Winrs.exe winrs 909f78b94d41d737b9913ff0d8e9bc3a

File info

File name: Winrs.exe.mui
Size: 18432 byte
MD5: 909f78b94d41d737b9913ff0d8e9bc3a
SHA1: b57970e3089e0f06cb14f8b9824ab59b4215faae
SHA256: 8ac64a0681cbd520bf207cef6942bf985be3e2a68b48ddc06f3a056404a92ba9
Operating systems: Windows 10
Extension: MUI
In x64: Winrs.exe winrs (32-bit)

Translations messages and strings

If an error occurred or the following message in English (U.S.) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id English (U.S.) English
1
USAGE
=====
(ALL UPPER-CASE = value that must be supplied by user.)

winrs [-/SWITCH[:VALUE]] COMMAND

COMMAND - Any string that can be executed as a command in the cmd.exe shell.

SWITCHES
========
(All switches accept both short form or long form. For example both -r and
-remote are valid.)

-r[emote]:ENDPOINT - The target endpoint using a NetBIOS name or the standard connection URL: [TRANSPORT://]TARGET[:PORT]. If not specified
-r:localhost is used.

-un[encrypted] - Specify that the messages to the remote shell will not be encrypted. This is useful for troubleshooting, or when the network traffic is already encrypted using ipsec, or when physical security is enforced. By default the messages are encrypted using Kerberos or NTLM keys. This switch is ignored when HTTPS transport is selected.

-u[sername]:USERNAME - Specify username on command line. If not specified the tool will use Negotiate authentication or prompt for the name.
If -username is specified, -password must be as well.

-p[assword]:PASSWORD - Specify password on command line. If -password is not specified but -username is the tool will prompt for the password. If -password is specified, -user must be specified as well.

-t[imeout]:SECONDS - This option is deprecated.

-d[irectory]:PATH - Specifies starting directory for remote shell. If not specified the remote shell will start in the user's home directory defined by the environment variable %USERPROFILE%.

-env[ironment]:STRING=VALUE - Specifies a single environment variable to be set when shell starts, which allows changing default environment for shell. Multiple occurrences of this switch must be used to specify multiple environment variables.

-noe[cho] - Specifies that echo should be disabled. This may be necessary to ensure that user's answers to remote prompts are not displayed locally. By default echo is "on".

-nop[rofile] - Specifies that the user's profile should not be loaded. By default the server will attempt to load the user profile. If the remote user is not a local administrator on the target system then this option will be required (the default will result in error).

-a[llow]d[elegate] - Specifies that the user's credentials can be used to access a remote share, for example, found on a different machine than the target endpoint.

-comp[ression] - Turn on compression. Older installations on remote machines may not support compression so it is off by default.

-[use]ssl - Use an SSL connection when using a remote endpoint. Specifying this instead of the transport "https:" will use the default WinRM default port.

-? - Help

To terminate the remote command the user can type Ctrl-C or Ctrl-Break, which will be sent to the remote shell. The second Ctrl-C will force termination of winrs.exe.

To manage active remote shells or WinRS configuration, use the WinRM tool. The URI alias to manage active shells is shell/cmd. The URI alias for WinRS configuration is winrm/config/winrs. Example usage can be found in the WinRM tool by typing "WinRM -?".

Examples:
winrs -r:https://myserver.com command
winrs -r:myserver.com -usessl command
winrs -r:myserver command
winrs -r:http://127.0.0.1 command
winrs -r:http://169.51.2.101:80 -unencrypted command
winrs -r:https://[::FFFF:129.144.52.38] command
winrs -r:http://[1080:0:0:0:8:800:200C:417A]:80 command
winrs -r:https://myserver.com -t:600 -u:administrator -p:$%fgh7 ipconfig
winrs -r:myserver -env:PATH=^%PATH^%;c:\tools -env:TEMP=d:\temp config.cmd
winrs -r:myserver netdom join myserver /domain:testdomain /userd:johns /passwordd:$%fgh789
winrs -r:myserver -ad -u:administrator -p:$%fgh7 dir \\anotherserver\share

USAGE
=====
(ALL UPPER-CASE = value that must be supplied by user.)

winrs [-/SWITCH[:VALUE]] COMMAND

COMMAND - Any string that can be executed as a command in the cmd.exe shell.

