NetTCPIP.dll.mui TCPIP WMI Provider aa1d6aeabeeb9c31e1a1325081b9c2cc

File info

File name: NetTCPIP.dll.mui
Size: 225792 byte
MD5: aa1d6aeabeeb9c31e1a1325081b9c2cc
SHA1: 8bf8c16d9930778dd6b6afd56a43d97d6be0c240
SHA256: 9184a363de273cf6473c7d124b4137d45c56ab07deaf2b449aace37b4a3da6c9
Operating systems: Windows 10
Extension: MUI

Translations messages and strings

If an error occurred or the following message in Finnish language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id Finnish English
1InstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below.
To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If not null and the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
If not set to null for DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
InstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below.
To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If not null and the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
If not set to null for DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
2The Caption property is a short textual description (one- line string) of the object. The Caption property is a short textual description (one- line string) of the object.
3The Description property provides a textual description of the object. The Description property provides a textual description of the object.
4A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.
Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.
A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information.
Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.
52.19.0 2.19.0
6ManagedElement is an abstract class that provides a common superclass (or top of the inheritance tree) for the non-association classes in the CIM Schema. ManagedElement is an abstract class that provides a common superclass (or top of the inheritance tree) for the non-association classes in the CIM Schema.
7Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following \'preferred\' algorithm:
:
Where and are separated by a colon \':\', and where MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity creating/defining the InstanceID, or is a registered ID that is assigned to the business entity by a recognized global authority. (This is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness MUST NOT contain a colon (\':\'). When using this algorithm, the first colon to appear in InstanceID MUST appear between and .
is chosen by the business entity and SHOULD not be re-used to identify different underlying (real-world) elements. If the above \'preferred\' algorithm is not used, the defining entity MUST assure that the resultant InstanceID is not re-used across any InstanceIDs produced by this or other providers for this instance\'s NameSpace.
For DMTF defined instances, the \'preferred\' algorithm MUST be used with the set to \'CIM\'.
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following \'preferred\' algorithm:
:
Where and are separated by a colon \':\', and where MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity creating/defining the InstanceID, or is a registered ID that is assigned to the business entity by a recognized global authority. (This is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness MUST NOT contain a colon (\':\'). When using this algorithm, the first colon to appear in InstanceID MUST appear between and .
is chosen by the business entity and SHOULD not be re-used to identify different underlying (real-world) elements. If the above \'preferred\' algorithm is not used, the defining entity MUST assure that the resultant InstanceID is not re-used across any InstanceIDs produced by this or other providers for this instance\'s NameSpace.
For DMTF defined instances, the \'preferred\' algorithm MUST be used with the set to \'CIM\'.
8The address which serves as the destination to be reached. The address which serves as the destination to be reached.
9The specific administrative distance of this route, overriding any default distances specified by the system or routing service. The specific administrative distance of this route, overriding any default distances specified by the system or routing service.
10RouteMetric provides a numeric indication as to the preference of this route, compared to other routes that reach the same destination. RouteMetric provides a numeric indication as to the preference of this route, compared to other routes that reach the same destination.
11TRUE indicates that this is a static route, and FALSE indicates a dynamically-learned route. TRUE indicates that this is a static route, and FALSE indicates a dynamically-learned route.
12An enumerated integer indicating whether the route is administrator-defined (value=2), computed (via a routing protocol/algorithm, value=3) or the actual route implemented in the network (value=4). The default is a computed route. An enumerated integer indicating whether the route is administrator-defined (value=2), computed (via a routing protocol/algorithm, value=3) or the actual route implemented in the network (value=4). The default is a computed route.
13Administrator Defined Route Administrator Defined Route
14Computed Route Computed Route
15Actual Route Actual Route
16NextHopRoute represents one of a series of \'hops\' to reach a network destination. A route is administratively defined, or calculated/learned by a particular routing process. A ConcreteDependency associaton may be instantiated between a route and its routing service to indicate this. (In this scenario, the route is dependent on the service.) NextHopRoute represents one of a series of \'hops\' to reach a network destination. A route is administratively defined, or calculated/learned by a particular routing process. A ConcreteDependency associaton may be instantiated between a route and its routing service to indicate this. (In this scenario, the route is dependent on the service.)
17The destination prefix. The destination prefix.
18The user-friendly interface index. The user-friendly interface index.
19The user-friendly interface name. The user-friendly interface name.
20The next hop address or gateway address. The next hop address or gateway address.
21One of the following values: No: Not advertised in Route Advertisements. This is the default. Age: Advertised in Route Advertisements with a finite lifetime. Yes: Advertised in Route Advertisements with an infinite lifetime. One of the following values: No: Not advertised in Route Advertisements. This is the default. Age: Advertised in Route Advertisements with a finite lifetime. Yes: Advertised in Route Advertisements with an infinite lifetime.
22No No
23Age Age
24Yes Yes
25Lifetime over which the route is valid. The default value is infinite. Lifetime over which the route is valid. The default value is infinite.
26Lifetime over which the route is preferred. The default value is infinite. Lifetime over which the route is preferred. The default value is infinite.
27One of the following values: Active: Change only lasts until next boot. Persistent: Change is persistent. This is the default. One of the following values: Active: Change only lasts until next boot. Persistent: Change is persistent. This is the default.
28Persistent Persistent
29Active Active
30To indicate whether the address family for this route is v4 or v6. To indicate whether the address family for this route is v4 or v6.
31IPv4 IPv4
32IPv6 IPv6
33The routing mechanism via which this route was learned. The routing mechanism via which this route was learned.
34Other Other
35Local Local
36NetMgmt NetMgmt
37Icmp Icmp
38Egp Egp
39Ggp Ggp
40Hello Hello
41Rip Rip
42IsIs IsIs
43EsIs EsIs
44Igrp Igrp
45Bbn Bbn
46Ospf Ospf
47Bgp Bgp
48Idpr Idpr
49Eigrp Eigrp
50Dvmrp Dvmrp
51Rpl Rpl
52Dhcp Dhcp
53The compartment in which route(s) are located. The compartment in which route(s) are located.
54State of the route. State of the route.
55Alive Alive
56Dead Dead
57Probe Probe
58The metric of the route's interface. The metric of the route's interface.
59Create the Route. Create the Route.
60Finds the best local IP address and best route to reach the specified remote address. Finds the best local IP address and best route to reach the specified remote address.
61Represents the Route class in TCPIP WMIv2 provider. Represents the Route class in TCPIP WMIv2 provider.
62A datetime value that indicates when the object was installed. Lack of a value does not indicate that the object is not installed. A datetime value that indicates when the object was installed. Lack of a value does not indicate that the object is not installed.
63The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property. The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
64Indicates the current statuses of the element. Various operational statuses are defined. Many of the enumeration\'s values are self-explanatory. However, a few are not and are described here in more detail.
"Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on.
"Predictive Failure" indicates that an element is functioning nominally but predicting a failure in the near future.
"In Service" describes an element being configured, maintained, cleaned, or otherwise administered.
"No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it.
"Lost Communication" indicates that the ManagedSystem Element is known to exist and has been contacted successfully in the past, but is currently unreachable.
"Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated.
"Dormant" indicates that the element is inactive or quiesced.
"Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
"Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error).
"Power Mode" indicates that the element has additional power model information contained in the Associated PowerManagementService association.
OperationalStatus replaces the Status property on ManagedSystemElement to provide a consistent approach to enumerations, to address implementation needs for an array property, and to provide a migration path from today\'s environment to the future. This change was not made earlier because it required the deprecated qualifier. Due to the widespread use of the existing Status property in management applications, it is strongly recommended that providers or instrumentation provide both the Status and OperationalStatus properties. Further, the first value of OperationalStatus should contain the primary status for the element. When instrumented, Status (because it is single-valued) should also provide the primary status of the element.
Indicates the current statuses of the element. Various operational statuses are defined. Many of the enumeration\'s values are self-explanatory. However, a few are not and are described here in more detail.
"Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on.
"Predictive Failure" indicates that an element is functioning nominally but predicting a failure in the near future.
"In Service" describes an element being configured, maintained, cleaned, or otherwise administered.
"No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it.
"Lost Communication" indicates that the ManagedSystem Element is known to exist and has been contacted successfully in the past, but is currently unreachable.
"Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated.
"Dormant" indicates that the element is inactive or quiesced.
"Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
"Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error).
"Power Mode" indicates that the element has additional power model information contained in the Associated PowerManagementService association.
OperationalStatus replaces the Status property on ManagedSystemElement to provide a consistent approach to enumerations, to address implementation needs for an array property, and to provide a migration path from today\'s environment to the future. This change was not made earlier because it required the deprecated qualifier. Due to the widespread use of the existing Status property in management applications, it is strongly recommended that providers or instrumentation provide both the Status and OperationalStatus properties. Further, the first value of OperationalStatus should contain the primary status for the element. When instrumented, Status (because it is single-valued) should also provide the primary status of the element.
65Unknown Unknown
66OK OK
67Degraded Degraded
68Stressed Stressed
69Predictive Failure Predictive Failure
70Error Error
71Non-Recoverable Error Non-Recoverable Error
72Starting Starting
73Stopping Stopping
74Stopped Stopped
75In Service In Service
76No Contact No Contact
77Lost Communication Lost Communication
78Aborted Aborted
79Dormant Dormant
80Supporting Entity in Error Supporting Entity in Error
81Completed Completed
82Power Mode Power Mode
83DMTF Reserved DMTF Reserved
84Vendor Reserved Vendor Reserved
85Strings describing the various OperationalStatus array values. For example, if "Stopping" is the value assigned to OperationalStatus, then this property may contain an explanation as to why an object is being stopped. Note that entries in this array are correlated with those at the same array index in OperationalStatus. Strings describing the various OperationalStatus array values. For example, if "Stopping" is the value assigned to OperationalStatus, then this property may contain an explanation as to why an object is being stopped. Note that entries in this array are correlated with those at the same array index in OperationalStatus.
86A string indicating the current status of the object. Various operational and non-operational statuses are defined. This property is deprecated in lieu of OperationalStatus, which includes the same semantics in its enumeration. This change is made for 3 reasons:
1) Status is more correctly defined as an array. This definition overcomes the limitation of describing status using a single value, when it is really a multi-valued property (for example, an element might be OK AND Stopped.
2) A MaxLen of 10 is too restrictive and leads to unclear enumerated values.
3) The change to a uint16 data type was discussed when CIM V2.0 was defined. However, existing V1.0 implementations used the string property and did not want to modify their code. Therefore, Status was grandfathered into the Schema. Use of the deprecated qualifier allows the maintenance of the existing property, but also permits an improved definition using OperationalStatus.
A string indicating the current status of the object. Various operational and non-operational statuses are defined. This property is deprecated in lieu of OperationalStatus, which includes the same semantics in its enumeration. This change is made for 3 reasons:
1) Status is more correctly defined as an array. This definition overcomes the limitation of describing status using a single value, when it is really a multi-valued property (for example, an element might be OK AND Stopped.
2) A MaxLen of 10 is too restrictive and leads to unclear enumerated values.
3) The change to a uint16 data type was discussed when CIM V2.0 was defined. However, existing V1.0 implementations used the string property and did not want to modify their code. Therefore, Status was grandfathered into the Schema. Use of the deprecated qualifier allows the maintenance of the existing property, but also permits an improved definition using OperationalStatus.
87Indicates the current health of the element. This attribute expresses the health of this element but not necessarily that of its subcomponents. The possible values are 0 to 30, where 5 means the element is entirely healthy and 30 means the element is completely non-functional. The following continuum is defined:
"Non-recoverable Error" (30) - The element has completely failed, and recovery is not possible. All functionality provided by this element has been lost.
"Critical Failure" (25) - The element is non-functional and recovery might not be possible.
"Major Failure" (20) - The element is failing. It is possible that some or all of the functionality of this component is degraded or not working.
"Minor Failure" (15) - All functionality is available but some might be degraded.
"Degraded/Warning" (10) - The element is in working order and all functionality is provided. However, the element is not working to the best of its abilities. For example, the element might not be operating at optimal performance or it might be reporting recoverable errors.
"OK" (5) - The element is fully functional and is operating within normal operational parameters and without error.
"Unknown" (0) - The implementation cannot report on HealthState at this time.
DMTF has reserved the unused portion of the continuum for additional HealthStates in the future.
Indicates the current health of the element. This attribute expresses the health of this element but not necessarily that of its subcomponents. The possible values are 0 to 30, where 5 means the element is entirely healthy and 30 means the element is completely non-functional. The following continuum is defined:
"Non-recoverable Error" (30) - The element has completely failed, and recovery is not possible. All functionality provided by this element has been lost.
"Critical Failure" (25) - The element is non-functional and recovery might not be possible.
"Major Failure" (20) - The element is failing. It is possible that some or all of the functionality of this component is degraded or not working.
"Minor Failure" (15) - All functionality is available but some might be degraded.
"Degraded/Warning" (10) - The element is in working order and all functionality is provided. However, the element is not working to the best of its abilities. For example, the element might not be operating at optimal performance or it might be reporting recoverable errors.
"OK" (5) - The element is fully functional and is operating within normal operational parameters and without error.
"Unknown" (0) - The implementation cannot report on HealthState at this time.
DMTF has reserved the unused portion of the continuum for additional HealthStates in the future.
88Degraded/Warning Degraded/Warning
89Minor failure Minor failure
90Major failure Major failure
91Critical failure Critical failure
92Non-recoverable error Non-recoverable error
93CommunicationStatus indicates the ability of the instrumentation to communicate with the underlying ManagedElement. CommunicationStatus consists of one of the following values: Unknown, None, Communication OK, Lost Communication, or No Contact.
A Null return indicates the implementation (provider) does not implement this property.
"Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
"Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
"Communication OK " indicates communication is established with the element, but does not convey any quality of service.
"No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it.
"Lost Communication" indicates that the Managed Element is known to exist and has been contacted successfully in the past, but is currently unreachable.
CommunicationStatus indicates the ability of the instrumentation to communicate with the underlying ManagedElement. CommunicationStatus consists of one of the following values: Unknown, None, Communication OK, Lost Communication, or No Contact.
A Null return indicates the implementation (provider) does not implement this property.
"Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
"Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
"Communication OK " indicates communication is established with the element, but does not convey any quality of service.
"No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it.
"Lost Communication" indicates that the Managed Element is known to exist and has been contacted successfully in the past, but is currently unreachable.
94Not Available Not Available
95Communication OK Communication OK
96DetailedStatus compliments PrimaryStatus with additional status detail. It consists of one of the following values: Not Available, No Additional Information, Stressed, Predictive Failure, Error, Non-Recoverable Error, SupportingEntityInError. Detailed status is used to expand upon the PrimaryStatus of the element.
A Null return indicates the implementation (provider) does not implement this property.
"Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
"No Additional Information" indicates that the element is functioning normally as indicated by PrimaryStatus = "OK".
"Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on.
"Predictive Failure" indicates that an element is functioning normally but a failure is predicted in the near future.
"Non-Recoverable Error " indicates that this element is in an error condition that requires human intervention.
"Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
DetailedStatus compliments PrimaryStatus with additional status detail. It consists of one of the following values: Not Available, No Additional Information, Stressed, Predictive Failure, Error, Non-Recoverable Error, SupportingEntityInError. Detailed status is used to expand upon the PrimaryStatus of the element.
A Null return indicates the implementation (provider) does not implement this property.
"Not Available" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
"No Additional Information" indicates that the element is functioning normally as indicated by PrimaryStatus = "OK".
"Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on.
"Predictive Failure" indicates that an element is functioning normally but a failure is predicted in the near future.
"Non-Recoverable Error " indicates that this element is in an error condition that requires human intervention.
"Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems.
97No Additional Information No Additional Information
98OperatingStatus provides a current status value for the operational condition of the element and can be used for providing more detail with respect to the value of EnabledState. It can also provide the transitional states when an element is transitioning from one state to another, such as when an element is transitioning between EnabledState and RequestedState, as well as other transitional conditions.
OperatingStatus consists of one of the following values: Unknown, Not Available, In Service, Starting, Stopping, Stopped, Aborted, Dormant, Completed, Migrating, Emmigrating, Immigrating, Snapshotting. Shutting Down, In Test
A Null return indicates the implementation (provider) does not implement this property.
"Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
"None" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
"Servicing" describes an element being configured, maintained, cleaned, or otherwise administered.
"Starting" describes an element being initialized.
"Stopping" describes an element being brought to an orderly stop.
"Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated.
"Dormant" indicates that the element is inactive or quiesced.
"Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded in the PrimaryStatus so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error).
"Migrating" element is being moved between host elements.
"Immigrating" element is being moved to new host element.
"Emigrating" element is being moved away from host element.
"Shutting Down" describes an element being brought to an abrupt stop.
"In Test" element is performing test functions.
"Transitioning" describes an element that is between states, that is, it is not fully available in either its previous state or its next state. This value should be used if other values indicating a transition to a specific state are not applicable.
"In Service" describes an element that is in service and operational.
OperatingStatus provides a current status value for the operational condition of the element and can be used for providing more detail with respect to the value of EnabledState. It can also provide the transitional states when an element is transitioning from one state to another, such as when an element is transitioning between EnabledState and RequestedState, as well as other transitional conditions.
OperatingStatus consists of one of the following values: Unknown, Not Available, In Service, Starting, Stopping, Stopped, Aborted, Dormant, Completed, Migrating, Emmigrating, Immigrating, Snapshotting. Shutting Down, In Test
A Null return indicates the implementation (provider) does not implement this property.
"Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
"None" indicates that the implementation (provider) is capable of returning a value for this property, but not ever for this particular piece of hardware/software or the property is intentionally not used because it adds no meaningful information (as in the case of a property that is intended to add additional info to another property).
"Servicing" describes an element being configured, maintained, cleaned, or otherwise administered.
"Starting" describes an element being initialized.
"Stopping" describes an element being brought to an orderly stop.
"Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated.
"Dormant" indicates that the element is inactive or quiesced.
"Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded in the PrimaryStatus so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error).
"Migrating" element is being moved between host elements.
"Immigrating" element is being moved to new host element.
"Emigrating" element is being moved away from host element.
"Shutting Down" describes an element being brought to an abrupt stop.
"In Test" element is performing test functions.
"Transitioning" describes an element that is between states, that is, it is not fully available in either its previous state or its next state. This value should be used if other values indicating a transition to a specific state are not applicable.
"In Service" describes an element that is in service and operational.
99Servicing Servicing
100Migrating Migrating
101Emigrating Emigrating
102Immigrating Immigrating
103Snapshotting Snapshotting
104Shutting Down Shutting Down
105In Test In Test
106Transitioning Transitioning
107PrimaryStatus provides a high level status value, intended to align with Red-Yellow-Green type representation of status. It should be used in conjunction with DetailedStatus to provide high level and detailed health status of the ManagedElement and its subcomponents.
PrimaryStatus consists of one of the following values: Unknown, OK, Degraded or Error. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
"OK" indicates the ManagedElement is functioning normally.
"Degraded" indicates the ManagedElement is functioning below normal.
"Error" indicates the ManagedElement is in an Error condition.
PrimaryStatus provides a high level status value, intended to align with Red-Yellow-Green type representation of status. It should be used in conjunction with DetailedStatus to provide high level and detailed health status of the ManagedElement and its subcomponents.
PrimaryStatus consists of one of the following values: Unknown, OK, Degraded or Error. "Unknown" indicates the implementation is in general capable of returning this property, but is unable to do so at this time.
"OK" indicates the ManagedElement is functioning normally.
"Degraded" indicates the ManagedElement is functioning below normal.
"Error" indicates the ManagedElement is in an Error condition.
108CIM_ManagedSystemElement is the base class for the System Element hierarchy. Any distinguishable component of a System is a candidate for inclusion in this class. Examples of system components include:
- software components such as application servers, databases, and applications
- operating system components such as files, processes, and threads
- device components such as disk drives, controllers, processors, and printers
- physical components such as chips and cards.
CIM_ManagedSystemElement is the base class for the System Element hierarchy. Any distinguishable component of a System is a candidate for inclusion in this class. Examples of system components include:
- software components such as application servers, databases, and applications
- operating system components such as files, processes, and threads
- device components such as disk drives, controllers, processors, and printers
- physical components such as chips and cards.
1092.22.0 2.22.0
110CIM_LogicalElement is a base class for all the components of a System that represent abstract system components, such as Files, Processes, or LogicalDevices. CIM_LogicalElement is a base class for all the components of a System that represent abstract system components, such as Files, Processes, or LogicalDevices.
1112.6.0 2.6.0
112A free-form string that represents the status of the job. The primary status is reflected in the inherited OperationalStatus property. JobStatus provides additional, implementation-specific details. A free-form string that represents the status of the job. The primary status is reflected in the inherited OperationalStatus property. JobStatus provides additional, implementation-specific details.
113The time that the Job was submitted to execute. A value of all zeroes indicates that the owning element is not capable of reporting a date and time. Therefore, the ScheduledStartTime and StartTime are reported as intervals relative to the time their values are requested. The time that the Job was submitted to execute. A value of all zeroes indicates that the owning element is not capable of reporting a date and time. Therefore, the ScheduledStartTime and StartTime are reported as intervals relative to the time their values are requested.
114The time that the current Job is scheduled to start. This time can be represented by the actual date and time, or an interval relative to the time that this property is requested. A value of all zeroes indicates that the Job is already executing. The property is deprecated in lieu of the more expressive scheduling properties, RunMonth, RunDay, RunDayOfWeek, and RunStartInterval. The time that the current Job is scheduled to start. This time can be represented by the actual date and time, or an interval relative to the time that this property is requested. A value of all zeroes indicates that the Job is already executing. The property is deprecated in lieu of the more expressive scheduling properties, RunMonth, RunDay, RunDayOfWeek, and RunStartInterval.
115The time that the Job was actually started. This time can be represented by an actual date and time, or by an interval relative to the time that this property is requested. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run time can be stored in this single-valued property. The time that the Job was actually started. This time can be represented by an actual date and time, or by an interval relative to the time that this property is requested. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run time can be stored in this single-valued property.
116The time interval that the Job has been executing or the total execution time if the Job is complete. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run time can be stored in this single-valued property. The time interval that the Job has been executing or the total execution time if the Job is complete. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run time can be stored in this single-valued property.
117The number of times that the Job should be run. A value of 1 indicates that the Job is not recurring, while any non-zero value indicates a limit to the number of times that the Job will recur. Zero indicates that there is no limit to the number of times that the Job can be processed, but that it is terminated either after the UntilTime or by manual intervention. By default, a Job is processed once. The number of times that the Job should be run. A value of 1 indicates that the Job is not recurring, while any non-zero value indicates a limit to the number of times that the Job will recur. Zero indicates that there is no limit to the number of times that the Job can be processed, but that it is terminated either after the UntilTime or by manual intervention. By default, a Job is processed once.
118The month during which the Job should be processed. Specify 0 for January, 1 for February, and so on. The month during which the Job should be processed. Specify 0 for January, 1 for February, and so on.
119January January
120February February
121March March
122April April
123May May
124June June
125July July
126August August
127September September
128October October
129November November
130December December
131The day in the month on which the Job should be processed. There are two different interpretations for this property, depending on the value of DayOfWeek. In one case, RunDay defines the day-in-month on which the Job is processed. This interpretation is used when the DayOfWeek is 0. A positive or negative integer indicates whether the RunDay should be calculated from the beginning or end of the month. For example, 5 indicates the fifth day in the RunMonth and -1 indicates the last day in the RunMonth.

