| 100 | 保存的打印队列 %ws |
Saved print queue %ws |
| 101 | 由于具有相同名称(或相同共享名称)的队列已经存在而跳过的打印队列 %ws |
Skipped print queue %ws because a queue with the same name (or same share name) already exists |
| 102 | 恢复的打印队列 %ws |
Restored print queue %ws |
| 103 | 无法保存打印队列 %ws。错误 0x%x |
Failed to save print queue %ws. Error 0x%x |
| 104 | 无法恢复打印队列 %ws。错误 0x%x |
Failed to restore print queue %ws. Error 0x%x |
| 105 | 正在保存打印队列... |
Saving Print Queues... |
| 106 | 正在恢复打印队列... |
Restoring Print Queues... |
| 107 | 保存的打印机端口 %ws，%ws |
Saved printer port %ws, %ws |
| 108 | 端口 %ws 已从 LPR 转换为 SPM |
Port %ws was converted from LPR to SPM |
| 109 | 无法将端口 %ws 从 LPR 转换为 SPM。错误 0x%x |
Failed to convert port %ws from LPR to SPM. Error 0x%x |
| 110 | 恢复的打印机端口 %ws，%ws |
Restored printer port %ws, %ws |
| 111 | 无法保存打印机端口 %ws，%ws。错误 0x%x |
Failed to save printer port %ws, %ws. Error 0x%x |
| 112 | 无法恢复打印机端口 %ws，%ws。错误 0x%x |
Failed to restore printer port %ws, %ws. Error 0x%x |
| 113 | 正在保存打印机端口... |
Saving Printer Ports... |
| 114 | 正在恢复打印端口... |
Restoring Printer Ports... |
| 115 | 保存的打印机驱动程序 %ws，%ws，%u |
Saved printer driver %ws, %ws, %u |
| 116 | 恢复的打印机驱动程序 %ws，%ws，%u |
Restored printer driver %ws, %ws, %u |
| 117 | 无法保存打印机驱动程序 %ws，%ws，%u。错误 0x%x |
Failed to save printer driver %ws, %ws, %u. Error 0x%x |
| 118 | 无法恢复打印机驱动程序 %ws，%ws，%u。
错误 0x%x |
Failed to restore printer driver %ws, %ws, %u. Error 0x%x |
| 119 | 正在保存打印机驱动程序... |
Saving Printer Drivers... |
| 120 | 正在恢复打印机驱动程序... |
Restoring Printer Drivers... |
| 121 | 保存的打印处理器 %ws，%ws，%ws |
Saved print processor %ws, %ws, %ws |
| 122 | 恢复的打印处理器 %ws，%ws，%ws |
Restored print processor %ws, %ws, %ws |
| 123 | 无法保存打印处理器 %ws，%ws，%ws。错误 0x%x |
Failed to save print processor %ws, %ws, %ws. Error 0x%x |
| 124 | 无法恢复打印处理器 %ws，%ws，%ws。错误 0x%x |
Failed to restore print processor %ws, %ws, %ws. Error 0x%x |
| 125 | 正在保存打印处理器... |
Saving Print Processors... |
| 126 | 正在恢复打印处理器... |
Restoring Print Processors... |
| 0x10000001 | 打印 BRM |
Print BRM |
| 0x10000002 | 打印列队 |
Print Queue |
| 0x10000003 | 打印驱动程序 |
Print Driver |
| 0x10000004 | 打印处理器 |
Print Processor |
| 0x10000005 | 打印机语言监视器 |
Printer Language Monitor |
| 0x10000006 | 打印纸张规格 |
Print Form |
| 0x10000007 | 打印机端口 |
Printer Port |
| 0x3000000A | 打印 BRM 操作成功 |
Print BRM operation success |
| 0x3000000B | 打印 BRM 操作失败 |
Print BRM operation failure |
| 0x50000002 | 错误 |
Error |
| 0x50000003 | 警告 |
Warning |
| 0x50000004 | 信息 |
Information |
| 0x70000001 | 备份 |
Backup |
| 0x70000002 | 还原 |
Restore |
| 0x70000003 | 常规操作 |
General operation |
| 0x90000001 | Microsoft-Windows-PrintBRM |
Microsoft-Windows-PrintBRM |
| 0x90000002 | Admin |
Admin |
| 0xB0000001 | Printbrm.exe (打印机迁移向导或命令行工具)正在开始备份打印队列。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) is beginning a backup of print queues. No user action is required. |
| 0xB0000002 | Printbrm.exe (打印机迁移向导或命令行工具)正在开始还原打印队列。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) is beginning a restore of print queues. No user action is required. |
| 0xB0000003 | Printbrm.exe (打印机迁移向导或命令行工具)已使用队列 %3 的 %2 替代驱动程序映射设置 %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) replaced driver map settings %1 with %2 for queue %3. No user action is required. |
| 0xB0000004 | 将在无分隔页的情况下还原打印机队列 %1。Printbrm.exe (打印机迁移向导或命令行工具)无法创建此队列的分隔文件。错误: %2 |
Printer queue %1 will be restored without a separator page. Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to create a separator file for this queue. Error: %2 |
| 0xB0000005 | Printbrm.exe (打印机迁移向导或命令行工具)找不到配置文件，正在使用默认设置。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not find a configuration file and is using the default settings. No user action is required. |
| 0xB0000006 | Printbrm.exe(打印机迁移向导或命令行工具)已成功还原打印列队 %1。无需用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully restored print queue %1. No user action is required. |