SWITCHES
========
(All switches accept both short form or long form. For example both -r and
-remote are valid.)

-r[emote]:ENDPOINT - The target endpoint using a NetBIOS name or the standard connection URL: [TRANSPORT://]TARGET[:PORT]. If not specified
-r:localhost is used.

-un[encrypted] - Specify that the messages to the remote shell will not be encrypted. This is useful for troubleshooting, or when the network traffic is already encrypted using ipsec, or when physical security is enforced. By default the messages are encrypted using Kerberos or NTLM keys. This switch is ignored when HTTPS transport is selected.

-u[sername]:USERNAME - Specify username on command line. If not specified the tool will use Negotiate authentication or prompt for the name.
If -username is specified, -password must be as well.

-p[assword]:PASSWORD - Specify password on command line. If -password is not specified but -username is the tool will prompt for the password. If -password is specified, -user must be specified as well.

-t[imeout]:SECONDS - This option is deprecated.

-d[irectory]:PATH - Specifies starting directory for remote shell. If not specified the remote shell will start in the user's home directory defined by the environment variable %USERPROFILE%.

-env[ironment]:STRING=VALUE - Specifies a single environment variable to be set when shell starts, which allows changing default environment for shell. Multiple occurrences of this switch must be used to specify multiple environment variables.

-noe[cho] - Specifies that echo should be disabled. This may be necessary to ensure that user's answers to remote prompts are not displayed locally. By default echo is "on".

-nop[rofile] - Specifies that the user's profile should not be loaded. By default the server will attempt to load the user profile. If the remote user is not a local administrator on the target system then this option will be required (the default will result in error).

-a[llow]d[elegate] - Specifies that the user's credentials can be used to access a remote share, for example, found on a different machine than the target endpoint.

-comp[ression] - Turn on compression. Older installations on remote machines may not support compression so it is off by default.

-[use]ssl - Use an SSL connection when using a remote endpoint. Specifying this instead of the transport "https:" will use the default WinRM default port.

-? - Help

To terminate the remote command the user can type Ctrl-C or Ctrl-Break, which will be sent to the remote shell. The second Ctrl-C will force termination of winrs.exe.

To manage active remote shells or WinRS configuration, use the WinRM tool. The URI alias to manage active shells is shell/cmd. The URI alias for WinRS configuration is winrm/config/winrs. Example usage can be found in the WinRM tool by typing "WinRM -?".

Examples:
winrs -r:https://myserver.com command
winrs -r:myserver.com -usessl command
winrs -r:myserver command
winrs -r:http://127.0.0.1 command
winrs -r:http://169.51.2.101:80 -unencrypted command
winrs -r:https://[::FFFF:129.144.52.38] command
winrs -r:http://[1080:0:0:0:8:800:200C:417A]:80 command
winrs -r:https://myserver.com -t:600 -u:administrator -p:$%fgh7 ipconfig
winrs -r:myserver -env:PATH=^%PATH^%;c:\tools -env:TEMP=d:\temp config.cmd
winrs -r:myserver netdom join myserver /domain:testdomain /userd:johns /passwordd:$%fgh789
winrs -r:myserver -ad -u:administrator -p:$%fgh7 dir \\anotherserver\share
2Winrs error: Command is missing Winrs error: Command is missing
3Winrs.exe: Unrecognized switch " Winrs.exe: Unrecognized switch "
4Winrs.exe: Invalid Timeout Value " Winrs.exe: Invalid Timeout Value "
5Winrs.exe: Invalid Encrypt Value " Winrs.exe: Invalid Encrypt Value "
6Winrs.exe: duplicate switch " Winrs.exe: duplicate switch "
7Winrs error: remote shell has been closed due to timeout or deleted by the administrator. The current command has been terminated. Winrs error: remote shell has been closed due to timeout or deleted by the administrator. The current command has been terminated.
8Use "winrs -?" to obtain the usage information Use "winrs -?" to obtain the usage information
9winrs.exe: Missing directory value winrs.exe: Missing directory value
10winrs.exe: Missing environment value winrs.exe: Missing environment value
11winrs.exe: Missing timeout value winrs.exe: Missing timeout value
12winrs.exe: Missing username value winrs.exe: Missing username value
13winrs.exe: Missing password value winrs.exe: Missing password value
14winrs.exe: Missing remote value winrs.exe: Missing remote value
15Winrs.exe: The "-noecho" switch can be used for character file input only, it cannot be used with pipes. Winrs.exe: The "-noecho" switch can be used for character file input only, it cannot be used with pipes.
16Terminate the shell (%c/%c)? Terminate the shell (%c/%c)?
17Y Y
18N N
19
USAGE
=====
(ALL UPPER-CASE = value that must be supplied by user.)

