| 0xBF9 | 提供 Net 命令的說明資訊。NET HELP [command] 命令 - 顯示那個命令的說明資訊。 |
Provides help information for Net commands.NET HELP [command] command - displays help information on that command. |
| 0xBFA | Net 公用程式不支援此項命令。請嘗試 \"%1 /?\"。 |
This command is not supported by the net utility. Try \"%1 /?\". |
| 0xBFB | 要了解特定命令的詳細資訊，請輸入 HELP 命令名稱 |
For more information on a specific command, type HELP command-name |
| 0xBFC | NET ACCOUNTS[/FORCELOGOFF:{minutes | NO}] [/MINPWLEN:length] [/MAXPWAGE:{days | UNLIMITED}] [/MINPWAGE:days] [/UNIQUEPW:number] [/DOMAIN] |
NET ACCOUNTS[/FORCELOGOFF:{minutes | NO}] [/MINPWLEN:length] [/MAXPWAGE:{days | UNLIMITED}] [/MINPWAGE:days] [/UNIQUEPW:number] [/DOMAIN] |
| 0xBFD | NET ACCOUNTS 可更新使用者帳戶資料庫和修改所有帳戶的密碼和登入條件。使用時不加上選項，NET ACCOUNTS 會顯示密碼、登入限制和網域資訊的目前設定。與 NET ACCOUNTS 併用的選項要生效，有兩個先決條件:- 只有在已經設定使用者帳戶 (使用 [使用者管理員] 或 NET USER 命令) 時， 密碼與登入條件才會生效。- 在網域中驗證登入的所有伺服器上均必須執行 NetLogon 服務。NetLogon 會在 Windows 啟動時自動啟動。/FORCELOGOFF: {minutes | NO} 設定當帳戶到期或有效的登入時數到期時要強制 登出使用者之前的分鐘數。NO 為預設值，可避免 被強制登出。/MINPWLEN:length 設定密碼的最小字元數目。範圍是 0-14 個字元; 預設值是 6 個字元。/MAXPWAGE:{days | UNLIMITED} 設定密碼有效的最長天數。使用 UNLIMITED 代表 沒有限制。/MAXPWAGE 不可以小於 /MINPWAGE。 範圍介於 1-999; 預設是讓值保持不變。/MINPWAGE:days 設定最少要經過幾天後，使用者才可變更密碼。 值設為 0 表示無最短時間。範圍介於 0-999; 預設值是 0天。/MINPWAGE 不可以大於 /MAXPWAGE。/UNIQUEPW:number 要求使用者將密碼變更過指定的次數後，才能 重複使用與之前相同的密碼。最大值為 24。/DOMAIN 在目前網域的網域控制站上執行操作。否則， 會在本機電腦上執行操作。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET ACCOUNTS updates the user accounts database and modifies passwordand logon requirements for all accounts.When used without options, NET ACCOUNTS displays the current settings forpassword, logon limitations, and domain information.Two conditions are required in order for options used withNET ACCOUNTS to take effect:- The password and logon requirements are only effective if user accounts have been set up (use User Manager or the NET USER command).- The NetLogon service must be running on all servers in the domain that verify logon. NetLogon is started automatically when Windows starts./FORCELOGOFF:{minutes | NO} Sets the number of minutes a user has before being forced to log off when the account expires or valid logon hours expire. NO, the default, prevents forced logoff./MINPWLEN:length Sets the minimum number of characters for a password. The range is 0-14 characters; the default is 6 characters./MAXPWAGE:{days | UNLIMITED} Sets the maximum number of days that a password is valid. No limit is specified by using UNLIMITED. /MAXPWAGE can't be less than /MINPWAGE. The range is 1-999; the default is to leave the value unchanged./MINPWAGE:days Sets the minimum number of days that must pass before a user can change a password. A value of 0 sets no minimum time. The range is 0-999; the default is 0 days. /MINPWAGE can't be more than /MAXPWAGE./UNIQUEPW:number Requires that a user's passwords be unique through the specified number of password changes. The maximum value is 24./DOMAIN Performs the operation on a domain controller of the current domain. Otherwise, the operation is performed on the local computer.NET HELP command | MORE displays Help one screen at a time. |
| 0xBFE | NET ACCOUNTSNET HELP ACCOUNTS 描述這個命令的選項。 |
NET ACCOUNTSNET HELP ACCOUNTS describes the options for this command. |
| 0xBFF | NET COMPUTER\\\\computername {/ADD | /DEL} |
NET COMPUTER\\\\computername {/ADD | /DEL} |
| 0xC00 | NET COMPUTER 可新增或刪除網域資料庫的電腦。只能在 Windows NT Servers 上執行這個命令。\\\\computername 指定要新增到網域或從網域刪除的 電腦。/ADD 將指定的電腦新增到網域。/DEL 將指定的電腦從網域移除。 |
NET COMPUTER adds or deletes computers from a domain database. This command is available only on Windows NT Servers.\\\\computername Specifies the computer to add or delete from the domain./ADD Adds the specified computer to the domain./DEL Removes the specified computer from the domain. |
| 0xC01 | NET COMPUTERNET HELP COMPUTER 描述這個命令的選項。 |
NET COMPUTERNET HELP COMPUTER describes the options for this command. |
| 0xC02 | NET CONFIG SERVER[/AUTODISCONNECT:time] [/SRVCOMMENT:\"text\"] [/HIDDEN:{YES | NO}] |
NET CONFIG SERVER[/AUTODISCONNECT:time] [/SRVCOMMENT:\"text\"] [/HIDDEN:{YES | NO}] |
| 0xC03 | NET CONFIG SERVER 可顯示或變更伺服器服務的設定。/AUTODISCONNECT:time 設定使用者的工作階段在中斷連線前， 可維持非使用中狀態的最大分鐘數。 您可以指定 -1 永遠不中斷連線。範圍 是 -1-65535 個字元; 預設值是 15。/SRVCOMMENT:\"text\" 新增伺服器的註解，該註解會在使用 NET VIEW 命令時顯示在 Windows 螢幕中。 將文字括在引號中。/HIDDEN:{YES | NO} 指定是否要讓伺服器的電腦名稱出現 在伺服器的顯示清單上。請注意， 隱藏伺服器並不會變更伺服器上的 權限。預設值是 NO。要顯示伺服器服務的目前設定，請只輸入NET CONFIG SERVER 而不加上參數。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET CONFIG SERVER displays or changes settings for the Server service./AUTODISCONNECT:time Sets the maximum number of minutes a user's session can be inactive before it is disconnected. You can specify -1 to never disconnect. The range is -1-65535 minutes; the default is 15./SRVCOMMENT:\"text\" Adds a comment for the server that is displayed in Windows Screens and with the NET VIEW command. Enclose the text in quotation marks./HIDDEN:{YES | NO} Specifies whether the server's computername appears on display listings of servers. Note that hiding a server does not alter the permissions on that server. The default is NO.To display the current configuration for the Server service,type NET CONFIG SERVER without parameters.NET HELP command | MORE displays Help one screen at a time. |
| 0xC04 | NET CONFIG SERVERNET HELP CONFIG SERVER 描述這個命令的選項。 |
NET CONFIG SERVERNET HELP CONFIG SERVER describes the options for this command. |
| 0xC05 | NET CONFIG[SERVER | WORKSTATION] |
NET CONFIG[SERVER | WORKSTATION] |
