」服務未處於執行狀態 | Assigned, but the 'Wireless Service' service is not in a running state |
| 143 | 已指派，但 Active Directory 原則正在覆蓋中 | Assigned, but Active Directory policy is overriding |
| 176 | 請選取這個嵌入式管理單元所要管理的電腦或網域 | Select which computer or domain this snap-in will manage |
| 200 | 主控台儲存時，位置也會一起儲存 | When this console is saved the location will also be saved |
| 259 | 您必須輸入網域名稱。 | You must enter a domain name. |
| 260 | 嘗試指派一個還原預設原則時，發生錯誤。您必須以手動方式指定所要指派的原則。 | An error occurred attempting to Assign a restored default policy. You must specify the assigned policy manually. |
| 261 | 更新無線網路原則時出錯。原則可能已經刪除或是遺失資料存放區的連線。(錯誤 = %1!lx!) | There was error in refreshing wireless network policy. The policy may have been deleted or the connection to the data store may have been lost. (Error = %1!lx!) |
| 267 | 網路類型 | Network type |
| 287 | 原則名稱不可以是空白的 | Policy Name Cannot be empty |
| 289 | 與原則存放區的網路連線已經中斷。請關閉所有已經開啟 的對話方塊。您要立即嘗試重新連線嗎? |
The network connection to policy storage has been lost. Close all open dialogs. Attempt to reconnect now? |
| 601 | %1 (%2) | %1 (%2) |
| 605 | 已啟用 | Enabled |
| 609 | 臨機操作網路 | Ad Hoc Network |
| 610 | 存取點為基礎 | Access Point Based |
| 611 | 編輯 %1 | Edit %1 |
| 1133 | 將 XP 原則移轉至 Vista 原則 | Migrate XP policy to Vista policy |
| 1134 | 群組原則會封鎖設定檔中定義的 (%s, %s) 配對。 | The (%s, %s) pair defined in the profile is blocked by GP. |
| 1136 | 設定檔清單中有此網路存在且無法被刪除。 | This network exists in the profile list and can't be deleted. |
| 1137 | 請先選取一個項目，然後編輯它! | Select one item first and then edit it! |
| 1138 | 設定檔清單中有此網路存在且無法被編輯。 | This network exists in the profile list and can't be edited. |
| 1139 | 設定檔清單中有此網路存在且無法被封鎖。 | This network exists in the profile list and can't be blocked. |
| 1142 | 移轉的無線網路原則 | Migrated Wireless Network Policy |
| 1152 | 這個原則包含一或多個使用未安裝在這台電腦上的 EAP 方法設定的設定檔。這些設定檔已略過。如果您儲存此原則，這些設定檔的資料都會遺失。 | This policy has one or more profiles configured with EAP method(s) not installed on this machine. Those profiles have been skipped. If you save this policy, the data for those profiles will be lost. |
| 1153 | Windows 偵測到這個原則是由更新的 Windows 版本所建立。 您將無法在這個版本的 Windows 上編輯這個原則。 |
Windows has detected that this policy was created by a more recent version of Windows. You will not be able to edit this policy on this version of Windows. |
| 1155 | Windows 偵測到這個設定檔是由更新的 Windows 版本所建立。 您將無法在這個版本的 Windows 上匯入這個原則。 |
Windows has detected that this profile was created by a more recent version of Windows. You will not be able to import this profile on this version of Windows. |
| 3000 | 無法解讀 DNS 名稱 '%1'。請指定一個正確的 DNS 名稱。 | Failed to resolve the DNS name '%1'. Please specify a valid DNS name. |
| 3001 | 找到的 DNS 名稱 '%1' 的來源 IP 位址: %2。 |
Source IP addresses found for DNS name '%1': %2. |
| 3002 | 找到的 DNS 名稱 '%1' 的目的 IP 位址: %2。 |
Destination IP addresses found for DNS name '%1': %2. |
| 3004 | , | , |
| 3005 | 記憶體不足。 | Out of memory. |
| 3006 | 原則名稱不能是空的。 | The policy name cannot be empty. |
