bootmgfw.efi.mui Boot Manager b8ba636abdff2ec18641319a72835e9e

File info

File name: bootmgfw.efi.mui
Size: 63904 byte
MD5: b8ba636abdff2ec18641319a72835e9e
SHA1: 9583552b1a310077f8f374dc9f97a225febc150c
SHA256: e17933b092951686b2e5bc635085d9c5fa5df0a56da6912ed0c2cff107b98991
Operating systems: Windows 10
Extension: MUI

Translations messages and strings

If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id Chinese (Simplified) English
0x2329BM_MSG_FIRST BM_MSG_FIRST
0x232A你电脑的引导配置数据丢失或包含错误。 The Boot Configuration Data for your PC is missing or contains errors.
0x232B若要为此选择指定高级选项,请按 F8。 To specify an advanced option for this choice, press F8.
0x232C枚举全局参数时出错。 There was a problem enumerating global parameters.
0x232D出现意外错误。 An unexpected error has occurred.
0x232E无法加载应用程序或操作系统,原因是所需文件丢失或包含错误。 The application or operating system couldn't be loaded because a required file is missing or contains errors.
0x232F引导配置数据文件不包含有效的操作系统信息。 The Boot Configuration Data file doesn't contain valid information for an operating system.
0x2334未连接或无法访问所需设备。 A required device isn't connected or can't be accessed.
0x2335无法访问所需文件,原因是未正确加载你的 BitLocker 密钥。 A required file couldn't be accessed because your BitLocker key wasn't loaded correctly.
0x2336由于内存不足,因此无法创建 Ramdisk 设备。 There isn't enough memory available to create a ramdisk device.
0x2337引导配置数据文件丢失了一些必要的信息。 The Boot Configuration Data file is missing some required information.
0x2338无法加载 64 位应用程序,原因是你的电脑没有 64 位处理器。如果你正在使用 Windows To Go,请确保你的 USB 设备的 Windows 版本与你要使用的电脑兼容。 This 64-bit application couldn't load because your PC doesn't have a 64-bit processor. If you're using Windows To Go, make sure your USB device has a version of Windows that's compatible with the PC you're trying to use.
0x2339发生异常 I/O 错误。 An unexpected I/O error has occurred.
0x233A此文件标头的校验和与计算得出的校验和不符。 The header checksum for this file doesn't match the computed checksum.
0x233B无法验证此文件的数字签名。 The digital signature for this file couldn't be verified.
0x233C引导配置数据存储中存在无效的对象。 There is an invalid object in the Boot Configuration Data store.
0x233DBitLocker BitLocker
0x233E输入 PIN 以解锁此驱动器 Enter the PIN to unlock this drive
0x233F错误的 PIN;请重新输入 PIN Incorrect PIN; please enter the PIN again
0x2340PIN 输入尝试次数太多 Too many PIN entry attempts
0x2341输入此驱动器的恢复密钥 Enter the recovery key for this drive
0x2342最后六位错误;请重新输入 The last six digits are incorrect; please enter them again
0x2343恢复密钥错误;请重新输入 The recovery key is incorrect; please enter it again
0x2344输入密码以解锁此驱动器 Enter the password to unlock this drive
0x2345密码错误;请重新输入密码 Incorrect password; please enter the password again
0x2346密码输入尝试次数太多 Too many password entry attempts
0x2347插入包含 BitLocker 密钥的 U 盘 Plug in the USB drive that has the BitLocker key
0x2348该 U 盘上没有有效的 BitLocker 密钥 There is no valid BitLocker key on this USB drive
0x2349要恢复该驱动器,请插入包含 BitLocker 恢复密钥的 U 盘 To recover this drive, plug in the USB drive that has the BitLocker recovery key
0x234A该 U 盘上没有有效的恢复密钥 There is no valid recovery key on this USB drive
0x234B你必须输入恢复密钥才能访问启动设置 You must enter your recovery key to access Startup Settings
0x234CBitLocker 需要使用你的恢复密钥解锁驱动器,原因是 Bitlocker needs your recovery key to unlock your drive because
0x234D你电脑的配置已更改。在插入光盘或 USB 设备的情况下可能会出现此问题。移除光盘或 USB 设备并重新启动电脑可以修复此问题。 your PC's configuration has changed. This may have happened because a disc or USB device was inserted. Removing it and restarting your PC may fix this problem.
