| 1 | 网络组的名称。 |
Name of the Netgroup. |
| 2 | 网络组的成员。 |
Members of the Netgroup. |
| 3 | 此类表示用于配置网络文件系统(NFS)共享访问的网络组。 |
This class represents Netgroups used to configure access to Network File System (NFS) shares. |
| 4 | 客户端主机名或组名。 |
Client host or Group Name. |
| 5 | 使用网络文件系统(NFS)协议共享的文件夹的路径。 |
Path to the folder shared using the Network File System (NFS) protocol. |
| 6 | 客户端类型，有效值为 host 和 netgroup。 |
Type of client, the valid values are host, netgroup. |
| 7 | 网络文件系统(NFS)共享的名称。 |
Name of the Network File System (NFS) share. |
| 8 | 客户端的访问权限。值可以是 no-access、readonly 或 readwrite |
Access permision for the client. The values can be no-access, readonly, readwrite |
| 9 | 指定是否允许 Unix“超级”用户访问网络文件系统(NFS)共享。 |
Specifies whether the unix 'root' user is allowed to access the Network File System (NFS) share. |
| 10 | 语言编码选项为 euc-jp、euc-tw、euc-kr、shift-jis、big5、ksc5601、gb2312-80 和 ansi |
Language Encoding options are euc-jp, euc-tw, euc-kr, shift-jis, big5, ksc5601, gb2312-80, ansi |
| 11 | 此类表示授予访问网络文件系统(NFS)共享的权限。 |
This class represents permissions granted to access a Network File System (NFS) share. |
| 12 | 指定是否将网络文件系统(NFS)共享配置为高度可用。 |
Specifies whether the Network File System (NFS) share is configured to be highly available. |
| 13 | 指定网络文件系统(NFS)共享的当前状态。 |
Specifies the current state of the Network File System (NFS) share. |
| 14 | 用于访问网络文件系统(NFS)共享的故障转移群集网络名称。 |
The failover cluster network name used to access the Network File System (NFS) share. |
| 15 | 网络文件系统(NFS)共享支持的 RPC 身份验证方法。 |
Supported RPC authentication methods for the Network File System (NFS) share. |
| 16 | 指定是否为网络文件系统(NFS)共享启用未映射的用户访问。 |
Specifies whether Unmapped User Access is enabled for the Network File System (NFS) share. |
| 17 | 指定是否为网络文件系统(NFS)共享启用匿名访问。 |
Specifies whether Anonymous Access is enabled for the Network File System (NFS) share. |
| 18 | 匿名用户在访问网络文件系统(NFS)共享时使用的 UID。 |
The UID used by anonymous users when accessing the Network File System (NFS) share. |
| 19 | 匿名用户在访问网络文件系统(NFS)共享时使用的 GID。 |
The GID used by anonymous users when accessing the Network File System (NFS) share. |
| 20 | NFS 共享 |
Nfs Share |
| 21 | 此类表示 Windows Server 为网络文件系统(NFS)导出的共享。 |
This class represents a share exported by the Windows Server for Network File System (NFS). |
| 22 | 用户 |
User |
| 23 | 组 |
Group |
| 24 | Windows 帐户类型: 用户或组。 |
Windows account type, user or group. |
| 25 | 用户或组的 Windows 帐户名。 |
Windows account name for user or group. |
| 26 | 映射到 Windows 帐户的 Unix 标识符。 |
Unix identifier mapped to windows account. |
| 27 | 此类表示映射到 Windows 用户或组的 Unix 用户或组。 |
This class represents unix user or group mapping to windows user or group. |
| 28 | 使用网络文件系统(NFS)协议共享文件夹。 |
Share a folder using the Network File System (NFS) protocol. |
| 29 | 修改网络文件系统(NFS)共享的配置设置。 |
Modify configuration settings for a Network File System (NFS) share. |
| 30 | 检查提供的配置是否可以用于创建网络文件系统(NFS)共享。 |
Check if the provided configuration can be used to create a Network File System (NFS) share. |
| 31 | 授予访问网络文件系统(NFS)共享的权限。 |
Grant permission to access a Network File System (NFS) share. |
| 32 | 撤消访问网络文件系统(NFS)共享的权限。 |
Revoke permission to access a Network File System (NFS) share. |
| 33 | 检索网络文件系统(NFS)共享的现有访问权限。 |
Retrieve existing access permissions for a Network File System (NFS) share. |
| 34 | 撤消客户端计算机对属于网络文件系统(NFS)共享的文件持有的锁定。 |
Revoke a lock held by a client computer on a file belonging to a Network File System (NFS) share. |
| 35 | 创建新网络组。 |
Create a new Netgroup. |
| 36 | 删除现有网络组。 |
Delete an existing Netgroup. |