| 0xB0000007 | Printbrm.exe (打印机迁移向导或命令行工具)已还原队列 %1，但无法还原打印机驱动程序设置。错误 %2。如果目标服务器上的驱动程序比迁移文件中的驱动程序新，则可能出现这种情况。请在目标计算机上打开打印机“属性”对话框，并手动指定相应的打印机设置。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) restored queue %1, but failed to restore printer driver settings. Error %2. This can occur if the driver on the destination server is newer than the driver in the migration file. Open the printer Properties dialog box on the destination computer and manually specify the appropriate printer settings. |
| 0xB0000008 | 尝试将打印机发布到 Active Directory 目录服务时，Printbrm.exe (打印机迁移向导或命令行工具)可能无法调整 %1 的发布设置。如果 Printbrm.exe 无法访问 Active Directory，则可能出现这种情况。请使用打印机“属性”对话框手动发布打印机。 |
While attempting to publish the printer to the Active Directory directory service, Printbrm.exe (the Printer Migration Wizard or the command-line tool) may have failed to adjust publishing settings for %1. This can occur if Printbrm.exe cannot access Active Directory. Manually publish the printer using the printer Properties dialog box. |
| 0xB0000009 | 目标计算机上已存在打印机队列 %1。Printbrm.exe (打印机迁移向导或命令行工具)将更新打印机设置，以便与源计算机上的设置相匹配。无需任何用户操作。 |
Printer queue %1 already exists on the destination computer. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will update the printer settings to match the settings on the source computer. No user action is required. |
| 0xB000000A | 目标计算机上已存在打印机队列 %1 并且无法进行更改，因为 Printbrm.exe (打印机迁移向导或命令行工具)是以“保留现有”模式运行。无需任何用户操作。 |
Printer queue %1 already exists on the destination computer and will not be changed because Printbrm.exe (the Printer Migration Wizard or the command-line tool) was run in 'Keep Existing' mode. No user action is required. |
| 0xB000000B | 由于端口 %2 未知，Printbrm.exe (打印机迁移向导或命令行工具)无法还原打印队列 %1。Printbrm.exe 将转而尝试还原端口 FILE: 上的打印队列。如果备份文件包含的端口数据不完整，或者端口或端口设置与目标计算机上安装的 Windows 版本不兼容，则可能出现这种情况。请在目标计算机上重新创建受影响的端口，然后更改打印队列以使用新端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore print queue %1 because port %2 is unknown. Printbrm.exe will attempt to restore the print queue on port FILE: instead. This can occur if the backup file contains incomplete data about the port, or if the port or port settings are incompatible with the version of Windows installed on the destination computer. Recreate the affected port on the destination computer and then change the print queue to use the new port. |
| 0xB000000C | Printbrm.exe (打印机迁移向导或命令行工具)已成功在端口 FILE: 上安装打印机队列 %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully installed printer queue %1 on port FILE:. No user action is required. |
| 0xB000000D | Printbrm.exe (打印机迁移向导或命令行工具)无法在端口 FILE: 上还原打印机队列 %1。错误 %2。如果备份文件包含的端口数据不完整，或者端口或端口设置与目标计算机上安装的 Windows 版本不兼容，则可能出现这种情况。请在目标计算机上重新创建受影响的端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore printer queue %1 on port FILE:. Error %2. This can occur if the backup file contains incomplete data about the port, or if the port or port settings are incompatible with the version of Windows installed on the destination computer. Recreate the affected port on the destination computer. |
| 0xB000000E | Printbrm.exe (打印机迁移向导或命令行工具)已成功还原 %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully restored %1. No user action is required. |
| 0xB000000F | 从文件中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法还原打印处理器 %1。错误: %2。请检查此事件返回的 Windows 错误以确定原因。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore print processor %1 while restoring print queues from a file. Error: %2. Examine the Windows error returned by this event to determine the cause. |
| 0xB0000010 | Printbrm.exe (打印机迁移向导或命令行工具)无法备份语言监视器的依存文件。依存文件: %1。错误: %2。如果已删除或移动该文件，则可能出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not back up a dependent file for a language monitor. Dependent file: %1. Error: %2. This can occur if the file was deleted or moved. |
| 0xB0000011 | Printbrm.exe (打印机迁移向导或命令行工具)已成功还原语言监视器 %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully restored language monitor %1. No user action is required. |
| 0xB0000012 | 从文件中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法还原语言监视器 %1。请检查打印队列备份文件，并检查此事件返回的 Windows 错误以确定原因。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not restore language monitor %1 while restoring print queues from a file. Check the print queue backup file and examine the Windows error returned by this event to determine the cause. |
