| 1 | SMB Direct Connection |
SMB Direct Connection |
| 3 | SMB 直通连接性能计数器集由测量连接活动的计数器组成。一台计算机可以建立多个 SMB 直通连接。SMB 直通连接计数器集以一对 IP 地址和端口表示每个连接，其中第一个 IP 地址/端口表示该连接的本地终结点，第二个 IP 地址/端口表示该连接的远程终结点。 |
The SMB Direct Connection performance counter set consists of counters that measure connection activity. A computer can have multiple SMB Direct connections. The SMB Direct Connection counter set represents each connection as a pair of IP addresses and ports, where the first IP address/port represents the connection's local endpoint and the second IP address/port represents the connection's remote endpoint. |
| 5 | Stalls (Send Credit)/sec |
Stalls (Send Credit)/sec |
| 7 | 停止次数(发送信用)/秒是由于发送信用数不足，SMB 直通数据包传输停止的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Stalls (Send Credit)/sec is the rate at which transmission of SMB Direct packets stalled due to an insufficient number of send credits. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 9 | Stalls (Send Queue)/sec |
Stalls (Send Queue)/sec |
| 11 | 停止次数(发送队列容量)/秒是由于发送队列容量不足，RDMA 网络接口请求停止的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Stalls (Send Queue Capacity)/sec is the rate at which RDMA network interface requests stalled due to insufficient send queue capacity. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 13 | Stalls (RDMA Registrations)/sec |
Stalls (RDMA Registrations)/sec |
| 15 | 停止次数(RDMA 注册资源)/秒是由于 RDMA 注册资源不足，内存注册停止的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Stalls (RDMA Registrations Resources/sec) is the rate of memory registration stalls due to insufficient RDMA registration resources. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 17 | Sends/sec |
Sends/sec |
| 19 | 发送次数/秒是将 SMB 直通数据包发送到对等节点的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Sends/sec is the rate at which SMB Direct data packets are being sent to the peer. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 21 | Remote Invalidations/sec |
Remote Invalidations/sec |
| 23 | 远程无效次数/秒是对等节点远程使本地 RDMA 注册无效的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Remote Invalidations/sec is the rate at which local RDMA registrations are being remotely invalidated by the peer. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 25 | Memory Regions |
Memory Regions |
| 27 | 内存区域数是当前已从 RDMA 网络适配器分配给此连接的内存区域的数量。 |
Memory Regions is the number of memory regions that are currently allocated to this connection from the RDMA network adapter. |
| 33 | Bytes Received/sec |
Bytes Received/sec |
| 35 | 收到的字节数/秒是从对等节点接收数据的速率。直接通过 RDMA 读取操作从对等节点读取的数据不计在内。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Bytes Received/sec is the rate at which data is being received from the peer. Data that is directly read from the peer via RDMA read operations is not counted. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 37 | Bytes Sent/sec |
Bytes Sent/sec |
| 39 | 发送的字节数/秒是将数据发送到对等节点的速率。直接通过 RDMA 写入操作写入到对等节点的数据不计在内。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Bytes Sent/sec is the rate at which data is being sent to the peer. Data that is directly written to the peer via RDMA write operations is not counted. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 41 | Bytes RDMA Read/sec |
Bytes RDMA Read/sec |
