| 0x00040001 | 在 %1 上重试成功。 |
A retry was successful on %1. |
| 0x40040024 | 一个用户已达到卷 %2 上的配额阈值。 |
A user hit their quota threshold on volume %2. |
| 0x40040025 | 一个用户已达到卷 %2 上的配额限量。 |
A user hit their quota limit on volume %2. |
| 0x40040026 | 系统已开始重建带有标签“%2”的设备 %1 上的用户 磁盘限额信息。 |
The system has started rebuilding the user disk quota information ondevice %1 with label \"%2\". |
| 0x40040027 | 系统已成功地重建带有标签“%2”的设备 %1 上的用户 磁盘限额信息。 |
The system has successfully rebuilt the user disk quota information ondevice %1 with label \"%2\". |
| 0x40040077 | 为了处理内存不足，设备 %1 的驱动程序延迟了非分页 Io 请求 %2 毫秒。 |
The driver for device %1 delayed non-paging Io requests for %2 ms to recover from a low memory condition. |
| 0x40040085 | 设备 %1 被锁定，无法以独占模式进行访问。 |
Device %1 is locked for exclusive access. |
| 0x4004009F | 磁盘 %2 的固件更新已完成。 |
Firmware update for Disk %2 is completed. |
| 0x400400A0 | 适配器 %1 的固件更新已完成。 |
Firmware update for Adapter %1 is completed. |
| 0x40050070 | 汇报的机器检查事件是从 CPU %1 汇报的 CPU 热节流事件。CPU 温度已掉到限制之下，节流已被删除。记录中还包括其他 %2 个错误。 |
Machine Check Event reported is a CPU thermal throttling event reported from CPU %1. The CPU has dropped below the temperature limit and throttling has been removed. %2 additional error(s) are contained within the record. |
| 0x40050073 | 已达到可以存入事件日志的机器检查事件已更正错误事件的最大数量。这个事件的记录已被禁用。 |
The maximum number of Machine Check Event corrected error events that can be saved to the Event Log has been reached. Logging of these events has been disabled. |
| 0x40050074 | 物理地址 %1 的内存页面遇到多个已更正硬件错误事件。结果是，Windows 不再使用这个页面。 |
The memory page at physical address %1 has encountered multiple corrected hardware error events. As a result it will no longer be used by Windows. |
| 0x8004001A | 驱动程序检测到设备 %1 的固件过旧或时效已过。可能会使性能降低。 |
The driver has detected that device %1 has old or out-of-date firmware.Reduced performance may result. |
| 0x80040020 | 驱动程序检测到设备 %1 已经启用写入高速缓存，可能会出现数据损坏。 |
The driver detected that the device %1 has its write cache enabled. Data corruptionmay occur. |
| 0x80040021 | 已经用设备 %1 的纠错码还原数据。 |
Data was recovered using error correction code on device %1. |
| 0x80040022 | 驱动程序已经禁用设备 %1 上的写入高速缓存。 |
The driver disabled the write cache on device %1. |
| 0x80040028 | 系统在重建标签为“%2”的设备 %1 上的用户 磁盘限额信息时出错。 |
The system has encounted an error rebuilding the user disk quotainformation on device %1 with label \"%2\". |
| 0x80040032 | {延迟写入失败}Windows 无法保存文件 %2 的所有数据。数据可能已丢失。这个错误可能是由计算机硬件或网络连接故障引起的。请将这个文件保存其他地方。 |
{Delayed Write Failed}Windows was unable to save all the data for the file %2. The data has been lost.This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. |
| 0x80040033 | 传呼期间在设备 %1 上检测到一个错误。 |
An error was detected on device %1 during a paging operation. |
| 0x80040034 | 驱动程序检测到设备 %1 会出故障。请立即备份你的数据，替换硬盘驱动器。故障可能会很快发生。 |
The driver has detected that device %1 has predicted that it will fail.Immediately back up your data and replace your hard disk drive. A failuremay be imminent. |
| 0x80040035 | 在超时操作期间，在设备 %1 上检测到一个挂起的中断。这些警告大多数表示系统没有正确接收或处理来自设备的中断。 |
A pending interrupt was detected on device %1 during a timeout operation. Alarge number of these warnings may indicate that the system is not correctlyreceiving or processing interrupts from the device. |
| 0x80040036 | 在指定的超时期间，对设备 %1 的 IO 请求没有完成或被取消。如果设备驱动程序没有为指定的 IO请求数据包设定取消例程，这可能发生。 |
An Io Request to the device %1 did not complete or canceled within thespecific timeout. This can occur if the device driver does not set acancel routine for a given IO request packet. |
| 0x80040038 | 驱动程序未能分配内存。 |
The driver failed to allocate memory. |
| 0x80040039 | 系统未能将数据转储到事务日志。可能出现损坏现象。 |
The system failed to flush data to the transaction log. Corruption may occur. |
| 0x8004003A | 磁盘 %2 的磁盘签名等于磁盘 %3 的磁盘签名。 |
The disk signature of disk %2 is equal to the disk signature of disk %3. |
| 0x8004003B | 由于是磁盘 %3 的重复路径，磁盘 %2 不会被使用。 |
