nfsrc.dll.mui NFS 资源库服务 c187d6d0e2ab5665923be54ab9ad8f58

  1. File Info
  2. MUI

File info

File name: nfsrc.dll.mui
Size: 30208 byte
MD5: c187d6d0e2ab5665923be54ab9ad8f58
SHA1: 9a54517fb899de87514eeaee30ddcb2915fb619b
SHA256: 72e02f4a41b0c8f5cadaddfbec6c990e02d020e47ad1bad8adf0c0c9fc176216
Operating systems: Windows 10
Extension: MUI

Translations messages and strings

If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id Chinese (Simplified) English
203
用法: nfsadmin mapping [computer name] [common_options] config config_options

common_options 包括:
-u user 要使用其凭据的用户的标识
-p password 用户的密码

config_options 包括:
mapLookup = [yes | no]
mapsvr = 使用指定的服务器进行用户名映射。
ADLookup = [yes | no]
ADDomain = 使用指定的 AD 域提供映射信息。
Usage: nfsadmin mapping [computer name] [common_options] config config_options

common_options are:
-u user Identity of the user whose credentials are to be used
-p password Password of the user

config_options are:
mapLookup = [yes | no]
mapsvr = Use specified server for User Name Mapping.
ADLookup = [yes | no]
ADDomain = Use specified AD domain to provide mapping information.
204
用法: nfsadmin client [computer name] [common_options] start | stop | config config_options

common_options 包括:
-u user 要使用其凭据的用户的标识
-p password 用户的密码

config_options 包括:
protocol = TCP|UDP|TCP+UDP 设置首选传输协议。
mtype = hard|soft 指定装载类型。
casesensitive = yes|no 指定装载的文件共享的区分大小写默认值。
retry = 设置软装载的重试次数。
timeout = 设置 RPC 调用的超时值(以秒为单位)。
perf = default 将性能参数重置为默认值。
UseReservedPorts = yes|no 使用小于 1024 的端口
rsize = 设置读取缓冲区的大小(以 KB 为单位)。
wsize = 设置写入缓冲区的大小(以 KB 为单位)。
fileaccess = 指定文件的权限模式。
将其用于在 NFS 服务器上创建的
新文件。使用 UNIX 样式模式位指定。
SecFlavors = [+|-]sys [+|-]krb5 [+|-]krb5i
指定允许的安全风格。
Usage: nfsadmin client [computer name] [common_options] start | stop | config config_options

common_options are:
-u user Identity of the user whose credentials are to be used
-p password Password of the user

config_options are:
protocol = TCP|UDP|TCP+UDP Set the preferred transport protocol.
mtype = hard|soft Specify the type of mount.
casesensitive = yes|no Specify the default case sensitivity of mounted file shares.
retry = Set the number of retries for a soft mount.
timeout = Set the timeout (in seconds) for an RPC call.
perf = default Reset performance parameters to default values.
UseReservedPorts = yes|no Use ports less than 1024
rsize = Set the read buffer size (in KB).
wsize = Set the write buffer size (in KB).
fileaccess = Specify the permission mode of the file.
These are used for new files created on NFS
servers. Specified using UNIX style mode bits.
SecFlavors = [+|-]sys [+|-]krb5 [+|-]krb5i [+|-]krb5p
Specify permitted security flavors.
205
用法 : nfsadmin [server | client | mapping ] [\\host]

有关详细的帮助，请键入 nfsadmin [server|client|mapping] /?
Usage : nfsadmin [server | client | mapping ] [\\host]

