| 1657 | 防火墙日志文件(*.log) *.log |
Firewall log files (*.log) *.log |
| 1658 | 浏览 |
Browse |
| 1659 | 日志 |
log |
| 1675 | 输入的日志文件大小无效。请输入介于 1 到 32767 K 的值。 |
The value entered for the log file size is not valid. Enter a value between 1 and 32767 k. |
| 23000 | 文件和打印机共享 |
File and Printer Sharing |
| 23001 | NetBIOS 名称服务 |
NetBIOS Name Service |
| 23002 | NetBIOS 数据报服务 |
NetBIOS Datagram Service |
| 23004 | NetBIOS 会话服务 |
NetBIOS Session Service |
| 23005 | TCP 上的 SMB |
SMB over TCP |
| 23006 | UPnP 框架 |
UPnP Framework |
| 23007 | UPnP 框架的 SSDP 组件 |
SSDP Component of UPnP Framework |
| 23008 | TCP 上的 UPnP 框架 |
UPnP Framework over TCP |
| 23009 | 远程桌面 |
Remote Desktop |
| 23012 | 域名服务器(DNS) |
Domain Name Server (DNS) |
| 23013 | 动态主机配置协议(DHCP)服务器 |
Dynamic Host Configuration Protocol Server (DHCP) |
| 23014 | 动态主机配置协议(DHCP)客户端 |
Dynamic Host Configuration Protocol Client (DHCP) |
| 23015 | 传入连接 VPN (PPTP) |
Incoming Connection VPN (PPTP) |
| 23016 | 传入连接 VPN (L2TP) |
Incoming Connection VPN (L2TP) |
| 23017 | IP 安全 (IPsec - IKE) |
IP Security (IPsec - IKE) |
| 23018 | IP 安全 (IPsec - IKE/NAT-T) |
IP Security (IPsec - IKE/NAT-T) |
| 23038 | 阶段 1: 本地地址 = %s，远程地址 = %s |
Phase 1: Local address = %s, Remote address = %s |
| 23039 | 阶段 2: 本地地址 = %s，远程地址 = %s |
Phase 2: Local address = %s, Remote address = %s |
| 23040 | ，协议 = 0x%x |
, Protocol = 0x%x |
| 23041 | ，协议 = Any |
, Protocol = Any |
| 23042 | ，本地端口 = 0x%x |
, Local port = 0x%x |
| 23043 | ，本地端口 = Any |
, Local port = Any |
| 23044 | ，远程端口 = 0x%x |
, Remote port = 0x%x |
| 23045 | ，远程端口 = Any |
, Remote port = Any |
| 23090 | Windows Firewall |
Windows Firewall |
| 23091 | Windows 防火墙通过阻止未授权用户通过 Internet 或网络访问你的计算机来帮助保护计算机。 |
Windows Firewall helps protect your computer by preventing unauthorized users from gaining access to your computer through the Internet or a network. |
| 23092 | Windows Firewall Authorization Driver |
Windows Firewall Authorization Driver |
| 23093 | Windows 防火墙授权驱动程序是一种内核模式驱动程序，可针对入站和出站网络流量提供深度检测服务。 |
Windows Firewall Authorization Driver is a kernel mode driver that provides deep inspection services on inbound and outbound network traffic. |
| 23094 | 允许通过身份验证的 IPSec 旁路 |
Allow authenticated IPsec bypass |
| 23095 | 允许特定的计算机在不受限制但需经过身份验证的情况下访问该计算机。 |
Allows specific computers to have unrestricted, but authenticated, access to the computer. |
| 23100 | 是 |
Yes |
| 23101 | 否 |
No |
| 23102 | 已启用 |
Enabled |
| 23103 | 已禁用 |
Disabled |
| 23104 | 组策略 |
Group Policy |
| 23105 | 本地策略 |
Local Policy |
| 23106 | 组和本地策略 |
Group and Local Policy |
| 23107 | 域 |
Domain |
| 23108 | 专用 |
Private |
| 23109 | 全部接口 |
All interfaces |
| 23110 | 关闭 |
Off |
| 23111 | 启用 |
On |
| 23112 | 不允许例外 |
Don't allow exceptions |
| 23113 | 全部子网 |
All subnets |
| 23114 | 仅本地子网 |
Local subnet only |
| 23115 | 自定义子网 |
Custom subnets |
| 23116 | 添加 |
Add |
| 23117 | 删除 |
Remove |
| 23118 | 修改 |
Modify |
| 23119 | 允许传出不可达目标 |
Allow outgoing destination unreachable |
| 23120 | 允许传出源抑制 |
Allow outgoing source quench |
| 23121 | 允许重定向 |
Allow redirect |
| 23122 | 允许传入回显请求 |
Allow incoming echo request |
| 23123 | 允许传入路由器请求 |
Allow incoming router request |
| 23124 | 允许传出时间超时 |
Allow outgoing time exceeded |
| 23125 | 允许传出参数问题 |
Allow outgoing parameter problem |
| 23126 | 允许传入时间戳请求 |
Allow incoming timestamp request |
| 23127 | 允许传入掩码请求 |
Allow incoming mask request |
| 23128 | 允许传出数据包太大 |
Allow outgoing packet too big |
| 23129 | 已从存储区成功分析规则。 |
The rule was parsed successfully from the store. |
| 23130 | 规则来自较新版本的服务。某些字段无法理解并且已被忽略。这可能导致这些规则的限制低于创建规则时所在的版本上的限制。为了避免这种回退行为造成的任何风险，请确保原始规则尽可能详细。若要避免这种回退行为，请创建版本特定的 GPO，或对规则应用平台条件。 |
The rule is from a later version of the service. Some fields were not understood and have been ignored. This may cause the rule to be less restrictive than on the version where it was created. To mitigate any risk from this fallback behavior, ensure that the original rule is as specific as possible. To avoid this fallback behavior, create version-specific GPO's, or apply a Platform condition to the rule. |
| 23131 | 规则来自晚于服务的架构版本，无法忽略未知字段。已忽略整个规则。 |
The rule is from a newer schema version than the service, and the unknown fields could not be ignored. The whole rule was ignored. |
| 23132 | 名称包含无效的字符，或具有无效的长度。 |
The name contains invalid characters, or is an invalid length. |
| 23133 | 描述包含无效的字符，或具有无效的长度。 |
The description contains invalid characters, or is an invalid length. |
| 23134 | 应用程序包含无效的字符，或具有无效的长度。 |
The application contains invalid characters, or is an invalid length. |
| 23135 | 服务包含无效的字符，或具有无效的长度。 |
The service contains invalid characters, or is an invalid length. |
| 23136 | 已授权的远程计算机列表包含无效的字符，或具有无效的长度。 |
The authorized remote machines list contains invalid characters, or is an invalid length. |
| 23137 | 已授权的远程用户列表包含无效的字符，或具有无效的长度。 |
The authorized remote users list contains invalid characters, or is an invalid length. |
| 23138 | 组(有时称为嵌入的上下文)包含无效的字符，或具有无效的长度。 |
The group (sometimes called the embedded context) contains invalid characters, or is an invalid length. |
| 23139 | 该服务无法分析该规则。 |
The service was unable to parse the rule. |
| 23140 | 指定的端口范围无效，或已将 0 用作端口号。 |
An invalid port range was specified, or 0 was used as a port number. |
| 23141 | 远程地址上指定的某些关键字只对本地地址有效。 |
Some of the keywords specified on the remote address are only valid on the local address. |
| 23142 | 接口数与接口缓冲区不匹配。 |
Number of interfaces and interface buffer don't match. |
| 23143 | 接口类型无效。 |
The interface type is invalid. |
| 23144 | 操作无效。 |
The action is invalid. |
| 23145 | 方向无效。 |
The direction is invalid. |
| 23146 | 协议特定的选项与所选协议不匹配。 |
The protocol-specific options do not match the protocol that was chosen. |
| 23147 | 已成功分析规则，但是处理规则时出现未知语义错误。 |
The rule was parsed successfully, but there was an unknown semantic error when processing the rule. |
| 23148 | 出现错误。 |
An error occurred. |
| 23149 | 启用 Windows 防火墙 |
Enable Windows Firewall |
| 23150 | 禁用隐藏模式 |
Disable Stealth Mode |
| 23151 | Windows 防火墙防护模式 |
Windows Firewall Shielded Mode |
| 23152 | 禁止对多播的单播响应 |
Disable Unicast Responses to Multicast |
| 23153 | 记录丢弃的数据包 |
Log Dropped Packets |
| 23154 | 记录成功的连接 |
Log Successful Connections |
| 23155 | 记录忽略的规则 |
Log Ignored Rules |
| 23156 | 最大日志文件大小 |
Maximum Log File Size |
| 23157 | 日志文件路径 |
Log File Path |
| 23158 | 禁用入站通知 |
Disable Inbound Notifications |
| 23159 | 允许对已授权应用程序进行用户首选合并 |
Allow User preferred merge of Authorized Applications |
| 23160 | 允许对全局打开的端口进行用户首选合并 |
Allow User preferred merge of Globally open ports |
| 23161 | 允许本地策略合并 |
Allow Local Policy Merge |
| 23162 | 允许本地 IPsec 策略合并 |
Allow Local IPsec Policy Merge |
| 23163 | 禁用的接口 |
Disabled Interfaces |
| 23164 | 默认的出站操作 |
Default Outbound Action |
| 23165 | 默认的入站操作 |
Default Inbound Action |
| 23166 | 当前配置文件 |
Current Profile |
| 23167 | 禁用状态 FTP |
Disable Stateful FTP |
| 23168 | 忽略禁用状态 PPTP |
Ignored Disable Stateful PPTP |
| 23169 | IPsec SA 空闲时间 |
IPsec SA Idle time |
| 23170 | IPSec 预共享密钥编码 |
IPsec preshared key encoding |
| 23171 | IPsec 免除 |
IPsec Exempt |
| 23172 | IPsec CRL 检查 |
IPsec CRL Check |
| 23173 | |
|
| 23174 | 允许 |
Allow |
| 23175 | 阻止 |
Block |
| 23176 | 规则 ID 包含无效的字符，或具有无效的长度。 |
The rule ID contains invalid characters, or is an invalid length. |
| 23177 | 阶段 1 身份验证集 ID 包含无效的字符，或具有无效的长度。 |
The phase 1 auth set ID contains invalid characters, or is an invalid length. |
| 23178 | 快速模式加密集 ID 包含无效的字符，或具有无效的长度。 |
The quick mode crypto set ID contains invalid characters, or is an invalid length. |
| 23179 | 主模式加密集 ID 包含无效的字符，或具有无效的长度。 |
The main mode crypto set ID contains invalid characters, or is an invalid length. |
| 23180 | 无法解析应用程序名称。 |
The application name could not be resolved. |
| 23181 | 未指定规则 ID。 |
The Rule ID was not specified. |
| 23182 | 端口数与端口缓冲区不匹配。 |
Mismatch in number of ports and ports buffer. |
| 23183 | 某个端口关键字无效。 |
One of the port keywords is invalid. |
| 23184 | V4 地址子网数与子网缓冲区不匹配。 |
Mismatch in number of V4 address subnets and subnets buffer. |
| 23185 | V6 地址子网数与子网缓冲区不匹配。 |
Mismatch in number of V6 address subnets and subnets buffer. |
| 23186 | V4 地址范围数与范围缓冲区不匹配。 |
Mismatch in number of V4 address ranges and ranges buffer. |
| 23187 | V6 地址范围数与范围缓冲区不匹配。 |
Mismatch in number of V6 address ranges and ranges buffer. |
| 23188 | 地址范围无效。结束地址小于开始地址。 |
The address range is invalid. The end address is less than the beginning address. |
| 23189 | 一个或多个子网掩码无效。 |
One or more of the subnet masks is invalid. |
| 23190 | 一个或多个地址前缀无效。 |
One or more of the address prefixes is invalid. |
| 23191 | 一个或多个地址关键字无效。 |
One or more of the address keywords are invalid. |
| 23192 | 本地地址上指定的某些关键字只对远程地址有效。 |
Some of the keywords specified on the local address are only valid on the remote address. |
| 23193 | ICMP 数与 ICMP 缓冲区不匹配。 |
Mismatch in number of ICMP and ICMP buffer. |
| 23194 | 指定的 ICMP 代码无效。 |
Invalid ICMP code specified. |
| 23195 | 已指定允许绕过操作，但是规则不符合允许绕过条件(指定的入站、身份验证/加密标志集、远程计算机身份验证列表) |
Allow-Bypass action specified, but the rule does not meet allow-bypass criteria (inbound, authenticate/encrypt flags set, remote machine auth list specified) |
| 23196 | 协议编号无效。 |
The protocol number is invalid. |
| 23197 | 指定的标志无效。 |
Invalid flags specified. |
| 23198 | 已设置自动生成标志，但未设置身份验证/身份验证加密标志。 |
Autogenerate flag is set but Authenticate / Authenticate-encrypt flags are not set. |
| 23199 | 已设置自动生成标志，但操作为阻止。 |
Autogenerate flag is set but the action is block. |
| 23200 | 已经与动态 RPC 标志一起设置了自动生成标志。 |
Autogenerate flag is set along with Dynamic RPC flag. |
| 23201 | 不能同时使用身份验证标志以及身份验证和加密标志。 |
The Authentication and Authentication & Encryption flags cannot be used together. |
| 23202 | 仅当规则需要进行身份验证时，才能使用身份验证列表。 |
Authorization lists can only be used if authentication is required on the rule. |
| 23203 | 有效操作系统平台数与有效操作系统平台列表不匹配 |
Number of valid OS Platforms and the list of valid OS Platforms don't match |
| 23204 | 必须指定阶段 1 身份验证集 ID。 |
The phase 1 auth set ID must be specified. |
| 23205 | 必须指定快速模式加密集 ID。 |
The quick mode crypto set ID must be specified. |
| 23206 | 未指定集 ID。 |
The Set ID was not specified. |
| 23207 | IPsec 阶段无效。 |
The IPsec phase is invalid. |
| 23208 | 集中未指定任何套件。 |
No suites specified in the set. |
| 23209 | 某个阶段 1 身份验证方法无效。 |
One of the phase 1 auth methods is invalid. |
| 23210 | 某个阶段 2 身份验证方法无效。 |
One of the phase 2 auth methods is invalid. |
| 23211 | 匿名不能是唯一的身份验证方法。 |
Anonymous cannot be the only authentication method. |
| 23212 | 指定的身份验证套件标志无效。 |
Invalid auth suite flags specified. |
| 23213 | 如果计算机证书是计算机运行状况证书，则只能在阶段 2 身份验证中使用。 |
Machine certificates can only be used in phase 2 auth if they are machine health certificates. |
| 23214 | 已选择计算机预共享密钥作为身份验证类型，但未指定任何密钥字符串。 |
Machine Preshared Key was selected as an authentication type, but no key string was specified. |
| 23215 | 需要证书颁发机构名称，并且该名称必须采用与 X.509 可分辨名称相同的格式。 |
The certificate authority name is required, and must be formatted as an X.509 distinguished name. |
| 23216 | 不能在同一身份验证集中同时建议计算机身份验证和用户身份验证。 |
Both machine and user auth cannot be proposed within the same authentication set. |
| 23217 | 必须指定主模式加密集 ID。 |
The main mode crypto set ID must be specified. |
| 23218 | 阶段 1 加密集标志无效。 |
The phase 1 crypto set flags are invalid. |
| 23219 | 主模式生存时间(以分钟为单位)无效。 |
The main mode lifetime, in minutes, is invalid. |
| 23220 | 主模式生存时间(以会话为单位)无效。 |
The main mode lifetime, in sessions, is invalid. |
| 23221 | 某个主模式密钥交换算法无效。 |
One of the main mode key exchange algorithms is invalid. |
| 23222 | 某个主模式加密算法无效。 |
One of the main mode encryption algorithms is invalid. |
| 23223 | 某个主模式哈希算法无效。 |
One of the main mode hash algorithms is invalid. |
| 23224 | 某个快速模式密钥交换算法无效。 |
One of the quick mode key exchange algorithms is invalid. |
| 23225 | 某个快速模式封装类型无效。 |
One of the quick mode encapsulation types is invalid. |
| 23226 | 某个快速模式加密算法无效。 |
One of the quick mode encryption algorithms is invalid. |
| 23227 | 某个快速模式哈希算法无效。 |
One of the quick mode hash algorithms is invalid. |
| 23228 | 快速模式生存时间(以分钟为单位)无效。 |
The quick mode lifetime, in minutes, is invalid. |
| 23229 | 快速模式生存时间(以 KB 为单位)无效。 |
The quick mode lifetime, in kilobytes, is invalid. |
| 23230 | 只能对入站规则应用远程用户身份验证。 |
Remote user authorization can only be applied to inbound rules. |
| 23231 | 已指定未指定的多播、广播或环回 IPv6 地址。 |
An unspecified, multicast, broadcast, or loopback IPv6 address was specified. |
| 23232 | 如果操作是 Do Not Secure，则身份验证集和加密集必须为空。 |
If the action is Do Not Secure, the auth and crypto sets must be null. |
| 23233 | 必须指定加密或哈希。 |
Either Encryption or Hash must be specified. |
| 23234 | 在需要安全或需要加密时指定了“阻止”操作。 |
Block action was specified in conjunction with require security or require encryption. |
| 23235 | 未找到阶段 1 身份验证集。 |
The phase 1 authentication set was not found. |
| 23236 | 未找到阶段 2 身份验证集。 |
The phase 2 authentication set was not found. |
| 23237 | 未找到快速模式加密集。 |
The quick mode cryptographic set was not found. |
| 23238 | 在阶段 1 和阶段 2 身份验证集之间检测到冲突。如果在阶段 1 中使用预共享密钥，则不能在阶段 2 身份验证集中使用该密钥。 |
