wwancfg.dll.mui MBN Netsh Helper DLL a4e70b51f1bde961c86275f7d2b8b7f6

File info

File name: wwancfg.dll.mui
Size: 82944 byte
MD5: a4e70b51f1bde961c86275f7d2b8b7f6
SHA1: 070a2cb00f2fa6e3f591b1e4a92415aed7319f96
SHA256: 220197fa63019b514f74d07abbc75d9cc0fe52c1a541a82347275d579bd105b7
Operating systems: Windows 10
Extension: MUI

Translations messages and strings

If an error occurred or the following message in English (U.S.) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id English (U.S.) English
1000Adds a configuration entry to a table.
Adds a configuration entry to a table.
1001Displays information.
Displays information.
1002Deletes a configuration entry from a table.
Deletes a configuration entry from a table.
1003Sets configuration information.
Sets configuration information.
1010Connects to a Mobile Broadband network.
Connects to a Mobile Broadband network.
1011
Usage: %1!s! [interface=] [connmode=]tmp|name [name=]

Parameters:

Tag Value
*** *****
interface Interface Name.
connmode Specifies how connection parameters are being provided.
name Name of the profile XML file or the profile name.

Remarks:

Connect to the Mobile Broadband Network using the given profile. It is
required that device is registered before invoking this function.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter connmode specifies how the connection parameters are being
supplied. The connection can be requested using a profile XML, or
using profile name for the profile XML that has been previously
stored in Mobile Broadband Profile Data Store using "netsh mbn add
profile" command. In former case, the parameter connmode shall hold
"tmp" as value. Whereas, it shall be "name" in the latter case.

Parameter name shall specify name of the Profile XML file, if parameter
connmode is "tmp", and it shall specify name of the profile, if
parameter connmode is "name".

Examples:

%1!s! interface="Mobile Broadband Connection" connmode=tmp name=d:\profile.xml
%1!s! interface="Mobile Broadband Connection" connmode=name name=MyProfileName

Usage: %1!s! [interface=] [connmode=]tmp|name [name=]

Parameters:

Tag Value
*** *****
interface Interface Name.
connmode Specifies how connection parameters are being provided.
name Name of the profile XML file or the profile name.

Remarks:

Connect to the Mobile Broadband Network using the given profile. It is
required that device is registered before invoking this function.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter connmode specifies how the connection parameters are being
supplied. The connection can be requested using a profile XML, or
using profile name for the profile XML that has been previously
stored in Mobile Broadband Profile Data Store using "netsh mbn add
profile" command. In former case, the parameter connmode shall hold
"tmp" as value. Whereas, it shall be "name" in the latter case.

Parameter name shall specify name of the Profile XML file, if parameter
connmode is "tmp", and it shall specify name of the profile, if
parameter connmode is "name".

Examples:

%1!s! interface="Mobile Broadband Connection" connmode=tmp name=d:\profile.xml
%1!s! interface="Mobile Broadband Connection" connmode=name name=MyProfileName
1012Disconnects from a Mobile Broadband network.
Disconnects from a Mobile Broadband network.
1013
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Disconnect from the Mobile Broadband Network on the specified interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Disconnect from the Mobile Broadband Network on the specified interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1050Adds a network profile in the Profile Data Store.
Adds a network profile in the Profile Data Store.
1051
Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile XML file.

Remarks:

Add a Mobile Broadband Network Profile for the given interface for all users.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the XML file containing
the profile data.

Examples:

%1!s! interface="Mobile Broadband Connection" name="Profile1.xml"

Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile XML file.

Remarks:

Add a Mobile Broadband Network Profile for the given interface for all users.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the XML file containing
the profile data.

Examples:

%1!s! interface="Mobile Broadband Connection" name="Profile1.xml"
1052Adds a DM Config profile in the Profile Data Store.
Adds a DM Config profile in the Profile Data Store.
1053
Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile XML file.

Remarks:

Add a Mobile Broadband DM Config Profile for the given interface for all users.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the XML file containing
the profile data.

Examples:

%1!s! interface="Mobile Broadband Connection" name="Profile1.xml"

Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile XML file.

Remarks:

Add a Mobile Broadband DM Config Profile for the given interface for all users.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the XML file containing
the profile data.

Examples:

%1!s! interface="Mobile Broadband Connection" name="Profile1.xml"
1060Deletes a network profile from the Profile Data Store.
Deletes a network profile from the Profile Data Store.
1061
Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile.

Remarks:

Remove a Mobile Broadband Network Profile for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the profile that has to
be deleted.

Examples:

%1!s! interface="Mobile Broadband Connection" name="myProfileName"

Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile.

Remarks:

Remove a Mobile Broadband Network Profile for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the profile that has to
be deleted.

Examples:

%1!s! interface="Mobile Broadband Connection" name="myProfileName"
1062Deletes a DM Config profile from the Profile Data Store.
Deletes a DM Config profile from the Profile Data Store.
1063
Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile.

Remarks:

Remove a Mobile Broadband DM Config Profile for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the profile that has to
be deleted.

Examples:

%1!s! interface="Mobile Broadband Connection" name="myProfileName"

Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile.

Remarks:

Remove a Mobile Broadband DM Config Profile for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the profile that has to
be deleted.

Examples:

%1!s! interface="Mobile Broadband Connection" name="myProfileName"
1070Shows a list of profiles configured on the system.
Shows a list of profiles configured on the system.
1071
Usage: %1!s! [[name=]] [[interface=]] [[purpose=]]

Parameters:

Tag Value
*** *****
name - Name of the profile to display.
interface - Interface name.
purpose - Purpose

Remarks:

Shows the profile data or lists the profiles on the system.
Profile name and interface are both optional.

If profile name is given then the content of the profile will be
displayed. Otherwise profiles will be listed for the interface.

If interface name is given, only the specified profile on the given
interface will be listed. Otherwise, first matched profile will be
displayed.

If the purpose is provided, only profiles with the matching purpose
GUID will be displayed. Otherwise, profiles will not be filtered by
purpose. The string can either be a GUID with curly brackets or
one of the following strings: internet, supl, mms, ims, or allhost.

Examples:

%1!s! interface="Mobile Brandband Connection" purpose="{00000000-0000-0000-0000-000000000000}"
%1!s! name="profile 1" interface="Mobile Broadband Connection"
%1!s! name="profile 2"
%1!s!