| 43 | RDMA 读取的字节数/秒是通过 RDMA 读取操作传输字节的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Bytes RDMA Read/sec is the rate at which bytes are being transferred by RDMA read operations. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 45 | Bytes RDMA Written/sec |
Bytes RDMA Written/sec |
| 47 | RDMA 写入的字节数/秒是通过 RDMA 写入操作传输字节的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Bytes RDMA Written/sec is the rate at which bytes are being transferred by RDMA write operations. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 49 | Stalls (RDMA Read)/sec |
Stalls (RDMA Read)/sec |
| 51 | 停止次数(RDMA 读取)/秒是由于每个连接同时进行的 RDMA 读取操作数的限制， RDMA 读取停止的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Stalls (RDMA Read)/sec is the rate at which RDMA reads stalled due to a limit on the number of simultaneous RDMA read operations per connection. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 57 | Receives/sec |
Receives/sec |
| 59 | 接收次数/秒是从对等节点接收 SMB 直通数据包的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
Receives/sec is the rate at which SMB Direct data packets are being received from the peer. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 73 | RDMA Registrations/sec |
RDMA Registrations/sec |
| 75 | RDMA 注册次数/秒是内存注册为 RDMA 数据传输的源或目标的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
RDMA Registrations/sec is the rate at which memory is being registered as the source or destination for an RDMA data transfer. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 77 | SCQ Notification Events/sec |
SCQ Notification Events/sec |
| 79 | SCQ 通知事件数/秒是通知 SMB 直通发送到 SCQ 的 SQ 工作请求已完成的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
SCQ Notification Events/sec is the rate at which SMB Direct is being notified that SQ work requests have completed to the SCQ. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 81 | RCQ Notification Events/sec |
RCQ Notification Events/sec |
| 83 | RCQ 通知事件数/秒是通知 SMB 直通发送到 RCQ 的 RQ 工作请求已完成的速率。此计数器显示在最后两个采样间隔中观察到的值之间的差除以采样间隔的持续时间得到的值。 |
RCQ Notification Events/sec is the rate at which SMB Direct is being notified that RQ work requests have completed to the RCQ. This counter displays the difference between the values observed in the last two sample intervals, divided by the duration of the sample interval. |
| 0x30000000 | 信息 |
Info |
| 0x50000001 | 关键 |
Critical |
| 0x50000002 | 错误 |
Error |
| 0x50000003 | 警告 |
Warning |
| 0x50000005 | 详细 |
Verbose |
| 0x90000001 | Microsoft-Windows-SMBDirect/Admin |
Microsoft-Windows-SMBDirect/Admin |
| 0x90000002 | Microsoft-Windows-SMBDirect/Debug |
Microsoft-Windows-SMBDirect/Debug |
| 0x90000003 | Microsoft-Windows-SMBDirect/Netmon |
Microsoft-Windows-SMBDirect/Netmon |
| 0xB0010001 | 网络适配器“%1”与 SMB 直通不兼容。需要兼容的网络适配器才能支持每个接收队列工作请求至少 %2 个 SGE。该适配器支持每个接收队列工作请求最多 %3 个 SGE。 |
The network adapter '%1' is incompatible with SMB Direct. Compatible network adapters are required to support at least %2 SGE(s) per receive queue work request. This adapter supports a maximum of %3 SGE(s) per receive queue work request. |
| 0xB0010002 | 网络适配器“%1”与 SMB 直通不兼容。需要兼容的网络适配器才能支持每个发送队列工作请求至少 %2 个 SGE。该适配器支持每个发送队列工作请求最多 %3 个 SGE。 |
The network adapter '%1' is incompatible with SMB Direct. Compatible network adapters are required to support at least %2 SGE(s) per send queue work request. This adapter supports a maximum of %3 SGE(s) per send queue work request. |