For detailed help type nfsadmin [server|client|mapping] /?
206安全风格 : Security flavors :
208
选项无效。将 mtype 设置为 soft，以便配置 retry 值。
Invalid option. Set mtype to soft to configure retry value.
211找不到计算机。请确认输入的计算机名是否正确以及计算机是否处于联机状态。 Computer not found. Verify that the computer name is entered correctly and that the computer is online.
213找不到服务 '%s'。 Service '%s' was not found.
215
读取缓冲区大小无效。请指定 1、2、4、8、16、32、64、128、256、512 或 1024 中的一个数字。
Invalid read buffer size. Specify one of 1 2 4 8 16 32 64 128 256 512 or 1024.
216
写入缓冲区大小无效。请指定 1、2、4、8、16、32、64、128、256、512 或 1024 中的一个数字。
Invalid write buffer size. Specify one of 1 2 4 8 16 32 64 128 256 512 or 1024.
219
重试值无效。请指定介于 0 到 10 之间的值。
Invalid retry value. Specify a value between 0 and 10.
220
timeout 值无效。请指定介于 1 到 60 之间的值。
Invalid timeout value. Specify a value between 1 and 60.
221
协议值无效。请指定 TCP 或 UDP，或者 TCP+UDP。
Invalid protocol value. Specify TCP or UDP or TCP+UDP.
231
值无效。请为 fsize 选项指定小于 4096 MB (4 GB)的正数。
Invalid value. Specify a positive number less than 4096 Megabytes (4 Gigabyte) for fsize option.
236
fileaccess 值无效。请将 fileaccess 选项指定为 xyz，其中
x、y 和 z 是 UNIX 样式 chmod 权限，介于 0 到 7 之间(包含 0 和 7)
0 代表无，1 代表 x，2 代表 w，3 代表 wx，4 代表 r，5 代表 rx，6 代表 rw，7 代表 rwx。
Invalid fileaccess value. Specify fileaccess option as xyz where
x y and z are UNIX style chmod permissions between 0 and 7 (both inclusive)
0 for none 1 for x 2 for w 3 for wx 4 for r 5 for rx 6 for rw and 7 for rwx.
245
无效驱动器。请为审核文件指定一个本地驱动器。
Invalid drive. Specify a local drive for the audit file.
247
无效路径。请为审核文件指定一个绝对路径。
Invalid path. Specify an absolute path for the audit file.
249
空间不足。请清理一些文件，然后重新指定 fsize 选项或指定较小的 fsize 值。
Out of space. Clean up some files and specify fsize option again or specify a smaller fsize value.
250
没有指定审核文件名称。请为审核指定文件名称。
Audit file name not specified. Specify a filename for auditing.
253
指定的选项不兼容
The options specified are incompatible
254设置更新成功。
 The settings were successfully updated.
255未能更新设置。
 Failed to update the settings.
260指定的客户端在此 NFS 服务器上没有锁定。
 The client specified has no locks on this Server for NFS.
262服务已成功停止。
 The service was stopped successfully.
268
找不到计算机。请确认指定的计算机名是否正确。
Computer not found. Verify that the computer name is specified correctly.
269
客户端组无效。请指定有效的客户端组。
Invalid client group. Specify a valid client group.
270
客户端组已存在。请指定新的客户端组名。
Client group already exists. Specify a new client group name .
271无效域。请指定一个有效的域名。
 Invalid domain. Specify a valid domain name.
285
任何客户端均未持有锁定
There are no locks held by any client
286
以下是持有锁定的客户端:
The following are the clients which hold locks:

288
没有客户端组
There are no client groups
289
以下是客户端组
The following are the client groups
290%s 在 %s 中已存在。
 %s is already present in %s.
291已将 %s 成功添加到 %s。
 %s was successfully added to %s.
292
客户端组中没有成员
There are no members in the client group
293
以下是客户端组中的成员
The following are the members in the client group
294%s 不是该组的成员
 %s is not a member of the group
295%s 已成功删除
 %s was successfully deleted
296以下是 %s 上的设置

