| File name: | rasdlg.dll.mui |
| Size: | 80384 byte |
| MD5: | a7690ccc605f427eebda34409c5e0b20 |
| SHA1: | cc7045bf6a103c4dc73a949e55846ddc301fb8ee |
| SHA256: | f81e7ee0d1b77962aa91e56bd4fc41e1f05efd624d62471288c147bedfba4132 |
| Operating systems: | Windows 10 |
| Extension: | MUI |
If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.
| id | Chinese (Simplified) | English |
|---|---|---|
| 187 | 不，不要拨号(&N) | &No, do not dial |
| 188 | 你(或一个程序)从 %1 请求信息。你想使用哪一个连接? | You (or a program) have requested information from %1. Which connection do you want to use? |
| 189 | 添加可选的电话号码 | Add Alternate Phone Number |
| 190 | 仅拨第一个可用的设备 | Dial only first available device |
| 191 | 拨所有的设备 | Dial all devices |
| 192 | 需要时才拨设备 | Dial devices only as needed |
| 193 | 输入一个用户名和密码，该用户具有对远程网络域的访问权。 | Enter a user name and password with access to the remote network domain. |
| 195 | 区号必须只含有 0 到 9 的数字。 | The area code must contain only the digits 0 to 9. |
| 196 | 项目名必须含有至少一个非空白字符，并且不能以句号打头。请选择一个不同的名称。 | The entry name must contain at least one non-blank character and cannot begin with a period. Choose a different name. |
| 198 | 未能加载自定义验证配置 DLL。请确保自定义身份验证软件包已正确安装。 | The custom authentication configuration DLL could not be loaded. Make sure the custom authentication package is correctly installed. |
| 199 | 选择的连接是由多重协议路由器所创建的。 请使用“路由选择及 RAS 管理”工具来挂断连接。 |
The connection selected was established by the Multiprotocol router. Please use the 'Routing and RAS Admin' tool to hang up the connection. |
| 200 | 注释 | Comment |
| 201 | 自定义身份验证软件包配置失败。 | The custom authentication package configuration failed. |
| 202 | TCP/IP 没有安装，或者已为路由和远程访问禁用。在“控制面板”中，启动“网络”，转到“服务”页面，选择“路由和远程访问服务”属性，然后再按“网络”按钮。 | TCP/IP is not installed or is disabled for Routing and Remote Access. In Control Panel, start Network, go to the Services page, choose 'Routing and Remote Access Service' Properties, and press the Network button. |
| 204 | 你想从列表删除所选的设备吗? | Do you want to remove the selected device(s) from the list? |
| 205 | 你想从电话簿删除 %1 吗? | Do you want to delete %1 from the phonebook? |
| 206 | 你想断开 %1 的连接吗? | Do you want to disconnect from %1? |
| 207 | 名为 %1 的文件已经存在。你想覆盖它吗? | A file named %1 already exists. Do you want to overwrite it? |
| 208 | 在脚本中发现语法错误。你想查看错误日志吗? | Syntax errors were found in the script. Do you want to view the error log? |
| 209 | '%1' 现在已连接。 | '%1' is now connected. |
| 210 | 右键单击任务栏上“拨号网络监视器”，以挂断连接，或检查连接的状态。 | Right-click the Dial-Up Networking Monitor on the task bar to hang up or check the status of your connection. |
| 212 | 已成功连接。 | Connected successfully. |
| 214 | lnk | lnk |
| 215 | 拨号快捷方式文件(*.rnk) | Dial-up shortcut files (*.rnk) |
| 216 | *.rnk | *.rnk |
| 217 | 创建拨号快捷方式 | Create Dial-Up Shortcut |
| 218 | 到 %1 的链接没有成功。重新连接被挂起... | Link to %1 failed. Reconnect pending... |
| 219 | 无法检索帧信息。 | Cannot retrieve framing information. |
| 220 | 无法检索端口信息。 | Cannot retrieve port information. |
| 221 | 无法检索投影信息。 | Cannot retrieve projection information. |
| 222 | 无法加载连接列表。 | Cannot load connection list. |
| 223 | 客户端: | Client: |
| 224 | 详细信息 | Details |
| 225 | 设备: | Device: |
| 226 | 网络: | Network: |
| 227 | (没有连接) | (not connected) |
| 228 | 连接(&C)... | &Connect... |
| 229 | 挂断(&U) | Hang &Up |
| 230 | 拨号连接 | Dial-up Connection |
| 231 | 调制解调器配置被设置为默认值 | Modem configuration set to defaults |
| 232 | COM1 | COM1 |
| 233 | 远程路由器 | Remote Router |
| 234 | 调制解调器或设备 | Modem or device |
| 235 | 为远程路由器上的该接口帐户输入一个用户名。 | Enter a username for this interface's account on the remote router. |
| 236 | 名为 %1 的项目已经存在。请选择其他名称。 | An entry named %1 already exists. Please choose a different name. |
| 237 | 你也许要允许不加密就将你的密码送出。 | You may want to allow sending your password without encryption. |
| 238 | 密码加密 | Password Encryption |
| 241 | 电话号码(&N): | Phone &number: |
| 242 | 回电号码 | Call Me Back At |
| 243 | 编辑可选的电话号码 | Edit Alternate Phone Number |
| 244 | 因为此连接目前为活动的，所以下次拨此连接前有些设置不会生效。 | Since this connection is currently active, some settings will not take effect until the next time you dial it. |
| 245 | 没有对所有用户都可用的连接。你必须登录才能登录。 | There are no connections available to all users. You must log on before dialing. |
| 246 | 电话簿是空的。 要添加项目，请单击“确定”。 |
The phonebook is empty. To add an entry, click OK. |
| 247 | 由于导入/导出限制，数据加密在这个版本的 Windows 中不能使用。 | Due to import/export restrictions, data encryption is not available in this version of Windows. |
| 249 | 错误 %1: %2 | Error %1: %2 |
| 250 | %1 错误 %2: %3 |
%1 Error %2: %3 |
| 251 | %1 错误 %2: %3 诊断: %4 |
%1 Error %2: %3 Diagnostic: %4 |
| 252 | %1 错误 %2: %3 失败编码: %4 |
%1 Error %2: %3 Fail Code: %4 |
| 253 | %1 错误 %2: %3 有关详细信息，请按 F1。 |
%1 Error %2: %3 Press F1 for more information. |
| 254 | %1 错误 %2: %3 名称: %4 |
%1 Error %2: %3 Name: %4 |
| 255 | %1 %4 |
%1 %4 |
| 256 | %1 错误 %2: %3 响应: %4 |
%1 Error %2: %3 Response: %4 |
| 257 | 失败代码: 0x%1 |
Fail Code: 0x%1 |
| 258 | 名称: %1 |
Name: %1 |
| 259 | %1 CP 报告了错误 %2: %3 |
%1 CP reported error %2: %3 |
| 260 | %1 CP 已被成功连接。 |
