901 | 分析失败 |
Analysis Failure |
902 | 分析失败。这可能是由于已损坏跟踪文件或已丢弃事件造成的。 |
Analysis was unsuccessful. This can be caused by a corrupted trace file or dropped events. |
903 | 分析错误 |
Analysis Error |
904 | 部分分析失败。可以获得某些结果,但这些结果可能不完整。 |
Analysis was partially unsuccessful. Some results are available, but they may be incomplete. |
905 | 分析成功 |
Analysis Success |
906 | 分析成功。未找到能效问题。未返回任何信息。 |
Analysis was successful. No energy efficiency problems were found. No information was returned. |
1001 | 系统信息 |
System Information |
1003 | 系统信息详情 |
System Information Details |
1004 | 计算机名 |
Computer Name |
1005 | 系统制造商 |
System Manufacturer |
1006 | 系统产品名称 |
System Product Name |
1007 | BIOS 日期 |
BIOS Date |
1008 | BIOS 版本 |
BIOS Version |
1009 | OS 内部版本号 |
OS Build Number |
1010 | 平台角色 |
Platform Role |
1016 | 进程计数 |
Process Count |
1017 | 线程计数 |
Thread Count |
1018 | 接通电源 |
Plugged In |
1101 | 平台计时器分辨率 |
Platform Timer Resolution |
1103 | 默认的平台计时器分辨率是 15.6ms (15625000ns),应在系统空闲时使用。如果提高计时器的分辨率,则处理器电源管理技术可能无效。可能由于需要播放多媒体或制作图形动画而提高计时器的分辨率。 |
The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. |
1104 | 当前计时器分辨率(100ns 个单位) |
Current Timer Resolution (100ns units) |
1105 | 最大计时器周期(100ns 个单位) |
Maximum Timer Period (100ns units) |
1106 | 未完成的计时器请求 |
Outstanding Timer Request |
1107 | 程序或服务请求的计时器分辨率小于平台最大计时器分辨率。 |
A program or service has requested a timer resolution smaller than the platform maximum timer resolution. |
1108 | 已请求周期 |
Requested Period |
1109 | 正在请求进程 ID |
Requesting Process ID |
1110 | 正在请求进程路径 |
Requesting Process Path |
1111 | 未完成的核心计时器请求 |
Outstanding Kernel Timer Request |
1112 | 核心组件或设备驱动程序请求的计时器分辨率小于平台最大计时器分辨率。 |
A kernel component or device driver has requested a timer resolution smaller than the platform maximum timer resolution. |
1114 | 请求计数 |
Request Count |
1115 | 程序或服务请求的计时器分辨率大于或等于平台最大计时器分辨率。 |
A program or service has requested a timer resolution equal to or greater than the platform maximum timer resolution. |
1116 | 计时器请求堆栈 |
Timer Request Stack |
1117 | 模块堆栈负责该进程中的最低平台计时器设置。 |
The stack of modules responsible for the lowest platform timer setting in this process. |
1118 | 调用模块 |
Calling Module |
1201 | 电源策略 |
Power Policy |
1202 | 活动电源计划 |
Active Power Plan |
1203 | 当前使用的电源计划 |
The current power plan in use |
1204 | 计划 GUID |
Plan GUID |
1205 | 电源计划个人设置(使用电池) |
Power Plan Personality (On Battery) |
1206 | 系统使用电池供电时当前电源计划的个人设置。 |
The personality of the current power plan when the system is on battery power. |
1207 | 个人设置 |
Personality |
1208 | 电源计划个人设置为高性能(使用电池) |
Power Plan Personality is High Performance (On Battery) |
1209 | 当系统使用电池供电时,当前电源计划个人设置为高性能。 |
The current power plan personality is High Performance when the system is on battery power. |
1210 | 显示器超时已禁用(使用电池) |
Display timeout disabled (On Battery) |
1211 | 未将显示器配置为一段时间不活动后关闭。 |
The display is not configured to turn off after a period of inactivity. |
1212 | 显示器超时较长(使用电池) |
Display timeout is long (On Battery) |
1213 | 显示器配置为超过 5 分钟后关闭。 |
The display is configured to turn off after longer than 5 minutes. |
1214 | 超时(秒) |