| 0xB0000013 | 备份文件中的语言监视器所适用的处理器体系结构与目标计算机不同。Printbrm.exe (打印机迁移向导或命令行工具)将不会迁移任何语言监视器。源体系结构: %1。目标体系结构: %2。 |
The language monitors in the backup file are for a different processor architecture than the destination computer. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will not migrate any language monitors. Source architecture: %1. Destination architecture: %2. |
| 0xB0000014 | Printbrm.exe (打印机迁移向导或命令行工具)已还原体系结构与目标计算机不同的处理器的驱动程序。Printbrm.exe 将尝试在目标 %2 上查找并安装驱动程序 %1 的本机版本。请尝试打印到打印队列，并手动安装驱动程序的本机版本(如有必要)。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) restored a driver for a different processor architecture than that of the destination computer. Printbrm.exe will attempt to locate and install a native version of driver %1 on destination %2. Try to print to the print queue, and if necessary, manually install a native version of the driver. |
| 0xB0000015 | Printbrm.exe (打印机迁移向导或命令行工具)已成功安装目标计算机的处理器体系结构的驱动程序 %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully installed driver %1 for the processor architecture of the destination computer. No user action is required. |
| 0xB0000016 | 备份文件中的驱动程序适用的处理器体系结构与目标计算机不同，而 Printbrm.exe (打印机迁移向导或命令行工具)无法查找并安装本机版本的驱动程序。驱动程序: %1。目标体系结构: %2。错误: %3。请在目标计算机上安装驱动程序的本机版本，然后重新尝试导入打印队列。 |
The driver in the backup file is for a different processor architecture than the destination computer, and Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not locate and install a native version of the driver. Driver: %1. Destination architecture: %2. Error: %3. Install a native version of the driver on the destination computer and then retry importing the print queues. |
| 0xB0000017 | Printbrm.exe (打印机迁移向导或命令行工具)已成功从 Cabinet (.cab)文件中安装驱动程序 %1 (%2)。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully installed driver %1 (%2) from a cabinet (.cab) file. No user action is required. |
| 0xB0000018 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原驱动程序 %1 (%2)，因为在源计算机上备份时未包含其二进制文件。Printbrm.exe 无法从目标计算机的本地驱动程序 Cabinet (.cab)文件中安装驱动程序。错误: %3。如果用户在备份打印队列时未保存驱动程序二进制文件，或者在使用与源计算机不同的处理器体系结构的目标计算机上还原打印队列，则可能出现这种情况。请在目标计算机上手动安装驱动程序，或使用其二进制文件备份打印队列。然后重新尝试导入打印队列。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not restore driver %1 (%2) because it was backed up on the source computer without its binary files. Printbrm.exe could not install the driver from the local driver cabinet (.cab) file on the destination computer. Error: %3. This can occur if the user did not save the driver binary files while backing up the print queue, or when restoring a print queue on a destination computer that uses a different processor architecture than the source computer. Install the driver manually on the destination computer or back up the print queue with its binary files. Then, retry importing the print queues. |
| 0xB0000019 | Printbrm.exe (打印机迁移向导或命令行工具)已成功从文件中安装驱动程序 %1 (%2)。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully installed driver %1 (%2) from files. No user action is required. |
| 0xB000001A | Printbrm.exe (打印机迁移向导或命令行工具)无法从文件中还原驱动程序 %1 (%2)。报告的错误: %3。如果 Printbrm.exe 未备份驱动程序需要使用的文件 ，或者用户没有在目标计算机上安装驱动程序的权限，则可能出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not restore driver %1 (%2) from files. Error reported: %3. This can occur if the driver requires a file that Printbrm.exe did not back up or if the user does not have permission to install drivers on the destination computer. |
| 0xB000001B | Printbrm.exe (打印机迁移向导或命令行工具)无法删除驱动程序临时文件夹 %1。错误 %2。请手动删除临时文件和文件夹。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to remove driver temporary folder %1. Error %2. Manually delete the temporary files and folder. |
| 0xB000001C | Printbrm.exe (打印机迁移向导或命令行工具)无法将 %1 复制到 %2。从文件中还原打印队列时出现错误 %3。如果用户在目标计算机上没有适当的权限、备份文件已损坏或系统不稳定，则可能出现这种情况。请在源计算机上重新尝试导出打印机队列。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to copy %1 to %2. Error %3 occurred while it was restoring print queues from a file. This can occur if the user does not have proper permissions on the destination computer, if the backup file is corrupted, or if the system is unstable. Retry exporting the printer queues on the source computer. |