When RunDayOfWeek is not 0, RunDay is the day-in-month on which the Job is processed, defined in conjunction with RunDayOfWeek. For example, if RunDay is 15 and RunDayOfWeek is Saturday, then the Job is processed on the first Saturday on or after the 15th day in the RunMonth (for example, the third Saturday in the month). If RunDay is 20 and RunDayOfWeek is -Saturday, then this indicates the first Saturday on or before the 20th day in the RunMonth. If RunDay is -1 and RunDayOfWeek is -Sunday, then this indicates the last Sunday in the RunMonth.
The day in the month on which the Job should be processed. There are two different interpretations for this property, depending on the value of DayOfWeek. In one case, RunDay defines the day-in-month on which the Job is processed. This interpretation is used when the DayOfWeek is 0. A positive or negative integer indicates whether the RunDay should be calculated from the beginning or end of the month. For example, 5 indicates the fifth day in the RunMonth and -1 indicates the last day in the RunMonth.

When RunDayOfWeek is not 0, RunDay is the day-in-month on which the Job is processed, defined in conjunction with RunDayOfWeek. For example, if RunDay is 15 and RunDayOfWeek is Saturday, then the Job is processed on the first Saturday on or after the 15th day in the RunMonth (for example, the third Saturday in the month). If RunDay is 20 and RunDayOfWeek is -Saturday, then this indicates the first Saturday on or before the 20th day in the RunMonth. If RunDay is -1 and RunDayOfWeek is -Sunday, then this indicates the last Sunday in the RunMonth.
132A positive or negative integer used in conjunction with RunDay to indicate the day of the week on which the Job is processed. RunDayOfWeek is set to 0 to indicate an exact day of the month, such as March 1. A positive integer (representing Sunday, Monday, ..., Saturday) means that the day of week is found on or after the specified RunDay. A negative integer (representing -Sunday, -Monday, ..., -Saturday) means that the day of week is found on or BEFORE the RunDay. A positive or negative integer used in conjunction with RunDay to indicate the day of the week on which the Job is processed. RunDayOfWeek is set to 0 to indicate an exact day of the month, such as March 1. A positive integer (representing Sunday, Monday, ..., Saturday) means that the day of week is found on or after the specified RunDay. A negative integer (representing -Sunday, -Monday, ..., -Saturday) means that the day of week is found on or BEFORE the RunDay.
133-Saturday -Saturday
134-Friday -Friday
135-Thursday -Thursday
136-Wednesday -Wednesday
137-Tuesday -Tuesday
138-Monday -Monday
139-Sunday -Sunday
140ExactDayOfMonth ExactDayOfMonth
141Sunday Sunday
142Monday Monday
143Tuesday Tuesday
144Wednesday Wednesday
145Thursday Thursday
146Friday Friday
147Saturday Saturday
148The time interval after midnight when the Job should be processed. For example,
00000000020000.000000:000
indicates that the Job should be run on or after two o\'clock, local time or UTC time (distinguished using the LocalOrUtcTime property.
The time interval after midnight when the Job should be processed. For example,
00000000020000.000000:000
indicates that the Job should be run on or after two o\'clock, local time or UTC time (distinguished using the LocalOrUtcTime property.
149This property indicates whether the times represented in the RunStartInterval and UntilTime properties represent local times or UTC times. Time values are synchronized worldwide by using the enumeration value 2, "UTC Time". This property indicates whether the times represented in the RunStartInterval and UntilTime properties represent local times or UTC times. Time values are synchronized worldwide by using the enumeration value 2, "UTC Time".
150Local Time Local Time
151UTC Time UTC Time
152The time after which the Job is invalid or should be stopped. This time can be represented by an actual date and time, or by an interval relative to the time that this property is requested. A value of all nines indicates that the Job can run indefinitely. The time after which the Job is invalid or should be stopped. This time can be represented by an actual date and time, or by an interval relative to the time that this property is requested. A value of all nines indicates that the Job can run indefinitely.
153The User who is to be notified upon the Job completion or failure. The User who is to be notified upon the Job completion or failure.
154The User that submitted the Job, or the Service or method name that caused the job to be created. The User that submitted the Job, or the Service or method name that caused the job to be created.
155Indicates the urgency or importance of execution of the Job. The lower the number, the higher the priority. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the setting information that would influence the results of a job. Indicates the urgency or importance of execution of the Job. The lower the number, the higher the priority. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the setting information that would influence the results of a job.
156The percentage of the job that has completed at the time that this value is requested. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run data can be stored in this single-valued property.
Note that the value 101 is undefined and will be not be allowed in the next major revision of the specification.
The percentage of the job that has completed at the time that this value is requested. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run data can be stored in this single-valued property.
Note that the value 101 is undefined and will be not be allowed in the next major revision of the specification.
157Percent Percent
158Indicates whether or not the job should be automatically deleted upon completion. Note that the \'completion\' of a recurring job is defined by its JobRunTimes or UntilTime properties, or when the Job is terminated by manual intervention. If this property is set to false and the job completes, then the extrinsic method DeleteInstance must be used to delete the job instead of updating this property. Indicates whether or not the job should be automatically deleted upon completion. Note that the \'completion\' of a recurring job is defined by its JobRunTimes or UntilTime properties, or when the Job is terminated by manual intervention. If this property is set to false and the job completes, then the extrinsic method DeleteInstance must be used to delete the job instead of updating this property.
159A vendor-specific error code. The value must be set to zero if the Job completed without error. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run error can be stored in this single-valued property. A vendor-specific error code. The value must be set to zero if the Job completed without error. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run error can be stored in this single-valued property.
160A free-form string that contains the vendor error description. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run error can be stored in this single-valued property. A free-form string that contains the vendor error description. Note that this property is also present in the JobProcessingStatistics class. This class is necessary to capture the processing information for recurring Jobs, because only the \'last\' run error can be stored in this single-valued property.
161Describes the recovery action to be taken for an unsuccessfully run Job. The possible values are:
0 = "Unknown", meaning it is unknown as to what recovery action to take
1 = "Other", indicating that the recovery action will be specified in the OtherRecoveryAction property
2 = "Do Not Continue", meaning stop the execution of the job and appropriately update its status
3 = "Continue With Next Job", meaning continue with the next job in the queue
4 = "Re-run Job", indicating that the job should be re-run
5 = "Run Recovery Job", meaning run the Job associated using the RecoveryJob relationship. Note that the recovery Job must already be in the queue from which it will run.
Describes the recovery action to be taken for an unsuccessfully run Job. The possible values are:
0 = "Unknown", meaning it is unknown as to what recovery action to take
1 = "Other", indicating that the recovery action will be specified in the OtherRecoveryAction property
2 = "Do Not Continue", meaning stop the execution of the job and appropriately update its status
3 = "Continue With Next Job", meaning continue with the next job in the queue
4 = "Re-run Job", indicating that the job should be re-run
5 = "Run Recovery Job", meaning run the Job associated using the RecoveryJob relationship. Note that the recovery Job must already be in the queue from which it will run.
162Do Not Continue Do Not Continue
163Continue With Next Job Continue With Next Job
164Re-run Job Re-run Job
165Run Recovery Job Run Recovery Job
166A string describing the recovery action when the RecoveryAction property of the instance is 1 ("Other"). A string describing the recovery action when the RecoveryAction property of the instance is 1 ("Other").
167KillJob is being deprecated because there is no distinction made between an orderly shutdown and an immediate kill. CIM_ConcreteJob.RequestStateChange() provides \'Terminate\' and \'Kill\' options to allow this distinction.
A method to kill this job and any underlying processes, and to remove any \'dangling\' associations.
KillJob is being deprecated because there is no distinction made between an orderly shutdown and an immediate kill. CIM_ConcreteJob.RequestStateChange() provides \'Terminate\' and \'Kill\' options to allow this distinction.
A method to kill this job and any underlying processes, and to remove any \'dangling\' associations.
168Success Success
169Not Supported Not Supported
170Timeout Timeout
171Failed Failed
172Access Denied Access Denied
173Not Found Not Found
174Vendor Specific Vendor Specific
175Indicates whether or not the Job should be automatically deleted upon termination. This parameter takes precedence over the property, DeleteOnCompletion. Indicates whether or not the Job should be automatically deleted upon termination. This parameter takes precedence over the property, DeleteOnCompletion.
176A Job is a LogicalElement that represents an executing unit of work, such as a script or a print job. A Job is distinct from a Process in that a Job can be scheduled or queued, and its execution is not limited to a single system. A Job is a LogicalElement that represents an executing unit of work, such as a script or a print job. A Job is distinct from a Process in that a Job can be scheduled or queued, and its execution is not limited to a single system.
1772.10.0 2.10.0
178Primary classification of the error. The following values are defined:
2 - Communications Error. Errors of this type are principally associated with the procedures and/or processes required to convey information from one point to another.
3 - Quality of Service Error. Errors of this type are principally associated with failures that result in reduced functionality or performance.
4 - Software Error. Error of this type are principally associated with a software or processing fault.
5 - Hardware Error. Errors of this type are principally associated with an equipment or hardware failure.
6 - Environmental Error. Errors of this type are principally associated with a failure condition relating the to facility, or other environmental considerations.
7 - Security Error. Errors of this type are associated with security violations, detection of viruses, and similar issues.
8 - Oversubscription Error. Errors of this type are principally associated with the failure to allocate sufficient resources to complete the operation.
9 - Unavailable Resource Error. Errors of this type are principally associated with the failure to access a required resource.
10 -Unsupported Operation Error. Errors of this type are principally associated with requests that are not supported.
Primary classification of the error. The following values are defined:
2 - Communications Error. Errors of this type are principally associated with the procedures and/or processes required to convey information from one point to another.
3 - Quality of Service Error. Errors of this type are principally associated with failures that result in reduced functionality or performance.
4 - Software Error. Error of this type are principally associated with a software or processing fault.
5 - Hardware Error. Errors of this type are principally associated with an equipment or hardware failure.
6 - Environmental Error. Errors of this type are principally associated with a failure condition relating the to facility, or other environmental considerations.
7 - Security Error. Errors of this type are associated with security violations, detection of viruses, and similar issues.
8 - Oversubscription Error. Errors of this type are principally associated with the failure to allocate sufficient resources to complete the operation.
9 - Unavailable Resource Error. Errors of this type are principally associated with the failure to access a required resource.
10 -Unsupported Operation Error. Errors of this type are principally associated with requests that are not supported.
179Communications Error Communications Error
180Quality of Service Error Quality of Service Error
181Software Error Software Error
182Hardware Error Hardware Error
183Environmental Error Environmental Error
184Security Error Security Error
185Oversubscription Error Oversubscription Error
186Unavailable Resource Error Unavailable Resource Error
187Unsupported Operation Error Unsupported Operation Error
188A free-form string describing the ErrorType when 1, "Other", is specified as the ErrorType. A free-form string describing the ErrorType when 1, "Other", is specified as the ErrorType.
189A string that uniquely identifies the entity that owns the definition of the format of the Message described in this instance. OwningEntity MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity or standards body defining the format. A string that uniquely identifies the entity that owns the definition of the format of the Message described in this instance. OwningEntity MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity or standards body defining the format.
190An opaque string that uniquely identifies, within the scope of the OwningEntity, the format of the Message. An opaque string that uniquely identifies, within the scope of the OwningEntity, the format of the Message.
191The formatted message. This message is constructed by combining some or all of the dynamic elements specified in the MessageArguments property with the static elements uniquely identified by the MessageID in a message registry or other catalog associated with the OwningEntity. The formatted message. This message is constructed by combining some or all of the dynamic elements specified in the MessageArguments property with the static elements uniquely identified by the MessageID in a message registry or other catalog associated with the OwningEntity.
192An array containing the dynamic content of the message. An array containing the dynamic content of the message.
193An enumerated value that describes the severity of the Indication from the notifier\'s point of view:
0 - the Perceived Severity of the indication is unknown or indeterminate.
1 - Other, by CIM convention, is used to indicate that the Severity\'s value can be found in the OtherSeverity property.
2 - Information should be used when providing an informative response.
3 - Degraded/Warning should be used when its appropriate to let the user decide if action is needed.
4 - Minor should be used to indicate action is needed, but the situation is not serious at this time.
5 - Major should be used to indicate action is needed NOW.
6 - Critical should be used to indicate action is needed NOW and the scope is broad (perhaps an imminent outage to a critical resource will result).
7 - Fatal/NonRecoverable should be used to indicate an error occurred, but it\'s too late to take remedial action.
2 and 0 - Information and Unknown (respectively) follow common usage. Literally, the Error is purely informational or its severity is simply unknown.
An enumerated value that describes the severity of the Indication from the notifier\'s point of view:
0 - the Perceived Severity of the indication is unknown or indeterminate.
1 - Other, by CIM convention, is used to indicate that the Severity\'s value can be found in the OtherSeverity property.
2 - Information should be used when providing an informative response.
3 - Degraded/Warning should be used when its appropriate to let the user decide if action is needed.
4 - Minor should be used to indicate action is needed, but the situation is not serious at this time.
5 - Major should be used to indicate action is needed NOW.
6 - Critical should be used to indicate action is needed NOW and the scope is broad (perhaps an imminent outage to a critical resource will result).
7 - Fatal/NonRecoverable should be used to indicate an error occurred, but it\'s too late to take remedial action.
2 and 0 - Information and Unknown (respectively) follow common usage. Literally, the Error is purely informational or its severity is simply unknown.
194Information Information
195Minor Minor
196Major Major
197Critical Critical
198Fatal/NonRecoverable Fatal/NonRecoverable
199An enumerated value that describes the probable cause of the error. An enumerated value that describes the probable cause of the error.
200Adapter/Card Error Adapter/Card Error
201Application Subsystem Failure Application Subsystem Failure
202Bandwidth Reduced Bandwidth Reduced
203Connection Establishment Error Connection Establishment Error
204Communications Protocol Error Communications Protocol Error
205Communications Subsystem Failure Communications Subsystem Failure
206Configuration/Customization Error Configuration/Customization Error
207Congestion Congestion
208Corrupt Data Corrupt Data
209CPU Cycles Limit Exceeded CPU Cycles Limit Exceeded
210Dataset/Modem Error Dataset/Modem Error
211Degraded Signal Degraded Signal
212DTE-DCE Interface Error DTE-DCE Interface Error
213Enclosure Door Open Enclosure Door Open
214Equipment Malfunction Equipment Malfunction
215Excessive Vibration Excessive Vibration
216File Format Error File Format Error
217Fire Detected Fire Detected
218Flood Detected Flood Detected
219Framing Error Framing Error
220HVAC Problem HVAC Problem
221Humidity Unacceptable Humidity Unacceptable
222I/O Device Error I/O Device Error
223Input Device Error Input Device Error
224LAN Error LAN Error
225Non-Toxic Leak Detected Non-Toxic Leak Detected
226Local Node Transmission Error Local Node Transmission Error
227Loss of Frame Loss of Frame
228Loss of Signal Loss of Signal
229Material Supply Exhausted Material Supply Exhausted
230Multiplexer Problem Multiplexer Problem
231Out of Memory Out of Memory
232Output Device Error Output Device Error
233Performance Degraded Performance Degraded
234Power Problem Power Problem
235Pressure Unacceptable Pressure Unacceptable
236Processor Problem (Internal Machine Error) Processor Problem (Internal Machine Error)
237Pump Failure Pump Failure
238Queue Size Exceeded Queue Size Exceeded
239Receive Failure Receive Failure
240Receiver Failure Receiver Failure
241Remote Node Transmission Error Remote Node Transmission Error
242Resource at or Nearing Capacity Resource at or Nearing Capacity
243Response Time Excessive Response Time Excessive
244Retransmission Rate Excessive Retransmission Rate Excessive
245Software Program Abnormally Terminated Software Program Abnormally Terminated
246Software Program Error (Incorrect Results) Software Program Error (Incorrect Results)
247Storage Capacity Problem Storage Capacity Problem
248Temperature Unacceptable Temperature Unacceptable
249Threshold Crossed Threshold Crossed
250Timing Problem Timing Problem
251Toxic Leak Detected Toxic Leak Detected
252Transmit Failure Transmit Failure
253Transmitter Failure Transmitter Failure
254Underlying Resource Unavailable Underlying Resource Unavailable
255Version Mismatch Version Mismatch
256Previous Alert Cleared Previous Alert Cleared
257Login Attempts Failed Login Attempts Failed
258Software Virus Detected Software Virus Detected
259Hardware Security Breached Hardware Security Breached
260Denial of Service Detected Denial of Service Detected
261Security Credential Mismatch Security Credential Mismatch
262Unauthorized Access Unauthorized Access
263Alarm Received Alarm Received
264Loss of Pointer Loss of Pointer
265Payload Mismatch Payload Mismatch
266Transmission Error Transmission Error
267Excessive Error Rate Excessive Error Rate
268Trace Problem Trace Problem
269Element Unavailable Element Unavailable
270Element Missing Element Missing
271Loss of Multi Frame Loss of Multi Frame
272Broadcast Channel Failure Broadcast Channel Failure
273Invalid Message Received Invalid Message Received
274Routing Failure Routing Failure
275Backplane Failure Backplane Failure
276Identifier Duplication Identifier Duplication
277Protection Path Failure Protection Path Failure
278Sync Loss or Mismatch Sync Loss or Mismatch
279Terminal Problem Terminal Problem
280Real Time Clock Failure Real Time Clock Failure
281Antenna Failure Antenna Failure
282Battery Charging Failure Battery Charging Failure
283Disk Failure Disk Failure
284Frequency Hopping Failure Frequency Hopping Failure
285Loss of Redundancy Loss of Redundancy
286Power Supply Failure Power Supply Failure
287Signal Quality Problem Signal Quality Problem
288Battery Discharging Battery Discharging
289Battery Failure Battery Failure
290Commercial Power Problem Commercial Power Problem
291Fan Failure Fan Failure
292Engine Failure Engine Failure
293Sensor Failure Sensor Failure
294Fuse Failure Fuse Failure
295Generator Failure Generator Failure
296Low Battery Low Battery
297Low Fuel Low Fuel
298Low Water Low Water
299Explosive Gas Explosive Gas
300High Winds High Winds
301Ice Buildup Ice Buildup
302Smoke Smoke
303Memory Mismatch Memory Mismatch
304Out of CPU Cycles Out of CPU Cycles
305Software Environment Problem Software Environment Problem
306Software Download Failure Software Download Failure
307Element Reinitialized Element Reinitialized
308Logging Problems Logging Problems
309Leak Detected Leak Detected
310Protection Mechanism Failure Protection Mechanism Failure
311Protecting Resource Failure Protecting Resource Failure
312Database Inconsistency Database Inconsistency
313Authentication Failure Authentication Failure
314Breach of Confidentiality Breach of Confidentiality
315Cable Tamper Cable Tamper
316Delayed Information Delayed Information
317Duplicate Information Duplicate Information
318Information Missing Information Missing
319Information Modification Information Modification
320Information Out of Sequence Information Out of Sequence
321Key Expired Key Expired
322Non-Repudiation Failure Non-Repudiation Failure
323Out of Hours Activity Out of Hours Activity
324Out of Service Out of Service
325Procedural Error Procedural Error
326Unexpected Information Unexpected Information
327A free-form string describing the probable cause of the error. A free-form string describing the probable cause of the error.
328A free-form string describing recommended actions to take to resolve the error. A free-form string describing recommended actions to take to resolve the error.
329The identifying information of the entity (i.e., the instance) generating the error. If this entity is modeled in the CIM Schema, this property contains the path of the instance encoded as a string parameter. If not modeled, the property contains some identifying string that names the entity that generated the error. The path or identifying string is formatted per the ErrorSourceFormat property. The identifying information of the entity (i.e., the instance) generating the error. If this entity is modeled in the CIM Schema, this property contains the path of the instance encoded as a string parameter. If not modeled, the property contains some identifying string that names the entity that generated the error. The path or identifying string is formatted per the ErrorSourceFormat property.
330The format of the ErrorSource property is interpretable based on the value of this property. Values are defined as:
0 - Unknown. The format is unknown or not meaningfully interpretable by a CIM client application.
1 - Other. The format is defined by the value of the OtherErrorSourceFormat property.2 - CIMObjectPath. A CIM Object Path as defined in the CIM Infrastructure specification. Note: CIM 2.5 and earlier used the term object names.
The format of the ErrorSource property is interpretable based on the value of this property. Values are defined as:
0 - Unknown. The format is unknown or not meaningfully interpretable by a CIM client application.
1 - Other. The format is defined by the value of the OtherErrorSourceFormat property.2 - CIMObjectPath. A CIM Object Path as defined in the CIM Infrastructure specification. Note: CIM 2.5 and earlier used the term object names.
331CIMObjectPath CIMObjectPath
332A string defining "Other" values for ErrorSourceFormat. This value MUST be set to a non NULL value when ErrorSourceFormat is set to a value of 1 ("Other"). For all other values of ErrorSourceFormat, the value of this string must be set to NULL. A string defining "Other" values for ErrorSourceFormat. This value MUST be set to a non NULL value when ErrorSourceFormat is set to a value of 1 ("Other"). For all other values of ErrorSourceFormat, the value of this string must be set to NULL.
333The CIM status code that characterizes this instance.
This property defines the status codes that MAY be return by a conforming CIM Server or Listener. Note that not all status codes are valid for each operation. The specification for each operation SHOULD define the status codes that may be returned by that operation.
The following values for CIM status code are defined:
1 - CIM_ERR_FAILED. A general error occurred that is not covered by a more specific error code.
2 - CIM_ERR_ACCESS_DENIED. Access to a CIM resource was not available to the client.
3 - CIM_ERR_INVALID_NAMESPACE. The target namespace does not exist.
4 - CIM_ERR_INVALID_PARAMETER. One or more parameter values passed to the method were invalid.
5 - CIM_ERR_INVALID_CLASS. The specified Class does not exist.
6 - CIM_ERR_NOT_FOUND. The requested object could not be found.
7 - CIM_ERR_NOT_SUPPORTED. The requested operation is not supported.
8 - CIM_ERR_CLASS_HAS_CHILDREN. Operation cannot be carried out on this class since it has instances.
9 - CIM_ERR_CLASS_HAS_INSTANCES. Operation cannot be carried out on this class since it has instances.
10 - CIM_ERR_INVALID_SUPERCLASS. Operation cannot be carried out since the specified superclass does not exist.
11 - CIM_ERR_ALREADY_EXISTS. Operation cannot be carried out because an object already exists.
12 - CIM_ERR_NO_SUCH_PROPERTY. The specified Property does not exist.
13 - CIM_ERR_TYPE_MISMATCH. The value supplied is incompatible with the type.
14 - CIM_ERR_QUERY_LANGUAGE_NOT_SUPPORTED. The query language is not recognized or supported.
15 - CIM_ERR_INVALID_QUERY. The query is not valid for the specified query language.
16 - CIM_ERR_METHOD_NOT_AVAILABLE. The extrinsic Method could not be executed.
17 - CIM_ERR_METHOD_NOT_FOUND. The specified extrinsic Method does not exist.
18 - CIM_ERR_UNEXPECTED_RESPONSE. The returned response to the asynchronous operation was not expected.
19 - CIM_ERR_INVALID_RESPONSE_DESTINATION. The specified destination for the asynchronous response is not valid.
20 - CIM_ERR_NAMESPACE_NOT_EMPTY. The specified Namespace is not empty.
21 - CIM_ERR_INVALID_ENUMERATION_CONTEXT. The enumeration context supplied is not valid.
22 - CIM_ERR_INVALID_OPERATION_TIMEOUT. The specified Namespace is not empty.
23 - CIM_ERR_PULL_HAS_BEEN_ABANDONED. The specified Namespace is not empty.
24 - CIM_ERR_PULL_CANNOT_BE_ABANDONED. The attempt to abandon a pull operation has failed.
25 - CIM_ERR_FILTERED_ENUMERATION_NOT_SUPPORTED. Filtered Enumeratrions are not supported.
26 - CIM_ERR_CONTINUATION_ON_ERROR_NOT_SUPPORTED. Continue on error is not supported.
27 - CIM_ERR_SERVER_LIMITS_EXCEEDED. The WBEM Server limits have been exceeded (e.g. memory, connections, ...).
28 - CIM_ERR_SERVER_IS_SHUTTING_DOWN. The WBEM Server is shutting down.
29 - CIM_ERR_QUERY_FEATURE_NOT_SUPPORTED. The specified Query Feature is not supported.
The CIM status code that characterizes this instance.
This property defines the status codes that MAY be return by a conforming CIM Server or Listener. Note that not all status codes are valid for each operation. The specification for each operation SHOULD define the status codes that may be returned by that operation.
The following values for CIM status code are defined:
1 - CIM_ERR_FAILED. A general error occurred that is not covered by a more specific error code.
2 - CIM_ERR_ACCESS_DENIED. Access to a CIM resource was not available to the client.
3 - CIM_ERR_INVALID_NAMESPACE. The target namespace does not exist.
4 - CIM_ERR_INVALID_PARAMETER. One or more parameter values passed to the method were invalid.
5 - CIM_ERR_INVALID_CLASS. The specified Class does not exist.
6 - CIM_ERR_NOT_FOUND. The requested object could not be found.
7 - CIM_ERR_NOT_SUPPORTED. The requested operation is not supported.
8 - CIM_ERR_CLASS_HAS_CHILDREN. Operation cannot be carried out on this class since it has instances.
9 - CIM_ERR_CLASS_HAS_INSTANCES. Operation cannot be carried out on this class since it has instances.
10 - CIM_ERR_INVALID_SUPERCLASS. Operation cannot be carried out since the specified superclass does not exist.
11 - CIM_ERR_ALREADY_EXISTS. Operation cannot be carried out because an object already exists.
12 - CIM_ERR_NO_SUCH_PROPERTY. The specified Property does not exist.
13 - CIM_ERR_TYPE_MISMATCH. The value supplied is incompatible with the type.
14 - CIM_ERR_QUERY_LANGUAGE_NOT_SUPPORTED. The query language is not recognized or supported.
15 - CIM_ERR_INVALID_QUERY. The query is not valid for the specified query language.
16 - CIM_ERR_METHOD_NOT_AVAILABLE. The extrinsic Method could not be executed.
17 - CIM_ERR_METHOD_NOT_FOUND. The specified extrinsic Method does not exist.
18 - CIM_ERR_UNEXPECTED_RESPONSE. The returned response to the asynchronous operation was not expected.
19 - CIM_ERR_INVALID_RESPONSE_DESTINATION. The specified destination for the asynchronous response is not valid.
20 - CIM_ERR_NAMESPACE_NOT_EMPTY. The specified Namespace is not empty.
21 - CIM_ERR_INVALID_ENUMERATION_CONTEXT. The enumeration context supplied is not valid.
22 - CIM_ERR_INVALID_OPERATION_TIMEOUT. The specified Namespace is not empty.
23 - CIM_ERR_PULL_HAS_BEEN_ABANDONED. The specified Namespace is not empty.
24 - CIM_ERR_PULL_CANNOT_BE_ABANDONED. The attempt to abandon a pull operation has failed.
25 - CIM_ERR_FILTERED_ENUMERATION_NOT_SUPPORTED. Filtered Enumeratrions are not supported.
26 - CIM_ERR_CONTINUATION_ON_ERROR_NOT_SUPPORTED. Continue on error is not supported.
27 - CIM_ERR_SERVER_LIMITS_EXCEEDED. The WBEM Server limits have been exceeded (e.g. memory, connections, ...).
28 - CIM_ERR_SERVER_IS_SHUTTING_DOWN. The WBEM Server is shutting down.
29 - CIM_ERR_QUERY_FEATURE_NOT_SUPPORTED. The specified Query Feature is not supported.
334CIM_ERR_FAILED CIM_ERR_FAILED
335CIM_ERR_ACCESS_DENIED CIM_ERR_ACCESS_DENIED
336CIM_ERR_INVALID_NAMESPACE CIM_ERR_INVALID_NAMESPACE
337CIM_ERR_INVALID_PARAMETER CIM_ERR_INVALID_PARAMETER
338CIM_ERR_INVALID_CLASS CIM_ERR_INVALID_CLASS
339CIM_ERR_NOT_FOUND CIM_ERR_NOT_FOUND
340CIM_ERR_NOT_SUPPORTED CIM_ERR_NOT_SUPPORTED
341CIM_ERR_CLASS_HAS_CHILDREN CIM_ERR_CLASS_HAS_CHILDREN
342CIM_ERR_CLASS_HAS_INSTANCES CIM_ERR_CLASS_HAS_INSTANCES
343CIM_ERR_INVALID_SUPERCLASS CIM_ERR_INVALID_SUPERCLASS
344CIM_ERR_ALREADY_EXISTS CIM_ERR_ALREADY_EXISTS
345CIM_ERR_NO_SUCH_PROPERTY CIM_ERR_NO_SUCH_PROPERTY
346CIM_ERR_TYPE_MISMATCH CIM_ERR_TYPE_MISMATCH
347CIM_ERR_QUERY_LANGUAGE_NOT_SUPPORTED CIM_ERR_QUERY_LANGUAGE_NOT_SUPPORTED
348CIM_ERR_INVALID_QUERY CIM_ERR_INVALID_QUERY
349CIM_ERR_METHOD_NOT_AVAILABLE CIM_ERR_METHOD_NOT_AVAILABLE
350CIM_ERR_METHOD_NOT_FOUND CIM_ERR_METHOD_NOT_FOUND
351CIM_ERR_UNEXPECTED_RESPONSE CIM_ERR_UNEXPECTED_RESPONSE
352CIM_ERR_INVALID_RESPONSE_DESTINATION CIM_ERR_INVALID_RESPONSE_DESTINATION
353CIM_ERR_NAMESPACE_NOT_EMPTY CIM_ERR_NAMESPACE_NOT_EMPTY
354CIM_ERR_INVALID_ENUMERATION_CONTEXT CIM_ERR_INVALID_ENUMERATION_CONTEXT
355CIM_ERR_INVALID_OPERATION_TIMEOUT CIM_ERR_INVALID_OPERATION_TIMEOUT
356CIM_ERR_PULL_HAS_BEEN_ABANDONED CIM_ERR_PULL_HAS_BEEN_ABANDONED
357CIM_ERR_PULL_CANNOT_BE_ABANDONED CIM_ERR_PULL_CANNOT_BE_ABANDONED
358CIM_ERR_FILTERED_ENUMERATION_NOT_SUPPORTED CIM_ERR_FILTERED_ENUMERATION_NOT_SUPPORTED
359CIM_ERR_CONTINUATION_ON_ERROR_NOT_SUPPORTED CIM_ERR_CONTINUATION_ON_ERROR_NOT_SUPPORTED
360CIM_ERR_SERVER_LIMITS_EXCEEDED CIM_ERR_SERVER_LIMITS_EXCEEDED
361CIM_ERR_SERVER_IS_SHUTTING_DOWN CIM_ERR_SERVER_IS_SHUTTING_DOWN
362CIM_ERR_QUERY_FEATURE_NOT_SUPPORTED CIM_ERR_QUERY_FEATURE_NOT_SUPPORTED
363A free-form string containing a human-readable description of CIMStatusCode. This description MAY extend, but MUST be consistent with, the definition of CIMStatusCode. A free-form string containing a human-readable description of CIMStatusCode. This description MAY extend, but MUST be consistent with, the definition of CIMStatusCode.
3642.22.1 2.22.1
365CIM_Error is a specialized class that contains information about the severity, cause, recommended actions and other data related to the failure of a CIM Operation. Instances of this type MAY be included as part of the response to a CIM Operation. CIM_Error is a specialized class that contains information about the severity, cause, recommended actions and other data related to the failure of a CIM Operation. Instances of this type MAY be included as part of the response to a CIM Operation.
366Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following \'preferred\' algorithm:
:
Where and are separated by a colon \':\', and where must include a copyrighted, trademarked or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID, or that is a registered ID that is assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness must not contain a colon (\':\'). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be re-used to identify different underlying (real-world) elements. If the above \'preferred\' algorithm is not used, the defining entity must assure that the resulting InstanceID is not re-used across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
For DMTF defined instances, the \'preferred\' algorithm must be used with the set to \'CIM\'.
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following \'preferred\' algorithm:
:
Where and are separated by a colon \':\', and where must include a copyrighted, trademarked or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID, or that is a registered ID that is assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness must not contain a colon (\':\'). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be re-used to identify different underlying (real-world) elements. If the above \'preferred\' algorithm is not used, the defining entity must assure that the resulting InstanceID is not re-used across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
For DMTF defined instances, the \'preferred\' algorithm must be used with the set to \'CIM\'.
367The user-friendly name for this instance of a Job. In addition, the user-friendly name can be used as a property for a search or query. (Note: Name does not have to be unique within a namespace.) The user-friendly name for this instance of a Job. In addition, the user-friendly name can be used as a property for a search or query. (Note: Name does not have to be unique within a namespace.)
368JobState is an integer enumeration that indicates the operational state of a Job. It can also indicate transitions between these states, for example, \'Shutting Down\' and \'Starting\'. Following is a brief description of the states:
New (2) indicates that the job has never been started.
Starting (3) indicates that the job is moving from the \'New\', \'Suspended\', or \'Service\' states into the \'Running\' state.
Running (4) indicates that the Job is running.
Suspended (5) indicates that the Job is stopped, but can be restarted in a seamless manner.
Shutting Down (6) indicates that the job is moving to a \'Completed\', \'Terminated\', or \'Killed\' state.
Completed (7) indicates that the job has completed normally.
Terminated (8) indicates that the job has been stopped by a \'Terminate\' state change request. The job and all its underlying processes are ended and can be restarted (this is job-specific) only as a new job.
Killed (9) indicates that the job has been stopped by a \'Kill\' state change request. Underlying processes might have been left running, and cleanup might be required to free up resources.
Exception (10) indicates that the Job is in an abnormal state that might be indicative of an error condition. Actual status might be displayed though job-specific objects.
Service (11) indicates that the Job is in a vendor-specific state that supports problem discovery, or resolution, or both.
Query pending (12) waiting for a client to resolve a query
JobState is an integer enumeration that indicates the operational state of a Job. It can also indicate transitions between these states, for example, \'Shutting Down\' and \'Starting\'. Following is a brief description of the states:
New (2) indicates that the job has never been started.
Starting (3) indicates that the job is moving from the \'New\', \'Suspended\', or \'Service\' states into the \'Running\' state.
Running (4) indicates that the Job is running.
Suspended (5) indicates that the Job is stopped, but can be restarted in a seamless manner.
Shutting Down (6) indicates that the job is moving to a \'Completed\', \'Terminated\', or \'Killed\' state.
Completed (7) indicates that the job has completed normally.
Terminated (8) indicates that the job has been stopped by a \'Terminate\' state change request. The job and all its underlying processes are ended and can be restarted (this is job-specific) only as a new job.
Killed (9) indicates that the job has been stopped by a \'Kill\' state change request. Underlying processes might have been left running, and cleanup might be required to free up resources.
Exception (10) indicates that the Job is in an abnormal state that might be indicative of an error condition. Actual status might be displayed though job-specific objects.
Service (11) indicates that the Job is in a vendor-specific state that supports problem discovery, or resolution, or both.
Query pending (12) waiting for a client to resolve a query
369New New
370Running Running
371Suspended Suspended
372Terminated Terminated
373Killed Killed
374Exception Exception
375Service Service
376Query Pending Query Pending
377The date or time when the state of the Job last changed. If the state of the Job has not changed and this property is populated, then it must be set to a 0 interval value. If a state change was requested, but rejected or not yet processed, the property must not be updated. The date or time when the state of the Job last changed. If the state of the Job has not changed and this property is populated, then it must be set to a 0 interval value. If a state change was requested, but rejected or not yet processed, the property must not be updated.
378The amount of time that the Job is retained after it has finished executing, either succeeding or failing in that execution. The job must remain in existence for some period of time regardless of the value of the DeleteOnCompletion property.
The default is five minutes.
The amount of time that the Job is retained after it has finished executing, either succeeding or failing in that execution. The job must remain in existence for some period of time regardless of the value of the DeleteOnCompletion property.
The default is five minutes.
379Requests that the state of the job be changed to the value specified in the RequestedState parameter. Invoking the RequestStateChange method multiple times could result in earlier requests being overwritten or lost.
If 0 is returned, then the task completed successfully. Any other return code indicates an error condition.
Requests that the state of the job be changed to the value specified in the RequestedState parameter. Invoking the RequestStateChange method multiple times could result in earlier requests being overwritten or lost.
If 0 is returned, then the task completed successfully. Any other return code indicates an error condition.
380Completed with No Error Completed with No Error
381Unknown/Unspecified Error Unknown/Unspecified Error
382Can NOT complete within Timeout Period Can NOT complete within Timeout Period
383Invalid Parameter Invalid Parameter
384In Use In Use
385Method Parameters Checked - Transition Started Method Parameters Checked - Transition Started
386Invalid State Transition Invalid State Transition
387Use of Timeout Parameter Not Supported Use of Timeout Parameter Not Supported
388Busy Busy
389Method Reserved Method Reserved
390RequestStateChange changes the state of a job. The possible values are as follows:
Start (2) changes the state to \'Running\'.
Suspend (3) stops the job temporarily. The intention is to subsequently restart the job with \'Start\'. It might be possible to enter the \'Service\' state while suspended. (This is job-specific.)
Terminate (4) stops the job cleanly, saving data, preserving the state, and shutting down all underlying processes in an orderly manner.
Kill (5) terminates the job immediately with no requirement to save data or preserve the state.
Service (6) puts the job into a vendor-specific service state. It might be possible to restart the job.
RequestStateChange changes the state of a job. The possible values are as follows:
Start (2) changes the state to \'Running\'.
Suspend (3) stops the job temporarily. The intention is to subsequently restart the job with \'Start\'. It might be possible to enter the \'Service\' state while suspended. (This is job-specific.)
Terminate (4) stops the job cleanly, saving data, preserving the state, and shutting down all underlying processes in an orderly manner.
Kill (5) terminates the job immediately with no requirement to save data or preserve the state.
Service (6) puts the job into a vendor-specific service state. It might be possible to restart the job.
391Start Start
392Suspend Suspend
393Terminate Terminate
394Kill Kill
395A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indicates that the client has no time requirements for the transition.
If this property does not contain 0 or null and the implementation does not support this parameter, a return code of \'Use Of Timeout Parameter Not Supported\' must be returned.
A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indicates that the client has no time requirements for the transition.
If this property does not contain 0 or null and the implementation does not support this parameter, a return code of \'Use Of Timeout Parameter Not Supported\' must be returned.
396When the job is executing or has terminated without error, then this method returns no CIM_Error instance. However, if the job has failed because of some internal problem or because the job has been terminated by a client, then a CIM_Error instance is returned. When the job is executing or has terminated without error, then this method returns no CIM_Error instance. However, if the job has failed because of some internal problem or because the job has been terminated by a client, then a CIM_Error instance is returned.
397Unspecified Error Unspecified Error
398If the OperationalStatus on the Job is not "OK", then this method will return a CIM Error instance. Otherwise, when the Job is "OK", null is returned. If the OperationalStatus on the Job is not "OK", then this method will return a CIM Error instance. Otherwise, when the Job is "OK", null is returned.
399A concrete version of Job. This class represents a generic and instantiable unit of work, such as a batch or a print job. A concrete version of Job. This class represents a generic and instantiable unit of work, such as a batch or a print job.
400EnabledState is an integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these requested states. For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled. The following text briefly summarizes the various enabled and disabled states:
Enabled (2) indicates that the element is or could be executing commands, will process any queued commands, and queues new requests.
Disabled (3) indicates that the element will not execute commands and will drop any new requests.
Shutting Down (4) indicates that the element is in the process of going to a Disabled state.
Not Applicable (5) indicates the element does not support being enabled or disabled.
Enabled but Offline (6) indicates that the element might be completing commands, and will drop any new requests.
Test (7) indicates that the element is in a test state.
Deferred (8) indicates that the element might be completing commands, but will queue any new requests.
Quiesce (9) indicates that the element is enabled but in a restricted mode.
Starting (10) indicates that the element is in the process of going to an Enabled state. New requests are queued.
EnabledState is an integer enumeration that indicates the enabled and disabled states of an element. It can also indicate the transitions between these requested states. For example, shutting down (value=4) and starting (value=10) are transient states between enabled and disabled. The following text briefly summarizes the various enabled and disabled states:
Enabled (2) indicates that the element is or could be executing commands, will process any queued commands, and queues new requests.
Disabled (3) indicates that the element will not execute commands and will drop any new requests.
Shutting Down (4) indicates that the element is in the process of going to a Disabled state.
Not Applicable (5) indicates the element does not support being enabled or disabled.
Enabled but Offline (6) indicates that the element might be completing commands, and will drop any new requests.
Test (7) indicates that the element is in a test state.
Deferred (8) indicates that the element might be completing commands, but will queue any new requests.
Quiesce (9) indicates that the element is enabled but in a restricted mode.
Starting (10) indicates that the element is in the process of going to an Enabled state. New requests are queued.
401Enabled Enabled
402Disabled Disabled
403Not Applicable Not Applicable
404Enabled but Offline Enabled but Offline
405Deferred Deferred
406Quiesce Quiesce
407A string that describes the enabled or disabled state of the element when the EnabledState property is set to 1 ("Other"). This property must be set to null when EnabledState is any value other than 1. A string that describes the enabled or disabled state of the element when the EnabledState property is set to 1 ("Other"). This property must be set to null when EnabledState is any value other than 1.
408RequestedState is an integer enumeration that indicates the last requested or desired state for the element, irrespective of the mechanism through which it was requested. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. Note that when EnabledState is set to 5 ("Not Applicable"), then this property has no meaning. Refer to the EnabledState property description for explanations of the values in the RequestedState enumeration.
"Unknown" (0) indicates the last requested state for the element is unknown.
Note that the value "No Change" (5) has been deprecated in lieu of indicating the last requested state is "Unknown" (0). If the last requested or desired state is unknown, RequestedState should have the value "Unknown" (0), but may have the value "No Change" (5).Offline (6) indicates that the element has been requested to transition to the Enabled but Offline EnabledState.
It should be noted that there are two new values in RequestedState that build on the statuses of EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the element is first "Disabled" and then "Enabled". The distinction between requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests an orderly transition to the Disabled state, and might involve removing power, to completely erase any existing state. The Disabled state requests an immediate disabling of the element, such that it will not execute or accept any commands or processing requests.