| 0xB0010003 | 网络适配器“%1”与 SMB 直通不兼容。需要兼容的网络适配器才能支持每个 RDMA 读取请求至少 %2 个 SGE。该适配器支持每个 RDMA 读取请求最多 %3 个 SGE。 |
The network adapter '%1' is incompatible with SMB Direct. Compatible network adapters are required to support at least %2 SGE(s) per RDMA read request. This adapter supports a maximum of %3 SGE(s) per RDMA read request. |
| 0xB0010004 | 设置 %1\\%2 无效。请验证 %2 是否是范围 %3 到 %4 (含)中的 DWORD (32 位)值。在更正此错误之前，将对此设置使用默认值 %5。 |
Setting %1\\%2 is invalid. Verify that %2 is a DWORD (32-bit) value in the range %3 to %4 (inclusive). The default value of %5 will be used for this setting until the error is corrected. |
| 0xB0010005 | 网络适配器“%1”不支持对设置 %2\\%3 使用值 %4。将使用该适配器支持的最接近值 %5。 |
The network adapter '%1' does not support a value of %4 for setting %2\\%3. The closest adapter supported value of %5 will be used. |
| 0xB0010006 | 由于在过去 %7 毫秒内，向网络适配器“%6”发出的待处理请求均未完成，连接已终止。请验证网络是否正常运行以及对等节点是否响应。此事件也可能指示发送信用不足，无法支持工作负荷。套接字 = %1 本地 = %3 远程 = %5 |
A connection has been terminated because no pending requests to network adapter '%6' have completed in the last %7 milliseconds. Verify that the network is operational and that the peer is responsive. This event may also indicate that there are insufficient send credits to support the workload. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010007 | 设置 BaseAffinityNode 和 MaxAffinityNode (\\Registry\\Machine\\System\\CurrentControlSet\\Services\\SmbDirect\\Parameters)必须指定一组包含活动处理器的 NUMA 节点。在更正该错误前，系统的所有处理器都有资格执行 SMB 直通处理。 |
Settings BaseAffinityNode and MaxAffinityNode (\\Registry\\Machine\\System\\CurrentControlSet\\Services\\SmbDirect\\Parameters) must specify a set of NUMA nodes that contain active processors. All of the system's processors will be eligible to perform SMB Direct processing until the error is corrected. |
| 0xB001012C | 正在启动连接。套接字 = %1 本地 = %3 远程 = %5 |
Starting connect. Socket = %1 Local = %3 Remote = %5 |
| 0xB001012D | 连接成功。套接字 = %1 本地 = %3 远程 = %5 |
Connect succeeded. Socket = %1 Local = %3 Remote = %5 |
| 0xB001012E | 连接失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
Connect failed. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB001012F | 等待连接建立完成时超时 - 正在取消连接。套接字 = %1 本地 = %3 远程 = %5 |
Timed out while waiting for connection establishment to complete - cancelling connect. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010130 | NdkConnect 失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
NdkConnect failed. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB0010131 | NdkCompleteConnect 失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
NdkCompleteConnect failed. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB0010132 | 无法与对等节点协商公用 SMB 直通版本。套接字 = %1 本地 = %3 远程 = %5 MinVersion = %6 MaxVersion = %7 PeerMinVersion = %8 PeerMaxVersion = %9 |
Failed to negotiate a common SMB Direct version with the peer. Socket = %1 Local = %3 Remote = %5 MinVersion = %6 MaxVersion = %7 PeerMinVersion = %8 PeerMaxVersion = %9 |
| 0xB001015E | 收到连接请求。ListenSocket = %1 本地 = %3 远程 = %5 |
Received connect request. ListenSocket = %1 Local = %3 Remote = %5 |
| 0xB001015F | 已拒绝连接请求 - 超过连接积压限制。ListenSocket = %1 本地 = %3 远程 = %5 |