 The following are the settings on %s

310协议 : Protocol :
311映射服务器 : Mapping Server :
312装载类型 : Mount Type :
313重试次数 : Retries :
314超时 : Timeout :
315读取缓冲区大小 : Read Buffer Size :
316写入缓冲区大小 : Write Buffer Size :
317
文件设置
File Settings
318用户 : %s
 User : %s
319组 : %s
 Group : %s
320其他 : %s
 Others : %s
321区分大小写 : Case Sensitive :
322锁定后台程序宽限期 : Locking Daemon Grace Period :
323AD 查找 : AD Lookup :
324AD 域 : AD Domain :
326SOFT SOFT
327HARD HARD
328秒 seconds
329使用保留端口 : 是 Use reserved ports : yes
330使用保留端口 : 否 Use reserved ports : no
331映射服务器查找 : Mapping Server Lookup :
335%s 不是有效的计算机。
 %s is not a valid machine.
337已启用
Enabled
338已禁用
Disabled
352已成功删除 %s 与 %s\%s 之间的映射。
 Successfully deleted the map between %s and %s\%s.
353已成功添加映射。
 The map is added successfully.
355
宽限期无效。请为宽限期指定一个正整数(小于 3600 秒)。
Invalid grace period. Specify a positive integer for grace period(less than 3600 seconds).
358已成功还原用户名映射服务的配置和映射。
 Username Mapping Service configuration and maps have been restored successfully.
359已成功备份用户名映射服务的配置和映射。
 Username Mapping Service configuration and maps have been backed up successfully.
361该映射已成功设置为主要映射。
 The map is set as primary successfully.
362该映射已经是主要映射。
 The map is already a primary map.
363该映射不存在，因此无法设置为主要映射。
 The map does not exist and hence cannot be set as primary.
365无法在所有群集节点上更新设置。
 The settings could not be updated on all the cluster nodes.
372
renewauthinterval 值无效。renewauthinterval 的有效值为正数。
Invalid renewauthinterval value. The valid values for renewauthinterval is a positive number.
373
dircache 值无效。dircache 的有效值为 4 的倍数，介于 4 到 128 之间。
Invalid dircache value. The valid values for dircache are in multiples of 4 from 4 to 128.
374
文件名无效。请指定有效的文件名。
Invalid filename. Please specify a valid file name.
375
dotfileshidden 值无效。dotfileshidden 的有效值为 yes 和 no。
Invalid dotfileshidden value. The valid values for dotfileshidden are yes and no.
381启用 NFS V3 支持 : Enable NFS V3 Support :
382续订身份验证 : Renew Authentication :
384续订身份验证间隔 : Renew Authentication Interval :
385目录缓存 : Directory Cache :
386转换文件名 : Translation File Name :
387隐藏点文件 : Dot Files Hidden :
389是 Yes
390否 No
392身份验证的续订已禁用。请先设置 renewauth=yes。
 Renewal of Authentication disabled. Set renewauth=yes first.
393身份验证的续订已启用。
 Renewal of authentication enabled already.
394小写
 Lower Case
395大写
 Upper Case
396保留大小写
 Preserve Case
397停止服务时发生错误。
 Error occurred while stopping the service.
400
服务已经启动。
The service is already started.
403小时 hours
404分钟 minutes
414
服务被暂停。
The service has been paused.
415
恢复了服务。
The service has been resumed.
416
服务不能被暂停。
The service could not be paused.
417
不能恢复服务。
The service could not be resumed.
701
指定的选项或选项组合无效。有关进一步的帮助，请查看用法。
Invalid option or invalid combination of options specified. Look at usage for further help.
702
无法再添加更多的组，因为已达到可以添加的最大组数(64)。
You cannot add more groups as you have reached the maximum number of groups that can be added (64).
703
无法再向此组添加更多的客户端，因为已达到可以添加的最大客户端数(250)。
You cannot add more clients to this group as you have reached the maximum number of clients that can be added (250).
704NetGroup 源 : NetGroup Source :
705NIS 服务器 : NIS Server :
706NIS 域 : NIS Domain :
707LDAP 服务器或 AD 域 : LDAP Server or AD Domain :
708LDAP 命名上下文(DN) : LDAP naming context (DN) :
1203组文件 : Group file :
1204UNIX 用户和组的源 : UNIX Users and Groups Source :
1206NT 域 : NTDomain :
1207密码文件 : Password file :
1208刷新间隔 : Refresh Interval :
1219指定的映射已存在。 The specified mapping already exists.
1221操作失败。 Operation failed.
1225指定了无效选项。 Invalid option specified.
1231时间值无效。 Invalid values for time.
1236缺少此操作的强制选项。 Mandatory option missing for this operation.
1249从注册表读取数据时出错。 Error reading data from registry.
1251指定的文件无法打开。 The specified file could not be opened.
1265
高级用户映射:
Windows 用户 UNIX 用户 UID GID
--------------------------------------------------------------------------------
Advanced User Mappings:
Windows user UNIX user Uid Gid
--------------------------------------------------------------------------------
1266
高级组映射:
Windows 组 UNIX 组 GID
-------------------------------------------------------------------------
Advanced Group Mappings:
Windows group UNIX group Gid
-------------------------------------------------------------------------
1267
简单用户映射:
Windows 用户 UNIX 用户 UID GID
-------------------------------------------------------------------------------
Simple User Mappings:
Windows user UNIX user Uid Gid