| 0xC06 | NET CONFIG 可顯示工作站或伺服器服務的設定資訊。使用時不加上 SERVER 或 WORKSTATION 參數時，它會顯示可設定服務的清單。要取得設定服務的說明，請輸入 NET HELP CONFIG 服務。SERVER 顯示有關伺服器服務設定的資訊。WORKSTATION 顯示有關工作站服務設定的資訊。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET CONFIG displays configuration information of the Workstation orServer service. When used without the SERVER or WORKSTATION switch,it displays a list of configurable services. To get help withconfiguring a service, type NET HELP CONFIG service.SERVER Displays information about the configuration of the Server service.WORKSTATION Displays information about the configuration of the Workstation service.NET HELP command | MORE displays Help one screen at a time. |
| 0xC07 | NET CONFIGNET HELP CONFIG 描述這個命令的選項。 |
NET CONFIGNET HELP CONFIG describes the options for this command. |
| 0xC08 | NET CONTINUEservice |
NET CONTINUEservice |
| 0xC09 | NET CONTINUE 可重新啟動由 NET PAUSE 暫停的Windows 服務。service 是暫停的服務。 例如，下列其中一個服務: NETLOGON SCHEDULE SERVER WORKSTATIONNET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET CONTINUE reactivates a Windows service that has beensuspended by NET PAUSE.service Is the paused service. For example, one of the following: NETLOGON SCHEDULE SERVER WORKSTATIONNET HELP command | MORE displays Help one screen at a time. |
| 0xC0A | NET CONTINUENET HELP CONTINUE描述這個命令的選項。 |
NET CONTINUENET HELP CONTINUE describes the options for this command. |
| 0xC0B | NET FILE[id [/CLOSE]] |
NET FILE[id [/CLOSE]] |
| 0xC0C | NET FILE 可關閉共用檔案和移除檔案鎖定。使用時不加上選項，就會列出伺服器上已開啟的檔案。清單包含指派給已開啟檔案的識別碼、檔案的路徑名稱、使用者名稱和檔案上的鎖定數目。這個命令只能在執行伺服器服務的電腦上運作。id 是檔案的識別碼。/CLOSE 可關閉開啟的檔案和移除檔案鎖定。請從共用此檔案的 伺服器上輸入這個命令。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET FILE closes a shared file and removes file locks. When used withoutoptions, it lists the open files on a server. The listing includes theidentification number assigned to an open file, the pathname of the file,the username, and the number of locks on the file.This command works only on computers running the Server service.id Is the identification number of the file./CLOSE Closes an open file and removes file locks. Type this command from the server where the file is shared.NET HELP command | MORE displays Help one screen at a time. |
| 0xC0D | NET FILENET HELP FILE 描述這個命令的選項。 |
NET FILENET HELP FILE describes the options for this command. |
| 0xC0E | NET GROUP[groupname [/COMMENT:\"text\"]] [/DOMAIN] groupname {/ADD [/COMMENT:\"text\"] | /DELETE} [/DOMAIN] groupname username [...] {/ADD | /DELETE} [/DOMAIN] |
NET GROUP[groupname [/COMMENT:\"text\"]] [/DOMAIN] groupname {/ADD [/COMMENT:\"text\"] | /DELETE} [/DOMAIN] groupname username [...] {/ADD | /DELETE} [/DOMAIN] |
| 0xC0F | NET GROUP 可新增、顯示或修改伺服器上的全域群組。使用時不加上參數，就會顯示伺服器上的群組名稱。groupname 是要新增、展開或刪除的群組名稱。 只提供一個群組名稱以檢視該群組 中的使用者清單。/COMMENT:\"text\" 新增新的或現有群組的註解。將文字 括在引號中。/DOMAIN 在目前網域的網域控制站上執行 操作。否則，在本機電腦上執行操作。username[ ...] 列出要新增到群組或從群組移除的一或多個 使用者名稱。以空白分隔多個使用者名稱項目。/ADD 新增群組或將使用者名稱新增到群組。/DELETE 移除群組或從群組將使用者名稱移除。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET GROUP adds, displays, or modifies global groups on servers. Usedwithout parameters, it displays the groupnames on the server.groupname Is the name of the group to add, expand, or delete. Supply only a groupname to view a list of users in a group./COMMENT:\"text\" Adds a comment for a new or existing group. Enclose the text in quotation marks./DOMAIN Performs the operation on a domain controller of the current domain. Otherwise, the operation is performed on the local computer.username[ ...] Lists one or more usernames to add to or remove from a group. Separate multiple username entries with a space./ADD Adds a group, or adds a username to a group./DELETE Removes a group, or removes a username from a group.NET HELP command | MORE displays Help one screen at a time. |
| 0xC10 | NET GROUPNET HELP GROUP 描述這個命令的選項。 |
NET GROUPNET HELP GROUP describes the options for this command. |
| 0xC11 | NET HELPcommand -或-NET command /HELP |
NET HELPcommand -or-NET command /HELP |
| 0xC12 | 可用的命令有: NET ACCOUNTS NET HELPMSG NET STATISTICS NET COMPUTER NET LOCALGROUP NET STOP NET CONFIG NET PAUSE NET TIME NET CONTINUE NET SESSION NET USE NET FILE NET SHARE NET USER NET GROUP NET START NET VIEW NET HELP NET HELP NAMES 說明 NET HELP 語法行中的各種名稱類型。 NET HELP SERVICES 列出您可以啟動的一些服務。 NET HELP SYNTAX 說明如何閱讀 NET HELP 語法行。 NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
Commands available are: NET ACCOUNTS NET HELPMSG NET STATISTICS NET COMPUTER NET LOCALGROUP NET STOP NET CONFIG NET PAUSE NET TIME NET CONTINUE NET SESSION NET USE NET FILE NET SHARE NET USER NET GROUP NET START NET VIEW NET HELP NET HELP NAMES explains different types of names in NET HELP syntax lines. NET HELP SERVICES lists some of the services you can start. NET HELP SYNTAX explains how to read NET HELP syntax lines. NET HELP command | MORE displays Help one screen at a time. |
| 0xC13 | NET HELPNET HELP 描述這個命令的選項。 |
NET HELPNET HELP describes the options for this command. |
| 0xC14 | NET HELPMSGmessage# |
NET HELPMSGmessage# |
| 0xC15 | NET HELPMSG 可顯示有關 Windows 網路訊息的資訊(例如錯誤、警告和警示訊息)。當您輸入 NET HELPMSG 和數字錯誤 (例如，\"net helpmsg 2182\") 時，Windows會告訴您相關訊息並建議您可採取的動作以解決問題。message# 是需要說明的數字 Windows 錯誤。 |
NET HELPMSG displays information about Windows network messages(such as error, warning, and alert messages). When you type NET HELPMSG andthe numerical error (for example, \"net helpmsg 2182\"), Windows tells youabout the message and suggests actions you can take to solve the problem.message# Is the numerical Windows error with which you need help. |