This property is set as the result of a method invocation (such as Start or StopService on CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the operation and the return of a result code.

If knowledge of the last RequestedState is not supported for the EnabledLogicalElement, the property shall be NULL or have the value 12 "Not Applicable".
RequestedState is an integer enumeration that indicates the last requested or desired state for the element, irrespective of the mechanism through which it was requested. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. Note that when EnabledState is set to 5 ("Not Applicable"), then this property has no meaning. Refer to the EnabledState property description for explanations of the values in the RequestedState enumeration.
"Unknown" (0) indicates the last requested state for the element is unknown.
Note that the value "No Change" (5) has been deprecated in lieu of indicating the last requested state is "Unknown" (0). If the last requested or desired state is unknown, RequestedState should have the value "Unknown" (0), but may have the value "No Change" (5).Offline (6) indicates that the element has been requested to transition to the Enabled but Offline EnabledState.
It should be noted that there are two new values in RequestedState that build on the statuses of EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the element is first "Disabled" and then "Enabled". The distinction between requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests an orderly transition to the Disabled state, and might involve removing power, to completely erase any existing state. The Disabled state requests an immediate disabling of the element, such that it will not execute or accept any commands or processing requests.

This property is set as the result of a method invocation (such as Start or StopService on CIM_Service), or can be overridden and defined as WRITEable in a subclass. The method approach is considered superior to a WRITEable property, because it allows an explicit invocation of the operation and the return of a result code.