Disk %2 will not be used because it is a redundant path for disk %3. |
| 0x80040076 | 设备 %1 的驱动程序在接到请求时执行了总线重置。 |
The driver for device %1 performed a bus reset upon request. |
| 0x80040081 | 发出了对设备 %1 的重置。 |
Reset to device, %1, was issued. |
| 0x80040084 | 设备 %1 没有正确处理某些写入请求。请确保在设备管理器中为此设备禁用了“写入缓存”选项，否则可能会出现数据损坏。 |
Device %1 is not correctly processing some write requests. In Device Manager, ensure that the Write Cache option is disabled for this device or data corruption may occur. |
| 0x8004008B | {延迟写入失败}Windows 无法保存文件 %2 的所有数据；数据已丢失。此错误可能是由于网络连接问题所致。请尝试将此文件保存到其他位置。 |
{Delayed Write Failed}Windows was unable to save all the data for the file %2; the data has been lost.This error may be caused by network connectivity issues. Please try to save this file elsewhere. |
| 0x8004008C | {延迟写入失败}Windows 无法保存文件 %2 的所有数据；数据已丢失。此错误是由此文件所在的服务器返回的。请尝试将此文件保存到其他位置。 |
{Delayed Write Failed}Windows was unable to save all the data for the file %2; the data has been lost.This error was returned by the server on which the file exists. Please try to save this file elsewhere. |
| 0x8004008D | {延迟写入失败}Windows 无法保存文件 %2 的所有数据；数据已丢失。如果设备已被移除或介质为写保护状态，则可能导致此错误。 |
{Delayed Write Failed}Windows was unable to save all the data for the file %2; the data has been lost.This error may be caused if the device has been removed or the media is write-protected. |
| 0x8004008E | 作为容错卷 %2 一部分的磁盘 %3 上的扩展 %4 不再可访问。 |
Extent %4 on disk %3 that is part of the fault-tolerant volume %2 is no longer accessible. |
| 0x8004008F | 存储设备生成一个内部转储。 |
The storage device produced an internal dump. |
| 0x80040090 | 磁盘 %2 已超过容量利用率阈值。 |
Disk %2 has crossed a capacity utilization threshold. |
| 0x80040091 | 磁盘 %2 已超过容量利用率阈值，已使用 %3 字节。超过阈值时，剩余容量为 %4 字节。 |
Disk %2 has crossed a capacity utilization threshold and used %3 bytes. When the threshold was crossed, there were %4 bytes of remaining capacity. |
| 0x80040092 | 磁盘 %2 已超过容量利用率阈值，已使用 %3 字节。超过阈值时，磁盘剩余容量为 %4 字节。 |
Disk %2 has crossed a capacity utilization threshold and used %3 bytes. When the threshold was crossed, the disk had %4 bytes of remaining capacity. |
| 0x80040093 | 磁盘 %2 已超过容量利用率阈值，已使用 %3 字节。超过阈值时，池剩余容量为 %4 字节。 |
Disk %2 has crossed a capacity utilization threshold and used %3 bytes. When the threshold was crossed, the pool had %4 bytes of remaining capacity. |
| 0x80040094 | 磁盘 %2 已超过容量利用率阈值。超过阈值时，池中已使用 %3 字节，磁盘剩余容量为 %4 字节。 |
Disk %2 has crossed a capacity utilization threshold. When the threshold was crossed, %3 bytes from the pool were used and the disk had %4 bytes of remaining capacity. |
| 0x80040095 | 磁盘 %2 已超过容量利用率阈值。超过阈值时，池中已使用 %3 字节，池剩余容量为 %4 字节。 |
Disk %2 has crossed a capacity utilization threshold. When the threshold was crossed, %3 bytes from the pool were used and the pool had %4 bytes of remaining capacity. |
| 0x80040097 | 磁盘 %2 的容量已更改。 |
The capacity of Disk %2 has changed. |
| 0x80040098 | 磁盘 %2 的逻辑块预配类型已更改。 |
The logical block provisioning type for Disk %2 has changed. |
| 0x80040099 | 已在磁盘 %3 (PDO 名称: %4)的逻辑块地址 %2 处重试 IO 操作。 |
The IO operation at logical block address %2 for Disk %3 (PDO name: %4) was retried. |
| 0x8004009B | 在磁盘 %3 上的逻辑块地址 %2 的 IO 操作用时 %4 毫秒。这已超出 %5 毫秒的最大预期时间。 |
The IO operation at logical block address %2 for Disk %3 took %4 milliseconds. This was longer than the maximum expected time of %5 milliseconds. |
| 0x8004009C | 已禁用故障转储。系统中不存在故障转储设备。 |
Crash dump is disabled. Crash dump device is not present in the system. |
| 0x8004009D | 磁盘 %2 已被意外移除。 |
Disk %2 has been surprise removed. |
| 0x8004009E | 磁盘 %2 的磁盘标识符与连接到系统的一个或多个磁盘的磁盘标识符相同。请转到 Microsoft 的支持网站(http://support.microsoft.com)，并搜索 KB2983588 以解决此问题。 |
Disk %2 has the same disk identifiers as one or more disks connected to the system. Go to Microsoft's support website (http://support.microsoft.com) and search for KB2983588 to resolve the issue. |