| 0xC16 | NET HELPMSGNET HELP HELPMSG 描述這個命令的選項。 |
NET HELPMSGNET HELP HELPMSG describes the options for this command. |
| 0xC17 | NET LOCALGROUP[groupname [/COMMENT:\"text\"]] [/DOMAIN] groupname {/ADD [/COMMENT:\"text\"] | /DELETE} [/DOMAIN] groupname name [...] {/ADD | /DELETE} [/DOMAIN] |
NET LOCALGROUP[groupname [/COMMENT:\"text\"]] [/DOMAIN] groupname {/ADD [/COMMENT:\"text\"] | /DELETE} [/DOMAIN] groupname name [...] {/ADD | /DELETE} [/DOMAIN] |
| 0xC18 | NET LOCALGROUP 可修改電腦上的本機群組。使用時不加上選項，就會顯示電腦上的本機群組。 groupname 是要新增、展開或刪除的本機群組名稱。 只提供一個群組名稱以檢視本機群組中的 使用者或全域群組清單。/COMMENT:\"text\" 新增新的或現有群組的註解。將文字 括在引號中。/DOMAIN 在目前網域的網域控制站上執行操作。 否則，在本機工作站上執行操作。name [ ...] 列出要新增到本機群組或從本機群組移除的一或 多個使用者名稱或群組名稱。以空白分隔多個 項目。可以為使用者或全域群組的名稱，但不會是 其他本機群組的名稱。如果使用者來自其他網域， 請在使用者名稱的開頭加上網域名稱 (例如， SALES\\RALPHR)。/ADD 將群組名稱或使用者名稱新增到本機群組。必須對 使用此命令新增到本機群組使用者或全域群組 建立帳戶。/DELETE 將群組名稱或使用者名稱從本機群組移除。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET LOCALGROUP modifies local groups on computers. When used withoutoptions, it displays the local groups on the computer.groupname Is the name of the local group to add, expand, or delete. Supply only a groupname to view a list of users or global groups in a local group./COMMENT:\"text\" Adds a comment for a new or existing group. Enclose the text in quotation marks./DOMAIN Performs the operation on the domain controller of the current domain. Otherwise, the operation is performed on the local workstation.name [ ...] Lists one or more usernames or groupnames to add or to remove from a local group. Separate multiple entries with a space. Names may be users or global groups, but not other local groups. If a user is from another domain, preface the username with the domain name (for example, SALES\\RALPHR)./ADD Adds a groupname or username to a local group. An account must be established for users or global groups added to a local group with this command./DELETE Removes a groupname or username from a local group.NET HELP command | MORE displays Help one screen at a time. |
| 0xC19 | NET LOCALGROUPNET HELP LOCALGROUP 描述這個命令的選項。 |
NET LOCALGROUPNET HELP LOCALGROUP describes the options for this command. |
| 0xC1A | NET PAUSEservice |
NET PAUSEservice |
| 0xC1B | NET PAUSE 可暫停 Windows 服務或資源。暫停某項服務，讓它暫時停止執行。service 是要暫停的服務。 例如，下列其中一個服務: NETLOGON SCHEDULE SERVER WORKSTATIONNET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET PAUSE suspends a Windows service or resource. Pausing a serviceputs it on hold.service Is the service to be paused. For example, one of the following: NETLOGON SCHEDULE SERVER WORKSTATIONNET HELP command | MORE displays Help one screen at a time. |
| 0xC1C | NET PAUSENET HELP PAUSE 描述這個命令的選項。 |
NET PAUSENET HELP PAUSE describes the options for this command. |
| 0xC1D | NET SESSION[\\\\computername] [/DELETE] [/LIST] |
NET SESSION[\\\\computername] [/DELETE] [/LIST] |
| 0xC1E | NET SESSION 列示或中斷網路上電腦之間工作階段的連線。若未使用選項，它會針對目前焦點的電腦，顯示所有的工作階段的相關資訊。此命令只能在伺服器上使用。\\\\computername 列示指定電腦的工作階段資訊。/DELETE 結束本機電腦與 computername 之間的工作階段， 並關閉電腦上工作階段所有開啟的檔案。 若省略 computername，則會結束所有的工作階段。/LIST 以清單而非表格顯示資訊。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET SESSION lists or disconnects sessions between the computer and othercomputers on the network. When used without options, it displays informationabout all sessions with the computer of current focus.This command works only on servers.\\\\computername Lists the session information for the named computer./DELETE Ends the session between the local computer and computername, and closes all open files on the computer for the session. If computername is omitted, all sessions are ended./LIST Displays information in a list rather than a table.NET HELP command | MORE displays Help one screen at a time. |
| 0xC1F | NET SESSIONNET HELP SESSION 描述這個命令的選項。 |
NET SESSIONNET HELP SESSION describes the options for this command. |
| 0xC20 | NET SHAREsharename sharename=drive:path [/GRANT:user,[READ | CHANGE | FULL]] [/USERS:number | /UNLIMITED] [/REMARK:\"text\"] [/CACHE:Manual | Documents| Programs | BranchCache | None] sharename [/USERS:number | /UNLIMITED] [/REMARK:\"text\"] [/CACHE:Manual | Documents | Programs | BranchCache | None] {sharename | devicename | drive:path} /DELETE sharename \\\\computername /DELETE |
NET SHAREsharename sharename=drive:path [/GRANT:user,[READ | CHANGE | FULL]] [/USERS:number | /UNLIMITED] [/REMARK:\"text\"] [/CACHE:Manual | Documents| Programs | BranchCache | None] sharename [/USERS:number | /UNLIMITED] [/REMARK:\"text\"] [/CACHE:Manual | Documents | Programs | BranchCache | None] {sharename | devicename | drive:path} /DELETE sharename \\\\computername /DELETE |
| 0xC21 | NET SHARE 讓伺服器的資源可供網路使用者使用。若未使用選項，它會列示電腦上所有共用資源的相關資訊。Windows 會針對每一資源，報告裝置名稱或路徑名稱，以及相關的描述性備註。sharename 為共用資源的網路名稱。在輸入 NET SHARE 時加上 sharename，只會顯示 有關該項共用的資訊。drive:path 指定要共用目錄的絕對路徑。/GRANT:user,perm 建立共用時加上安全性描述元，可將要求的權限 授與指定的使用者。此選項可多次使用，以便將 共用權限授與多位使用者。/USERS:number 設定可同時存取共用資源的使用者數目上限。/UNLIMITED 指定可同時存取共用資源的使用者數目不限。/REMARK:\"text\" 新增關於資源的描述性備註。 將文字置於引號中。devicename 為 sharename 所共用的一或多部印表機 (LPT1: 至 LPT9:)。/DELETE 停止共用資源。/CACHE:Manual 啟用此共用的程式及文件的手動用戶端快取功能。/CACHE:Documents 啟用此共用的文件自動快取功能。/CACHE:Programs 啟用此共用的文件及程式自動快取功能。/CACHE:BranchCache 手動快取此共用中啟用 BranchCache 的文件/CACHE:None 停用此共用的快取功能。