| 3007 | 工作階段的數目不正確。請輸入一個介於 %1 到 %2 之間的整數。 | The number of sessions is invalid. Please enter an integer between %1 and %2. |
| 5001 | 儲存無線資料時產生以下錯誤: %1 |
The following error occurred when saving Wireless data: %1 |
| 5002 | 載入無線資料時產生以下錯誤: %1 |
The following error occurred when loading Wireless data: %1 |
| 5003 | 因為下列錯誤操作失敗。 %1 |
The operation failed due to the following error. %1 |
| 5004 | 新增無線資料時產生以下錯誤 | Error Occured during Adding Wireless Data |
| 5006 | TLS | TLS |
| 5007 | MD5-Challenge | MD5-Challenge |
| 5008 | 智慧卡 | Smart card |
| 5009 | 電腦憑證 | Certificate on computer |
| 5010 | 使用者驗證 | User authentication |
| 5011 | 使用者或電腦驗證 | User or Computer authentication |
| 5012 | 僅有電腦 | Computer only |
| 5013 | 不可傳輸 | Do not transmit |
| 5014 | 傳輸 | Transmit |
| 5015 | 每一 IEEE 802.1X 傳輸 | Transmit per IEEE 802.1x |
| 5016 | 任何可用的網路 (偏好是存取點) | Any available network (access point preferred) |
| 5017 | 只給存取點 (基礎結構) 的網路 | Access point (infrastructure) networks only |
| 5018 | 只給電腦到電腦 (ad hoc) 的網路 | Computer-to-computer (ad hoc) networks only |
| 5019 | 無線網路原則名稱 | Wireless Network Policy Name |
| 5020 | 請為這個無線網路原則輸入名稱和簡短描述。 | Type a name and a brief description for this wireless network policy. |
| 5021 | 新的 XP 無線網路原則 | New XP Wireless Network Policy |
| 5022 | NEWSSID | NEWSSID |
| 5023 | 抱歉! 網路名稱 (SSID) 已經存在。 | Sorry, Network Name (SSID) already exists. |
| 5024 | 顯示慣用網路時發生錯誤。 | There was an error in displaying the Preferred Networks |
| 5025 | SSID 名稱不可以空白 | SSID Name Cannot be empty |
| 5027 | 新增慣用設定 | New Preferred Setting |
| 5028 | 範例描述 | Sample Description |
| 5029 | 新的無線網路原則 | New Wireless Network Policy |
| 5030 | 新增設定檔 | New Profile |
| 5100 | 建立適用於 Windows Vista 與更新版本的新無線網路原則 | Create A New Wireless Network Policy for Windows Vista and Later Releases |
| 5101 | 建立新的 Windows XP 原則 | Create A New Windows XP Policy |
| 5102 | 建立新的 Windows Vista 無線群組原則 | Create a new Windows Vista wireless group policy |
| 5103 | 建立新的 Windows XP 無線群組原則 | Create a new Windows XP wireless group policy |
| 5200 | 設定檔名稱重複，請再試一次! | Duplicated profile name, Try again! |
| 5201 | 網路名稱重複，請再試一次! | Duplicated network name, Try again! |
| 5202 | IHV | IHV |
| 5204 | 指定的目錄服務屬性不存在。可能需要更新版的 Active Directory 結構描述。 | The specified directory service attribute does not exist. A newer version of the Active Directory Schema may be required. |
| 6201 | 未知 | Unknown |
| 6212 | WPA | WPA |
| 6214 | WPA-PSK | WPA-PSK |
| 6216 | WPA-None | WPA-None |
| 6221 | WPA2 | WPA2 |
| 6222 | WPA2-PSK | WPA2-PSK |
| 6235 | 不要篩選結果 | Do not filter results |
| 6236 | Windows Vista 用戶端的篩選器 | Filter for Windows Vista Client |
| 6237 | Windows XP 用戶端的篩選器 | Filter for Windows XP client |
| 6243 | 編輯(&E)... | &Edit... |
| 6244 | 檢視(&V)... | &View... |
| 6245 | (*.xml)|*.xml|所有檔案 (*.*)|*.*|| | (*.xml)|*.xml|All Files (*.*)|*.*|| |
| 6246 | 匯入設定檔 | Import a profile |