winrs [-/SWITCH[:VALUE]] COMMAND

COMMAND - Any string that can be executed as a command in the cmd.exe shell.

SWITCHES
========
(All switches accept both short form or long form. For example both -r and
-remote are valid.)

-r[emote]:ENDPOINT - The target endpoint using a NetBIOS name or the standard connection URL: [TRANSPORT://]TARGET[:PORT]. If not specified
-r:localhost is used.

-un[encrypted] - Specify that the messages to the remote shell will not be encrypted. This is useful for troubleshooting, or when the network traffic is already encrypted using ipsec, or when physical security is enforced. By default the messages are encrypted using Kerberos or NTLM keys. This switch is ignored when HTTPS transport is selected.

-u[sername]:USERNAME - Specify username on command line. If not specified the tool will use Negotiate authentication or prompt for the name.
If -username is specified, -password must be as well.

-p[assword]:PASSWORD - Specify password on command line. If -password is not specified but -username is the tool will prompt for the password. If -password is specified, -user must be specified as well.

-t[imeout]:SECONDS - This option is deprecated.

-d[irectory]:PATH - Specifies starting directory for remote shell. If not specified the remote shell will start in the user's home directory defined by the environment variable %USERPROFILE%.

-env[ironment]:STRING=VALUE - Specifies a single environment variable to be set when shell starts, which allows changing default environment for shell. Multiple occurrences of this switch must be used to specify multiple environment variables.

-noe[cho] - Specifies that echo should be disabled. This may be necessary to ensure that user's answers to remote prompts are not displayed locally. By default echo is "on".

-nop[rofile] - Specifies that the user's profile should not be loaded. By default the server will attempt to load the user profile. If the remote user is not a local administrator on the target system then this option will be required (the default will result in error).

-comp[ression] - Turn on compression. Older installations on remote machines may not support compression so it is off by default.

-[use]ssl - Use an SSL connection when using a remote endpoint. Specifying this instead of the transport "https:" will use the default WinRM default port.

-? - Help

To terminate the remote command the user can type Ctrl-C or Ctrl-Break, which will be sent to the remote shell. The second Ctrl-C will force termination of winrs.exe.

To manage active remote shells or WinRS configuration, use the WinRM tool. The URI alias to manage active shells is shell/cmd. The URI alias for WinRS configuration is winrm/config/winrs. Example usage can be found in the WinRM tool by typing "WinRM -?".

Examples:
winrs -r:https://myserver.com command
winrs -r:myserver.com -usessl command
winrs -r:myserver command
winrs -r:http://127.0.0.1 command
winrs -r:http://169.51.2.101:80 -unencrypted command
winrs -r:https://[::FFFF:129.144.52.38] command
winrs -r:http://[1080:0:0:0:8:800:200C:417A]:80 command
winrs -r:https://myserver.com -t:600 -u:administrator -p:$%fgh7 ipconfig
winrs -r:myserver -env:PATH=^%PATH^%;c:\tools -env:TEMP=d:\temp config.cmd
winrs -r:myserver netdom join myserver /domain:testdomain /userd:johns /passwordd:$%fgh789

USAGE
=====
(ALL UPPER-CASE = value that must be supplied by user.)

winrs [-/SWITCH[:VALUE]] COMMAND

COMMAND - Any string that can be executed as a command in the cmd.exe shell.