If knowledge of the last RequestedState is not supported for the EnabledLogicalElement, the property shall be NULL or have the value 12 "Not Applicable".
409Shut Down Shut Down
410No Change No Change
411Offline Offline
412Test Test
413Reboot Reboot
414Reset Reset
415An enumerated value indicating an administrator\'s default or startup configuration for the Enabled State of an element. By default, the element is "Enabled" (value=2). An enumerated value indicating an administrator\'s default or startup configuration for the Enabled State of an element. By default, the element is "Enabled" (value=2).
416No Default No Default
417The date or time when the EnabledState of the element last changed. If the state of the element has not changed and this property is populated, then it must be set to a 0 interval value. If a state change was requested, but rejected or not yet processed, the property must not be updated. The date or time when the EnabledState of the element last changed. If the state of the element has not changed and this property is populated, then it must be set to a 0 interval value. If a state change was requested, but rejected or not yet processed, the property must not be updated.
418AvailableRequestedStates indicates the possible values for the RequestedState parameter of the method RequestStateChange, used to initiate a state change. The values listed shall be a subset of the values contained in the RequestedStatesSupported property of the associated instance of CIM_EnabledLogicalElementCapabilities where the values selected are a function of the current state of the CIM_EnabledLogicalElement. This property may be non-null if an implementation is able to advertise the set of possible values as a function of the current state. This property shall be null if an implementation is unable to determine the set of possible values as a function of the current state. AvailableRequestedStates indicates the possible values for the RequestedState parameter of the method RequestStateChange, used to initiate a state change. The values listed shall be a subset of the values contained in the RequestedStatesSupported property of the associated instance of CIM_EnabledLogicalElementCapabilities where the values selected are a function of the current state of the CIM_EnabledLogicalElement. This property may be non-null if an implementation is able to advertise the set of possible values as a function of the current state. This property shall be null if an implementation is unable to determine the set of possible values as a function of the current state.
419Defer Defer
420TransitioningToState indicates the target state to which the instance is transitioning.
A value of 5 "No Change" shall indicate that no transition is in progress.A value of 12 "Not Applicable" shall indicate the implementation does not support representing ongoing transitions.
A value other than 5 or 12 shall identify the state to which the element is in the process of transitioning.
TransitioningToState indicates the target state to which the instance is transitioning.
A value of 5 "No Change" shall indicate that no transition is in progress.A value of 12 "Not Applicable" shall indicate the implementation does not support representing ongoing transitions.
A value other than 5 or 12 shall identify the state to which the element is in the process of transitioning.
421Requests that the state of the element be changed to the value specified in the RequestedState parameter. When the requested state change takes place, the EnabledState and RequestedState of the element will be the same. Invoking the RequestStateChange method multiple times could result in earlier requests being overwritten or lost.
A return code of 0 shall indicate the state change was successfully initiated.
A return code of 3 shall indicate that the state transition cannot complete within the interval specified by the TimeoutPeriod parameter.
A return code of 4096 (0x1000) shall indicate the state change was successfully initiated, a ConcreteJob has been created, and its reference returned in the output parameter Job. Any other return code indicates an error condition.
Requests that the state of the element be changed to the value specified in the RequestedState parameter. When the requested state change takes place, the EnabledState and RequestedState of the element will be the same. Invoking the RequestStateChange method multiple times could result in earlier requests being overwritten or lost.
A return code of 0 shall indicate the state change was successfully initiated.
A return code of 3 shall indicate that the state transition cannot complete within the interval specified by the TimeoutPeriod parameter.
A return code of 4096 (0x1000) shall indicate the state change was successfully initiated, a ConcreteJob has been created, and its reference returned in the output parameter Job. Any other return code indicates an error condition.
422Unknown or Unspecified Error Unknown or Unspecified Error
423Cannot complete within Timeout Period Cannot complete within Timeout Period
424Method Parameters Checked - Job Started Method Parameters Checked - Job Started
425The state requested for the element. This information will be placed into the RequestedState property of the instance if the return code of the RequestStateChange method is 0 (\'Completed with No Error\'), or 4096 (0x1000) (\'Job Started\'). Refer to the description of the EnabledState and RequestedState properties for the detailed explanations of the RequestedState values. The state requested for the element. This information will be placed into the RequestedState property of the instance if the return code of the RequestStateChange method is 0 (\'Completed with No Error\'), or 4096 (0x1000) (\'Job Started\'). Refer to the description of the EnabledState and RequestedState properties for the detailed explanations of the RequestedState values.
426May contain a reference to the ConcreteJob created to track the state transition initiated by the method invocation. May contain a reference to the ConcreteJob created to track the state transition initiated by the method invocation.
427A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indicates that the client has no time requirements for the transition.
If this property does not contain 0 or null and the implementation does not support this parameter, a return code of \'Use Of Timeout Parameter Not Supported\' shall be returned.
A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indicates that the client has no time requirements for the transition.
If this property does not contain 0 or null and the implementation does not support this parameter, a return code of \'Use Of Timeout Parameter Not Supported\' shall be returned.
428This class extends LogicalElement to abstract the concept of an element that is enabled and disabled, such as a LogicalDevice or a ServiceAccessPoint. This class extends LogicalElement to abstract the concept of an element that is enabled and disabled, such as a LogicalDevice or a ServiceAccessPoint.
429The Name property uniquely identifies the ServiceAccessPoint and provides an indication of the functionality that is managed. This functionality is described in more detail in the Description property of the object. The Name property uniquely identifies the ServiceAccessPoint and provides an indication of the functionality that is managed. This functionality is described in more detail in the Description property of the object.
430The CreationClassName of the scoping System. The CreationClassName of the scoping System.
431The Name of the scoping System. The Name of the scoping System.
432CreationClassName indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely identified. CreationClassName indicates the name of the class or the subclass used in the creation of an instance. When used with the other key properties of this class, this property allows all instances of this class and its subclasses to be uniquely identified.
433CIM_ServiceAccessPoint represents the ability to utilize or invoke a Service. Access points represent that a Service is made available for other entities to use. CIM_ServiceAccessPoint represents the ability to utilize or invoke a Service. Access points represent that a Service is made available for other entities to use.
434A string that identifies this ProtocolEndpoint with either a port or an interface on a device. To ensure uniqueness, the Name property should be prepended or appended with information from the Type or OtherTypeDescription properties. The method selected is described in the NameFormat property of this class. A string that identifies this ProtocolEndpoint with either a port or an interface on a device. To ensure uniqueness, the Name property should be prepended or appended with information from the Type or OtherTypeDescription properties. The method selected is described in the NameFormat property of this class.
435NameFormat contains the naming heuristic that is selected to ensure that the value of the Name property is unique. For example, you might choose to prepend the name of the port or interface with the Type of ProtocolEndpoint (for example, IPv4) of this instance followed by an underscore. NameFormat contains the naming heuristic that is selected to ensure that the value of the Name property is unique. For example, you might choose to prepend the name of the port or interface with the Type of ProtocolEndpoint (for example, IPv4) of this instance followed by an underscore.
436Note: This property is deprecated in lieu of the ProtocolIFType enumeration. This deprecation was done to have better alignment between the IF-MIB of the IETF and this CIM class.
Deprecated description: ProtocolType is an enumeration that provides information to categorize and classify different instances of this class. For most instances, information in this enumeration and the definition of the subclass overlap. However, there are several cases where a specific subclass of ProtocolEndpoint is not required (for example, there is no Fibre Channel subclass of ProtocolEndpoint). Therefore, this property is needed to define the type of Endpoint.
Note: This property is deprecated in lieu of the ProtocolIFType enumeration. This deprecation was done to have better alignment between the IF-MIB of the IETF and this CIM class.
Deprecated description: ProtocolType is an enumeration that provides information to categorize and classify different instances of this class. For most instances, information in this enumeration and the definition of the subclass overlap. However, there are several cases where a specific subclass of ProtocolEndpoint is not required (for example, there is no Fibre Channel subclass of ProtocolEndpoint). Therefore, this property is needed to define the type of Endpoint.
437IPX IPX
438AppleTalk AppleTalk
439DECnet DECnet
440SNA SNA
441CONP CONP
442CLNP CLNP
443VINES VINES
444XNS XNS
445ATM ATM
446Frame Relay Frame Relay
447Ethernet Ethernet
448TokenRing TokenRing
449FDDI FDDI
450Infiniband Infiniband
451Fibre Channel Fibre Channel
452ISDN BRI Endpoint ISDN BRI Endpoint
453ISDN B Channel Endpoint ISDN B Channel Endpoint
454ISDN D Channel Endpoint ISDN D Channel Endpoint
455IPv4/v6 IPv4/v6
456BGP BGP
457OSPF OSPF
458MPLS MPLS
459UDP UDP
460TCP TCP
461ProtocolIFType is an enumeration that is synchronized with the IANA ifType MIB. The ifType MIB is maintained at the URL, http://www.iana.org/assignments/ianaiftype-mib. Also, additional values defined by the DMTF are included. The property is used to categorize and classify instances of the ProtocolEndpoint class. Note that if the ProtocolIFType is set to 1 (Other), then the type information should be provided in the OtherTypeDescription string property. ProtocolIFType is an enumeration that is synchronized with the IANA ifType MIB. The ifType MIB is maintained at the URL, http://www.iana.org/assignments/ianaiftype-mib. Also, additional values defined by the DMTF are included. The property is used to categorize and classify instances of the ProtocolEndpoint class. Note that if the ProtocolIFType is set to 1 (Other), then the type information should be provided in the OtherTypeDescription string property.
462Regular 1822 Regular 1822
463HDH 1822 HDH 1822
464DDN X.25 DDN X.25
465RFC877 X.25 RFC877 X.25
466Ethernet CSMA/CD Ethernet CSMA/CD
467ISO 802.3 CSMA/CD ISO 802.3 CSMA/CD
468ISO 802.4 Token Bus ISO 802.4 Token Bus
469ISO 802.5 Token Ring ISO 802.5 Token Ring
470ISO 802.6 MAN ISO 802.6 MAN
471StarLAN StarLAN
472Proteon 10Mbit Proteon 10Mbit
473Proteon 80Mbit Proteon 80Mbit
474HyperChannel HyperChannel
475LAP-B LAP-B
476SDLC SDLC
477DS1 DS1
478E1 E1
479Basic ISDN Basic ISDN
480Primary ISDN Primary ISDN
481Proprietary Point-to-Point Serial Proprietary Point-to-Point Serial
482PPP PPP
483Software Loopback Software Loopback
484EON EON
485Ethernet 3Mbit Ethernet 3Mbit
486NSIP NSIP
487SLIP SLIP
488Ultra Ultra
489DS3 DS3
490SIP SIP
491RS-232 RS-232
492Parallel Parallel
493ARCNet ARCNet
494ARCNet Plus ARCNet Plus
495MIO X.25 MIO X.25
496SONET SONET
497X.25 PLE X.25 PLE
498ISO 802.211c ISO 802.211c
499LocalTalk LocalTalk
500SMDS DXI SMDS DXI
501Frame Relay Service Frame Relay Service
502V.35 V.35
503HSSI HSSI
504HIPPI HIPPI
505Modem Modem
506AAL5 AAL5
507SONET Path SONET Path
508SONET VT SONET VT
509SMDS ICIP SMDS ICIP
510Proprietary Virtual/Internal Proprietary Virtual/Internal
511Proprietary Multiplexor Proprietary Multiplexor
512IEEE 802.12 IEEE 802.12
513HIPPI Interface HIPPI Interface
514Frame Relay Interconnect Frame Relay Interconnect
515ATM Emulated LAN for 802.3 ATM Emulated LAN for 802.3
516ATM Emulated LAN for 802.5 ATM Emulated LAN for 802.5
517ATM Emulated Circuit ATM Emulated Circuit
518Fast Ethernet (100BaseT) Fast Ethernet (100BaseT)
519ISDN ISDN
520V.11 V.11
521V.36 V.36
522G703 at 64K G703 at 64K
523G703 at 2Mb G703 at 2Mb
524QLLC QLLC
525Fast Ethernet 100BaseFX Fast Ethernet 100BaseFX
526Channel Channel
527IEEE 802.11 IEEE 802.11
528IBM 260/370 OEMI Channel IBM 260/370 OEMI Channel
529ESCON ESCON
530Data Link Switching Data Link Switching
531ISDN S/T Interface ISDN S/T Interface
532ISDN U Interface ISDN U Interface
533LAP-D LAP-D
534IP Switch IP Switch
535Remote Source Route Bridging Remote Source Route Bridging
536ATM Logical ATM Logical
537DS0 DS0
538DS0 Bundle DS0 Bundle
539BSC BSC
540Async Async
541Combat Net Radio Combat Net Radio
542ISO 802.5r DTR ISO 802.5r DTR
543Ext Pos Loc Report System Ext Pos Loc Report System
544AppleTalk Remote Access Protocol AppleTalk Remote Access Protocol
545Proprietary Connectionless Proprietary Connectionless
546ITU X.29 Host PAD ITU X.29 Host PAD
547ITU X.3 Terminal PAD ITU X.3 Terminal PAD
548Frame Relay MPI Frame Relay MPI
549ITU X.213 ITU X.213
550ADSL ADSL
551RADSL RADSL
552SDSL SDSL
553VDSL VDSL
554ISO 802.5 CRFP ISO 802.5 CRFP
555Myrinet Myrinet
556Voice Receive and Transmit Voice Receive and Transmit
557Voice Foreign Exchange Office Voice Foreign Exchange Office
558Voice Foreign Exchange Service Voice Foreign Exchange Service
559Voice Encapsulation Voice Encapsulation
560Voice over IP Voice over IP
561ATM DXI ATM DXI
562ATM FUNI ATM FUNI
563ATM IMA ATM IMA
564PPP Multilink Bundle PPP Multilink Bundle
565IP over CDLC IP over CDLC
566IP over CLAW IP over CLAW
567Stack to Stack Stack to Stack
568Virtual IP Address Virtual IP Address
569MPC MPC
570IP over ATM IP over ATM
571ISO 802.5j Fibre Token Ring ISO 802.5j Fibre Token Ring
572TDLC TDLC
573Gigabit Ethernet Gigabit Ethernet
574HDLC HDLC
575LAP-F LAP-F
576V.37 V.37
577X.25 MLP X.25 MLP
578X.25 Hunt Group X.25 Hunt Group
579Transp HDLC Transp HDLC
580Interleave Channel Interleave Channel
581FAST Channel FAST Channel
582IP (for APPN HPR in IP Networks) IP (for APPN HPR in IP Networks)
583CATV MAC Layer CATV MAC Layer
584CATV Downstream CATV Downstream
585CATV Upstream CATV Upstream
586Avalon 12MPP Switch Avalon 12MPP Switch
587Tunnel Tunnel
588Coffee Coffee
589Circuit Emulation Service Circuit Emulation Service
590ATM SubInterface ATM SubInterface
591Layer 2 VLAN using 802.1Q Layer 2 VLAN using 802.1Q
592Layer 3 VLAN using IP Layer 3 VLAN using IP
593Layer 3 VLAN using IPX Layer 3 VLAN using IPX
594Digital Power Line Digital Power Line
595Multimedia Mail over IP Multimedia Mail over IP
596DTM DTM
597DCN DCN
598IP Forwarding IP Forwarding
599MSDSL MSDSL
600IEEE 1394 IEEE 1394
601IF-GSN/HIPPI-6400 IF-GSN/HIPPI-6400
602DVB-RCC MAC Layer DVB-RCC MAC Layer
603DVB-RCC Downstream DVB-RCC Downstream
604DVB-RCC Upstream DVB-RCC Upstream
605ATM Virtual ATM Virtual
606MPLS Tunnel MPLS Tunnel
607SRP SRP
608Voice over ATM Voice over ATM
609Voice over Frame Relay Voice over Frame Relay
610ISDL ISDL
611Composite Link Composite Link
612SS7 Signaling Link SS7 Signaling Link
613Proprietary P2P Wireless Proprietary P2P Wireless
614Frame Forward Frame Forward
615RFC1483 Multiprotocol over ATM RFC1483 Multiprotocol over ATM
616USB USB
617IEEE 802.3ad Link Aggregate IEEE 802.3ad Link Aggregate
618BGP Policy Accounting BGP Policy Accounting
619FRF .16 Multilink FR FRF .16 Multilink FR
620H.323 Gatekeeper H.323 Gatekeeper
621H.323 Proxy H.323 Proxy
622Multi-Frequency Signaling Link Multi-Frequency Signaling Link
623HDSL-2 HDSL-2
624S-HDSL S-HDSL
625DS1 Facility Data Link DS1 Facility Data Link
626Packet over SONET/SDH Packet over SONET/SDH
627DVB-ASI Input DVB-ASI Input
628DVB-ASI Output DVB-ASI Output
629Power Line Power Line
630Non Facility Associated Signaling Non Facility Associated Signaling
631TR008 TR008
632GR303 RDT GR303 RDT
633GR303 IDT GR303 IDT
634ISUP ISUP
635Proprietary Wireless MAC Layer Proprietary Wireless MAC Layer
636Proprietary Wireless Downstream Proprietary Wireless Downstream
637Proprietary Wireless Upstream Proprietary Wireless Upstream
638HIPERLAN Type 2 HIPERLAN Type 2
639Proprietary Broadband Wireless Access Point to Mulipoint Proprietary Broadband Wireless Access Point to Mulipoint
640SONET Overhead Channel SONET Overhead Channel
641Digital Wrapper Overhead Channel Digital Wrapper Overhead Channel
642ATM Adaptation Layer 2 ATM Adaptation Layer 2
643Radio MAC Radio MAC
644ATM Radio ATM Radio
645Inter Machine Trunk Inter Machine Trunk
646MVL DSL MVL DSL
647Long Read DSL Long Read DSL
648Frame Relay DLCI Endpoint Frame Relay DLCI Endpoint
649ATM VCI Endpoint ATM VCI Endpoint
650Optical Channel Optical Channel
651Optical Transport Optical Transport
652Proprietary ATM Proprietary ATM
653Voice over Cable Voice over Cable
654TE Link TE Link
655Q.2931 Q.2931
656Virtual Trunk Group Virtual Trunk Group
657SIP Trunk Group SIP Trunk Group
658SIP Signaling SIP Signaling
659CATV Upstream Channel CATV Upstream Channel
660Econet Econet
661FSAN 155Mb PON FSAN 155Mb PON
662FSAN 622Mb PON FSAN 622Mb PON
663Transparent Bridge Transparent Bridge
664Line Group Line Group
665Voice E&M Feature Group Voice E&M Feature Group
666Voice FGD EANA Voice FGD EANA
667Voice DID Voice DID
668MPEG Transport MPEG Transport
6696To4 6To4
670GTP GTP
671Paradyne EtherLoop 1 Paradyne EtherLoop 1
672Paradyne EtherLoop 2 Paradyne EtherLoop 2
673Optical Channel Group Optical Channel Group
674HomePNA HomePNA
675GFP GFP
676ciscoISLvlan ciscoISLvlan
677actelisMetaLOOP actelisMetaLOOP
678Fcip Fcip
679IANA Reserved IANA Reserved
680802.11a 802.11a
681802.11b 802.11b
682802.11g 802.11g
683802.11h 802.11h
684NFS NFS
685CIFS CIFS
686DAFS DAFS
687WebDAV WebDAV
688HTTP HTTP
689FTP FTP
690NDMP NDMP
691Telnet Telnet
692SSH SSH
693SM CLP SM CLP
694SMTP SMTP
695LDAP LDAP
696RDP RDP
697HTTPS HTTPS
698A string that describes the type of ProtocolEndpoint when the Type property of this class (or any of its subclasses) is set to 1 (Other). This property should be set to null when the Type property is any value other than 1. A string that describes the type of ProtocolEndpoint when the Type property of this class (or any of its subclasses) is set to 1 (Other). This property should be set to null when the Type property is any value other than 1.
699A communication point from which data can be sent or received. ProtocolEndpoints link system or computer interfaces to LogicalNetworks. A communication point from which data can be sent or received. ProtocolEndpoints link system or computer interfaces to LogicalNetworks.
7002.15.0 2.15.0
701ProtocolIFType\'s enumeration is limited to IP-related and reserved values for this subclass of ProtocolEndpoint. ProtocolIFType\'s enumeration is limited to IP-related and reserved values for this subclass of ProtocolEndpoint.
702The IPv4 address that this ProtocolEndpoint represents. The IPv4 address that this ProtocolEndpoint represents.
703The IPv6 address that this ProtocolEndpoint represents. The IPv6 address that this ProtocolEndpoint represents.
704The IP address that this ProtocolEndpoint represents, formatted according to the appropriate convention as defined in the AddressType property of this class (e.g., 171.79.6.40). This single property is deprecated to replace it by specific IPv4 and v6 addresses. The IP address that this ProtocolEndpoint represents, formatted according to the appropriate convention as defined in the AddressType property of this class (e.g., 171.79.6.40). This single property is deprecated to replace it by specific IPv4 and v6 addresses.
705The mask for the IPv4 address of this ProtocolEndpoint, if one is defined. The mask for the IPv4 address of this ProtocolEndpoint, if one is defined.
706The prefix length for the IPv6 address of this Protocol Endpoint, if one is defined. The prefix length for the IPv6 address of this Protocol Endpoint, if one is defined.
707An enumeration that describes the format of the Address property. It is deprecated since it is not needed, as the class contains both IPv4 and v6 addresses). An enumeration that describes the format of the Address property. It is deprecated since it is not needed, as the class contains both IPv4 and v6 addresses).
708This property explicitly defines support for different versions of the IP protocol, for this Endpoint. It is deprecated since the ProtocolIFType also provides this functionality by describing an endpoint as IPv4 only (value=4096), IPv6 only (value=4097), or IPv4/v6 (value=4098). This property explicitly defines support for different versions of the IP protocol, for this Endpoint. It is deprecated since the ProtocolIFType also provides this functionality by describing an endpoint as IPv4 only (value=4096), IPv6 only (value=4097), or IPv4/v6 (value=4098).
709IPv4 Only IPv4 Only
710IPv6 Only IPv6 Only
711Both IPv4 and IPv6 Both IPv4 and IPv6
712AddressOrigin identifies the method by which the IP Address, Subnet Mask, and Gateway were assigned to the IPProtocolEndpoint.A value of 3 "Static" shall indicate the values were assigned manually. A value of 4 "DHCP" shall indicate the values were assigned utilizing the Dynamic Host Configuration Protocol. See RFC 2131 and related.
A value of 5 "BOOTP" shall indicate the values were assigned utilizing BOOTP. See RFC 951 and related.
A value of 6 "IPv4 Link Local" shall indicate the values were assigned using the IPv4 Link Local protocol. See RFC 3927.
A value of 7 "DHCPv6" shall indicate the values were assigned using DHCPv6. See RFC 3315.
A value of 8 "IPv6 AutoConfig" shall indicate the values were assinged using the IPv6 AutoConfig Protocol. See RFC 4862.
AddressOrigin identifies the method by which the IP Address, Subnet Mask, and Gateway were assigned to the IPProtocolEndpoint.A value of 3 "Static" shall indicate the values were assigned manually. A value of 4 "DHCP" shall indicate the values were assigned utilizing the Dynamic Host Configuration Protocol. See RFC 2131 and related.
A value of 5 "BOOTP" shall indicate the values were assigned utilizing BOOTP. See RFC 951 and related.
A value of 6 "IPv4 Link Local" shall indicate the values were assigned using the IPv4 Link Local protocol. See RFC 3927.