A conflict was detected between the phase 1 and phase 2 authentication sets. When preshared keys are used in phase 1, there cannot be a phase 2 authentication set. |
| 23239 | 本地地址不能与接口或接口类型条件一起使用。 |
A local address cannot be used in conjunction with an interface or interface type condition. |
| 23240 | 程序名 |
Program Name |
| 23241 | 接口 |
Interfaces |
| 23242 | 本地地址 |
Local Addresses |
| 23243 | 远程地址 |
Remote Addresses |
| 23244 | 本地端口 |
Local Port |
| 23245 | 远程端口 |
Remote Port |
| 23246 | EndPoint 1 地址 |
EndPoint 1 Addresses |
| 23247 | 终结点 2 地址 |
EndPoint 2 Addresses |
| 23248 | 终结点 1 端口 |
Endpoint 1 Port |
| 23249 | 终结点 2 端口 |
Endpoint 2 Port |
| 23250 | 未配置 |
Not Configured |
| 23251 | 配置文件类型无效。 |
The profile type is invalid. |
| 23252 | 公用 |
Public |
| 23253 | 已指定未指定的多播、广播或环回 IPv4 地址。 |
An unspecified, multicast, broadcast, or loopback IPv4 address was specified. |
| 23254 | 不能在同一身份验证集中同时建议计算机运行状况证书和常规证书。 |
Machine health certificates and regular certificates cannot both be proposed within the same authentication set. |
| 23255 | 无 |
None |
| 23256 | 不能为隧道模式规则指定 "any" 终结点。 |
Endpoint 'any' cannot be specified for a tunnel-mode rule. |
| 23257 | 通过 NAT 的 IPsec |
IPsec Through NAT |
| 23258 | 策略版本 |
Policy Version |
| 23259 | 不支持指定的目标架构版本。 |
The target schema version specified is not supported. |
| 23260 | 在一个集中不能多次使用同一身份验证方法。 |
The same authentication method cannot be used more than once within a set. |
| 23261 | 未使用该错误值。 |
This error value is not used. |
| 23262 | 目标架构版本不支持端口范围。 |
The target schema version does not support port ranges. |
| 23263 | 方向为出站时不能使用身份验证(动态加密)标志。 |
The Authentication (Dynamic Encryption) flag cannot be used when direction is Outbound. |
| 23264 | 设置身份验证(动态加密)标志时，还必须设置身份验证和加密标志。 |
When the Authentication (Dynamic Encryption) flag is set, the Authentication & Encryption flag must be set as well. |
| 23265 | 目标架构版本不支持身份验证(动态加密)。 |
The target schema version does not support Authentication (Dynamic Encryption). |
| 23266 | 目标架构版本不支持出站允许绕过规则。 |
The target schema version does not support outbound Allow-Bypass rules. |
| 23267 | 已指定允许绕过操作，但规则不符合允许绕过条件(身份验证/加密标志集) |
Allow-Bypass action specified, but the rule does not meet allow-bypass criteria (authenticate/encrypt flags set) |
| 23268 | 只能在防火墙规则中使用“遵从用户”设置，因为在该规则中不使用任何附加条件来指定程序路径和 TCP/UDP 协议。 |
Defer to user' setting can only be used in a firewall rule where program path and TCP/UDP protocol are specified with no additional conditions. |
| 23269 | 仅当操作为 Do Not Secure 时，才允许在连接安全规则中使用端口范围。 |
Port ranges are only allowed in connection security rules when the action is Do Not Secure. |
| 23270 | 目标架构版本不支持指定的平台运算符。 |
The target schema version does not support the platform operator specified. |
| 23271 | DTM 标志至少需要一个动态终结点。 |
The DTM flag requires at least one dynamic endpoint. |
| 23272 | 动态隧道模式免除规则不能具有隧道终结点。 |
A dynamic tunnel-mode exemption rule cannot have tunnel endpoints. |
| 23273 | 目标架构版本不支持隧道模式免除。 |
The target schema version does not support tunnel-mode exemptions. |
| 23274 | 仅当使用 IPsec 隧道时才能设置身份验证模式“要求入站和清除出站”。 |
Authentication mode,"Require inbound and clear outbound" can only be set when using IPsec tunneling. |
| 23275 | 不能在传输模式规则上设置“如果安全则绕过通道”。 |
Bypass Tunnel If Secure may not be set on Transport-Mode rules. |
| 23276 | 某个平台运算符无效。 |
One of the platform operators is invalid. |
| 23277 | %s 已从 Windows 防火墙中注销。 |
%s unregistered from Windows Firewall. |
| 23278 | %s 已从 Windows 防火墙中注销。Windows 防火墙现在正在控制对 %s 的筛选。 |
%s unregistered from Windows Firewall. Windows Firewall is now controlling the filtering for %s. |
| 23279 | FirewallRuleCategory |
FirewallRuleCategory |
| 23280 | ConSecRuleCategory |
ConSecRuleCategory |
| 23281 | StealthRuleCategory |
StealthRuleCategory |
| 23282 | BootTimeRuleCategory |
BootTimeRuleCategory |
| 23283 | , |
, |
| 23284 | 不能在隧道模式规则上指定身份验证(无封装)。 |
Authentication (No Encapsulation) cannot be specified on a tunnel-mode rule. |
| 23285 | 不能在使用预共享密钥的规则上指定身份验证(无封装)。 |
Authentication (No Encapsulation) cannot be specified on a rule that uses a preshared key. |
| 23286 | 目标架构版本不支持证书条件。 |
The target schema version does not support certificate criteria. |
| 23287 | 证书条件版本与架构版本不匹配。 |
Certificate criteria version does not match schema version. |
| 23288 | 证书条件无效。在使用 FollowRenewal 时，必须指定指纹哈希。 |
The certificate criteria are invalid. A thumbprint hash must be specified when FollowRenewal is used. |
| 23289 | 证书条件无效。指纹哈希无效。 |
The certificate criteria are invalid. The thumbprint hash is invalid. |
| 23290 | 证书条件无效。一个或多个 EKU 无效。 |
The certificate criteria are invalid. One or more of the EKU's are invalid. |
| 23291 | 证书条件无效。名称类型无效。 |
The certificate criteria are invalid. The name type is invalid. |
| 23292 | 证书条件无效。使用者名称无效。 |
The certificate criteria are invalid. The subject name is not valid. |
| 23293 | 证书条件无效。条件类型标志无效。 |
The certificate criteria are invalid. The criteria type flags are invalid. |
| 23294 | 证书条件无效。需要使用相同的签名方法为每组证书建议均指定至少一组验证条件和一组选择条件。 |
The certificate criteria are invalid. You need to specify at least one set of validation criteria and one set of selection criteria for each set of certificate proposal with the same signing method. |
| 23295 | 本地用户身份验证列表包含无效的字符，或具有无效的长度。 |
The local user authorization list contains invalid characters, or is an invalid length. |
| 23296 | 不能与服务 SID 一起使用已授权的本地用户列表。 |
The authorized local user list may not be used in conjunction with a service SID. |
| 23297 | 目标架构版本不支持已授权的本地用户列表。 |
The target schema version does not support the authorized local user list. |
| 23298 | 禁用隐藏模式 IPsec 安全数据包免除 |
Disable Stealth Mode IPsec Secured Packet Exemption |
| 23299 | Kerberos 代理名称必须是完全限定的域名(FQDN)。例如: kerbproxy.contoso.com |
The Kerberos proxy name must be a fully qualified domain name (FQDN). For example: kerbproxy.contoso.com |
| 23300 | IPsec 策略代理服务强化 - LDAP/TCP |
IPsec Policy Agent service hardening - LDAP/TCP |
| 23301 | 允许到 Active Directory 的 IPsec 策略代理出站 LDAP/TCP 流量 |
Allow IPsec Policy Agent outbound LDAP/TCP traffic to Active Directory |
| 23302 | IPsec 策略代理服务强化 - LDAP/UDP |
IPsec Policy Agent service hardening - LDAP/UDP |
| 23303 | 允许到 Active Directory 的 IPsec 策略代理出站 LDAP/UDP 流量 |
Allow IPsec Policy Agent outbound LDAP/UDP traffic to Active Directory |
| 23304 | IPsec 策略代理服务强化 - 阻止到 IPsec 策略代理的其他任何流量 |
IPsec Policy Agent service hardening - Block any other traffic to IPsec Policy Agent |
| 23305 | IPsec 策略代理服务强化 - 阻止来自 IPsec 策略代理的其他任何流量 |
IPsec Policy Agent service hardening - Block any other traffic from IPsec Policy Agent |
| 23306 | MpsSvc 服务强化 - 阻止到 MpsSvc 的其他任何流量 |
MpsSvc service hardening - Block any other traffic to MpsSvc |
| 23307 | MpsSvc 服务强化 - 阻止来自 MpsSvc 的其他任何流量 |
MpsSvc service hardening - Block any other traffic from MpsSvc |
| 23308 | %1!s! 的入站服务限制规则 |
Inbound service restriction rule for %1!s! |
| 23309 | 阻止到服务 %1!s! 的所有入站流量 |
Block all inbound traffic to service %1!s! |
| 23310 | %1!s! 的出站服务限制规则 |
Outbound service restriction rule for %1!s! |
| 23311 | 阻止来自服务 %1!s! 的所有出站流量 |
Block all outbound traffic from service %1!s! |
| 23312 | IPsec 策略代理服务强化 - 远程管理 |
IPsec Policy Agent service hardening - Remote Management |
| 23313 | 允许 IPsec 策略代理入站 RPC/TCP 流量用于远程管理 |
Allow IPsec Policy Agent inbound RPC/TCP traffic for Remote Management |
| 23400 | 远程终结点无效。 |
The remote endpoints are invalid. |
| 23401 | 远程终结点 FQDN 无效。 |
The remote endpoint FQDN is invalid. |
| 23402 | 所选密钥模块无效。 |
The choice of key modules is invalid. |
| 23403 | 转发路径 SA 生存时间无效。 |
The forward path SA lifetime is invalid. |
| 23404 | 目标架构版本不支持自定义密钥模块首选项。 |
The target schema version does not support custom key module preferences. |
| 23405 | 目标架构版本不支持传输规则计算机授权列表。 |
The target schema version does not support transport rule machine authorization lists. |
| 23406 | 目标架构版本不支持传输规则用户授权列表。 |
The target schema version does not support transport rule user authorization lists. |
| 23407 | 在隧道模式规则上指定的传输计算机授权 SDDL。 |
Transport machine authorization SDDL specified on tunnel-mode rule. |
| 23408 | 在隧道模式规则上指定的传输用户授权 SDDL。 |
Transport user authorization SDDL specified on tunnel-mode rule. |
| 23409 | 如果还指定了按规则授权列表，则不能使用应用全局授权标志。 |
The Apply Global Authorization flag cannot be used when a per-rule authorization list is also specified. |
| 23410 | 传输规则计算机 SDDL 无效。 |
The transport rule machine SDDL is not valid. |
| 23411 | 传输规则用户 SDDL 无效。 |
The transport rule user SDDL is not valid. |
| 23413 | 第 2 阶段身份验证集 ID 包含无效的字符或长度无效。 |
The phase 2 auth set ID contains invalid characters, or is an invalid length. |
| 23414 | 目标架构版本不支持动态终结点。 |
The target schema version does not support dynamic endpoints. |
| 23415 | 当在 IPv4 和 IPv6 中指定隧道终结点时，隧道终结点对于一个地址系列来说可能不是动态的，对于另一个地址系列来说可能不是显式的。(动态隧道终结点是设置为“任何”的终结点。) |
When specifying tunnel endpoints in both IPv4 and IPv6, a tunnel endpoint may not be dynamic for one address family and explicit for the other. (A dynamic tunnel endpoint is one set to "Any".) |
| 23416 | 边缘遍历标志不一致。必须在没有“边缘遍历”的情况下设置“遵从应用”，但必须在具有“边缘遍历”的情况下设置“遵从用户”。 |
The edge traversal flags are inconsistent. Defer To App must be set without Edge Traversal, but Defer To User must be set with Edge Traversal. |
| 23417 | 目标架构版本不支持身份验证(无封装)。 |
The target schema version does not support Authentication (No Encapsulation). |
| 23418 | 设置身份验证(无封装)标志时，必须同时设置身份验证标志。 |
When the Authentication (No Encapsulation) flag is set, the Authentication flag must be set as well. |
| 23419 | 目标架构版本不支持隧道身份验证模式。 |
The target schema version does not support tunnel authentication modes. |
| 23421 | 目标架构版本不支持 IP_HTTPS 关键字。 |
The target schema version does not support the IP_HTTPS keyword. |
| 23422 | 目标架构版本不支持 IP_TLS 关键字。 |
The target schema version does not support the IP_TLS keyword. |
| 23423 | 目标架构版本不支持动态边缘遍历。 |
The target schema version does not support dynamic edge traversal. |
| 23424 | 本地用户所有者 SID 无效。 |
The local user owner SID is invalid. |
| 23425 | 目标架构版本不支持本地用户所有者字段。 |
The target schema version does not support the local user owner field. |
| 23426 | 目标架构版本不支持配置文件交叉。 |
The target schema version does not support profile crossing. |
| 23427 | 目标架构版本不支持给定的一个或多个地址关键字。 |
The target schema version does not support one or more of the address keywords given. |
| 23428 | 应用程序包 SID 无效。 |
The application package SID is invalid. |
| 23429 | 目标架构版本不支持应用程序包 SID。 |
The target schema version does not support application package SIDs. |
| 23430 | 逻辑终结点 (信任元组)不能与特定地址或端口组合。 |
Logical endpoints (trust tuples) cannot be combined with specific addresses or ports. |
| 23431 | 一个或多个逻辑终结点(信任元组)无效。 |
One or more of the logical endpoints (trust tuples) are invalid. |
| 23432 | 目标架构版本不支持逻辑终结点(信任元组)。 |
The target schema version does not support logical endpoints (trust tuples). |
| 23433 | 目标架构版本不支持密钥管理器听写标志。 |
The target schema version does not support the Key Manager Dictation flag. |
| 23434 | 目标架构版本不支持密钥管理器通知标志。 |
The target schema version does not support the Key Manager Notification flag. |
| 23435 | 目标架构版本不支持给定的一个或多个身份验证方法。 |
The target schema version does not support one or more of the authentication methods given. |
| 23436 | 目标架构版本不支持请求的证书签名算法。 |
The target schema version does not support the requested certificate signing algorithm. |
| 23437 | 目标架构版本不支持将中间 CA 作为目标。 |
The target schema version does not support targeting Intermediate CA's. |
| 23438 | 指定多个证书身份验证建议时，具有相同签名方法的所有证书建议都必须组合在此集中。 |
When specifying multiple certificate authentication proposals, all the certificate proposals with the same signing method must must be grouped together within the set. |
| 23439 | 目标架构版本不支持 kerberos 代理服务器。 |
The target schema version does not support kerberos proxy servers. |
| 23440 | 主模式加密集 ID 应该是全局主模式加密集 ID。 |
The main mode crypto set ID should be the global main mode crypto set ID. |
| 23441 | 目标架构版本不支持所选择的主模式加密算法之一。 |
The target schema version does not support one of the main mode encryption algorithms chosen. |
| 23442 | 目标架构版本不支持所选择的主模式哈希算法之一。 |
The target schema version does not support one of the main mode hash algorithms chosen. |
| 23443 | 目标架构版本不支持所选择的主模式密钥交换算法之一。 |
The target schema version does not support one of the main mode key exchange algorithms chosen. |
| 23444 | 目标架构版本不支持所选择的快速模式加密算法之一。 |
The target schema version does not support one of the quick mode encryption algorithms chosen. |
| 23445 | 目标架构版本不支持所选择的快速模式哈希算法之一。 |
The target schema version does not support one of the quick mode hash algorithms chosen. |
| 23446 | 目标架构版本不支持所选择的快速模式密钥交换算法之一。 |
The target schema version does not support one of the quick mode key exchange algorithms chosen. |
| 23447 | 指定的加密和哈希算法不兼容。 |
The encryption and hash algorithms specified are incompatible. |
| 23448 | 查询格式不正确: ORed 术语的数量与术语数组的数量不匹配 |
Malformed query: Mismatch in the number of ORed terms and the terms array |
| 23449 | 查询格式不正确: ANDed 条件的数量与条件数组的数量不匹配 |
Malformed query: Mismatch in the number of ANDed conditions and conditions array |
| 23450 | 查询格式不正确: 条件匹配密钥无效 |
Malformed query: Invalid confition match key |
| 23451 | 查询格式不正确: 条件匹配类型无效 |
Malformed query: Invalid condition match type |
| 23452 | 查询格式不正确: 条件数据类型无效 |
Malformed query: Invalid condition data type |