| 0x8005003C | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的级别 %3 缓存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected level %3 Cache error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005003E | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的级别 %3 转换缓冲区错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected level %3 translation Buffer error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050040 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的外部/内部总线错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected External/Internal bus error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050042 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的内部 CPU 寄存器访问错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected internal CPU register access error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050044 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的微体系结构错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected Micro Architecture Structure error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050046 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的未知物理位置的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected ECC memory error at an unknown physical address reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050048 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的物理位置 %3 的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected ECC memory error at physical address %3 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005004A | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的内存模块 %4 上的物理位置 %3 的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected ECC memory error at physical address %3 on memory module %4 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005004C | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的内存卡 %5 上内存模块 %4 上的物理位置 %3 的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected ECC memory error at physical address %3 on memory module %4 on memory card %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005004E | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的系统事件错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected System Event error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050050 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 PCI 总线奇偶校验错误(在 PCI 总线 %5、地址 %4 的事务类型 %3 期间发生)。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus Parity error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050052 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 PCI 总线奇偶校验错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus Parity error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050054 | 汇报的机器检查事件是一个汇报给 CPU %1 的 PCI 总线 %5 上地址 %4 的事务类型 %3 期间发生的已更正的 PCI 总线 SERR 错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus SERR error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050056 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 PCI 总线 SERR 错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus SERR error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050058 | 汇报的机器检查事件是一个汇报给 CPU %1 的 PCI 总线 %5 上地址 %4 的事务类型 %3 期间发生的已更正的 PCI 总线主机中止错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus Master abort error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005005A | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 PCI 总线主机中止错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus Master abort error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005005C | 汇报的机器检查事件是一个汇报给 CPU %1 的 PCI 总线 %5 上地址 %4 的事务类型 %3 期间发生的已更正的 PCI 总线超时错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus Timeout error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x8005005E | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 PCI 总线超时错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI bus Timeout error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050060 