| 6247 | 匯入設定檔失敗。錯誤碼是 %ld | Import profile failed. Error code is %ld |
| 6249 | 另存匯出的設定檔 ... | Save exported profile as ... |
| 6250 | 匯出設定檔失敗，錯誤碼是: %ld | Export profile failed with error Code: %ld |
| 6251 | 理由代碼與理由表格不符! | The reason code does not match reason table! |
| 6252 | 操作失敗 (錯誤=%ld)。 | The operation has failed (Error=%ld). |
| 6253 | 從 XP 原則移轉至 Vista 原則失敗。 | Migration from XP policy to Vista policy failed. |
| 6254 | 網路金鑰已從此設定檔移除。 | The Network Key has been removed from this profile. |
| 6255 | 從 XP 原則移轉到 Vista 原則成功。 但是，轉換下列設定檔失敗。 %1 |
Migration from XP policy to Vista policy succeeded. However, converting the following profiles failed. %1 |
| 6256 | 儲存 Vista 原則成功。 然而，儲存下列設定檔到原則失敗。 %1 |
Saving the Vista policy succeeded. However, saving the following profiles in the policy failed. %1 |
| 8193 | 操作成功。 | The operation was successful. |
| 8194 | 失敗，原因不明。 | Failed for an unknown reason. |
| 12289 | 無線網路不相容。 | The wireless network is not compatible. |
| 12290 | 無線網路的設定檔不相容。 | The profile for the wireless network is not compatible. |
| 14337 | 設定檔未設為自動連線。 | The profile is not set to connect automatically. |
| 14338 | 看不見無線網路。 | The wireless network is not visible. |
| 14339 | 無線網路被群組原則封鎖。 | The wireless network is blocked by the group policy. |
| 14340 | 無線網路被使用者封鎖。 | The wireless network is blocked by the user. |
| 14341 | 這個無線介面卡不允許 BSS 類型。 | The BSS type is not allowed on this wireless adapter. |
| 14342 | 該無線網路列於失敗清單上。 | The wireless network is on the failed list. |
| 14343 | 該無線網路列於封鎖清單上。 | The wireless network is on the blocked list. |
| 14344 | SSID 清單的大小超過介面卡能支援的大小上限。 | The size of the SSID list exceeds the maximum size supported by the adapter. |
| 14345 | MSM 連線呼叫失敗。 | The MSM connect call failed. |
| 14346 | MSM 掃描呼叫失敗。 | The MSM scan call failed. |
| 14347 | 無法使用指定的網路。 | The specific network is not available. |
| 14348 | 用來連線的設定檔已經變更或刪除。 | The profile used for the connection has changed or been deleted. |
| 14349 | 網路的密碼可能不正確。 | The password for the network might not be correct. |
| 14350 | 未收到需要由使用者提供的資訊。 | The information required from the user was not received. |
| 14351 | 舊版的用戶端不能使用存取點設定檔。 | Access Point profile is not allowed for old version client. |
| 14352 | 使用者或群組原則不能使用存取點設定檔。 | Access Point profile is not allowed by user or group policy. |
| 16385 | 根據結構描述，該設定檔無效。 | The profile is invalid according to the schema. |
| 16386 | WLAN 設定檔元素遺失。 | The WLAN profile element is missing. |
| 16387 | 設定檔的名稱無效。 | The name of the profile is invalid. |
| 16388 | 設定檔的類型無效。 | The type of the profile is invalid. |
| 16389 | PHY 類型無效。 | The PHY type is invalid. |
| 16390 | MSM 安全性設定遺失。 | The MSM security settings are missing. |
| 16391 | 未支援 IHV 安全性設定。 | The IHV security settings are not supported. |
| 16392 | IHV 設定檔 OUI 不符合介面卡 OUI。 | The IHV profile OUI did not match with the adapter OUI. |
| 16393 | IHV OUI 設定遺失。 | The IHV OUI settings are missing. |