| 0xB000001D | Printbrm.exe (打印机迁移向导或命令行工具)无法将行式打印机远程工具(LPR)端口 %1 转换为标准 TCP/IP 打印机端口。无法获取设备设置。错误 %2。如果未正确配置 LPR 端口，则可能出现这种情况。请为打印机手动创建标准 TCP/IP 打印机端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not convert Line Printer Remote (LPR) port %1 to a standard TCP/IP printer port. Cannot get device settings. Error %2. This can occur if the LPR port was incorrectly configured. Manually create a standard TCP/IP printer port for the printer. |
| 0xB000001E | Printbrm.exe (打印机迁移向导或命令行工具)无法还原行式打印机远程工具(LPR)打印机端口 %1，因为该端口名称的长度太长。长度 = MAX_PORTNAME_LEN: 错误 %2。如果备份文件包含的端口数据不完整，或者端口或端口设置与目标计算机上安装的 Windows 版本不兼容，则可能出现这种情况。请在目标计算机上重新创建受影响的端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore the Line Printer Remote (LPR) printer port %1 because the length of the port name is too long. len = MAX_PORTNAME_LEN: Error %2. This can occur if the backup file contains incomplete data about the port, or if the port or port settings are incompatible with the version of Windows installed on the destination computer. Recreate the affected port on the destination computer. |
| 0xB000001F | 端口 %1 已存在。Printbrm.exe (打印机迁移向导或命令行工具)将跳过对该端口的还原操作。无需任何用户操作。 |
Port %1 already exists. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will skip restoring this port. No user action is required. |
| 0xB0000020 | Printbrm.exe (打印机迁移向导或命令行工具)端口安装状态: %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) port install status: %1. No user action is required. |
| 0xB0000021 | Printbrm.exe (打印机迁移向导或命令行工具)正在备份打印机表单。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) is backing up printer forms. No user action is required. |
| 0xB0000022 | Printbrm.exe (打印机迁移向导或命令行工具)正在还原打印机表单。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) is restoring printer forms. No user action is required. |
| 0xB0000023 | Printbrm.exe (打印机迁移向导或命令行工具)已成功保存 %1 用户表单。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully saved %1 user forms. No user action is required. |
| 0xB0000024 | Printbrm.exe (打印机迁移向导或命令行工具)找不到任何要还原的用户表单。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not find any user forms to restore. No user action is required. |
| 0xB0000025 | Printbrm.exe (打印机迁移向导或命令行工具)无法从备份文件中还原一个或多个打印机表单。如果目标计算机上已存在这些表单，或者用户在目标计算机上没有创建表单的权限，则可能出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not restore one or more printer forms from the backup file. This can occur if the forms already exist on the destination computer or if the user does not have permissions to create forms on the destination computer. |
| 0xB0000026 | 从文件中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法加载 .xml 文件 %1。错误: %2。如果用户在目标计算机上没有适当的权限、备份文件已损坏或系统不稳定，则可能出现这种情况。请在源计算机上重新尝试导出打印机队列。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not load .xml file %1 while restoring print queues from a file. Error: %2. This can occur if the user does not have proper permissions on the destination computer, if the backup file is corrupted, or if the system is unstable. Retry exporting the printer queues on the source computer. |
| 0xB0000027 | Printbrm.exe (打印机迁移向导或命令行工具)找不到适用于打印处理器 %2 的打印机驱动程序迁移插件 DLL %1。Printbrm.exe 将跳过此文件并尝试迁移驱动程序，但打印机可能无法正常工作。这可能是因为打印机驱动程序提供的迁移插件有问题。请尝试打印到受影响的打印机并安装较新版本的驱动程序(如有必要)。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not find the printer driver migration plug-in DLL %1 for print processor %2. Printbrm.exe will skip this file and attempt to migrate the driver, but the printer might not work. This can occur due to a problem with the migration plug-in provided by the printer driver. Try to print to the affected printer and install a newer version of the driver, if necessary. |
| 0xB0000028 | Printbrm.exe (打印机迁移向导或命令行工具)将后台处理程序文件夹更改为: %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) changed the spooler folder to: %1. No user action is required. |
