If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.
| id |
Chinese (Simplified) |
English |
| 0x800503EA | IPMI 设备驱动程序读取的管理员提供的参数无效。设备驱动程序将使用相应的系统定义默认值。 |
The IPMI device driver read an administrator supplied parameter that is invalid. The device driver will use a system defined default value in its place. |
| 0x800503EC | IPMI 设备驱动程序尝试在正常运行期间与 IPMI BMC 设备进行通讯。但是通讯因为超时而失败。可以增加与 IPMI 设备驱动程序关联的超时值。 |
The IPMI device driver attempted to communicate with the IPMI BMC device during normal operation. However the communication failed due to a timeout. You can increase the timeouts associated with the IPMI device driver. |
| 0xC00503E8 | 在与 IPMI BMC 设备进行通信期间，系统检测到 BMC 已进入错误状态。驱动程序尝试将 BMC 状态设置为工作状态，但是失败。在连续尝试 20 次之后，驱动程序已将 IPMI 设备设置为非工作状态。建议你向 BMC 设备制造商寻求帮助。你可以使设备实例恢复工作状态，方法是禁用然后再启用标记为“IPMI 设备驱动程序”的 IPMI 设备实例。可以在设备管理器用户界面中找到 IPMI 设备实例。 |
During communication with the IPMI BMC device, the system detected that the BMC entered an error state. The driver attempted to set the BMC state to a working state but failed to do so. After 20 successive attempts, the driver has set the IPMI device to a non working state. It is recommended that you seek assistance from the BMC device manufacturer. You can return the device instance to the working state by disabling and enabling the IPMI device instance labeled ‘IPMI Device Driver’. You can locate the IPMI device instance within the Device Manager user interface. |
| 0xC00503E9 | IPMI 设备驱动程序尝试确定系统是否支持 IPMI BMC 设备。驱动程序尝试通过搜索 Type38 记录的 SMBIOS 来检测 IPMI BMC 是否存在。但是未找到任何记录或记录与设备驱动程序的版本不兼容。如果检测到 SMBIOS Type38 记录，事件的“转储数据”字段将包含记录的二进制表示形式。 |
The IPMI device driver attempted to determine if the system supported an IPMI BMC device. The driver attempted to detect the presence of the IPMI BMC by searching the SMBIOS for a Type38 record. But either no record was found or the record was not compatible with the version of the device driver. If a SMBIOS Type 38 record was detected, the Dump Data field of the event contains a binary representation of the record. |
| 0xC00503EB | IPMI 设备驱动程序在创建设备期间尝试与 IPMI BMC 设备进行通讯。但是通讯因为超时而失败。配置的超时值太小，而 IPMI BMC 设备响应需要的时间长于超时，或 BMC 存在技术缺陷。可以增加与 IPMI 设备驱动程序关联的超时值，或向 BMC 设备制造商寻求帮助。 |
The IPMI device driver attempted to communicate with the IPMI BMC device during device creation. However the communication failed due to a timeout. Either the configured timeouts are too small and the IPMI BMC device responses take longer than the timeouts or the BMC has a technical fault. You can increase the timeouts associated with the IPMI device driver or seek assistance from the BMC device manufacturer. |