A value of 7 "DHCPv6" shall indicate the values were assigned using DHCPv6. See RFC 3315.
A value of 8 "IPv6 AutoConfig" shall indicate the values were assinged using the IPv6 AutoConfig Protocol. See RFC 4862.
713Static Static
714DHCP DHCP
715BOOTP BOOTP
716IPv4 Link Local IPv4 Link Local
717DHCPv6 DHCPv6
718IPv6AutoConfig IPv6AutoConfig
719A ProtocolEndpoint that is dedicated to running IP. A ProtocolEndpoint that is dedicated to running IP.
7202.19.1 2.19.1
721The IP address. The IP address.
722To indicate whether the address family for this IP address is v4 or v6. To indicate whether the address family for this IP address is v4 or v6.
723One of the following values: Unicast: Marks the address as a unicast address. This is the default. Anycast: Marks the address as an anycast address. One of the following values: Unicast: Marks the address as a unicast address. This is the default. Anycast: Marks the address as an anycast address.
724Unicast Unicast
725Anycast Anycast
726One of the following values: Active: Set only lasts until next boot. Persistent: Set is persistent (default). One of the following values: Active: Set only lasts until next boot. Persistent: Set is persistent (default).
727Prefix origin of this address. Prefix origin of this address.
728Manual Manual
729WellKnown WellKnown
730RouterAdvertisement RouterAdvertisement
731Suffix origin of this address. Suffix origin of this address.
732Link Link
733Random Random
734Address lifetime state. Address lifetime state.
735Invalid Invalid
736Tentative Tentative
737Duplicate Duplicate
738Deprecated Deprecated
739Preferred Preferred
740Lifetime over which the address is valid. The default value is infinite. Lifetime over which the address is valid. The default value is infinite.
741Lifetime over which the address is preferred. The default value is infinite. Lifetime over which the address is preferred. The default value is infinite.
742Do not use the address as source address for any outgoing packet unless explictly asked to. Do not use the address as source address for any outgoing packet unless explictly asked to.
743Create the IPAddress. Create the IPAddress.
744The representation of IPv4 address and IPv6 address. The representation of IPv4 address and IPv6 address.
745Access or addressing information or a combination of this information for a remote connection. This information can be a host name, network address, or similar information. Access or addressing information or a combination of this information for a remote connection. This information can be a host name, network address, or similar information.
746An enumerated integer that describes the format and interpretation of the AccessInfo property.
206\'Parameterized URL\'- a URL containing ${parameterName} strings. Those strings are intended to be replaced in their entirety by the value of the named parameter. The interpretation of such parameters is not defined by this subclass.
As an example use: If a parameter named \'CompanyURL\' has a value of \'www.DMTF.org\' and the value of AccessInfo was \'http:\${CompanyURL}\', then the resultant URL is intended to be \'http:\www.dmtf.org\'.
An enumerated integer that describes the format and interpretation of the AccessInfo property.
206\'Parameterized URL\'- a URL containing ${parameterName} strings. Those strings are intended to be replaced in their entirety by the value of the named parameter. The interpretation of such parameters is not defined by this subclass.
As an example use: If a parameter named \'CompanyURL\' has a value of \'www.DMTF.org\' and the value of AccessInfo was \'http:\${CompanyURL}\', then the resultant URL is intended to be \'http:\www.dmtf.org\'.
747Host Name Host Name
748IPv4 Address IPv4 Address
749IPv6 Address IPv6 Address
750IPX Address IPX Address
751DECnet Address DECnet Address
752SNA Address SNA Address
753Autonomous System Number Autonomous System Number
754MPLS Label MPLS Label
755IPv4 Subnet Address IPv4 Subnet Address
756IPv6 Subnet Address IPv6 Subnet Address
757IPv4 Address Range IPv4 Address Range
758IPv6 Address Range IPv6 Address Range
759Dial String Dial String
760Ethernet Address Ethernet Address
761Token Ring Address Token Ring Address
762ATM Address ATM Address
763Frame Relay Address Frame Relay Address
764URL URL
765FQDN FQDN
766User FQDN User FQDN
767DER ASN1 DN DER ASN1 DN
768DER ASN1 GN DER ASN1 GN
769Key ID Key ID
770Parameterized URL Parameterized URL
771Describes the format when the property InfoFormat is set to 1 (Other). Describes the format when the property InfoFormat is set to 1 (Other).
772The AccessContext property identifies the role this RemoteServiceAccessPoint is playing in the hosting system. The AccessContext property identifies the role this RemoteServiceAccessPoint is playing in the hosting system.
773Default Gateway Default Gateway
774DNS Server DNS Server
775SNMP Trap Destination SNMP Trap Destination
776MPLS Tunnel Destination MPLS Tunnel Destination
777DHCP Server DHCP Server
778SMTP Server SMTP Server
779LDAP Server LDAP Server
780Network Time Protocol (NTP) Server Network Time Protocol (NTP) Server
781Management Service Management Service
782When the AccessContext property contains a value of 1, "Other" then this is a free form string providing more information about the role of RemoteServiceAccessPoint in the hosting system. When the AccessContext property contains a value of 1, "Other" then this is a free form string providing more information about the role of RemoteServiceAccessPoint in the hosting system.
783RemoteServiceAccessPoint describes access or addressing information or a combination of this information for a remote connection that is known to a local network element. This information is scoped or contained by the local network element, because this is the context in which the connection is remote.
The relevance of the remote access point and information on its use are described by subclassing RemoteServiceAccessPoint or by associating to it.
RemoteServiceAccessPoint describes access or addressing information or a combination of this information for a remote connection that is known to a local network element. This information is scoped or contained by the local network element, because this is the context in which the connection is remote.
The relevance of the remote access point and information on its use are described by subclassing RemoteServiceAccessPoint or by associating to it.
7842.21.0 2.21.0
785Network address of neighbor. Network address of neighbor.
786User-friendly interface index. User-friendly interface index.
787User-friendly interface name. User-friendly interface name.
788Link layer address of neighbor. Link layer address of neighbor.
789One of the following values: - active: Address will disappear on next boot. - persistent: Address will be persistent. This is the default. One of the following values: - active: Address will disappear on next boot. - persistent: Address will be persistent. This is the default.
790Neighbor Discovery State. Neighbor Discovery State.
791Unreachable Unreachable
792Incomplete Incomplete
793Delay Delay
794Stale Stale
795Reachable Reachable
796Permanent Permanent
797To indicate whether the address family for this neighbor is v4 or v6. To indicate whether the address family for this neighbor is v4 or v6.
798Create the Neighbor. Create the Neighbor.
799Represents the Neighbor in TCPIP WMIv2 Represents the Neighbor in TCPIP WMIv2
800A label or identifier for the LAN Segment to which the Endpoint is connected. If the Endpoint is not currently active/connected or this information is not known, then LANID is NULL. A label or identifier for the LAN Segment to which the Endpoint is connected. If the Endpoint is not currently active/connected or this information is not known, then LANID is NULL.
801An indication of the kind of technology used on the LAN. This property is deprecated in lieu of ProtocolType, which is an enumeration inherited from ProtocolEndpoint and which includes the Values specified here. An indication of the kind of technology used on the LAN. This property is deprecated in lieu of ProtocolType, which is an enumeration inherited from ProtocolEndpoint and which includes the Values specified here.
802A free-form string that describes the type of technology used on the LAN when the value of the LANType property is equal to 1 (i.e., "Other"). This property is deprecated since its purpose overlaps with OtherTypeDescription, which which is inherited from ProtocolEndpoint. A free-form string that describes the type of technology used on the LAN when the value of the LANType property is equal to 1 (i.e., "Other"). This property is deprecated since its purpose overlaps with OtherTypeDescription, which which is inherited from ProtocolEndpoint.
803The principal unicast address used in communication with the LANEndpoint. The MAC address is formatted as twelve hexadecimal digits (e.g., "010203040506"), with each pair representing one of the six octets of the MAC address in "canonical" bit order according to RFC 2469. The principal unicast address used in communication with the LANEndpoint. The MAC address is formatted as twelve hexadecimal digits (e.g., "010203040506"), with each pair representing one of the six octets of the MAC address in "canonical" bit order according to RFC 2469.
804Other unicast addresses that may be used to communicate with the LANEndpoint. Other unicast addresses that may be used to communicate with the LANEndpoint.
805Multicast addresses to which the LANEndpoint listens. Multicast addresses to which the LANEndpoint listens.
806The largest information field that may be sent or received by the LANEndpoint. The largest information field that may be sent or received by the LANEndpoint.
807Bits Bits
808A communication endpoint which, when its associated interface device is connected to a LAN, may send and receive data frames. LANEndpoints include Ethernet, Token Ring and FDDI interfaces. A communication endpoint which, when its associated interface device is connected to a LAN, may send and receive data frames. LANEndpoints include Ethernet, Token Ring and FDDI interfaces.
8092.7.0 2.7.0
810To indicate whether the address family for this interface is v4 or v6. To indicate whether the address family for this interface is v4 or v6.
811Whether forwarding is enabled for incoming packets on this interface. Default is Disabled. Whether forwarding is enabled for incoming packets on this interface. Default is Disabled.
812Whether MSS clamping is enabled for outgoing forwarded packets on this interface. Default is Disabled. Whether MSS clamping is enabled for outgoing forwarded packets on this interface. Default is Disabled.
813Whether router advertisments are to be sent on this interface. Default is Disabled. Whether router advertisments are to be sent on this interface. Default is Disabled.
814The Network Layer MTU of this interface. The default is the natural MTU of the link. The Network Layer MTU of this interface. The default is the natural MTU of the link.
815Interface metric, added to route metrics for all routes over the interface. Default is automatic. Interface metric, added to route metrics for all routes over the interface. Default is automatic.
816Whether neighbor unreachability detection is enabled. Default depends on type of interface. Whether neighbor unreachability detection is enabled. Default depends on type of interface.
817Base reachable time (in ms). Base reachable time (in ms).
818Retransmit time (in ms). Retransmit time (in ms).
819Number of duplicate address detection transmits. Number of duplicate address detection transmits.
820Can be enabled, disabled, or controlled by DHCP. Can be enabled, disabled, or controlled by DHCP.
821ControlledByDHCP ControlledByDHCP
822Unchanged Unchanged
823Whether to use a stateful protocol (i.e., DHCP) to obtain an address. Setting this parameter will have no effect on an interface that has router discovery enabled & advertising disabled. In that case the parameter is controlled by router discovery. Whether to use a stateful protocol (i.e., DHCP) to obtain an address. Setting this parameter will have no effect on an interface that has router discovery enabled & advertising disabled. In that case the parameter is controlled by router discovery.
824Whether to use a stateful protocol (i.e., DHCP) to obtain configuration information other than addresses. Setting this parameter will have no effect on an interface that has router discovery enabled & advertising disabled. In that case the parameter is controlled by router discovery. Whether to use a stateful protocol (i.e., DHCP) to obtain configuration information other than addresses. Setting this parameter will have no effect on an interface that has router discovery enabled & advertising disabled. In that case the parameter is controlled by router discovery.
825Whether weak host sends are enabled. Whether weak host sends are enabled.
826Whether weak host receives are enabled. Whether weak host receives are enabled.
827Ignores default routes on the interface. Default: Disabled. Ignores default routes on the interface. Default: Disabled.
828Router lifetime. Default is 1800 seconds. Router lifetime. Default is 1800 seconds.
829Whether the interface should advertise itself as a default router regardless of whether the node has a default route itself. Valid only for advertising interfaces. Whether the interface should advertise itself as a default router regardless of whether the node has a default route itself. Valid only for advertising interfaces.
830Hop limit in outbound traffic. Hop limit in outbound traffic.
831- active: Set only lasts until next boot. - persistent: Set is persistent. - active: Set only lasts until next boot. - persistent: Set is persistent.
832To indicate that ARP, Neighbor Discovery, Wake-On-LAN patterns should be turned on. To indicate that ARP, Neighbor Discovery, Wake-On-LAN patterns should be turned on.
833To indicate that direct MAC Wake-On-LAN patterns should be turned on. To indicate that direct MAC Wake-On-LAN patterns should be turned on.
834To control ECN codepoints for outgoing packets. Four possible values: - Disabled - UseEct1 - UseEct0 - AppDecide To control ECN codepoints for outgoing packets. Four possible values: - Disabled - UseEct1 - UseEct0 - AppDecide
835UseEct1 UseEct1
836UseEct0 UseEct0
837AppDecide AppDecide
838To control whether DHCP is enabled on this IPInterface. Two possible values: - Disabled - Enabled To control whether DHCP is enabled on this IPInterface. Two possible values: - Disabled - Enabled
839Reachable time (in ms). Reachable time (in ms).
840To control whether to use automatic metric. Two possible values: - Disabled - Enabled To control whether to use automatic metric. Two possible values: - Disabled - Enabled
841To show whether to neighbor discovery is supported. Two possible values: - No - Yes To show whether to neighbor discovery is supported. Two possible values: - No - Yes
842To show whether the interface is connected or not. Two possible values: - Connected - Disconnected To show whether the interface is connected or not. Two possible values: - Connected - Disconnected
843Disconnected Disconnected
844Connected Connected
845Duplicate address detection retransmit time (in ms). Duplicate address detection retransmit time (in ms).
846Routing compartment identifier. Routing compartment identifier.
847Network isolation identifier. Network isolation identifier.
848Locally unique identifier of the lowest interface in the stack. Locally unique identifier of the lowest interface in the stack.
849Represents the Interface class of Microsoft TCPIP WMIv2 provider. Represents the Interface class of Microsoft TCPIP WMIv2 provider.
850Default HopLimit of packets sent. Default HopLimit of packets sent.
851Maximum number of neighbor cache entries. Maximum number of neighbor cache entries.
852Maximum number of route cache entries. Maximum number of route cache entries.
853Maximum size of reassembly buffer in bytes. Maximum size of reassembly buffer in bytes.
854Whether the path cache is updated in response to ICMP redirect packets. Whether the path cache is updated in response to ICMP redirect packets.
855Determines the behavior for source routed packets. Per RFC 5095 support for forwarding of source routed IPv6 packets has been removed, and the setting forward now has the same effect as dontforward. Determines the behavior for source routed packets. Per RFC 5095 support for forwarding of source routed IPv6 packets has been removed, and the setting forward now has the same effect as dontforward.
856Forward Forward
857DontForward DontForward
858Drop Drop
859Whether media sense is enabled or not. Whether media sense is enabled or not.
860Whether media sense logging is enabled or not. Whether media sense logging is enabled or not.
861Level of multicast support. - None: Multicast packets can neither be sent nor received - SendOnly: Multicast packets can be sent but not received - All: Multicast packets can be sent as well as received Level of multicast support. - None: Multicast packets can neither be sent nor received - SendOnly: Multicast packets can be sent but not received - All: Multicast packets can be sent as well as received
862None None
863SendOnly SendOnly
864All All
865Maximum IGMP/MLD version supported by the host. Maximum IGMP/MLD version supported by the host.
866Version1 Version1
867Version2 Version2
868Version3 Version3
869Whether multicast packets can be forwarded. Whether multicast packets can be forwarded.
870Whether fragments should be collected into groups before being forwarded. Whether fragments should be collected into groups before being forwarded.
871Whether interface identifiers are randomized. Whether interface identifiers are randomized.
872Whether the computer will respond to ICMP Address mask packets Whether the computer will respond to ICMP Address mask packets
873Whether dead gateway detection is enabled. Default is enabled. Whether dead gateway detection is enabled. Default is enabled.
874The base class of IPv4 and IPv6 protocol for Microsoft TCPIP WMIv2 provider. The base class of IPv4 and IPv6 protocol for Microsoft TCPIP WMIv2 provider.
875Minimum value of IPv4 MTU. The default value is 576. The value can range between 352 and 576. Minimum value of IPv4 MTU. The default value is 576. The value can range between 352 and 576.
876Represents the IPv4 protocol of Microsoft TCPIP WMIv2 provider. Represents the IPv4 protocol of Microsoft TCPIP WMIv2 provider.
877Whether temporary addresses are enabled. It takes one of the following values: - No: Don't use temporary addresses. - Yes: Use temporary addresses. - Always: Use temporary addresses and always generate a new temporary address each time a network is connected. Whether temporary addresses are enabled. It takes one of the following values: - No: Don't use temporary addresses. - Yes: Use temporary addresses. - Always: Use temporary addresses and always generate a new temporary address each time a network is connected.
878Always Always
879Maximum duplicate address detection attempts for temporary addresses. The default value is 3. Maximum duplicate address detection attempts for temporary addresses. The default value is 3.
880Maximum lifetime over which a temporary address is valid. The default value is 7 days. Maximum lifetime over which a temporary address is valid. The default value is 7 days.
881Maximum lifetime over which a temporary address is preferred. The default value is 1 day. Maximum lifetime over which a temporary address is preferred. The default value is 1 day.
882Time prior to deprecating a temporary address when a new address is generated. The default value is 5 seconds. Time prior to deprecating a temporary address when a new address is generated. The default value is 5 seconds.
883Maximum time to desynchronize temporary address preferred lifetimes. The default value is 10 minutes. Maximum time to desynchronize temporary address preferred lifetimes. The default value is 10 minutes.
884Represents the IPv6 protocol for Microsoft TCPIP WMIv2 provider. Represents the IPv6 protocol for Microsoft TCPIP WMIv2 provider.
885Prefix of the policy. Prefix of the policy.
886Precedence value in the policy table, used for sorting destination addresses. Precedence value in the policy table, used for sorting destination addresses.
887Label value that allows for policies that prefer a particular source address prefix for use with a destination address prefix. Label value that allows for policies that prefer a particular source address prefix for use with a destination address prefix.
888One of the following values: Active: Change only lasts until next boot. Persistent: Change is persistent. One of the following values: Active: Change only lasts until next boot. Persistent: Change is persistent.
889Create the PrefixPolicy. Create the PrefixPolicy.
890Represents the prefix policy for Microsoft TCPIP WMIv2 provider. Represents the prefix policy for Microsoft TCPIP WMIv2 provider.
891A user-friendly name of this policy-related object. A user-friendly name of this policy-related object.
892An array of keywords for characterizing / categorizing policy objects. Keywords are of one of two types:
- Keywords defined in this and other MOFs, or in DMTF white papers. These keywords provide a vendor- independent, installation-independent way of characterizing policy objects.
- Installation-dependent keywords for characterizing policy objects. Examples include \'Engineering\', \'Billing\', and \'Review in December 2000\'.
This MOF defines the following keywords: \'UNKNOWN\', \'CONFIGURATION\', \'USAGE\', \'SECURITY\', \'SERVICE\', \'MOTIVATIONAL\', \'INSTALLATION\', and \'EVENT\'. These concepts are self-explanatory and are further discussed in the SLA/Policy White Paper. One additional keyword is defined: \'POLICY\'. The role of this keyword is to identify policy-related instances that may not be otherwise identifiable, in some implementations. The keyword \'POLICY\' is NOT mutually exclusive of the other keywords specified above.
An array of keywords for characterizing / categorizing policy objects. Keywords are of one of two types:
- Keywords defined in this and other MOFs, or in DMTF white papers. These keywords provide a vendor- independent, installation-independent way of characterizing policy objects.
- Installation-dependent keywords for characterizing policy objects. Examples include \'Engineering\', \'Billing\', and \'Review in December 2000\'.
This MOF defines the following keywords: \'UNKNOWN\', \'CONFIGURATION\', \'USAGE\', \'SECURITY\', \'SERVICE\', \'MOTIVATIONAL\', \'INSTALLATION\', and \'EVENT\'. These concepts are self-explanatory and are further discussed in the SLA/Policy White Paper. One additional keyword is defined: \'POLICY\'. The role of this keyword is to identify policy-related instances that may not be otherwise identifiable, in some implementations. The keyword \'POLICY\' is NOT mutually exclusive of the other keywords specified above.
893An abstract class defining the common properties of the policy managed elements derived from CIM_Policy. The subclasses are used to create rules and groups of rules that work together to form a coherent set of policies within an administrative domain or set of domains. An abstract class defining the common properties of the policy managed elements derived from CIM_Policy. The subclasses are used to create rules and groups of rules that work together to form a coherent set of policies within an administrative domain or set of domains.
894The name of the class or the subclass used in the creation of the System object in whose scope this PolicyAction is defined.