| 0xB0000029 | Printbrm.exe (打印机迁移向导或命令行工具)已成功还原打印队列，但无法将后台处理程序文件夹更改为 %1。此路径不存在，因此 Printbrm.exe 使用了默认后台处理程序文件夹位置(%WINDIR%\\System32\\Spool\\Printers)。如果源计算机的配置与目标计算机不同，则可能出现这种情况。除非要使用自定义后台处理程序文件夹位置，否则，无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully restored the print queue, but could not change spooler folder to %1. This path does not exist, so Printbrm.exe used the default spooler folder location (%WINDIR%\\System32\\Spool\\Printers). This can occur if the configuration of the source computer is different from the destination computer. No user action is required unless you want to use a custom spooler folder location. |
| 0xB000002A | Printbrm.exe (打印机迁移向导或命令行工具)已成功还原打印队列，但无法更改后台处理程序文件夹位置。错误 %1。Printbrm.exe 使用了默认后台处理程序文件夹位置(%WINDIR%\\System32\\Spool\\Printers)。如果源计算机的配置与目标计算机不同，则可能出现这种情况。除非要使用自定义后台处理程序文件夹位置，否则，无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully restored the print queue, but could not change the location of the spooler folder. Error %1. Printbrm.exe used the default spooler folder location (%WINDIR%\\System32\\Spool\\Printers). This can occur if the configuration of the source computer is different from the destination computer. No user action is required unless you want to use a custom spooler folder location. |
| 0xB000002B | Printbrm.exe (打印机迁移向导或命令行工具)将后台处理程序日志级别更改为: %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) changed the spooler log level to: %1. No user action is required. |
| 0xB000002C | Printbrm.exe (打印机迁移向导或命令行工具)已成功还原打印队列，但无法更改后台处理程序日志级别。报告的错误: %1。除非要更改默认后台处理程序日志级别，否则，无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully restored the print queue, but could not change the spooler log level. Error reported: %1. No user action is required unless you want to change the default spooler log level. |
| 0xB000002D | Printbrm.exe (打印机迁移向导或命令行工具)正在备份服务器上的打印机对象: %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) is backing up printer objects on server: %1. No user action is required. |
| 0xB000002E | 在备份打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法将文件放入 Cabinet (CAB)文件 %1 中。报告的错误: %2。如果用户没有在目标位置创建文件的权限，或者磁盘空间或系统资源不足，则可能出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to place a file in cabinet (CAB) file %1 while backing up print queues. Error reported: %2. This can occur if the user does not have permission to create a file in the destination location, or if there is insufficient disk space or system resources. |
| 0xB000002F | 在备份打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法创建目标文件 %1。报告的错误: %2。如果用户没有在目标位置创建文件的权限，或者磁盘空间或系统资源不足，则可能出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to create destination file %1 while backing up print queues. Error reported: %2. This can occur if the user does not have permission to create a file in the destination location, or if there is insufficient disk space or system resources. |
| 0xB0000030 | Printbrm.exe (打印机迁移向导或命令行工具)无法加载打印机驱动程序迁移插件 DLL %1。错误: %2。Printbrm.exe 将尝试迁移驱动程序，但打印机可能会由于缺少文件而无法正常工作。这可能是因为打印机驱动程序提供的迁移插件有问题。请尝试打印到受影响的打印机并安装较新版本的驱动程序(如有必要)。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not load printer driver migration plug-in DLL %1. Error: %2. Printbrm.exe will attempt to migrate the driver, but the printer might not work because of missing files. This can occur due to a problem with the migration plug-in provided by the printer driver. Try to print to the affected printer and install a newer version of the driver, if necessary. |
| 0xB0000031 | 打印机驱动程序迁移插件 %1 与此版本的 Windows 不兼容。Printbrm.exe (打印机迁移向导或命令行工具)将尝试迁移驱动程序，但打印机可能由于缺少文件而无法正常工作。这可能是因为打印机驱动程序提供的迁移插件有问题。请尝试打印到受影响的打印机并安装较新版本的驱动程序(如有必要)。 |
The printer driver migration plug-in %1 is incompatible with this version of Windows. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will attempt to migrate the driver, but the printer might not work because of missing files. This can occur due to a problem with the migration plug-in provided by the printer driver. Try to print to the affected printer and install a newer version of the driver, if necessary. |