| 23453 | 查询格式不正确: 密钥和数据类型组合无效 |
Malformed query: Invalid key and data type combination |
| 23454 | 查询格式不正确: 协议条件存在，但没有一个协议条件 |
Malformed query: Protocol condition present without a protocol condition |
| 23455 | 查询格式不正确: 配置文件密钥无法用于查询的此对象类型 |
Malformed query: Profile Key unavailable for this object type queried |
| 23456 | 查询格式不正确: 状态密钥无法用于查询的此对象类型 |
Malformed query: Status Key unavailable for this object type queried |
| 23457 | 查询格式不正确: FilterID 密钥无法用于查询的此对象类型 |
Malformed query: FilterID Key unavailable for this object type queried |
| 23458 | 查询格式不正确: 应用程序密钥无法用于查询的此对象类型 |
Malformed query: Application Key unavailable for this object type queried |
| 23459 | 查询格式不正确: 协议密钥无法用于查询的此对象类型 |
Malformed query: Protocol Key unavailable for this object type queried |
| 23460 | 查询格式不正确: 本地端口密钥无法用于查询的此对象类型 |
Malformed query: Local Port Key unavailable for this object type queried |
| 23461 | 查询格式不正确: 远程端口密钥无法用于查询的此对象类型 |
Malformed query: Remote Port Key unavailable for this object type queried |
| 23462 | 查询格式不正确: 服务名称密钥无法用于查询的此对象类型 |
Malformed query: Service Name Key unavailable for this object type queried |
| 23463 | 可能未在隧道模式规则上使用身份验证(无封装)。 |
Authentication (No Encapsulation) may not be used on tunnel-mode rules. |
| 23464 | 可能未在包含预共享密钥的规则上使用身份验证(无封装)。 |
Authentication (No Encapsulation) may not be used on rules that contain preshared keys. |
| 23465 | 尝试强制实施此规则时发生运行时错误。 |
A runtime error occurred while trying to enforce the rule. |
| 23466 | 未找到主模式加密集。 |
The main mode cryptographic set was not found. |
| 23467 | 目标架构版本不支持仅本地映射。 |
The target schema version does not support local only mapping. |
| 23468 | 规则中的密钥模块与关联身份验证集中指定的身份验证方法不兼容。 |
The key module in the rule is incompatible with the authentication methods specified in the associated authentication sets. |
| 23469 | 目标架构版本不支持“安全领域”标志。 |
The target schema version does not support Security Realm flag. |
| 23470 | 带有安全领域 ID 字段的防火墙规则将需要身份验证和加密，因此操作应为“允许”。 |
Firewall Rules with security realm Id field would require authentication and encryption, and action should be Allow. |
| 23471 | 安全领域 ID 的字符串无效。 |
A string for the security realm Id is invalid. |
| 23472 | 目标架构版本不支持安全领域 ID。 |
The target schema version does not support security realm Id. |
| 23473 | The Sytem OS Only and Game OS Only flags cannot be used together. |
The Sytem OS Only and Game OS Only flags cannot be used together. |
| 23474 | The target schema version does not support specifying System OS or Game OS flag |
The target schema version does not support specifying System OS or Game OS flag |
| 23475 | The target schema version does not support specifying Development mode flag |
The target schema version does not support specifying Development mode flag |
| 23476 | FQBN 的字符串无效。 |
A string for the FQBN is invalid. |
| 23477 | 目标架构版本无法指定 FQBN。 |
The target schema version does not support specifying fqbn. |
| 23478 | 目标架构版本无法指定分段 ID。 |
The target schema version does not support specifying compartment Id. |
| 23479 | 目标架构版本不支持指定标注和审核标记 |
The target schema version does not support specifying callout and audit flag |
| 23500 | mpssvc |
mpssvc |
| 23501 | Microsoft Corporation |
Microsoft Corporation |
| 23502 | Microsoft Windows 防火墙提供程序 |
Microsoft Windows Firewall Provider |
| 23503 | Windows 防火墙静态会话 |
Windows Firewall Static Session |
| 23504 | Windows 防火墙动态会话 |
Windows Firewall Dynamic Session |
| 23505 | 引导时间筛选器 |
Boot Time Filter |
| 23506 | 此筛选器在服务启动之前起作用。 |
This filter is in effect before the service starts. |
| 23507 | 日志记录筛选器 |
Logging Filter |
| 23508 | 此筛选器可执行日志记录(如果已配置)。 |
This filter implements logging, if configured. |
| 23509 | 防止端口扫描筛选器 |
Port Scanning Prevention Filter |
| 23510 | 此筛选器可防止进行端口扫描。这常常意味着没有侦听器。如果进行调试，请确保你的方案中有一个侦听器。 |
This filter prevents port scanning. This many times means there are no listeners. If debugging ensure your scenario has one. |
| 23511 | 允许环回筛选器 |
Loopback Permit Filter |
| 23512 | 此筛选器允许环回流量。 |
This filter permits loopback traffic. |
| 23513 | 辅助连接筛选器 |
Secondary Connections Filter |
| 23514 | 此筛选器允许 FTP 协议的辅助连接。 |
This filter permits secondary connections for FTP protocols. |
| 23515 | 深度协议检测筛选器 |
Deep Protocol Inspection Filter |
| 23516 | 此筛选器可针对 FTP 协议执行深度检测。 |
This filter implements deep inspection for FTP protocols. |
| 23517 | FTP 检测筛选器 |
FTP Inspection Filter |
| 23518 | 此筛选器可启用 FTP 检测。 |
This filter enables inspection of FTP. |
| 23522 | Microsoft Windows 防火墙 IPSec 提供程序 |
Microsoft Windows Firewall IPsec Provider |
| 23523 | 状态管理筛选器 |
State Management Filter |
| 23524 | 对 WFP 表示不同的选项以允许自定义状态创建。 |
Indicates different options to WFP to allow customization of state creation. |
| 23525 | 状态管理提供程序上下文 |
State Management Provider Context |
| 23526 | 包含状态管理选项 |
Contains State Management Options |
| 23527 | 安全领域 ID 提供程序上下文 |
Security Realm Id Provider Context |
| 23528 | 包含安全领域 ID |
Contains Security Realm Id |
| 23529 | 绑定提供程序上下文的接口 |
Interface to Bind Provider Context |
| 23530 | 包含要绑定到的接口 Id |
Contains The Interface Id to Bind to |
| 23531 | 策略静默模式提供程序上下文 |
Policy Silent Mode Provider Context |
| 23532 | 仅检查但未强制使用该策略 |
The poicy is inspected only but not enforced |
| 23831 | UPnP 框架(TCP-In) |
UPnP Framework (TCP-In) |
| 23832 | UPnP 框架流量的入站规则[TCP] |
Inbound rule for UPnP Framework traffic [TCP] |
| 23833 | UPnP 框架(TCP-Out) |
UPnP Framework (TCP-Out) |
| 23834 | UPnP 框架流量的出站规则[TCP] |
Outbound rule for UPnP Framework traffic [TCP] |
| 23835 | UPnP 框架(UDP-In) |
UPnP Framework (UDP-In) |
| 23836 | UPnP 框架流量的入站规则[UDP] |
Inbound rule for UPnP Framework traffic [UDP] |
| 23837 | UPnP 框架(UDP-Out) |
UPnP Framework (UDP-Out) |
| 23838 | UPnP 框架流量的出站规则[UDP] |
Outbound rule for UPnP Framework traffic [UDP] |
| 24000 | 高级安全 Windows 防火墙 |
Windows Firewall with Advanced Security |
| 24001 | 配置为 Windows 计算机提供增强网络安全的策略。 |
Configure policies that provide enhanced network security for Windows computers. |
| 25000 | 核心网络 |
Core Networking |
| 25001 | 核心网络 - 数据包太大(ICMPv6-In) |
Core Networking - Packet Too Big (ICMPv6-In) |
| 25002 | 核心网络 - 数据包太大(ICMPv6-Out) |
Core Networking - Packet Too Big (ICMPv6-Out) |
| 25007 | 当数据包通过任意节点时，由于数据包对于下一个链路太大而导致该节点无法转发此数据包时，将从该节点发送“数据包太大”错误消息。 |
Packet Too Big error messages are sent from any node that a packet traverses which is unable to forward the packet because the packet is too large for the next link. |
| 25008 | 核心网络 - 路由器请求(ICMPv6-Out) |
Core Networking - Router Solicitation (ICMPv6-Out) |
| 25009 | 核心网络 - 路由器请求(ICMPv6-In) |
Core Networking - Router Solicitation (ICMPv6-In) |
| 25011 | “路由器请求”消息由搜索路由器的节点发送，用于进行无状态自动配置。 |
Router Solicitation messages are sent by nodes seeking routers to provide stateless auto-configuration. |
| 25012 | 核心网络 - 路由器播发(ICMPv6-In) |
Core Networking - Router Advertisement (ICMPv6-In) |
| 25013 | 核心网络 - 路由器播发(ICMPv6-Out) |
Core Networking - Router Advertisement (ICMPv6-Out) |
| 25018 | “路由器播发”消息由路由器发送给其他节点，用于进行无状态自动配置。 |
Router Advertisement messages are sent by routers to other nodes for stateless auto-configuration. |
| 25019 | 核心网络 - 邻居发现请求(ICMPv6-In) |
Core Networking - Neighbor Discovery Solicitation (ICMPv6-In) |
| 25020 | 核心网络 - 邻居发现请求(ICMPv6-Out) |
Core Networking - Neighbor Discovery Solicitation (ICMPv6-Out) |
| 25025 | “邻居发现请求”由节点发送，用于发现其他在链路上的 IPv6 节点的链路层地址。 |
Neighbor Discovery Solicitations are sent by nodes to discover the link-layer address of another on-link IPv6 node. |
| 25026 | 核心网络 - 邻居发现播发(ICMPv6-In) |
Core Networking - Neighbor Discovery Advertisement (ICMPv6-In) |
| 25027 | 核心网络 - 邻居发现播发(ICMPv6-Out) |
Core Networking - Neighbor Discovery Advertisement (ICMPv6-Out) |
| 25032 | “邻居发现播发”由节点发送，用于通知其他节点链路层地址的更改或响应“邻居发现请求”请求。 |
Neighbor Discovery Advertisement messages are sent by nodes to notify other nodes of link-layer address changes or in response to a Neighbor Discovery Solicitation request. |
| 25033 | 核心网络 - 反向邻居发现请求(ICMPv6-In) |
Core Networking - Inverse Neighbor Discovery Solicitation (ICMPv6-In) |
| 25034 | 核心网络 - 反向邻居发现请求(ICMPv6-Out) |
Core Networking - Inverse Neighbor Discovery Solicitation (ICMPv6-Out) |
| 25039 | “反向邻居发现请求”由节点发送，用于发现给出其链路层地址的其他 IPv6 节点的 IP 地址。 |
Inverse Neighbor Discovery Solicitations are sent by nodes to discover the IP address of another IPv6 node given its link-layer address. |
| 25040 | 核心网络 - 反向邻居发现播发(ICMPv6-In) |
Core Networking - Inverse Neighbor Discovery Advertisement (ICMPv6-In) |
| 25041 | 核心网络 - 反向邻居发现播发(ICMPv6-Out) |
Core Networking - Inverse Neighbor Discovery Advertisement (ICMPv6-Out) |
| 25046 | “反向邻居发现请求”由节点发送，用于通知其他节点 IP 地址的更改或响应“反向邻居发现请求”请求。 |
Inverse Neighbor Discovery Solicitations are sent by nodes to notify other nodes of IP address changes or in response to an Inverse Neighbor Discovery Solicitation request. |
| 25047 | 核心网络 - 证书路径请求(ICMPv6-In) |
Core Networking - Certificate Path Solicitation (ICMPv6-In) |
| 25048 | 核心网络 - 证书路径请求(ICMPv6-Out) |
Core Networking - Certificate Path Solicitation (ICMPv6-Out) |
| 25053 | 发送 - 安全邻居发现 - 证书路径请求是邻居发现请求的安全版本。 |
SEND - Secure Neighbor Discovery - Certificate Path Solicitation is a secure version of Neighbor Discovery Solicitation. |
| 25054 | 核心网络 - 证书路径播发(ICMPv6-In) |
Core Networking - Certificate Path Advertisement (ICMPv6-In) |
| 25055 | 核心网络 - 证书路径播发(ICMPv6-Out) |
Core Networking - Certificate Path Advertisement (ICMPv6-Out) |
| 25060 | 发送 - 安全邻居发现 - 证书路径广告是邻居发现广告的安全版本。 |
SEND - Secure Neighbor Discovery - Certificate Path Advertisement is a secure version of Neighbor Discovery Advertisement. |
| 25061 | 核心网络 - 多播侦听程序查询(ICMPv6-In) |
Core Networking - Multicast Listener Query (ICMPv6-In) |
| 25062 | 核心网络 - 多播侦听程序查询(ICMPv6-Out) |
Core Networking - Multicast Listener Query (ICMPv6-Out) |
| 25067 | 支持 IPv6 多播的路由器使用“多播侦听程序查询”消息查询具有多播组成员身份的链路。 |
An IPv6 multicast-capable router uses the Multicast Listener Query message to query a link for multicast group membership. |
| 25068 | 核心网络 - 多播侦听程序报告(ICMPv6-In) |
Core Networking - Multicast Listener Report (ICMPv6-In) |
| 25069 | 核心网络 - 多播侦听程序报告(ICMPv6-Out) |
Core Networking - Multicast Listener Report (ICMPv6-Out) |
| 25074 | 侦听节点使用“多播侦听程序报告”消息立即报告其对在特定多播地址接收的多播通信的兴趣或响应多播侦听程序查询。 |
The Multicast Listener Report message is used by a listening node to either immediately report its interest in receiving multicast traffic at a specific multicast address or in response to a Multicast Listener Query. |
| 25075 | 核心网络 - 多播侦听程序报告 v2 (ICMPv6-In) |
Core Networking - Multicast Listener Report v2 (ICMPv6-In) |
| 25076 | 核心网络 - 多播侦听程序报告 v2 (ICMPv6-Out) |
Core Networking - Multicast Listener Report v2 (ICMPv6-Out) |
| 25081 | 侦听节点使用多播侦听程序报告 v2 消息或者立即报告其对在特定多播地址接收多播通信的兴趣，或者响应多播侦听程序查询。 |
Multicast Listener Report v2 message is used by a listening node to either immediately report its interest in receiving multicast traffic at a specific multicast address or in response to a Multicast Listener Query. |
| 25082 | 核心网络 - 多播侦听程序完成(ICMPv6-In) |
Core Networking - Multicast Listener Done (ICMPv6-In) |
| 25083 | 核心程序 - 多播侦听程序完成(ICMPv6-Out) |
Core Networking - Multicast Listener Done (ICMPv6-Out) |
| 25088 | “多播侦听程序完成”消息用于通知本地路由器子网上不再有特定多播地址的任何成员。 |
Multicast Listener Done messages inform local routers that there are no longer any members remaining for a specific multicast address on the subnet. |
| 25089 | 核心网络 - 多播路由器播发(ICMPv6-In) |
Core Networking - Multicast Router Advertisement (ICMPv6-In) |
| 25090 | 核心网络 - 多播路由器播发(ICMPv6-Out) |
Core Networking - Multicast Router Advertisement (ICMPv6-Out) |
| 25095 | “多播路由器播发”消息由路由器发送，用于广播 IP 多播转发已启用。 |
Multicast Router Advertisement messages are sent by routers to advertise that IP multicast forwarding is enabled. |
| 25096 | 核心网络 - 多播路由器请求(ICMPv6-In) |
Core Networking - Multicast Router Solicitation (ICMPv6-In) |
| 25097 | 核心网络 - 多播路由器请求(ICMPv6-Out) |
Core Networking - Multicast Router Solicitation (ICMPv6-Out) |
| 25102 | 发送“多播路由器请求”消息，以便发现启用了 IP 多播转发的路由器。 |
Multicast Router Solicitation messages are sent in order to discover routers with IP multicast forwarding enabled. |
| 25103 | 核心网络 - 多播路由器终止(ICMPv6-In) |
Core Networking - Multicast Router Termination (ICMPv6-In) |
| 25104 | 核心网络 - 多播路由器终止(ICMPv6-Out) |
Core Networking - Multicast Router Termination (ICMPv6-Out) |
| 25109 | 当路由器停止某个接口上的 IP 多播路由功能时，会发送“多播路由器终止”消息。 |
Multicast Router Termination messages are sent when a router stops IP multicast routing functions on an interface. |
| 25110 | 核心网络 - 目标不可访问(ICMPv6-In) |
Core Networking - Destination Unreachable (ICMPv6-In) |
| 25111 | 核心网络 - 目标不可访问(ICMPv6-Out) |
Core Networking - Destination Unreachable (ICMPv6-Out) |
| 25112 | 当数据包通过任意节点时，由于除拥塞以外的任何原因导致该节点无法转发数据包时，该节点将发送“目标不可达”错误消息。 |
Destination Unreachable error messages are sent from any node that a packet traverses which is unable to forward the packet for any reason except congestion. |
| 25113 | 核心网络 - 超时(ICMPv6-In) |
Core Networking - Time Exceeded (ICMPv6-In) |
| 25114 | 核心网络 - 超时(ICMPv6-Out) |
Core Networking - Time Exceeded (ICMPv6-Out) |
| 25115 | 当数据包通过任意节点时，如果路径上任意点的“跃点限制”值减少为零，则该节点将生成“超时”错误消息。 |