0x234E下列启动应用程序已经更改: %1。 the following boot application has changed: %1.
0x234F以下引导应用程序的引导配置数据设置 %1 已更改: %2。 the Boot Configuration Data setting %1 has changed for the following boot application: %2.
0x2350受信任的平台模块工作不正常。 the trusted platform module is not functioning correctly.
0x2351受信任的平台模块已禁用。 the trusted platform module is disabled.
0x2352受信任的平台模块无法访问。 the trusted platform module is not accessible.
0x2353分区表报告了一个无效分区大小。 the partition table reports an invalid partition size.
0x2354调试模式已经启用。 debugging mode has been enabled.
0x2355驱动程序签名强制已经禁用。 driver signature enforcement has been disabled.
0x2356未知错误。 of an unknown error.
0x2357为了保护数据隐私,BitLocker 已经阻止解锁你的驱动器。你需要输入恢复密钥。 To protect the privacy of your data, BitLocker has prevented the unlocking of your drive. You'll need to enter your recovery key.
0x2359允许的尝试次数有限制。 There is a limit on the number of attempts allowed.
0x235A若要重新引导并重试,请按 Enter。按 Esc 可获得其他恢复选项。 To reboot and try again, press Enter. For other recovery options, press Esc.
0x235B找到你启用 BitLocker 时使用的 U 盘。 Find the USB drive you used when you turned on BitLocker.
0x235C使用数字键或功能键 F1-F10 (使用 F10 相当于使用 0)。 Use the number keys or function keys F1-F10 (use F10 for 0).
0x235E按 Insert 键在你键入时查看 PIN。 Press the Insert key to see the PIN as you type.
0x235F按 Insert 键在你键入时查看密码。 Press the Insert key to see the password as you type.
0x2360按 Insert 键在你键入时隐藏 PIN。 Press the Insert key to hide the PIN as you type.
0x2361按 Insert 键在你键入时隐藏密码。 Press the Insert key to hide the password as you type.
0x2362恢复密钥 ID: Recovery key ID:
0x2364密钥文件名: Key filename:
0x2365按 Enter 继续 Press Enter to continue
0x2366按 Enter 重新启动后再试一次 Press Enter to reboot and try again
0x2367按 Esc 可进行 BitLocker 恢复 Press Esc for BitLocker recovery
0x2368按 Esc 获得其他恢复选项 Press Esc for more recovery options
0x2369按 Esc 或 Windows 键即可恢复 Press Esc or the Windows key for recovery
0x236A按 Esc 或 Windows 键可获得其他恢复选项 Press Esc or the Windows key for more recovery options
0x236B按 F11 可选择一个备用操作系统 Press F11 to choose an alternate operating system
0x236CBM_FVE_EMPTY_STRING BM_FVE_EMPTY_STRING
0x236D已禁用安全启动。必须重新启用安全启动或者必须暂停 BitLocker,Windows 才能正常启动。 Secure Boot has been disabled. Either Secure Boot must be re-enabled, or BitLocker must be suspended for Windows to start normally.
0x236E安全启动策略已被意外更改。 Secure Boot policy has unexpectedly changed.
0x236F由于过多次输入了错误的密码,因此已触发设备锁定。 Device Lock has been triggered due to too many incorrect password attempts.
0x2370BitLocker 恢复 BitLocker recovery
0x2371按 Enter 或 Windows 键继续 Press Enter or the Windows key to continue
0x2372此操作系统使用物理地址扩展功能支持具有超过 4 GB RAM 的系统。你需要使用具有兼容处理器的电脑才能运行该操作系统。 This operating system uses the Physical Address Extension feature to support systems with more than 4 GB of RAM. You'll need to use a PC with a compatible processor to run the operating system.
0x2373操作系统的一个组件已过期。 A component of the operating system has expired.
0x00002710请稍候 Please wait
0x00002711正在准备自动修复 Preparing Automatic Repair
0x00002712正在准备系统映像恢复 Preparing System Image Recovery
0x00002713正在准备命令提示符 Preparing Command Prompt
0x00002714正在准备系统还原 Preparing system restore
0x00002715正在准备 Preparing
0x00002716Hyper-V Hyper-V
0x00002717
0x00002718多播服务器 Multicast Server
0x0000271A正在准备 BitLocker 恢复 Preparing BitLocker recovery