Usage: %1!s! [[name=]] [[interface=]] [[purpose=]]

Parameters:

Tag Value
*** *****
name - Name of the profile to display.
interface - Interface name.
purpose - Purpose

Remarks:

Shows the profile data or lists the profiles on the system.
Profile name and interface are both optional.

If profile name is given then the content of the profile will be
displayed. Otherwise profiles will be listed for the interface.

If interface name is given, only the specified profile on the given
interface will be listed. Otherwise, first matched profile will be
displayed.

If the purpose is provided, only profiles with the matching purpose
GUID will be displayed. Otherwise, profiles will not be filtered by
purpose. The string can either be a GUID with curly brackets or
one of the following strings: internet, supl, mms, ims, or allhost.

Examples:

%1!s! interface="Mobile Brandband Connection" purpose="{00000000-0000-0000-0000-000000000000}"
%1!s! name="profile 1" interface="Mobile Broadband Connection"
%1!s! name="profile 2"
%1!s!
1072Shows the pin information for the given interface.
Shows the pin information for the given interface.
1073
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the pin information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the pin information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1074Shows the pin list information for the given interface.
Shows the pin list information for the given interface.
1075
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the pin list information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the pin list information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1076Shows the radio state information for the given interface.
Shows the radio state information for the given interface.
1077
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the radio state information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the radio state information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1078Shows the home provider information for the given interface.
Shows the home provider information for the given interface.
1079
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the home provider information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the home provider information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1080Shows the current connection information for the given interface.
Shows the current connection information for the given interface.
1081
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the current connection information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the current connection information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1082Shows the ready information for the given interface.
Shows the ready information for the given interface.
1083
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the ready information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the ready information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1084Shows the interface capability information for the given interface.
Shows the interface capability information for the given interface.
1085
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the interface capability information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the interface capability information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1086Shows the visible providers list for the given interface.
Shows the visible providers list for the given interface.
1087
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the visible providers list for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the visible providers list for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1088Shows the preferred providers list for the given interface.
Shows the preferred providers list for the given interface.
1089
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the preferred providers list for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the preferred providers list for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1090Shows the signal information for the given interface.
Shows the signal information for the given interface.
1091
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the signal information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.


Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the signal information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.


Examples:

%1!s! interface="Mobile Broadband Connection"
1092Shows the provisioned contexts information for the given interface.
Shows the provisioned contexts information for the given interface.
1093
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the provisioned contexts information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the provisioned contexts information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1094Shows a list of Mobile Broadband interfaces on the system.
Shows a list of Mobile Broadband interfaces on the system.
1095
Usage: %1!s!

Remarks:

Shows the Mobile Broadband interfaces configured on the system.
There are no parameters for this command.

Examples:

%1!s!

Usage: %1!s!

Remarks:

Shows the Mobile Broadband interfaces configured on the system.
There are no parameters for this command.

Examples:

%1!s!
1096Shows the SMS configuration information for the given interface.
Shows the SMS configuration information for the given interface.
1097
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the SMS configuration information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface - Interface name.

Remarks:

Shows the SMS configuration information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1098Shows whether Mobile Broadband tracing is enabled or disabled.
Shows whether Mobile Broadband tracing is enabled or disabled.
1099
Usage: %1!s!

Remarks:

Shows whether Mobile Broadband tracing is enabled or disabled.

Examples:

%1!s!

Usage: %1!s!

Remarks:

Shows whether Mobile Broadband tracing is enabled or disabled.

Examples:

%1!s!
1100Shows the Mobile Broadband data enablement state for the given interface.
Shows the Mobile Broadband data enablement state for the given interface.
1101
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data enablement state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data enablement state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1102Shows the Mobile Broadband data roam control state for the given interface.
Shows the Mobile Broadband data roam control state for the given interface.
1103
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data roam control state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data roam control state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1104Shows the Mobile Broadband data auto connect state for the given interface.
Shows the Mobile Broadband data auto connect state for the given interface.
1105
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data auto connect state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data auto connect state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1106Shows the state of a Mobile Broadband profile for the given interface.
Shows the state of a Mobile Broadband profile for the given interface.
1107
Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile.

Remarks:

Shows the state of a Mobile Broadband profile for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the profile that has the
state to be shown.

Examples:

%1!s! interface="Mobile Broadband Connection" name="myProfileName"

Usage: %1!s! [interface=] [name=]

Parameters:

Tag Value
*** *****
interface Interface name.
name Name of the profile.

Remarks:

Shows the state of a Mobile Broadband profile for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter name is required. It is the name of the profile that has the
state to be shown.

Examples:

%1!s! interface="Mobile Broadband Connection" name="myProfileName"
1108Shows a list of DM Config profiles configured on the system.
Shows a list of DM Config profiles configured on the system.
1109
Usage: %1!s! [[name=]] [[interface=]]

Parameters:

Tag Value
*** *****
name - Name of the profile to display.
interface - Interface name.

Remarks:

Shows the profile data or lists the profiles on the system.
Profile name and interface are both optional.

If profile name is given then the content of the profile will be
displayed. Otherwise profiles will be listed for the interface.

If interface name is given, only the specified profile on the given
interface will be listed. Otherwise, first matched profile will be
displayed.

Examples:

%1!s! name="profile 1" interface="Mobile Broadband Connection"
%1!s! name="profile 2"
%1!s!

Usage: %1!s! [[name=]] [[interface=]]

Parameters:

Tag Value
*** *****
name - Name of the profile to display.
interface - Interface name.

Remarks:

Shows the profile data or lists the profiles on the system.
Profile name and interface are both optional.

If profile name is given then the content of the profile will be
displayed. Otherwise profiles will be listed for the interface.

If interface name is given, only the specified profile on the given
interface will be listed. Otherwise, first matched profile will be
displayed.

Examples:

%1!s! name="profile 1" interface="Mobile Broadband Connection"
%1!s! name="profile 2"
%1!s!
1110Shows the Mobile Broadband network LTE attach information for the given interface.
Shows the Mobile Broadband network LTE attach information for the given interface.
1111
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband network LTE attach information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband network LTE attach information for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1112Shows the purpose groups GUIDs available.
Shows the purpose groups GUIDs available.
1113
Usage: %1!s!

Remarks:

Shows the purpose group GUIDs that can be used to filter profiles on the device.
There are no parameters for this command.