Time Exceeded error messages are generated from any node that a packet traverses if the Hop Limit value is decremented to zero at any point on the path. |
| 25116 | 核心网络 - 参数问题(ICMPv6-In) |
Core Networking - Parameter Problem (ICMPv6-In) |
| 25117 | 核心网络 - 参数问题(ICMPv6-Out) |
Core Networking - Parameter Problem (ICMPv6-Out) |
| 25118 | “参数问题”错误消息由节点发送，作为错误生成的数据包的结果。 |
Parameter Problem error messages are sent by nodes as a result of incorrectly generated packets. |
| 25251 | 核心网络 - 需要目标不可访问的碎片(ICMPv4-In) |
Core Networking - Destination Unreachable Fragmentation Needed (ICMPv4-In) |
| 25252 | 核心网络 - 需要目标不可访问的碎片(ICMPv4-Out) |
Core Networking - Destination Unreachable Fragmentation Needed (ICMPv4-Out) |
| 25257 | 当数据包通过任意节点时，由于需要碎片但却未设置碎片位导致该节点无法转发数据包时，该节点将发送“需要目标不可达碎片”错误消息。 |
Destination Unreachable Fragmentation Needed error messages are sent from any node that a packet traverses which is unable to forward the packet because fragmentation was needed and the don’t fragment bit was set. |
| 25301 | 核心网络 - 动态主机配置协议(DHCP-In) |
Core Networking - Dynamic Host Configuration Protocol (DHCP-In) |
| 25302 | 核心网络 - 动态主机配置协议(DHCP-Out) |
Core Networking - Dynamic Host Configuration Protocol (DHCP-Out) |
| 25303 | 允许 DHCP (动态主机配置协议)消息用于状态自动配置。 |
Allows DHCP (Dynamic Host Configuration Protocol) messages for stateful auto-configuration. |
| 25304 | 核心网络 - IPv6 的动态主机配置协议(DHCPV6-In) |
Core Networking - Dynamic Host Configuration Protocol for IPv6(DHCPV6-In) |
| 25305 | 核心网络 - IPv6 的动态主机配置协议(DHCPV6-Out) |
Core Networking - Dynamic Host Configuration Protocol for IPv6(DHCPV6-Out) |
| 25306 | 允许 DHCPV6 (IPv6 的动态主机配置协议)消息进行有状态和无状态配置。 |
Allows DHCPV6 (Dynamic Host Configuration Protocol for IPv6) messages for stateful and stateless configuration. |
| 25326 | 核心网络 - Teredo (UDP-In) |
Core Networking - Teredo (UDP-In) |
| 25327 | 核心网络 - Teredo (UDP-Out) |
Core Networking - Teredo (UDP-Out) |
| 25332 | 用于允许 Teredo 边缘遍历(一种在 IPv6/IPv4 主机位于 IPv4 网络地址转换器之后时为单播 IPv6 通信提供地址分配和自动隧道的技术)的入站 UDP 规则。 |
Inbound UDP rule to allow Teredo edge traversal, a technology that provides address assignment and automatic tunneling for unicast IPv6 traffic when an IPv6/IPv4 host is located behind an IPv4 network address translator. |
| 25333 | 用于允许 Teredo 边缘遍历(一种在 IPv6/IPv4 主机位于 IPv4 网络地址转换器之后时为单播 IPv6 通信提供地址分配和自动隧道的技术)的出站 UDP 规则。 |
Outbound UDP rule to allow Teredo edge traversal, a technology that provides address assignment and automatic tunneling for unicast IPv6 traffic when an IPv6/IPv4 host is located behind an IPv4 network address translator. |
| 25351 | 核心网络 - IPv6 (IPv6-In) |
Core Networking - IPv6 (IPv6-In) |
| 25352 | 核心网络 - IPv6 (IPv6-Out) |
Core Networking - IPv6 (IPv6-Out) |
| 25357 | 允许 ISATAP (站内自动隧道寻址协议)的 IPv6 通信和 6to4 隧道服务所需的入站规则。 |
Inbound rule required to permit IPv6 traffic for ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) and 6to4 tunneling services. |
| 25358 | 允许 ISATAP (站内自动隧道寻址协议)的 IPv6 通信和 6to4 隧道服务所需的出站规则。 |
Outbound rule required to permit IPv6 traffic for ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) and 6to4 tunneling services. |
| 25376 | 核心网络 - Internet 组管理协议(IGMP-In) |
Core Networking - Internet Group Management Protocol (IGMP-In) |
| 25377 | 核心网络 - Internet 组管理协议(IGMP-Out) |
Core Networking - Internet Group Management Protocol (IGMP-Out) |
| 25382 | IGMP 消息由节点发送和接收，用于创建、加入和脱离多播组。 |
IGMP messages are sent and received by nodes to create, join and depart multicast groups. |
| 25401 | 核心网络 – 组策略(NP-Out) |
Core Networking - Group Policy (NP-Out) |
| 25402 | 用于允许组策略更新的 SMB 通信的出站规则。[TCP 445] |
Outbound rule to allow SMB traffic for Group Policy updates. [TCP 445] |
| 25403 | 核心网络 – 组策略(TCP-Out) |
Core Networking - Group Policy (TCP-Out) |
| 25404 | 用于允许组策略更新的远程 RPC 通信的出站规则。[TCP] |
Outbound rule to allow remote RPC traffic for Group Policy updates. [TCP] |
| 25405 | 核心网络 – DNS (UDP-Out) |
Core Networking - DNS (UDP-Out) |
| 25406 | 允许 DNS 通信请求的出站规则。无论源地址如何，将允许基于匹配此规则请求的 DNS 响应。此行为被分类为松散的源映射。[UDP 53] |
Outbound rule to allow DNS requests. DNS responses based on requests that matched this rule will be permitted regardless of source address. This behavior is classified as loose source mapping. [LSM] [UDP 53] |
| 25407 | 核心网络 - 组策略(LSASS-Out) |
Core Networking - Group Policy (LSASS-Out) |
| 25408 | 允许组策略更新的远程 LSASS 通信的出站规则 [TCP]。 |
Outbound rule to allow remote LSASS traffic for Group Policy updates [TCP]. |
| 25426 | 核心网络 - IPHTTPS (TCP-In) |
Core Networking - IPHTTPS (TCP-In) |
| 25427 | 核心网络 - IPHTTPS (TCP-Out) |
Core Networking - IPHTTPS (TCP-Out) |
| 25428 | 允许 IPHTTPS 隧道技术跨 HTTP 代理和防火墙提供连接的入站 TCP 规则。 |
Inbound TCP rule to allow IPHTTPS tunneling technology to provide connectivity across HTTP proxies and firewalls. |
| 25429 | 允许 IPHTTPS 隧道技术跨 HTTP 代理和防火墙提供连接的出站 TCP 规则。 |
Outbound TCP rule to allow IPHTTPS tunneling technology to provide connectivity across HTTP proxies and firewalls. |
| 26008 | 网络 - 目标不可访问(ICMPv4-In) |
Networking - Destination Unreachable (ICMPv4-In) |
| 26009 | 网络 - 目标不可访问(ICMPv4-Out) |
Networking - Destination Unreachable (ICMPv4-Out) |
| 26015 | 网络 - 源抑制(ICMPv4-In) |
Networking - Source Quench (ICMPv4-In) |
| 26016 | 网络 - 源抑制(ICMPv4-Out) |
Networking - Source Quench (ICMPv4-Out) |
| 26021 | 从由于数据报接收过快或存在缓冲问题而将其丢弃的数据包所穿过的任意节点发送源抑制消息。 |
Source Quench messages are sent from any node that a packet traverses which discards the datagram because they are arriving too fast or there are buffering issues. |
| 26022 | 网络 - 重定向(ICMPv4-In) |
Networking - Redirect (ICMPv4-In) |
| 26023 | 网络 - 重定向(ICMPv4-Out) |
Networking - Redirect (ICMPv4-Out) |
| 26028 | 发送“重定向”消息是为了表明数据包要发送到的节点不再是到达所讨论网络的最佳网关。 |
Redirect messages are sent to indicate that the node which the packet was sent to is no longer the best gateway to reach the network in question. |
| 26036 | 网络 - 超时(ICMPv4-In) |
Networking - Time Exceeded (ICMPv4-In) |
| 26037 | 网络 - 超时(ICMPv4-Out) |
Networking - Time Exceeded (ICMPv4-Out) |
| 26043 | 网络 - 时间戳请求(ICMPv4-In) |
Networking - Timestamp Request (ICMPv4-In) |
| 26044 | 网络 - 时间戳请求(ICMPv4-Out) |
Networking - Timestamp Request (ICMPv4-Out) |
| 26049 | “时间戳请求”消息由希望获取其他节点的当前时间戳的节点发送。 |
Timestamp Request messages are sent by nodes who wish to obtain the current timestamp from another node. |
| 26057 | 网络 - 参数问题(ICMPv4-In) |
Networking - Parameter Problem (ICMPv4-In) |
| 26058 | 网络 - 参数问题(ICMPv4-Out) |
Networking - Parameter Problem (ICMPv4-Out) |
| 26078 | 网络 - 重定向(ICMPv6-In) |
Networking - Redirect (ICMPv6-In) |
| 26079 | 网络 - 重定向(ICMPv6-Out) |
Networking - Redirect (ICMPv6-Out) |
| 26106 | 网络 - 路由器请求(ICMPv6-In) |
Networking - Router Solicitation (ICMPv6-In) |
| 26117 | 网络 - 基本路由封装(GRE-In) |
Networking - Generic Routing Encapsulation (GRE-In) |
| 26118 | 网络 - 基本路由封装(GRE-Out) |
Networking - Generic Routing Encapsulation (GRE-Out) |
| 26123 | “基本路由封装”用于在一个任意网络层协议上封装其他任意网络层协议。 |
Generic Routing Encapsulation is used for encapsulation of an arbitrary network layer protocol over another arbitrary network layer protocol. |
| 26124 | 网络 - PGM 可靠的传输协议(PGM-In) |
Networking - PGM Reliable Transport Protocol (PGM-In) |
| 26125 | 网络 - PGM 可靠的传输协议(PGM-Out) |
Networking - PGM Reliable Transport Protocol (PGM-Out) |
| 26130 | “实用通用多播”是一个可靠多播传输协议，用于需要从多个源向多个接收方发送有序或无序、复制自由的多播数据的应用程序。 |
Pragmatic General Multicast is a reliable multicast transport protocol used for applications that require ordered or unordered, duplicate-free, multicast data delivery from multiple sources to multiple receivers. |
| 26131 | 网络 - 数据包太大(ICMPv4-In) |
Networking - Packet Too Big (ICMPv4-In) |
| 26132 | 网络 - 数据包太大(ICMPv4-Out) |
Networking - Packet Too Big (ICMPv4-Out) |
| 26134 | 网络 - 路由器请求(ICMPv4-In) |
Networking - Router Solicitation (ICMPv4-In) |
| 26135 | 网络 - 路由器请求(ICMPv4-Out) |
Networking - Router Solicitation (ICMPv4-Out) |
| 26137 | 网络 – 地址掩码请求(ICMPv4-In) |
Networking - Address Mask Request (ICMPv4-In) |
| 26138 | 网络 – 地址掩码请求(ICMPv4-Out) |
Networking - Address Mask Request (ICMPv4-Out) |
| 26139 | “地址掩码请求”消息由希望获得其分配的地址的子网掩码的节点发送。 |
Address Mask Request messages are sent by nodes who wish to obtain the subnet mask for their assigned address. |
| 26140 | 网络 - 回显请求(ICMPv4-In) |
Networking - Echo Request (ICMPv4-In) |
| 26141 | 网络 - 回显请求(ICMPv4-Out) |
Networking - Echo Request (ICMPv4-Out) |
| 26142 | 网络 - 回显请求(ICMPv6-In) |
Networking - Echo Request (ICMPv6-In) |
| 26143 | 网络 - 回显请求(ICMPv6-Out) |
Networking - Echo Request (ICMPv6-Out) |
| 26144 | “回显请求”消息是作为 Ping 请求发送到其他节点的。 |
Echo Request messages are sent as ping requests to other nodes. |
| 28002 | 密钥管理服务 |
Key Management Service |
| 28003 | 密钥管理服务(TCP-In) |
Key Management Service (TCP-In) |
| 28006 | 用于密钥管理服务的入站规则，以允许计算机计算和许可证兼容 [TCP 1688]。 |
Inbound rule for the Key Management Service to allow for machine counting and license compliance. [TCP 1688] |
| 28252 | BITS 对等缓存 |
BITS Peercaching |
| 28254 | BITS 对等缓存(WSD-In) |
BITS Peercaching (WSD-In) |
| 28257 | 通过 WSDAPI 发现有内容的邻居的 BITS 对等缓存的入站规则。[UDP 3702] |
Inbound rule for BITS Peercaching to discover neighbors who may have content via WSDAPI. [UDP 3702] |
| 28258 | BITS 对等缓存(WSD-Out) |
BITS Peercaching (WSD-Out) |
| 28261 | 通过 WSDAPI 发现有内容的邻居的 BITS 对等缓存的出站规则。[UDP 3702] |
Outbound rule for BITS Peercaching to discover neighbors who may have content via WSDAPI. [UDP 3702] |
| 28262 | BITS 对等缓存(Content-In) |
BITS Peercaching (Content-In) |
| 28265 | BITS 对等缓存内容传输端口的入站规则。[TCP 2178] |
Inbound rule for BITS Peercaching content transfer port. [TCP 2178] |
| 28266 | BITS 对等缓存(Content-Out) |
BITS Peercaching (Content-Out) |
| 28269 | BITS 对等缓存内容传输端口的出站规则。[TCP 2178] |
Outbound rule for BITS Peercaching content transfer port. [TCP 2178] |
| 28270 | BITS 对等缓存(RPC) |
BITS Peercaching (RPC) |
| 28273 | 通过动态 RPC/TCP 的对等缓存授权交换端口的入站规则。 |
Inbound rule for the Peercaching authorization exchange port via dynamic RPC/TCP. |
| 28274 | BITS 对等缓存(RPC-EPMAP) |
BITS Peercaching (RPC-EPMAP) |
| 28277 | RPCSS 服务的入站规则用来允许 BITS 对等缓存的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service in order to allow RPC/TCP traffic for BITS Peercaching. |
| 28503 | 文件和打印机共享(NB-Session-In) |
File and Printer Sharing (NB-Session-In) |
| 28506 | 用于文件和打印机共享的入站规则，以允许 NetBIOS 会话服务连接。[TCP 139] |
Inbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139] |
| 28507 | 文件和打印机共享(NB-Session-Out) |
File and Printer Sharing (NB-Session-Out) |
| 28510 | 用于文件和打印机共享的出站规则，以允许 NetBIOS 会话服务连接。[TCP 139] |
Outbound rule for File and Printer Sharing to allow NetBIOS Session Service connections. [TCP 139] |
| 28511 | 文件和打印机共享(SMB-In) |
File and Printer Sharing (SMB-In) |
| 28514 | 用于文件和打印机共享的入站规则，以允许通过命名管道传输和接收服务器消息块。[TCP 445] |
Inbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445] |
| 28515 | 文件和打印机共享(SMB-Out) |
File and Printer Sharing (SMB-Out) |
| 28518 | 用于文件和打印机共享的出站规则，以允许通过命名管道传输和接收服务器消息块。[TCP 445] |
Outbound rule for File and Printer Sharing to allow Server Message Block transmission and reception via Named Pipes. [TCP 445] |
| 28519 | 文件和打印机共享(NB-Name-In) |
File and Printer Sharing (NB-Name-In) |
| 28522 | 用于文件和打印机共享的入站规则，以允许 NetBIOS 名称解析。[UDP 137] |
Inbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137] |
| 28523 | 文件和打印机共享(NB-Name-Out) |
File and Printer Sharing (NB-Name-Out) |
| 28526 | 用于文件和打印机共享的出站规则，以允许 NetBIOS 名称解析。[UDP 137] |
Outbound rule for File and Printer Sharing to allow NetBIOS Name Resolution. [UDP 137] |
| 28527 | 文件和打印机共享(NB-Datagram-In) |
File and Printer Sharing (NB-Datagram-In) |
| 28530 | 用于文件和打印机共享的入站规则，以允许 NetBIOS 数据报传输和接收。[UDP 138] |
Inbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138] |
| 28531 | 文件和打印机共享(NB-Datagram-Out) |
File and Printer Sharing (NB-Datagram-Out) |
| 28534 | 用于文件和打印机共享的出站规则，以允许 NetBIOS 数据报传输和接收。[UDP 138] |
Outbound rule for File and Printer Sharing to allow NetBIOS Datagram transmission and reception. [UDP 138] |
| 28535 | 文件和打印机共享(后台打印程序服务 - RPC) |
File and Printer Sharing (Spooler Service - RPC) |
| 28538 | 用于文件和打印机共享的入站规则，以允许后台打印程序服务通过 TCP/RPC 通信。 |
Inbound rule for File and Printer Sharing to allow the Print Spooler Service to communicate via TCP/RPC. |
| 28539 | 文件和打印机共享(后台打印程序服务 - RPC-EPMAP) |
File and Printer Sharing (Spooler Service - RPC-EPMAP) |
| 28542 | 用于 RPCSS 服务的入站规则，以允许后台打印程序服务的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for the Spooler Service. |
| 28543 | 文件和打印机共享(回显请求 - ICMPv4-In) |
File and Printer Sharing (Echo Request - ICMPv4-In) |
| 28544 | 文件和打印机共享(回显请求 - ICMPv4-Out) |
File and Printer Sharing (Echo Request - ICMPv4-Out) |
| 28545 | 文件和打印机共享(回显请求 - ICMPv6-In) |
File and Printer Sharing (Echo Request - ICMPv6-In) |
| 28546 | 文件和打印机共享(回显请求 - ICMPv6-Out) |
File and Printer Sharing (Echo Request - ICMPv6-Out) |
| 28548 | 文件和打印机共享(LLMNR-UDP-In) |
File and Printer Sharing (LLMNR-UDP-In) |
| 28549 | 用于文件和打印机共享的入站规则，以允许链路本地多播名称解析。[UDP 5355] |
Inbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355] |
| 28550 | 文件和打印机共享(LLMNR-UDP-Out) |
File and Printer Sharing (LLMNR-UDP-Out) |
| 28551 | 用于文件和打印机共享的出站规则，以允许链路本地多播名称解析。[UDP 5355] |
Outbound rule for File and Printer Sharing to allow Link Local Multicast Name Resolution. [UDP 5355] |