| 37 | 从 Active Directory 或 Active Directory 轻型目录服务(AD LDS)枚举网络组。 |
Enumerate Netgroups from Active Directory or Active Directory Lightweight Directory Services (AD LDS). |
| 38 | 从 Active Directory、Active Directory 轻型目录服务(AD LDS)或 NIS 服务器枚举网络组。 |
Enumerate Netgroups from Active Directory, Active Directory Lightweight Directory Services (AD LDS) or an NIS server. |
| 39 | 从 NIS 服务器枚举网络组。 |
Enumerate Netgroups from an NIS server. |
| 40 | 向网络组添加新成员。从网络组中删除现有成员 |
Add a new member to a Netgroup. Remove an existing member from a Netgroup |
| 41 | 检查网络文件系统服务器上的网络组名称是否有效。 |
Check if the netgroup name is valid on Network File System server. |
| 42 | 启动网络文件系统(NFS)客户端。 |
Start Client for Network File System (NFS). |
| 43 | 停止网络文件系统(NFS)客户端。 |
Stop Client for Network File System (NFS). |
| 44 | 启动网络文件系统(NFS)服务器。 |
Start Server for Network File System (NFS). |
| 45 | 停止网络文件系统(NFS)服务器。 |
Stop Server for Network File System (NFS). |
| 46 | 创建新客户端组。 |
Create a new Clientgroup. |
| 47 | 向客户端组添加新成员。从客户端组中删除现有成员 |
Add a new member to a Clientgroup. Remove an existing member from a Clientgroup |
| 48 | 更改组名 |
Change a name for the group |
| 49 | 将帐户名解析为标识符 |
Resolve account name to identifier |
| 50 | 将帐户标识符解析为帐户名 |
Resolve account identifier to account name |
| 51 | 以 Xml 字符串格式为 Windows 网络文件系统(NFS)服务器导出的共享设置访问权限。 |
Set access permissions in xml string format for shares exported by the Windows Network File System (NFS) server. |
| 52 | 验证 Windows NFS 服务器使用的身份映射存储的配置设置。 |
Validates the configuration settings for the identity mapping store used by the Windows NFS server. |
| 53 | 用于管理网络文件系统(NFS)服务器的 WMI 类 |
WMI class to administer the Server for Network File System (NFS) |
| 54 | 网络文件系统(NFS)服务器维护的调用统计信息的协议。 |
Protocol of the call statistic maintained by the Server for Network File System (NFS). |
| 55 | 网络文件系统(NFS)服务器维护的调用统计信息的协议版本。 |
Protocol version of the call statistic maintained by the Server for Network File System (NFS). |
| 56 | 网络文件系统(NFS)服务器维护的调用统计信息的名称。 |
Name of the call statistic maintained by the Server for Network File System (NFS). |
| 57 | 网络文件系统(NFS)服务器维护的调用统计信息的值。 |
Value of the call statistic maintained by the Server for Network File System (NFS). |
| 58 | 重置网络文件系统(NFS)服务器维护的调用统计信息。 |
Reset call statistics maintained by the Server for Network File System (NFS). |
| 59 | 此类表示网络文件系统(NFS)服务器维护的调用统计信息。 |
This class represents call statistics maintained by the Server for Network File System (NFS). |
| 60 | 未安装 |
NotInstalled |
| 61 | 已停止 |
Stopped |
| 62 | 正在运行 |
Running |
| 63 | NFS 服务器服务的当前状态。 |
The current state of Server for NFS Service. |
| 64 | 可以记录的活动有装载、卸载、读取、写入、创建、删除、锁定、解锁、无和所有 |
Activities that can be logged are Mount, Unmount, Read, Write, Create , Delete,Lock, Unlock, none, all |
| 65 | 用于进行字符转换的文件的路径。 |
Path to the file used for character translation. |
| 66 | 目录缓存的大小(以 KB 为单位)。 |
Size of the directory cache (in KB). |
| 67 | 指定是否启用自动续订身份验证。 |
Specifies whether automatic renewal of authentication is enabled. |
| 68 | 指定续订身份验证的时间间隔，将在该间隔后进行续订(以秒为单位)。 |
Specifies the interval after which authentication should be renewed (in secs). |
| 69 | 指定是否启用 NFS v2 支持。 |
Specifies whether NFS v2 support is enabled. |
| 70 | 指定是否启用 NFS v3 支持。 |
Specifies whether NFS v3 support is enabled. |
| 71 | 指定是否启用 NFS v4 支持。 |
Specifies whether NFS v4 support is enabled. |
| 72 | 指定是否应将名称以点开始的文件创建为隐藏文件。 |
Specifies whether files with names beginning in dot should be created as hidden files. |
| 73 | 网络锁定管理器(NLM)宽限期。 |
Network Lock Manager (NLM) grace period. |
