1102 | Wired AutoConfig |
Wired AutoConfig |
1103 | 有线自动配置(DOT3SVC)服务负责对以太网接口执行 IEEE 802.1X 身份验证。如果当前有线网络部署强制执行 802.1X 身份验证,则应配置 DOT3SVC 服务运行以用于建立第 2 层连接性和/或用于提供对网络资源的访问权限。DOT3SVC 服务会影响到强制执行 802.1X 身份验证的有线网络。 |
The Wired AutoConfig (DOT3SVC) service is responsible for performing IEEE 802.1X authentication on Ethernet interfaces. If your current wired network deployment enforces 802.1X authentication, the DOT3SVC service should be configured to run for establishing Layer 2 connectivity and/or providing access to network resources. Wired networks that do not enforce 802.1X authentication are unaffected by the DOT3SVC service. |
1104 | 自动配置版本: |
AutoConfig Version: |
1105 | 802.1x: 非强制的 |
802.1x: Not Enforced |
1106 | 802.1x: 强制的 |
802.1x: Enforced |
1107 | 802.1x: 已禁用 |
802.1x: Disabled |
1108 | 802.1x: 已启用 |
802.1x: Enabled |
1109 | 否 |
No |
1110 | 是 |
Yes |
1111 | 计算机或用户凭据 |
Machine or user credential |
1112 | 计算机凭据 |
Machine credential |
1113 | 用户凭据 |
User credential |
1114 | 来宾凭据 |
Guest credential |
1115 | 未指定 |
Not specified |
1116 | EAP-MD5 |
EAP-MD5 |
1117 | EAP-TLS |
EAP-TLS |
1118 | PEAP |
PEAP |
1119 | MSCHAP v2 |
MSCHAP v2 |
1120 | 未知 |
Unknown |
1121 | EAP 类型: |
EAP type: |
1122 | 缓存用户信息: |
Cache user information: |
1123 | 802.1X 身份验证凭据: |
802.1X auth credential: |
0x50000002 | 错误 |
Error |
0x50000003 | 警告 |
Warning |
0x50000004 | 信息 |
Information |
0x70000001 | DeviceLayer |
DeviceLayer |
0x70000002 | MSM |
MSM |
0x70000003 | AutoConf |
AutoConf |
0x90000001 | Microsoft-Windows-Wired-AutoConfig |
Microsoft-Windows-Wired-AutoConfig |
0x90000002 | Microsoft-Windows-Wired-AutoConfig/Operational |
Microsoft-Windows-Wired-AutoConfig/Operational |
0x90000003 | Microsoft-Windows-Wired-AutoConfig/Diagnostic |
Microsoft-Windows-Wired-AutoConfig/Diagnostic |
0xB00032DD | 未尝试预登录连接。%n%n结果: %1%n原因: %2%n |
A pre-logon connection was not attempted.%n%nResult: %1%nReason: %2%n |
0xB00032DE | 已尝试预登录连接。%n%n结果: %1%n接口 GUID: %2%n请求的字段: %3%n |
A pre-logon connection was attempted.%n%nResult: %1%nInterface GUID: %2%nRequested Fields: %3%n |
0xB00032E7 | 未尝试后登录连接。%n%n结果: %1%n原因: %2%n |
A post-logon connection was not attempted.%n%nResult: %1%nReason: %2%n |
0xB00032E8 | 已尝试后登录连接。%n%n结果: %1%n接口 GUID: %2%n |
A post-logon connection was attempted.%n%nResult: %1%nInterface GUID: %2%n |
0xB00032E9 | 后登录连接尝试已完成。%n%n网络连接尝试结果: %1%n原因: %2%n接口 GUID: %3%n |
The post-logon connection attempt is complete.%n%nNetwork connection attempt result: %1%nReason: %2%nInterface GUID: %3%n |
0xB0003C8C | 网络适配器已拔出。%n%n%t网络适配器: %2%n%t接口 GUID: %1 |
The network adapter has been unplugged.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1 |
0xB0003C8D | 已连接网络适配器。%n%n%t网络适配器: %2%n%t接口 GUID: %1 |
The network adapter has been connected.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1 |
0xB0003C8E | 配置文件已应用于网络适配器。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t配置文件类型: %3%n%t配置文件内容: %4 |
The profile was applied on the network adapter.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tProfile Type: %3%n%tProfile Content: %4 |
0xB0003C8F | 已启动有线 802.1X 身份验证。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t连接 ID: %3 |
Wired 802.1X Authentication was started.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tConnection ID: %3 |