%1 CP connected successfully. |
| 261 | 你可以选择要使用哪个拨号协议。 | You can choose which dial-up protocol to use. |
| 262 | 选择拨号协议 | Choose Dial-up Protocol |
| 263 | 单击“完成”以保存“%1”。 | Click Finish to save '%1'. |
| 264 | netcfg.hlp | netcfg.hlp |
| 265 | 将连接成功的号码在连接时移到列表的顶端(&M) | &Move successful number to the top of the list on connection |
| 266 | 新电话号码(&N): | &New phone number: |
| 267 | 电话号码(&P): | &Phone numbers: |
| 268 | 电话号码 | Phone Numbers |
| 269 | 可以输入一个固定的 IP 地址。 | You may enter a fixed IP address. |
| 270 | IP 地址 | IP Address |
| 271 | Internet 协议 (TCP/IP) 没有安装，或者已为远程访问停用。在“控制面板”中，启动“网络”，转到“服务”页面，选择“远程访问服务”属性，然后再单击“网络”。 | The Internet protocols (TCP/IP), are not installed or are disabled for Remote Access. In Control Panel, start Network, go to the Services page, choose 'Remote Access Service' Properties, and then click Network. |
| 272 | TCP/IP | TCP/IP |
| 273 | IPsec，默认策略 | IPsec, default policy |
| 275 | (当前位置) | (the current location) |
| 276 | ISDN | ISDN |
| 277 | 所有可用 ISDN 线路都是多重链接的 | All available ISDN lines multi-linked |
| 278 | 64K 数字 | 64K Digital |
| 279 | 56K 数字 | 56K Digital |
| 280 | 56K 声音 | 56K Voice |
| 281 | 连接前可能需要一个特殊过程。 | You may need a special procedure before connecting. |
| 282 | 选择登录选项 | Choose Logon Options |
| 283 | %d%% | %d%% |
| 284 | %s 的电话号码 | Phone number for %s |
| 285 | 新位置(&N): | &New location: |
| 286 | 位置(&L): | &Locations: |
| 287 | 位置 | Locations |
| 288 | 这个设备将用于建立连接。 | This device will be used to make the connection. |
| 289 | 选择设备 | Select a Device |
| 290 | 如果不是在呼叫 PPP 服务器，多重线路不能被绑在一起使用。 | Multiple lines cannot be bundled unless you are calling a PPP server. |
| 291 | 调制解调器 | Modem |
| 292 | 没有安装调制解调器。 | The modem is not installed. |
| 293 | Microsoft 点对点加密，128 位 RSA/RC4 | Microsoft Point-to-Point Encryption, 128-bit RSA/RC4 |
| 294 | Microsoft 点对点加密，40 位 RSA/RC4 | Microsoft Point-to-Point Encryption, 40-bit RSA/RC4 |
| 295 | 多重线路 | Multiple Lines |
| 296 | (单击“配置”来设置) | (Click Configure to set) |
| 297 | 可以输入固定的 DNS 和 WINS 地址。 | You may enter fixed DNS and WINS addresses. |
| 298 | 名称服务器地址 | Name Server Addresses |
| 300 | PPP | PPP |
| 301 | PPP 多重链接 | PPP multi-link |
| 304 | 个人电话簿已被创建并已用系统电话簿的内容初始化。 | A personal phonebook has been created and initialized with the contents of the system phonebook. |
| 305 | 没有选择备用电话簿。 | No alternate phonebook is selected. |
| 306 | 无法动态配置那个设备。 | That device cannot be dynamically configured. |
| 307 | 因为已被连接，所以无法删除该项目。 | The entry cannot be deleted because it is connected. |
| 308 | 没有选择项目。要创建项目，请单击“新建”。 | No entry is selected. To create an entry, click New. |
| 309 | 选定“指定 IP 地址”时，必须提供一个非零 IP 地址。 | A non-zero IP address must be supplied when 'specify an IP address' is selected. |
| 311 | (无) | (none) |
| 312 | '%1' 已在列表中。 | '%1' is already in the list. |
| 313 | 帮助我加密密码和数据 | Help secure my password and my data |
| 314 | %1 协议没有安装，或者已为远程访问禁用，所以无法选择。要更改，请在“控制面板”中，启动“网络”，选择“服务”页，选择“远程访问属性”，然后单击“网络”。 | The %1 protocol cannot be selected because it is not installed or is disabled for Remote Access. To change, in Control Panel start Network, choose Services page, Remote Access Properties, and click Network. |
| 315 | 无法保存密码。 | Cannot save password. |
| 316 | 无法显示数据。 | Cannot display data. |
| 317 | 无法获取自动拨号信息。 | Cannot get auto-dial information. |
| 318 | 无法加载对话框。 | Cannot load dialog. |
| 319 | 无法禁用共享访问。 | Cannot disable shared access. |
| 320 | 无法加载属性页面。 | Cannot load property page. |
| 321 | 无法加载电话簿。 | Cannot load phonebook. |
| 322 | 无法加载 RAS 管理器端口信息。 | Cannot load RAS Manager port information. |
| 323 | 无法从注册表读取用户首选项。 | Cannot read user preferences from registry. |
| 324 | 无法加载脚本信息。 | Cannot load script information. |
| 325 | 无法用记事本查看 script.log | Cannot view script.log with Notepad. |
| 326 | 无法用记事本编辑 switch.inf | Cannot edit switch.inf with Notepad. |
| 327 | 无法加载 TAPI 信息。 | Cannot load TAPI information. |
| 329 | 无法创建新的电话簿。 | Cannot create new phonebook. |
| 330 | 无法启用共享访问。 | Cannot enable shared access. |
| 331 | 无法连接电话簿项目。 | Cannot connect the phonebook entry. |
| 332 | 无法获取发送/接收缓冲区。 | Cannot get send/receive buffer. |
| 333 | 无法获取端口的状态信息。 | Cannot get status information for a port. |
| 334 | 无法检索协议信息。 | Cannot retrieve protocol information. |
| 335 | 无法从设备接收缓冲区。 | Cannot receive buffer from device. |
| 336 | 无法将缓冲区发送到设备。 | Cannot send buffer to device. |
| 337 | 无法检索数据。 | Cannot retrieve data. |
| 338 | 无法保存 TAPI 信息。 | Cannot save TAPI information. |
| 339 | 无法保存数据。 | Cannot save data. |
| 340 | 脚本已停止。 | The script has halted. |
| 341 | 由于一个错误，脚本已经停止。你想查看错误日志吗? | The script has halted due to an error. Do you want to view the error log? |
| 342 | 无法设置自动拨号信息。 | Cannot set auto-dial information. |
| 343 | 无法删除已保存的密码。 | Cannot delete saved password. |
| 344 | 无法写入电话簿。 | Cannot write phonebook. |
| 345 | 正在将首选项写入注册表 | Writing preferences to registry |
| 346 | 无法写快捷方式文件。 | Cannot write the shortcut file. |
| 347 | OK | OK |
| 348 | 无法配置传入连接。 | Cannot configure incoming connections. |