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET SHARE makes a server's resources available to network users. Whenused without options, it lists information about all resources beingshared on the computer. For each resource, Windows reports thedevicename(s) or pathname(s) and a descriptive comment associated with it.sharename Is the network name of the shared resource. Type NET SHARE with a sharename only to display information about that share.drive:path Specifies the absolute path of the directory to be shared./GRANT:user,perm Creates the share with a security descriptor that gives the requested permissions to the specified user. This option may be used more than once to give share permissions to multiple users./USERS:number Sets the maximum number of users who can simultaneously access the shared resource./UNLIMITED Specifies an unlimited number of users can simultaneously access the shared resource/REMARK:\"text\" Adds a descriptive comment about the resource. Enclose the text in quotation marks.devicename Is one or more printers (LPT1: through LPT9:) shared by sharename./DELETE Stops sharing the resource./CACHE:Manual Enables manual client caching of programs and documents from this share/CACHE:Documents Enables automatic caching of documents from this share/CACHE:Programs Enables automatic caching of documents and programs from this share/CACHE:BranchCache Manual caching of documents with BranchCache enabled from this share/CACHE:None Disables caching from this shareNET HELP command | MORE displays Help one screen at a time. |
| 0xC22 | NET SHARENET HELP SHARE 描述這個命令的選項。 |
NET SHARENET HELP SHARE describes the options for this command. |
| 0xC23 | NET START BROWSER |
NET START BROWSER |
| 0xC24 | NET START BROWSER 啟動瀏覽器服務。瀏覽器服務支援在網路上瀏覽電腦的功能，以及被網路上的其他電腦所瀏覽。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START BROWSER starts the Browser service. The Browser servicesupports browsing computers on the network and being browsed by othercomputers on the network.NET HELP command | MORE displays Help one screen at a time. |
| 0xC25 | NET START BROWSER這個命令沒有選項。 |
NET START BROWSERThis command has no options. |
| 0xC26 | NET START EVENTLOG |
NET START EVENTLOG |
| 0xC27 | NET START EVENTLOG 可啟動事件記錄服務，此服務可記錄本機電腦上的事件。必須在使用事件檢視器來檢視記錄的事件之前，啟用此項服務。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START EVENTLOG starts the event logging service, which logs events onthe local computer. This service must be started prior to usingthe Event Viewer to view the logged events.NET HELP command | MORE displays Help one screen at a time. |
| 0xC28 | NET START EVENTLOG這個命令沒有選項。 |
NET START EVENTLOGThis command has no options. |
| 0xC29 | NET START NETLOGON |
NET START NETLOGON |
| 0xC2A | NET START NETLOGON 可啟動 Windows NetLogon 服務，此服務可驗證登入要求，以及控制使用者帳戶資料庫的複寫。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START NETLOGON starts the Windows NetLogon service, whichverifies logon requests and controls replication of the useraccounts database. NET HELP command | MORE displays Help one screen at a time. |
| 0xC2B | NET START NETLOGON這個命令沒有選項。 |
NET START NETLOGONThis command has no options. |
| 0xC2C | NET START RPCSS |
NET START RPCSS |
| 0xC2D | NET START RPCSS 可啟動 Windows RPCSS 服務。NET HELP 命令 | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START RPCSS starts the Windows RPCSS service.NET HELP command | MORE displays Help one screen at a time. |
| 0xC2E | NET START RPCSS這個命令沒有選項。 |
NET START RPCSSThis command has no options. |
| 0xC2F | NET START SCHEDULE |
NET START SCHEDULE |
| 0xC30 | NET START SCHEDULE 可啟動 Windows 排程服務。必須執行排程服務，才能使用排程工作資料夾或 AT 命令來排程事件。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START SCHEDULE starts the Windows Schedule service.The Schedule service must be running to schedule events usingthe Scheduled Tasks folder or the AT command.NET HELP command | MORE displays Help one screen at a time. |
| 0xC31 | NET START SCHEDULE這個命令沒有選項。 |
NET START SCHEDULEThis command has no options. |
| 0xC32 | NET START SERVER |
NET START SERVER |
| 0xC33 | NET START SERVER 可啟動 Windows Server 服務，此項服務可控制對資源的存取。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START SERVER starts the Windows Server service, which controlsaccess to resources.NET HELP command | MORE displays Help one screen at a time. |
| 0xC34 | NET START SERVER這個命令沒有選項。 |
NET START SERVERThis command has no options. |
| 0xC35 | NET START UPS |
NET START UPS |
| 0xC36 | NET START UPS 可啟動 Windows UPS 服務，此項服務可對您的電腦提供不斷電服務。在啟動 UPS 服務之前，應先設定該項服務。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START UPS starts the Windows UPS service, whichprovides uninterrupted power service to your computer. The UPS servicemust be configured before starting.NET HELP command | MORE displays Help one screen at a time. |
| 0xC37 | NET START UPS這個命令沒有選項。 |
NET START UPSThis command has no options. |
| 0xC38 | NET START WORKSTATION |
NET START WORKSTATION |
| 0xC39 | NET START WORKSTATION 可啟動 Windows Workstation 服務，可讓您的電腦使用網路上的共用資源。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START WORKSTATION starts the Windows Workstation service, whichenables your computer to use shared resources on the network.NET HELP command | MORE displays Help one screen at a time. |
| 0xC3A | NET START WORKSTATION這個命令沒有選項。 |
NET START WORKSTATIONThis command has no options. |
| 0xC3B | NET START[service] |
NET START[service] |
| 0xC3C | NET START 會列示執行中服務。service 可包含下列服務之一: BROWSER DHCP CLIENT EVENTLOG FILE REPLICATION NETLOGON PLUG AND PLAY REMOTE ACCESS CONNECTION MANAGER ROUTING AND REMOTE ACCESS RPCSS SCHEDULE SERVER SPOOLER TCP/IP NETBIOS HELPER UPS WORKSTATION在命令提示字元輸入時，必須以引號括住兩個字或兩個字以上的服務名稱。例如，NET START \"DHCP Client\" 可啟動 DHCP Client 服務。NET START 也可啟動未隨 Windows 提供的服務。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET START lists running services.service May include one of the following services: BROWSER DHCP CLIENT EVENTLOG FILE REPLICATION NETLOGON PLUG AND PLAY REMOTE ACCESS CONNECTION MANAGER ROUTING AND REMOTE ACCESS RPCSS SCHEDULE SERVER SPOOLER TCP/IP NETBIOS HELPER UPS WORKSTATIONWhen typed at the command prompt, service names of two words or more mustbe enclosed in quotation marks. For example, NET START \"DHCP Client\"starts the DHCP Client service.NET START can also start services not provided with Windows.NET HELP command | MORE displays Help one screen at a time. |