| 74 | MAPSVR 程序的协议支持有效值为 TCP 和 UDP |
Protocol support for MAPSVR program valid values are TCP, UDP |
| 75 | Mount 程序的协议有效值为 TCP 和 UDP |
Protocol for Mount program valid values are TCP and UDP |
| 76 | NFS 程序的协议支持有效值为 TCP 和 UDP |
Protocol support for NFS program valid values are TCP and UDP |
| 77 | NIS 程序的协议支持有效值为 TCP 和 UDP |
Protocol support for NIS program valid values are TCP and UDP |
| 78 | NLM 程序的协议支持有效值为 TCP 和 UDP |
Protocol support for NLM program valid values are TCP and UDP |
| 79 | NSM 程序的协议支持有效值为 TCP 和 UDP |
Protocol support for NSM program valid values are TCP and UDP |
| 80 | Portmapper 的协议有效值为 TCP 和 UDP |
Protocol for Portmapper valid values are TCP and UDP |
| 81 | NFSv4 服务器的宽限期。 |
Grace period for NFSv4 server. |
| 82 | 网络组缓存条目的缓存超时(以分钟为单位)。 |
Cache timeout in minutes for entries in netgroup cache. |
| 83 | 启用 PreserveInheritance 时，Windows NFS 服务器将应用可继承的 ACE 并确保这些 ACE 适用于在共享上新创建的文件和文件夹。 |
Windows NFS server applies inheritable ACEs and makes sure that these ACEs apply to newly created files and folder on shares when PreserveInheritance is enabled. |
| 84 | Windows 帐户，Windows NFS 服务器应该用此帐户来表示未在映射存储中配置映射的用户。默认情况下，Windows NFS 服务器使用“NT AUTHORITYnonymous Logon”帐户表示这些用户 |
Windows account which should be used by the Windows NFS server to represent users who have no mapping configured in the mapping store. By default, the Windows NFS server uses the 'NT AUTHORITYnonymous Logon' account to represent these users |
| 85 | Windows 帐户，在使用 AUTH_UNIX 安全保护功能时，Windows NFS 服务器应该用此帐户来表示对文件的 World/Other 权限。默认情况下，Windows NFS 服务器使用“BUILTIN\Everyone”组表示 AUTH UNIX 的 World\Other 权限。 |
Windows account which should be used by the Windows NFS server to represent World/Other permissions on files when using AUTH_UNIX security. By default the Windows NFS server uses 'BUILTIN\Everyone' group to represent World\Other permissions for AUTH UNIX. |
| 86 | 启用时，Windows NFS 服务器将按名称来打开文件和目录，而不是按文件 ID 打开 |
When enabled Windows NFS server opens files and diretories by name, instead of opening by file ID |
| 87 | NFSv4 服务器强制执行的租赁期限(以秒为单位)。 |
Lease period in seconds to be enforced by NFSv4 server. |
| 88 | 清除 Windows NFS 服务器上的映射缓存。 |
Purge mapping cache on Windows NFS server. |
| 89 | 超时间隔(以秒为单位)，在从群集上的一个节点故障转移到其他节点时，达到此间隔后，服务器会将共享作用域在线划分到某个网络名称。 |
Timeout interval in seconds for the server to bring the shares scoped to a network name online when failing over from one node to another on a cluster. |
| 90 | 此类表示网络文件系统(NFS)服务器的配置设置 |
This class represents configuration settings for the Server for Network File System (NFS) |
| 91 | NFS 客户端服务的当前状态。 |
The current state of Client for NFS Service. |
| 92 | 指定安全类型，值可以是 SYS、Krb5 或 Krb5i |
Specify security flavors the values can be SYS, Krb5, Krb5i |
| 93 | 装载的文件共享默认区分大小写。 |
Default case sensitivity of mounted file shares. |
| 94 | 指定文件的权限模式。这些权限将用于在 NFS 服务器上创建的新文件。 |
Specify the permission mode of the file. These are used for new files created on NFS servers. |
| 95 | 装载类型 SOFT 或 HARD。 |
The type of mount SOFT or HARD. |
| 96 | 软装载的重试次数。 |
The number of retries for a soft mount. |
| 97 | 读取缓冲区大小。 |
The read buffer size. |
| 98 | 针对 RPC 调用强制执行的超时(以秒为单位)。 |
The timeout (in seconds) to be enforced for RPC calls. |
| 99 | 首选传输协议的可用值为 TCP 和 UDP |
Preferred transport protocol the possible values are TCP and UDP |
| 100 | 指定是否使用保留的端口(小于 1024)。 |
Specifies whether reserved ports (less than 1024) should be used. |
| 101 | 写入缓冲区大小(以 KB 为单位)。 |
The write buffer size (in KB). |
| 102 | 此类表示网络文件系统(NFS)客户端的配置设置 |
This class represents configuration settings for the Client for Network File System (NFS) |