-------------------------------------------------------------------------------
1268
简单组映射:
Windows 组 UNIX 组 GID
-------------------------------------------------------------------------
Simple group Mappings:
Windows group UNIX group Gid
-------------------------------------------------------------------------
1271
用户映射:
Windows 用户 UNIX 用户 UID 主要 GID
-------------------------------------------------------------------------------
User Mappings:
Windows user UNIX user Uid Primary Gid
-------------------------------------------------------------------------------
1272
组映射:
Windows 组 UNIX 组 GID
-------------------------------------------------------------------------
Group Mappings:
Windows group UNIX group Gid
-------------------------------------------------------------------------
1273无法访问指定的 NIS 服务器。 Unable to access specified NIS server.
1274无法访问指定的 NIS 域。 Unable to access specified NIS domain.
1275访问 NIS 服务器或域时出错。 Error while accessing NIS server or domain.
1276只能配置 %d 台映射服务器。 You can configure only %d mapping server.
1277指定的 Windows 组已映射。 The specified Windows group is already mapped.
1278指定的 Windows 用户已映射。 The specified Windows user is already mapped.
1279找不到指定的映射。
 The specified map could not be found.
1280执行还原时出错。
 An error occurred while performing restore.
1281无法执行所请求的操作，因为无法与映射服务联系。
 Unable to perform the requested operation as the mapping service cannot be contacted.
1282从注册表读取高级用户或组映射时出错。管理员需要使用备份来还原映射，或使用网络文件系统服务管理工具重新创建高级映射。 Error in reading advanced user or group maps from the registry. Administrator needs to restore maps from a backup, or re-create the advanced maps using the Services for Network File System administration tools.
1283将高级用户或组映射写入注册表时出错。用户名映射服务器无法更新映射。管理员需要使用备份来还原映射，或使用网络文件系统服务管理工具重新创建高级映射。 Error in writing advanced user or group maps to the registry. Username Mapping Server cannot update maps. Administrator needs to restore maps from a backup, or re-create the advanced maps using the Services for Network File System administration tools.
1284执行备份时出错。
 An error occurred while performing backup.
1285有关警告和错误的详细列表，请参阅文件 。
 Please check the file for a detailed list of warnings and errors.
1286管理远程计算机时无法创建 PCNFS 用户/组的映射。
在控制台上或远程桌面连接中运行网络文件系统服务管理工具，可以创建 PCNFS 映射。
 You cannot create mappings for PCNFS users/groups when administering a remote computer.
You can create PCNFS mappings by running the Services for Network File System administration tool on the console or in a remote desktop connection.
1287密码文件保存在 目录中。
请将文件从上述位置复制到远程计算机上，
并使用网络文件系统服务管理工具
更新远程计算机上的密码文件位置设置。
 The passwd file is saved in the directory.
Please copy the file from the above location to the remote machine
and update the passwd file location setting on the remote machine
using the Services for Network File System administration tools.
1288密码文件保存在 目录中，设置会相应地更新。
 The passwd file is saved in the directory and the settings are updated accordingly.
1289无法写入磁盘。如果磁盘已满，请释放一些空间，然后重试。
 Could not write to disk. If the disk is full, please free up some space and try again.
1290组文件保存在 目录中，设置会相应地更新。
 The group file is saved in the directory and the settings are updated accordingly.
1291密码文件和组文件保存在 目录中，设置会相应地更新。
 The passwd and group files are saved in the directory and the settings are updated accordingly.
1292组文件保存在 目录中。
请将文件从上述位置复制到远程计算机上，
并使用网络文件系统服务管理工具
更新远程计算机上的组文件位置设置。
 The group file is saved in the directory.
Please copy the file from the above location to the remote machine
and update the group file location setting on the remote machine
using the Services for Network File System administration tools.
1293passwd 文件和 group 文件保存在 目录中。
请将文件从上述位置复制到远程计算机上，
并使用网络文件系统服务管理工具
更新远程计算机上的 passwd 文件和 group 文件的位置设置。
 The passwd and group files are saved in the directory.
Please copy the files from the above location to the remote machine
and update the passwd and group file location settings on the remote machine
using the Services for Network File System administration tools.
1294查找 NFS 服务安装路径失败。
 Failed to lookup Services for NFS installation path.
1295因为存在打开的句柄指向一个 NFS 服务器，无法停止 NFS 客户端。 Client for NFS could not be stopped because there are open handles to an NFS server.
1296未提供映射服务器。
当 设置为 [yes] 时，请使用 选项。
 Mapping server not provided.
Please use option when is set to [yes].
2200
命令已成功完成。
The command completed successfully.
2333参数不足: 缺少 mapname 或选项参数 insufficient arguments: missing mapname or arguments for option
2395
Windows 域到 UNIX 域的映射:

Windows 域 UNIX 域
-------------------------------------------------------------------------
Windows domain to UNIX domain Mappings:

Windows Domain UNIX Domain
-------------------------------------------------------------------------
2396没有要删除的域映射。
 There are no domain mappings to remove.
2398域映射已成功删除。
 The domain mapping removed successfully.
2399
设置已成功更改。但是应注意，只有重新启动 NFS 服务器之后，新设置才会生效。
The settings have been changed successfully. However note that the new settings will take effect only when the Server For NFS is restarted.
2406天 Days
2411装入 Mount
2412读取 Read
2413写入 Write
2414创建 Create
2415删除 Delete
2416锁定 Locking
2419, ,
2420在命令行重复选项。
选项 =
Duplicate option on command line.
option =
2425
服务已经启动成功。
The service was started successfully.
2428此命令行太长
 The command line is too long
2429密码 : password :
2430确认服务安装在 '%s' 上
 Verify that the service is installed on '%s'
2431内存不足: Out of memory:
2432TCP
 TCP
2433UDP
 UDP
2434TCP+UDP
 TCP+UDP
2435Portmap 的协议 : Protocol for Portmap :
2436Mount 的协议 : Protocol for Mount :
2437NFS 的协议 : Protocol for NFS :
2438NLM 的协议 : Protocol for NLM :
2439NSM 的协议 : Protocol for NSM :
2440映射服务器的协议 : Protocol for Mapping Server :
2441NIS 的协议 : Protocol for NIS :
2442sys sys
2443krb5 krb5
2444krb5i krb5i
2445krb5p krb5p
2702“%s”不是绝对路径。
 '%s' is not an absolute path.
2704
无法读取文件 -“%s”。确保文件存在并且具有读取权限。
Could not read file - '%s'. Make sure the file exists and has read permission.
2705
输入的刷新间隔超过了允许的限制(14399999 分钟)。
The refresh interval entered exceeds the allowed limit (14399999 minutes).
2706
输入的刷新间隔超过了允许的限制(239999 小时)。
The refresh interval entered exceeds the allowed limit (239999 hours).
2707
指定的文件已损坏。
The specified file is corrupted.
2708
你尝试管理的计算机上的产品版本不同于你计算机上的版本。除非在你的计算机上安装相同版本的网络文件系统服务，否则将无法在远程计算机上执行管理任务。
The machine you are attempting to administer has a different version of the product compared to the version on your machine. You cannot perform administration tasks on a remote computer unless you have the same version of Services for Network File System installed on your machine.
2710
无法还原。文件已在较高版本的 NFS 服务上进行备份。
Cannot restore. The file was backed up on a higher version of Services for NFS.
2712
列出锁定时出错。
Error occured while listing the locks.
2713
列出锁定时出错。锁定文件已损坏。
Error occured while listing the locks. Lock file is corrupted.
2714
删除指定客户端持有的锁定时出错。
Error occured while removing the locks held by specified clients.
2715
删除指定客户端持有的锁定时出错。锁定文件已损坏。
Error occured while removing the locks held by specified clients. Lock file is corrupted.
2717
刷新间隔(-r 选项)的值无效。刷新间隔的最小值为 5 分钟。
Invalid value for refresh interval (-r option). Minimum value for refresh interval is 5 minutes.
2718“%s”- 客户端名称不能与组名相同。请指定其他客户端或重命名组。
 '%s' - client name cannot be the same as the group name. Please specify a different client or rename the group.
2720无法读取网络文件系统服务注册表项。网络文件系统服务未在 %s 上正确安装。
 Unable to read Services for Network File System registry keys. Services for Network File System is not properly installed on %s.
2721备份文件名的值无效。 Invalid value for backup filename.
2722还原文件名的值无效。 Invalid value for restore filename.
2732NT 用户名(-wu 选项)的值无效。 Invalid value for NT user name (-wu option).
2733NT 组名(-wg 选项)的值无效。 Invalid value for NT group name (-wg option).
2734UNIX 用户名(-uu 选项)的值无效。 Invalid value for UNIX user name (-uu option).
2735UNIX 组名(-ug 选项)的值无效。 Invalid value for UNIX group name (-ug option).
2738无法删除 %s 与 %s\%s 之间的主要映射。
 Can not delete a primary map between %s and %s\%s.
2740PCNFS 用户名(-uu 选项)的值无效。 Invalid value for PCNFS user name (-uu option).
2741PCNFS 组名(-ug 选项)的值无效。 Invalid value for PCNFS group name (-ug option).
2745创建组文件的访问被拒绝。 Access Denied to create the group file.
2747指定的域映射已存在。请指定其他映射。
 The specified domain mapping already exists. Specify a different map.
2748指定的选项一直受到抨击。有关进一步的帮助，请参阅用法。
 The specified option is deprecated. Please see usage for further help.
2749请指定创建有效域映射所有必需的值
 Please specify all required values to form a valid domain mapping
2756指定的文件无法创建。 The specified file could not be created.
2770无效的选项合并。 Invalid option combination.
2771内存不足 Out of memory
2772发生意外错误。 An unexpected error occurred.
2773未指定用户名 (-u 选项)。 User name is not specified (-u option).
2776
启动服务时发生错误。
Error occured while starting the service.
2777无效选项参数。 Invalid option argument.
2778不支持的 Windows 版本
 Unsupported Windows version
2780连接到 NFS WMI 提供程序失败。 Failed to connect to NFS WMI provider.
3001操作 NFS 文件的服务属性。

Manipulates attributes of Services for NFS files.

3002NFSFILE [/v] [/s] [/i[[u=]|[g=]|[wu=]|[wg=]]]
NFSFILE [/v] [/s] [/i[[u=]|[g=]|[wu=]|[wg=]]]
3003[/r[[u=]|[g=]|[m=]]] [/c[w|x]]

[/r[[u=]|[g=]|[m=]]] [/c[w|x]]