| 0xB0000032 | 打印机驱动程序迁移插件 %1 运行时出现错误: %2。Printbrm.exe (打印机迁移向导或命令行工具)将尝试迁移驱动程序，但打印机可能由于缺少文件而无法正常工作。这可能是因为打印机驱动程序提供的迁移插件有问题。请尝试打印到受影响的打印机并安装较新版本的驱动程序(如有必要)。 |
The printer driver migration plug-in %1 ran with error: %2. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will attempt to migrate the driver, but the printer might not work because of missing files. This can occur due to a problem with the migration plug-in provided by the printer driver. Try to print to the affected printer and install a newer version of the driver, if necessary. |
| 0xB0000033 | Printbrm.exe (打印机迁移向导或命令行工具)已成功运行打印机驱动程序迁移插件 %1。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully ran printer driver migration plug-in %1. No user action is required. |
| 0xB0000034 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原打印处理器 %1，因为它已安装在目标计算机上。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not restore print processor %1 because it is already installed on the destination computer. No user action is required. |
| 0xB0000035 | 当 Printbrm.exe (打印机迁移向导或命令行工具)从备份中还原打印队列时，计算机 %2 上的以下服务控制函数 %1 返回错误 %3。如果 Printbrm.exe 找不到打印处理器的所有文件、无法停止打印后台处理程序或群集服务，或者在安装打印处理器的过程中任一服务没有响应，则可能出现这种情况。如果打印失败，请在目标计算机上手动安装打印处理器，并检查打印后台处理程序服务和/或群集服务。 |
While Printbrm.exe (the Printer Migration Wizard or the command-line tool) was restoring a print queue from backup, the following service control function %1 on computer %2 returned error %3. This can occur if Printbrm.exe cannot locate all files for a print processor, cannot stop the print spooler or the Cluster service, or if either of these services become unresponsive during installation of the print processor. If printing fails, manually install the print processor on the destination computer and examine the Print Spooler service and/or the Cluster service. |
| 0xB0000036 | 服务 %1 现在正在服务器 %2 上运行。无需任何用户操作。 |
The service %1 is now running on server %2. No user action is required. |
| 0xB0000037 | 服务 %1 现在已在服务器 %2 上停止。无需任何用户操作。 |
The service %1 is now stopped on server %2. No user action is required. |
| 0xB0000038 | 从备份中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法在计算机 %2 上停止服务 %1。错误 %3。请尝试打印到受影响的打印机以确定是否有问题。 |
While restoring a print queue from backup, Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to stop service %1 on computer %2. Error %3. Try printing to the affected printer to determine if there is a problem. |
| 0xB0000039 | 从备份中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法在计算机 %2 上启动服务 %1。错误 %3。请尝试打印到受影响的打印机以确定是否有问题。 |
While restoring a print queue from backup, Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to start service %1 on computer %2. Error %3. Try printing to the affected printer to determine if there is a problem. |
| 0xB000003A | Printbrm.exe (打印机迁移向导或命令行工具)未覆盖打印处理器文件 %1，因为目标系统上的文件具有完全相同(或较新)的时间戳。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) did not overwrite print processor file %1 because the file on the destination system has an identical (or newer) time stamp. No user action is required. |
| 0xB000003B | Printbrm.exe (打印机迁移向导或命令行工具)将打印处理器文件 %1 复制到 %2。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) copied print processor file %1 to %2. No user action is required. |
| 0xB000003C | 从备份中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法将打印处理器文件 %1 复制到 %2。错误 %3。如果 Printbrm.exe 找不到打印队列的所有文件，或者在安装打印处理器的过程中无法停止打印后台处理程序服务，则可能出现这种情况。如果打印失败，请在目标计算机上手动安装打印处理器。 |
While restoring a print queue from backup, Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to copy print processor file %1 to %2. Error %3. This can occur if Printbrm.exe cannot locate all files for a print queue, or if the Print Spooler service cannot be stopped during installation of the print processor. If printing fails, manually install the print processor on the destination computer. |
| 0xB000003D | 设备 %1 %2 支持多个端口。Printbrm.exe (打印机迁移向导或命令行工具)会将设备上的第一个端口从行式打印机远程工具(LPR)端口转换为标准 TCP/IP 端口。可能需要重新配置设备上的端口。 |
The device %1 %2 supports more than one port. Printbrm.exe (the Printer Migration Wizard or the command-line tool) will convert the first port on the device from a Line Printer Remote (LPR) port to a standard TCP/IP port. The port on the device might need to be reconfigured. |