0xB0003C90 | 已重新启动有线 802.1X 身份验证。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t连接 ID: %3%n%t重新启动原因: %4 |
Wired 802.1X Authentication was restarted.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tConnection ID: %3%n%tRestart Reason: %4 |
0xB0003C91 | 有线 802.1X 身份验证成功。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t对等地址: %3%n%t本地地址: %4%n%t连接 ID: %5%n%t标识: %6%n%t用户: %7%n%t域: %8%n%t原因: %9%n%t原因文本: %10%n%t错误代码: %11 |
Wired 802.1X Authentication succeeded.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tPeer Address: %3%n%tLocal Address: %4%n%tConnection ID: %5%n%tIdentity: %6%n%tUser: %7%n%tDomain: %8%n%tReason: %9%n%tReason Text: %10%n%tError Code: %11 |
0xB0003C92 | 该网络适配器上的网络身份验证尝试已暂停。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t原因代码: %3%n%t阻止计时器的时长(秒): %4 |
Network authentication attempts have been temporarily suspended on this network adapter.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tReason Code: %3%n%tLength of block timer (seconds): %4 |
0xB0003C93 | 该网络适配器上的网络身份验证尝试已恢复。%n%n%t网络适配器: %2%n%t接口 GUID: %1 |
Network authentication attempts have been resumed on this network adapter.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1 |
0xB0003C94 | 该网络适配器上的 NDIS 端口状态已更改。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%tNDIS 控制状态: %3%n%tNDIS 身份验证状态: %4 |
There has been an NDIS Port state change on this network adapter.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tNDIS Control State: %3%n%tNDIS Auth State: %4 |
0xB0003C95 | 已标识网络适配器上的操作状态。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t服务状态: %3 |
The operational state on the network adapter was identified.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tService State: %3 |
0xB0003C96 | 网络适配器已添加到系统中。%n%n%t网络适配器: %2%n%t接口 GUID: %1 |
A network adapter was added to the system.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1 |
0xB0003C97 | 有线自动配置服务进入运行状态。 |
The Wired AutoConfig service entered the running state. |
0xB0003C98 | 有线自动配置服务进入停止状态。 |
The Wired AutoConfig service entered the stopped state. |
0xB0003C99 | 已从系统中取出网络适配器。%n%n%t网络适配器: %2%n%t接口 GUID: %1 |
A network adapter was removed from the system.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1 |
0xB0003C9A | 有线 802.1X 身份验证失败。%n%n%t网络适配器: %2%n%t接口 GUID: %1%n%t对等地址: %3%n%t本地地址: %4%n%t连接 ID: %5%n%t标识: %6%n%t用户: %7%n%t域: %8%n%t原因: %9%n%t原因文本: %10%n%t错误代码: %11 |
Wired 802.1X Authentication failed.%n%n%tNetwork Adapter: %2%n%tInterface GUID: %1%n%tPeer Address: %3%n%tLocal Address: %4%n%tConnection ID: %5%n%tIdentity: %6%n%tUser: %7%n%tDomain: %8%n%tReason: %9%n%tReason Text: %10%n%tError Code: %11 |
0xB0003C9B | 有线自动配置服务正在启动。 |
The Wired AutoConfig service is starting. |
0xB0003C9C | 有线自动配置服务正在停止。 |
The Wired AutoConfig service is stopping. |
0xB0004E21 | 没有交互的控制台会话发送 UI 请求 |
No interactive console session to send UI request |
0xB0004E22 | ACM: IntfCompleteTimely 失败,错误为 %1 |
ACM: IntfCompleteTimely failed, error %1 |
0xB0004E23 | 没有可用的连接 |
There are no available connections |
0xB0004E24 | MSM 无法初始化接口,错误为 %1。 |
MSM failed to initialize the interface, error %1. |
0xB0004E25 | 无法加载配置文件,错误为 %1。 |
Failed to load profile, error %1. |