| 16394 | IHV 安全性設定遺失。 | The IHV security settings are missing. |
| 16395 | 設定檔中有 Microsoft 和 IHV 安全性設定。 | Both Microsoft and IHV security settings exist in the profile. |
| 16396 | 設定檔中沒有安全性設定。 | No security settings exist in the profile. |
| 16397 | BSS 類型無效。 | The BSS type is not valid. |
| 16398 | 無法為臨機操作網路設定自動連線。 | Automatic connection cannot be set for an ad hoc network. |
| 16399 | 無法為臨機操作網路設定非廣播。 | Non-broadcast cannot be set for an ad hoc network. |
| 16400 | 無法為臨機操作網路設定自動切換。 | Auto-switch cannot be set for an ad hoc network. |
| 16401 | 無法為手動連線設定檔設定自動切換。 | Auto-switch cannot be set for a manual connection profile. |
| 16402 | IHV 安全性的 1X 設定遺失。 | 1X setting is missing for IHV security. |
| 16403 | 設定檔中的 SSID 無效或遺失。 | The SSID in the profile is invalid or missing. |
| 16404 | 設定檔中指定太多 SSID。 | Too many SSIDs specified in a profile. |
| 16417 | 不支援 IHV 連線設定。 | The IHV connectivity settings are not supported. |
| 16433 | 用戶端最大數目不是存取點模式中的有效值。 | The maximum number of clients is not a valid value in Access Point mode. |
| 16434 | 指定的通道無效。 | The specified channel is not valid. |
| 16435 | 驅動程式不支援該作業模式。 | The operation mode is not supported by the driver. |
| 16436 | AP 設定檔不應設定自動連線或自動切換。 | Auto-connect or auto-switch should not be set for an AP profile. |
| 16437 | 不允許自動連線。 | Automatic connection is not allowed. |
| 17300 | 錯誤 | Error |
| 18216 | 電腦驗證 | Computer authentication |
| 18217 | 來賓驗證 | Guest authentication |
| 18225 | %s - 內容 | %s properties |
| 18230 | SSID 已由 GP 封鎖 | SSID is blocked by GP |
| 18231 | SSID 已定義 | SSID is already defined |
| 18232 | 設定檔名稱不能空白 | Profile Name cannot be empty |
| 18233 | Windows 無法儲存此設定檔，因為它是不正確的。 | Windows cannot save this profile as it is invalid. |
| 18237 | 請指定至少一個網路名稱 (SSID) | Please specify at least one Network Name (SSID) |
| 18238 | 請指定有效的網路名稱 (SSID) | Please specify a valid Network Name (SSID) |
| 20481 | 作業系統未支援安全性設定。 | The security settings are not supported by the operating system. |
| 20482 | 未支援安全性設定。 | The security settings are not supported. |
| 20483 | BSS 類型不符。 | The BSS type does not match. |
| 20484 | PHY 類型不符。 | The PHY type does not match. |
| 20485 | 資料速率不符。 | The data rate does not match. |
| 22529 | 操作已取消。 | The operation was cancelled. |
| 22530 | 驅動程式在關聯時中斷連線。 | The driver disconnected while associating. |
| 22531 | 使用網路關聯時逾時。 | Association with the network timed out. |
| 22532 | 預先關聯安全性失敗。 | Pre-association security failed. |
| 22533 | 關聯後無法啟動安全性。 | Failed to start security after association. |
| 22534 | 安全性失敗。 | Security failed. |
| 22535 | 安全性作業逾時。 | Security operation times out. |
| 22536 | 驅動程式在漫遊時中斷連線。 | The driver disconnected while roaming. |
| 22537 | 無法啟動安全性進行漫遊。 | Failed to start security for roaming. |
| 22538 | 無法對臨機操作同儕節點啟動安全性。 | Failed to start security for Ad hoc peer. |
| 22539 | 驅動程式中斷連線。 | The driver disconnected. |
| 22540 | 驅動程式無法執行某些作業。 | The driver failed to perform some operations. |