Examples:

%1!s!

Usage: %1!s!

Remarks:

Shows the purpose group GUIDs that can be used to filter profiles on the device.
There are no parameters for this command.

Examples:

%1!s!
1114Shows the Mobile Broadband data highest connnection category for the given interface.
Shows the Mobile Broadband data highest connnection category for the given interface.
1115
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data highest connnection category for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data highest connnection category for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1116Shows the Mobile Broadband data enterpriseAPN parameters for the given interface.
Shows the Mobile Broadband data enterpriseAPN parameters for the given interface.
1117
Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data enterpriseAPN parameters for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"

Usage: %1!s! [interface=]

Parameters:

Tag Value
*** *****
interface Interface Name.

Remarks:

Shows the Mobile Broadband data enterpriseAPN parameters for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Examples:

%1!s! interface="Mobile Broadband Connection"
1130Enable or disable tracing.
Enable or disable tracing.
1131
Usage: %1!s! [mode=]yes|no

Parameters:

Tag Value
mode - One of the following values:
yes: Enables tracing for Mobile Broadband.
no: Disables tracing for Mobile Broadband.

Remarks:

If enabled then the trace logs for Mobile Broadband will be collected
and saved to the trace files.

The parameter mode is required. If mode is set to disable, tracing will
be stopped.


Examples:

%1!s! mode=yes


Usage: %1!s! [mode=]yes|no

Parameters:

Tag Value
mode - One of the following values:
yes: Enables tracing for Mobile Broadband.
no: Disables tracing for Mobile Broadband.

Remarks:

If enabled then the trace logs for Mobile Broadband will be collected
and saved to the trace files.

The parameter mode is required. If mode is set to disable, tracing will
be stopped.


Examples:

%1!s! mode=yes

1132Set parameters in a Mobile Broadband Network Profile.
Set parameters in a Mobile Broadband Network Profile.
1133
Usage: %1!s! [name=] [[interface=]]
[[cost]=default|unrestricted|fixed|variable]

Parameters:

Tag Value
*** *****
name Name of the profile to be modified.
interface Interface name.
cost Cost associated with the profile.

Remarks:

Modifies the specified profile. If the interface is specified then
only the profile on that interface is modified.

The name parameter is required. At least one other parameter besides
profile name and interface must also be specified.

Examples:

%1!s! name="profile 1" cost=default

Usage: %1!s! [name=] [[interface=]]
[[cost]=default|unrestricted|fixed|variable]

Parameters:

Tag Value
*** *****
name Name of the profile to be modified.
interface Interface name.
cost Cost associated with the profile.

Remarks:

Modifies the specified profile. If the interface is specified then
only the profile on that interface is modified.

The name parameter is required. At least one other parameter besides
profile name and interface must also be specified.

Examples:

%1!s! name="profile 1" cost=default
1134Sets the Mobile Broadband data auto connect state for the given interface.
Sets the Mobile Broadband data auto connect state for the given interface.
1135
Usage: %1!s! [interface=] [state=]autooff|autoon|manualoff|manualon

Parameters:

Tag Value
*** *****
interface Interface Name.
state One of the following values:
autooff: Auto connect token off.
autoon: Auto connect token on.
manualoff: Manual connect token off.
manualon: Manual connect token on.

Remarks:

Sets the Mobile Broadband data auto connect state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter state is required. It is the auto connect state to be set.

Examples:

%1!s! interface="Mobile Broadband Connection" state=autoon

Usage: %1!s! [interface=] [state=]autooff|autoon|manualoff|manualon

Parameters:

Tag Value
*** *****
interface Interface Name.
state One of the following values:
autooff: Auto connect token off.
autoon: Auto connect token on.
manualoff: Manual connect token off.
manualon: Manual connect token on.

Remarks:

Sets the Mobile Broadband data auto connect state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter state is required. It is the auto connect state to be set.

Examples:

%1!s! interface="Mobile Broadband Connection" state=autoon
1136Turns the Mobile Broadband data on or off for the given profile set and interface.
Turns the Mobile Broadband data on or off for the given profile set and interface.
1137
Usage: %1!s! [interface=] [profileset=]internet|mms|all [mode=]yes|no

Parameters:

Tag Value
*** *****
interface Interface Name.
profileset Name of the profile set.
mode One of the following values:
yes: Enables the target profile set.
no: Disables the target profile set.

Remarks:

Turns the Mobile Broadband data on or off for the given profile set and
interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters profileset and mode are required. They specify the name of the
profile set to be enabled or disabled.

Examples:

%1!s! interface="Mobile Broadband Connection" profileset=mms mode=yes

Usage: %1!s! [interface=] [profileset=]internet|mms|all [mode=]yes|no

Parameters:

Tag Value
*** *****
interface Interface Name.
profileset Name of the profile set.
mode One of the following values:
yes: Enables the target profile set.
no: Disables the target profile set.

Remarks:

Turns the Mobile Broadband data on or off for the given profile set and
interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters profileset and mode are required. They specify the name of the
profile set to be enabled or disabled.

Examples:

%1!s! interface="Mobile Broadband Connection" profileset=mms mode=yes
1138Sets the Mobile Broadband data roam control state for the given profile set and interface.
Sets the Mobile Broadband data roam control state for the given profile set and interface.
1139
Usage: %1!s! [interface=] [profileset=]internet|mms|all [state=]none|partner|all

Parameters:

Tag Value
*** *****
interface Interface Name.
profileset Name of the profile set.
state One of the following values:
none: Home carrier only.
partner: Home and partner carriers only.
all: Home, partner and roaming carriers.

Remarks:

Sets the Mobile Broadband data roam control state for the given profile set
and interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters profileset and state are required. They specify the name of the
profile set and the roam control state to be set.

Examples:

%1!s! interface="Mobile Broadband Connection" profileset=mms mode=partner

Usage: %1!s! [interface=] [profileset=]internet|mms|all [state=]none|partner|all

Parameters:

Tag Value
*** *****
interface Interface Name.
profileset Name of the profile set.
state One of the following values:
none: Home carrier only.
partner: Home and partner carriers only.
all: Home, partner and roaming carriers.

Remarks:

Sets the Mobile Broadband data roam control state for the given profile set
and interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters profileset and state are required. They specify the name of the
profile set and the roam control state to be set.