Timeout (seconds) |
1215 | 变暗超时已禁用(使用电池) |
Dim timeout is disabled (On Battery) |
1216 | 未将显示器配置为在一段时间不活动后自动变暗。 |
The display is not configured to automatically dim after a period of inactivity. |
1217 | 变暗超时较长(使用电池) |
Dim timeout is long (On Battery) |
1218 | 显示器配置为在 5 分钟后自动变暗。 |
The display is configured to automatically dim after longer than 5 minutes. |
1220 | 磁盘空闲已禁用(使用电池) |
Disk idle is disabled (On Battery) |
1221 | 未将磁盘配置为磁盘一段时间不活动后关闭。 |
The disk is not configured to turn off after a period of disk inactivity. |
1222 | 磁盘超时较长(使用电池) |
Disk timeout is long (On Battery) |
1223 | 磁盘配置为在 30 分钟后关闭。 |
The disk is configured to turn off after longer than 30 minutes. |
1225 | 睡眠超时已禁用(使用电池) |
Sleep timeout is disabled (On Battery) |
1226 | 未将计算机配置为一段时间不活动后自动睡眠。 |
The computer is not configured to automatically sleep after a period of inactivity. |
1227 | 睡眠超时较长(使用电池) |
Sleep timeout is long (On Battery) |
1228 | 计算机配置为在 30 分钟后自动睡眠。 |
The computer is configured to automatically sleep after longer than 30 minutes. |
1230 | 处理器的最小性能状态为 100% (使用电池) |
Minimum processor performance state is 100% (On Battery) |
1231 | 未将处理器配置为根据活动情况自动降低电源消耗。 |
The processor is not configured to automatically reduce power consumption based on activity. |
1232 | 处理器的最小性能状态为高(使用电池) |
Minimum processor performance state is high (On Battery) |
1233 | 处理器的最低性能状态大于处理器最大性能的 75%。 |
The lowest processor performance state is greater than 75% of the maximum processor performance. |
1234 | 最小性能状态(最大性能的 %) |
Minimum performance state (% of maximum performance) |
1237 | 处理器空闲状态已禁用(使用电池) |
Processor idle states are disabled (On Battery) |
1238 | 当前处理器电源管理策略已禁用低功耗处理器空闲状态。 |
The current processor power management policy has disabled low-power processor idle states. |
1239 | USB 选择性暂停已禁用(使用电池) |
USB Selective Suspend is disabled (On Battery) |
1240 | 当前电源策略已全局禁用 USB 选择性暂停。 |
The current power policy has globally disabled USB selective suspend. |
1241 | 802.11 无线电电源策略为最大性能(使用电池) |
802.11 Radio Power Policy is Maximum Performance (On Battery) |
1242 | 未将符合 802.11 的无线网络适配器的当前电源策略配置为使用低功耗模式。 |
The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes. |
1243 | PCI Express ASPM 已禁用(使用电池) |
PCI Express ASPM is disabled (On Battery) |
1244 | PCI Express 活动状态电源管理(ASPM)的当前电源策略配置为关闭。 |
The current power policy for PCI Express Active State Power Management (ASPM) is configured to Off. |
1250 | 电源计划个人设置(接通电源) |
Power Plan Personality (Plugged In) |
1251 | 系统接通电源时当前电源计划的个人设置。 |
The personality of the current power plan when the system is plugged in. |
1252 | 电源计划个人设置为高性能(接通电源) |
Power Plan Personality is High Performance (Plugged In) |
1253 | 系统接通电源时当前电源计划的个人设置为高性能。 |
The current power plan personality is High Performance when the system is plugged in. |
1254 | 显示器超时已禁用(接通电源) |
Display timeout disabled (Plugged In) |
1256 | 显示器超时较长(接通电源) |
Display timeout is long (Plugged In) |
1257 | 将显示器配置为在 10 分钟后关闭。 |
The display is configured to turn off after longer than 10 minutes. |
1258 | 变暗超时已禁用(接通电源) |
Dim timeout is disabled (Plugged In) |
1260 | 变暗超时较长(接通电源) |