3004/? - 此消息
/? - this message
3005/v - verbose
/v - verbose
3006/s - 扫描子目录查找匹配的文件
/s - scan sub-directories for matching files
3007/i - 包括与指定标准相匹配的文件
/i - include files matching the specified criteria
3008u - NFS 所有者 SID 匹配
u - NFS owner SID matches
3009g - NFS 组 SID 匹配
g - NFS group SID matches
3010wu - NFS 所有者 SID 匹配
wu - NFS owner SID matches
3011wg - NFS 组 SID 匹配
wg - NFS group SID matches
3012/r - 替换文件上的指定选项
/r - replace specified option on file
3013u - 设置 uid
u - set uid
3014g - 设置 gid
g - set gid
3015m - 将模式位设置为
m - set modebits to
3016wu - 设置 Windows 所有者帐户
wu - Set Windows Owner account
3017wg - 设置 Windows 组帐户
wg - Set Windows Group account
3018/c - 转换文件依据
/c - convert the file according to
3019w - Windows 样式 ACL (已映射)
w - Windows style ACL (Mapped)
3020x - Unix 样式 ACL (未映射)
x - Unix Style ACL (Unmapped)
3102无法打开文件 %s: Could not open file %s:
3103在不指定 uid/gid 和 "/cx" 选项的情况下，无法将文件“%s”转换为本机 Unix 样式。
Cannot convert file '%s' to Native Unix style without specifying a uid/gid and the '/cx' option.
3104对文件 %s 的操作失败: Operation on file %s failed:
3105在不指定所有者/组帐户名称和 "/cw" 选项的情况下，无法将文件“%s”转换为 Windows 样式。
Cannot convert file '%s' to Windows style without specifying Owner/Group account name and the '/cw' option.
3106修改的文件: %s。
Modified file: %s.
3107W %wZ %s %s %s
W %wZ %s %s %s
3108X %wZ %6d %6d %s
X %wZ %6d %6d %s
3109文件 %s 的映射类型无效
Invalid mapping type for file %s
3110
已成功处理 %d 个文件；%d 个文件处理失败

Successfully processed %d files; Failed processing %d files
3111“%s”是无效的 Windows 帐户名。
'%s' is an invalid Windows Account Name.
3112开始处理“%s”...

Start to process '%s'...

3113指定的模式位无效。
Specified mode bits are invalid.
3114Windows 帐户“%s”未映射到任何有效的 UID/GID。
The windows account '%s' is not mapped to any valid UID/GID.
3115UID/GID“%d”未映射到任何有效的 Windows 帐户。
The UID/GID '%d' is not mapped to any valid windows account.
3116“%s”不是有效的 UID/GID 值。
'%s' is not a valid UID/GID value.
4001配置和管理 NFS 服务 Configures and manages Services for NFS
4002Network File System 服务(NFS) Services for Network File System (NFS)
5001Client for NFS Client for NFS
5002使该计算机可以访问 NFS 共享上的文件 Enables this computer to access files on NFS shares
5003Client for NFS Redirector Client for NFS Redirector
5004NFS 客户端的内核端部分。使基于 Windows 的计算机可以访问 NFS 服务器共享 Kernel-side part of Client for NFS. Enables a Windows based computer to access NFS server shares
5005Server for NFS Filesystem Filter Server for NFS Filesystem Filter
5006NFS 服务器的内核端部分。使基于 Windows 的计算机可以用作 NFS 服务器 Kernel-side part of Server for NFS. Enables a Windows based computer to act as an NFS Server
5007Server for NFS Server for NFS
5008使基于 Windows 的计算机可以用作 NFS 服务器 Enables a Windows based computer to act as an NFS Server
5009Server for NFS Driver Server for NFS Driver
5011Server for NFS Open RPC (ONCRPC) Server for NFS Open RPC (ONCRPC)
5012提供对开放式远程过程调用(ONCRPC)协议的支持 Provides support for the Open Remote Procedure Call (ONCRPC) protocol
5013Server for NFS Open RPC (ONCRPC) Portmapper Server for NFS Open RPC (ONCRPC) Portmapper
5014使 ONCRPC 客户端可以在该计算机上查找服务器并与其连接 Allows ONCRPC clients to find servers on this machine and connect to them
8001缺少注册表值“%s”。
 The registry value '%s' is missing.
8002密码: Password:
8003密码过长! Password too long!
8004
用法: nfsadmin server [computer name] [common_options] start | stop | -l | -r client
common_options 包括:
-u user 要使用其凭据的用户的标识
-p 用户的密码

config_options 包括:
nfsadmin server config config_options

nfsadmin server [computer name] [creategroup | deletegroup |
listgroups | renamegroup |
addmembers | deletemembers | listmembers]