Examples:

%1!s! interface="Mobile Broadband Connection" profileset=mms mode=partner
1140Turns the Mobile Broadband radio on or off for the given interface.
Turns the Mobile Broadband radio on or off for the given interface.
1141
Usage: %1!s! [interface=] [state=]on|off

Parameters:

Tag Value
*** *****
interface Interface Name.
state One of the following values:
on: power on radio transceiver.
off: power off the radio transceiver.

Remarks:

Sets the Mobile Broadband radio power state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter state is required. It specifies if radio is to be turned on or off.

Examples:

%1!s! interface="Mobile Broadband Connection" state=on

Usage: %1!s! [interface=] [state=]on|off

Parameters:

Tag Value
*** *****
interface Interface Name.
state One of the following values:
on: power on radio transceiver.
off: power off the radio transceiver.

Remarks:

Sets the Mobile Broadband radio power state for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameter state is required. It specifies if radio is to be turned on or off.

Examples:

%1!s! interface="Mobile Broadband Connection" state=on
1142Sets the Mobile Broadband data highest connnection category for the given interface.
Sets the Mobile Broadband data highest connnection category for the given interface.
1143
Usage: %1!s! [interface=] [highestcc=]admim|user|operator|device

Parameters:

Tag Value
*** *****
interface Interface Name.
highestcc One of the following values:
admin: admin provisioned profiles.
user: user proviioned profiles.
operator: operator proviioned profiles.
device: device proviioned profiles.

Remarks:

Sets the Mobile Broadband data highest connnection category for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters highestcc is required. They specify the highest connection category.

Examples:

%1!s! interface="Mobile Broadband Connection" highestcc=operator

Usage: %1!s! [interface=] [highestcc=]admim|user|operator|device

Parameters:

Tag Value
*** *****
interface Interface Name.
highestcc One of the following values:
admin: admin provisioned profiles.
user: user proviioned profiles.
operator: operator proviioned profiles.
device: device proviioned profiles.

Remarks:

Sets the Mobile Broadband data highest connnection category for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters highestcc is required. They specify the highest connection category.

Examples:

%1!s! interface="Mobile Broadband Connection" highestcc=operator
1144Sets the Mobile Broadband data enterpriseAPN parameters for the given interface.
Sets the Mobile Broadband data enterpriseAPN parameters for the given interface.
1145
Usage: %1!s! [interface=] [allowusercontrol=]yes|no|nc [allowuserview=]yes|no|nc [profileaction=]add|delete|modify|nc

Parameters:

Tag Value
*** *****
interface Interface Name.
allowusercontrol One of the following values:
yes: allow end user control enterpriseAPN.
no: allow end user control enterpriseAPN.
nc: no change.
allowuserview One of the following values:
yes: allow end user view enterpriseAPN.
no: allow end user view enterpriseAPN.
nc: no change.
profileaction One of the following values:
add: an enterpriseAPN profile is just added.
delete: an enterpriseAPN profile is just deleted.
modify: an enterpriseAPN profile is just modified.
nc: no change.

Remarks:

Sets the Mobile Broadband data enterpriseAPN parameters for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters allowusercontrol, allowuserview and profileaction are required.

Examples:

%1!s! interface="Mobile Broadband Connection" profileset=mms mode=yes

Usage: %1!s! [interface=] [allowusercontrol=]yes|no|nc [allowuserview=]yes|no|nc [profileaction=]add|delete|modify|nc

Parameters:

Tag Value
*** *****
interface Interface Name.
allowusercontrol One of the following values:
yes: allow end user control enterpriseAPN.
no: allow end user control enterpriseAPN.
nc: no change.
allowuserview One of the following values:
yes: allow end user view enterpriseAPN.
no: allow end user view enterpriseAPN.
nc: no change.
profileaction One of the following values:
add: an enterpriseAPN profile is just added.
delete: an enterpriseAPN profile is just deleted.
modify: an enterpriseAPN profile is just modified.
nc: no change.

Remarks:

Sets the Mobile Broadband data enterpriseAPN parameters for the given interface.

Parameter interface is required. It is one of the interface name shown
by "netsh mbn show interfaces" command.

Parameters allowusercontrol, allowuserview and profileaction are required.

Examples:

%1!s! interface="Mobile Broadband Connection" profileset=mms mode=yes
1500Mobile Broadband Service (wwansvc) is not running.
Mobile Broadband Service (wwansvc) is not running.
1501Error connecting to Mobile Broadband Service: error 0x%1!x!.
Error connecting to Mobile Broadband Service: error 0x%1!x!.
1502, %1!s! , %1!s!
1503

1600One or more parameters for the command are not correct or are missing.
One or more parameters for the command are not correct or are missing.
1601The Profile cannot be loaded.
The Profile cannot be loaded.
1602The Profile data is not valid.
The Profile data is not valid.
1603The given profile is not found.
The given profile is not found.
1604The given interface is not present or not a Mobile Broadband interface.
The given interface is not present or not a Mobile Broadband interface.
1605The given interface is not ready.
The given interface is not ready.
1606The Mobile Broadband interfaces cannot be enumerated from the service.
The Mobile Broadband interfaces cannot be enumerated from the service.
1607There is no Mobile Broadband interface There is no Mobile Broadband interface
1608The adapters cannot be enumerated.
The adapters cannot be enumerated.
1609Unable to create COM Instance.
Unable to create COM Instance.
1610WaitForMultipleObjectsEx Failure: error 0x%1!x!.
WaitForMultipleObjectsEx Failure: error 0x%1!x!.
1611The requested information is not available. The caller has to retry later.
The requested information is not available. The caller has to retry later.
1612Failed to allocate memory for the results.
Failed to allocate memory for the results.
1613Failed to access the interface: error 0x%1!x!.
Failed to access the interface: error 0x%1!x!.
1614Failed to get pin information: error 0x%1!x!.
Failed to get pin information: error 0x%1!x!.
1615Failed to scan on the given interface to get available networks : error 0x%1!x!.
Failed to scan on the given interface to get available networks : error 0x%1!x!.
1616Failed to register for notifications: error 0x%1!x!.
Failed to register for notifications: error 0x%1!x!.
1617Failed to get the profile list: error 0x%1!x!.
Failed to get the profile list: error 0x%1!x!.
1618Failed with error 0x%1!x!.
Failed with error 0x%1!x!.
1619The device is not responding.
The device is not responding.
1620
Failed to set cost for profile "%1!s!".