Dim timeout is long (Plugged In) |
1261 | 显示器配置为在 10 分钟后自动变暗。 |
The display is configured to automatically dim after longer than 10 minutes. |
1262 | 磁盘空闲已禁用(接通电源) |
Disk idle is disabled (Plugged In) |
1264 | 磁盘超时较长(接通电源) |
Disk timeout is long (Plugged In) |
1266 | 睡眠超时已禁用(接通电源) |
Sleep timeout is disabled (Plugged In) |
1268 | 睡眠超时较长(接通电源) |
Sleep timeout is long (Plugged In) |
1270 | 处理器的最小性能状态为 100% (接通电源) |
Minimum processor performance state is 100% (Plugged In) |
1272 | 处理器的最小性能状态为高(接通电源) |
Minimum processor performance state is high (Plugged In) |
1276 | 处理器空闲状态已禁用(接通电源) |
Processor idle states are disabled (Plugged In) |
1278 | USB 选择性暂停已禁用(接通电源) |
USB Selective Suspend is disabled (Plugged In) |
1280 | 802.11 无线电电源策略为最大性能(接通电源) |
802.11 Radio Power Policy is Maximum Performance (Plugged In) |
1282 | PCI Express ASPM 已禁用(接通电源) |
PCI Express ASPM is disabled (Plugged In) |
1288 | 视频质量(用电池) |
Video Quality (On Battery) |
1289 | 在播放视频时,启用 Windows Media Player 可以提高画质或节能。 |
Enables Windows Media Player to optimize for quality or power savings when playing video. |
1290 | 质量模式 |
Quality Mode |
1291 | 视频质量(已插入) |
Video quality (Plugged In) |
1301 | 系统可用性请求 |
System Availability Requests |
1302 | 系统需要的请求 |
System Required Request |
1303 | 程序已请求阻止系统自动进入睡眠状态。 |
The program has made a request to prevent the system from automatically entering sleep. |
1304 | 正在请求进程 |
Requesting Process |
1306 | 服务已请求阻止系统自动进入睡眠状态。 |
The service has made a request to prevent the system from automatically entering sleep. |
1307 | 正在请求服务 |
Requesting Service |
1309 | 设备或驱动程序已请求阻止系统自动进入睡眠状态。 |
The device or driver has made a request to prevent the system from automatically entering sleep. |
1310 | 正在请求驱动程序实例 |
Requesting Driver Instance |
1311 | 正在请求驱动程序设备 |
Requesting Driver Device |
1313 | 内核组件已请求阻止系统自动进入睡眠状态。 |
A kernel component has made a request to prevent the system from automatically entering sleep. |
1314 | 显示器需要的请求 |
Display Required Request |
1315 | 程序已请求阻止显示器自动进入低功耗模式。 |
The program has made a request to prevent the display from automatically entering a low-power mode. |
1316 | 离开模式请求 |
Away Mode Request |
1317 | 程序已请求启用离开模式。 |
The program has made a request to enable Away Mode. |
1319 | 服务已请求启用离开模式。 |
The service has made a request to enable Away Mode. |
1320 | 需要执行的请求 |
Execution Required Request |
1321 | 该程序已发出需要执行的请求。 |
The program has made a request for execution-required. |
1323 | 该服务已发出需要执行的请求。 |
The service has made a request for execution-required. |
1401 | USB 暂停 |
USB Suspend |
1402 | USB 设备未进入选择性暂停状态 |
USB Device not Entering Selective Suspend |
1403 | 该设备未进入 USB 选择性暂停状态。如果 USB 设备未处于选择性暂停状态,则可能会阻止处理器电源管理的运行。注: 此问题不会阻止系统进入休眠状态。 |
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping. |
1404 | 主控制器 ID |
Host Controller ID |
1405 | 主控制器位置 |
Host Controller Location |
1406 | 设备 ID |
Device ID |
1407 | 端口路径 |
Port Path |
1409 | USB 设备很少进入选择性暂停状态 |
USB Device Rarely Entering Selective Suspend |
1410 | 该设备在跟踪过程中间歇性进入 USB 选择性暂停状态。如果 USB 设备未处于选择性暂停状态,则可能会阻止处理器电源管理的运行。注: 此问题不会阻止系统进入休眠状态。 |