| 349 | 因为此连接由特权受限制的应用程序启动，你无法更改连接的属性。请使用“网络和共享中心”或“网络连接”文件夹来更改连接设置。 | Because this connection was started by an application with restricted privileges, you cannot change the properties of the connection. Please use the Network and Sharing Center or Network Connections folder to change the connection settings. |
| 350 | “密码”和“确认密码”字段不匹配。 | The Password and Confirm password fields do not match. |
| 351 | “新密码”和“确认新密码”字段不匹配。 | The New Password and Confirm New Password fields do not match. |
| 352 | pbk | pbk |
| 353 | 拨号电话簿 | Dial-Up Phonebook |
| 354 | *.pbk | *.pbk |
| 355 | 打开电话簿 | Open Phonebook |
| 356 | 复制电话簿项目 | Clone Phonebook Entry |
| 357 | 编辑电话簿项目 | Edit Phonebook Entry |
| 358 | 新建电话簿项目 | New Phonebook Entry |
| 361 | 网络连接 | Network Connections |
| 362 | 必须选择至少一个网络协议。 | You must select at least one network protocol. |
| 363 | 在呼叫 PPP 服务器之前，必须安装一个网络协议。 | Before you can call PPP servers you must install a network protocol. |
| 364 | 新前缀(&N): | &New prefix: |
| 365 | 前缀(&P): | &Prefixes: |
| 366 | 电话号码前缀 | Phone Number Prefixes |
| 369 | 当 %1 在接口 %2 上启动请求拨号连接时要使用的点对点协议设置: | Point-to-point protocol settings to use when %1 initiates a demand-dial connection on interface %2: |
| 370 | [要更改保存的密码，请单击这里] | [To change the saved password, click here] |
| 371 | 已删除 | Removed |
| 407 | 重拨(&R) | &Redial |
| 408 | 你已选择停用一个或更多的传送装置。这需要将被停用的传送装置的路由管理器和路由协议从这个请求拨号连接删除。 若要继续，请单击“是”。 若要重新启用传送，请单击“否”。 |
You have chosen to disable one or more transports. Doing so requires the routing managers and routing protocols for the disabled transports to be removed from this demand-dial connection. To continue, click Yes. To re-enable the transports, click No. |
| 410 | 请求拨号接口拨入帐户 | Demand-dial interface dial-in account. |
| 411 | 连接到远程路由器时，你需要设置接口“%1” 要使用的拨出凭据。这些凭据必须要符合在远程路由器上配置的拨入凭据。连接到 Windows NT4/2000 路由器时，用户名也必须符合远程路由器的接口名。 |
You now need to set the dial-out credentials that interface '%1' will use when connecting to the remote router. These credentials must match the dial-in credentials configured on the remote router. When connecting to a Windows NT4/2000 router, the user name must also match the interface name of the remote router. |
| 412 | mpradmin.hlp | mpradmin.hlp |
| 413 | 将连接成功的号码或地址在连接时移到列表的顶端(&M) | &Move successful number or address to the top of the list on connection |
| 414 | 新电话号码或地址(&N): | &New phone number or address: |
| 415 | 电话号码或地址(&P): | &Phone numbers or addresses: |
| 416 | 号码和地址 | Numbers and Addresses |
| 420 | 所有设备都已连接。 | All devices connected. |
| 421 | 正在接收注册结果... | Receiving registration results... |
| 422 | 正在发送回拨信息... | Sending callback information... |
| 423 | 正在发送新密码... | Sending new password... |
| 424 | 正在计算链接速度... | Calculating link speed... |
| 425 | 正在检查身份验证状态... | Checking authentication status... |
| 426 | 正在网络上注册你的计算机... | Registering your computer on the network... |
| 427 | 正在重试身份验证... | Retrying authentication... |
| 428 | 正在验证用户名和密码... | Verifying user name and password... |
| 429 | 已经过身份验证。 | Authenticated. |
| 430 | 正在连接，通过 %1... | Connecting through %1... |
| 431 | 正在拨号... | Dialing... |
| 432 | 调制解调器正在连接... | Modems connecting... |
| 433 | 用电缆连接... | Connecting over cable... |
| 434 | 正在拨 %1... | Dialing %1... |
| 436 | 正在通过 %1 进行后连接... | Post-connecting through %1... |
| 437 | 正在通过 %1 进行预连接... | Pre-connecting through %1... |
| 438 | 已连接。 | Connected. |
| 439 | 设备已连接。 | Device connected. |
| 440 | 已断开连接。 | Disconnected. |
| 441 | 调制解调器连接。 | Modem connected. |
| 442 | 电缆连接。 | Cable connected. |
| 443 | 正在打开端口... | Opening port... |
| 444 | 应用配置的设置 | Applying configured settings |
| 445 | 端口已打开。 | Port opened. |
| 446 | 后连接完成。 | Post-connect complete. |
| 447 | 预连接完成。 | Pre-connect complete. |
| 448 | 正准备回拨... | Preparing for callback... |
| 449 | 正在检查网络协议连接... | Checking network protocol connections... |
| 451 | 已连接，正在捆绑额外线路... | Connected, bundling additional lines... |
| 452 | 未知状态。 | Unknown state. |
| 453 | 正在等待回拨... | Waiting for callback... |
| 454 | 正在等待调制解调器重置... | Waiting for modem reset... |
| 455 | 要永久更改电话号码吗? | Make the phone number change permanent? |
| 456 | scp | scp |
| 457 | *.scp | *.scp |
| 458 | 拨号脚本文件(*.scp) | Dial-up script files (*.scp) |
| 459 | 浏览拨号脚本 | Browse Dial-Up Scripts |
| 460 | 必须选择至少一个调制解调器或适配器。 | You must select at least one modem or adapter. |
| 464 | 状态 | Status |
| 465 | 新后缀(&N): | &New suffix: |
| 466 | 后缀(&S): | &Suffixes: |
| 467 | 电话号码后缀 | Phone Number Suffixes |
| 470 | 手动调制解调器命令终端 | Manual Modem Command Terminal |
| 471 | 在拨号终端之后 | After Dial Terminal |
| 472 | 在拨号终端之前 | Before Dial Terminal |
| 474 | 10 分钟 | 10 minutes |
| 475 | 10 秒 | 10 seconds |
| 476 | 1 小时 | 1 hour |
| 477 | 1 分钟 | 1 minute |
| 478 | 24 小时 | 24 hours |
| 479 | 2 小时 | 2 hours |
| 480 | 2 分钟 | 2 minutes |
| 481 | 30 分钟 | 30 minutes |
| 482 | 30 秒 | 30 seconds |
| 483 | 3 秒 | 3 seconds |
| 484 | 4 小时 | 4 hours |
| 485 | 4 分钟 | 4 minutes |
| 486 | 5 分钟 | 5 minutes |
| 487 | 5 秒 | 5 seconds |
| 488 | 8 小时 | 8 hours |
| 489 | 从不 | never |