| 28602 | SMBDirect 上的文件和打印机共享 |
File and Printer Sharing over SMBDirect |
| 28603 | SMBDirect (iWARP-In)上的文件和打印机共享 |
File and Printer Sharing over SMBDirect (iWARP-In) |
| 28606 | SMBDirect 上的文件和打印机共享允许 iWARP 的入站规则[TCP 5445] |
Inbound rule for File and Printer Sharing over SMBDirect to allow iWARP [TCP 5445] |
| 28753 | 远程桌面(TCP-In) |
Remote Desktop (TCP-In) |
| 28756 | 用于远程桌面服务的入站规则，以允许 RDP 通信。[TCP 3389] |
Inbound rule for the Remote Desktop service to allow RDP traffic. [TCP 3389] |
| 28757 | RemoteApp 和桌面连接管理 - WMI (TCP 入站) |
RemoteApp and Desktop Connection Management - WMI (TCP-In) |
| 28758 | 用于对 RemoteApp 和桌面连接管理进行 WMI 管理的入站规则 |
Inbound rule for WMI management of RemoteApp and Desktop Connection Management |
| 28759 | RemoteApp 和桌面连接管理 - WMI (DCOM 入站) |
RemoteApp and Desktop Connection Management - WMI (DCOM-In) |
| 28760 | 允许对 RemoteApp 和桌面连接管理进行远程 WMI 管理的 DCOM 流量的入站规则。[TCP 135] |
Inbound rule to allow DCOM traffic for remote WMI management of RemoteApp and Desktop Connection Management. [TCP 135] |
| 28761 | RemoteApp 和桌面连接管理 - WMI (TCP 出站) |
RemoteApp and Desktop Connection Management - WMI (TCP-Out) |
| 28762 | 用于对 RemoteApp 和桌面连接管理进行 WMI 管理的出站规则 |
Outbound rule for WMI management of RemoteApp and Desktop Connection Management |
| 28763 | RemoteApp 和桌面连接管理 - WMI (Async-TCP-In) |
RemoteApp and Desktop Connection Management - WMI (Async-TCP-In) |
| 28764 | 对 RemoteApp 和桌面连接管理进行异步 WMI 管理的入站规则 |
Inbound rule for asynchronous WMI management of RemoteApp and Desktop Connection Management |
| 28765 | RemoteApp 和桌面连接管理(RPC) |
RemoteApp and Desktop Connection Management (RPC) |
| 28766 | 允许通过 RPC/TCP 流量远程管理 RemoteApp 和桌面连接管理的入站规则 |
Inbound rule to allow RemoteApp and Desktop Connection Management to be remotely managed via RPC/TCP traffic |
| 28767 | 远程桌面 Web 访问 - WMI (Async-TCP-In) |
Remote Desktop Web Access - WMI (Async-TCP-In) |
| 28768 | 对远程桌面 Web 访问进行异步 WMI 管理的入站规则 |
Inbound rule for asynchronous WMI management of Remote Desktop Web Access |
| 28769 | 远程桌面 Web 访问 - WMI (DCOM-In) |
Remote Desktop Web Access - WMI (DCOM-In) |
| 28770 | 允许 DCOM 流量用于对远程桌面 Web 访问进行远程 WMI 管理的入站规则 |
Inbound rule to allow DCOM traffic for remote WMI management of Remote Desktop Web Access |
| 28771 | 远程桌面 Web 访问 - WMI (TCP-In) |
Remote Desktop Web Access - WMI (TCP-In) |
| 28772 | 对远程桌面 Web 访问进行 WMI 管理的入站规则 |
Inbound rule for WMI management of Remote Desktop Web Access |
| 28773 | 远程桌面 Web 访问 - WMI (TCP-Out) |
Remote Desktop Web Access - WMI (TCP-Out) |
| 28774 | 对远程桌面 Web 访问进行 WMI 管理的出站规则 |
Outbound rule for WMI management of Remote Desktop Web Access |
| 28775 | 远程桌面 - 用户模式(TCP-In) |
Remote Desktop - User Mode (TCP-In) |
| 28776 | 远程桌面 - 用户模式(UDP-In) |
Remote Desktop - User Mode (UDP-In) |
| 28777 | 远程桌面服务允许 RDP 通信的入站规则。[UDP 3389] |
Inbound rule for the Remote Desktop service to allow RDP traffic. [UDP 3389] |
| 28778 | 远程桌面 - 远程监控(TCP-In) |
Remote Desktop - Shadow (TCP-In) |
| 28779 | 远程桌面服务的入站规则，允许对现有远程桌面会话进行远程监控。(TCP-In) |
Inbound rule for the Remote Desktop service to allow shadowing of an existing Remote Desktop session. (TCP-In) |
| 29002 | iSCSI 服务 |
iSCSI Service |
| 29003 | iSCSI 服务(TCP-In) |
iSCSI Service (TCP-In) |
| 29006 | 用于 iSCSI 服务的入站规则，以允许与 iSCSI 服务器或设备通信。[TCP] |
Inbound rule for the iSCSI Service to allow communications with an iSCSI server or device. [TCP] |
| 29007 | iSCSI 服务(TCP-Out) |
iSCSI Service (TCP-Out) |
| 29010 | 用于 iSCSI 服务的出站规则，以允许与 iSCSI 服务器或设备通信。[TCP] |
Outbound rule for the iSCSI Service to allow communications with an iSCSI server or device. [TCP] |
| 29252 | 远程事件日志管理 |
Remote Event Log Management |
| 29253 | 远程事件日志管理(RPC) |
Remote Event Log Management (RPC) |
| 29256 | 用于要通过 RPC/TCP 被远程管理的本地事件日志服务的入站规则。 |
Inbound rule for the local Event Log service to be remotely managed via RPC/TCP. |
| 29257 | 远程事件日志管理(NP-In) |
Remote Event Log Management (NP-In) |
| 29260 | 用于要通过命名管道被远程管理的本地事件日志服务的入站规则。 |
Inbound rule for the local Event Log service to be remotely managed over Named Pipes. |
| 29265 | 远程事件日志管理(RPC-EPMAP) |
Remote Event Log Management (RPC-EPMAP) |
| 29268 | 用于 RPCSS 服务的入站规则，以允许本地事件日志服务的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for the local Event Log Service. |
| 29502 | 远程服务管理 |
Remote Service Management |
| 29503 | 远程服务管理(RPC) |
Remote Service Management (RPC) |
| 29506 | 用于要通过 RPC/TCP 被远程管理的本地服务控制管理器的入站规则。 |
Inbound rule for the local Service Control Manager to be remotely managed via RPC/TCP. |
| 29507 | 远程服务管理(NP-In) |
Remote Service Management (NP-In) |
| 29510 | 用于要通过命名管道被远程管理的本地服务控制管理器的入站规则。 |
Inbound rule for the local Service Control Manager to be remotely managed over Named Pipes. |
| 29515 | 远程服务管理(RPC-EPMAP) |
Remote Service Management (RPC-EPMAP) |
| 29518 | 用于 RPCSS 服务的入站规则，以允许本地服务控制管理器的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for the local Service Control Manager. |
| 29752 | 远程管理 |
Remote Administration |
| 29753 | 远程管理(RPC) |
Remote Administration (RPC) |
| 29756 | 用于要通过 RPC/TCP 被远程管理的所有服务的入站规则。 |
Inbound rule for all services to be remotely managed via RPC/TCP. |
| 29757 | 远程管理(NP-In) |
Remote Administration (NP-In) |
| 29760 | 用于要通过命名管道被远程管理的所有服务的入站规则。 |
Inbound rule for all services to be remotely managed over Named Pipes. |
| 29765 | 远程管理(RPC-EPMAP) |
Remote Administration (RPC-EPMAP) |
| 29768 | 用于 RPCSS 服务的入站规则，以允许所有本地服务的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for all the local services. |
| 30002 | Windows 防火墙远程管理 |
Windows Firewall Remote Management |
| 30003 | Windows 防火墙远程管理(RPC) |
Windows Firewall Remote Management (RPC) |
| 30006 | 用于要通过 RPC/TCP 被远程管理的 Windows 防火墙的入站规则。 |
Inbound rule for the Windows Firewall to be remotely managed via RPC/TCP. |
| 30007 | Windows 防火墙远程管理(RPC-EPMAP) |
Windows Firewall Remote Management (RPC-EPMAP) |
| 30010 | 用于 RPCSS 服务的入站规则，以允许 Windows 防火墙的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for the Windows Firewall. |
| 30252 | Windows 远程管理(兼容性) |
Windows Remote Management (Compatibility) |
| 30253 | Windows 远程管理(HTTP-In) |
Windows Remote Management (HTTP-In) |
| 30256 | 通过 WS-Management 实现的 Windows 远程管理的入站规则。[TCP 5985] |
Inbound rule for Windows Remote Management via WS-Management. [TCP 5985] |
| 30267 | Windows 远程管理 |
Windows Remote Management |
| 30502 | 无线便携设备 |
Wireless Portable Devices |
| 30503 | 无线便携式设备(TCP-Out) |
Wireless Portable Devices (TCP-Out) |
| 30506 | 用于无线便携式设备的出站规则，以允许使用用户模式驱动程序框架。[TCP] |
Outbound rule for Wireless Portable Devices to allow use of the Usermode Driver Framework. [TCP] |
| 30507 | 无线便携式设备(SSDP-In) |
Wireless Portable Devices (SSDP-In) |
| 30510 | 用于无线便携式设备的入站规则，以允许使用简单服务发现协议。[UDP 1900] |
Inbound rule for Wireless Portable Devices to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 30511 | 无线便携式设备(SSDP-Out) |
Wireless Portable Devices (SSDP-Out) |
| 30514 | 用于无线便携式设备的出站规则，以允许使用简单服务发现协议。[UDP 1900] |
Outbound rule for Wireless Portable Devices to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 30515 | 无线便携式设备(UPnP-In) |
Wireless Portable Devices (UPnP-In) |
| 30518 | 用于无线便携式设备的入站规则，以允许使用通用即插即用设备。[TCP 2869] |
Inbound rule for Wireless Portable Devices to allow use of Universal Plug and Play. [TCP 2869] |
| 30519 | 无线便携式设备(UPnP-Out) |
Wireless Portable Devices (UPnP-Out) |
| 30522 | 用于无线便携式设备的出站规则，以允许使用通用即插即用设备。[TCP] |
Outbound rule for Wireless Portable Devices to allow use of Universal Plug and Play. [TCP] |
| 30523 | 无线便携式设备(UPnPHost-Out) |
Wireless Portable Devices (UPnPHost-Out) |
| 30752 | Media Center 扩展器 |
Media Center Extenders |
| 30753 | Media Center 扩展器 - SSDP (UDP-In) |
Media Center Extenders - SSDP (UDP-In) |
| 30756 | 用于 Media Center 扩展器的入站规则，以允许使用简单服务发现协议。[UDP 1900] |
Inbound rule for Media Center Extenders to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 30757 | Media Center 扩展器 - SSDP (UDP-Out) |
Media Center Extenders - SSDP (UDP-Out) |
| 30760 | 用于 Media Center 扩展器的出站规则，以允许使用简单服务发现协议。[UDP 1900] |
Outbound rule for Media Center Extenders to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 30761 | Media Center 扩展器 - RTSP (TCP-In) |
Media Center Extenders - RTSP (TCP-In) |
| 30764 | 用于允许 RTSP AV 控制的 Media Center 扩展器的入站规则。[TCP 554, TCP 8554-8558] |
Inbound rule for Media Center Extenders to allow RTSP AV Control. [TCP 554, TCP 8554-8558] |
| 30765 | Media Center 扩展器 - RTSP (TCP-Out) |
Media Center Extenders - RTSP (TCP-Out) |
| 30768 | 用于允许 WMDRM-ND 和 RTSP AV 控制的 Media Center 扩展器的出站规则。[TCP] |
Outbound rule for Media Center Extenders to allow WMDRM-ND and RTSP AV Control. [TCP] |
| 30769 | Media Center 扩展器 - qWave (UDP-In) |
Media Center Extenders - qWave (UDP-In) |
| 30772 | 用于 Media Center 扩展器的入站规则，以允许使用优质 Windows 音频视频体验服务。[UDP 2177] |
Inbound rule for Media Center Extenders to allow use of the Quality Windows Audio Video Experience Service. [UDP 2177] |
| 30773 | Media Center 扩展器 - qWave (UDP-Out) |
Media Center Extenders - qWave (UDP-Out) |
| 30776 | 用于 Media Center 扩展器的出站规则，以允许使用优质 Windows 音频视频体验服务。[UDP 2177] |
Outbound rule for Media Center Extenders to allow use of the Quality Windows Audio Video Experience Service. [UDP 2177] |
| 30777 | Media Center 扩展器 - qWave (TCP-In) |
Media Center Extenders - qWave (TCP-In) |
| 30780 | 用于 Media Center 扩展器的入站规则，以允许使用优质 Windows 音频视频体验服务。[TCP 2177] |
Inbound rule for Media Center Extenders to allow use of the Quality Windows Audio Video Experience Service. [TCP 2177] |
| 30781 | Media Center 扩展器 - qWave (TCP-Out) |
Media Center Extenders - qWave (TCP-Out) |
| 30784 | 用于 Media Center 扩展器的出站规则，以允许使用优质 Windows 音频视频体验服务。[TCP 2177] |
Outbound rule for Media Center Extenders to allow use of the Quality Windows Audio Video Experience Service. [TCP 2177] |
| 30785 | Media Center 扩展器 - HTTP 流(TCP-In) |
Media Center Extenders - HTTP Streaming (TCP-In) |
| 30788 | 用于 Media Center 扩展器的入站规则，以允许 HTTP 媒体流。[TCP 10244] |
Inbound rule for Media Center Extenders to allow HTTP Media Streaming. [TCP 10244] |
| 30793 | Media Center 扩展器 - XSP (TCP-In) |
Media Center Extenders - XSP (TCP-In) |
| 30796 | 用于 Media Center 扩展器的入站规则，以允许终端会话。[TCP 3390] |
Inbound rule for Media Center Extenders to allow terminal sessions. [TCP 3390] |
| 30801 | Media Center 扩展器 - WMDRM-ND/RTP/RTCP (UDP-In) |
Media Center Extenders - WMDRM-ND/RTP/RTCP (UDP-In) |
| 30804 | Media Center 扩展器允许 WMDRM-ND 和 RTP/RTCP AV 流的入站规则。[UDP 7777-7781、UDP 5004-5005、UDP 50004-50013] |
Inbound rule for Media Center Extenders to allow WMDRM-ND and RTP/RTCP AV Streaming. [UDP 7777-7781, UDP 5004-5005, UDP 50004-50013] |
| 30805 | Media Center 扩展器 - WMDRM-ND/RTP/RTCP (UDP-Out) |
Media Center Extenders - WMDRM-ND/RTP/RTCP (UDP-Out) |
| 30808 | 用于允许 WMDRM-ND 和 RTP/RTCP AV 流的 Media Center 扩展器的出站规则。[UDP] |
Outbound rule for Media Center Extenders to allow WMDRM-ND and RTP/RTCP AV Streaming. [UDP] |
| 30810 | Media Center 扩展器 - 服务(TCP-Out) |
Media Center Extenders - Service (TCP-Out) |
| 30811 | 允许扩展器设备查找并连接到计算机的 Media Center 扩展器输出规则。 [TCP] |
Outbound rule for Media Center Extenders to allow extender devices to locate and connect to the computer. [TCP] |
| 30812 | Media Center 扩展器 - 设备配置(TCP-Out) |
Media Center Extenders - Device Provisioning (TCP-Out) |
| 30813 | Media Center 扩展器允许设备配置通信的出站规则。[TCP] |
Outbound rule for Media Center Extenders to allow traffic for Device Provisioning. [TCP] |
| 30814 | Media Center 扩展器 - 媒体流(TCP-In) |
Media Center Extenders - Media Streaming (TCP-In) |
| 30815 | Media Center 扩展器允许媒体流的 UPnP 通信的入站规则。[TCP 2869] |
Inbound rule for Media Center Extenders to allow UPnP traffic for Media Streaming. [TCP 2869] |
| 30816 | Media Center 扩展器 - 媒体流(TCP-Out) |
Media Center Extenders - Media Streaming (TCP-Out) |
| 30817 | Media Center 扩展器允许媒体流的 UPnP 通信的出站规则。[TCP] |
Outbound rule for Media Center Extenders to allow UPnP traffic for Media Streaming. [TCP] |
| 30818 | Media Center 扩展器 - 设备验证(TCP-Out) |
Media Center Extenders - Device Validation (TCP-Out) |
| 30819 | Media Center 扩展器允许设备验证的通信的出站规则。[TCP] |
Outbound rule for Media Center Extenders to allow traffic for Device Validation. [TCP] |
| 30820 | Media Center 扩展器 - 媒体流(UDP-Out) |
Media Center Extenders - Media Streaming (UDP-Out) |
| 30821 | Media Center 扩展器允许媒体流设备响应 SSDP 搜索的出站规则。[UDP 1900] |
Outbound rule for Media Center Extenders to allow Media Streaming devices to respond to an SSDP search. [UDP 1900] |
| 30822 | Media Center 扩展器 - UPnP (TCP-Out) |
Media Center Extenders - UPnP (TCP-Out) |
| 30823 | Media Center 扩展器允许 UPnP 设备传送设备信息的出站规则。[TCP] |
Outbound rule for Media Center Extenders to allow UPnP devices to transmit device information. [TCP] |
| 31002 | Windows Media Player |
Windows Media Player |
| 31003 | Windows Media Player (UDP-In) |
Windows Media Player (UDP-In) |
| 31006 | 用于 Windows Media Player 的入站规则，以允许 UDP 媒体流。[UDP] |
Inbound rule for Windows Media Player to allow UDP Media Streaming. [UDP] |
| 31007 | Windows Media Player (UDP-Out) |
Windows Media Player (UDP-Out) |
| 31010 | 用于 Windows Media Player 的出站规则，以允许 UDP 媒体流。[UDP] |
Outbound rule for Windows Media Player to allow UDP Media Streaming. [UDP] |