This property helps to identify the System object in whose scope this instance of PolicyAction exists. For a rule-specific PolicyAction, this is the System in whose context the PolicyRule is defined. For a reusable PolicyAction, this is the instance of PolicyRepository (which is a subclass of System) that holds the Action.

Note that this property, and the analogous property SystemName, do not represent propagated keys from an instance of the class System. Instead, they are properties defined in the context of this class, which repeat the values from the instance of System to which this PolicyAction is related, either directly via the PolicyActionInPolicyRepository association or indirectly via the PolicyActionInPolicyRule aggregation.
The name of the class or the subclass used in the creation of the System object in whose scope this PolicyAction is defined.

This property helps to identify the System object in whose scope this instance of PolicyAction exists. For a rule-specific PolicyAction, this is the System in whose context the PolicyRule is defined. For a reusable PolicyAction, this is the instance of PolicyRepository (which is a subclass of System) that holds the Action.

Note that this property, and the analogous property SystemName, do not represent propagated keys from an instance of the class System. Instead, they are properties defined in the context of this class, which repeat the values from the instance of System to which this PolicyAction is related, either directly via the PolicyActionInPolicyRepository association or indirectly via the PolicyActionInPolicyRule aggregation.
895The name of the System object in whose scope this PolicyAction is defined.

This property completes the identification of the System object in whose scope this instance of PolicyAction exists. For a rule-specific PolicyAction, this is the System in whose context the PolicyRule is defined. For a reusable PolicyAction, this is the instance of PolicyRepository (which is a subclass of System) that holds the Action.
The name of the System object in whose scope this PolicyAction is defined.

This property completes the identification of the System object in whose scope this instance of PolicyAction exists. For a rule-specific PolicyAction, this is the System in whose context the PolicyRule is defined. For a reusable PolicyAction, this is the instance of PolicyRepository (which is a subclass of System) that holds the Action.
896For a rule-specific PolicyAction, the CreationClassName of the PolicyRule object with which this Action is associated. For a reusable PolicyAction, a special value, \'NO RULE\', should be used to indicate that this Action is reusable and not associated with a single PolicyRule. For a rule-specific PolicyAction, the CreationClassName of the PolicyRule object with which this Action is associated. For a reusable PolicyAction, a special value, \'NO RULE\', should be used to indicate that this Action is reusable and not associated with a single PolicyRule.
897For a rule-specific PolicyAction, the name of the PolicyRule object with which this Action is associated. For a reusable PolicyAction, a special value, \'NO RULE\', should be used to indicate that this Action is reusable and not associated with a single PolicyRule. For a rule-specific PolicyAction, the name of the PolicyRule object with which this Action is associated. For a reusable PolicyAction, a special value, \'NO RULE\', should be used to indicate that this Action is reusable and not associated with a single PolicyRule.
898A user-friendly name of this PolicyAction. A user-friendly name of this PolicyAction.
899DoActionLogging causes a log message to be generated when the action is performed. DoActionLogging causes a log message to be generated when the action is performed.
900A class representing a rule-specific or reusable policy action to be performed if the PolicyConditions for a Policy Rule evaluate to TRUE. Since all operational details of a PolicyAction are provided in subclasses of this object, this class is abstract. A class representing a rule-specific or reusable policy action to be performed if the PolicyConditions for a Policy Rule evaluate to TRUE. Since all operational details of a PolicyAction are provided in subclasses of this object, this class is abstract.
9012.8.0 2.8.0
902One of the following values: - DatacenterCustom, InternetCustom, Datacenter, Compat, Internet, Automatic. One of the following values: - DatacenterCustom, InternetCustom, Datacenter, Compat, Internet, Automatic.
903Controls TCP retransmission timeout in milliseconds. Value can range from 20 milliseconds to 300 milliseconds. Controls TCP retransmission timeout in milliseconds. Value can range from 20 milliseconds to 300 milliseconds.
904Controls initial congestion window in Maximum Segment Size. Values can range from 2 to 64 MSS. Controls initial congestion window in Maximum Segment Size. Values can range from 2 to 64 MSS.
905Controls whether congestion window is restarted. Controls whether congestion window is restarted.
906One of the following values: - Disabled: Disable memory pressure protection. - Enabled : Enable memory pressure protection. - Default : Restore memory pressure protection state to the system default. One of the following values: - Disabled: Disable memory pressure protection. - Enabled : Enable memory pressure protection. - Default : Restore memory pressure protection state to the system default.
907Default Default
908Controls the congestion provider. One of the following values: - Default - CTCP - DCTCP Controls the congestion provider. One of the following values: - Default - CTCP - DCTCP
909CTCP CTCP
910DCTCP DCTCP
911One of the following values: - Disabled: Fix the receive window at its default value. - HighlyRestricted: Allow the receive window to grow beyond its default value, but do so very conservatively. - Restricted: Allow the receive window to grow beyond its default value, but limit such growth in some scenarios. - Normal: Allow the receive window to grow to accommodate almost all scenarios. - Experimental: Allow the receive window to grow to accomodate extreme scenarios. One of the following values: - Disabled: Fix the receive window at its default value. - HighlyRestricted: Allow the receive window to grow beyond its default value, but do so very conservatively. - Restricted: Allow the receive window to grow beyond its default value, but limit such growth in some scenarios. - Normal: Allow the receive window to grow to accommodate almost all scenarios. - Experimental: Allow the receive window to grow to accomodate extreme scenarios.
912HighlyRestricted HighlyRestricted
913Restricted Restricted
914Normal Normal
915Experimental Experimental
916Controls the TCP ECN Capability. Disabled by default in client, enabled by default in server. The value can be one of the following values: - Disabled: Disable ECN Capability. - Enabled : Enable ECN Capability. Controls the TCP ECN Capability. Disabled by default in client, enabled by default in server. The value can be one of the following values: - Disabled: Disable ECN Capability. - Enabled : Enable ECN Capability.
917One of the following values: - Disabled: Disable RFC 1323 timestamps. - Enabled: Enable RFC 1323 timestamps. One of the following values: - Disabled: Disable RFC 1323 timestamps. - Enabled: Enable RFC 1323 timestamps.
918Connect (SYN) retransmit timeout (in milliseconds). default: 3000. Connect (SYN) retransmit timeout (in milliseconds). default: 3000.
919One of the following values: - Disabled: Disable window scaling heuristics. - Enabled : Enable window scaling heuristics. One of the following values: - Disabled: Disable window scaling heuristics. - Enabled : Enable window scaling heuristics.
920Starting port number between 1 and 65535. Starting port number between 1 and 65535.
921Number of ports starting from the DynamicPortRangeStartPort for dynamic port range. Number of ports starting from the DynamicPortRangeStartPort for dynamic port range.
922One of the following values: - Disabled: Set the receive window at its default value. - HighlyRestricted: Allow the receive window to grow beyond its default value, but do so very conservatively. - Restricted: Allow the receive window to grow beyond its default value, but limit such growth in some scenarios. - Normal: Allow the receive window to grow to accomodate almost all scenarios. - Experimental: Allow the receive window to grow to accomodate extreme scenarios. One of the following values: - Disabled: Set the receive window at its default value. - HighlyRestricted: Allow the receive window to grow beyond its default value, but do so very conservatively. - Restricted: Allow the receive window to grow beyond its default value, but limit such growth in some scenarios. - Normal: Allow the receive window to grow to accomodate almost all scenarios. - Experimental: Allow the receive window to grow to accomodate extreme scenarios.
923The effective setting of auto-tuning level. This can be one of the following value: - Local: the effective auto-tuning level is from the local setting - GroupPolicy: the effective auto-tuning level is from the group policy setting The effective setting of auto-tuning level. This can be one of the following value: - Local: the effective auto-tuning level is from the local setting - GroupPolicy: the effective auto-tuning level is from the group policy setting
924GroupPolicy GroupPolicy
925Controls TCP delayed ACK time-out in milliseconds. Value can range from 10 milliseconds to 600 milliseconds. Controls TCP delayed ACK time-out in milliseconds. Value can range from 10 milliseconds to 600 milliseconds.
926Specifies the number of ACKs that will be outstanding before the delayed ACK timer is ignored. Value can range from 1 to 255. Specifies the number of ACKs that will be outstanding before the delayed ACK timer is ignored. Value can range from 1 to 255.
927Controls whether Automatic template chooses between custom templates. - Disabled: Automatic chooses between Datacenter and Internet. - Enabled: Automatic chooses between DatacenterCustom and InternetCustom. Controls whether Automatic template chooses between custom templates. - Disabled: Automatic chooses between Datacenter and Internet. - Enabled: Automatic chooses between DatacenterCustom and InternetCustom.
928One of the following values: - Disabled: Disable rtt resiliency for non sack clients. - Enabled : Enable rtt resiliency for non sack clients. One of the following values: - Disabled: Disable rtt resiliency for non sack clients. - Enabled : Enable rtt resiliency for non sack clients.
929One of the following values: - Disabled: Disable force window scaling on retransmit. - Enabled : Enable force window scaling on retransmit. One of the following values: - Disabled: Disable force window scaling on retransmit. - Enabled : Enable force window scaling on retransmit.
930Specifies the number of connect retry attempts using SYN packets. Value can range from 2 to 8. Specifies the number of connect retry attempts using SYN packets. Value can range from 2 to 8.
931Starting automatic reuse port number between 1025 and 65535. Starting automatic reuse port number between 1025 and 65535.
932Number of ports starting from the AutoReusePortRangeStartPort for automatic reuse port range. Number of ports starting from the AutoReusePortRangeStartPort for automatic reuse port range.
933Represents the TCP parameter setting for Microsoft TCPIP WMIv2 provider. Represents the TCP parameter setting for Microsoft TCPIP WMIv2 provider.
934Represents the UDP parameter setting for Microsoft TCPIP WMIv2 provider. Represents the UDP parameter setting for Microsoft TCPIP WMIv2 provider.
935The Name property defines the label by which the Filter Entry is known and uniquely identified. The Name property defines the label by which the Filter Entry is known and uniquely identified.
936The scoping ComputerSystem\'s CreationClassName. The scoping ComputerSystem\'s CreationClassName.
937The scoping ComputerSystem\'s Name. The scoping ComputerSystem\'s Name.
938Boolean indicating that the match condition described in the properties of the FilterEntryBase subclass should be negated. This property is defined for ease of use when filtering on simple negations - for example, to select all source ports except 162. It is not recommended that this Boolean be set to True when filtering on multiple criteria, such as defining an IPHeadersFilter based on source/destination addresses, ports, and DiffServ Code Points. Boolean indicating that the match condition described in the properties of the FilterEntryBase subclass should be negated. This property is defined for ease of use when filtering on simple negations - for example, to select all source ports except 162. It is not recommended that this Boolean be set to True when filtering on multiple criteria, such as defining an IPHeadersFilter based on source/destination addresses, ports, and DiffServ Code Points.
939A FilterList aggregates instances of (subclasses of) FilterEntryBase via the aggregation EntriesInFilterList. The filter entries are always ANDed together when grouped by the FilterList. Note that it is possible to aggregate different types of filters into a single FilterList - for example, packet header filters (represented by the IpHeadersFilter class) and IPsec security filters.

A FilterList is weak to the network device (e.g., the ComputerSystem) that contains it. Hence, the ComputerSystem keys are propagated to this class.
A FilterList aggregates instances of (subclasses of) FilterEntryBase via the aggregation EntriesInFilterList. The filter entries are always ANDed together when grouped by the FilterList. Note that it is possible to aggregate different types of filters into a single FilterList - for example, packet header filters (represented by the IpHeadersFilter class) and IPsec security filters.

A FilterList is weak to the network device (e.g., the ComputerSystem) that contains it. Hence, the ComputerSystem keys are propagated to this class.
940One of the following protocols: - TCP - UDP One of the following protocols: - TCP - UDP
941The start of the local port number. The start of the local port number.
942The end of the local port number. The end of the local port number.
943The start of the remote port number. The start of the remote port number.
944The end of the remote port number. The end of the remote port number.
945The destination prefix to be filtered. The destination prefix to be filtered.
946The associated TCPSetting's SettingName. The associated TCPSetting's SettingName.
947Represents the filter for transport protocol parameter setting for Microsoft TCPIP WMI v2 provider. Represents the filter for transport protocol parameter setting for Microsoft TCPIP WMI v2 provider.
948Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following \'preferred\' algorithm:
:
Where and are separated by a colon \':\', and where MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity creating/defining the InstanceID, or is a registered ID that is assigned to the business entity by a recognized global authority. (This is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness MUST NOT contain a colon (\':\'). When using this algorithm, the first colon to appear in InstanceID MUST appear between and . (For DMTF defined instances, the \'preferred\' algorithm MUST be used with the set to \'CIM\'.)
MUST include either a vendor specified unique identifier, or if mapping from an ITU M.3100 environment, the trailID, connectionID or subNetworkConnectionID of the instances of PipeR2.
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. In order to ensure uniqueness within the NameSpace, the value of InstanceID SHOULD be constructed using the following \'preferred\' algorithm:
:
Where and are separated by a colon \':\', and where MUST include a copyrighted, trademarked or otherwise unique name that is owned by the business entity creating/defining the InstanceID, or is a registered ID that is assigned to the business entity by a recognized global authority. (This is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness MUST NOT contain a colon (\':\'). When using this algorithm, the first colon to appear in InstanceID MUST appear between and . (For DMTF defined instances, the \'preferred\' algorithm MUST be used with the set to \'CIM\'.)
MUST include either a vendor specified unique identifier, or if mapping from an ITU M.3100 environment, the trailID, connectionID or subNetworkConnectionID of the instances of PipeR2.
949Indicates whether the pipe is bi-directional (value = 2), unidirectional (value = 3), or this information is not known (value = 0). For unidirectional pipes, the source and sink are indicated by a property (SourceOrSink) of the association, EndpointOfNetworkPipe. Indicates whether the pipe is bi-directional (value = 2), unidirectional (value = 3), or this information is not known (value = 0). For unidirectional pipes, the source and sink are indicated by a property (SourceOrSink) of the association, EndpointOfNetworkPipe.
950Bi-Directional Bi-Directional
951Unidirectional Unidirectional
952Indicates whether the pipe is composed of lower-level pipes, and if so, how these lower-level pipes are aggregated (in parallel or in sequence). The specific instances of NetworkPipe that are combined are described using the NetworkPipeComposition association.

In the context of M.3100, the ability to be composed of lower-level pipes is modeled as a Trail. A Trail is made up of one or more Connections. (Note that both Trails and Connections are subclasses of Pipe). Because of the flexibility of the NetworkPipeComposition association, there is no need to subclass NetworkPipe, as was done in M.3100, but merely to instantiate the NetworkPipeComposition association to describe the bundling of the lower-level pipes (i.e., the connections), or the sequencing of them.
Indicates whether the pipe is composed of lower-level pipes, and if so, how these lower-level pipes are aggregated (in parallel or in sequence). The specific instances of NetworkPipe that are combined are described using the NetworkPipeComposition association.