| 492 | 要丢弃项目的多重线路设置吗? | Discard multiple line settings for the entry? |
| 493 | 不可使用的设备 | Unavailable device |
| 495 | 远程访问首选项 | Remote Access Preferences |
| 500 | 不能启用请求拨号。 | Cannot enable on-demand dialing. |
| 502 | 不能禁用请求拨号。 | Cannot disable on-demand dialing. |
| 505 | VPN1 | VPN1 |
| 511 | Internet 连接共享被启用时，网络适配器将被设置为使用 IP 地址 192.168.0.1。这可能导致计算机会失去与网络上其他计算机的连接。如果这些计算机有静态 IP 地址，请将它们设置成可以自动获取 IP 地址。你确定要启用 Internet 连接共享吗? | When Internet Connection Sharing is enabled, your network adapter will be set to use IP address 192.168.0.1. This might cause your computer to lose connectivity with other computers on your network. If these other computers have static IP addresses, set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing? |
| 513 | %1 正在使用“%2” | %1 using '%2' |
| 514 | 连接(&C) | &Connect |
| 515 | 让服务器决定加密 | Let the server determine encryption |
| 516 | 始终加密我的数据 | Always encrypt my data |
| 517 | 使用 MPPE-40 数据加密 | Use MPPE-40 data encryption |
| 518 | 使用 MPPE-128 数据加密 | Use MPPE-128 data encryption |
| 519 | 目前的加密选项需要 MS-CHAP 或 EAP 身份验证。 | The current encryption selection requires MS-CHAP or EAP authentication. |
| 520 | 自定义身份验证消息 | Custom Authentication Message |
| 521 | 正在连接到 %1... | Connecting to %1... |
| 523 | 自动 | Automatic |
| 524 | 点对点隧道协议(PPTP) | Point to Point Tunneling Protocol (PPTP) |
| 525 | 使用 IPsec 的第 2 层隧道协议(L2TP/IPsec) | Layer 2 Tunneling Protocol with IPsec (L2TP/IPsec) |
| 526 | IKEv2 | IKEv2 |
| 527 | 安全套接字隧道协议(SSTP) | Secure Socket Tunneling Protocol (SSTP) |
| 529 | 虚拟专用连接 | Virtual Private Connection |
| 530 | 使用要求的任何格式的身份验证，包括明文。不要加密数据。 | Use any form of authentication required including clear text. Do not encrypt data. |
| 531 | 使用要求加密密码的任何格式的身份验证。不要加密数据。 | Use any form of authentication that requires passwords to be encrypted. Do not encrypt data. |
| 532 | 键入此项目的名称。 | Type a name for the entry. |
| 533 | 密码和数据加密。 | Encrypt passwords and data. |
| 534 | 键入在 1 和 65535 之间的端口号码。 | Type a port number between 1 and 65535. |
| 535 | 用“设置”按钮指定自定义身份验证和数据加密。 | Specify custom authentication and data encryption with the Settings button. |
| 536 | 使用要求加密的密码的任何格式的身份验证。不要加密数据。 | Use any form of authentication that requires encrypted passwords. Do not encrypt data. |
| 539 | 别的项目已经使用这个端口号码。 输入唯一端口号码。 |
The port number is already used by another entry. Enter a unique port number. |
| 540 | 为传入响应输入一个或多个端口。 | Enter one or more ports for incoming responses. |
| 541 | 选择要删除的项目。 | Select the entry you want to delete. |
| 542 | 1 秒 | 1 second |
| 543 | 选择要修改的项目。 | Select the entry you want to modify. |
| 576 | 20 分钟 | 20 minutes |
| 579 | 指定连接到你的工作区的连接名称。 | Specify a name for this connection to your workplace. |
| 581 | 网络应用程序设置 | Network Application Settings |
| 582 | 在下面框中输入此连接的名称。 | Type a name for this connection in the following box. |
| 584 | 在下面框中输入你的 ISP 的名称。 | Type the name of your ISP in the following box. |
| 585 | 高级属性 | Advanced Properties |
| 586 | 请键入专用网络上的服务器计算机的 IP 地址。 | Please type the IP address of the server computer on the private network. |
| 587 | 高级设置 | Advanced Settings |
| 588 | 项目名起始为 "." 或包含有效字符。 选择其他名称。 |
The entry name begins with a period or contains characters that are not valid. Choose a different name. |
| 589 | 属性 | Properties |
| 597 | 诊断报告 | Diagnostic Report |
| 598 | 目标地址为 IPv6 地址。PPTP 无法使用 IPv6。VPN 连接类型将设置为“自动”。 | The destination address is an IPv6 address.PPTP does not work over IPv6. The VPN connection type will be set to Automatic. |
| 1512 | 通信端口 | Communications Port |
| 1523 | 频道 | channel |
| 1528 | 直接连接 | Direct Connection |
| 1529 | 为此连接选择一个设备。 | Select a device for this connection. |
| 1530 | Microsoft YaHei UI | Verdana Bold |
| 1531 | 12 | 12 |
| 1532 | 连接类型 | Connection Type |
| 1533 | 选择你想要创建的请求拨号接口的类型。 | Select the type of demand-dial interface you want to create. |
| 1535 | 这是要被用来建立连接的设备。 | This is the device that will be used to make the connection. |
| 1537 | 键入你想呼叫的远程服务器或路由器的电话号码。 | Type the phone number of the remote server or router you are calling. |
| 1538 | VPN 类型 | VPN Type |
| 1539 | 选择你想创建的 VPN 连接的类型。 | Select the type of VPN connection you want to create. |
| 1540 | 目标地址 | Destination Address |
| 1541 | 远程路由器的名称或地址是什么? | What is the name or address of the remote router? |
| 1548 | 路由器脚本 | Router Scripting |
| 1549 | 你可为连接到远程路由器设置一个脚本。 | You can set up a script for connecting to the remote router. |
| 1550 | 拨入凭据 | Dial-In Credentials |
| 1551 | 配置远程路由器拨入这台服务器时要使用的用户名和密码。 | Configure the user name and password that the remote router will use when it dials in to this server. |
| 1552 | 拨出凭据 | Dial-Out Credentials |
| 1553 | 连接到远程路由器时提供要使用的用户名和密码。 | Supply the user name and password to be used when connecting to the remote router. |
| 1554 | 接口名称 | Interface Name |
| 1555 | 你可以键入这个连接的友好名称。 | You can type a friendly name for this connection. |
| 1556 | 没有可用设备 | No available devices |
| 1557 | 在本地计算机上名为 %1 的用户帐户已经存在。请求拨号接口是否应该配置成使用这个用户帐户? | A user account named %1 already exists on the local computer. Should the demand-dial interface be configured to use this user account? |