| 103 | 当前已锁定文件的路径。 |
Path to the file that is currently locked. |
| 104 | NLM |
NLM |
| 105 | NFS |
NFS |
| 106 | 锁定类型 |
Type of lock |
| 107 | 此类表示客户端计算机对属于网络文件系统(NFS)共享的文件持有的锁定。 |
This class represents locks held by client computers on files belonging to a Network File System (NFS) share. |
| 108 | 指定是否从用户名映射(UNM)服务器查询 NFS 帐户映射。 |
Specifies whether NFS account mapping should be queried from a User Name Mapping (UNM) server. |
| 109 | 用户名映射(UNM)服务器。 |
User Name Mapping (UNM) server. |
| 110 | 指定是否从 Active Directory (AD)查询 NFS 帐户映射。 |
Specifies whether NFS account mapping should be queried from Active Directory (AD). |
| 111 | Active Directory (AD)域名。 |
Active Directory (AD) Domain name. |
| 112 | 指定是否从 Active Directory 轻型目录服务(AD LDS)或符合 RFC-2307 的 LDAP 存储查询 NFS 帐户映射。 |
Specifies whether NFS account mapping should be queried from Active Directory Lightweight Directory Services (AD LDS) or an RFC-2307 compliant LDAP store. |
| 113 | Active Directory 轻型目录服务(AD LDS)实例名称。 |
Active Directory Lightweight Directory Services (AD LDS) instance name. |
| 114 | 用于 LDAP 查询的 Active Directory 轻型目录服务(AD LDS)命名上下文。 |
Active Directory Lightweight Directory Services (AD LDS) naming context used for LDAP queries. |
| 115 | 指定是否从本地映射文件(密码或组文件)查询 NFS 帐户映射。 |
Specifies whether NFS account mapping should be queried from the local Mapping Files (passwd or group files). |
| 116 | 此类表示网络文件系统(NFS)的帐户映射配置。 |
This class represents Network File System (NFS) account mapping configuration. |
| 117 | 已配置网络组源，有效值为 none、nis 和 ldap。 |
Configured netgroup source and valid values are none, nis, ldap. |
| 118 | 作为网络组源的 LDAP 服务器名称或 Active Directory 域名。 |
Ldap server name or Active Directory domain name that is source of netgroups. |
| 119 | LDAP 可分辨名称。 |
Ldap Distinguished Name. |
| 120 | NIS 域名。 |
NIS domain name. |
| 121 | 将用作网络组源配置的 NIS 服务器。 |
NIS server that should be used as the source of Netgroup configuration. |
| 122 | 此类表示网络文件系统(NFS)的网络组存储配置。 |
This class represents Network File System (NFS) netgroup store configuration. |
| 123 | 客户端组的名称。 |
Name of the Clientgroup. |
| 124 | 客户端组的成员。 |
Members of the Clientgroup. |
| 125 | 此类表示用于配置网络文件系统(NFS)共享访问的客户端组。 |
This class represents Clientgroups used to configure access to Network File System (NFS) shares. |
| 126 | CreateShareEvent |
CreateShareEvent |
| 127 | ModifyShareEvent |
ModifyShareEvent |
| 128 | RemoveShareEvent |
RemoveShareEvent |
| 129 | 此类表示网络文件系统(NFS)共享上的事件。 |
This class represents events on Network File System (NFS) shares. |
| 130 | 会话标识符。 |
session identifier. |
| 131 | 用于此会话的网络名称。 |
network name used for this session. |
| 132 | 会话的状态。 |
State of the session. |
| 133 | 打开此会话的客户端标识符。 |
client identifier who opened this session. |
| 134 | 为会话分配了最大插槽数的服务器。 |
server allocated maximum number of slots for the session. |
| 135 | 客户端可用的插槽数。 |
number of slots usable by the client. |
| 136 | 服务器供客户端使用的首选插槽数。 |
number of slots the server preferes client use. |
| 137 | 在 Windows NFSv4 服务器上撤消客户端计算机建立的活动会话。 |
Revoke an active session established by a client computer on the Windows NFSv4 server. |
| 138 | 此类表示在服务器上打开的会话。 |
This class represents a session opened on the server. |
| 139 | 客户端标识符。 |
client identifier. |
| 140 | 客户端使用的网络名称。 |
network name used by the client. |
| 141 | 客户端打开的会话数。 |
number of sessions opened by client. |
| 142 | 已确认 |
Confirmed |
| 143 | ReclaimCompleted |
ReclaimCompleted |
| 144 | ClientSupportsReferral |
ClientSupportsReferral |
| 145 | ClientSupportsMigration |