| 0xC3D | NET STARTNET HELP START 描述這個命令的選項。 |
NET STARTNET HELP START describes the options for this command. |
| 0xC3E | NET STATISTICS[WORKSTATION] |
NET STATISTICS[WORKSTATION] |
| 0xC3F | NET STATISTICS 可顯示本機「工作站」服務的統計資料記錄檔記錄。使用時不加上參數，NET STATISTICS 將會顯示有統計資料可用的服務。WORKSTATION 顯示「工作站」服務統計資料。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET STATISTICS displays the statistics log for the local Workstationservice. Used without parameters, NET STATISTICS displaysthe services for which statistics are available.WORKSTATION Displays the Workstation service statistics.NET HELP command | MORE displays Help one screen at a time. |
| 0xC40 | NET STATISTICSNET HELP STATISTICS 描述這個命令的選項。 |
NET STATISTICSNET HELP STATISTICS describes the options for this command. |
| 0xC41 | NET STOPservice |
NET STOPservice |
| 0xC42 | NET STOP 可停止 Windows 服務。停止服務會取消服務正在使用的任何網路連線。此外，某些服務相依於其他服務。停止一個服務可能會停止其他服務。某些服務不能停止。service 可以是下列服務之一: BROWSER DHCP CLIENT FILE REPLICATION NETLOGON REMOTE ACCESS CONNECTION MANAGER ROUTING AND REMOTE ACCESS SCHEDULE SERVER SPOOLER TCP/IP NETBIOS HELPER UPS WORKSTATIONNET STOP 也可停止未隨 Windows 提供的服務。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET STOP stops Windows services.Stopping a service cancels any network connections the service isusing. Also, some services are dependent on others. Stopping oneservice can stop others.Some services cannot be stopped.service May be one of the following services: BROWSER DHCP CLIENT FILE REPLICATION NETLOGON REMOTE ACCESS CONNECTION MANAGER ROUTING AND REMOTE ACCESS SCHEDULE SERVER SPOOLER TCP/IP NETBIOS HELPER UPS WORKSTATIONNET STOP can also stop services not provided with Windows.NET HELP command | MORE displays Help one screen at a time. |
| 0xC43 | NET STOPNET HELP STOP 描述這個命令的選項。 |
NET STOPNET HELP STOP describes the options for this command. |
| 0xC44 | NET TIME[\\\\computername | /DOMAIN[:domainname] | /RTSDOMAIN[:domainname]] [/SET] |
NET TIME[\\\\computername | /DOMAIN[:domainname] | /RTSDOMAIN[:domainname]] [/SET] |
| 0xC45 | NET TIME 可將電腦的時鐘與其他電腦或網域的時鐘進行同步處理，或顯示某個電腦或網域的時間。若在 Windows Server 網域中使用時未加上選項，則會顯示指定為網域時間伺服器之電腦的目前日期和時間。\\\\computername 是您想要檢查或與其同步的電腦名稱。/DOMAIN[:domainname] 指定與 domainname 的網域主控站同步時間。/RTSDOMAIN[:domainname] 指定與 domainname 的可靠時間伺服器同步。/SET 將電腦的時間與指定的電腦或網域上的時間同步。/QUERYSNTP 與 /SETSNTP 選項已經過時。請使用 w32tm.exe 設定 Windows時間服務。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET TIME synchronizes the computer's clock with that of another computeror domain, or displays the time for a computer or domain. When used withoutoptions on a Windows Server domain, it displays the current date and time at the computer designated as the time server for the domain.\\\\computername Is the name of the computer you want to check or synchronize with./DOMAIN[:domainname] Specifies to synchronize the time from the Primary Domain Controller of domainname./RTSDOMAIN[:domainname] Specifies to synchronize with a Reliable Time Server from domainname./SET Synchronizes the computer's time with the time on the specified computer or domain. The /QUERYSNTP and /SETSNTP options have been deprecated. Please use w32tm.exe to configure the Windows Time Service.NET HELP command | MORE displays Help one screen at a time. |
| 0xC46 | NET TIMENET HELP TIME 描述這個命令的選項。 |
NET TIMENET HELP TIME describes the options for this command. |
| 0xC47 | NET USE[devicename | *] [\\\\computername\\sharename[\\volume] [password | *]] [/USER:[domainname\\]username] [/USER:[dotted domain name\\]username] [/USER:[username@dotted domain name] [/SMARTCARD] [/SAVECRED] [[/DELETE] | [/PERSISTENT:{YES | NO}]]NET USE {devicename | *} [password | *] /HOMENET USE [/PERSISTENT:{YES | NO}] |
NET USE[devicename | *] [\\\\computername\\sharename[\\volume] [password | *]] [/USER:[domainname\\]username] [/USER:[dotted domain name\\]username] [/USER:[username@dotted domain name] [/SMARTCARD] [/SAVECRED] [[/DELETE] | [/PERSISTENT:{YES | NO}]]NET USE {devicename | *} [password | *] /HOMENET USE [/PERSISTENT:{YES | NO}] |
| 0xC48 | NET USE 可將電腦連線到共用資源，或中斷電腦與共用資源的連線。使用時不加上選項，就會列出該台電腦的連線。devicename 指派一個名稱以連線到資源，或是指定要中斷連線的裝置。 有兩種裝置名稱: 磁碟機 (D: 到 Z:) 和印表機 (LPT1: 到 LPT3:)。輸入星號而不輸入特定的裝置名稱，以指派下一個 可用的裝置名稱。\\\\computername 是控制共用資源的電腦名稱。如果電腦名稱包含空白字元，請 以雙引號 (\" \") 括住雙反斜線 (\\\\) 和電腦名稱。電腦名稱 的長度可以有 1 到 15 個字元。\\sharename 是共用資源的網路名稱。\\volume 指定伺服器上的 NetWare 磁碟區。電腦必須已安裝並執行 Client Service for Netware (Windows Workstation) 或 Gateway Service for Netware (Windows Server)， 您才能連線到 NetWare 伺服器。password 是存取共用資源所需的密碼。* 可產生一個提示要求輸入密碼。當您在密碼提示輸入密碼時， 密碼不會顯示出來。/USER 指定跟建立連線的使用者不同的使用者名稱。domainname 指定其他網域。如果省略網域，便會使用目前登入的網域。username 指定要用以登入的使用者名稱。/SMARTCARD 指定該連線是要使用智慧卡上的認證。/SAVECRED 指定要儲存使用者名稱和密碼。除非命令提示要輸入使用者 名稱和密碼，否則會略過這個參數。/HOME 讓使用者連線到其主目錄。/DELETE 中斷網路連線並從持續連線清單移除連線。/PERSISTENT 控制持續網路連線的使用。預設值為上次使用的設定。YES 在建立起連線時儲存連線，並在下次登入時還原。NO 不儲存所建立的連線或後續連線; 下次登入時將會還原現有的 連線。使用 /DELETE 參數移除持續連線。