| 0xB000003E | Printbrm.exe (打印机迁移向导或命令行工具)无法还原行式打印机远程工具(LPR)端口 %1，因为目标计算机上未安装 LPR 端口监视器。请在目标计算机上安装 LPR 端口监视器。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore the Line Printer Remote (LPR) port %1 because the LPR port monitor is not installed on the destination computer. Install the LPR port monitor on the destination computer. |
| 0xB000003F | 从以前创建的备份文件中还原打印队列时，Printbrm.exe (打印机迁移向导或命令行工具)无法还原行式打印机远程工具(LPR)端口 %1。错误代码: %2。如果备份文件包含的端口数据不完整，或者端口或端口设置与目标计算机上安装的 Windows 版本不兼容，则可能出现这种情况。请在目标计算机上重新创建受影响的端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore the Line Printer Remote (LPR) port %1 while restoring print queues from a previously created backup file. Error code: %2. This can occur if the backup file contains incomplete data about the port, or if the port or port settings are incompatible with the version of Windows installed on the destination computer. Recreate the affected port on the destination computer. |
| 0xB0000040 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原标准 TCP/IP 打印机端口 %1。错误: %2。如果备份文件包含的端口数据不完整，或者端口或端口设置与目标计算机上安装的 Windows 版本不兼容，则可能出现这种情况。请在目标计算机上重新创建受影响的端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore the standard TCP/IP printer port %1. Error: %2. This can occur if the backup file contains incomplete data about the port, or if the port or port settings are incompatible with the version of Windows installed on the destination computer. Recreate the affected port on the destination computer. |
| 0xB0000041 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原打印机驱动程序设置(%1, %2)。错误 %3。如果目标服务器上的驱动程序比迁移文件中的驱动程序新，则可能出现这种情况。请在目标计算机上打开打印机“属性”对话框，然后手动指定相应的打印机设置。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore printer driver settings (%1, %2). Error %3. This can occur if the driver on the destination server is newer than the driver in the migration file. Open the printer Properties dialog box on the destination computer and manually specify the appropriate printer settings. |
| 0xB0000042 | Printbrm.exe (打印机迁移向导或命令行工具)无法应用打印机队列 %1 的新设置，因为目标服务器上不存在 Cabinet (.cab)文件中保存的端口 %2。如果 Printbrm.exe 无法迁移该端口，则可能出现这种情况。请手动安装相应端口，然后指定相应的打印机设置或重新尝试导入打印队列。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) cannot apply new settings for printer queue %1 because port %2 that is saved in the cabinet (.cab) file does not exist on the destination server. This can occur if Printbrm.exe failed to migrate the port. Manually install the appropriate port, and then specify the appropriate printer settings or retry importing the print queue. |
| 0xB0000043 | Printbrm.exe (打印机迁移向导或命令行工具)无法打开注册表项 %1。错误代码 %2。如果某个重要的 Windows 资源(如注册表)不可用、无法初始化组件对象模型(COM)或 Printbrm.exe 无法分配内存，则可能出现这种情况。请检查此事件返回的 Windows 错误以确定原因。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not open registry key %1. Error code %2. This can occur if an important Windows resource (such as the registry) is unavailable, if the Component Object Model (COM) cannot be initialized, or if Printbrm.exe cannot allocate memory. Examine the Windows error returned by this event to determine the cause. |
| 0xB0000044 | Printbrm.exe (打印机迁移向导或命令行工具)无法在此位置创建 Cabinet (CAB)文件: %1。报告的错误: %2。如果用户没有在目标位置创建文件的权限，或者磁盘空间或系统资源不足，则可能出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not create a cabinet (CAB) file at this location: %1. Error reported: %2. This can occur if the user does not have permission to create a file in the destination location, or if there is insufficient disk space or system resources. |
| 0xB0000045 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原标准 TCP/IP 打印机端口 %2，因为主机 IP 地址 %1 的长度太长，无法在 Windows Vista 以前版本的操作系统上还原。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore the standard TCP/IP printer port %2 because the length of the host IP address %1 is too long to be restored on operating systems older than Windows Vista. |