Rejected connect request - connect backlog limit exceeded. ListenSocket = %1 Local = %3 Remote = %5 |
| 0xB0010160 | 已拒绝连接请求 - 内存不足。ListenSocket = %1 本地 = %3 远程 = %5 |
Rejected connect request - not enough memory. ListenSocket = %1 Local = %3 Remote = %5 |
| 0xB0010161 | 等待接收协商请求时超时 - 正在取消接受。套接字 = %1 本地 = %3 远程 = %5 |
Timed-out while waiting to receive a negotiate request - cancelling accept. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010162 | NdkAccept 失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
NdkAccept failed. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB0010163 | 接受已启动。套接字 = %1 本地 = %3 远程 = %5 |
Accept started. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010164 | 接受成功。套接字 = %1 本地 = %3 远程 = %5 |
Accept succeeded. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010165 | 接受失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
Accept failed. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB0010166 | 上层驱动程序已拒绝连接。套接字 = %1 状态 = %2 |
Upper-level driver rejected the connection. Socket = %1 Status = %2 |
| 0xB0010190 | NDK 断开连接事件。套接字 = %1 本地 = %3 远程 = %5 |
NDK disconnect event. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010193 | 关闭已启动。套接字 = %1 本地 = %3 远程 = %5 |
Close started. Socket = %1 Local = %3 Remote = %5 |
| 0xB0010194 | 关闭已完成。套接字 = %1 |
Close completed. Socket = %1 |
| 0xB00101C2 | 发送信用不足 - 正在启动信用授予计时器。套接字 = %1 本地 = %3 远程 = %5 |
Out of send credits - starting credit grant timer. Socket = %1 Local = %3 Remote = %5 |
| 0xB00101C3 | 对等节点已使用其最后的发送信用。套接字 = %1 本地 = %3 远程 = %5 |
Peer used their last send credit. Socket = %1 Local = %3 Remote = %5 |
| 0xB00101C4 | 正在使用最后的发送信用。套接字 = %1 本地 = %3 远程 = %5 |
Using last send credit. Socket = %1 Local = %3 Remote = %5 |
| 0xB00101C5 | 在等待接收发送信用时超时。套接字 = %1 本地 = %3 远程 = %5 |
Timed-out while waiting to receive send credits. Socket = %1 Local = %3 Remote = %5 |
| 0xB00101C6 | 违反协议 - 对等节点发送了数据包，但没有了发送信用。套接字 = %1 本地 = %3 远程 = %5 |
Protocol violation - the peer sent a packet but does not have a send credit. Socket = %1 Local = %3 Remote = %5 |
| 0xB00101C7 | 违反协议 - 对等节点使用了其最后的发送信用，但没有授予发送信用。套接字 = %1 本地 = %3 远程 = %5 |
Protocol violation - the peer used their last send credit but did not grant a send credit. Socket = %1 Local = %3 Remote = %5 |
| 0xB00101C8 | 已授予对等节点 %6 个附加发送信用。套接字 %1 本地 = %3 远程 = %5 PeerSendCredits = %7 |
Granted the peer %6 additional send credits. Socket %1 Local = %3 Remote = %5 PeerSendCredits = %7 |
| 0xB00101C9 | 收到授予的 %6 个信用。套接字 = %1 本地 = %3 远程 = %5 SendCreditsAccepted = %7 SendCredits = %8 |
Received a grant of %6 credits. Socket = %1 Local = %3 Remote = %5 SendCreditsAccepted = %7 SendCredits = %8 |
| 0xB00101F4 | 无法发布 %6 SQ 工作请求。套接字 = %1 本地 = %3 远程 = %5 状态 = %7 |
Failed to post a %6 SQ work request. Socket = %1 Local = %3 Remote = %5 Status = %7 |
| 0xB00101F5 | %6 SQ 工作请求失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %7 |
%6 SQ work request failed. Socket = %1 Local = %3 Remote = %5 Status = %7 |
| 0xB00101F6 | 无法发布 Receive 工作请求。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
Failed to post a Receive work request. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB00101F7 | Receive 工作请求失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