Failed to set cost for profile "%1!s!".
1700Add Profile Failure: Invalid Profile XML.
Add Profile Failure: Invalid Profile XML.
1701Add Profile Failure: error 0x%1!x!.
Add Profile Failure: error 0x%1!x!.
1710Delete Profile Failure:
The given interface is not present or not a Mobile Broadband interface,
or, the given profile name not found,
or, the given profile name does not match.
Delete Profile Failure:
The given interface is not present or not a Mobile Broadband interface,
or, the given profile name not found,
or, the given profile name does not match.
1711Delete Profile Failure: error 0x%1!x!.
Delete Profile Failure: error 0x%1!x!.
1721Connect Failure:
The given interface is not present or not a Mobile Broadband interface,
or, the given profile name not found,
or, the given profile name does not match.
Connect Failure:
The given interface is not present or not a Mobile Broadband interface,
or, the given profile name not found,
or, the given profile name does not match.
1722Connect Failure: Invalid Profile XML.
Connect Failure: Invalid Profile XML.
1723Connect Failure: Service Not Activated.
Connect Failure: Service Not Activated.
1724Connect Failure: PIN Required.
Connect Failure: PIN Required.
1725Connect Failure: Maximum PDP Context activation limit reached.
Connect Failure: Maximum PDP Context activation limit reached.
1726Connect Failure: Invalid Access String.
Connect Failure: Invalid Access String.
1727Connect Failure: Invalid Username or password.
Connect Failure: Invalid Username or password.
1728Connect Failure: Device is not initialized.
Connect Failure: Device is not initialized.
1729Connect Failure: error 0x%1!x!.
Connect Failure: error 0x%1!x!.
1740Disconnect Failure: PIN Required.
Disconnect Failure: PIN Required.
1741Disconnect Failure: Context Not Activated.
Disconnect Failure: Context Not Activated.
1742Disconnect Failure: error 0x%1!x!.
Disconnect Failure: error 0x%1!x!.
1750Failed to start tracing.
Failed to start tracing.
1751The requested operation requires elevation (Run as administrator).
The requested operation requires elevation (Run as administrator).
1801Profile "%1!s!" does not exist on interface "%2!s!".
Profile "%1!s!" does not exist on interface "%2!s!".
1802
Profile %2!s! on interface %1!s!:
=======================================================================

Profile %2!s! on interface %1!s!:
=======================================================================
1803
Profiles on interface %1!s!:
-------------------------------------

Profiles on interface %1!s!:
-------------------------------------
1804%1!s!
%1!s!
1806
Profiles for purpose %1!s! on interface %2!s!:
-------------------------------------

Profiles for purpose %1!s! on interface %2!s!:
-------------------------------------
1810Mobile Broadband tracing is not enabled on the system.
Mobile Broadband tracing is not enabled on the system.
1811Mobile Broadband tracing is currently running.
Mobile Broadband tracing is currently running.
1812Mobile Broadband tracing is currently stopped.
Mobile Broadband tracing is currently stopped.
1901
Profile Information
-------------------

Profile Information
-------------------
1902Version : 1
Version : 1
1903Type : Mobile Broadband
Type : Mobile Broadband
1904Name : %1!s!
Name : %1!s!
1905Control options :
Control options :
1906Connection mode : %1!s!
Connection mode : %1!s!
1907Manual Manual
1908Auto connect always Auto connect always
1909Auto connect except when roaming Auto connect except when roaming
1910Unknown Unknown
1911
Connectivity settings
---------------------

Connectivity settings
---------------------
1912Service Provider Name :
Service Provider Name :
1918Default : Yes
Default : Yes
1919Default : No
Default : No
1920Access Point Name : %1!s!
Access Point Name : %1!s!
1921Username : %1!s!
Username : %1!s!
1922Preferred Roaming Providers : %1!s!
Preferred Roaming Providers : %1!s!
1923: %1!s!
: %1!s!
1924Subscriber Id : %1!s!
Subscriber Id : %1!s!
1925Additional PDP Context : Yes
Additional PDP Context : Yes
1926Additional PDP Context : No
Additional PDP Context : No
1927Tethering : Yes
Tethering : Yes
1928Tethering : No
Tethering : No
2000Bad Profile Reason: UNKNOWN.
Bad Profile Reason: UNKNOWN.
2001Bad Profile Reason: Duplicate Name.
Bad Profile Reason: Duplicate Name.
2002Bad Profile Reason: Already Exists.
Bad Profile Reason: Already Exists.
2003Bad Profile Reason: Invalid network selection mode.
Bad Profile Reason: Invalid network selection mode.
2004Bad Profile Reason: Invalid network type
Bad Profile Reason: Invalid network type
2005Bad Profile Reason: Invalid key.
Bad Profile Reason: Invalid key.
2006Bad Profile Reason: Invalid XML.
Bad Profile Reason: Invalid XML.
2101
Pin information for interface %1!s!:
-------------------------------------

Pin information for interface %1!s!:
-------------------------------------
2102Pin Type : %1!s!
Pin Type : %1!s!
2103Pin State : %1!s!
Pin State : %1!s!
2104Attempts Remaining : %1!d!
Attempts Remaining : %1!d!
2105Attempts Remaining : Unknown
Attempts Remaining : Unknown
2151None None
2152Custom Custom
2153Pin1 Pin1
2154Pin2 Pin2
2155Device Sim Pin Device Sim Pin
2156Device First Sim Pin Device First Sim Pin
2157Network Pin Network Pin
2158Network Subset Pin Network Subset Pin
2159Service Provider Pin Service Provider Pin
2160Corporate Pin Corporate Pin
2161Subsidy Lock Subsidy Lock
2162Puk1 Puk1
2163Puk2 Puk2
2164Device First Sim Puk Device First Sim Puk
2165Network Puk Network Puk
2166Network Subset Puk Network Subset Puk
2167Service ProviderPuk Service ProviderPuk
2168Corporate Puk Corporate Puk
2202Enter Enter
2203Max Max
2251
Pin Type : Pin1