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET USE connects a computer to a shared resource or disconnects acomputer from a shared resource. When used without options, it liststhe computer's connections.devicename Assigns a name to connect to the resource or specifies the device to be disconnected. There are two kinds of devicenames: disk drives (D: through Z:) and printers (LPT1: through LPT3:). Type an asterisk instead of a specific devicename to assign the next available devicename.\\\\computername Is the name of the computer controlling the shared resource. If the computername contains blank characters, enclose the double backslash (\\\\) and the computername in quotation marks (\" \"). The computername may be from 1 to 15 characters long.\\sharename Is the network name of the shared resource.\\volume Specifies a NetWare volume on the server. You must have Client Services for Netware (Windows Workstations) or Gateway Service for Netware (Windows Server) installed and running to connect to NetWare servers.password Is the password needed to access the shared resource.* Produces a prompt for the password. The password is not displayed when you type it at the password prompt./USER Specifies a different username with which the connection is made.domainname Specifies another domain. If domain is omitted, the current logged on domain is used.username Specifies the username with which to logon./SMARTCARD Specifies that the connection is to use credentials on a smart card./SAVECRED Specifies that the username and password are to be saved. This switch is ignored unless the command prompts for username and password./HOME Connects a user to their home directory./DELETE Cancels a network connection and removes the connection from the list of persistent connections./PERSISTENT Controls the use of persistent network connections. The default is the setting used last.YES Saves connections as they are made, and restores them at next logon.NO Does not save the connection being made or subsequent connections; existing connections will be restored at next logon. Use the /DELETE switch to remove persistent connections.NET HELP command | MORE displays Help one screen at a time. |
| 0xC49 | NET USENET HELP USE 描述這個命令的選項。 |
NET USENET HELP USE describes the options for this command. |
| 0xC4A | NET USER[username [password | *] [options]] [/DOMAIN] username {password | *} /ADD [options] [/DOMAIN] username [/DELETE] [/DOMAIN] username [/TIMES:{times | ALL}] username [/ACTIVE: {YES | NO}] |
NET USER[username [password | *] [options]] [/DOMAIN] username {password | *} /ADD [options] [/DOMAIN] username [/DELETE] [/DOMAIN] username [/TIMES:{times | ALL}] username [/ACTIVE: {YES | NO}] |
| 0xC4B | NET USER 可建立和修改電腦上的使用者帳戶。使用時不加上參數，便會列出該台電腦的使用者帳戶。使用者帳戶資訊是儲存在使用者帳戶資料庫中。username 是要新增、刪除、修改或檢視的使用者帳戶名稱。使用者帳戶名稱最 多可有 20 個字元。password 指派或變更使用者帳戶的密碼。密碼必須符合以 NET ACCOUNTS 命令 的 /MINPWLEN 選項設定的最小長度。最多可有 14 個字元。* 可產生一個提示要求輸入密碼。當您在密碼提示輸入密碼時，密碼不 會顯示出來。/DOMAIN 在目前網域的網域控制站上執行操作。/ADD 將使用者帳戶新增到使用者帳戶資料庫。/DELETE 將使用者帳戶從使用者帳戶資料庫移除。選項 如下所示: 選項 描述 -------------------------------------------------------------------- /ACTIVE:{YES | NO} 啟用或停用帳戶。如果帳戶不在使用中，該使用者 便無法存取伺服器。預設值是 YES。 /COMMENT:\"text\" 提供有關使用者帳戶的描述註解。請將文字括在引 號中。 /COUNTRYCODE:nnn 使用作業系統國碼/地區碼以針對使用者的說明和 錯誤訊息執行指定的語言檔案。0 這個值表示預設 的國碼/地區碼。 /EXPIRES:{date | NEVER} 如果設定日期，便會造成帳戶到期。NEVER 可將帳 戶設為沒有時間限制。到期日的格式為 mm/dd/yy(yy)。月份可以是數字、拼寫文字或使用 三個字母縮寫。年份可以是兩個或四個數字。請使 用斜線 (/) (不含空格) 來分隔日期的各部分。 /FULLNAME:\"name\" 是使用者的全名 (而非使用者名稱)。請將文字括 在引號中。 /HOMEDIR:pathname 設定使用者主目錄的路徑。路徑必須存在。 /PASSWORDCHG:{YES | NO} 指定使用者是否可變更其密碼。預設值是 YES。 /PASSWORDREQ:{YES | NO} 指定使用者帳戶是否必須要有密碼。預設值 是 YES。 /LOGONPASSWORDCHG:{YES|NO} 指定使用者是否必須在下次登入時變更密碼。 預設值是 NO。 /PROFILEPATH[:path] 設定使用者登入設定檔的路徑。 /SCRIPTPATH:pathname 是使用者登入指令碼的位置。 /TIMES:{times | ALL} 是登入時數。TIMES 的表示方式為 day[-day][,day[-day]],time[-time][,time [-time]]，限制為一次增加 1 小時。天可以是拼 寫文字或縮寫。小時可以是 12 小時制或 24 小時 制。若為 12 小時制，可使用 am、pm、a.m. 或 p.m.。ALL 代表使用者永遠可以登入，而空白值代 表使用者永遠無法登入。以逗號來分隔天和時間項 目，而以分號來分隔多個天和時間項目。 /USERCOMMENT:\"text\" 可讓系統管理員對帳戶新增或變更使用者註解。 /WORKSTATIONS:{computername[,...] | *} 列出使用者可從其上登入網路的電腦，最多八台。 如果 /WORKSTATIONS 沒有清單或清單是 *，使用 者便可從任何電腦登入。NET HELP command | MORE 以一次一頁螢幕的方式來顯示說明。 |
NET USER creates and modifies user accounts on computers. When usedwithout switches, it lists the user accounts for the computer. Theuser account information is stored in the user accounts database.username Is the name of the user account to add, delete, modify, or view. The name of the user account can have as many as 20 characters.password Assigns or changes a password for the user's account. A password must satisfy the minimum length set with the /MINPWLEN option of the NET ACCOUNTS command. It can have as many as 14 characters.* Produces a prompt for the password. The password is not displayed when you type it at a password prompt./DOMAIN Performs the operation on a domain controller of the current domain./ADD Adds a user account to the user accounts database./DELETE Removes a user account from the user accounts database.Options Are as follows: Options Description -------------------------------------------------------------------- /ACTIVE:{YES | NO} Activates or deactivates the account. If the account is not active, the user cannot access the server. The default is YES. /COMMENT:\"text\" Provides a descriptive comment about the user's account. Enclose the text in quotation marks. /COUNTRYCODE:nnn Uses the operating system country/region code to implement the specified language files for a user's help and error messages. A value of 0 signifies the default country/region code. /EXPIRES:{date | NEVER} Causes the account to expire if date is set. NEVER sets no time limit on the account. An expiration date is in the form