0xB0004E26 | 没有在 db 中找到配置文件,错误为 %1 |
No profile found in db, error %1 |
0xB0004E27 | ACM: 无法发送 UI 请求。 |
ACM: UI request could not be sent. |
0xB0004E28 | IntfCompletePlap 失败,错误为 %1。 |
IntfCompletePlap failed, error %1. |
0xB0004E29 | 接口没有任何可用的网络 |
Interface does not have any available networks |
0xB0004E2A | 适配器 %1 的状态无效。 |
Invalid state of the adapter %1. |
0xB0004E2B | 介质已断开连接,无法执行 SSO |
Media is disconnected, SSO can't be done |
0xB0004E2C | 无法成为 PLAP 运行时状态,错误为 %1 |
Failed to make the PLAP runtime state , error %1 |
0xB0004E2D | 无法成为实时运行时状态,错误为 %1。 |
Failed to make the timely runtime state , error %1. |
0xB0004E2E | 接口没有配置文件 |
Interface does not have a profile |
0xB0004E2F | OneXSetEapUserData 失败,错误为 %1。 |
OneXSetEapUserData failed, error %1. |
0xB0004E30 | AcmQueryUserDataProperties 失败,错误为 %1。 |
AcmQueryUserDataProperties failed, error %1. |
0xB0004E31 | Dot3AcmQueryUserDataByGuid 失败,错误为 %1。 |
Dot3AcmQueryUserDataByGuid failed, error %1. |
0xB0004E32 | DsRoleGetPrimaryDomainInformation 失败,错误为 %1 |
DsRoleGetPrimaryDomainInformation failed, error %1 |
0xB0004E33 | 适配器已连接,我们有一个有效的 IP |
Adapter is connected , we have a valid IP |
0xB0004E34 | 没有时间等待 DC 连接。立即返回 |
Don't have time to wait for DC connectivity. Returning now |
0xB0004E35 | 正在等待 DC 连接 |
Waiting for DC connectivity |
0xB0004E36 | 等待 IP 地址更改成功完成 |
Wait for ip address change successfully completed |
0xB0004E38 | 等待 IP 地址更改超时 |
Wait for ip address change timed out |
0xB0004E39 | 等待 IP 地址更改失败,错误为(%1) |
Wait for ip address change failed with error (%1) |
0xB0004E3A | 正在等待 IP 地址更改通知 |
Waiting for ip address change notification |
0xB0004E3C | 等待 1x 完成成功完成 |
Wait for 1x completion successfully completed |
0xB0004E3D | 适配器未连接。立即返回。 |
Adapter not connected. Returning now. |
0xB0004E3E | 已完成 1x,但出现故障 %1 |
1x completed with a failure %1 |
0xB0004E3F | 等待 1x 完成失败,并返回代码(%1) |
Wait for 1x completion failed with return code (%1) |
0xB0004E40 | 等待 1x 完成超时 |
Wait for 1x completion timed out |
0xB0004E41 | IntfDoTimely 花费的时间比允许的超时长。立即返回 |
IntfDoTimely took longer than our timeout allows. Returning now |
0xB0004E42 | IntfDoTimely 成功完成 |
IntfDoTimely completed successfully |
0xB0004E43 | IntfDoTimely 失败,错误为 %1 |
IntfDoTimely failed, error %1 |
0xB0004E44 | 找不到 TIMELY 配置文件。正在完成实时处理 |
No TIMELY profiles were found. Completing the timely processing |
0xB0004E45 | Timely1x - 接口 %1,配置文件 %3 - 启动 %4,停止 %5 |
Timely1x - Interface %1, profile %3 - Start %4, Stop %5 |
0xB0004E46 | FindTimelyIntfAndProfile 失败,错误为 %1 |
FindTimelyIntfAndProfile failed, error %1 |
0xB0005209 | DeviceLayerOpenHandle 失败,错误为 %1 |
DeviceLayerOpenHandle failed, Error %1 |
0xB000520A | DeviceLayerQueryOID 失败 %1,OID %3 |
DeviceLayerQueryOID failed %1, OID %3 |
0xB000520B | DeviceLayerSetOID 失败 %1,OID %3 |
DeviceLayerSetOID failed %1, OID %3 |
0xB000520C | DeviceLayerSendPacket 失败,%1 |
DeviceLayerSendPacket failed, %1 |
0xB000520D | DeviceLayerReceivePacket 失败,%1 |
DeviceLayerReceivePacket failed, %1 |
0xB000520E | 数据包仅 %4 个字节,跳过 |
Packet only %4 bytes, skipped |
0xB000520F | 数据包类型 %4 无效,跳过 |
Invalid packet type %4, skipped |
0xB0005210 | 读取请求被取消 |
The read request was cancelled |
0xB0005211 | 接收数据错误 %1 |
Receiving data error %1 |
0xB0005212 | 跳过数据包,错误为 %1 |