ClientSupportsMigration |
| 146 | BindStateToPrincipal |
BindStateToPrincipal |
| 147 | StateRevokedByAdmin |
StateRevokedByAdmin |
| 148 | StateRevokedByLeaseExpiry |
StateRevokedByLeaseExpiry |
| 149 | AllStateRevoked |
AllStateRevoked |
| 150 | LeaseExpired |
LeaseExpired |
| 151 | SessionCreateInProgress |
SessionCreateInProgress |
| 152 | 指明客户端功能的标志。 |
Flags indicating the capabilities of the client. |
| 153 | 最先与服务器通信的客户端的 IP 地址。 |
IP Address of client on which first communication to server was received. |
| 154 | 撤消客户端上的租约。 |
Revoke the lease on the client. |
| 155 | 此类表示 NFS V4 服务器的客户端。 |
This class represents a client of NFS V4 server. |
| 156 | 状态标识符。 |
state identifier. |
| 157 | 客户端为此已打开文件连接到的网络名称。 |
network name to which the client connected for this open file. |
| 158 | 打开此文件的客户端。 |
client who opened this file. |
| 159 | 已打开文件的名称。 |
name of the opened file. |
| 160 | 读取 |
READ |
| 161 | 写入 |
WRITE |
| 162 | READWRITE |
READWRITE |
| 163 | 为进行读取、写入或读写而打开的文件。 |
file opened for read, write or readwrite. |
| 164 | 无 |
NONE |
| 165 | 打开此文件时使用的共享模式。 |
Sharing mode used when opening this file. |
| 166 | 已锁定此文件的用户帐户。 |
User account who locked this file. |
| 167 | 关闭当前由 NFS 客户端计算机保持打开状态的指定文件的文件句柄。 |
Close the file handle for the specified file currently held open by the NFS client computer. |
| 168 | 此类表示在 NFS V4 服务器上打开的文件。 |
This class represents a file opened on NFS V4 server. |
| 169 | 客户端为此已锁定文件连接到的网络名称。 |
network name to which the client connected for this locked file. |
| 170 | 已锁定此文件的客户端。 |
client who locked this file. |
| 171 | 此类表示 NFSv4 服务器上的已锁定文件。 |
This class represents a locked file on NFSv4 server. |
| 172 | 客户端计算机的名称。 |
Name of the client computer. |
| 0x1000 | MSG_NFS_FIRST_MESSAGE_START |
MSG_NFS_FIRST_MESSAGE_START |
| 0x40001001 | 正在枚举 NFS 共享 |
Enumerating NFS shares |
| 0x40001002 | 正在目标“%1!s!”上执行“删除共享”操作。 |
Performing operation \"Remove Share\" on Target \"%1!s!\". |
| 0x40001003 | 正在目标“%1!s!”上执行“修改共享”操作。 |
Performing operation \"Modify Share\" on Target \"%1!s!\". |
| 0x40001004 | 正在目标“%1!s!”上执行“创建共享”操作。 |
Performing operation \"Create Share\" on Target \"%1!s!\". |
| 0x40001005 | 正在共享“%2!s!”上对客户端“%1!s!”执行“删除权限”操作。 |
Performing operation \"Remove Permission\" to client \"%1!s!\" on share \"%2!s!\". |
| 0x40001006 | 正在共享“%2!s!”上对客户端“%1!s!”执行“授予权限”操作。 |
Performing operation \"Grant Permission\" to client \"%1!s!\" on share \"%2!s!\". |
| 0x40001007 | 正在目标“%1!s!”上执行“设置权限”操作。 |
Performing operation \"Set Permission\" on target \"%1!s!\". |
| 0x40001009 | 用户已取消枚举操作。 |
Enumeration operation cancelled by user. |
| 0x40001016 | 正在 NFS 服务器统计信息上执行“重置计数器”操作。 |
Performing operation \"Reset Counters\" on NFS server statistics. |
| 0x40001019 | NFS 服务器已配置为使用 LDAP 作为网络组源。 |
NFS server is configured to use LDAP as netgroup source. |
| 0x4000101A | NFS 服务器已配置为使用 NIS 服务器作为网络组源。 |
NFS server is configured to use NIS server as netgroup source. |
| 0x4000101B | 正在网络组“%1!s!”上执行“修改”操作。 |
Performing operation \"Modify\" on netgroup \"%1!s!\". |
| 0x4000101C | 正在 LDAP 服务器“%2!s!”上执行“创建网络组”%1!s! 操作。 |
Performing operation \"Create Netgroup\" %1!s! on LDAP server \"%2!s!\". |
| 0x4000101D | 正在目标 %1!s! 上执行“删除网络组”操作。 |
Performing operation \"Delete Netgroup\" on Target %1!s!. |
| 0x40001029 | 正在目标“%1!s!”上执行“修改客户端组”操作。 |
Performing operation \"Modify Clientgroup\" on Target \"%1!s!\". |
| 0x4000102A | 正在目标“%1!s!”上执行“重命名客户端组”操作。 |
Performing operation \"Rename Clientgroup\" on Target \"%1!s!\". |
| 0x4000102B | 正在目标“%1!s!”上执行“删除客户端组”操作。 |