-l 枚举持有 NFS 锁定的客户端。
-r client 强制释放某个客户端持有的锁定。使用 "all"
释放所有客户端。

config_options 包括:

activity = [+/-]mount [+/-]read [+/-]write [+/-]create
[+/-]delete [+/-]locking [+/-]all
指定要记录的客户端活动。
lockperiod =
设置锁定后台程序的宽限期。
PortmapProtocol = TCP|UDP|TCP+UDP
Portmapper 的协议。
MountProtocol = TCP|UDP|TCP+UDP
MOUNT 程序的协议支持。
NFSProtocol = TCP|UDP|TCP+UDP
NFS 程序的协议支持。
NLMProtocol = TCP|UDP|TCP+UDP
NLM 程序的协议支持。
NSMProtocol = TCP|UDP|TCP+UDP
NSM 程序的协议支持。
MapsvrProtocol = TCP|UDP|TCP+UDP
MAPSVR 程序的协议支持。
NISProtocol = TCP|UDP|TCP+UDP
NIS 程序的协议支持。
enablev3 = [yes | no]
启用/禁用 NFS V3 支持。
renewauth = [yes | no]
启用/禁用身份验证的续订。
renewauthinterval =
指定身份验证时间间隔(以秒为单位)。
dircache = 指定目录缓存大小(以 KB 为单位)。
translationfile =
指定用于字符转换的文件。
dotfileshidden = [yes | no]
创建以 . 开头的隐藏文件。
指定 READDIR 的返回文件名大小写。
netgroupsource = [none | nis | rfc2307]
指定检查 netgroup 信息的位置。
nisserver =
使用指定的 NIS 服务器用于 netgroup 查询。
nisdomain =
使用指定的 NIS 域名。
ldapserver =
使用指定的 LDAP 服务器进行网络组查询。
ldapdn =
使用指定的命名上下文(DN)进行 LDAP 查询。

与客户端组有关的操作:
creategroup 创建具有给定名称的客户端组。
deletegroup 删除具有给定名称的现有客户端组。
listgroups 列出此服务器上的客户端组。
renamegroup
将现有客户端组 重命名为
addmembers host[,host,...]
将主机添加到给定客户端组。
deletemembers host[,host,...]
删除给定客户端组的主机。
listmembers 列出指定客户端组中的主机。
Usage: nfsadmin server [computer name] [common_options] start | stop | -l | -r client
common_options are:
-u user Identity of the user whose credentials are to be used
-p Password of the user

config_options are:
nfsadmin server config config_options

nfsadmin server [computer name] [creategroup | deletegroup |
listgroups | renamegroup |
addmembers | deletemembers | listmembers]

-l Enumerate clients holding NFS locks.
-r client Force release locks held by a client. Use 'all'
for all clients.

config_options are:

activity = [+/-]mount [+/-]read [+/-]write [+/-]create
[+/-]delete [+/-]locking [+/-]all
Specify the client activity to record.
lockperiod =
Set the grace period for the locking daemon.
PortmapProtocol = TCP|UDP|TCP+UDP
Protocol for Portmapper.
MountProtocol = TCP|UDP|TCP+UDP
Protocol support for MOUNT program.
NFSProtocol = TCP|UDP|TCP+UDP
Protocol support for NFS program.
NLMProtocol = TCP|UDP|TCP+UDP
Protocol support for NLM program.
NSMProtocol = TCP|UDP|TCP+UDP
Protocol support for NSM program.
MapsvrProtocol = TCP|UDP|TCP+UDP
Protocol support for MAPSVR program.
NISProtocol = TCP|UDP|TCP+UDP
Protocol support for NIS program.
enablev3 = [yes | no]
Enable/Disable NFS V3 support.
renewauth = [yes | no]
Enable/Disable renewal of authentication.
renewauthinterval =
Specify the authentication interval (in secs).
dircache = Specify the directory cache size (in KB).
translationfile =
Specify the file used for character translation.
dotfileshidden = [yes | no]
Create files beginning with dot as hidden files.
Specify the return file name case for READDIR.
netgroupsource = [none | nis | rfc2307]
Specify where to check the netgroup information.
nisserver =
Used specified NIS server for netgroup query.
nisdomain =
Used specified NIS domain name.
ldapserver =
Used specified Ldap server for netgroup query.
ldapdn =
Used specified naming context (DN) for ldap query.