| 1559 | 允许没有加密的密码 | Allow unsecured password |
| 1560 | 要求加密的密码 | Require secured password |
| 1561 | 使用智能卡 | Use smart card |
| 1562 | 你至少要选择一个密码身份验证协议。 | You must select at least one password authentication protocol. |
| 1563 | 不允许加密(如果它需要加密，服务器将断开连接) | No encryption allowed (server will disconnect if it requires encryption) |
| 1564 | 可选加密(没有加密也可以连接) | Optional encryption (connect even if no encryption) |
| 1565 | 需要加密(如果服务器拒绝将断开连接) | Require encryption (disconnect if server declines) |
| 1566 | 最大强度的加密(如果服务器拒绝将断开连接) | Maximum strength encryption (disconnect if server declines) |
| 1567 | (启用加密) | (encryption enabled) |
| 1570 | 所选的 EAP 数据包不提供加密密钥。请选择一个提供密钥的 EAP 数据包或选择不加密。 | The selected EAP package does not provide encryption keys. Select an EAP package that does provide keys or choose not to encrypt. |
| 1571 | 当前的加密选择需要 EAP 或 MS-CHAP V2 登录安全方法。 | The current encryption selection requires EAP or MS-CHAP v2 logon security method. |
| 1572 | 协议及安全 | Protocols and Security |
| 1573 | 为这个连接选择传输和安全选项。 | Select transports and security options for this connection. |
| 1574 | 你所选择的协议包括 PAP 和/或 CHAP。如果其中一个有问题，数据就不能加密。你想保留这些设置吗? | The protocols you have selected include PAP and/or CHAP. If one of these is negotiated, data encryption will not occur. Do you want to keep these settings? |
| 1575 | 要连接到 '%1' 上，你必须首先连接到 '%2'。你想现在就连接到 '%2' 上吗? | To connect to '%1', you must first be connected to '%2'. Do you want to connect to '%2' now? |
| 1576 | 通过并行电缆连接... | Connecting over parallel cable... |
| 1577 | 通过红外线连接... | Connecting over infrared... |
| 1578 | 连接到并行电缆上。 | Parallel cable connected. |
| 1579 | 已通过红外线连接。 | Infrared connected. |
| 1580 | 安装的软件不支持此连接所配置的数据加密强度。此连接的安全属性被重置为使用可用的加密强度。 | This connection was configured to use a data encryption strength that is not supported by the installed software. The security properties of this connection have been reset to the available encryption strengths. |
| 1582 | 请输入用户名。 | Please enter a user name. |
| 1583 | 用户名和密码将保存为仅供你自己使用。已为此连接保存了供所有用户使用的用户名和密码。你想删除存为供所有用户使用的用户名和密码吗? | This user name and password will be saved for your own use. There is already a user name and password saved for all other users of this connection. Do you want to delete the user name and password saved for all other users? |
| 1584 | 例如，你可以输入你的工作地点名或你连接到的服务器名。 | For example, you could type the name of your workplace or the name of a server you will connect to. |
| 1585 | 帐户信息 | Account Information |
| 1586 | 此时无法完成请求。必须先重新启动系统，才能对配置进行任何更改。 | The request cannot be completed at this time. The system must first be restarted before any configuration changes can be made. |
| 1587 | 无法完成请求，因为另一个网络属性对话框已打开。请关闭所有其他对话框，然后重试。 | The request cannot be completed because another network property dialog box is open. Please close all other dialog boxes and then try again. |
| 1588 | 无法完成请求，因为访问已被拒绝。 | The request cannot be completed because access has been denied. |
| 1589 | 从你的服务提供者收到如下消息: %1 |
The following message was received from your service provider: %1 |
| 1590 | 重新连接 %1 | Reconnect %1 |
| 1591 | 服务名称 | Service Name |
| 1592 | 提供你宽带连接服务的名称是什么? | What is the name of the service that provides your broadband connection? |
| 1593 | 你将需要帐户名和密码来登录到你的帐户。 | You will need an account name and password to sign in to your account |
| 1594 | PPPOE1-0 | PPPOE1-0 |
| 1595 | 以太网上的点对点协议(PPPoE) | Point-to-Point Protocol over Ethernet (PPPoE) |
| 1596 | 宽带连接类型(&B): | Type of &broadband connection to make: |
| 1606 | 必须为此连接选择一种 EAP 方法。 | You must select an EAP method for this connection. |
| 1607 | 自定义加密 | Custom Encryption |
| 1611 | 宽带连接 | Broadband Connection |
| 1612 | 你选择了用预共享密钥，但没有输入。 请输入一个预共享密钥。 |
You have selected to use a preshared key but you have not entered one. Please enter a preshared key. |
| 1613 | 不能提交凭据 | Cannot Commit Credentials |
| 1634 | 因为禁用了 Windows Management Instrumentation (WMI) 服务，Windows 不能显示此连接或家庭网络的属性。 要配置此连接或家庭网络的属性，必须先启用 WMI 服务。请在控制面板的“管理工具”中，双击“服务”，然后右键单击“Windows Management Instrumentation”，然后单击“启动”。 |
Because the Windows Management Instrumentation (WMI) service has been disabled, Windows cannot display the properties of this connection or the home network. To configure the properties of this connection or your home network, first enable the WMI service. To do this, in Administrative Tools in Control Panel, double-click Services, right-click Windows Management Instrumentation, and then click Start. |
| 1635 | Windows 不能显示此连接的属性。Windows Management Instrumentation (WMI) 信息可能损坏。要更正此问题，请使用系统还原来将 Windows 还原到一个较早的时间点(称为还原点)。系统还原在“附件”中的“系统工具”文件夹中。 | Windows cannot display the properties of this connection. The Windows Management Instrumentation (WMI) information might be corrupted. To correct this, use System Restore to restore Windows to an earlier time (called a restore point). System Restore is located in the System Tools folder in Accessories. |
| 1646 | 允许传入回显请求 | Allow incoming echo request |