Pin Type : Pin1
2252
Pin Type : Pin2

Pin Type : Pin2
2253
Pin Type : Device sim pin

Pin Type : Device sim pin
2254
Pin Type : Device first sim pin

Pin Type : Device first sim pin
2255
Pin Type : Network pin

Pin Type : Network pin
2256
Pin Type : Network subset pin

Pin Type : Network subset pin
2257
Pin Type : SVC provider pin

Pin Type : SVC provider pin
2258
Pin Type : Corporate pin

Pin Type : Corporate pin
2259
Pin Type : Subsidy lock

Pin Type : Subsidy lock
2260
Pin list information for interface %1!s!:
-------------------------------------

Pin list information for interface %1!s!:
-------------------------------------
2261Pin Mode : %1!s!
Pin Mode : %1!s!
2262Pin Format : %1!s!
Pin Format : %1!s!
2263Pin Minimum Length : %1!d!
Pin Minimum Length : %1!d!
2264Pin Maximum Length : %1!d!
Pin Maximum Length : %1!d!
2265Not supported Not supported
2266Enabled Enabled
2267Disabled Disabled
2269Numeric Numeric
2270Alphanumeric Alphanumeric
2401
Radio state information for interface %1!s!:
-------------------------------------

Radio state information for interface %1!s!:
-------------------------------------
2402Hardware radio state : On
Hardware radio state : On
2403Hardware radio state : Off
Hardware radio state : Off
2404Software radio state : On
Software radio state : On
2405Software radio state : Off
Software radio state : Off
2451
Home provider information for interface %1!s!:
-------------------------------------

Home provider information for interface %1!s!:
-------------------------------------
2452Home provider name : %1!s!
Home provider name : %1!s!
2453Home provider Id : %1!s!
Home provider Id : %1!s!
2501
Connection information for interface %1!s!:
-------------------------------------

Connection information for interface %1!s!:
-------------------------------------
2502Device is not ready. The caller has to retry later.
Device is not ready. The caller has to retry later.
2503Interface State : Connected
Interface State : Connected
2504Interface State : Not connected
Interface State : Not connected
2505Provider Id : %1!s!
Provider Id : %1!s!
2506Provider Name : %1!s!
Provider Name : %1!s!
2507Register Mode : %1!s!
Register Mode : %1!s!
2509Automatic Automatic
2511Roaming text : %1!s!
Roaming text : %1!s!
2512Provider Data Class : %1!s! Provider Data Class : %1!s!
2513Number of connections : %1!d!
Number of connections : %1!d!
2514
Serial number #%1!d!

Serial number #%1!d!
2515Connection Id : %1!d!
Connection Id : %1!d!
2516Access Point Name : %1!s!
Access Point Name : %1!s!
2517Register State : %1!s!
Register State : %1!s!
2518Home Home
2519Roaming Roaming
2520Roaming on preferred partner Roaming on preferred partner
2522Voice call state : %1!s!
Voice call state : %1!s!
2523No voice call support / No voice call in progress No voice call support / No voice call in progress
2524In progress In progress
2525Hangup Hangup
2527Deregistered Deregistered
2528Searching Searching
2529Denied Denied
2551
Ready information for interface %1!s!:
-------------------------------------

Ready information for interface %1!s!:
-------------------------------------
2552State : %1!s!
State : %1!s!
2553Stack is off Stack is off
2554Ready to power up and register Ready to power up and register
2555SIM not inserted SIM not inserted
2556SIM is invalid SIM is invalid
2557Device failure Device failure
2558Device not activated Device not activated
2559Device is locked Device is locked
2561Subscriber Id : %1!s!
Subscriber Id : %1!s!
2562SIM ICC Id : %1!s!
SIM ICC Id : %1!s!
2563Number of telephone numbers : %1!d!
Number of telephone numbers : %1!d!
2564Telephone #%1!d! : %2!s!
Telephone #%1!d! : %2!s!
2565Emergency mode : %1!s!
Emergency mode : %1!s!
2566On On
2567Off Off
2569No active SIM profile No active SIM profile
2601
Device capability information for interface %1!s!:
-------------------------------------------------------

Device capability information for interface %1!s!:
-------------------------------------------------------
2602Device type : %1!s!
Device type : %1!s!
2604Mobile Broadband device is embedded in the system Mobile Broadband device is embedded in the system
2605Mobile Broadband device is removable Mobile Broadband device is removable
2606This is a remote device This is a remote device
2607Cellular class : %1!s!
Cellular class : %1!s!
2609GSM GSM
2610CDMA CDMA
2611Voice class : %1!s!
Voice class : %1!s!
2613No voice No voice
2614Separate voice and data Separate voice and data
2615Simultaneous voice and data Simultaneous voice and data
2616Sim class : %1!s!
Sim class : %1!s!
2618SIM is logical or embedded in the device SIM is logical or embedded in the device
2619SIM is removable SIM is removable
2620SIM is remote and is not physically attached to Mobile Broadband Device SIM is remote and is not physically attached to Mobile Broadband Device
2621Data class : %1!s! Data class : %1!s!
2622GSM band class : %1!s! GSM band class : %1!s!
2623CDMA band class : %1!s! CDMA band class : %1!s!
2624SMS capability : %1!s! SMS capability : %1!s!
2625Control capability : %1!s! Control capability : %1!s!
2626Device Id : %1!s!
Device Id : %1!s!
2627Manufacturer : %1!s!
Manufacturer : %1!s!
2628Model : %1!s!
Model : %1!s!
2629Firmware Information : %1!s!
Firmware Information : %1!s!
2630Maximum activation contexts : %1!u!
Maximum activation contexts : %1!u!
2632GPRS GPRS
2633EDGE EDGE
2634UMTS UMTS
2635HSDPA HSDPA
2636HSUPA HSUPA
26371xRTT 1xRTT
26381xEVDO 1xEVDO
26391xEVDO REVA 1xEVDO REVA
26401xEVDV 1xEVDV
26413xRTT 3xRTT
26421xEVDO REVB 1xEVDO REVB
2643LTE LTE
2645800 MHz 800 MHz
26461900 MHz 1900 MHz
2647TACS TACS
2648JTACS JTACS
2649Korean PCS Korean PCS
2650450 MHz 450 MHz
26512 GHz 2 GHz
2652700 MHz 700 MHz
26531800 MHz 1800 MHz
2654900 MHz 900 MHz
2655Secondary 800 MHz Secondary 800 MHz
2656400 MHz European PAMR 400 MHz European PAMR
2657800 MHz PAMR 800 MHz PAMR
26582.5GHz IMT2000 Extension 2.5GHz IMT2000 Extension
2659US PCS 1.9 GHz US PCS 1.9 GHz
2660AWS AWS
2661US 2.5GHz US 2.5GHz
2662US 2.5 GHz Forward Link Only US 2.5 GHz Forward Link Only
2664IMT IMT
2665PCS1900 PCS1900
2666DCS1800 DCS1800
2667AWS 1.7/2.1 AWS 1.7/2.1
2668GSM850 GSM850
2669UMTS800 UMTS800
2670UMTS2600 UMTS2600
2671EGSM900 EGSM900
2672UMTS1700 UMTS1700
2675PDU receive PDU receive
2676PDU send PDU send
2677Text receive Text receive
2678Text send Text send
2680Manual network selection is allowed Manual network selection is allowed
2681Hardware radio switch functionality available Hardware radio switch functionality available
2682Configured for mobile IP support Configured for mobile IP support
2683Configured for simple IP support Configured for simple IP support
2684Configured for mobile IP with simple IP as fallback Configured for mobile IP with simple IP as fallback
2685
%1!s!