| 31011 | Windows Media Player (TCP-Out) |
Windows Media Player (TCP-Out) |
| 31014 | 用于 Windows Media Player 的出站规则，以允许 TCP/HTTP 媒体流。[TCP] |
Outbound rule for Windows Media Player to allow TCP/HTTP Media Streaming. [TCP] |
| 31015 | Windows Media Player - Internet 组管理协议(IGMP-In) |
Windows Media Player - Internet Group Management Protocol (IGMP-In) |
| 31018 | 用于 Windows Media Player 的入站规则，以允许 IGMP 消息。 |
Inbound rule for Windows Media Player to allow IGMP messages. |
| 31019 | Windows Media Player - Internet 组管理协议(IGMP-Out) |
Windows Media Player - Internet Group Management Protocol (IGMP-Out) |
| 31022 | 用于 Windows Media Player 的出站规则，以允许 IGMP 消息。 |
Outbound rule for Windows Media Player to allow IGMP messages. |
| 31023 | Windows Media Player x86 (UDP-In) |
Windows Media Player x86 (UDP-In) |
| 31024 | Windows Media Player x86 (UDP-Out) |
Windows Media Player x86 (UDP-Out) |
| 31025 | Windows Media Player x86 (TCP-Out) |
Windows Media Player x86 (TCP-Out) |
| 31252 | Windows Media Player 网络共享服务 |
Windows Media Player Network Sharing Service |
| 31253 | Windows Media Player 网络共享服务(qWave-UDP-In) |
Windows Media Player Network Sharing Service (qWave-UDP-In) |
| 31256 | 用于 Windows Media Player 网络共享服务的入站规则，以允许使用优质 Windows 音频视频体验服务。[UDP 2177] |
Inbound rule for the Windows Media Player Network Sharing Service to allow use of the Quality Windows Audio Video Experience Service. [UDP 2177] |
| 31257 | Windows Media Player 网络共享服务(qWave-UDP-Out) |
Windows Media Player Network Sharing Service (qWave-UDP-Out) |
| 31260 | 用于 Windows Media Player 网络共享服务的出站规则，以允许使用优质 Windows 音频视频体验服务。[UDP 2177] |
Outbound rule for the Windows Media Player Network Sharing Service to allow use of the Quality Windows Audio Video Experience Service. [UDP 2177] |
| 31261 | Windows Media Player 网络共享服务(qWave-TCP-In) |
Windows Media Player Network Sharing Service (qWave-TCP-In) |
| 31264 | 用于 Windows Media Player 网络共享服务的入站规则，以允许使用优质 Windows 音频视频体验服务。[TCP 2177] |
Inbound rule for the Windows Media Player Network Sharing Service to allow use of the Quality Windows Audio Video Experience Service. [TCP 2177] |
| 31265 | Windows Media Player 网络共享服务(qWave-TCP-Out) |
Windows Media Player Network Sharing Service (qWave-TCP-Out) |
| 31268 | 用于 Windows Media Player 网络共享服务的出站规则，以允许使用优质Windows 音频视频体验服务。[TCP 2177] |
Outbound rule for the Windows Media Player Network Sharing Service to allow use of the Quality Windows Audio Video Experience Service. [TCP 2177] |
| 31269 | Windows Media Player 网络共享服务(SSDP-In) |
Windows Media Player Network Sharing Service (SSDP-In) |
| 31272 | 用于 Windows Media Player 网络共享服务的入站规则，以允许使用简单服务发现协议。[UDP 1900] |
Inbound rule for the Windows Media Player Network Sharing Service to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 31273 | Windows Media Player 网络共享服务(SSDP-Out) |
Windows Media Player Network Sharing Service (SSDP-Out) |
| 31276 | 用于 Windows Media Player 网络共享服务的出站规则，以允许使用简单服务发现协议。[UDP 1900] |
Outbound rule for the Windows Media Player Network Sharing Service to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 31277 | Windows Media Player 网络共享服务(UPnP-In) |
Windows Media Player Network Sharing Service (UPnP-In) |
| 31280 | 用于 Windows Media Player 网络共享服务的入站规则，以允许使用通用即插即用设备。[TCP 2869] |
Inbound rule for the Windows Media Player Network Sharing Service to allow use of Universal Plug and Play. [TCP 2869] |
| 31281 | Windows Media Player 网络共享服务(UPnP-Out) |
Windows Media Player Network Sharing Service (UPnP-Out) |
| 31284 | 用于 Windows Media Player 网络共享服务的出站规则，以允许使用通用即插即用设备。[TCP] |
Outbound rule for the Windows Media Player Network Sharing Service to allow use of Universal Plug and Play. [TCP] |
| 31285 | Windows Media Player 网络共享服务(HTTP-Streaming-In) |
Windows Media Player Network Sharing Service (HTTP-Streaming-In) |
| 31288 | 用于 Windows Media Player 网络共享服务的入站规则，以允许 HTTP 媒体流。[TCP 10243] |
Inbound rule for the Windows Media Player Network Sharing Service to allow HTTP Media Streaming. [TCP 10243] |
| 31289 | Windows Media Player 网络共享服务(HTTP-Streaming-Out) |
Windows Media Player Network Sharing Service (HTTP-Streaming-Out) |
| 31292 | 用于 Windows Media Player 网络共享服务的出站规则，以允许 HTTP 媒体流。[TCP 10243] |
Outbound rule for the Windows Media Player Network Sharing Service to allow HTTP Media Streaming. [TCP 10243] |
| 31293 | Windows Media Player 网络共享服务(Streaming-UDP-In) |
Windows Media Player Network Sharing Service (Streaming-UDP-In) |
| 31297 | Windows Media Player 网络共享服务(Streaming-UDP-Out) |
Windows Media Player Network Sharing Service (Streaming-UDP-Out) |
| 31301 | Windows Media Player 网络共享服务(Streaming-TCP-Out) |
Windows Media Player Network Sharing Service (Streaming-TCP-Out) |
| 31305 | Windows Media Player 网络共享服务(UDP-In) |
Windows Media Player Network Sharing Service (UDP-In) |
| 31308 | 用于 Windows Media Player 网络共享服务的入站规则，以允许共享通信。[UDP] |
Inbound rule for the Windows Media Player Network Sharing Service to allow sharing traffic. [UDP] |
| 31309 | Windows Media Player 网络共享服务(UDP-Out) |
Windows Media Player Network Sharing Service (UDP-Out) |
| 31312 | 用于 Windows Media Player 网络共享服务的出站规则，以允许共享通信。[UDP] |
Outbound rule for the Windows Media Player Network Sharing Service to allow sharing traffic. [UDP] |
| 31313 | Windows Media Player 网络共享服务(TCP-In) |
Windows Media Player Network Sharing Service (TCP-In) |
| 31316 | 用于 Windows Media Player 网络共享服务的入站规则，以允许共享通信。[TCP] |
Inbound rule for the Windows Media Player Network Sharing Service to allow sharing traffic. [TCP] |
| 31317 | Windows Media Player 网络共享服务(TCP-Out) |
Windows Media Player Network Sharing Service (TCP-Out) |
| 31320 | 用于 Windows Media Player 网络共享服务的出站规则，以允许共享通信。[TCP] |
Outbound rule for the Windows Media Player Network Sharing Service to allow sharing traffic. [TCP] |
| 31321 | Windows Media Player 网络共享服务(UPnPHost-Out) |
Windows Media Player Network Sharing Service (UPnPHost-Out) |
| 31323 | Windows Media Player 网络共享服务 x86 (Streaming-UDP-In) |
Windows Media Player Network Sharing Service x86 (Streaming-UDP-In) |
| 31324 | Windows Media Player 网络共享服务 x86 (Streaming-UDP-Out) |
Windows Media Player Network Sharing Service x86 (Streaming-UDP-Out) |
| 31325 | Windows Media Player 网络共享服务 x86 (Streaming-TCP-Out) |
Windows Media Player Network Sharing Service x86 (Streaming-TCP-Out) |
| 31500 | Windows Media Player 网络共享服务(Internet) |
Windows Media Player Network Sharing Service (Internet) |
| 31502 | 用于 Windows Media Player 网络共享服务的入站规则，以允许 HTTP 媒体流。[TCP 10245] |
Inbound rule for the Windows Media Player Network Sharing Service to allow HTTP Media Streaming. [TCP 10245] |
| 31700 | Windows Media Player 网络共享服务服务强化 - RTSP |
Windows Media Player Network Sharing Service service hardening - RTSP |
| 31701 | 允许到 Windows Media Player 网络共享服务的传入 RTSP 连接 |
Allow incoming RTSP connections to the Windows Media Player Network Sharing Service |
| 31702 | Windows Media Player 网络共享服务服务强化 - 阻止其他任何传入的 TCP 流量 |
Windows Media Player Network Sharing Service service hardening - Block any other incoming TCP traffic |
| 31752 | 连接到网络投影仪 |
Connect to a Network Projector |
| 31753 | 到网络投影仪的连接(WSD-In) |
Connect to a Network Projector (WSD-In) |
| 31756 | 用于到网络投影仪的连接的入站规则，以通过 WSDAPI 发现设备。[UDP 3702] |
Inbound rule for Connect to a Network Projector to discover devices via WSDAPI. [UDP 3702] |
| 31757 | 到网络投影仪的连接(WSD-Out) |
Connect to a Network Projector (WSD-Out) |
| 31760 | 用于到网络投影仪的连接的出站规则，以通过 WSDAPI 发现设备。[UDP 3702] |
Outbound rule for Connect to a Network Projector to discover devices via WSDAPI. [UDP 3702] |
| 31761 | 到网络投影仪的连接(TCP-In) |
Connect to a Network Projector (TCP-In) |
| 31764 | 用于到网络投影仪的连接的入站规则，以与网络上的设备通信。[TCP] |
Inbound rule for Connect to a Network Projector to communicate with devices on the network. [TCP] |
| 31765 | 到网络投影仪的连接(TCP-Out) |
Connect to a Network Projector (TCP-Out) |
| 31768 | 用于到网络投影仪的连接的出站规则，以与网络上的设备通信。[TCP] |
Outbound rule for Connect to a Network Projector to communicate with devices on the network. [TCP] |
| 31769 | 连接到网络投影仪(WSD Events-In) |
Connect to a Network Projector (WSD Events-In) |
| 31770 | 用于允许 WSDAPI 事件发现的连接到网络投影仪的入站规则。[TCP 5357] |
Inbound rule for Connect to a Network Projector to allow WSDAPI Events Discovery. [TCP 5357] |
| 31771 | 连接到网络投影仪(WSD Events-Out) |
Connect to a Network Projector (WSD Events-Out) |
| 31772 | 用于允许 WSDAPI 事件发现的连接到网络投影仪的出站规则。[TCP 5358] |
Outbound rule for Connect to a Network Projector to allow WSDAPI Events Discovery. [TCP 5358] |
| 31773 | 连接到网络投影仪(WSD EventsSecure-In) |
Connect to a Network Projector (WSD EventsSecure-In) |
| 31774 | 用于允许安全 WSDAPI 事件的连接到网络投影仪的入站规则。[TCP 5358] |
Inbound rule for Connect to a Network Projector to allow Secure WSDAPI Events. [TCP 5358] |
| 31775 | 连接到网络投影仪(WSD EventsSecure-Out) |
Connect to a Network Projector (WSD EventsSecure-Out) |
| 31776 | 用于允许安全 WSDAPI 事件的连接到网络投影仪的出站规则。[TCP 5358] |
Outbound rule for Connect to a Network Projector to allow Secure WSDAPI Events. [TCP 5358] |
| 32002 | Windows 对等协作基础 |
Windows Peer to Peer Collaboration Foundation |
| 32003 | Windows 对等协作基础(TCP-In) |
Windows Peer to Peer Collaboration Foundation (TCP-In) |
| 32006 | 用于 Windows 对等协作基础的入站规则，以进行对等通信。[TCP] |
Inbound rule for the Windows Peer to Peer Collaboration Foundation for Peer to Peer Communication. [TCP] |
| 32007 | Windows 对等协作基础(TCP-Out) |
Windows Peer to Peer Collaboration Foundation (TCP-Out) |
| 32010 | 用于 Windows 对等协作基础的出站规则，以进行对等通信。[TCP] |
Outbound rule for the Windows Peer to Peer Collaboration Foundation for Peer to Peer Communication. [TCP] |
| 32011 | Windows 对等协作基础(WSD-In) |
Windows Peer to Peer Collaboration Foundation (WSD-In) |
| 32014 | 用于 Windows 对等协作基础的入站规则，以通过 WSDAPI 发现设备。[UDP 3702] |
Inbound rule for the Windows Peer to Peer Collaboration Foundation to discover devices via WSDAPI. [UDP 3702] |
| 32015 | Windows 对等协作基础(WSD-Out) |
Windows Peer to Peer Collaboration Foundation (WSD-Out) |
| 32018 | 用于 Windows 对等协作基础的出站规则，以通过 WSDAPI 发现设备。[UDP 3702] |
Outbound rule for the Windows Peer to Peer Collaboration Foundation to discover devices via WSDAPI. [UDP 3702] |
| 32019 | Windows 对等协作基础(PNRP-In) |
Windows Peer to Peer Collaboration Foundation (PNRP-In) |
| 32022 | 用于 Windows 对等协作基础的入站规则，以允许对等名称解析。[UDP 3540] |
Inbound rule for the Windows Peer to Peer Collaboration Foundation to allow Peer Name Resolution. [UDP 3540] |
| 32023 | Windows 对等协作基础(PNRP-Out) |
Windows Peer to Peer Collaboration Foundation (PNRP-Out) |
| 32026 | 用于 Windows 对等协作基础的出站规则，以允许对等名称解析。[UDP 3540] |
Outbound rule for the Windows Peer to Peer Collaboration Foundation to allow Peer Name Resolution. [UDP 3540] |
| 32027 | Windows 对等协作基础(SSDP-In) |
Windows Peer to Peer Collaboration Foundation (SSDP-In) |
| 32030 | 用于 Windows 对等协作基础的入站规则，以允许使用简单服务发现协议。[UDP 1900] |
Inbound rule for the Windows Peer to Peer Collaboration Foundation to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 32031 | Windows 对等协作基础(SSDP-Out) |
Windows Peer to Peer Collaboration Foundation (SSDP-Out) |
| 32034 | 用于 Windows 对等协作基础的出站规则，以允许使用简单服务发现协议。[UDP 1900] |
Outbound rule for the Windows Peer to Peer Collaboration Foundation to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 32252 | Windows 会议室 |
Windows Meeting Space |
| 32253 | Windows 会议室(DFSR-In) |
Windows Meeting Space (DFSR-In) |
| 32256 | 用于 Windows 会议室的入站规则，以允许分布式文件系统复制通信。[TCP 5722] |
Inbound rule for Windows Meeting Space to allow Distributed File System Replication traffic. [TCP 5722] |
| 32257 | Windows 会议室(DFSR-Out) |
Windows Meeting Space (DFSR-Out) |
| 32260 | 用于 Windows 会议室的出站规则，以允许分布式文件系统复制通信。[TCP 5722] |
Outbound rule for Windows Meeting Space to allow Distributed File System Replication traffic. [TCP 5722] |
| 32261 | Windows 会议室(TCP-In) |
Windows Meeting Space (TCP-In) |
| 32264 | 用于 Windows 会议室的入站规则，以允许协作通信。[TCP] |
Inbound rule for Windows Meeting Space to allow collaboration traffic. [TCP] |
| 32265 | Windows 会议室(TCP-Out) |
Windows Meeting Space (TCP-Out) |
| 32268 | 用于 Windows 会议室的出站规则，以允许协作通信。[TCP] |
Outbound rule for Windows Meeting Space to allow collaboration traffic. [TCP] |
| 32269 | Windows 会议室(UDP-In) |
Windows Meeting Space (UDP-In) |
| 32272 | 用于 Windows 会议室的入站规则，以允许协作通信。[UDP] |
Inbound rule for Windows Meeting Space to allow collaboration traffic. [UDP] |
| 32273 | Windows 会议室(UDP-Out) |
Windows Meeting Space (UDP-Out) |
| 32276 | 用于 Windows 会议室的出站规则，以允许协作通信。[UDP] |
Outbound rule for Windows Meeting Space to allow collaboration traffic. [UDP] |
| 32277 | Windows 会议室(P2P-In) |
Windows Meeting Space (P2P-In) |
| 32280 | 用于 Windows 会议室的入站规则，以允许对等网络通信。[TCP 3587] |
Inbound rule for Windows Meeting Space to allow Peer Networking traffic. [TCP 3587] |
| 32281 | Windows 会议室(P2P-Out) |
Windows Meeting Space (P2P-Out) |
| 32284 | 用于 Windows 会议室的出站规则，以允许对等网络通信。[TCP 3587] |
Outbound rule for Windows Meeting Space to allow Peer Networking traffic. [TCP 3587] |
| 32752 | 网络发现 |
Network Discovery |
| 32753 | 网络发现(SSDP-In) |
Network Discovery (SSDP-In) |
| 32754 | Teredo 网络发现(SSDP-In) |
Network Discovery for Teredo (SSDP-In) |
| 32756 | 用于网络发现的入站规则，以允许使用简单服务发现协议。[UDP 1900] |