mm/dd/yy(yy). Months can be a number, spelled out, or abbreviated with three letters. Year can be two or four numbers. Use slashes(/) (no spaces) to separate parts of the date. /FULLNAME:\"name\" Is a user's full name (rather than a username). Enclose the name in quotation marks. /HOMEDIR:pathname Sets the path for the user's home directory. The path must exist. /PASSWORDCHG:{YES | NO} Specifies whether users can change their own password. The default is YES. /PASSWORDREQ:{YES | NO} Specifies whether a user account must have a password. The default is YES. /LOGONPASSWORDCHG:{YES|NO} Specifies whether user should change their own password at the next logon.The default is NO. /PROFILEPATH[:path] Sets a path for the user's logon profile. /SCRIPTPATH:pathname Is the location of the user's logon script. /TIMES:{times | ALL} Is the logon hours. TIMES is expressed as day[-day][,day[-day]],time[-time][,time [-time]], limited to 1-hour increments. Days can be spelled out or abbreviated. Hours can be 12- or 24-hour notation. For 12-hour notation, use am, pm, a.m., or p.m. ALL means a user can always log on, and a blank value means a user can never log on. Separate day and time entries with a comma, and separate multiple day and time entries with a semicolon. /USERCOMMENT:\"text\" Lets an administrator add or change the User Comment for the account. /WORKSTATIONS:{computername[,...] | *} Lists as many as eight computers from which a user can log on to the network. If /WORKSTATIONS has no list or if the list is *, the user can log on from any computer.NET HELP command | MORE displays Help one screen at a time. |
| 0xC4C | NET USERNET HELP USER 描述這個命令的選項。 |
NET USERNET HELP USER describes the options for this command. |
| 0xC4D | NET VIEW[\\\\computername [/CACHE] | [/ALL] | /DOMAIN[:domainname]] |
NET VIEW[\\\\computername [/CACHE] | [/ALL] | /DOMAIN[:domainname]] |
| 0xC4E | NET VIEW 顯示電腦上共用的資源清單。不使用任何選項執行時，它會顯示目前網域或網路中的電腦清單。\\\\computername 您要檢視共用資源的電腦/DOMAIN:domainname 指定您要檢視可用電腦的網域。 如果省略 domainname，則會顯示區域網路 中的所有網域。/CACHE 顯示指定電腦上資源的離線用戶端 快取設定。/ALL\t\t\t 顯示所有共用，包括 $ 共用 |
NET VIEW displays a list of resources being shared on a computer. When usedwithout options, it displays a list of computers in the current domain ornetwork.\\\\computername Is a computer whose shared resources you want to view./DOMAIN:domainname Specifies the domain for which you want to view the available computers. If domainname is omitted, displays all domains in the local area network./CACHE Displays the offline client caching settings for the resources on the specified computer/ALL\t\t\t Displays all the shares including the $ shares |
| 0xC4F | NET VIEWNET HELP VIEW 描述這個命令的選項。 |
NET VIEWNET HELP VIEW describes the options for this command. |
| 0xC50 | NET [ ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP | HELPMSG | LOCALGROUP | PAUSE | SESSION | SHARE | START | STATISTICS | STOP | TIME | USE | USER | VIEW ] |
NET [ ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP | HELPMSG | LOCALGROUP | PAUSE | SESSION | SHARE | START | STATISTICS | STOP | TIME | USE | USER | VIEW ] |
| 0xC51 | 關鍵字 NET 可指定 Windows 命令。NET HELP 命令 | MORE 以一次一頁螢幕的方式來顯示說明。 |
The keyword NET specifies Windows commands.NET HELP command | MORE displays Help one screen at a time. |
| 0xC52 | NETNET 描述這個命令的選項。 |
NETNET describes the options for this command. |
| 0xC53 | SERVICESNET START 可用來啟動服務，包括: NET START BROWSER NET START DHCP CLIENT NET START EVENTLOG NET START FILE REPLICATION NET START NETLOGON NET START PLUG AND PLAY NET START REMOTE ACCESS CONNECTION MANAGER NET START ROUTING AND REMOTE ACCESS NET START RPCSS NET START SCHEDULE NET START SERVER NET START SPOOLER NET START TCP/IP NETBIOS HELPER NET START UPS NET START WORKSTATION在命令提示字元輸入時，必須以引號括住兩個字或兩個字以上的服務名稱。例如，NET START \"DHCP Client\" 可啟動 DHCP Client 服務。 |
SERVICESNET START can be used to start services, including: NET START BROWSER NET START DHCP CLIENT NET START EVENTLOG NET START FILE REPLICATION NET START NETLOGON NET START PLUG AND PLAY NET START REMOTE ACCESS CONNECTION MANAGER NET START ROUTING AND REMOTE ACCESS NET START RPCSS NET START SCHEDULE NET START SERVER NET START SPOOLER NET START TCP/IP NETBIOS HELPER NET START UPS NET START WORKSTATIONWhen typed at the command prompt, service names of two words or more mustbe enclosed in quotation marks. For example, NET START \"DHCP Client\"starts the DHCP Client service. |
| 0xC54 | |
|
| 0xC55 | SERVICES這個主題沒有選項。這個主題列出可以啟動的一些服務。它並非 NET 命令。 |
SERVICESThere are no options for this topic. This topic is a list ofsome services that can be started. It is not a NET command. |
| 0xC56 | SYNTAX以下表示法用來代表命令語法:- 大寫字母代表必須如實輸入的單字。小寫字母代表 可能會變動的項目名稱，例如，filenames。- [ 與 ] 字元之間為可與命令一併提供的選擇性 項目。- { 與 } 字元之間為項目清單。您必須與命令一併 提供至少一個項目。- | 字元分隔清單中的項目。只有其中一個項目可與 命令一併提供。 例如，在下列語法中，您必須輸入 NET COMMAND， 以及 SWITCH1 或 SWITCH2 兩者擇其一。提供名稱 為選擇性動作。 NET COMMAND [name] {SWITCH1 | SWITCH2}- [...] 字元意謂著您可以重複先前項目。 請以空白來分隔項目。- [,...] 字元意謂著您可以重複先前項目，不過， 您必須以逗號或分號來分隔項目，而非空白。- 在命令提示字元中輸入時，服務名稱若是兩個或以上的單字， 必須包含在引號中。例如，NET START \"COMPUTER BROWSER\" 可啟動電腦的瀏覽器服務。 |