Performing operation \"Delete Clientgroup\" on Target \"%1!s!\". |
| 0x4000102C | 正在目标“%1!s!”上执行“创建客户端组”操作。 |
Performing operation \"Create Clientgroup\" on Target \"%1!s!\". |
| 0x40001030 | 正在目标“%1!s!”上执行“断开会话连接”操作。
|
Performing operation \"Disconnect Session\" on Target \"%1!s!\". |
| 0x40001031 | 正在目标“%1!s!”上执行“撤消打开的文件”操作。 |
Performing operation \"Revoke Open File\" on Target \"%1!s!\". |
| 0x40001032 | |
|
| 0x40001038 | AuthRenewalInterval 已设置为默认值 %1!d! 秒。 |
AuthRenewalInterval is set to default value of %1!d! seconds. |
| 0x4000103D | 正在创建新网络文件系统群集资源。 |
Creating a new Network File System cluster resource. |
| 0x4000103E | 正在网络文件系统群集资源“%1!s!”上执行“删除”操作。 |
Performing operation \"Delete\" on Network File System cluster resource \"%1!s!\". |
| 0x4000103F | 网络文件系统群集资源未承载任何其他共享，因此可将其删除。 |
There are no more shares hosted by Network File System cluster resource and it can be deleted. |
| 0x4000104E | 必须重新启动 NFS 服务才能使更改生效。 |
NFS service must be restarted for the changes to take effect. |
| 0x4000104F | 正在目标“%1!s!”上执行“撤消锁定”操作。 |
Performing operation \"Revoke Lock\" on Target \"%1!s!\". |
| 0x4000105F | 正在验证 %1!s! 是否可以访问以及域功能级别是否为 Windows Server 2003 R2 或更高版本... |
Verifying %1!s! is reachable and domain functional level is Windows Server 2003 R2 or above... |
| 0x40001060 | 正在验证 AD LDS 服务器 %1!s! 是否可以访问以及是否包含身份映射架构扩展... |
Verifying AD LDS server %1!s! is reachable and contains identity mapping schema extensions... |
| 0x40001061 | NFS 映射存储测试已成功完成。 |
NFS mapping store test completed successfully. |
| 0x40001062 | NFS 服务器未配置为使用域或 AD LDS 服务器作为映射存储。尚未执行任何测试。 |
NFS server is not configured to use domain or AD LDS server as mapping store. No tests have been performed. |
| 0x40001063 | 正在目标“%1!s!”上执行“撤消客户端”操作。 |
Performing operation \"Revoke Client\" on Target %1!s!. |
| 0x80001008 | 无法从共享中删除“所有计算机”权限。请使用 grant-nfspermission 管理所有计算机访问。 |
All Machines permission cannot be removed from a share. Please use grant-nfspermission to manage all machines access. |
| 0x8000101F | 网络组“%2!s!”的网络组成员三重值“%1!s!”无效。 |
Netgroup member triple value \"%1!s!\" for netgroup \"%2!s!\" is invalid. |
| 0x80001020 | 网络组“%2!s!”中不存在网络组成员“%1!s!”。 |
Netgroup member \"%1!s!\" does not exist in netgroup \"%2!s!\". |
| 0x80001021 | NIS 中的网络组值无效。 |
Netgroup value from NIS is invalid. |
| 0x80001025 | 客户端组“%1!s!”中已存在成员“%2!s!”。 |
Member \"%2!s!\" already exists for client group \"%1!s!\". |
| 0x80001026 | 成员“%2!s!”不属于客户端组“%1!s!”。 |
Member \"%2!s!\" does not belong to client group \"%1!s!\". |
| 0x80001037 | EnableAuthRenewal 处于禁用状态时无法设置 AuthRenewalInterval。AuthRenewalInterval 的现有值将重置为 none。 |
AuthRenewalInterval cannot be set when EnableAuthRenewal is disabled. The existing value of AuthRenewalInterval will be reset to none. |
| 0x80001064 | 已禁用根目录访问，因为“所有计算机”权限为 no-access。 |
Root access is disbled as \"All Machines\" permission is no-access. |
| 0x80001065 | 共享上已启用未映射的 Unix 用户访问或匿名访问，但是 AUTH_SYS 身份验证协议已禁用。服务器已在共享上自动启用 AUTH_SYS。 |
Unmapped unix user or anonymous access is enabled on the share but AUTH_SYS authentication protocol is disabled. The server has automatically enabled AUTH_SYS on the share. |
| 0xC000100A | NFS 共享“%1!s!”不存在。 |
Nfs share \"%1!s!\" does not exist. |
| 0xC000100B | 指定的客户端“%1!s!”不存在。 |
Specified client \"%1!s!\" does not exist. |
| 0xC000100C | 指定的共享路径不存在。 |
The share path specified does not exist. |
| 0xC000100D | 无法导出非本地驱动器上的共享。 |
Cannot export a share on non-local drive. |
| 0xC000100E | 该路径的父目录已共享。 |
A parent directory of the path has already been shared. |
| 0xC000100F | 该路径的某个子目录已共享。 |