This device intermittently entered the USB Selective Suspend state during the trace. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping. |
1411 | 暂停时间(%) |
Time Suspended (%) |
1412 | 原因 |
Reason |
1413 | 此蓝牙 USB 设备不支持选择性暂停,因为此设备不是自己供电。 |
This Bluetooth USB device does not support selective suspend because it is not self powered. |
1414 | 此蓝牙 USB 设备不支持选择性暂停,因为此设备不支持远程唤醒。 |
This Bluetooth USB device does not support selective suspend because it is not remote wake capable. |
1501 | CPU 使用率 |
CPU Utilization |
1502 | 处理器利用率低 |
Processor utilization is low |
1503 | 在跟踪过程中,处理器的平均利用率很低。当处理器的平均利用率很低时,系统将消耗较少的电源。 |
The average processor utilization during the trace was very low. The system will consume less power when the average processor utilization is very low. |
1504 | 平均利用率(%) |
Average Utilization (%) |
1505 | 处理器利用率为中等 |
Processor utilization is moderate |
1506 | 跟踪期间处理器的平均利用率为中等。当处理器的平均利用率很低时,系统将消耗较少的电源。请查看单个处理器的处理器利用率,以确定哪些应用程序和服务占据了大部分处理器利用率。 |
The average processor utilization during the trace was moderate. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. |
1507 | 处理器利用率高 |
Processor utilization is high |
1508 | 跟踪期间处理器的平均利用率高。当处理器的平均利用率很低时,系统将消耗较少的电源。请查看单个处理器的处理器利用率,以确定哪些应用程序和服务占据了大部分处理器利用率。 |
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. |
1509 | 处理器利用率较高的单个处理器。 |
Individual process with significant processor utilization. |
1510 | 此进程负责跟踪期间记录的较大部分的总处理器利用率。 |
This process is responsible for a significant portion of the total processor utilization recorded during the trace. |
1511 | 进程名 |
Process Name |
1512 | PID |
PID |
1514 | 模块 |
Module |
1515 | 平均模块利用率(%) |
Average Module Utilization (%) |
1601 | 电池 |
Battery |
1602 | 电池信息 |
Battery Information |
1604 | 电池 ID |
Battery ID |
1605 | 制造商 |
Manufacturer |
1606 | 制造日期 |
Manufacture Date |
1607 | 序列号 |
Serial Number |
1608 | 化学成分 |
Chemistry |
1609 | 长期 |
Long Term |
1610 | 循环计数 |
Cycle Count |
1611 | 设计容量 |
Design Capacity |
1612 | 上次完全充电 |
Last Full Charge |
1613 | 上次完全充电(%) |
Last Full Charge (%) |
1614 | 上次电池完全充电后,它存储的电量少于设计容量的 50%。 |
The battery stored less than 50% of the Designed Capacity the last time the battery was fully charged. |
1617 | 上次电池完全充电后,它存储的电量少于设计容量的 40%。 |
The battery stored less than 40% of the Designed Capacity the last time the battery was fully charged. |
1618 | 电池容量未知 |
Battery Capacity Unknown |
1619 | 无法确定电池容量。这可能表示固件(BIOS)出现问题。 |
The battery capacity could not be determined. This may indicate a firmware (BIOS) problem. |
1620 | 已密封 |
Sealed |
1701 | 平台电源管理功能 |
Platform Power Management Capabilities |
1702 | 支持的睡眠状态 |
Supported Sleep States |
1703 | 睡眠状态允许计算机在一段时间不活动后进入低功耗模式。S3 睡眠状态是 Windows 平台的默认睡眠状态。S3 睡眠状态仅消耗足够保留内存中内容的电源且允许计算机快速恢复工作。很少有平台支持 S1 或 S2 睡眠状态。 |
Sleep states allow the computer to enter low-power modes after a period of inactivity. The S3 sleep state is the default sleep state for Windows platforms. The S3 sleep state consumes only enough power to preserve memory contents and allow the computer to resume working quickly. Very few platforms support the S1 or S2 Sleep states. |
1704 | S1 睡眠受支持 |