| 1647 | 允许传入时间戳请求 | Allow incoming timestamp request |
| 1648 | 允许传入掩码请求 | Allow incoming mask request |
| 1649 | 允许传入路由器请求 | Allow incoming router request |
| 1650 | 允许传出不可达目标 | Allow outgoing destination unreachable |
| 1651 | 允许传出源抑制 | Allow outgoing source quench |
| 1652 | 允许传出参数问题 | Allow outgoing parameter problem |
| 1653 | 允许传出时间超时 | Allow outgoing time exceeded |
| 1654 | 允许重定向 | Allow redirect |
| 1655 | log | log |
| 1656 | *.log | *.log |
| 1657 | 防火墙日志文件 (*.log) | Firewall log files (*.log) |
| 1658 | 浏览 | Browse |
| 1665 | 送到这台计算机的消息将被重复发送给发件人。这是疑难解答常用的，例如: ping 计算机。 | Messages sent to this computer will be repeated back to the sender. This is commonly used for troubleshooting, for example, to ping a computer. |
| 1666 | 发送给此计算机的数据可以通过一个标明数据接收时间的确认消息来获得承认。 | Data sent to this computer can be acknowledged with a confirmation message indicating the time that the data was received. |
| 1667 | 此计算机将侦听并响应对它所连的公用网络的详细信息的请求。 | This computer will listen for and respond to requests for more information about the public network to which it is attached. |
| 1668 | 此计算机将响应对它所识别的路由的信息请求。 | This computer will respond to requests for information about the routes it recognizes. |
| 1669 | 通过 Internet 发送的由于错误而没有到达此计算机的数据将被丢弃，由确认消息“目标不可访问”来解释失败。 | Data sent over the Internet that fails to reach this computer due to an error will be discarded and acknowledged with a "destination unreachable" message explaining the failure. |
| 1670 | 当此计算机的处理传入数据的能力不足以跟上传输速度时，数据将被丢弃，发送者将被要求降低速度。 | When this computer's ability to process incoming data cannot keep up with the rate of a transmission, data will be dropped and the sender will be asked to slow down. |
| 1671 | 如果此计算机由于数据头有问题而丢弃了数据，它将用一个“数据头错误”消息答复发送者。 | When this computer discards data it has received due to a problematic header, it will reply to the sender with a "bad header" error message. |
| 1672 | 如果此计算机因为要求的传输时间超过了允许时间而丢弃了没有完全传输的数据，它将用一个“超时”消息答复发送者。 | When this computer discards an incomplete data transmission because the entire transmission required more time than allowed, it will reply to the sender with a "time expired" message. |
| 1673 | 如果默认路径更改，从此计算机发送的数据将被重新路由。 | Data sent from this computer will be rerouted if the default path changes. |
| 1675 | 输入的日志文件大小无效。请输入介于 1 到 32767 KB 的值。 | The value entered for the log file size is not valid. Enter a value between 1 and 32767 KB. |
| 1685 | 你的用户帐户没有权限使用此连接。这通常是因为你以 Guest 登录。 | Your user account does not have permission to use this connection. Usually, this is because you are logged in as Guest. |
| 1686 | 输入用户名和密码。(如果你忘记了现存的帐户名或密码，请和你的网络管理员联系。) | Type a user name and password. (If you have forgotten an existing account name or password, contact your network administrator.) |
| 1688 | ISP 名称(&A) | ISP N&ame |
| 1689 | 公司名(&A) | Company N&ame |
| 1690 | 你要连接的电话号码是什么? |
What is the phone number you will use to make this connection? |
| 1691 | 远程网络的静态路由 | Static Routes for Remote Networks |
| 1692 | 静态路由是手工定义的、两网络间的常驻路由。 | A static route is a manually defined, permanent route between two networks. |
| 1693 | 目标 | Destination |
| 1694 | 网络掩码/前缀长度 | Network Mask/Prefix length |
| 1696 | 跃点数 | Metric |
| 1697 | 需要目标。 | Destination is required. |
| 1698 | 需要网络掩码。 | Network mask is required. |
| 1699 | 需要跃点数。 | Metric is required. |
| 1700 | 无效掩码。 | Invalid mask. |
| 1701 | 不能添加重复的路由。 | Cannot add duplicate route. |
| 1702 | 不能装载诊断功能 | Cannot load diagnostic functions |
| 1704 | 输入有效文件名。 | Enter a valid file name. |
| 1706 | 输入有效电子邮件地址。 | Enter a valid e-mail address. |
| 1710 | 没有诊断日志文件。 | No diagnostic log file is available. |
| 1711 | 无法启动 explorer.exe 来装载诊断日志文件! | Unable to launch explorer.exe to load the diagnostic log file. |
| 1713 | 此过程需要几分钟。你想继续吗? | This process can take several minutes. Do you want to continue? |
| 1715 | 不能将日志文件导入你指定的文件。可能磁盘空间不足。 | Cannot export log to the file you specified. There might not be enough disk space. |
| 1717 | 无法发送日志。请确定 Microsoft Outlook 已安装并正确配置。 | Cannot send the log. Make sure that Microsoft Outlook is installed and configured correctly. |
| 1718 | 正在生成报告... | Generating report... |
| 1720 | 写入文件完成。 | Writing to file is finished. |
| 1722 | 发送电子邮件完成。 | Sending e-mail is finished. |
| 1724 | 操作不成功。 | Operation was unsuccessful. |
| 1727 | 浏览文件夹 | Browse for Folder |
| 1728 | 完成了 | Finished |
| 1749 | PPTP 无法使用 IPv6。VPN 的连接类型将设置为“自动”。 | PPTP does not work over IPv6. The VPN connection type will be set to Automatic. |
| 1750 | 当前的 VPN 连接设置包括 PPTP (作为连接类型)和 PAP (作为允许的身份验证协议)。使用 PPTP 和 PAP 时没有加密数据。请更改安全设置或使用其他的连接类型。 | The current VPN connection settings include PPTP as the connection type and PAP as an allowed authentication protocol. Data is not encrypted when PPTP and PAP are used. Change the security settings or use a different connection type. |
| 1751 | 所选的协议包括 PAP 和/或 CHAP。当前的 VPN 选择可能没有加密数据。你想保留 VPN 选择吗? | The protocols you have selected include PAP and/or CHAP. The current VPN selection might not encrypt data. Do you want to keep the VPN selection? |