| 0xB0000046 | Printbrm.exe (打印机迁移向导或命令行工具)无法保存分隔文件 %1，因为此文件或路径不存在。如果无法在源计算机上的备份过程中找到分隔页，则可能会出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to save separator file %1 because the file or path does not exist. This can occur when a separator page cannot be found during the backup process on the source computer. |
| 0xB0000047 | Printbrm.exe (打印机迁移向导或命令行工具)无法访问 %1 上的 print$ 共享。报告的错误: %2。如果目标计算机没有任何共享打印机，则可能会出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not access the print$ share on %1. Error reported: %2. This can occur if the destination computer does not have any shared printers. |
| 0xB0000048 | Printbrm.exe (打印机迁移向导或命令行工具)无法访问 %1 上的远程注册表服务。报告的错误: %2。如果未启动远程注册表服务或计算机受防火墙保护，则可能会出现这种情况。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) was unable to access the Remote Registry service on %1. Error reported: %2. This can occur if the Remote Registry service is not started or if the computer is behind a firewall. |
| 0xB0000049 | 由于 StartTime 或 UntilTime 值无效，Printbrm.exe (打印机迁移向导或命令行工具)重置了打印队列的可用性信息。错误 %1。在使用打印机“属性”对话框的“高级”选项卡指定正确的可用性之前，打印机将始终可用。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) reset the availability information for the print queue because the StartTime or UntilTime values were invalid. Error %1. The printer will be always available until you use the Advanced tab of the printer's Properties dialog box to specify the correct availability. |
| 0xB000004A | Printbrm.exe (打印机迁移向导或命令行工具)已成功从驱动程序包中安装驱动程序 %1 (%2)。无需任何用户操作。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) successfully installed driver %1 (%2) from a driver package. No user action is required. |
| 0xB000004B | Printbrm.exe (打印机迁移向导或命令行工具)无法从驱动程序包中还原驱动程序 %1 (%2)。错误: %3。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) could not restore driver %1 (%2) from a driver package. Error: %3. |
| 0xB000004C | Printbrm.exe (打印机迁移向导或命令行工具)无法备份驱动程序 %1 (%2)。备份过程将继续，并跳过该驱动程序。错误: %3。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to backup driver %1 (%2). The backup process will continue, skipping this driver. Error: %3. |
| 0xB000004D | Printbrm.exe (打印机迁移向导或命令行工具)无法备份端口 %1。备份过程将继续，并跳过该端口。错误: %2。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to backup port %1. The backup process will continue, skipping this port. Error: %2. |
| 0xB000004E | Printbrm.exe (打印机迁移向导或命令行工具)无法备份打印处理器 %1 (%2)。错误: %3。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to back up print processor %1 (%2). Error: %3. |
| 0xB000004F | Printbrm.exe (打印机迁移向导或命令行工具)无法备份体系结构 %1 的打印处理器文件。错误: %2。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to back up print processor files for architecture %1. Error: %2. |
| 0xB0000050 | Printbrm.exe (打印机迁移向导或命令行工具)无法备份打印队列 %1。备份过程将继续，并跳过该队列。错误: %2。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to back up print queue %1. The backup process will continue, skipping this queue. Error: %2. |
| 0xB0000051 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原打印队列 %1。还原过程将继续，并跳过该队列。错误: %2。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore print queue %1. The restore process will continue, skipping this queue. Error: %2. |
| 0xB0000052 | 在还原打印队列 %1 时，Printbrm.exe (打印机迁移向导或命令行工具)无法创建新的分隔文件的文件夹。如果用户没有在目标位置创建文件的权限，或者磁盘空间或系统资源不足，则可能会出现这种情况。未成功还原打印队列。错误: %2。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to create a new separator file folder while restoring print queue %1. This can occur if the user does not have permission to create a file in the destination location, or if there is insufficient disk space or system resources. The print queue was not restored successfully. Error: %2. |
| 0xB0000053 | Printbrm.exe (打印机迁移向导或命令行工具)无法还原由远程 URL 或全局标识符 %1 描述的 WSD 打印机端口。错误: %2。如果备份文件包含的端口数据不完整，或者端口或端口设置与目标计算机上安装的 Windows 版本不兼容，则可能出现这种情况。请在目标计算机上重新创建受影响的端口。 |
Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to restore the WSD printer port described by the remote URL or global identifier %1. Error: %2. This can occur if the backup file contains incomplete data about the port, or if the port or port settings are incompatible with the version of Windows installed on the destination computer. Recreate the affected port on the destination computer. |