S1 Sleep Supported |
1705 | S2 睡眠受支持 |
S2 Sleep Supported |
1706 | S3 睡眠受支持 |
S3 Sleep Supported |
1707 | S4 睡眠受支持 |
S4 Sleep Supported |
1710 | 由于存在与此计算机硬件的已知不兼容问题,因此禁用了 S1 睡眠状态。 |
The S1 sleep state has been disabled because of a known incompatibility with the hardware in this computer. |
1711 | Windows 在某些具有与睡眠不兼容的硬件的计算机上自动禁用睡眠。安装最新固件(BIOS)可能会解决此问题。 |
Windows automatically disables sleep on some computers with hardware which is not compatible with sleep. Installing the latest firmware (BIOS) may resolve this issue. |
1712 | 由于存在与此计算机硬件的已知不兼容问题,因此禁用了 S2 睡眠状态。 |
The S2 sleep state has been disabled because of a known incompatibility with the hardware in this computer. |
1714 | 由于存在与此计算机硬件的已知不兼容问题,因此禁用了 S3 睡眠状态。 |
The S3 sleep state has been disabled because of a known incompatibility with the hardware in this computer. |
1720 | 系统固件(BIOS)不支持 S3。 |
System firmware (BIOS) does not support S3. |
1721 | 此计算机中的硬件不支持 S3 睡眠状态。 |
The hardware in this computer does not support the S3 sleep state. |
1722 | 系统固件(BIOS)不支持 S4 (休眠)。 |
System firmware (BIOS) does not support S4 (Hibernate). |
1723 | 此计算机中的硬件不支持 S4 (休眠)状态。 |
The hardware in this computer does not support the S4 (Hibernate) state. |
1726 | 已在电源策略中禁用睡眠。 |
Sleep is disabled in power policy. |
1727 | 系统管理员已在此系统上禁用睡眠。 |
The system administrator has disabled sleep on this system. |
1728 | 由于系统具有太多的物理内存,因此已禁用休眠。 |
Hibernate has been disabled because the system has too much physical memory. |
1730 | 由于存储子系统存在未知问题,因此已禁用休眠。 |
Hibernate has been disabled because of an unknown problem with the storage subsystem. |
1732 | 由于无法生成或访问休眠文件,因此已禁用休眠。 |
Hibernate has been disabled because the Hibernation file could not be generated or accessed. |
1734 | 由于安装了旧版驱动程序,因此已禁用睡眠。 |
Sleep is disabled because a legacy driver is installed. |
1735 | 睡眠要求所有设备驱动程序与即插即用和电源管理相兼容。如果安装了旧版驱动程序,则会自动禁用睡眠。 |
Sleep requires all device drivers to be compatible with Plug-and-Play and Power Management. If a legacy driver is installed, sleep is automatically disabled. |
1736 | 驱动程序名称 |
Driver Name |
1737 | 某个系统组件已临时禁用 S1 睡眠状态。 |
The S1 sleep state has been temporarily disabled by a system component. |
1738 | 安装以下组件或者正在执行任务时,计算机可能不过渡到睡眠状态。 |
The computer may not transition to sleep when the following components are installed or tasks are ongoing. |
1739 | Microsoft 基本显示驱动程序或 Microsoft 基本渲染驱动程序 |
Microsoft Basic Display Driver or Microsoft Basic Render Driver |
1740 | 虚拟机监控程序 |
Hypervisor |
1741 | 从虚拟硬盘文件(VHD)启动系统。 |
The system is booted from a virtual hard disk file (VHD). |
1742 | 某个系统组件已临时禁用 S2 睡眠状态。 |
The S2 sleep state has been temporarily disabled by a system component. |
1744 | 某个系统组件已临时禁用 S3 睡眠状态。 |
The S3 sleep state has been temporarily disabled by a system component. |
1746 | 某个系统组件已临时禁用 S4 (休眠)状态。 |
The S4 (Hibernate) state has been temporarily disabled by a system component. |
1748 | 支持自适应显示器亮度。 |
Adaptive Display Brightness is supported. |
1749 | 此计算机允许 Windows 自动控制集成显示器的亮度。 |
This computer enables Windows to automatically control the brightness of the integrated display. |
1750 | 自适应显示器亮度支持 |