| 22541 | IHV 服務無法使用。 | The IHV service is not available. |
| 22542 | IHV 服務逾時。 | The IHV service timed out. |
| 22543 | 驅動程式中斷連線逾時。 | The driver disconnect timed out. |
| 22544 | 內部失敗導致操作無法完成。 | An internal failure prevented the operation from completing. |
| 22545 | UI 要求逾時。 | The UI Request timed out. |
| 22546 | 電腦漫遊的頻率太高。數次嘗試之後仍然無法完成安全性檢查。 | The computer is roaming too often. The security check did not complete after several attempts. |
| 22547 | 無法啟動驅動程式作為存取點。 | The driver failed to start as Access Point. |
| 24577 | 無法佇列 UI 要求 | Failed to queue UI request |
| 24578 | 802.1x 驗證未在設定的時間內開始 | 802.1x authentication did not start within configured time |
| 24579 | 802.1x 驗證未在設定的時間內完成 | 802.1x authentication did not complete within configured time |
| 24580 | 動態金鑰交換未在設定的時間內開始 | Dynamic key exchange did not start within configured time |
| 24581 | 動態金鑰交換未在設定的時間內成功 | Dynamic key exchange did not succeed within configured time |
| 24582 | 四向交握的訊息 3 沒有金鑰資料 (RSN/WPA) | Message 3 of 4 way handshake has no key data (RSN/WPA) |
| 24583 | 四向交握的訊息 3 沒有 IE (RSN/WPA) | Message 3 of 4 way handshake has no IE (RSN/WPA) |
| 24584 | 四向交握的訊息 3 沒有群組金鑰 (RSN) | Message 3 of 4 way handshake has no Group Key (RSN) |
| 24585 | 在 M3 中配對 IE 的安全性效能失敗 (RSN/WPA) | Matching security capabilities of IE in M3 failed (RSN/WPA) |
| 24586 | 在 M3 中配對次要 IE 的安全性效能失敗 (RSN) | Matching security capabilities of Secondary IE in M3 failed (RSN) |
| 24587 | 需要配對金鑰，但 AP 只設定群組金鑰 | Required a pairwise key but AP configured only group keys |
| 24588 | 群組金鑰交握的訊息 1 沒有金鑰資料 (RSN/WPA) | Message 1 of group key handshake has no key data (RSN/WPA) |
| 24589 | 群組金鑰交握的訊息 1 沒有群組金鑰 | Message 1 of group key handshake has no group key |
| 24590 | AP 會在連線確定安全後，重設安全位元 | AP reset secure bit after connection was secured |
| 24591 | 802.1x 指出沒有驗證器，但設定檔需要 802.1x。 | 802.1x indicated there is no authenticator, but the profile requires 802.1x. |
| 24592 | 將設定連接至 NIC 失敗 | Plumbing settings to NIC failed |
| 24593 | 呼叫者已取消作業 | Operation was cancelled by caller |
| 24594 | 指定的金鑰索引無效 | Key index specified is not valid |
| 24595 | 需要金鑰，但提供的是 PSK | Key required, PSK present |
| 24596 | 無效的金鑰長度 | Invalid key length |
| 24597 | 無效的 PSK 長度 | Invalid PSK length |
| 24598 | 未指定驗證/加密編譯 | No auth/cipher specified |
| 24599 | 指定太多驗證/加密編譯 | Too many auth/cipher specified |
| 24600 | 設定檔包含重複的驗證/加密編譯 | Profile contains duplicate auth/cipher |
| 24601 | 設定檔原始資料無效 (1x 或金鑰資料) | Profile raw data is invalid (1x or key data) |
| 24602 | 驗證/加密編譯的組合無效 | Invalid auth/cipher combination |
| 24603 | 需要啟用 802.1x 時，其為停用 | 802.1x disabled when it's required to be enabled |
| 24604 | 需要停用 802.1x 時，其為啟用 | 802.1x enabled when it's required to be disabled |
| 24605 | PMK 快取模式無效 | Invalid PMK cache mode |
| 24606 | PMK 快取大小無效 | Invalid PMK cache size |
| 24607 | PMK 快取 TTL 無效 | Invalid PMK cache TTL |
| 24608 | 預先驗證模式無效 | Invalid PreAuth mode |