| 1753 | TCP/IPv6 | TCP/IPv6 |
| 1772 | 无效前缀长度。 | Invalid prefix length. |
| 1773 | 无效目标地址。 | Invalid destination address |
| 1850 | 6 秒 | 6 seconds |
| 1851 | 9 秒 | 9 seconds |
| 1852 | 12 秒 | 12 seconds |
| 1853 | 15 秒 | 15 seconds |
| 1854 | 6 分钟 | 6 minutes |
| 1855 | 12 分钟 | 12 minutes |
| 1856 | 15 分钟 | 15 minutes |
| 7301 | 传入的 TCP/IP 属性 | Incoming TCP/IP Properties |
| 7302 | 必须为该字段选择一个从 %1 到 %2 的数值。 | You must choose a value from %1 to %2 for this field. |
| 7306 | 传入的连接错误 | Incoming Connections Error |
| 7307 | 传入连接一般错误 | Incoming Connections General Error |
| 7308 | 传入的连接 | Incoming Connections |
| 7309 | 传入连接网络错误 | Incoming Connections Networking Error |
| 7310 | 传入连接多重链接状态错误 | Incoming Connections Multilink Status Error |
| 7312 | 传入连接初始化错误 | Incoming Connections Initialization Error |
| 7313 | 传入连接 TCP/IP 属性错误 | Incoming Connections TCP/IP Properties Error |
| 7316 | 常规 | Generic |
| 7317 | 设备 | Device |
| 7318 | 杂项数据库 | Miscellaneous Database |
| 7319 | 用户数据库 | User Database |
| 7320 | 协议数据库 | Protocol Database |
| 7321 | 必须为新用户输入一个登录名，或按“取消”。 | You must enter a logon name for the new user or press cancel. |
| 7322 | 输入的密码太短。 | The password you entered was too short. |
| 7323 | 输入的密码不一样。请重新输入。 | The passwords entered are not the same. Please re-enter them. |
| 7324 | 出现了一个内部错误。 | An internal error has occurred. |
| 7325 | Listview | Listview |
| 7326 | 试图提交对本地用户数据库所作的更改时，出现了一个错误。 | An error has occurred while attempting to commit the changes you have made to the local user database. |
| 7327 | 你没有足够的权限，无法给本地系统数据库添加用户。 | You have insufficient privileges to add a user to the local system database. |
| 7328 | 正在创建的用户已经在本地用户数据库中。 | The user you are trying create already exists in the local user database. |
| 7329 | 你输入的密码被拒绝，用户没有被添加到本地用户数据库中。 | The user was not added to the local user database because the password you entered was rejected. |
| 7330 | 由于一个内部错误，无法重新加载系统用户数据库。 | Unable to reload the system user database because of an internal error. |
| 7331 | 出现了一个内部错误: 本地用户数据库句柄已损坏。 | An internal error has occurred: The local user database handle is corrupt. |
| 7332 | 无法加载显示用户选项卡所需的资源。 | Unable to load the resources necessary to display the user tab. |
| 7333 | 试图回退对本地用户数据库所作的更改时，出现了一个内部错误。 | An internal error occurred while attempting to rollback the changes you made to the local user database. |
| 7334 | 设备数据库句柄已损坏。 | The device database handle is corrupt. |
| 7335 | 无法加载显示常规选项卡所需的资源。 | Unable to load the resources necessary to display the general tab. |
| 7336 | 试图提交所作的一些与设备/vpn 有关的更改时，出现了一个错误。 | An error has occurred while attempting to commit some of the device/vpn related changes you have made. |
| 7338 | 出现了一个内部错误: 网络组件数据库句柄已损坏。 | An internal error occurred: The networking component database handle is corrupt. |
| 7340 | 试图提交对网络组件所作的更改时，出现了一个错误。 | An error has occurred while attempting to commit the changes you have made to the networking components. |
| 7342 | 无法将对 TCP/IP 协议所作的更改提交给系统。 | Unable to commit the changes you made to the TCP/IP protocol to the system. |
| 7344 | 无法显示 TCPIP 属性。 | Unable to display the TCPIP properties. |
| 7346 | 无法从系统加载 TCP/IP 属性。 | Unable to load TCP/IP properties from the system. |
| 7348 | 传入的连接依靠路由和远程访问服务，但该服务无法启动。有关详细信息，请参阅系统事件日志。 | Incoming Connections depend on the Routing and Remote Access service which was unable to start. For more information, check the system event log. |
| 7349 | 系统此时无法允许编辑网络组件，这是因为在别处它们正在被修改。 | Unable to allow the editing of networking components at this time because they are currently being modified elsewhere. |
| 7350 | 因为一个输入的名称或密码违反了系统策略(太长、太短或形式不正确)，所以你输入的新用户没有被添加到本地用户数据库。 | The new user you entered was not added to the local user database because the name or password entered violated a system policy (it was too large, too small, or ill-formed). |
| 7351 | 系统无法删除要求的用户。 | The system is unable to delete the requested user. |
| 7352 | 由于正在使用，无法删除所选的网络组件。 | Unable to remove the selected network component because it is in use. |
| 7353 | 传入的连接警告 | Incoming Connections Warning |
| 7354 | 即使按“取消”，你删除的任何用户都会被从系统永久删除。你确定要永久删除 %s 吗? | Any users that you delete will be permanently removed from the system even if cancel is pressed. Are you sure you want to permanently remove %s? |
| 7355 | 正要切换到一个系统管理控制台。该传入连接属性页将被关闭；而且你所作的任何更改都会被提交给系统。可以继续吗? | You are about to switch to a system management console. This Incoming Connections property sheet will be closed and any changes you may have made will be committed to the system. Is it ok to continue? |
| 7356 | 网络掩码数值已更改。掩码中的零位后面只能跟零位。例如，用十进制点线计数法表达的网络掩码数值，255.255.0.0 是有效的；但 255.0.255.0 无效。 |
Your Network Mask value has been changed. A zero bit in a mask can only be followed by other zero bits. For example, a Network Mask value, expressed in decimal dotted notation, of 255.255.0.0, is valid, but 255.0.255.0 is not. |
| 7357 | 谁可以连接此计算机? | Who may connect to this computer? |
| 7358 | 你可以指定可以连接到这台计算机上的用户。 | You can specify the users who can connect to this computer. |