Adaptive Display Brightness Support |
1751 | 此计算机不允许 Windows 自动控制集成显示器的亮度。安装最新的系统固件(BIOS)可能会解决此问题。 |
This computer does not allow Windows to automatically control the brightness of the integrated display. Installing the latest system firmware (BIOS) may resolve this issue. |
1752 | 处理器电源管理功能 |
Processor Power Management Capabilities |
1753 | 有效的处理器电源管理允许计算机自动平衡性能和能量消耗。 |
Effective processor power management enables the computer to automatically balance performance and energy consumption. |
1754 | 组 |
Group |
1755 | 索引 |
Index |
1756 | 空闲(C)状态计数 |
Idle (C) State Count |
1757 | 性能(P)状态计数 |
Performance (P) State Count |
1758 | 节流(T)状态计数 |
Throttle (T) State Count |
1759 | ACPI C2 状态失败验证 |
ACPI C2 State Failed Validation |
1760 | 此计算机上的 C2 空闲状态的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the C2 idle state on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1761 | ACPI C3 失败验证 |
ACPI C3 Failed Validation |
1762 | 此计算机上的 C3 空闲状态的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the C3 idle state on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1763 | ACPI 节流状态失败验证 |
ACPI Throttle States Failed Validation |
1764 | 此计算机上的节流状态的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of throttle states on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1765 | ACPI _CST 对象失败验证 |
ACPI _CST Object Failed Validation |
1766 | 此计算机上的 ACPI _CST 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _CST object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1767 | ACPI _CSD 对象失败验证 |
ACPI _CSD Object Failed Validation |
1768 | 此计算机上的 ACPI _CSD 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _CSD object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1769 | ACPI _PCT 对象失败验证 |
ACPI _PCT Object Failed Validation |
1770 | 此计算机上的 ACPI _PCT 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _PCT object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1771 | ACPI _PSS 对象失败验证 |
ACPI _PSS Object Failed Validation |
1772 | 此计算机上的 ACPI _PSS 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _PSS object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1773 | ACPI XPSS 对象失败验证 |
ACPI XPSS Object Failed Validation |
1774 | 此计算机上的 ACPI XPSS 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI XPSS object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1775 | ACPI _PPC 对象失败验证 |
ACPI _PPC Object Failed Validation |
1776 | 此计算机上的 ACPI _PPC 对象的定义存在问题。安装最新系统固件(BIOS]可能解决此问题。 |
There is a problem with the definition of the ACPI _PPC object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1777 | ACPI _PSD 对象失败验证 |
ACPI _PSD Object Failed Validation |
1778 | 此计算机上的 ACPI _PSD 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _PSD object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1779 | ACPI _PTC 对象失败验证 |
ACPI _PTC Object Failed Validation |
1780 | 此计算机上的 ACPI _PTC 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _PTC object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1781 | ACPI _TSS 对象失败验证 |
ACPI _TSS Object Failed Validation |