%1!s!
2686USSD support available USSD support available
2687MultiCarrier functionality available MultiCarrier functionality available
2688Multi mode support available Multi mode support available
2701
Visible providers list for interface %1!s!:
-----------------------------------------------

Visible providers list for interface %1!s!:
-----------------------------------------------
2702
Provider # %1!d!

Provider # %1!d!
2703Name : %1!s!
Name : %1!s!
2704Id : %1!s!
Id : %1!s!
2705state : %1!s! state : %1!s!
2706data class : %1!s! data class : %1!s!
2707There are no visible providers There are no visible providers
2710Forbidden Forbidden
2711Preferred Preferred
2712Visible Visible
2713Registered Registered
2714Scanning for available networks. Device can take few minutes to complete this operation
Scanning for available networks. Device can take few minutes to complete this operation
2715Preferred Multicarrier Preferred Multicarrier
2716cellular class : %1!s!
cellular class : %1!s!
2717rssi : %1!d!
rssi : %1!d!
2718error rate : %1!lu!
error rate : %1!lu!
2726
Preferred providers list for interface %1!s!:
-----------------------------------------------

Preferred providers list for interface %1!s!:
-----------------------------------------------
2732There are no preferred providers There are no preferred providers
2751
Signal information for interface %1!s!:
-----------------------------------------------

Signal information for interface %1!s!:
-----------------------------------------------
2752Signal : %1!d!%%
Signal : %1!d!%%
2753RSSI / RSCP : %1!d! (%2!d! dBm)
RSSI / RSCP : %1!d! (%2!d! dBm)
2754Error Rate : %1!lu!
Error Rate : %1!lu!
2755Rssi interval : %1!lu!
Rssi interval : %1!lu!
2756Rssi threshold : %1!lu!
Rssi threshold : %1!lu!
2776
Provisioned contexts list for interface %1!s!:
-----------------------------------------------

Provisioned contexts list for interface %1!s!:
-----------------------------------------------
2777
Serial number # %1!d!

Serial number # %1!d!
2778Context Id : %1!lu!
Context Id : %1!lu!
2779Context type : %1!s!
Context type : %1!s!
2780Access Point Name : %1!s!
Access Point Name : %1!s!
2781User name : %1!s!
User name : %1!s!
2782Compression type : %1!s!
Compression type : %1!s!
2783Authentication protocol type : %1!s!
Authentication protocol type : %1!s!
2784There are no provisioned contexts There are no provisioned contexts
2786Internet Internet
2787VPN VPN
2788Voice Voice
2789Video share Video share
2792PAP PAP
2793CHAP CHAP
2794MS CHAPv2 MS CHAPv2
2800
There are %1!d! interfaces on the system:

There are %1!d! interfaces on the system:
2801
There is 1 interface on the system:

There is 1 interface on the system:
2802
Name : %1!s!
Description : %2!s!
GUID : %3!s!
Physical Address : %4!02x!:%5!02x!:%6!02x!:%7!02x!:%8!02x!:%9!02x!

Name : %1!s!
Description : %2!s!
GUID : %3!s!
Physical Address : %4!02x!:%5!02x!:%6!02x!:%7!02x!:%8!02x!:%9!02x!
2803
Device type : %1!s!

Device type : %1!s!
2804
Cellular class : %1!s!

Cellular class : %1!s!
2805
State : Connected

State : Connected
2806
State : Locked

State : Locked
2807
State : Not connected

State : Not connected
2808
Device Id : %1!s!
Manufacturer : %2!s!
Model : %3!s!
Firmware Version : %4!s!

Device Id : %1!s!
Manufacturer : %2!s!
Model : %3!s!
Firmware Version : %4!s!
2809
Provider Name : %1!s!

Provider Name : %1!s!
2810
Roaming : Yes

Roaming : Yes
2811
Roaming : Not roaming

Roaming : Not roaming
2812
Signal : %1!d!%%

Signal : %1!d!%%
2813
Name : Unknown
Description : %1!s!
GUID : Unknown
Physical Address : Unknown

Name : Unknown
Description : %1!s!
GUID : Unknown
Physical Address : Unknown
2814
RSSI / RSCP : %1!d! (%2!d! dBm)

RSSI / RSCP : %1!d! (%2!d! dBm)
2824
Mobile Broadband configuration dump is not supported

Mobile Broadband configuration dump is not supported
2825
SMS configuration information for interface %1!s!:
-------------------------------------

SMS configuration information for interface %1!s!:
-------------------------------------
2826Ready to send SMS : Yes
Ready to send SMS : Yes
2827Ready to send SMS : No
Ready to send SMS : No
2828Service center address : %1!s!
Service center address : %1!s!
2829Available messages count: %1!d!
Available messages count: %1!d!
2830Message store full : Yes
Message store full : Yes
2831Message store full : No
Message store full : No
2832Message store full : Unknown
Message store full : Unknown
2833SMS format : %1!s!
SMS format : %1!s!
2834PDU PDU
2837Does not support SMS
Does not support SMS
2850
Device is locked, some of the information cannot be retrieved

Device is locked, some of the information cannot be retrieved
2851
Radio is off, some of the information cannot be retrieved

Radio is off, some of the information cannot be retrieved
2852
Bad sim inserted, some of the information cannot be retrieved

Bad sim inserted, some of the information cannot be retrieved
2853
Sim is not inserted, some of the information cannot be retrieved

Sim is not inserted, some of the information cannot be retrieved
2854
Failed to retrieve some of the information: error 0x%1!x!