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的未知 PCI 总线超时错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is an unknown corrected PCI bus error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050062 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 PCI 组件错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected PCI component error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050064 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的 SMBIOS 设备类型 %3 错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected SMBIOS Device Type %3 error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050066 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的平台特定错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a corrected Platform Specific error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0x80050068 | 汇报的机器检查事件是一个汇报给 CPU %1 的已更正的错误。 |
Machine Check Event reported is a corrected error reported to CPU %1. |
| 0x8005006A | 汇报的机器检查事件是一个已更正的错误。 |
Machine Check Event reported is a corrected error. |
| 0x8005006D | Corrected Machine Check Interrupt 阈值已超过。中断已被禁用。轮询模式已被启用。 |
Corrected Machine Check Interrupt threshold exceeded. Interrupt has been disabled. Polling mode has been enabled. |
| 0x8005006E | Corrected Platform Error Interrupt 阈值已超过。中断已被禁用。轮询模式已被启用。 |
Corrected Platform Error Interrupt threshold exceeded. Interrupt has been disabled. Polling mode has been enabled. |
| 0x8005006F | 汇报的机器检查事件是从 CPU %1 汇报的 CPU 热节流事件。CPU 已超过温度限制并已被调下来。记录中还包括其他 %2 个错误。 |
Machine Check Event reported is a CPU thermal throttling event reported from CPU %1. The CPU has exceeded the temperature limit and has been throttled down. %2 additional error(s) are contained within the record. |
| 0x80050071 | 汇报的机器检查事件是从 CPU %1 汇报的经过更正的 CPU 错误。记录中还包括其他 %2 个错误。 |
Machine Check Event reported is a corrected CPU error reported from CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0040002 | 驱动程序无法为 %1 的请求分配所需的资源。 |
The driver could not allocate something necessary for the request for %1. |
| 0xC0040003 | %1 的驱动程序或设备配置错误。 |
Driver or device is incorrectly configured for %1. |
| 0xC0040004 | 驱动程序为 %1 在其数据结构中检测到了一个内部错误。 |
Driver detected an internal error in its data structures for %1. |
| 0xC0040005 | 在 %1 上检测到奇偶校验错误。 |
A parity error was detected on %1. |
| 0xC0040006 | 设备 %1 有查找错误。 |
The device, %1, had a seek error. |
| 0xC0040007 | 设备 %1 有一个不正确的区块。 |
The device, %1, has a bad block. |
| 0xC0040008 | %1 上出现超限现象。 |
An overrun occurred on %1. |
| 0xC0040009 | 设备 %1 没有在传输等待时间内响应。 |
The device, %1, did not respond within the timeout period. |
| 0xC004000A | 驱动程序通过设备 %1 检测到意外的顺序。 |
The driver detected an unexpected sequence by the device, %1. |
| 0xC004000B | 驱动程序在 %1 上检测到控制器错误。 |
The driver detected a controller error on %1. |
| 0xC004000C | 驱动程序在 %1 上检测到内部驱动程序错误。 |
The driver detected an internal driver error on %1. |
| 0xC004000D | 驱动程序配置中，%1 的中断不正确。 |
The driver was configured with an incorrect interrupt for %1. |
| 0xC004000E | 驱动程序配置中，%1 的 I/O 基址无效。 |
The driver was configured with an invalid I/O base address for %1. |
| 0xC004000F | 设备 %1 的访问功能尚未就绪。 |
The device, %1, is not ready for access yet. |
| 0xC0040010 | 请求的格式与 %1 不合。 |
The request is incorrectly formatted for %1. |
| 0xC0040011 | 所加载的驱动程序的版本错误。 |
The wrong version of the driver has been loaded. |
| 0xC0040012 | 这个驱动程序某方面不合 %1 的需求。 |
The driver beneath this one has failed in some way for %1. |
| 0xC0040013 | 设备 %1 已重置。 |
The device, %1, has been reset. |
| 0xC0040014 | 传输驱动程序收到与协议不符的帧。 |
A transport driver received a frame which violated the protocol. |
| 0xC0040015 | 检测到两个驱动程序间有冲突存在，其原因为声明的内存区域重叠。驱动程序 %2 和设备 声明内存范围的起始地址在数据地址 0x28 和 0x2c 上，长度则在数据地址 0x30 上。 |
A conflict has been detected between two drivers which claimed two overlappingmemory regions.Driver %2, with device , claimed a memory range with starting addressin data address 0x28 and 0x2c, and length in data address 0x30. |