1782 | 此计算机上的 ACPI _TSS 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _TSS object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1783 | ACPI _TPC 对象失败验证 |
ACPI _TPC Object Failed Validation |
1784 | 此计算机上的 ACPI _TPC 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _TPC object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1785 | ACPI _TSD 对象失败验证 |
ACPI _TSD Object Failed Validation |
1786 | 此计算机上的 ACPI _TSD 对象的定义存在问题。安装最新系统固件(BIOS]可能解决此问题。 |
There is a problem with the definition of the ACPI _TSD object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1787 | 处理器空闲状态域成员计数不正确 |
Processor Idle State Domain Member Count Incorrect |
1788 | 定义为处理器空闲域的成员的处理器数存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the number of processors defined as members of a processor idle domain. Installing the latest system firmware (BIOS) may resolve this issue. |
1789 | 域 ID |
Domain ID |
1790 | 预期成员计数 |
Expected Member Count |
1791 | 实际成员计数 |
Actual Member Count |
1792 | 处理器性能或节流状态域成员计数不正确 |
Processor Performance or Throttle State Domain Member Count Incorrect |
1793 | 定义为处理器性能或节流状态域的成员的处理器数存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the number of processors defined as members of a processor performance or throttle state domain. Installing the latest system firmware (BIOS) may resolve this issue. |
1794 | 处理器空闲状态已禁用 |
Processor Idle States Disabled |
1795 | 由于存在与此计算机硬件的已知不兼容问题,已自动禁用处理器空闲状态。安装最新系统固件(BIOS)可能解决此问题。 |
Processor idle states have been automatically disabled due to a known incompatibility with the hardware in this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1796 | 处理器性能状态已禁用 |
Processor Performance States Disabled |
1797 | 由于存在与此计算机硬件的已知不兼容问题,已自动禁用处理器性能状态。安装最新系统固件(BIOS]可能解决此问题。 |
Processor performance states have been automatically disabled due to a known incompatibility with the hardware in this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1798 | 处理器节流状态已禁用 |
Processor Throttle States Disabled |
1799 | 由于此计算机的硬件存在已知的不兼容问题,因此处理器节流状态已自动禁用。安装最新的系统固件(BIOS)可能解决此问题。 |
Processor throttle states have been automatically disabled due to a known incompatibility with the hardware in this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1800 | PCI Express 活动状态电源管理(ASPM)已禁用 |
PCI Express Active-State Power Management (ASPM) Disabled |
1801 | 由于与此计算机上的硬件产生了已知的不兼容问题,因此已禁用 PCI Express 活动状态电源管理(ASPM)。 |
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer. |
1802 | 无线访问点不支持 WMM 节能 |
Wireless access point does not support WMM Power Save |
1803 | 计算机连接到的无线接入点不支持 WMM 节能模式。无线网络适配器无法进入节能模式来按照无线适配器电源策略中定义的方式节能。 |
The wireless access point the computer is connected to does not support WMM Power Save Mode. The wireless network adapter cannot enter Power Save mode to save energy as defined in Wireless Adapter Power Policy. |
1804 | SSID |
SSID |
1805 | MAC 地址 |
MAC Address |
1806 | 连接待机支持 |
Connected Standby Support |
1807 | 连接待机可以使计算机进入低功率模式,在该模式下,计算机始终开启和连接。如果受支持,则使用连接待机,而不是系统睡眠状态。 |
Connected standby allows the computer to enter a low-power mode in which it is always on and connected. If supported, connected standby is used instead of system sleep states. |