client group related operations:
creategroup Create a client group with the given name.
deletegroup Delete an existing client group with the given name.
listgroups List client groups on this server.
renamegroup
Rename existing client group to
addmembers host[,host,...]
Add hosts to the given client group.
deletemembers host[,host,...]
Delete hosts of the given client group.
listmembers List host from the specified client group.
8005活动日志记录设置: Activity logging Settings :
8006没有足够的权限执行此操作。请验证在 %s 上是否具有管理权限
 Insufficient privileges for this operation. Verify that you have administrative privileges on %s
9001NFS 客户端 Client for NFS
9002NFS 服务器 Server for NFS
9003基于 UNIX 的软件的 Portmap Portmap for UNIX-based Software
9004NFS 客户端远程管理 NFS Client Remote Management
9005NFS 服务器远程管理 NFS Server Remote Management
9100NFS 客户端(UDP-In) Client for NFS (UDP-In)
9101NFS 客户端(UDP-Out) Client for NFS (UDP-Out)
9102NFS 客户端(TCP-In) Client for NFS (TCP-In)
9103NFS 客户端(TCP-Out) Client for NFS (TCP-Out)
9120NFS 客户端允许 NFS 客户端服务通信的入站规则。[UDP] An inbound rule for Client for NFS to allow traffic for the NFS client service. [UDP]
9121NFS 客户端允许 NFS 客户端服务通信的出站规则。[UDP] An outbound rule for Client for NFS to allow traffic for the NFS client service. [UDP]
9122NFS 客户端允许 NFS 客户端服务通信的入站规则。[TCP] An inbound rule for Client for NFS to allow traffic for the NFS client service. [TCP]
9200NFS 服务器(NFS-UDP-In) Server for NFS (NFS-UDP-In)
9201NFS 服务器(NFS-UDP-Out) Server for NFS (NFS-UDP-Out)
9202NFS 服务器(NFS-TCP-In) Server for NFS (NFS-TCP-In)
9203NFS 服务器(NFS-TCP-Out) Server for NFS (NFS-TCP-Out)
9220NFS 服务器允许 NFS 通信的入站规则。[UDP 2049] An inbound rule for Server for NFS to allow NFS traffic. [UDP 2049]
9221NFS 服务器的出站规则。[UDP] An outbound rule for Server for NFS. [UDP]
9222NFS 服务器允许 NFS 通信的入站规则。[TCP 2049] An inbound rule for Server for NFS to allow NFS traffic. [TCP 2049]
9223NFS 服务器的出站规则。[TCP] An outbound rule for Server for NFS. [TCP]
9600基于 UNIX 的软件的 Portmap (UDP 入站) Portmap for UNIX-based Software (UDP-In)
9601基于 UNIX 的软件的 Portmap (UDP 出站) Portmap for UNIX-based Software (UDP-Out)
9602基于 UNIX 的软件的 Portmap (TCP 入站) Portmap for UNIX-based Software (TCP-In)
9603基于 UNIX 的软件的 Portmap (TCP 出站) Portmap for UNIX-based Software (TCP-Out)
9620基于 Unix 软件的 Portmap 的入站规则，允许 Portmap 服务的流量。[UDP 111] An inbound rule for Portmap for Unix-based Software to allow traffic for the Portmap service. [UDP 111]
9621基于 Unix 软件的 Portmap 的出站规则，允许 Portmap 服务的流量。[UDP] An outbound rule for Portmap for Unix-based Software to allow traffic for the Portmap service. [UDP]
9622基于 Unix 软件的 Portmap 的入站规则，允许 Portmap 服务的流量。[TCP 111] An inbound rule for Portmap for Unix-based Software to allow traffic for the Portmap service. [TCP 111]
9623基于 Unix 软件的 Portmap 的出站规则，允许 Portmap 服务的流量。[TCP] An outbound rule for Portmap for Unix-based Software to allow traffic for the Portmap service. [TCP]
9700NFS 客户端远程管理 - 远程注册表(NP 入站) NFS Client Remote Management - Remote Registry (NP-In)
9701NFS 客户端远程管理的入站规则，允许通过命名管道远程管理注册表。[TCP 445] Inbound rule for NFS Client Remote Management to allow the registry to be remotely managed over Named Pipes. [TCP 445]
9702NFS 服务器远程管理 - 远程注册表(NP 入站) NFS Server Remote Management - Remote Registry (NP-In)
9703NFS 服务器远程管理的入站规则，允许通过命名管道远程管理注册表。[TCP 445] Inbound rule for NFS Server Remote Management to allow the registry to be remotely managed over Named Pipes. [TCP 445]
19001此功能提供 NFS 客户端支持。 This feature provides NFS client support.
19002此功能允许此计算机使用 NFS 协议共享文件。 This feature allows this computer to share files with the NFS protocol.
19003此功能提供对基于 UNIX 软件的 Portmap 的支持。 This feature provides support for Portmap for UNIX-based Software.
19004此功能用于远程管理 NFS 客户端(使用命名管道) This feature is for remotely managing Client for NFS (Uses Named Pipes)
19005此功能用于远程管理 NFS 服务器(使用命名管道) This feature is for remotely managing Server for NFS (Uses Named Pipes)

EXIF

File Name:nfsrc.dll.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-nfs-shared.resources_31bf3856ad364e35_10.0.15063.0_zh-cn_1599ad04245e1ca6\
File Size:30 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:29696
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Dynamic link library
File Subtype:0
Language Code:Chinese (Simplified)
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:NFS 资源库服务
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:nfsrc.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:nfsrc.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0

What is nfsrc.dll.mui?

nfsrc.dll.mui is Multilingual User Interface resource file that contain Chinese (Simplified) language for file nfsrc.dll (NFS 资源库服务).

File version info

File Description:NFS 资源库服务
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:nfsrc.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:nfsrc.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x804, 1200