| 0xC0040016 | 检测到两个驱动程序间有冲突存在，其原因为声明的 IO 端口区域重叠。驱动程序 %2 和设备 声明 IO 端口范围的起始地址在数据地址 0x28 和 0x2c 上，长度则在数据地址 0x30 上。 |
A conflict has been detected between two drivers which claimed two overlappingIo port regions.Driver %2, with device , claimed an IO port range with starting addressin data address 0x28 and 0x2c, and length in data address 0x30. |
| 0xC0040017 | 检测到两个驱动程序间有冲突存在，其原因为所宣告的 DMA 通道相同。驱动程序 %2 和设备 宣告 DMA 信道在数据地址 0x28上，而选用性端口在数据地址 0x2c 上。 |
A conflict has been detected between two drivers which claimed equivalent DMAchannels.Driver %2, with device , claimed the DMA Channel in data address 0x28, withoptinal port in data address 0x2c. |
| 0xC0040018 | 检测到二个驱动程序间有冲突存在，其原因为所声明的 IRQ 相同。驱动程序 %2 和设备 声明的中断等级在数据地址0x28 上，矢量在数据地址 0x2c 上，相似性则在数据地址 0x30 上。 |
A conflict has been detected between two drivers which claimed equivalent IRQs.Driver %2, with device , claimed an interrupt with Level in data address0x28, vector in data address 0x2c and Affinity in data address 0x30. |
| 0xC0040019 | 驱动程序检测到某设备的固件过旧或时效已过。将不会使用该设备。 |
The driver has detected a device with old or out-of-date firmware. Thedevice will not be used. |
| 0xC004001B | 因为与其他设备冲突，此设备无法分配一或多个必须的资源。“%2”的设备 DMA 设置无法合乎请求，因为与驱动程序“%3”冲突。 |
The device could not allocate one or more required resources due to conflictswith other devices. The device DMA setting of '%2' could not besatisified due to a conflict with Driver '%3'. |
| 0xC004001C | 因为与其他设备冲突，此设备无法分配一或多个必须的资源。“%2”的设备中断设置无法合乎请求，因为与驱动程序“%3”冲突。 |
The device could not allocate one or more required resources due to conflictswith other devices. The device interrupt setting of '%2' could not besatisified due to a conflict with Driver '%3'. |
| 0xC004001D | 因为与其他设备冲突，此设备无法分配一或多个必须的资源。“%2”的设备内存设置无法合乎请求，因为与驱动程序“%3”冲突。 |
The device could not allocate one or more required resources due to conflictswith other devices. The device memory setting of '%2' could not besatisified due to a conflict with Driver '%3'. |
| 0xC004001E | 因为与其他设备冲突，此设备无法分配一或多个必须的资源。“%2”的设备端口设置无法合乎请求，因为与驱动程序“%3”冲突。 |
The device could not allocate one or more required resources due to conflictswith other devices. The device port setting of '%2' could not besatisified due to a conflict with Driver '%3'. |
| 0xC004001F | 设备 %1上的 %2 文件有一个损坏的磁盘区。 |
The file %2 on device %1 contains a bad disk block. |
| 0xC0040029 | 磁盘上的文件系统结构已损坏，不能使用。请在标签为“%2”的 %1 设备上运行 chkdsk 实用程序。 |
The file system structure on the disk is corrupt and unusable.Please run the chkdsk utility on the device %1 with label \"%2\". |
| 0xC004002A | 用户磁盘配额信息不可用。若要确保准确性，将重建标签为“%2”的设备 %1 上的文件系统配额信息。 |
The user disk quota information is unusable.To ensure accuracy, the file system quota information on the device %1 with label \"%2\" willbe rebuilt. |
| 0xC004002B | 系统睡眠操作失败 |
The system sleep operation failed |
| 0xC004002C | 系统未能为转储文件获得文件检索指针。 |
The system could not get file retrieval pointers for the dump file. |
| 0xC004002D | 系统未能成功加载故障转储驱动程序。 |
The system could not sucessfully load the crash dump driver. |
| 0xC004002E | 故障转储初始化未成功 |
Crash dump initialization failed! |
| 0xC004002F | 试图配置直接转储时，在页面文件中发现一个有效的故障转储。直接转储被禁用!这种现象发生在直接转储选项被设在注册表中，但一个停止错误出现在配置结束之前 |
A valid crash dump was found in the paging file while trying to configurea direct dump. Direct dump is disabled! This occurs when the direct dumpoption is set in the registry but a stop error occured before configurationcompleted |
| 0xC0040030 | 直接转储配置未成功。验证文件名，并确保目标设备不是一个容错集成员，远程或软盘设备。造成失败的原因可能是转储设备上没有足够的空间来创建转储文件。 |
Direct dump configuration failed. Validate the filename and make sure the target deviceis not a Fault Tolerant set member, remote, or floppy device. The failure maybe because there is not enough room on the dump device to create the dump file. |
| 0xC0040031 | 为故障转储配置页面文件没有成功。确保启动分区上有一个页面文件，并且有足够大的空间容纳所有物理内存。 |