Inbound rule for Network Discovery to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 32757 | 网络发现(SSDP-Out) |
Network Discovery (SSDP-Out) |
| 32760 | 用于网络发现的出站规则，以允许使用简单服务发现协议。[UDP 1900] |
Outbound rule for Network Discovery to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 32761 | 网络发现(UPnP-In) |
Network Discovery (UPnP-In) |
| 32762 | Teredo 网络发现(UPnP-In) |
Network Discovery for Teredo (UPnP-In) |
| 32764 | 用于网络发现的入站规则，以允许使用通用即插即用设备。[TCP 2869] |
Inbound rule for Network Discovery to allow use of Universal Plug and Play. [TCP 2869] |
| 32765 | 网络发现(UPnP-Out) |
Network Discovery (UPnP-Out) |
| 32768 | 用于网络发现的出站规则，以允许使用通用即插即用设备。[TCP] |
Outbound rule for Network Discovery to allow use of Universal Plug and Play. [TCP] |
| 32769 | 网络发现(NB-Name-In) |
Network Discovery (NB-Name-In) |
| 32772 | 用于网络发现的入站规则，以允许 NetBIOS 名称解析。[UDP 137] |
Inbound rule for Network Discovery to allow NetBIOS Name Resolution. [UDP 137] |
| 32773 | 网络发现(NB-Name-Out) |
Network Discovery (NB-Name-Out) |
| 32776 | 用于网络发现的出站规则，以允许 NetBIOS 名称解析。[UDP 137] |
Outbound rule for Network Discovery to allow NetBIOS Name Resolution. [UDP 137] |
| 32777 | 网络发现(NB-Datagram-In) |
Network Discovery (NB-Datagram-In) |
| 32780 | 用于网络发现的入站规则，以允许传输和接收 NetBIOS 数据报。[UDP 138] |
Inbound rule for Network Discovery to allow NetBIOS Datagram transmission and reception. [UDP 138] |
| 32781 | 网络发现(NB-Datagram-Out) |
Network Discovery (NB-Datagram-Out) |
| 32784 | 用于网络发现的出站规则，以允许传输和接收 NetBIOS 数据报。[UDP 138] |
Outbound rule for Network Discovery to allow NetBIOS Datagram transmission and reception. [UDP 138] |
| 32785 | 网络发现(WSD-In) |
Network Discovery (WSD-In) |
| 32788 | 用于网络发现的入站规则，以通过功能发现发现设备。[UDP 3702] |
Inbound rule for Network Discovery to discover devices via Function Discovery. [UDP 3702] |
| 32789 | 网络发现(WSD-Out) |
Network Discovery (WSD-Out) |
| 32792 | 用于网络发现的出站规则，以通过功能发现发现设备。[UDP 3702] |
Outbound rule for Network Discovery to discover devices via Function Discovery. [UDP 3702] |
| 32801 | 网络发现(LLMNR-UDP-In) |
Network Discovery (LLMNR-UDP-In) |
| 32804 | 用于网络发现的入站规则，以允许链路本地多播名称解析。[UDP 5355] |
Inbound rule for Network Discovery to allow Link Local Multicast Name Resolution. [UDP 5355] |
| 32805 | 网络发现(LLMNR-UDP-Out) |
Network Discovery (LLMNR-UDP-Out) |
| 32808 | 用于网络发现的出站规则，以允许链路本地多播名称解析。[UDP 5355] |
Outbound rule for Network Discovery to allow Link Local Multicast Name Resolution. [UDP 5355] |
| 32809 | 网络发现(Pub-WSD-In) |
Network Discovery (Pub-WSD-In) |
| 32811 | 网络发现(Pub WSD-Out) |
Network Discovery (Pub WSD-Out) |
| 32813 | 网络发现(WSD EventsSecure-In) |
Network Discovery (WSD EventsSecure-In) |
| 32814 | 用于通过功能发现允许安全 WSDAPI 事件的网络发现的入站规则。[TCP 5358] |
Inbound rule for Network Discovery to allow Secure WSDAPI Events via Function Discovery. [TCP 5358] |
| 32815 | 网络发现(WSD EventsSecure-Out) |
Network Discovery (WSD EventsSecure-Out) |
| 32816 | 用于通过功能发现允许安全 WSDAPI 事件的网络发现的出站规则。[TCP 5358] |
Outbound rule for Network Discovery to allow Secure WSDAPI Events via Function Discovery. [TCP 5358] |
| 32817 | 网络发现(WSD Events-In) |
Network Discovery (WSD Events-In) |
| 32818 | 用于网络发现通过功能发现允许 WSDAPI 事件的入站规则。[TCP 5357] |
Inbound rule for Network Discovery to allow WSDAPI Events via Function Discovery. [TCP 5357] |
| 32819 | 网络发现(WSD Events-Out) |
Network Discovery (WSD Events-Out) |
| 32820 | 用于网络发现通过功能发现允许 WSDAPI 事件的出站规则。[TCP 5357] |
Outbound rule for Network Discovery to allow WSDAPI Events via Function Discovery. [TCP 5357] |
| 32821 | 网络发现(UPnPHost-Out) |
Network Discovery (UPnPHost-Out) |
| 32825 | 网络发现(WSD 入站) |
Network Discovery (WSD-In) |
| 32826 | 网络发现通过设备关联框架发现设备的入站规则。[UDP 3702] |
Inbound rule for Network Discovery to discover devices via Device Association Framework. [UDP 3702] |
| 33002 | 远程协助 |
Remote Assistance |
| 33003 | 远程协助(TCP-In) |
Remote Assistance (TCP-In) |
| 33006 | 用于远程协助通信的入站规则。[TCP] |
Inbound rule for Remote Assistance traffic. [TCP] |
| 33007 | 远程协助(TCP-Out) |
Remote Assistance (TCP-Out) |
| 33010 | 用于远程协助通信的出站规则。[TCP] |
Outbound rule for Remote Assistance traffic. [TCP] |
| 33011 | 远程协助(RA 服务器 TCP-In) |
Remote Assistance (RA Server TCP-In) |
| 33014 | 用于允许提供协助的远程协助的入站规则。[TCP] |
Inbound rule for Remote Assistance to allow offers for assistance. [TCP] |
| 33015 | 远程协助(RA 服务器 TCP-Out) |
Remote Assistance (RA Server TCP-Out) |
| 33018 | 用于允许提供协助的远程协助的出站规则。[TCP] |
Outbound rule for Remote Assistance to allow offers for assistance. [TCP] |
| 33019 | 远程协助(SSDP UDP-In) |
Remote Assistance (SSDP UDP-In) |
| 33022 | 用于远程协助的入站规则，以允许使用简单服务发现协议。[UDP 1900] |
Inbound rule for Remote Assistance to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 33023 | 远程协助(SSDP UDP-Out) |
Remote Assistance (SSDP UDP-Out) |
| 33026 | 用于远程协助的出站规则，以允许使用简单服务发现协议。[UDP 1900] |
Outbound rule for Remote Assistance to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 33027 | 远程协助(SSDP TCP-In) |
Remote Assistance (SSDP TCP-In) |
| 33030 | 用于远程协助的入站规则，以允许使用通用即插即用设备。[TCP 2869] |
Inbound rule for Remote Assistance to allow use of Universal Plug and Play. [TCP 2869] |
| 33031 | 远程协助(SSDP TCP-Out) |
Remote Assistance (SSDP TCP-Out) |
| 33034 | 用于远程协助的出站规则，以允许使用通用即插即用设备。[TCP] |
Outbound rule for Remote Assistance to allow use of Universal Plug and Play. [TCP] |
| 33035 | 远程协助(DCOM-In) |
Remote Assistance (DCOM-In) |
| 33036 | 用于通过 DCOM 允许提供协助的远程协助的入站规则。[TCP 135] |
Inbound rule for Remote Assistance to allow offers for assistance via DCOM. [TCP 135] |
| 33037 | 远程协助(PNRP-Out) |
Remote Assistance (PNRP-Out) |
| 33038 | 用于远程协助的出站规则，以允许使用对等名称解析协议。[UDP] |
Outbound rule for Remote Assistance to allow use of Peer Name Resolution Protocol. [UDP] |
| 33039 | 远程协助(PNRP-In) |
Remote Assistance (PNRP-In) |
| 33040 | 用于远程协助的入站规则，以允许使用对等名称解析协议。[UDP 3540] |
Inbound rule for Remote Assistance to allow use Peer Name Resolution Protocol. [UDP 3540] |
| 33252 | 远程计划任务管理 |
Remote Scheduled Tasks Management |
| 33253 | 远程计划任务管理(RPC) |
Remote Scheduled Tasks Management (RPC) |
| 33256 | 用于要通过 RPC/TCP 进行远程管理的任务计划程序服务的入站规则。 |
Inbound rule for the Task Scheduler service to be remotely managed via RPC/TCP. |
| 33257 | 远程计划任务管理(RPC-EPMAP) |
Remote Scheduled Tasks Management (RPC-EPMAP) |
| 33260 | 用于 RPCSS 服务的入站规则，以允许任务计划程序服务的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for the Task Scheduler service. |
| 33502 | 分布式事务处理协调器 |
Distributed Transaction Coordinator |
| 33503 | 分布式事务处理协调器(TCP-In) |
Distributed Transaction Coordinator (TCP-In) |
| 33506 | 用于允许分布式事务处理协调器的入站规则。[TCP] |
Inbound rule to allow traffic for the Distributed Transaction Coordinator. [TCP] |
| 33507 | 分布式事务处理协调器(TCP-Out) |
Distributed Transaction Coordinator (TCP-Out) |
| 33510 | 用于允许分布式事务处理协调器的出站规则。[TCP] |
Outbound rule to allow traffic for the Distributed Transaction Coordinator. [TCP] |
| 33511 | 分布式事务处理协调器 (RPC) |
Distributed Transaction Coordinator (RPC) |
| 33512 | 分布式事务处理协调器服务的核心事务管理器的入站规则将通过 RPC/TCP 以远程方式来管理。 |
Inbound rule for the Kernel Transaction Resource Manager for Distributed Transaction Coordinator service to be remotely managed via RPC/TCP. |
| 33513 | 分布式事务处理协调器 (RPC-EPMAP) |
Distributed Transaction Coordinator (RPC-EPMAP) |
| 33514 | RPCSS 的入站规则服务允许分布式事务处理协调器服务的核心事务管理器的 RPC/TCP 通信。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for the Kernel Transaction Resource Manager for Distributed Transaction Coordinator service. |
| 33752 | 路由和远程访问 |
Routing and Remote Access |
| 33753 | 路由和远程访问(L2TP-In) |
Routing and Remote Access (L2TP-In) |
| 33756 | 用于 RRAS 的入站规则，以允许第 2 层隧道协议通信。[UDP 1701] |
Inbound rule for RRAS to allow Layer 2 Tunnel Protocol traffic. [UDP 1701] |
| 33757 | 路由和远程访问(L2TP-Out) |
Routing and Remote Access (L2TP-Out) |
| 33760 | 用于 RRAS 的出站规则，以允许第 2 层隧道协议通信。[UDP 1701] |
Outbound rule for RRAS to allow Layer 2 Tunnel Protocol traffic. [UDP 1701] |
| 33761 | 路由和远程访问(PPTP-Out) |
Routing and Remote Access (PPTP-Out) |
| 33764 | 用于 RRAS 的出站规则，以允许点到点隧道协议通信。[TCP 1723] |
Outbound rule for RRAS to allow Point-to-Point Tunnel Protocol traffic. [TCP 1723] |
| 33765 | 路由和远程访问(PPTP-In) |
Routing and Remote Access (PPTP-In) |
| 33768 | 用于 RRAS 的入站规则，以允许点到点隧道协议通信。[TCP 1723] |
Inbound rule for RRAS to allow Point-to-Point Tunnel Protocol traffic. [TCP 1723] |
| 33769 | 路由和远程访问(GRE-In) |
Routing and Remote Access (GRE-In) |
| 33772 | 用于 RRAS 的入站规则，以允许通用路由封装协议通信。 |
Inbound rule for RRAS to allow Generic Routing Encapsulation Protocol traffic. |
| 33773 | 路由和远程访问(GRE-Out) |
Routing and Remote Access (GRE-Out) |
| 33776 | 用于 RRAS 的出站规则，以允许通用路由封装协议通信 |
Outbound rule for RRAS to allow Generic Routing Encapsulation Protocol Traffic |
| 34002 | Windows 协作计算机名注册服务 |
Windows Collaboration Computer Name Registration Service |
| 34003 | Windows 协作计算机名注册服务(PNRP-In) |
Windows Collaboration Computer Name Registration Service (PNRP-In) |
| 34004 | 用于允许对等名称解析的 Windows 协作计算机名注册服务的入站规则。[UDP 3540] |
Inbound rule for the Windows Collaboration Computer Name Registration Service to allow Peer Name Resolution. [UDP 3540] |
| 34005 | Windows 协作计算机名注册服务(PNRP-Out) |
Windows Collaboration Computer Name Registration Service (PNRP-Out) |
| 34006 | 用于允许对等名称解析的 Windows 协作计算机名注册服务的出站规则。[UDP 3540] |
Outbound rule for the Windows Collaboration Computer Name Registration Service to allow Peer Name Resolution. [UDP 3540] |
| 34007 | Windows 协作计算机名注册服务(SSDP-In) |
Windows Collaboration Computer Name Registration Service (SSDP-In) |
| 34008 | 用于允许使用简单服务发现协议的 Windows 协作计算机名注册服务的入站规则。[UDP 1900] |
Inbound rule for the Windows Collaboration Computer Name Registration Service to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 34009 | Windows 协作计算机名注册服务(SSDP-Out) |
Windows Collaboration Computer Name Registration Service (SSDP-Out) |
| 34010 | 用于允许使用简单服务发现协议的 Windows 协作计算机名注册服务的出站规则。[UDP 1900] |
Outbound rule for the Windows Collaboration Computer Name Registration Service to allow use of the Simple Service Discovery Protocol. [UDP 1900] |
| 34251 | Windows Management Instrumentation (WMI) |
Windows Management Instrumentation (WMI) |
| 34252 | Windows Management Instrumentation (DCOM-In) |
Windows Management Instrumentation (DCOM-In) |
| 34253 | 用于允许远程 Windows Management Instrumentation 的 DCOM 流量的入站规则。[TCP 135] |
Inbound rule to allow DCOM traffic for remote Windows Management Instrumentation. [TCP 135] |
| 34254 | Windows Management Instrumentation (WMI-In) |
Windows Management Instrumentation (WMI-In) |
| 34255 | 允许用于远程 Windows Management Instrumentation 的 WMI 流量的入站规则。[TCP] |
Inbound rule to allow WMI traffic for remote Windows Management Instrumentation. [TCP] |
| 34256 | Windows Management Instrumentation (ASync-In) |
Windows Management Instrumentation (ASync-In) |
| 34257 | 用于允许远程 Windows Management Instrumentation 的 异步 WMI 流量的入站规则。[TCP] |
Inbound rule to allow Asynchronous WMI traffic for remote Windows Management Instrumentation. [TCP] |
| 34258 | Windows Management Instrumentation (WMI-Out) |
Windows Management Instrumentation (WMI-Out) |
| 34259 | 用于允许远程 Windows Management Instrumentation 的 WMI 流量的出站规则。[TCP] |
Outbound rule to allow WMI traffic for remote Windows Management Instrumentation. [TCP] |
| 34501 | 远程卷管理 |
Remote Volume Management |
| 34502 | 远程卷管理 – 虚拟磁盘服务(RPC) |
Remote Volume Management - Virtual Disk Service (RPC) |
| 34503 | 远程卷管理的入站规则 - 要通过 RPC/TCP 远程管理的虚拟磁盘服务。 |
Inbound rule for the Remote Volume Management - Virtual Disk Service to be remotely managed via RPC/TCP. |
| 34504 | 远程卷管理 – 虚拟磁盘服务加载器(RPC) |
Remote Volume Management - Virtual Disk Service Loader (RPC) |
| 34505 | 远程卷管理的入站规则 - 要通过 RPC/TCP 远程管理的虚拟磁盘服务加载器。 |
Inbound rule for the Remote Volume Management - Virtual Disk Service Loader to be remotely managed via RPC/TCP. |
| 34506 | 远程卷管理(RPC-EPMAP) |
Remote Volume Management (RPC-EPMAP) |
| 34507 | 用于 RPCSS 服务允许远程卷管理的 RPC/TCP 通信的入站规则。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for Remote Volume Management. |
| 34752 | 性能日志和警报 |
Performance Logs and Alerts |
| 34753 | 性能日志和警报(TCP-In) |
Performance Logs and Alerts (TCP-In) |
| 34754 | 性能日志和警报通讯的入站规则。[TCP-In] |
Inbound rule for Performance Logs and Alerts traffic. [TCP-In] |
| 34755 | 性能日志和警报(DCOM-In) |
Performance Logs and Alerts (DCOM-In) |
| 34756 | 允许远程 DCOM 激活的性能日志和警报的入站规则。 [TCP-135] |
Inbound rule for Performance Logs and Alerts to allow remote DCOM activation. [TCP-135] |
| 35000 | 核心网络部分的防火墙规则是可靠的 IPv4 和 IPv6 连接所需的。 |
The firewall rules that are part of Core Networking are required for reliable IPv4 and IPv6 connectivity. |
| 35001 | Windows 远程管理 - 兼容模式(HTTP-In) |
Windows Remote Management - Compatibility Mode (HTTP-In) |
| 35002 | 通过 WS-Management 实现的 Windows 远程管理的兼容模式入站规则。[TCP 80] |
Compatibility mode inbound rule for Windows Remote Management via WS-Management. [TCP 80] |
| 36001 | “播放到设备”功能 |
Cast to Device functionality |
| 36002 | “播放到设备”流式处理服务器(HTTP-Streaming-In) |
Cast to Device streaming server (HTTP-Streaming-In) |
| 36003 | “播放到设备”服务器的入站规则，允许使用 HTTP 进行流式处理。[TCP 10246] |
Inbound rule for the Cast to Device server to allow streaming using HTTP. [TCP 10246] |
| 36004 | “播放到设备”流式处理服务器(RTCP-Streaming-In) |