In the context of M.3100, the ability to be composed of lower-level pipes is modeled as a Trail. A Trail is made up of one or more Connections. (Note that both Trails and Connections are subclasses of Pipe). Because of the flexibility of the NetworkPipeComposition association, there is no need to subclass NetworkPipe, as was done in M.3100, but merely to instantiate the NetworkPipeComposition association to describe the bundling of the lower-level pipes (i.e., the connections), or the sequencing of them.
953No Lower-Level Composition No Lower-Level Composition
954Combined In Parallel Combined In Parallel
955Combined In Sequence Combined In Sequence
956NetworkPipe is a subclass of EnabledLogicalElement, representing the state and management of a connection or trail between endpoints. This object is different than the association between the endpoints (CIM_ActiveConnection) since the emphasis is NOT on the endpoints but on the management of the pipe itself - its state, configuration, etc. NetworkPipes are defined in the context of a CIM_Network and represent the \'transfer of information . . . between . . . endpoints\'. These concepts are aligned with the definition of the Pipe object in ITU\'s M.3100 specification. NetworkPipe is a subclass of EnabledLogicalElement, representing the state and management of a connection or trail between endpoints. This object is different than the association between the endpoints (CIM_ActiveConnection) since the emphasis is NOT on the endpoints but on the management of the pipe itself - its state, configuration, etc. NetworkPipes are defined in the context of a CIM_Network and represent the \'transfer of information . . . between . . . endpoints\'. These concepts are aligned with the definition of the Pipe object in ITU\'s M.3100 specification.
957The local address of the connection. The local address of the connection.
958The local port of the connection. The local port of the connection.
959The PID of the owning process. The PID of the owning process.
960Creation time. Creation time.
961Represents the transport connection class for Microsoft TCPIP WMIv2 provider. Represents the transport connection class for Microsoft TCPIP WMIv2 provider.
962The remote address of the TCP connection. The remote address of the TCP connection.
963The remote port of the TCP connection. The remote port of the TCP connection.
964The state of the TCP connection. The value can be: - Closed, - Listen, - SynSent, - SynReceived, - Established, - FinWait1, - FinWait2, - CloseWait, - Closing, - LastAck, - TimeWait The state of the TCP connection. The value can be: - Closed, - Listen, - SynSent, - SynReceived, - Established, - FinWait1, - FinWait2, - CloseWait, - Closing, - LastAck, - TimeWait
965Closed Closed
966Listen Listen
967SynSent SynSent
968SynReceived SynReceived
969Established Established
970FinWait1 FinWait1
971FinWait2 FinWait2
972CloseWait CloseWait
973Closing Closing
974LastAck LastAck
975TimeWait TimeWait
976DeleteTCB DeleteTCB
977The setting applied for this TCP connection. The value can be: - Internet, - Datacenter, - Compat, - InternetCustom, - DatacenterCustom The setting applied for this TCP connection. The value can be: - Internet, - Datacenter, - Compat, - InternetCustom, - DatacenterCustom
978Internet Internet
979Datacenter Datacenter
980Compat Compat
981DatacenterCustom DatacenterCustom
982InternetCustom InternetCustom
983The TCP_CONNECTION_OFFLOAD_STATE of the TCP connection. The TCP_CONNECTION_OFFLOAD_STATE of the TCP connection.
984InHost InHost
985Offloading Offloading
986Offloaded Offloaded
987Uploading Uploading
988Represents the TCP connection class for Microsoft TCPIP WMIv2 provider. Represents the TCP connection class for Microsoft TCPIP WMIv2 provider.
989Represents the UDP connection class for Microsoft TCPIP WMIv2 provider. Represents the UDP connection class for Microsoft TCPIP WMIv2 provider.
990Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
For DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm:
:
Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and .
is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance.
For DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
991The user-friendly name for this instance of SettingData. In addition, the user-friendly name can be used as an index property for a search or query. (Note: The name does not have to be unique within a namespace.) The user-friendly name for this instance of SettingData. In addition, the user-friendly name can be used as an index property for a search or query. (Note: The name does not have to be unique within a namespace.)
992CIM_SettingData is used to represent configuration and and operational parameters for CIM_ManagedElement instances. There are a number of different uses of CIM_SettingData supported in the model today. Additional uses may be defined in the future.
Instances of CIM_SettingData may represent Aspects of a CIM_ManagedElement instance. This is modeled using the CIM_SettingsDefineState association. CIM_SettingData may be used to define capabilities when associated to an instance of CIM_Capabilities through the CIM_SettingsDefineCapabilities association.
Instances of CIM_SettingData may represent different types of configurations for a CIM_ManagedElement, including persistent configurations, in progress configuration changes, or requested configurations. The CIM_ElementSettingData association is used to model the relationship between a CIM_SettingData instance and the CIM_ManagedElement for which it is a configuration.
When an instance of CIM_SettingData represents a configuration, the current operational values for the parameters of the element are reflected by properties in the Element itself or by properties in its associations. These properties do not have to be the same values that are present in the SettingData object. For example, a modem might have a SettingData baud rate of 56Kb/sec but be operating at 19.2Kb/sec.
Note: The CIM_SettingData class is very similar to CIM_Setting, yet both classes are present in the model because many implementations have successfully used CIM_Setting. However, issues have arisen that could not be resolved without defining a new class. Therefore, until a new major release occurs, both classes will exist in the model. Refer to the Core White Paper for additional information. SettingData instances can be aggregated together into higher- level SettingData objects using ConcreteComponent associations.
CIM_SettingData is used to represent configuration and and operational parameters for CIM_ManagedElement instances. There are a number of different uses of CIM_SettingData supported in the model today. Additional uses may be defined in the future.
Instances of CIM_SettingData may represent Aspects of a CIM_ManagedElement instance. This is modeled using the CIM_SettingsDefineState association. CIM_SettingData may be used to define capabilities when associated to an instance of CIM_Capabilities through the CIM_SettingsDefineCapabilities association.
Instances of CIM_SettingData may represent different types of configurations for a CIM_ManagedElement, including persistent configurations, in progress configuration changes, or requested configurations. The CIM_ElementSettingData association is used to model the relationship between a CIM_SettingData instance and the CIM_ManagedElement for which it is a configuration.
When an instance of CIM_SettingData represents a configuration, the current operational values for the parameters of the element are reflected by properties in the Element itself or by properties in its associations. These properties do not have to be the same values that are present in the SettingData object. For example, a modem might have a SettingData baud rate of 56Kb/sec but be operating at 19.2Kb/sec.
Note: The CIM_SettingData class is very similar to CIM_Setting, yet both classes are present in the model because many implementations have successfully used CIM_Setting. However, issues have arisen that could not be resolved without defining a new class. Therefore, until a new major release occurs, both classes will exist in the model. Refer to the Core White Paper for additional information. SettingData instances can be aggregated together into higher- level SettingData objects using ConcreteComponent associations.
993Superclass SettingData for networking Superclass SettingData for networking
994Whether to turn on receive side scaling. One of the following values: - Disabled - Enabled Whether to turn on receive side scaling. One of the following values: - Disabled - Enabled
995Whether to turn on receive segment coalescing. One of the following values: - Disabled - Enabled Whether to turn on receive segment coalescing. One of the following values: - Disabled - Enabled
996Whether to turn on Chimney offload. One of the following values: - Disabled - Enabled - Automatic Whether to turn on Chimney offload. One of the following values: - Disabled - Enabled - Automatic
997Automatic Automatic
998Whether to turn on task offload. One of the following values: - Disabled - Enabled Whether to turn on task offload. One of the following values: - Disabled - Enabled
999Whether to turn on NetworkDirect. One of the following values: - Disabled - Enabled Whether to turn on NetworkDirect. One of the following values: - Disabled - Enabled
1000Whether to turn on packet coalescing filters. One of the following values: - Disabled - Enabled Whether to turn on packet coalescing filters. One of the following values: - Disabled - Enabled
1001Whether NetworkDirect connectivity outside of local IP subnet is allowed or not. One of the following values: - Blocked - Allowed Whether NetworkDirect connectivity outside of local IP subnet is allowed or not. One of the following values: - Blocked - Allowed
1002Blocked Blocked
1003Allowed Allowed
1004Represents the offload global setting class for Microsoft TCPIP WMIv2 provider. Represents the offload global setting class for Microsoft TCPIP WMIv2 provider.
1005Antecedent represents the independent object in this association. Antecedent represents the independent object in this association.
1006Dependent represents the object that is dependent on the Antecedent. Dependent represents the object that is dependent on the Antecedent.
1007CIM_Dependency is a generic association used to establish dependency relationships between ManagedElements. CIM_Dependency is a generic association used to establish dependency relationships between ManagedElements.
1008The endpoint used to reach the route\'s destination. The endpoint used to reach the route\'s destination.
1009The route using the endpoint. The route using the endpoint.
1010RouteUsesEndpoint depicts the relationship between a next hop route and the local Endpoint that is used to transmit the traffic to the \'next hop\'. RouteUsesEndpoint depicts the relationship between a next hop route and the local Endpoint that is used to transmit the traffic to the \'next hop\'.
1011The route associated with the interface The route associated with the interface
1012Represents the IPInterfaceRoute association class in TCPIP WMIv2 provider. Represents the IPInterfaceRoute association class in TCPIP WMIv2 provider.
1013The required ServiceAccessPoint. The required ServiceAccessPoint.
1014The ServiceAccessPoint that is dependent on an underlying SAP. The ServiceAccessPoint that is dependent on an underlying SAP.
1015CIM_SAPSAPDependency is an association between one ServiceAccessPoint and another ServiceAccessPoint that indicates that the latter is required for the former to utilize or connect with its Service. For example, to print to a network printer, local Print Access Points must utilize underlying network-related SAPs, or ProtocolEndpoints, to send the print request. CIM_SAPSAPDependency is an association between one ServiceAccessPoint and another ServiceAccessPoint that indicates that the latter is required for the former to utilize or connect with its Service. For example, to print to a network printer, local Print Access Points must utilize underlying network-related SAPs, or ProtocolEndpoints, to send the print request.
1016The lower-level endpoint that is accessed by the SAP. The lower-level endpoint that is accessed by the SAP.
1017The AccessPoint or ProtocolEndpoint that is dependent on the lower-level endpoint. The AccessPoint or ProtocolEndpoint that is dependent on the lower-level endpoint.
1018This association establishes a ServiceAccessPoint as a requestor of protocol services from a ProtocolEndpoint. Typically, this association runs between SAPs and endpoints on a single system. Because a ProtocolEndpoint is a kind of ServiceAccessPoint, this binding can be used to establish a layering of two protocols, with the upper layer represented by the Dependent and the lower layer represented by the Antecedent. This association establishes a ServiceAccessPoint as a requestor of protocol services from a ProtocolEndpoint. Typically, this association runs between SAPs and endpoints on a single system. Because a ProtocolEndpoint is a kind of ServiceAccessPoint, this binding can be used to establish a layering of two protocols, with the upper layer represented by the Dependent and the lower layer represented by the Antecedent.
1019The underlying LANEndpoint, which is depended upon. The underlying LANEndpoint, which is depended upon.
1020The AccessPoint or ProtocolEndpoint dependent on the LANEndpoint. The AccessPoint or ProtocolEndpoint dependent on the LANEndpoint.
1021This describes the framing method for the upper layer SAP or Endpoint that is bound to the LANEndpoint. Note: "Raw802.3" is only known to be used with the IPX protocol. This describes the framing method for the upper layer SAP or Endpoint that is bound to the LANEndpoint. Note: "Raw802.3" is only known to be used with the IPX protocol.
1022802.2 802.2
1023SNAP SNAP
1024Raw802.3 Raw802.3
1025This association makes explicit the dependency of a SAP or ProtocolEndpoint on an underlying LANEndpoint, on the same system. This association makes explicit the dependency of a SAP or ProtocolEndpoint on an underlying LANEndpoint, on the same system.
1026The IPInterface associated with the IP addresses. The IPInterface associated with the IP addresses.
1027The IP address associated with the IP interface The IP address associated with the IP interface
1028Represents the IPInterfaceIPAddress association class in TCPIP WMIv2 provider. Represents the IPInterfaceIPAddress association class in TCPIP WMIv2 provider.
1029The IPInterface used to reach the neighbor. The IPInterface used to reach the neighbor.
1030The neighbor associated with the IP interface The neighbor associated with the IP interface
1031Represents the IPInterfaceNeighbor association class in TCPIP WMIv2 provider. Represents the IPInterfaceNeighbor association class in TCPIP WMIv2 provider.
1032The scoping System\'s CreationClassName. The scoping System\'s CreationClassName.
1033The scoping System\'s Name. The scoping System\'s Name.
1034An address or other identifying information to uniquely name the LogicalDevice. An address or other identifying information to uniquely name the LogicalDevice.
1035Boolean indicating that the Device can be power managed. The use of this property has been deprecated. Instead, the existence of an associated PowerManagementCapabilities class (associated using the ElementCapabilities relationhip) indicates that power management is supported. Boolean indicating that the Device can be power managed. The use of this property has been deprecated. Instead, the existence of an associated PowerManagementCapabilities class (associated using the ElementCapabilities relationhip) indicates that power management is supported.
1036An enumerated array describing the power management capabilities of the Device. The use of this property has been deprecated. Instead, the PowerCapabilites property in an associated PowerManagementCapabilities class should be used. An enumerated array describing the power management capabilities of the Device. The use of this property has been deprecated. Instead, the PowerCapabilites property in an associated PowerManagementCapabilities class should be used.
1037Power Saving Modes Entered Automatically Power Saving Modes Entered Automatically
1038Power State Settable Power State Settable
1039Power Cycling Supported Power Cycling Supported
1040Timed Power On Supported Timed Power On Supported
1041The primary availability and status of the Device. (Additional status information can be specified using the Additional Availability array property.) For example, the Availability property indicates that the Device is running and has full power (value=3), or is in a warning (4), test (5), degraded (10) or power save state (values 13-15 and 17). Regarding the Power Save states, these are defined as follows: Value 13 ("Power Save - Unknown") indicates that the Device is known to be in a power save mode, but its exact status in this mode is unknown; 14 ("Power Save - Low Power Mode") indicates that the Device is in a power save state but still functioning, and may exhibit degraded performance; 15 ("Power Save - Standby") describes that the Device is not functioning but could be brought to full power \'quickly\'; and value 17 ("Power Save - Warning") indicates that the Device is in a warning state, though also in a power save mode. The primary availability and status of the Device. (Additional status information can be specified using the Additional Availability array property.) For example, the Availability property indicates that the Device is running and has full power (value=3), or is in a warning (4), test (5), degraded (10) or power save state (values 13-15 and 17). Regarding the Power Save states, these are defined as follows: Value 13 ("Power Save - Unknown") indicates that the Device is known to be in a power save mode, but its exact status in this mode is unknown; 14 ("Power Save - Low Power Mode") indicates that the Device is in a power save state but still functioning, and may exhibit degraded performance; 15 ("Power Save - Standby") describes that the Device is not functioning but could be brought to full power \'quickly\'; and value 17 ("Power Save - Warning") indicates that the Device is in a warning state, though also in a power save mode.
1042Running/Full Power Running/Full Power
1043Warning Warning
1044Power Off Power Off
1045Off Line Off Line
1046Off Duty Off Duty
1047Not Installed Not Installed
1048Install Error Install Error
1049Power Save - Unknown Power Save - Unknown
1050Power Save - Low Power Mode Power Save - Low Power Mode
1051Power Save - Standby Power Save - Standby
1052Power Cycle Power Cycle
1053Power Save - Warning Power Save - Warning
1054Paused Paused
1055Not Ready Not Ready
1056Not Configured Not Configured
1057Quiesced Quiesced
1058The StatusInfo property indicates whether the Logical Device is in an enabled (value = 3), disabled (value = 4) or some other (1) or unknown (2) state. If this property does not apply to the LogicalDevice, the value, 5 ("Not Applicable"), should be used. StatusInfo has been deprecated in lieu of a more clearly named property with additional enumerated values (EnabledState), that is inherited from ManagedSystemElement.
If a Device is ("Enabled")(value=3), it has been powered up, and is configured and operational. The Device may or may not be functionally active, depending on whether its Availability (or AdditionalAvailability) indicate that it is ("Running/Full Power")(value=3) or ("Off line") (value=8). In an enabled but offline mode, a Device may be performing out-of-band requests, such as running Diagnostics. If ("Disabled") StatusInfo value=4), a Device can only be "enabled" or powered off. In a personal computer environment, ("Disabled") means that the Device\'s driver is not available in the stack. In other environments, a Device can be disabled by removing its configuration file. A disabled device is physically present in a System and consuming resources, but can not be communicated with until a load of a driver, a load of a configuration file or some other "enabling" activity has occurred.
The StatusInfo property indicates whether the Logical Device is in an enabled (value = 3), disabled (value = 4) or some other (1) or unknown (2) state. If this property does not apply to the LogicalDevice, the value, 5 ("Not Applicable"), should be used. StatusInfo has been deprecated in lieu of a more clearly named property with additional enumerated values (EnabledState), that is inherited from ManagedSystemElement.
If a Device is ("Enabled")(value=3), it has been powered up, and is configured and operational. The Device may or may not be functionally active, depending on whether its Availability (or AdditionalAvailability) indicate that it is ("Running/Full Power")(value=3) or ("Off line") (value=8). In an enabled but offline mode, a Device may be performing out-of-band requests, such as running Diagnostics. If ("Disabled") StatusInfo value=4), a Device can only be "enabled" or powered off. In a personal computer environment, ("Disabled") means that the Device\'s driver is not available in the stack. In other environments, a Device can be disabled by removing its configuration file. A disabled device is physically present in a System and consuming resources, but can not be communicated with until a load of a driver, a load of a configuration file or some other "enabling" activity has occurred.
1059LastErrorCode captures the last error code reported by the LogicalDevice. LastErrorCode captures the last error code reported by the LogicalDevice.
1060ErrorDescription is a free-form string supplying more information about the error recorded in LastErrorCode, and information on any corrective actions that may be taken. ErrorDescription is a free-form string supplying more information about the error recorded in LastErrorCode, and information on any corrective actions that may be taken.
1061ErrorCleared is a boolean property indicating that the error reported in LastErrorCode is now cleared. ErrorCleared is a boolean property indicating that the error reported in LastErrorCode is now cleared.
1062OtherIdentifyingInfo captures additional data, beyond DeviceID information, that could be used to identify a LogicalDevice. One example would be to hold the Operating System\'s user friendly name for the Device in this property. OtherIdentifyingInfo captures additional data, beyond DeviceID information, that could be used to identify a LogicalDevice. One example would be to hold the Operating System\'s user friendly name for the Device in this property.
1063The number of consecutive hours that this Device has been powered, since its last power cycle. The number of consecutive hours that this Device has been powered, since its last power cycle.
1064Hours Hours
1065The total number of hours that this Device has been powered. The total number of hours that this Device has been powered.
1066An array of free-form strings providing explanations and details behind the entries in the OtherIdentifyingInfo array. Note, each entry of this array is related to the entry in OtherIdentifyingInfo that is located at the same index. An array of free-form strings providing explanations and details behind the entries in the OtherIdentifyingInfo array. Note, each entry of this array is related to the entry in OtherIdentifyingInfo that is located at the same index.
1067Additional availability and status of the Device, beyond that specified in the Availability property. The Availability property denotes the primary status and availability of the Device. In some cases, this will not be sufficient to denote the complete status of the Device. In those cases, the AdditionalAvailability property can be used to provide further information. For example, a Device\'s primary Availability may be "Off line" (value=8), but it may also be in a low power state (AdditonalAvailability value=14), or the Device could be running Diagnostics (AdditionalAvailability value=5, "In Test"). Additional availability and status of the Device, beyond that specified in the Availability property. The Availability property denotes the primary status and availability of the Device. In some cases, this will not be sufficient to denote the complete status of the Device. In those cases, the AdditionalAvailability property can be used to provide further information. For example, a Device\'s primary Availability may be "Off line" (value=8), but it may also be in a low power state (AdditonalAvailability value=14), or the Device could be running Diagnostics (AdditionalAvailability value=5, "In Test").
1068The MaxQuiesceTime property has been deprecated. When evaluating the use of Quiesce, it was determine that this single property is not adequate for describing when a device will automatically exit a quiescent state. In fact, the most likely scenario for a device to exit a quiescent state was determined to be based on the number of outstanding requests queued rather than on a maximum time. This will be re-evaluated and repositioned later.
Maximum time in milliseconds, that a Device can run in a "Quiesced" state. A Device\'s state is defined in its Availability and AdditionalAvailability properties, where "Quiesced" is conveyed by the value 21. What occurs at the end of the time limit is device-specific. The Device may unquiesce, may offline or take other action. A value of 0 indicates that a Device can remain quiesced indefinitely.
The MaxQuiesceTime property has been deprecated. When evaluating the use of Quiesce, it was determine that this single property is not adequate for describing when a device will automatically exit a quiescent state. In fact, the most likely scenario for a device to exit a quiescent state was determined to be based on the number of outstanding requests queued rather than on a maximum time. This will be re-evaluated and repositioned later.
Maximum time in milliseconds, that a Device can run in a "Quiesced" state. A Device\'s state is defined in its Availability and AdditionalAvailability properties, where "Quiesced" is conveyed by the value 21. What occurs at the end of the time limit is device-specific. The Device may unquiesce, may offline or take other action. A value of 0 indicates that a Device can remain quiesced indefinitely.
1069MilliSeconds MilliSeconds
1070Sets the power state of the Device. The use of this method has been deprecated. Instead, use the SetPowerState method in the associated PowerManagementService class. Sets the power state of the Device. The use of this method has been deprecated. Instead, use the SetPowerState method in the associated PowerManagementService class.
1071The power state to set. The power state to set.
1072Full Power Full Power
1073Power Save - Other Power Save - Other
1074Time indicates when the power state should be set, either as a regular date-time value or as an interval value (where the interval begins when the method invocation is received. Time indicates when the power state should be set, either as a regular date-time value or as an interval value (where the interval begins when the method invocation is received.