Configuring the Page file for crash dump failed. Make sure there is a pagefile on the boot partition and that is large enough to contain all physicalmemory. |
| 0xC0040037 | 磁盘上的文件系统结构已损坏，不能使用。请在卷 %2 上运行 chkdsk 实用程序。 |
The file system structure on the disk is corrupt and unusable.Please run the chkdsk utility on the volume %2. |
| 0xC004006C | %2 设备 %1 的驱动程序 %3 无法摆脱无限循环。这通常说明设备本身有问题或者设备驱动程序汇编硬件时有问题。请跟硬件设备供应商联系，取得驱动程序更新。 |
The driver %3 for the %2 device %1 got stuck in an infinite loop. Thisusually indicates a problem with the device itself or with the devicedriver programming the hardware incorrectly. Please check with yourhardware device vendor for any driver updates. |
| 0xC0040075 | 由于长时间没有运行，设备 %1 的驱动程序检测到端口超时。所有关联的总线被重置以便清除超时操作。 |
The driver for device %1 detected a port timeout due to prolonged inactivity. All associated busses were reset in an effort to clear the condition. |
| 0xC0040096 | 磁盘 %2 已达到逻辑块预配永久资源耗尽条件。 |
Disk %2 has reached a logical block provisioning permanent resource exhaustion condition. |
| 0xC004009A | 由于硬件错误，磁盘 %3 (PDO 名称: %4)的逻辑块地址 %2 处的 IO 操作失败。 |
The IO operation at logical block address %2 for Disk %3 (PDO name: %4) failed due to a hardware error. |
| 0xC00400A1 | 由于在创建转储期间出错，创建转储文件失败。 |
Dump file creation failed due to error during dump creation. |
| 0xC005003D | 汇报的机器检查事件是一个汇报给 CPU %1 的严重级别 %3 缓存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal level %3 Cache error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005003F | 汇报的机器检查事件是一个汇报给 CPU %1 的严重级别 %3 转换缓冲区错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal level %3 translation Buffer error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050041 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重外部/内部总线错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal External/Internal bus error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050043 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重内部 CPU 寄存器访问错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal internal CPU register access error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050045 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重微体系结构错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal Micro Architecture Structure error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050047 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重未知物理位置的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal ECC memory error at an unknown physical address reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050049 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重物理位置 %3 的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal ECC memory error at physical address %3 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005004B | 汇报的机器检查事件是一个汇报给 CPU %1 的严重内存模块 %4 上的物理位置 %3 的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal ECC memory error at physical address %3 on memory module %4 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005004D | 汇报的机器检查事件是一个汇报给 CPU %1 的严重内存卡 %5 上内存模块 %4 上的物理位置 %3 的 ECC 内存错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal ECC memory error at physical address %3 on memory module %4 on memory card %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005004F | 汇报的机器检查事件是一个汇报给 CPU %1 的严重系统事件错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal System Event error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050051 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 PCI 总线奇偶校验错误(在 PCI 总线 %5、地址 %4 的事务类型 %3 期间发生)。