Failed to retrieve some of the information: error 0x%1!x!
2855
The device is currently busy. Try this command again later

The device is currently busy. Try this command again later
2856
The device does not support retrieval of this information

The device does not support retrieval of this information
2876
Cost settings
-------------

Cost settings
-------------
2878Cost : Unrestricted
Cost : Unrestricted
2879Cost : Fixed
Cost : Fixed
2880Cost : Variable
Cost : Variable
2881Cost : Unknown
Cost : Unknown
2882Cost : Not available
Cost : Not available
2883Approaching Data Limit : Yes
Approaching Data Limit : Yes
2884Approaching Data Limit : No
Approaching Data Limit : No
2885Over Data Limit : Yes
Over Data Limit : Yes
2886Over Data Limit : No
Over Data Limit : No
2887Congested : Yes
Congested : Yes
2888Congested : No
Congested : No
2889Roaming : Yes
Roaming : Yes
2890Roaming : No
Roaming : No
2891Cost Source : Default
Cost Source : Default
2892Cost Source : Group Policy
Cost Source : Group Policy
2893Cost Source : User
Cost Source : User
2894Cost Source : Operator
Cost Source : Operator
2901
Plan settings
-------------

Plan settings
-------------
2902Usage in Megabytes : %1!d!
Usage in Megabytes : %1!d!
2903Usage Sync Time : %1!s! %2!s!
Usage Sync Time : %1!s! %2!s!
2904Data Limit in Megabytes : %1!d!
Data Limit in Megabytes : %1!d!
2905Inbound Bandwidth in Kbps : %1!d!
Inbound Bandwidth in Kbps : %1!d!
2906Billing Cycle StartDate : %1!s! %2!s!
Billing Cycle StartDate : %1!s! %2!s!
2907Billing Cycle Duration :
Billing Cycle Duration :
2908Number of years : %1!d!
Number of years : %1!d!
2909Number of months : %1!d!
Number of months : %1!d!
2910Number of days : %1!d!
Number of days : %1!d!
2911Number of hours : %1!d!
Number of hours : %1!d!
2912Number of minutes : %1!d!
Number of minutes : %1!d!
2913Number of seconds : %1!d!
Number of seconds : %1!d!
2914Number of milliseconds : %1!d!
Number of milliseconds : %1!d!
2915Billing Cycle Reset : Yes
Billing Cycle Reset : Yes
2916Billing Cycle Reset : No
Billing Cycle Reset : No
2917Maximum Transfer Size in Megabytes : %1!d!
Maximum Transfer Size in Megabytes : %1!d!
2918Outbound Bandwidth in Kbps : %1!d!
Outbound Bandwidth in Kbps : %1!d!
2926
Data enablement state information on interface %1!s!:
-------------------------------------

Data enablement state information on interface %1!s!:
-------------------------------------
2929
Data roam control state information on interface %1!s!:
-------------------------------------

Data roam control state information on interface %1!s!:
-------------------------------------
2930Home carrier only Home carrier only
2931Home and partner carriers only Home and partner carriers only
2932Home, partner and roaming carriers Home, partner and roaming carriers
2934Internet Always On : %1!s!
Internet Always On : %1!s!
2935MMS On Demand : %1!s!
MMS On Demand : %1!s!
2936All Host Profiles : %1!s!
All Host Profiles : %1!s!
2937Unknown Profile : %1!s!
Unknown Profile : %1!s!
2951
Auto connect state information on interface %1!s!:
-------------------------------------

Auto connect state information on interface %1!s!:
-------------------------------------
2952Auto connect token off Auto connect token off
2953Auto connect token on Auto connect token on
2954Manual connect token off Manual connect token off
2955Manual connect token on Manual connect token on
2976
Profile state information on interface %1!s!:
-------------------------------------

Profile state information on interface %1!s!:
-------------------------------------
2977Unavailable Unavailable
2978Disconnected available Disconnected available
2979Connected Connected
2991
Network LTE attach information on interface %1!s!:
-------------------------------------

Network LTE attach information on interface %1!s!:
-------------------------------------
2992Version: %1!d!
Version: %1!d!
2993Is LTE attached: %1!d!
Is LTE attached: %1!d!
2994Is Network LTE attach information available: %1!d!
Is Network LTE attach information available: %1!d!
2995Network LTE attach APN: %1!s!
Network LTE attach APN: %1!s!
2996Network LTE attach IP type: %1!d!
Network LTE attach IP type: %1!d!
3001
Purpose Group GUIDS:
-------------------------------------

Purpose Group GUIDS:
-------------------------------------
3011
Highest Connection Category information on interface %1!s!:
-------------------------------------

Highest Connection Category information on interface %1!s!:
-------------------------------------
3012Admin-Provisioned Profiles Admin-Provisioned Profiles
3013User-Provisioned Profiles User-Provisioned Profiles
3014Operator-Provisioned Profiles Operator-Provisioned Profiles
3015Device-Provisioned Profiles Device-Provisioned Profiles
3021
EnterpriseAPN Parameters information on interface %1!s!:
-------------------------------------

EnterpriseAPN Parameters information on interface %1!s!:
-------------------------------------
3022AllowEndUserControl: %1!d! AllowEndUserControl: %1!d!
3023AllowEndUserView: %1!d! AllowEndUserView: %1!d!
3024CurrentEnterpriseAPNProfileAction: %1!d! CurrentEnterpriseAPNProfileAction: %1!d!

EXIF

File Name:wwancfg.dll.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-w..sh-helper.resources_31bf3856ad364e35_10.0.15063.0_en-us_0e13583cf069d8c0\
File Size:81 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:82432
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Dynamic link library
File Subtype:0
Language Code:English (U.S.)
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:MBN Netsh Helper DLL
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:wwancfg.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:wwancfg.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0

What is wwancfg.dll.mui?

wwancfg.dll.mui is Multilingual User Interface resource file that contain English (U.S.) language for file wwancfg.dll (MBN Netsh Helper DLL).

File version info

File Description:MBN Netsh Helper DLL
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:wwancfg.dll
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:wwancfg.dll.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x409, 1200