SWITCHES
========
(All switches accept both short form or long form. For example both -r and
-remote are valid.)

-r[emote]:ENDPOINT - The target endpoint using a NetBIOS name or the standard connection URL: [TRANSPORT://]TARGET[:PORT]. If not specified
-r:localhost is used.

-un[encrypted] - Specify that the messages to the remote shell will not be encrypted. This is useful for troubleshooting, or when the network traffic is already encrypted using ipsec, or when physical security is enforced. By default the messages are encrypted using Kerberos or NTLM keys. This switch is ignored when HTTPS transport is selected.

-u[sername]:USERNAME - Specify username on command line. If not specified the tool will use Negotiate authentication or prompt for the name.
If -username is specified, -password must be as well.

-p[assword]:PASSWORD - Specify password on command line. If -password is not specified but -username is the tool will prompt for the password. If -password is specified, -user must be specified as well.

-t[imeout]:SECONDS - This option is deprecated.

-d[irectory]:PATH - Specifies starting directory for remote shell. If not specified the remote shell will start in the user's home directory defined by the environment variable %USERPROFILE%.

-env[ironment]:STRING=VALUE - Specifies a single environment variable to be set when shell starts, which allows changing default environment for shell. Multiple occurrences of this switch must be used to specify multiple environment variables.

-noe[cho] - Specifies that echo should be disabled. This may be necessary to ensure that user's answers to remote prompts are not displayed locally. By default echo is "on".

-nop[rofile] - Specifies that the user's profile should not be loaded. By default the server will attempt to load the user profile. If the remote user is not a local administrator on the target system then this option will be required (the default will result in error).

-comp[ression] - Turn on compression. Older installations on remote machines may not support compression so it is off by default.

-[use]ssl - Use an SSL connection when using a remote endpoint. Specifying this instead of the transport "https:" will use the default WinRM default port.

-? - Help

To terminate the remote command the user can type Ctrl-C or Ctrl-Break, which will be sent to the remote shell. The second Ctrl-C will force termination of winrs.exe.

To manage active remote shells or WinRS configuration, use the WinRM tool. The URI alias to manage active shells is shell/cmd. The URI alias for WinRS configuration is winrm/config/winrs. Example usage can be found in the WinRM tool by typing "WinRM -?".

Examples:
winrs -r:https://myserver.com command
winrs -r:myserver.com -usessl command
winrs -r:myserver command
winrs -r:http://127.0.0.1 command
winrs -r:http://169.51.2.101:80 -unencrypted command
winrs -r:https://[::FFFF:129.144.52.38] command
winrs -r:http://[1080:0:0:0:8:800:200C:417A]:80 command
winrs -r:https://myserver.com -t:600 -u:administrator -p:$%fgh7 ipconfig
winrs -r:myserver -env:PATH=^%PATH^%;c:\tools -env:TEMP=d:\temp config.cmd
winrs -r:myserver netdom join myserver /domain:testdomain /userd:johns /passwordd:$%fgh789

EXIF

File Name:Winrs.exe.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-winrsplugins.resources_31bf3856ad364e35_10.0.15063.0_en-us_cab22d58f93425a2\
File Size:18 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:17920
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Dynamic link library
File Subtype:0
Language Code:English (U.S.)
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:winrs
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:winrs.exe
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:winrs.exe.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Directory:%WINDIR%\WinSxS\wow64_microsoft-windows-winrsplugins.resources_31bf3856ad364e35_10.0.15063.0_en-us_d506d7ab2d94e79d\

What is Winrs.exe.mui?

Winrs.exe.mui is Multilingual User Interface resource file that contain English (U.S.) language for file Winrs.exe (winrs).

File version info

File Description:winrs
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:winrs.exe
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:winrs.exe.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x409, 1200