| 24609 | 預先驗證節流無效 | Invalid PreAuth throttle |
| 24610 | 當 PMK 快取停用時，預先驗證為啟用 | PreAuth enabled when PMK cache is disabled |
| 24611 | 網路的效能配對失敗 | Capability matching failed at network |
| 24612 | NIC 的效能配對失敗 | Capability matching failed at NIC |
| 24613 | 設定檔的效能配對失敗 | Capability matching failed at profile |
| 24614 | 網路不支援指定探索類型 | Network does not support specified discovery type |
| 24615 | 密碼包含無效的字元 | Passphrase contains invalid character |
| 24616 | 金鑰內容包含無效的字元 | Key material contains invalid character |
| 24617 | 指定的金鑰類型與金鑰內容不相符 | The key type specified does not match the key material |
| 24618 | 輸入的金鑰格式錯誤 | Entered key is not in a valid format |
| 24619 | 已懷疑有混和的儲存格 (AP 不是私人的，我們擁有啟用隱私權的設定檔) | Mixed cell suspected (AP not beaconing privacy, we have privacy enabled profile) |
| 24620 | 偵測到安全性降級 | Security downgrade detected |
| 24621 | 已懷疑 PSK 不相符 | PSK mismatch suspected |
| 24622 | 設定檔中的 802.1x 驗證計時器不正確 | 802.1x authentication timers in profile are incorrect |
| 24623 | 設定檔中的群組金鑰更新間隔錯誤 | Group key update interval in profile is incorrect |
| 24624 | 可能有轉換網路的情形，正在嘗試使用傳統 802.11 安全性 | Transition network suspected, trying legacy 802.11 security |
| 24625 | Windows 無法將所有字元對應到 US-ASCII。安全性金鑰必須以 US-ASCII 字元輸入。 | Windows could not map all of the characters into US-ASCII. Security keys must be entered as US-ASCII characters. |
| 24626 | 設定檔的功能比對失敗 (找不到加密編譯)。 | Capability matching failed at profile (cipher not found). |
| 24627 | 設定檔的功能比對失敗 (找不到驗證)。 | Capability matching failed at profile (auth not found). |
| 24628 | 強制失敗，因為連線方式不安全。 | Forced failure because the connection method was not secure. |
| 24629 | FIPS 140-2 模式值無效 | The FIPS 140-2 mode value is not valid |
| 24630 | 設定檔需要 FIPS 140-2 模式，該網路卡不支援此模式。 | The profile requires FIPS 140-2 mode, which is not supported by the network adapter. |
| 24631 | 設定檔需要 FIPS 140-2 模式，該網路不支援此模式。 | The profile requires FIPS 140-2 mode, which is not supported by the network. |
| 24632 | 四向交握的訊息 3 包含太多 RSN IE (RSN) | Message 3 of 4 way handshake contains too many RSN IE (RSN) |
| 24633 | 四向交握的訊息 2 沒有金鑰資料 (RSN 臨機操作) | Message 2 of 4 way handshake has no key data (RSN Adhoc) |
| 24634 | 四向交握的訊息 2 沒有 IE (RSN 臨機操作) | Message 2 of 4 way handshake has no IE (RSN Adhoc) |
| 24705 | 不支援設定檔中的驗證演算法。 | The authentication algorithm in the profile is not supported. |
| 24706 | 不支援設定檔中的加密演算法。 | The cipher algorithm in the profile is not supported. |
| 24707 | WCN 驗證已如預期完成。 | WCN authentication is completed as expected. |
| 28671 | 理由代碼無效 | Invalid Reason code |
| File Description: | 無線網路原則管理嵌入式管理單元 |
| File Version: | 10.0.15063.0 (WinBuild.160101.0800) |
| Company Name: | Microsoft Corporation |
| Internal Name: | WLANGPUI.DLL |
| Legal Copyright: | © Microsoft Corporation. All rights reserved. |
| Original Filename: | WLANGPUI.DLL.MUI |
| Product Name: | Microsoft® Windows® Operating System |
| Product Version: | 10.0.15063.0 |
| Translation: | 0x404, 1200 |