Packet skipped, error %1 |
0xB0005213 | 发送数据失败,错误为 %1 |
Send data failed, error %1 |
0xB0005214 | 接口(%4): pAcmConnectionProgress 失败 %1 |
Interface(%4): pAcmConnectionProgress failed %1 |
0xB0005215 | 接口(%4): pAcmQueryUserData 失败 %1 |
Interface(%4): pAcmQueryUserData failed %1 |
0xB0005216 | 接口(%4): pAcmSetMsmProfile 失败 %1 |
Interface(%4): pAcmSetMsmProfile failed %1 |
0xB0005217 | 接口(%4): pAcmSetUserData 失败 %1 |
Interface(%4): pAcmSetUserData failed %1 |
0xB0005218 | 接口(%4): pAcmMsmNotify 失败 %1 |
Interface(%4): pAcmMsmNotify failed %1 |
0xB0005219 | 接口(%4): pAcmMediaChange 失败,错误为 %1 |
Interface(%4): pAcmMediaChange failed, error %1 |
0xB000521A | 接口(%4): pAcmUIRequest 失败 %1 |
Interface(%4): pAcmUIRequest failed %1 |
0xB000521B | 接口(%4): pAcmConnectionCompletionRoutine 失败 %1 |
Interface(%4): pAcmConnectionCompletionRoutine failed %1 |
0xB000521C | 接口(%1): 状态转换 %3 -- %4 |
Interface(%1): State Transition %3 -- %4 |
0xB000521D | 接口(%4): 已从 1x 收到 AuthNotStarted 结果 |
Interface(%4): Received AuthNotStarted result from 1x |
0xB000521E | 接口(%4): 已从 1x 收到 AuthInvalid 结果 |
Interface(%4): Received AuthInvalid result from 1x |
0xB000521F | 接口(%1): 开始处理事件: (%3) |
Interface(%1): Start processing event: (%3) |
0xB0005220 | 接口(%1): 已完成处理事件: (%3) |
Interface(%1): Completed processing event: (%3) |
0xB0005221 | 接口(%4): StartOneXAuth 失败 %1 |
Interface(%4): StartOneXAuth failed %1 |
0xB0005222 | 接口(%4): SendOneXPacket 失败 %1 |
Interface(%4): SendOneXPacket failed %1 |
0xB0005223 | 接口(%4): 802.1x 身份验证超时 |
Interface(%4): TIMING OUT 802.1x Authentication |
0xB0005224 | 接口(%4): 802.1x 身份验证未超时,%3 毫秒后下一个计时器 |
Interface(%4): NOT TIMING OUT 802.1x authentication, next timer in %3 msec |
0xB0005225 | 接口(%4): DeviceLayerGetCurrentMediaState 失败 %1 |
Interface(%4): DeviceLayerGetCurrentMediaState failed %1 |
0xB0005226 | 不存在 1X 端口。忽略接收的数据包 |
No 1X port exists. Ignoring the packet received |
0xB0005227 | 接口(%1): 将交换机 MAC 地址设置为 %2 |
Interface(%1): Set the SWITCH MAC address to %2 |
0xB0005228 | 接口(%4): OpenDeviceHandle 失败 %1 |
Interface(%4): OpenDeviceHandle failed %1 |
0xB0005229 | 接口(%1): 开始处理事件(%3) |
Interface(%1): Start processing event (%3) |
0xB000522A | 接口(%1): ProcessDot3MsmEvent: Dot3MsmPerformStateMachineProcessing 失败(%4),事件=%3 |
Interface(%1): ProcessDot3MsmEvent: Dot3MsmPerformStateMachineProcessing FAILed (%4), Event=%3 |
0xB000522B | 接口(%1): 已完成处理事件(%3) |
Interface(%1): Completed processing event (%3) |
0xB000522C | 已完成初始化 ID 为 %1 且友好名称为 %2 的新接口 |
Finished initializing a new interface with id = %1 and friendly name = %2 |
0xB000522D | Dot3MsmInit 失败 %1 |
Dot3MsmInit failed %1 |
0xB000522E | Dot3MSMInitAdapter 失败 %1 |
Dot3MSMInitAdapter failed %1 |
0xB000522F | 无法分析原始请求 %1 |
Failed to parse original request %1 |
0xB0005230 | 无法分析 UI 响应 %1 |
Failed to parse UI Response %1 |
0xB0005231 | 接口(%4): OneXUIResponse 失败 %1 |
Interface(%4): OneXUIResponse failed %1 |
0xB0005232 | 接口(%4): Dot3MsmQueryPendingUIRequest 失败 %1 |
Interface(%4): Dot3MsmQueryPendingUIRequest failed %1 |
0xB0005233 | OneXValidateProfile 失败 %1 |
OneXValidateProfile failed %1 |
0xD0000001 | 已断开连接 |
Disconnected |
0xD0000002 | 正在连接 |
Connecting |
0xD0000003 | 已连接 |
Connected |
0xD0000004 | ConnectionFailure |
ConnectionFailure |