1808 | 连接待机受支持 |
Connected Standby Supported |
1809 | ACPI PCCP 对象失败验证 |
ACPI PCCP Object Failed Validation |
1810 | 此计算机上的 ACPI PCCP 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI PCCP object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1811 | ACPI _CPC 对象失败验证 |
ACPI _CPC Object Failed Validation |
1812 | 此计算机上的 ACPI _CPC 对象的定义存在问题。安装最新系统固件(BIOS)可能解决此问题。 |
There is a problem with the definition of the ACPI _CPC object on this computer. Installing the latest system firmware (BIOS) may resolve this issue. |
1813 | 空闲状态计数 |
Idle State Count |
1814 | 空闲状态类型 |
Idle State Type |
1815 | 标称频率(MHz) |
Nominal Frequency (MHz) |
1816 | 最大性能百分比 |
Maximum Performance Percentage |
1817 | 最低性能百分比 |
Lowest Performance Percentage |
1818 | 最低限制百分比 |
Lowest Throttle Percentage |
1819 | 性能控制类型 |
Performance Controls Type |
1820 | 无 |
None |
1821 | ACPI 性能(P)状态/限制(T)状态 |
ACPI Performance (P) / Throttle (T) States |
1822 | 平台时钟控制 |
Platform Clocking Control |
1823 | ACPI 协作处理器性能控制 |
ACPI Collaborative Processor Performance Control |
1824 | 电源引擎插件 |
Power Engine Plugin |
1825 | ACPI 空闲(C)状态 |
ACPI Idle (C) States |
1826 | Windows To Go |
Windows To Go |
1827 | 由于硬件不兼容,已禁用“连接待机”。 |
Connected Standby has been disabled due to non-compliant hardware. |
1828 | 这台计算机已支持“连接待机”,但是一个或多个硬件组件不符合此状态的要求。不符合这些要求的组件如下: |
This computer has indicated support for Connected Standby however one or more hardware components fails to comply with the requirements for this state. The following component(s) do not fulfill these requirements: |
1829 | 存储硬件 |
Storage Hardware |
1830 | 无线网络适配器 |
Wireless Network Adapter |
1831 | 移动宽带硬件 |
Mobile Broadband Hardware |
1832 | 音频硬件 |
Audio Hardware |
1833 | 符合 |
Compliant |
1834 | 不符合 |
Not Compliant |
1835 | 微电源引擎插件 |
Micro Power Engine Plugin |
1901 | 设备驱动程序 |
Device Drivers |
1903 | 设备驱动程序缺失或配置不当可能会导致耗电量增加。 |
Devices with missing or misconfigured drivers can increase power consumption. |
1904 | 设备名 |
Device Name |
1906 | 设备状态 |
Device Status |
1907 | 设备问题代码 |
Device Problem Code |
1908 | 未知设备 |
Unknown Device |
2000 | 睡眠分析 |
Sleep Study |
2010 | 注意: 此报告中不包含第一个连接待机会话的信息。 |
Note: This report does not contain information for the first Connected Standby session. |
2011 | 第一个连接待机会话已在较早的时间范围内启动。若要了解该较早的时间范围,请使用<code>powercfg sleepstudy -duration DURATION</code>。例如,若要针对过去 10 天进行分析,应使用:<br /><pre>powercfg sleepstudy -duration 10</pre> |
The first Connected Standby session started in an earlier time frame. If interested in the earlier time frame, use <code>powercfg sleepstudy -duration DURATION</code>. For example, to analyze the past 10 days:<br /><pre>powercfg sleepstudy -duration 10</pre> |
2020 | 发现激活器的分析错误 |
Analysis errors found for Activators |
2021 | 找到 Fx 设备的分析错误 |
Analysis errors found for Fx Devices |
2022 | 找到 PDC 阶段的分析错误 |
Analysis errors found for PDC phases |
2030 | PDC 阶段的持续时间总和大于 CS 持续时间。 |
The sum of the durations of PDC phases is greater than the CS duration. |
3000 | 系统事件日志 |
System Event Log |
0x50000004 | 信息 |
Information |