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus Parity error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050053 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 PCI 总线奇偶校验错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus Parity error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050055 | 汇报的机器检查事件是一个汇报给 CPU %1 的 PCI 总线 %5 上地址 %4 的事务类型 %3 期间发生的严重 PCI 总线 SERR 错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus SERR error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050057 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 PCI 总线 SERR 错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus SERR error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050059 | 汇报的机器检查事件是一个汇报给 CPU %1 的 PCI 总线 %5 上地址 %4 的事务类型 %3 期间发生的严重 PCI 总线主机中止错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus Master abort error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005005B | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 PCI 总线主机中止错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus Master abort error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005005D | 汇报的机器检查事件是一个汇报给 CPU %1 的 PCI 总线 %5 上地址 %4 的事务类型 %3 期间发生的严重 PCI 总线超时错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus Timeout error during a transaction type %3 at address %4 on PCI bus %5 reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC005005F | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 PCI 总线超时错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI bus Timeout error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050061 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重未知 PCI 总线超时错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is an unknown fatal PCI bus error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050063 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 PCI 组件错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal PCI component error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050065 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重 SMBIOS 设备类型 %3 错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal SMBIOS Device Type %3 error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050067 | 汇报的机器检查事件是一个汇报给 CPU %1 的平台特定错误。记录中还含有其他 %2 个错误。 |
Machine Check Event reported is a fatal Platform Specific error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050069 | 汇报的机器检查事件是一个汇报给 CPU %1 的严重错误。 |
Machine Check Event reported is a fatal error reported to CPU %1. |
| 0xC005006B | 汇报的机器检查事件是一个严重的错误。 |
Machine Check Event reported is a fatal error. |
| 0xC0050072 | 汇报的机器检查事件是汇报给 CPU %1 的严重 CPU 错误。记录中还包括其他 %2 个错误。 |
Machine Check Event reported is a fatal CPU error reported to CPU %1. %2 additional error(s) are contained within the record. |
| 0xC0050078 | 报告的计算机检查事件是一个内存层次结构错误。%r 事务类型: %1%r 内存层次结构级别: %2%r 请求类型: %3%r 类型: %4 |
Machine Check Event reported is a fatal memory hierarchy error.%r Trasaction Type: %1%r Memory Hierarchy Level: %2%r Request Type: %3%r Address: %4 |
| 0xC0050079 | 报告的计算机检查事件是一个 TLB 错误。%r 事务类型: %1%r 内存层次结构级别: %2%r 地址: %3 |
Machine Check Event reported is a fatal TLB error.%r Transaction Type: %1%r Memory Hierarchy Level: %2%r Address: %3 |
| 0xC005007A | 报告的计算机检查事件是一个总线或互连错误。%r 内存层次结构级别: %1%r 参与: %2%r 请求类型: %3%r 内存/IO: %4%r 地址: %5 |
Machine Check Event reported is a fatal Bus or Interconnect error.%r Memory Hierarchy Level: %1%r Participation: %2%r Request Type: %3%r Memory/IO: %4%r Address: %5 |
| 0xC005007B | 报告的计算机检查事件是一个总线或互连超时错误%r 内存层次结构级别: %1%r 参与: %2%r 请求类型: %3%r 内存/IO: %4%r 地址: %5 |
Machine Check Event reported is a fatal Bus or Interconnect timeout error.%r Memory Hierarchy Level: %1%r Participation: %2%r Request Type: %3%r Memory/IO: %4%r Address: %5 |
| 0xC005007C | 报告的计算机检查事件是一个内部监视器计时器错误。 |
Machine Check Event reported is a fatal internal watchdog timer error. |
| 0xC005007E | 报告的计算机检查事件是致命的 Microsoft ROM 奇偶校验错误。 |
Machine Check Event reported is a fatal microsoft ROM parity error. |
| 0xC005007F | 报告的计算机检查事件是致命的情况。处理器收到了已发生无法恢复的错误的外部信号。 |
Machine Check Event reported is a fatal condition. A processor received an external signal that an unrecoverable error has occurred. |
| 0xC0050080 | 报告的计算机检查事件是致命的功能冗余检查错误。 |
Machine Check Event reported is a fatal functional redundancy check error. |