0xD0000005 | 正在进行身份验证 |
Authenticating |
0xD0000006 | 已通过身份验证 |
Authenticated |
0xD0000007 | AuthenticationFailed |
AuthenticationFailed |
0xD0000008 | AuthenticaorNotFound |
AuthenticaorNotFound |
0xD0000009 | OneXDisabled |
OneXDisabled |
0xD000000A | 失败 |
Failure |
0xD000000B | 本地:UCT |
Local:UCT |
0xD000000C | 本地:连接 |
Local:Connect |
0xD000000D | 本地:断开连接 |
Local:Disconnect |
0xD000000E | 本地:MediaConnect |
Local:MediaConnect |
0xD000000F | 本地:MediaDisconnect |
Local:MediaDisconnect |
0xD0000010 | 本地:ConnectTimeout |
Local:ConnectTimeout |
0xD0000011 | 本地:AuthInProgress |
Local:AuthInProgress |
0xD0000012 | 本地:AuthRestarted |
Local:AuthRestarted |
0xD0000013 | 本地:AuthSuccess |
Local:AuthSuccess |
0xD0000014 | 本地:AuthFailure |
Local:AuthFailure |
0xD0000015 | 本地:PeerNotFoundOneXEnforced |
Local:PeerNotFoundOneXEnforced |
0xD0000016 | 本地:PeerNotFoundOneXNotEnforced |
Local:PeerNotFoundOneXNotEnforced |
0xD0000017 | 本地:OneXDisabledNotEnforced |
Local:OneXDisabledNotEnforced |
0xD0000018 | 本地:OneXDisabledEnforced |
Local:OneXDisabledEnforced |
0xD0000019 | 本地:OneXEnabled |
Local:OneXEnabled |
0xD000001A | 本地:OneXOuterTimerExpired |
Local:OneXOuterTimerExpired |
0xD000001B | 本地:OneXReAuthenticate |
Local:OneXReAuthenticate |
0xD000001C | 本地:SetRuntimeState |
Local:SetRuntimeState |
0xD000001D | 全局:连接 |
Global:Connect |
0xD000001E | Global:Disconnect |
Global:Disconnect |
0xD000001F | Global:MediaConnect |
Global:MediaConnect |
0xD0000020 | Global:MediaDisconnect |
Global:MediaDisconnect |
0xD0000021 | Global:OneXResult |
Global:OneXResult |
0xD0000022 | Global:Timeout |
Global:Timeout |
0xD0000023 | Global:ReAuthenticate |
Global:ReAuthenticate |
0xD0000024 | Global:SetRuntimeState |
Global:SetRuntimeState |
0xD0000025 | 接口 |
Interface |
0xD0000026 | 组策略 |
Group Policy |
0xD0000027 | 默认 |
Default |
0xD0000028 | 控制的 |
Controlled |
0xD0000029 | 非控制的 |
UnControlled |
0xD000002A | 已授权 |
Authorized |
0xD000002B | 未授权 |
UnAuthorized |
0xD000002C | 已禁用 |
Disabled |
0xD000002D | 已启用 |
Enabled |
0xD000002E | 不满足操作条件。 |
The operational criteria were not met. |
0xD000002F | 满足操作条件。 |
The operational criteria were met. |
0xD0000030 | 没有将该计算机加入域。 |
The machine was not joined to a domain. |
0xD0000031 | 未插入以太网电缆。 |
The Ethernet cable is not plugged in. |
0xD0000032 | 已配置的 EAP 方法不支持单一登录操作。 |
The configured EAP Method does not support single sign on operations. |
0xD0000033 | 已配置的 EAP 方法已将配置文件标识为不能预登录。 |
The configured EAP method has identified the profile as incapable of pre-logon. |
0xD0000034 | 出现不明 EAP 错误。 |
An unspecified EAP error has occurred. |
0xD0000035 | 智能卡读卡器不存在 |
Smart card Reader not present |
0xD0000036 | 不存在智能卡 |
No Smard card present |
0xD0000037 | 成功 |
Success |
0xD000003B | 成功。 |
Success. |
0xD000003C | 无法在分配的时间内建立网络连接。 |
Failed to establish a network connection within the allotted time. |
0xD000003D | 无法建立网络连接。 |
Failed to establish a network connection. |
0xD000003E | 无法在分配的时间内与域控制器联系。 |
Failed to contact a domain controller within the allotted time. |
0xD000003F | 无法在分配的时间内与域控制器联系并获取 TCP/IP 地址。 |
Failed to contact a domain controller and obtain a TCP/IP address within the allotted time. |
0xD0000041 | 没有后登录网络配置文件。 |
There are no post-logon network profiles. |