1075Requests a reset of the LogicalDevice. The return value should be 0 if the request was successfully executed, 1 if the request is not supported and some other value if an error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier. Requests a reset of the LogicalDevice. The return value should be 0 if the request was successfully executed, 1 if the request is not supported and some other value if an error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
1076The EnableDevice method has been deprecated in lieu of the more general RequestStateChange method that directly overlaps with the functionality provided by this method.
Requests that the LogicalDevice be enabled ("Enabled" input parameter = TRUE) or disabled (= FALSE). If successful, the Device\'s StatusInfo/EnabledState properties should reflect the desired state (enabled/disabled). Note that this method\'s function overlaps with the RequestedState property. RequestedState was added to the model to maintain a record (i.e., a persisted value) of the last state request. Invoking the EnableDevice method should set the RequestedState property appropriately.
The return code should be 0 if the request was successfully executed, 1 if the request is not supported and some other value if an error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
The EnableDevice method has been deprecated in lieu of the more general RequestStateChange method that directly overlaps with the functionality provided by this method.
Requests that the LogicalDevice be enabled ("Enabled" input parameter = TRUE) or disabled (= FALSE). If successful, the Device\'s StatusInfo/EnabledState properties should reflect the desired state (enabled/disabled). Note that this method\'s function overlaps with the RequestedState property. RequestedState was added to the model to maintain a record (i.e., a persisted value) of the last state request. Invoking the EnableDevice method should set the RequestedState property appropriately.
The return code should be 0 if the request was successfully executed, 1 if the request is not supported and some other value if an error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
1077If TRUE enable the device, if FALSE disable the device. If TRUE enable the device, if FALSE disable the device.
1078The OnlineDevice method has been deprecated in lieu of the more general RequestStateChange method that directly overlaps with the functionality provided by this method.
Requests that the LogicalDevice be brought online ("Online" input parameter = TRUE) or taken offline (= FALSE). "Online" indicates that the Device is ready to accept requests, and is operational and fully functioning. In this case, the Device\'s Availability property would be set to a value of 3 ("Running/Full Power"). "Offline" indicates that a Device is powered up and operational, but not processing functional requests. In an offline state, a Device may be capable of running diagnostics or generating operational alerts. For example, when the "Offline" button is pushed on a Printer, the Device is no longer available to process print jobs, but could be available for diagnostics or maintenance.
If this method is successful, the Device\'s Availability and AdditionalAvailability properties should reflect the updated status. If a failure occurs trying to bring the Device online or offline, it should remain in its current state. IE, the request, if unsuccessful, should not leave the Device in an indeterminate state. When bringing a Device back "Online", from an "Offline" mode, the Device should be restored to its last "Online" state, if at all possible. Only a Device that has an EnabledState/StatusInfo of "Enabled" and has been configured can be brought online or taken offline.
OnlineDevice should return 0 if successful, 1 if the request is not supported at all, 2 if the request is not supported due to the current state of the Device, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
Note that this method\'s function overlaps with the RequestedState property. RequestedState was added to the model to maintain a record (i.e., a persisted value) of the last state request. Invoking the OnlineDevice method should set the RequestedState property appropriately.
The OnlineDevice method has been deprecated in lieu of the more general RequestStateChange method that directly overlaps with the functionality provided by this method.
Requests that the LogicalDevice be brought online ("Online" input parameter = TRUE) or taken offline (= FALSE). "Online" indicates that the Device is ready to accept requests, and is operational and fully functioning. In this case, the Device\'s Availability property would be set to a value of 3 ("Running/Full Power"). "Offline" indicates that a Device is powered up and operational, but not processing functional requests. In an offline state, a Device may be capable of running diagnostics or generating operational alerts. For example, when the "Offline" button is pushed on a Printer, the Device is no longer available to process print jobs, but could be available for diagnostics or maintenance.
If this method is successful, the Device\'s Availability and AdditionalAvailability properties should reflect the updated status. If a failure occurs trying to bring the Device online or offline, it should remain in its current state. IE, the request, if unsuccessful, should not leave the Device in an indeterminate state. When bringing a Device back "Online", from an "Offline" mode, the Device should be restored to its last "Online" state, if at all possible. Only a Device that has an EnabledState/StatusInfo of "Enabled" and has been configured can be brought online or taken offline.
OnlineDevice should return 0 if successful, 1 if the request is not supported at all, 2 if the request is not supported due to the current state of the Device, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
Note that this method\'s function overlaps with the RequestedState property. RequestedState was added to the model to maintain a record (i.e., a persisted value) of the last state request. Invoking the OnlineDevice method should set the RequestedState property appropriately.
1079If TRUE, take the device online, if FALSE, take the device OFFLINE. If TRUE, take the device online, if FALSE, take the device OFFLINE.
1080The QuiesceDevice method has been deprecated in lieu of the more general RequestStateChange method that directly overlaps with the functionality provided by this method.
Requests that the LogicalDevice cleanly cease all current activity ("Quiesce" input parameter = TRUE) or resume activity (= FALSE). For this method to quiesce a Device, that Device should have an Availability (or Additional Availability) of "Running/Full Power" (value=3) and an EnabledStatus/StatusInfo of "Enabled". For example, if quiesced, a Device may then be offlined for diagnostics, or disabled for power off and hot swap. For the method to "unquiesce" a Device, that Device should have an Availability (or AdditionalAvailability) of "Quiesced" (value=21) and an EnabledStatus/StatusInfo of "Enabled". In this case, the Device would be returned to an "Enabled" and "Running/Full Power" status.
The method\'s return code should indicate the success or failure of the quiesce. It should return 0 if successful, 1 if the request is not supported at all, 2 if the request is not supported due to the current state of the Device, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
The QuiesceDevice method has been deprecated in lieu of the more general RequestStateChange method that directly overlaps with the functionality provided by this method.
Requests that the LogicalDevice cleanly cease all current activity ("Quiesce" input parameter = TRUE) or resume activity (= FALSE). For this method to quiesce a Device, that Device should have an Availability (or Additional Availability) of "Running/Full Power" (value=3) and an EnabledStatus/StatusInfo of "Enabled". For example, if quiesced, a Device may then be offlined for diagnostics, or disabled for power off and hot swap. For the method to "unquiesce" a Device, that Device should have an Availability (or AdditionalAvailability) of "Quiesced" (value=21) and an EnabledStatus/StatusInfo of "Enabled". In this case, the Device would be returned to an "Enabled" and "Running/Full Power" status.
The method\'s return code should indicate the success or failure of the quiesce. It should return 0 if successful, 1 if the request is not supported at all, 2 if the request is not supported due to the current state of the Device, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
1081If set to TRUE then cleanly cease all activity, if FALSE resume activity. If set to TRUE then cleanly cease all activity, if FALSE resume activity.
1082Requests that the Device capture its current configuration, setup and/or state information in a backing store. The goal would be to use this information at a later time (via the RestoreProperties method), to return a Device to its present "condition". This method may not be supported by all Devices. The method should return 0 if successful, 1 if the request is not supported, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier. Requests that the Device capture its current configuration, setup and/or state information in a backing store. The goal would be to use this information at a later time (via the RestoreProperties method), to return a Device to its present "condition". This method may not be supported by all Devices. The method should return 0 if successful, 1 if the request is not supported, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
1083Requests that the Device re-establish its configuration, setup and/or state information from a backing store. The intent is to capture this information at an earlier time (via the SaveProperties method), and use it to return a Device to this earlier "condition". This method may not be supported by all Devices. The method should return 0 if successful, 1 if the request is not supported, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier. Requests that the Device re-establish its configuration, setup and/or state information from a backing store. The intent is to capture this information at an earlier time (via the SaveProperties method), and use it to return a Device to this earlier "condition". This method may not be supported by all Devices. The method should return 0 if successful, 1 if the request is not supported, and some other value if any other error occurred. In a subclass, the set of possible return codes could be specified, using a ValueMap qualifier on the method. The strings to which the ValueMap contents are \'translated\' may also be specified in the subclass as a Values array qualifier.
1084An abstraction or emulation of a hardware entity, that may or may not be Realized in physical hardware. Any characteristics of a LogicalDevice that are used to manage its operation or configuration are contained in, or associated with, the LogicalDevice object. Examples of the operational properties of a Printer would be paper sizes supported, or detected errors. Examples of the configuration properties of a Sensor Device would be threshold settings. Various configurations could exist for a LogicalDevice. These configurations could be contained in Setting objects and associated with the LogicalDevice. An abstraction or emulation of a hardware entity, that may or may not be Realized in physical hardware. Any characteristics of a LogicalDevice that are used to manage its operation or configuration are contained in, or associated with, the LogicalDevice object. Examples of the operational properties of a Printer would be paper sizes supported, or detected errors. Examples of the configuration properties of a Sensor Device would be threshold settings. Various configurations could exist for a LogicalDevice. These configurations could be contained in Setting objects and associated with the LogicalDevice.
1085The LogicalDevice. The LogicalDevice.
1086The ServiceAccessPoint implemented using the LogicalDevice. The ServiceAccessPoint implemented using the LogicalDevice.
1087An association between a ServiceAccessPoint (SAP) and how it is implemented. The cardinality of this association is many-to-many. A SAP can be provided by more than one LogicalDevice, operating in conjunction. And, any Device can provide more than one ServiceAccessPoint. When many LogicalDevices are associated with a single SAP, it is assumed that these elements operate in conjunction to provide the AccessPoint. If different implementations of a SAP exist, each of these implementations would result in individual instantiations of the ServiceAccessPoint object. These individual instantiations would then have associations to the unique implementations. An association between a ServiceAccessPoint (SAP) and how it is implemented. The cardinality of this association is many-to-many. A SAP can be provided by more than one LogicalDevice, operating in conjunction. And, any Device can provide more than one ServiceAccessPoint. When many LogicalDevices are associated with a single SAP, it is assumed that these elements operate in conjunction to provide the AccessPoint. If different implementations of a SAP exist, each of these implementations would result in individual instantiations of the ServiceAccessPoint object. These individual instantiations would then have associations to the unique implementations.
1088The bandwidth of the Port in Bits per Second. The bandwidth of the Port in Bits per Second.
1089Bits per Second Bits per Second
1090The maximum bandwidth of the Port in Bits per Second. The maximum bandwidth of the Port in Bits per Second.
1091The requested bandwidth of the Port in Bits per Second. The actual bandwidth is reported in LogicalPort.Speed. The requested bandwidth of the Port in Bits per Second. The actual bandwidth is reported in LogicalPort.Speed.
1092In some circumstances, a LogicalPort might be identifiable as a front end or back end port. An example of this situation would be a storage array that might have back end ports to communicate with disk drives and front end ports to communicate with hosts. If there is no restriction on the use of the port, then the value should be set to \'not restricted\'. In some circumstances, a LogicalPort might be identifiable as a front end or back end port. An example of this situation would be a storage array that might have back end ports to communicate with disk drives and front end ports to communicate with hosts. If there is no restriction on the use of the port, then the value should be set to \'not restricted\'.
1093Front-end only Front-end only
1094Back-end only Back-end only
1095Not restricted Not restricted
1096PortType is defined to force consistent naming of the \'type\' property in subclasses and to guarantee unique enum values for all instances of NetworkPort. When set to 1 ("Other"), related property OtherPortType contains a string description of the type of port. A range of values, DMTF_Reserved, has been defined that allows subclasses to override and define their specific types of ports. PortType is defined to force consistent naming of the \'type\' property in subclasses and to guarantee unique enum values for all instances of NetworkPort. When set to 1 ("Other"), related property OtherPortType contains a string description of the type of port. A range of values, DMTF_Reserved, has been defined that allows subclasses to override and define their specific types of ports.
1097Describes the type of module, when PortType is set to 1 ("Other"). Describes the type of module, when PortType is set to 1 ("Other").
1098The abstraction of a port or connection point of a Device. This object should be instantiated when the Port has independent management characteristics from the Device that includes it. Examples are a Fibre Channel Port and a USB Port. The abstraction of a port or connection point of a Device. This object should be instantiated when the Port has independent management characteristics from the Device that includes it. Examples are a Fibre Channel Port and a USB Port.
1099The LogicalPort that represents the Device behind the ProtocolEndpoint. The LogicalPort that represents the Device behind the ProtocolEndpoint.
1100The ProtocolEndpoint that is implemented on the LogicalPort. The ProtocolEndpoint that is implemented on the LogicalPort.
1101PortImplementsEndpoint associates a LogicalPort with one or more ProtocolEndpoints that are implemented on it. This class specializes the DeviceSAPImplementation association. It indicates that the referenced Endpoint is dependent on the operations of the Port Device. PortImplementsEndpoint associates a LogicalPort with one or more ProtocolEndpoints that are implemented on it. This class specializes the DeviceSAPImplementation association. It indicates that the referenced Endpoint is dependent on the operations of the Port Device.
1102The current bandwidth of the Port in Bits per Second. For ports that vary in bandwidth or for those where no accurate estimation can be made, this property should contain the nominal bandwidth. The current bandwidth of the Port in Bits per Second. For ports that vary in bandwidth or for those where no accurate estimation can be made, this property should contain the nominal bandwidth.
1103Note: The use of this property is deprecated in lieu of CIM_LogicalPort.PortType.
Deprecated description: The type of module, when PortType is set to 1 ("Other".)
Note: The use of this property is deprecated in lieu of CIM_LogicalPort.PortType.
Deprecated description: The type of module, when PortType is set to 1 ("Other".)
1104NetworkPorts are often numbered relative to either a logical module or a network element. NetworkPorts are often numbered relative to either a logical module or a network element.
1105An enumeration of the types of links. When set to 1 ("Other"), the related property OtherLinkTechnology contains a string description of the type of link. An enumeration of the types of links. When set to 1 ("Other"), the related property OtherLinkTechnology contains a string description of the type of link.
1106IB IB
1107FC FC
1108Token Ring Token Ring
1109Infrared Infrared
1110BlueTooth BlueTooth
1111Wireless LAN Wireless LAN
1112A string value that describes LinkTechnology when it is set to 1, "Other". A string value that describes LinkTechnology when it is set to 1, "Other".
1113PermanentAddress defines the network address that is hardcoded into a port. This \'hardcoded\' address can be changed using a firmware upgrade or a software configuration. When this change is made, the field should be updated at the same time. PermanentAddress should be left blank if no \'hardcoded\' address exists for the NetworkAdapter. PermanentAddress defines the network address that is hardcoded into a port. This \'hardcoded\' address can be changed using a firmware upgrade or a software configuration. When this change is made, the field should be updated at the same time. PermanentAddress should be left blank if no \'hardcoded\' address exists for the NetworkAdapter.
1114An array of strings that indicates the network addresses for the port. An array of strings that indicates the network addresses for the port.
1115Boolean that indicates that the port is operating in full duplex mode. Boolean that indicates that the port is operating in full duplex mode.
1116A Boolean that indicates whether the NetworkPort is capable of automatically determining the speed or other communications characteristics of the attached network media. A Boolean that indicates whether the NetworkPort is capable of automatically determining the speed or other communications characteristics of the attached network media.
1117The maximum transmission unit (MTU) that can be supported. The maximum transmission unit (MTU) that can be supported.
1118Bytes Bytes
1119The active or negotiated maximum transmission unit (MTU) that can be supported. The active or negotiated maximum transmission unit (MTU) that can be supported.
1120NetworkPort is the logical representation of network communications hardware such as a physical connector and the setup or operation of the network chips, at the lowest layers of a network stack. NetworkPort is the logical representation of network communications hardware such as a physical connector and the setup or operation of the network chips, at the lowest layers of a network stack.
1121The IPInterface associated with the NetworkPort. The IPInterface associated with the NetworkPort.
1122The NetworkPort associated with the IPInterface The NetworkPort associated with the IPInterface
1123Represents the IPInterfaceAdapter association class in TCPIP WMIv2 provider. Represents the IPInterfaceAdapter association class in TCPIP WMIv2 provider.
1124The filter associated with the TCP setting. The filter associated with the TCP setting.
1125The TCP setting associated with the filter The TCP setting associated with the filter
1126Represents the TransportFilterTCPSetting association class in TCPIP WMIv2 provider. Represents the TransportFilterTCPSetting association class in TCPIP WMIv2 provider.
1127Compartment identifier. Compartment identifier.
1128Compartment globally unique identifier. Compartment globally unique identifier.
1129User-friendly compartment description. User-friendly compartment description.
1130Compartment type. Compartment type.
1131Unspecified Unspecified
1132Native Native
1133RoutingDomain RoutingDomain
1134Represents the Compartment for Microsoft TCPIP WMIv2 provider. Represents the Compartment for Microsoft TCPIP WMIv2 provider.
0x1Can not find the required property %1 Can not find the required property %1
0x2Not all required properties are specified: %1 and either one of %2 %3 Not all required properties are specified: %1 and either one of %2 %3
0x3Not all required properties are specified: either one of %1 %2 and either one of %3 %4 Not all required properties are specified: either one of %1 %2 and either one of %3 %4
0x4Not all required properties are specified: %1 %2 and either one of %3 %4 Not all required properties are specified: %1 %2 and either one of %3 %4
0x5Not all required properties are specified: %1 and either %2 %3 %4 %5 or %6 %7 Not all required properties are specified: %1 and either %2 %3 %4 %5 or %6 %7
0x6Only the custom templates InternetCustom and DatacenterCustom can be modified. Only the custom templates InternetCustom and DatacenterCustom can be modified.
0x7%1 must be the same as %2, %3 must be the same as %4 or only one of the ranges must be wildcard (0, 65535) %1 must be the same as %2, %3 must be the same as %4 or only one of the ranges must be wildcard (0, 65535)
0x8Properties that need modification should not include any of the following %1 %2 %3 %4 %5 %6 Properties that need modification should not include any of the following %1 %2 %3 %4 %5 %6
0x9Properties that need modification should not include any of the following %1 %2 %3 %4 %5 %6 %7 %8 %9 %10 Properties that need modification should not include any of the following %1 %2 %3 %4 %5 %6 %7 %8 %9 %10
0xAProperties that need modification should not include any of the following %1 %2 %3 %4 %5 %6 %7 %8 %9 %10 %11 %12 Properties that need modification should not include any of the following %1 %2 %3 %4 %5 %6 %7 %8 %9 %10 %11 %12
0xBInstance %1 %2 not found Instance %1 %2 not found
0xCInstance %1 already exists Instance %1 already exists
0xDInvalid parameter %1 %2, %3 should not be specified Invalid parameter %1 %2, %3 should not be specified
0xEInvalid parameter %1 Days: %2!lu! Hours: %3!lu! Minutes: %4!lu! Seconds: %5!lu! Microseconds: %6!lu! Invalid parameter %1 Days: %2!lu! Hours: %3!lu! Minutes: %4!lu! Seconds: %5!lu! Microseconds: %6!lu!
0xFInvalid parameter %1 Invalid parameter %1
0x10Invalid parameter %1 %2 Invalid parameter %1 %2
0x11Invalid parameter %1 %2 %3 %4 Invalid parameter %1 %2 %3 %4
0x12Invalid parameter %1 %2!lu! Invalid parameter %1 %2!lu!
0x13Inconsistent parameters %1 %2 and %3 %4 Inconsistent parameters %1 %2 and %3 %4
0x14Value of property %1 should be at most the value of property %2 Value of property %1 should be at most the value of property %2
0x15Value of property %1 should be at most %2!lu! Value of property %1 should be at most %2!lu!
0x16Property %1 is read-only Property %1 is read-only
0x17This feature is available on servers only. This feature is available on servers only.
0x18Properties %1 and %2 should have values at the same time Properties %1 and %2 should have values at the same time
0x19Properties %1 and %2 should not have values at the same time Properties %1 and %2 should not have values at the same time
0x1AWhen property %1 is %2!lu!, %3 and %4 can not be set When property %1 is %2!lu!, %3 and %4 can not be set
0x1BProperties %1 %2 %3 %4 and %5 %6 should not have values at the same time Properties %1 %2 %3 %4 and %5 %6 should not have values at the same time
0x1CCan only modify/create/delete Neighbor object whose State is Permanent Can only modify/create/delete Neighbor object whose State is Permanent
0x1DDefault loopback address cannot be deleted Default loopback address cannot be deleted
0x1EDefault loopback route cannot be deleted Default loopback route cannot be deleted
0x1FIPv4 protocol is not installed. IPv4 protocol is not installed.
0x20This feature is not available on servers. This feature is not available on servers.
0x21DefaultGateway %1 is not on the same network segment (subnet) that is defined by the IP address %2 and PrefixLength %3!lu!. DefaultGateway %1 is not on the same network segment (subnet) that is defined by the IP address %2 and PrefixLength %3!lu!.
0x22Interface %1 does not support setting LinkLayerAddress. Interface %1 does not support setting LinkLayerAddress.
0x23The parameter %1 must be specified. The parameter %1 must be specified.
0x24Both IP addresses must be from the same address family. Both IP addresses must be from the same address family.

EXIF

File Name:NetTCPIP.dll.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-t..2provider.resources_31bf3856ad364e35_10.0.15063.0_fi-fi_4ab855283b9793ef\
File Size:220 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:225280
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Dynamic link library
File Subtype:0
Language Code:Finnish
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:TCPIP WMI Provider
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:NetTCPIP.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:NetTCPIP.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0

What is NetTCPIP.dll.mui?

NetTCPIP.dll.mui is Multilingual User Interface resource file that contain Finnish language for file NetTCPIP.dll (TCPIP WMI Provider).

File version info

File Description:TCPIP WMI Provider
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:NetTCPIP.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:NetTCPIP.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x40B, 1200