0x0000271B来自 PXE 服务器的 Windows 引导配置数据 (BCD) 文件不包含有效的操作系统项。请确保该服务器已为此体系结构安装引导映像。 The Windows Boot Configuration Data (BCD) file from the PXE server does not contain a valid operating system entry. Ensure that the server has boot images installed for this architecture.
0x00004E20恢复 Recovery
0x00004E21你的电脑/设备需要修复 Your PC/Device needs to be repaired
0x00004E22你的电脑上没有其他 BitLocker 恢复选项 There are no more BitLocker recovery options on your PC
0x00004E23将设备连接至你的电脑时出错。 There was a problem with a device connected to your PC
0x00004E24你需要使用恢复工具。如果没有任何安装介质(例如光盘或 USB 设备),请联系你的电脑管理员或电脑/设备制造商。 You'll need to use recovery tools. If you don't have any installation media (like a disc or USB device), contact your PC administrator or PC/Device manufacturer.
0x00004E25移动正在使用或出现故障的可移动存储设备时会出现此问题。正确连接任何可移动存储并重新启动电脑可以修复此问题。 This problem can happen when a removable storage device is removed while it's in use or is failing. Properly connecting any removable storage and restarting your PC may fix this problem.
0x00004E26选择以下选项之一以解决此问题。 Choose one of the options below to address this problem.
0x00004E27按 Windows 键可进行恢复 Press the Windows key for recovery
0x00004E28按 Esc 可进行恢复 Press Esc for recovery
0x00004E29按 Windows 键可使用其他操作系统 Press the Windows key to use a different operating system
0x00004E2A按 F9 可使用其他操作系统 Press F9 to use a different operating system
0x00004E2B按 Windows 键可重试 Press the Windows key to try again
0x00004E2C按 Enter 可重试 Press Enter to try again
0x00004E2D文件: File:
0x00004E2E源: Source:
0x00004E2F行: Line:
0x00004E30错误代码: Error code:
0x00004E31无法正常启动你的电脑 Your PC couldn't start properly
0x00004E32无法正常关闭你的电脑 Your PC couldn't turn off properly
0x00004E33按 F8 以指定启动设置 Press F8 for Startup Settings
0x00004E34有关如何取回此密钥的详细信息,请从其他电脑或移动设备访问 %1。 For more information on how to retrieve this key, go to %1 from another PC or mobile device.
0x00004E35按 Esc 以指定 UEFI 固件设置 Press Esc for UEFI Firmware Settings
0x00004E36按 Windows 键以指定 UEFI 固件设置 Press the Windows key for UEFI Firmware Settings
0x00004E37:( :(
0x00004E39无法启动项目,因为它需要重新启动之前会被阻止的系统功能。请重新启动计算机或设备。 The entry cannot be launched because it requires system capabilities that are blocked until reboot. Please reboot the computer or device.

EXIF

File Name:bootmgfw.efi.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-b..nager-efi.resources_31bf3856ad364e35_10.0.15063.0_zh-cn_ef72388408dd81e9\
File Size:62 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:2008:10:10 02:57:06+03:00
PE Type:PE32
Linker Version:9.0
Code Size:0
Initialized Data Size:54784
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:5.0
Image Version:0.0
Subsystem Version:5.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Executable application
File Subtype:0
Language Code:Chinese (Simplified)
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:Boot Manager
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:bootmgr.exe
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:bootmgr.exe
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0

What is bootmgfw.efi.mui?

bootmgfw.efi.mui is Multilingual User Interface resource file that contain Chinese (Simplified) language for file bootmgfw.efi (Boot Manager).

File version info

File Description:Boot Manager
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:bootmgr.exe
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:bootmgr.exe
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x804, 1200