| 7359 | 其他人如何连接此计算机？ | How will people connect? |
| 7360 | 你可以选择你的计算机用来接受传入连接的设备。 | You can choose the devices your computer uses to accept incoming connections. |
| 7361 | 传入的虚拟专用网络(VPN)连接 | Incoming Virtual Private Network (VPN) Connection |
| 7362 | 另一台计算机可以通过 VPN 连接来连接到你的计算机 | Another computer can connect to yours through a VPN connection |
| 7363 | 网络软件允许此计算机接受其他类型计算机的连接 | Networking software allows this computer to accept connections from other kinds of computers |
| 7364 | 网络软件允许此计算机从其他类型的计算机接受连接。 | Networking software allows this computer to accept connections from other kinds of computers. |
| 7365 | 正在完成新建连接向导 | Completing the New Connection Wizard |
| 7366 | ||
| 7371 | 没有安装能接电话的硬件。 | No hardware capable of accepting calls is installed. |
| 7373 | 分配指定的网络号码(&N): | Assign specified &network number: |
| 7374 | 按顺序分配网络号，开始号码为(&N): | Assign &network numbers sequentially from: |
| 7375 | 新用户 | New User |
| 7378 | 目前没有安装可以接受直接连接的设备。 | No devices capable of accepting direct connections are currently installed. |
| 7379 | 新建传入连接警告 | New Incoming Connection Warning |
| 7380 | 因为已经配置了路由选择和远程访问，你必须使用路由和远程访问系统控制台来配置该机器以接收传入连接。取消更改并切换到该控制台吗? |
Because Routing and Remote access is already configured, you must use the Routing and Remote Access system console to configure this machine to receive incoming connections. Cancel changes and switch to this console? |
| 7381 | 自动分配网络号码(&S) | A&ssign network number automatically |
| 7382 | 自动分配网络号(&S) | A&ssign network numbers automatically |
| 7384 | 到 | to |
| 7385 | 通信端口(%s) | Communications Port (%s) |
| 7386 | 如果有用本地用户管理器或远程访问策略控制台设置的传入连接选项，网络连接不显示这些特殊选项。有关传入连接的完整和正确的信息，你需要使用这些控制台。 | Network Connections does not display some specialized options for inbound connections that have been set using the Local User Manager or Remote Access Policy consoles. For complete and correct information on incoming connections, you will need to use these consoles. |
| 7387 | 你所选择的用户回拨模式需要你键入一个有效的回拨号码。 | The user callback mode you have selected requires you to enter a valid callback number. |
| 7388 | Windows 必须重新启动才可完成该操作。现在就要重新启动吗? | Windows must reboot to complete the operation. Is it ok to reboot now? |
| 7389 | 当前选择的设备没有有效的配置选项。 | The currently selected device has no configuration options available. |
| 7390 | 无效范围 | Invalid Range |
| 7391 | 你请求为传入连接禁用“%1”。要禁用它，你必须停止“服务器” 服务。一旦停止，任何在这台计算机上的共享的目录或打印机对其他计算机都变为无效。你想启动系统控制台允许你终止“服务器” 服务吗? 在“计算机管理”中，单击“系统工具”并单击“服务”。在右边的窗格中用右键单击“Server”并单击“停止”。 |
You have requested that '%1' be disabled for Incoming Connections. In order to disable this, you must stop the 'Server' service. Once stopped, any shared directories or printers on this computer will no longer be available to any other computer. Do you want to bring up a system console that will allow you to stop the 'Server' service? Under Computer Management, click System Tools and then click Services. In the right pane, right-click Server and click stop. |
| 7392 | 这个串行端口没有启用以用于直接连接到另一台计算机。在你完成这个向导之后会启用。你可以通过用右键单击此连接的图标并选择“属性”来配置端口速度和其他属性。 |
This serial port is not enabled for use in a direct connection to another computer. It will be enabled after you complete this wizard. You can then configure the port speed and other properties by right-clicking the icon for this connection and selecting Properties. |
| 7394 | 你输入的 IP 地址池无效。 | The IP address pool you've entered is invalid. |
| 7395 | 提供的掩码无效。 | The mask provided is invalid. |
| 7396 | 为此 TCP/IP 池输入的起始地址无效。它必须在 1.0.0.0 和 224.0.0.0 之间，而且不能为格式 127.x.x.x。 | The start address entered for the TCP/IP pool is invalid. It must lie between 1.0.0.0 and 224.0.0.0 and it must not be in the form 127.x.x.x. |
| 7397 | 输入的 TCP/IP 池无效，因为地址比掩码更具体。 | The TCP/IP pool entered is invalid because the address is more specific than the mask. |
| 7398 | 起始地址必须比结束地址小。 | The start address must be less than the end address. |
| 7399 | 路由和远程访问服务正在停止。在它停止前，传入连接选项不可用。请稍等，然后再重试。 | The Routing and Remote Access Service is in the process of stopping. Until it stops, the Incoming Connections option is not available. Please wait a few moments and retry. |
| 7400 | %s (%s) | %s (%s) |
| 7401 | %s (%d 条信道) | %s (%d channels) |
| 7403 | 必须启用至少一个 Internet 协议。 | You must enable at least one Internet Protocol. |
| 7406 | 你没有足够的特权来设置传入连接 | You do not have sufficient privileges to set up Incoming Connections |
| 7410 | 允许访问(&A) | &Allow access |
| 7411 | 无效 IPv6 前缀 | Invalid IPv6 prefix |
| 29900 | 无法加载远程访问连接管理器服务。 | Cannot load the Remote Access Connection Manager service. |
| 29901 | 无法在 system32 目录中加载文件 MPRAPI.DLL。 | Cannot load the file MPRAPI.DLL in the system32 directory. |
| File Description: | 远程访问公用对话框 API |
| File Version: | 10.0.15063.0 (WinBuild.160101.0800) |
| Company Name: | Microsoft Corporation |
| Internal Name: | rasdlg.dll |
| Legal Copyright: | © Microsoft Corporation. All rights reserved. |
| Original Filename: | rasdlg.dll.mui |
| Product Name: | Microsoft® Windows® Operating System |
| Product Version: | 10.0.15063.0 |
| Translation: | 0x804, 1200 |