Receive work request failed. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB00103E8 | 在等待接收“保持连接”响应时超时。套接字 = %1 本地 = %3 远程 = %5 |
Timed-out out while waiting to receive a keepalive response. Socket = %1 Local = %3 Remote = %5 |
| 0xB00103E9 | 违反协议 - 收到的数据包太小或至少包含一个无效值。套接字 = %1 本地 = %3 远程 = %5 |
Protocol violation - received packet is too small or contains at least one invalid value. Socket = %1 Local = %3 Remote = %5 |
| 0xB00103EA | 违反协议 - 总的分段有效负载大于第一个分段所指示的值。套接字 = %1 本地 = %3 远程 = %5 |
Protocol violation - total fragmented payload is larger than indicated by first fragment. Socket = %1 Local = %3 Remote = %5 |
| 0xB00103EB | 违反协议 - 总的分段有效负载小于第一个分段所指示的值。套接字 = %1 本地 = %3 远程 = %5 |
Protocol violation - total fragmented payload is smaller than indicated by first fragment. Socket = %1 Local = %3 Remote = %5 |
| 0xB00103EC | 无法分配分段重组缓冲区。套接字 = %1 本地 = %3 远程 = %5 |
Failed to allocate a fragment reassembly buffer. Socket = %1 Local = %3 Remote = %5 |
| 0xB00103ED | %6 操作失败。套接字 = %1 本地 = %3 远程 = %5 状态 = %7 |
%6 operation failed. Socket = %1 Local = %3 Remote = %5 Status = %7 |
| 0xB00103EE | 已创建套接字。套接字 = %1 |
Created socket. Socket = %1 |
| 0xB00103EF | 无法创建套接字。套接字 = %1 状态 = %2 |
Failed to create socket. Socket = %1 Status = %2 |
| 0xB00103F0 | 已协商完连接属性。套接字 = %1 本地 = %3 远程 = %5 ProtocolVersion = %6 MaxReadWriteSize = %7 MaxReceiveSize = %8 MaxFragmentedReceiveSize = %9 MaxSendSize = %10 MaxFragmentedSendSize = %11 IRD = %12 ORD = %13 |
Finished negotiating connection properties. Socket = %1 Local = %3 Remote = %5 ProtocolVersion = %6 MaxReadWriteSize = %7 MaxReceiveSize = %8 MaxFragmentedReceiveSize = %9 MaxSendSize = %10 MaxFragmentedSendSize = %11 IRD = %12 ORD = %13 |
| 0xB00103F1 | 完成队列已失败，不再指示完成。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
A completion queue has failed and is no longer indicating completions. Socket = %1 Local = %3 Remote = %5 Status = %6 |
| 0xB00103F2 | 已更新 SCQ 中断调节参数。套接字 = %1 计数 = %2 IntervalInMicroSeconds = %3 |
Updated SCQ interrupt moderation parameters. Socket = %1 Count = %2 IntervalInMicroSeconds = %3 |
| 0xB00103F3 | 已更新 RCQ 中断调节参数。套接字 = %1 计数 = %2 IntervalInMicroSeconds = %3 |
Updated RCQ interrupt moderation parameters. Socket = %1 Count = %2 IntervalInMicroSeconds = %3 |
| 0xB001251C | 已打开网络适配器“%1”。NdkMajorVer = %2 NdkMinorVer = %3 VendorId = %4 DeviceId = %5 MaxRegistrationSize = %6 MaxWindowSize = %7 FrmrPageCount = %8 MaxInitiatorRequestSge = %9 MaxReceiveRequestSge = %10 MaxReadRequestSge = %11 MaxTransferLength = %12 MaxInlineDataSize = %13 MaxInboundReadLimit = %14 MaxOutboundReadLimit = %15 MaxReceiveQueueDepth = %16 MaxInitiatorQueueDepth = %17 MaxSrqDepth = %18 MaxCqDepth = %19 LargeRequestThreshold = %20 MaxCallerData = %21 MaxCalleeData = %22 AdapterFlags = %23 |
Opened network adapter '%1'. NdkMajorVer = %2 NdkMinorVer = %3 VendorId = %4 DeviceId = %5 MaxRegistrationSize = %6 MaxWindowSize = %7 FrmrPageCount = %8 MaxInitiatorRequestSge = %9 MaxReceiveRequestSge = %10 MaxReadRequestSge = %11 MaxTransferLength = %12 MaxInlineDataSize = %13 MaxInboundReadLimit = %14 MaxOutboundReadLimit = %15 MaxReceiveQueueDepth = %16 MaxInitiatorQueueDepth = %17 MaxSrqDepth = %18 MaxCqDepth = %19 LargeRequestThreshold = %20 MaxCallerData = %21 MaxCalleeData = %22 AdapterFlags = %23 |