A subdirectory of the path has already been shared. |
| 0xC0001010 | 指定的共享不存在。 |
Specified share does not exist. |
| 0xC0001011 | 该路径已共享。 |
The path has already been shared. |
| 0xC0001012 | 由于此计算机上未安装所需的代码页，因此无法使用指定的编码选项共享目录。请安装相应的语言支持，然后重试。 |
Cannot share directory with the given encoding option since a required code page is not installed on this machine. Please install the appropriate language support and retry. |
| 0xC0001013 | NFS 不支持目标卷中的文件系统。 |
The file system in the target volume is not supported by NFS. |
| 0xC0001014 | NFS 服务器服务不可用。 |
The Server For NFS service is unavailable. |
| 0xC0001015 | 指定的共享名正在使用中。 |
The specified share name is already in use. |
| 0xC0001017 | NFS 服务器上未配置网络组源。 |
Netgroup source is not configured on NFS server. |
| 0xC0001018 | 网络组源未配置为使用 LDAP。该操作只能在 LDAP 上执行。 |
Netgroup source is not configured to use LDAP. The operation can only be performed on LDAP. |
| 0xC000101E | 对目标 %1!s! 的删除网络组操作失败。 |
Delete netgroup operation failed on target %1!s!. |
| 0xC0001022 | 网络组“%1!s!”已存在。 |
Netgroup \"%1!s!\" already exists. |
| 0xC0001023 | 网络组“%1!s!”不存在。 |
Netgroup \"%1!s!\" does not exist. |
| 0xC0001024 | 无法在“%1!s!”查找密码文件。 |
Failed to lookup passwd file at \"%1!s!\". |
| 0xC0001027 | 客户端组“%1!s!”已存在。 |
Client group \"%1!s!\" already exists. |
| 0xC0001028 | 客户端组“%1!s!”不存在。 |
Client group \"%1!s!\" does not exist. |
| 0xC000102D | 无法在共享上启用匿名访问和未映射访问。 |
Both anonymous and unmapped access cannot be enabled on the share. |
| 0xC000102E | 无法解析 %1!s! Windows 帐户 %2!s! 的身份映射。请验证是否已在服务器上配置映射存储。 |
Failed to resolve identity mapping for %1!s! windows account %2!s!. Verify if mapping store is configured on the server. |
| 0xC000102F | 无法解析 %1!s! 标识符 %2!d! 的身份映射。请验证是否已在服务器上配置映射存储。 |
Failed to resolve identity mapping for %1!s! identifier %2!d!. Verify if mapping store is configured on the server. |
| 0xC0001033 | 无法执行请求的操作。 |
Failed to perform the requested operation. |
| 0xC0001034 | 不支持此操作，因为在服务器上只能创建 %1!d! 个客户端组。 |
This operation is not supported as only %1!d! Clientgroups can be created on the server. |
| 0xC0001035 | 不支持此操作，因为客户端组只能包含 %1!d! 个成员。 |
This operation is not supported as a Clientgroup can contain only %1!d! members. |
| 0xC0001036 | AuthRenewalInterval 必须是在 1 到 %1!d! 范围内的一个正整数。 |
AuthRenewalInterval must be a positive integer within range 1 and %1!d!. |
| 0xC0001039 | 无法识别指定路径 %1!s! 的群集磁盘资源。 |
Failed to identify cluster disk resource for given path %1!s!. |
| 0xC000103A | 无法识别 %1!s! 的群集网络名称资源。 |
Failed to identify cluster network name resource for %1!s!. |
| 0xC000103B | 无法识别网络文件系统群集资源。 |
Failed to identify Network File System cluster resource. |
| 0xC000103C | 无法创建新网络文件系统群集资源。 |
Failed to create a new Network File System cluster resource. |
| 0xC0001040 | NLM 宽限期必须是在 1 到 %1!d! 范围内的一个正整数。 |
Nlm grace period must be a positive integer within range 1 and %1!d!. |
| 0xC0001041 | 宽限期必须是在 %1!d! 到 %2!d! 范围内的一个正整数。 |
Grace period must be a positive integer within range %1!d! and %2!d!. |
| 0xC0001042 | 租赁期限必须是在 %1!d! 到 %2!d! 范围内的一个正整数。 |
Lease period must be a positive integer within range %1!d! and %2!d!. |
| 0xC0001043 | 联机超时必须是在 %1!d! 到 %2!d! 范围内的一个正整数。 |
Online timeout must be a positive integer within range %1!d! and %2!d!. |
| 0xC0001044 | 宽限期必须至少为租赁期限值的两倍。 |
Grace period must be at least twice lease period value. |
| 0xC0001045 | 无法刷新映射缓存。 |
Failed to flush mapping cache. |
| 0xC0001046 | 别名无效 - 请确保别名中不包含空格、冒号、反斜杠、多个连续的正斜杠、DBCS 字符或 8 位片假名 |