Cast to Device streaming server (RTCP-Streaming-In) |
| 36005 | “播放到设备”服务器的入站规则，允许使用 RTSP 和 RTP 进行流式处理。[UDP] |
Inbound rule for the Cast to Device server to allow streaming using RTSP and RTP. [UDP] |
| 36006 | “播放到设备”流式处理服务器(RTP-Streaming-Out) |
Cast to Device streaming server (RTP-Streaming-Out) |
| 36007 | “播放到设备”服务器的出站规则，允许使用 RTSP 和 RTP 进行流式处理。[UDP] |
Outbound rule for the Cast to Device server to allow streaming using RTSP and RTP. [UDP] |
| 36008 | “播放到设备”流式处理服务器(RTSP-Streaming-In) |
Cast to Device streaming server (RTSP-Streaming-In) |
| 36009 | “播放到设备”服务器的入站规则，允许使用 RTSP 和 RTP 进行流式处理。[TCP 23554、23555、23556] |
Inbound rule for the Cast to Device server to allow streaming using RTSP and RTP. [TCP 23554, 23555, 23556] |
| 36010 | “播放到设备”功能(qWave-UDP-In) |
Cast to Device functionality (qWave-UDP-In) |
| 36011 | 用于“播放到设备”功能的入站规则，允许使用高质量 Windows 音频视频体验服务。[UDP 2177] |
Inbound rule for the Cast to Device functionality to allow use of the Quality Windows Audio Video Experience Service. [UDP 2177] |
| 36012 | “播放到设备”功能(qWave-UDP-Out) |
Cast to Device functionality (qWave-UDP-Out) |
| 36013 | 用于“播放到设备”功能的出站规则，允许使用高质量 Windows 音频视频体验服务。[UDP 2177] |
Outbound rule for the Cast to Device functionality to allow use of the Quality Windows Audio Video Experience Service. [UDP 2177] |
| 36014 | “播放到设备”功能(qWave-TCP-In) |
Cast to Device functionality (qWave-TCP-In) |
| 36015 | 用于“播放到设备”功能的入站规则，允许使用高质量 Windows 音频视频体验服务。[TCP 2177] |
Inbound rule for the Cast to Device functionality to allow use of the Quality Windows Audio Video Experience Service. [TCP 2177] |
| 36016 | “播放到设备”功能(qWave-TCP-Out) |
Cast to Device functionality (qWave-TCP-Out) |
| 36017 | 用于“播放到设备”功能的出站规则，允许使用高质量 Windows 音频视频体验服务。[TCP 2177] |
Outbound rule for the Cast to Device functionality to allow use of the Quality Windows Audio Video Experience Service. [TCP 2177] |
| 36100 | “播放到设备”流式处理服务器的 RTSP 强化规则 |
Cast to Device streaming server hardening rules for RTSP |
| 36101 | 允许到“播放到设备”流式处理服务器的传入 RTSP 连接 |
Allow incoming RTSP connections to the Cast to Device streaming server |
| 36102 | “播放到设备”流式处理服务器强化 - 阻止传入 TCP 流量 |
Cast to Device streaming server hardening - Block incoming TCP traffic |
| 36103 | “播放到设备”流式处理服务器强化 - 阻止传出 TCP 流量 |
Cast to Devicestreaming server hardening - Block outgoing TCP traffic |
| 36104 | “播放到设备”SSDP 发现(UDP-In) |
Cast to Device SSDP Discovery (UDP-In) |
| 36105 | 入站规则，允许使用 SSDP 发现“播放到设备”目标 |
Inbound rule to allow discovery of Cast to Device targets using SSDP |
| 36106 | “播放到设备”UPnP 事件(TCP-In) |
Cast to Device UPnP Events (TCP-In) |
| 36107 | 入站规则，允许接收来自“播放到设备”目标的 UPnP 事件 |
Inbound rule to allow receiving UPnP Events from Cast to Device targets |
| 36251 | 邻近感应共享 |
Proximity Sharing |
| 36252 | 通过 TCP 的邻近感应共享(TCP sharing-In) |
Proximity sharing over TCP (TCP sharing-In) |
| 36253 | 通过 TCP 的邻近感应共享的入站规则 |
Inbound rule for Proximity sharing over TCP |
| 36254 | 通过 TCP 的邻近感应共享(TCP sharing-Out) |
Proximity sharing over TCP (TCP sharing-Out) |
| 36255 | 通过 TCP 的邻近感应共享的出站规则 |
Outbound rule for Proximity sharing over TCP |
| 36501 | TPM 虚拟智能卡管理 |
TPM Virtual Smart Card Management |
| 36502 | TPM 虚拟智能卡管理(DCOM-In) |
TPM Virtual Smart Card Management (DCOM-In) |
| 36503 | 用于允许 DCOM 激活的远程 TPM 虚拟智能卡管理的入站规则。[TCP 135] |
Inbound rule for remote TPM Virtual Smart Card Management to allow DCOM activation. [TCP 135] |
| 36504 | TPM 虚拟智能卡管理(TCP-In) |
TPM Virtual Smart Card Management (TCP-In) |
| 36505 | 远程 TPM 虚拟智能卡管理流量的入站规则。[TCP] |
Inbound rule for remote TPM Virtual Smart Card Management traffic. [TCP] |
| 36506 | TPM 虚拟智能卡管理(TCP-Out) |
TPM Virtual Smart Card Management (TCP-Out) |
| 36507 | 远程 TPM 虚拟智能卡管理流量的出站规则。[TCP] |
Outbound rule for remote TPM Virtual Smart Card Management traffic. [TCP] |
| 36751 | 远程关机 |
Remote Shutdown |
| 36753 | 远程关机入站规则(TCP-In) |
Inbound Rule for Remote Shutdown (TCP-In) |
| 36754 | 通过动态 RPC/TCP 的远程关机入站规则。 |
Inbound rule for the Remote Shutdown via dynamic RPC/TCP. |
| 36755 | 远程关机入站规则(RPC-EP-In) |
Inbound Rule for Remote Shutdown (RPC-EP-In) |
| 36756 | 允许 RPC/TCP 通信的 RPCSS 服务入站规则 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic |
| 36801 | 远程事件监视器 |
Remote Event Monitor |
| 36802 | 远程事件监视器(RPC) |
Remote Event Monitor (RPC) |
| 36803 | 用于通过 RPC/TCP 监视远程事件的入站规则。 |
Inbound rule for remote event monitoring via RPC/TCP. |
| 36804 | 远程事件监视器(RPC-EPMAP) |
Remote Event Monitor (RPC-EPMAP) |
| 36805 | RPCSS 服务的入站规则，允许 RPC/TCP 流量用于远程事件监视。 |
Inbound rule for the RPCSS service to allow RPC/TCP traffic for remote event monitoring. |
| 36851 | Wi-Fi Direct 网络发现 |
Wi-Fi Direct Network Discovery |
| 36852 | Wi-Fi Direct 网络发现(输入) |
Wi-Fi Direct Network Discovery (In) |
| 36853 | 用于在 Wi-Fi Direct 网络上发现 WSD 设备的入站规则。 |
Inbound rule to discover WSD devices on Wi-Fi Direct networks. |
| 36854 | Wi-Fi Direct 网络发现(输出) |
Wi-Fi Direct Network Discovery (Out) |
| 36855 | 用于在 Wi-Fi Direct 网络上发现 WSD 设备的出站规则。 |
Outbound rule to discover WSD devices on Wi-Fi Direct networks. |
| 36856 | Wi-Fi Direct 后台处理程序使用(输入) |
Wi-Fi Direct Spooler Use (In) |
| 36857 | 用于在 Wi-Fi Direct 网络上使用 WSD 打印机的入站规则。 |
Inbound rule to use WSD printers on Wi-Fi Direct networks. |
| 36858 | Wi-Fi Direct 后台处理程序使用(输出) |
Wi-Fi Direct Spooler Use (Out) |
| 36859 | 用于在 Wi-Fi Direct 网络上使用 WSD 打印机的出站规则。 |
Outbound rule to use WSD printers on Wi-Fi Direct networks. |
| 36860 | Wi-Fi Direct 扫描服务使用(输入) |
Wi-Fi Direct Scan Service Use (In) |
| 36861 | 用于在 Wi-Fi Direct 网络上使用 WSD 扫描仪的入站规则。 |
Inbound rule to use WSD scanners on Wi-Fi Direct networks. |
| 36862 | Wi-Fi Direct 扫描服务使用(输出) |
Wi-Fi Direct Scan Service Use (Out) |
| 36863 | 用于在 Wi-Fi Direct 网络上使用 WSD 扫描仪的出站规则。 |
Outbound rule to use WSD scanners on Wi-Fi Direct networks. |
| 36902 | 软件负载平衡器 |
Software Load Balancer |
| 36903 | 软件负载平衡器多路复用器(TCP-In) |
Software Load Balancer Multiplexer (TCP-In) |
| 36904 | 使用软件负载平衡器多路复用器可与网络控制器进行 TCP 通信。[TCP] |
The Software Load Balancer Multiplexer enables TCP communication to the Network Controller. [TCP] |
| 37002 | AllJoyn 路由器 |
AllJoyn Router |
| 37003 | AllJoyn 路由器(TCP-In) |
AllJoyn Router (TCP-In) |
| 37004 | 用于 AllJoyn 路由器流量的入站规则 [TCP] |
Inbound rule for AllJoyn Router traffic [TCP] |
| 37005 | AllJoyn 路由器 (TCP-Out) |
AllJoyn Router (TCP-Out) |
| 37006 | 用于 AllJoyn 路由器流量的出站规则 [TCP] |
Outbound rule for AllJoyn Router traffic [TCP] |
| 37007 | AllJoyn 路由器 (UDP-In) |
AllJoyn Router (UDP-In) |
| 37008 | 用于 AllJoyn 路由器流量的入站规则 [UDP] |
Inbound rule for AllJoyn Router traffic [UDP] |
| 37009 | AllJoyn 路由器 (UDP-Out) |
AllJoyn Router (UDP-Out) |
| 37010 | 用于 AllJoyn 路由器流量的出站规则 [UDP] |
Outbound rule for AllJoyn Router traffic [UDP] |
| 37101 | DIAL 协议服务器 |
DIAL protocol server |
| 37102 | DIAL 协议服务器(HTTP-In) |
DIAL protocol server (HTTP-In) |
| 37103 | 用于允许使用 HTTP 远程控制应用的 DIAL 协议服务器入站规则。[TCP 10247] |
Inbound rule for DIAL protocol server to allow remote control of Apps using HTTP. [TCP 10247] |
| 37302 | mDNS |
mDNS |
| 37303 | mDNS (UDP-In) |
mDNS (UDP-In) |
| 37304 | mDNS 流量的入站规则 [UDP] |
Inbound rule for mDNS traffic [UDP] |
| 37305 | mDNS (UDP-Out) |
mDNS (UDP-Out) |
| 37306 | mDNS 流量的出站规则 [UDP] |
Outbound rule for mDNS traffic [UDP] |
| 38002 | 此功能用于在企业环境中的计算机计算和许可证兼容。 |
This feature is used for machine counting and license compliance in enterprise environments. |
| 38252 | 此功能允许位于同一子网的后台智能传送服务(BITS)客户端查找和共享存储在 BITS 缓存中的文件。(使用 WSDAPI 和 RPC) |
This feature allows Background Intelligent Transfer Service (BITS) clients that are in the same subnet to locate and share files that are stored in the BITS cache. (Uses WSDAPI and RPC) |
| 38502 | 此功能用于与网络上的其他用户共享本地文件和打印机。(使用 NetBIOS、LLMNR、SMB 和 RPC) |
This feature is used for sharing local files and printers with other users on the network. (Uses NetBIOS, LLMNR, SMB and RPC) |
| 38602 | 该功能用于使用 SMBDirect 协议在 RDMA 上共享本地文件。(使用 RDMA) |
This feature is used for sharing local files over RDMA using the SMBDirect protocol. (Uses RDMA) |
| 38752 | 此功能用于从远程系统访问桌面。 |
This feature is used for accessing the desktop from a remote system. |
| 39002 | 此功能用于连接到 iSCSI 目标服务器和设备。 |
This feature is used for connecting to iSCSI target servers and devices. |
| 39252 | 此功能允许远程查看和管理本地事件日志。(使用命名管道和 RPC) |
This feature allows remote viewing and management of the local event log. (Uses Named Pipes and RPC) |
| 39502 | 此功能允许远程管理本地服务。(使用命名管道和 RPC) |
This feature allows remote management of local services. (Uses Named Pipes and RPC) |
| 39752 | 此功能允许可远程管理的服务接收 RPC 通信。(使用命名管道和 RPC) |
The feature allows remotely manageable services to receive RPC traffic. (Uses Named Pipes and RPC) |
| 40002 | 此功能允许远程管理本地 Windows 防火墙。(使用 RPC) |
This feature allows remote management of the local Windows Firewall. (Uses RPC) |
| 40252 | 此功能允许通过 WS-Management (用于远程管理操作系统和设备的基于 Web 服务的协议)远程管理系统。 |
This feature allows remote management of the system via WS-Management, a web services-based protocol for remote management of operating systems and devices. |
| 40502 | 此功能允许使用媒体传输协议(MTP)从启用网络的照相机或媒体设备向你的计算机传输媒体。(使用 UPnP 和 SSDP) |
This feature allows the transfer of media from your network enabled camera or media device to your computer using the Media Transfer Protocol (MTP). (Uses UPnP and SSDP) |
| 40752 | 此功能允许 Media Center 扩展器与运行 Windows Media Center 的计算机通信。(使用 SSDP 和 qWave) |
This feature allows Media Center Extenders to communicate with a computer running Windows Media Center. (Uses SSDP and qWave) |
| 41002 | 此功能允许用户通过 UDP 接收流媒体。 |
This feature allows users to receive streaming media over UDP. |
| 41252 | 此功能允许用户通过网络共享媒体。(使用 UPnP、SSDP 和 qWave) |
This feature enables users to share media over a network. (Uses UPnP, SSDP and qWave) |
| 41500 | 此功能允许用户通过 Internet 共享家庭媒体 |
This feature allows users to share out home media over the Internet |
| 41752 | 使用此功能，用户可通过有线网络或无线网络连接到投影仪，以投影演示文稿。(使用 WSDAPI) |
This feature enables users to connect to projectors over wired or wireless networks to project presentations. (Uses WSDAPI) |
| 42002 | 需要此功能来启用各种对等程序和技术。(使用 SSDP 和 PNRP) |
This feature is required to enable various peer-to-peer programs and technologies. (Uses SSDP and PNRP) |
| 42252 | 此功能用于跨越网络的合作，以与其他人共享文档、程序或桌面。(使用 DFSR 和 P2P) |
This feature is used for collaborating over a network to share documents, programs or your desktop with other people. (Uses DFSR and P2P) |
| 42752 | 此功能允许该计算机发现网络上的其他设备，也允许网络上的其他设备发现该计算机。(使用功能发现主机和发布服务、UPnP、SSDP、NetBios 和 LLMNR) |
This feature allows this computer to discover other devices and be discovered by other devices on the network. (Uses Function Discovery Host and Publication Services, UPnP, SSDP, NetBIOS and LLMNR) |
| 43002 | 此功能允许该计算机的用户请求来自网络中其他用户的远程协助。(使用 UPnP、SSDP、PNRP 和 Teredo) |
This feature allows users of this computer to request remote assistance from other users on the network. (Uses UPnP, SSDP, PNRP and Teredo) |
| 43252 | 此功能允许远程管理本地任务计划服务。(使用 RPC) |
This feature allows remote management of the local task scheduling service. (Uses RPC) |
| 43502 | 此功能协调用于更新受事务保护的资源(如数据库、消息队列和文件系统)的事务。 |
This feature coordinates transactions that update transaction-protected resources, such as databases, message queues and file systems. |
| 43752 | 此功能用于允许传入 VPN 和 RAS 连接。 |
This feature is used to allow incoming VPN and RAS connections. |
| 44002 | 此功能允许其他计算机使用对等名称解析协议查找并与你的计算机通信。(使用 SSDP 和 PNRP) |
This feature allows other computers to find and communicate with your computer using the Peer Name Resolution Protocol. (Uses SSDP and PNRP) |
| 44251 | 此功能通过在一组由分布式管理任务组的一般信息模型(CIM)定义的类中暴露一组可管理的组件允许远程管理 Windows。(使用 DCOM) |
This feature allows remote management of Windows by exposing a set of manageable components in a set of classes defined by the Common Information Model (CIM) of the distributed management task force. (Uses DCOM) |
| 44501 | 此功能提供远程软件和硬件磁盘卷管理。(使用 RPC) |
This feature provides remote software and hardware disk volume management. (Uses RPC) |
| 44752 | 此功能允许远程管理性能日志和警报服务。(使用 RPC) |
This feature allows remote management of the Performance Logs and Alerts service. (Uses RPC) |
| 46001 | 该功能能够将音乐、视频和照片流式处理到 DLNA 数字媒体呈现器设备。 |
This feature enables streaming of music, video and pictures to DLNA Digital Media Renderer devices. |
| 46251 | 该功能支持在具有邻近感应设备(连接在一起时)的两台电脑之间共享内容。 |
This feature enables sharing of content between two PCs with proximity devices when tapped together. |
| 46501 | 此功能允许远程管理 TPM 虚拟智能卡设备。(使用 DCOM) |
This feature allows remote management of TPM virtual smart card devices. (Uses DCOM) |
| 46751 | 此功能允许远程关闭/重新启动计算机 |
This feature allows remote shutdown/restart of a computer |
| 46801 | 此功能允许远程事件监视。(使用 RPC) |
This feature allows remote event monitoring. (Uses RPC) |
| 46851 | 此功能允许这台计算机发现通过 WFD 连接的打印机。 |
This feature allows this computer to discover printers connected via WFD. |
| 46901 | 此组包含软件负载平衡器的规则 |
This group contains Rules for Software Load Balancer |
| 47001 | 此组包含用于 AllJoyn 路由器的规则 |
This group contains Rules for the AllJoyn Router |
| 47101 | 此组包含用于在远程设备上启用应用发现和启动的 DIAL 协议规则 |
This group contains Rules for DIAL protocol that enables apps discovery and launching on remote devices |
| 47301 | 此组中包含 mDNS 的规则。 |
This group contains rules for mDNS. |