| 0xB0012710 | 收到协商请求。套接字 = %1 本地 = %3 远程 = %5 MinVersion = %6 MaxVersion = %7 已保留 = %8 CreditsRequested = %9 PreferredSendSize = %10 MaxReceiveSize = %11 MaxFragmentReassemblyBufferSize = %12 |
Received negotiate request. Socket = %1 Local = %3 Remote = %5 MinVersion = %6 MaxVersion = %7 Reserved = %8 CreditsRequested = %9 PreferredSendSize = %10 MaxReceiveSize = %11 MaxFragmentReassemblyBufferSize = %12 |
| 0xB0012711 | 正在发送协商请求。套接字 = %1 本地 = %3 远程 = %5 MinVersion = %6 MaxVersion = %7 已保留 = %8 CreditsRequested = %9 PreferredSendSize = %10 MaxReceiveSize = %11 MaxFragmentReassemblyBufferSize = %12 |
Sending negotiate request. Socket = %1 Local = %3 Remote = %5 MinVersion = %6 MaxVersion = %7 Reserved = %8 CreditsRequested = %9 PreferredSendSize = %10 MaxReceiveSize = %11 MaxFragmentReassemblyBufferSize = %12 |
| 0xB0012712 | 收到协商响应。套接字 = %1 本地 = %3 远程 = %5 MinVersion = %6 MaxVersion = %7 NegotiatedVersion = %8 已保留 = %9 CreditsRequested = %10 CreditsGranted = %11 状态 = %12 MaxReadWriteSize = %13 PreferredSendSize = %14 MaxReceiveSize = %15 MaxFragmentReassemblyBufferSize = %16 |
Received negotiate response. Socket = %1 Local = %3 Remote = %5 MinVersion = %6 MaxVersion = %7 NegotiatedVersion = %8 Reserved = %9 CreditsRequested = %10 CreditsGranted = %11 Status = %12 MaxReadWriteSize = %13 PreferredSendSize = %14 MaxReceiveSize = %15 MaxFragmentReassemblyBufferSize = %16 |
| 0xB0012713 | 正在发送协商响应。套接字 = %1 本地 = %3 远程 = %5 MinVersion = %6 MaxVersion = %7 NegotiatedVersion = %8 已保留 = %9 CreditsRequested = %10 CreditsGranted = %11 状态 = %12 MaxReadWriteSize = %13 PreferredSendSize = %14 MaxReceiveSize = %15 MaxFragmentReassemblyBufferSize = %16 |
Sending negotiate response. Socket = %1 Local = %3 Remote = %5 MinVersion = %6 MaxVersion = %7 NegotiatedVersion = %8 Reserved = %9 CreditsRequested = %10 CreditsGranted = %11 Status = %12 MaxReadWriteSize = %13 PreferredSendSize = %14 MaxReceiveSize = %15 MaxFragmentReassemblyBufferSize = %16 |
| 0xB0012714 | 收到数据。套接字 = %1 本地 = %3 远程 = %5 CreditsRequested = %6 CreditsGranted = %7 标志 = %8 已保留 = %9 RemainingDataLength = %10 DataOffset = %11 DataLength = %12 |
Received data. Socket = %1 Local = %3 Remote = %5 CreditsRequested = %6 CreditsGranted = %7 Flags = %8 Reserved = %9 RemainingDataLength = %10 DataOffset = %11 DataLength = %12 |
| 0xB0012715 | 正在发送数据。套接字 = %1 本地 = %3 远程 = %5 CreditsRequested = %6 CreditsGranted = %7 标志 = %8 已保留 = %9 RemainingDataLength = %10 DataOffset = %11 DataLength = %12 |
Sending data. Socket = %1 Local = %3 Remote = %5 CreditsRequested = %6 CreditsGranted = %7 Flags = %8 Reserved = %9 RemainingDataLength = %10 DataOffset = %11 DataLength = %12 |
| 0xB0020191 | 断开连接已启动。套接字 = %1 本地 = %3 远程 = %5 状态 = %6 |
Disconnect started. Socket = %1 Local = %3 Remote = %5 State = %6 |
| 0xB0020192 | 断开连接已完成。套接字 = %1 本地 = %3 远程 = %5 |
Disconnect completed. Socket = %1 Local = %3 Remote = %5 |
| 0xD0000001 | 正在初始化 |
Initializing |
| 0xD0000002 | 已初始化 |
Initialized |
| 0xD0000003 | 正在连接 |
Connecting |
| 0xD0000004 | 已连接 |
Connected |
| 0xD0000005 | 正在断开连接 |
Disconnecting |
| 0xD0000006 | 已断开连接 |
Disconnected |
| 0xD0000007 | 发送 |
Send |
| 0xD0000008 | 注册 |
Register |
| 0xD0000009 | 失效 |
Invalidate |
| 0xD000000A | 读取 |
Read |
| 0xD000000B | 写入 |
Write |