Invalid alias - ensure that the alias does not contain space(s), colon(s), backslash(s), multiple consecutive forward slashes, DBCS character(s), or 8-bit katakana |
| 0xC0001047 | 只能启用以下映射存储之一: 用户名映射服务器或 Active Directory 域或 AD LDS (LDAP)。 |
Only one of following mapping stores can be enabled: Username mapping server or Active Directory Domain or AD LDS (LDAP). |
| 0xC0001048 | 指定有效服务器以启用用户名映射存储查找。 |
Specify a valid server to enable Username Mapping store lookup. |
| 0xC0001049 | 指定有效域名以启用 Active Directory 映射存储查找。 |
Specify a valid domain name to enable Active Directory mapping store lookup. |
| 0xC000104A | 指定有效 AD LDS 服务器以启用 LDAP 映射存储查找。 |
Specify a valid AD LDS server to enable LDAP mapping store lookup. |
| 0xC000104B | “%1!s!”无效。 |
\"%1!s!\" is not valid. |
| 0xC000104C | 指定的 DefaultAccessMode 无效。有效八进制值必须在 0 到 777 的范围内。 |
Specified DefaultAccessMode is invalid. The valid octal value must be within range 0 and 777. |
| 0xC000104D | 无法禁用所有协议版本。必须至少启用以下某一项：NFS v2、v3 或 v4。 |
All protocol versions cannot be disabled. At least one of NFS v2, v3 or v4 must be enabled. |
| 0xC0001050 | 指定的 NetgroupStoreType 无效。有效值为: ldap、nis 和 none。 |
Specified NetgroupStoreType is not valid. Valid values are: ldap, nis, none. |
| 0xC0001051 | 指定的 LDAP 网络组存储“%1!s!”无效。 |
The specified LDAP netgroup store \"%1!s!\" is not valid. |
| 0xC0001052 | 目录缓存值无效。DirectoryCacheSize 的有效值是 4 的倍数，并且在 4 到 128 之间。 |
Invalid directory cache value. The valid values for DirectoryCacheSize are in multiples of 4 from 4 to 128. |
| 0xC0001053 | 转换文件无效。请验证指定的位置是否存在该文件。 |
Invalid translation file. Verify if the file exists in specified location. |
| 0xC0001054 | 装载类型无效。有效值为 soft 和 hard。 |
Mount type is invalid. Valid values are soft and hard. |
| 0xC0001055 | 指定的 MountRetryAttempts 值超出预期范围。最大值为 %1!d!。 |
Specified MountRetryAttempts value is out of expected range. Maximum value is %1!d!. |
| 0xC0001056 | RPC 超时必须是在 %1!d! 到 %2!d! (含两者)范围内的一个正整数。 |
RPC timeout must be a positive integer within inclusive range of %1!d! and %2!d!. |
| 0xC0001057 | 指定的缓冲区大小无效。该值必须是以下某个值：1、2、4、8、16、32、64、128、256、512 或 1024。 |
Specified buffer size is not valid. The value must be one of these 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024. |
| 0xC0001058 | 指定的身份验证值无效。有效值为 sys、krb5、krb5i、krb5p、default 和 all。 |
Specified authentication value is invalid. Valid values are sys, krb5, krb5i, krb5p, default, all. |
| 0xC0001059 | 指定的协议值无效。有效值为 tcp 和 udp。 |
Specified protocol value is invalid. Valid values are tcp and udp. |
| 0xC000105A | 指定要添加或从组中删除的成员。 |
Specify members to add or remove from the group. |
| 0xC000105B | 不支持此操作，因为未启用 NFS V4 协议。 |
This operation is not supported as NFS V4 protocol is not enabled. |
| 0xC000105C | 域功能级别必须是 Windows Server 2003 R2 或更高版本，才能将域配置为映射存储。 |
Domain functional level must be Windows Server 2003 R2 or above to configure the domain as mapping store. |
| 0xC000105D | 无法连接到域或 AD LDS 映射存储 %1!s!。请确保 NFS 服务器可以访问该映射存储，以便检索身份映射配置。 |
Failed to connect to domain or AD LDS mapping store %1!s!. Please make sure that the NFS server can reach the mapping store in order to retrieve the identity mapping configuration. |
| 0xC000105E | AD LDS 服务器上不存在配置身份映射所需的架构扩展。 |
The schema extensions required for configuring the identity mapping are not present on the AD LDS server. |
| 0xC0001066 | 找不到具有以下指定项的共享权限: %1!s!%2!s!%3!s!%4!s!%5!s!%6!s!。 |
Cannot find a share permission with specified%1!s!%2!s!%3!s!%4!s!%5!s!%6!s!. |
| 0xC0001067 | 无法访问身份映射存储“%1!s!”。请指定用于启用查找的有效身份映射存储。 |
Identity mapping store \"%1!s!\" is not accessible. Specify a valid identity mapping store to enable lookup. |