SYNTAXThe following conventions are used to indicate command syntax:- Capital letters represent words that must be typed as shown. Lower- case letters represent names of items that may vary, such as filenames.- The [ and ] characters surround optional items that can be supplied with the command.- The { and } characters surround lists of items. You must supply one of the items with the command.- The | character separates items in a list. Only one of the items can be supplied with the command. For example, in the following syntax, you must type NET COMMAND and either SWITCH1 or SWITCH2. Supplying a name is optional. NET COMMAND [name] {SWITCH1 | SWITCH2}- The [...] characters mean you can repeat the previous item. Separate items with spaces.- The [,...] characters mean you can repeat the previous item, but you must separate items with commas or semicolons, not spaces.- When typed at the command prompt, service names of two words or more must be enclosed in quotation marks. For example, NET START \"COMPUTER BROWSER\" starts the computer browser service. |
| 0xC58 | SYNTAX此主題沒有選項。此主題是有關如何閱讀語法行。它並非 NET 命令。 |
SYNTAXThere are no options for this topic. This topic is about how toread syntax lines. It is not a NET command. |
| 0xC59 | NAMESThe following types of names are used with Windows:Computername A unique name that identifies a computer on the local-area network.Devicename The name by which Windows identifies a disk resource or printer. A disk resource is identified by a drive letter followed by a colon (for example, D:). A printer is identified by a port name followed by a colon (for example, LPT1:).Workgroup A group of computers on the network. Each workgroup has a unique name.Localgroup A group of names in a Workgroup that are granted the same rights.Domain A group of Windows Servers, Windows Workstations and other computers on the network. A domain has a unique name. Usually, you must log on in a domain to gain access to the network. Domains are created and managed with Windows Server.Global group A group of names in a domain that are granted the same rights.Filename The name of a file. Under the file allocation table (FAT) file system, a filename can have as many as eight characters, followed by a period (.) and an extension of as many as three characters. Under NTFS and HPFS, a filename can have as many as 254 characters.Network path A description of the location of a shared resource, consisting of a computer's computername followed by the sharename of the resource. The computername is preceded by two backslashes, and the sharename is preceded by one backslash (for example, \\\\SERVER1\\RESOURCE).Path The location of a directory. A path can consist of a devicename and one or more directory names. A backslash (\\) precedes each directory name (for example, C:\\CUSTOMER\\CORP\\ACCT).Pathname A path and a filename. The filename is preceded by a backslash (\\) (for example, C:\\CUSTOMER\\CORP\\REPORT.DOC).Sharename A name that identifies a shared resource on a computer. A sharename is used with the computer's computername to form a network path (as in \\\\SERVER\\RESOURCE).Username The name a person supplies when logging on at a computer.To view these definitions one screen at a time, type NET HELP NAMES | MORE. |
NAMESThe following types of names are used with Windows:Computername A unique name that identifies a computer on the local-area network.Devicename The name by which Windows identifies a disk resource or printer. A disk resource is identified by a drive letter followed by a colon (for example, D:). A printer is identified by a port name followed by a colon (for example, LPT1:).Workgroup A group of computers on the network. Each workgroup has a unique name.Localgroup A group of names in a Workgroup that are granted the same rights.Domain A group of Windows Servers, Windows Workstations and other computers on the network. A domain has a unique name. Usually, you must log on in a domain to gain access to the network. Domains are created and managed with Windows Server.Global group A group of names in a domain that are granted the same rights.Filename The name of a file. Under the file allocation table (FAT) file system, a filename can have as many as eight characters, followed by a period (.) and an extension of as many as three characters. Under NTFS and HPFS, a filename can have as many as 254 characters.Network path A description of the location of a shared resource, consisting of a computer's computername followed by the sharename of the resource. The computername is preceded by two backslashes, and the sharename is preceded by one backslash (for example, \\\\SERVER1\\RESOURCE).Path The location of a directory. A path can consist of a devicename and one or more directory names. A backslash (\\) precedes each directory name (for example, C:\\CUSTOMER\\CORP\\ACCT).Pathname A path and a filename. The filename is preceded by a backslash (\\) (for example, C:\\CUSTOMER\\CORP\\REPORT.DOC).Sharename A name that identifies a shared resource on a computer. A sharename is used with the computer's computername to form a network path (as in \\\\SERVER\\RESOURCE).Username The name a person supplies when logging on at a computer.To view these definitions one screen at a time, type NET HELP NAMES | MORE. |
| 0xC5B | NAMES此主題沒有選項。此說明主題是有關Windows 所使用的各種名稱類型。它並非 NET 命令。 |
NAMESThere are no options for this topic. This is a help topic about thedifferent types of names Windows uses. It is not a NET command. |
| 0xC5C | 如需工具的詳細資訊，請參閱線上說明中的命令列參照。 |
For more information on tools see the command-line reference in the online help. |
| 0xC5D | CONTINUE: CONT$FILE: FILES$GROUP: GROUPS$REPLICATOR: REPL, REPLICATOR$SESSION: SESSIONS, SESS$STATISTICS: STATS$USER: USERS$WORKSTATION: REDIRECTOR, REDIR, RDR, WORK, WKSTA, PRDR, DEVRDR$SERVER: SVR, SRV$ |
CONTINUE: CONT$FILE: FILES$GROUP: GROUPS$REPLICATOR: REPL, REPLICATOR$SESSION: SESSIONS, SESS$STATISTICS: STATS$USER: USERS$WORKSTATION: REDIRECTOR, REDIR, RDR, WORK, WKSTA, PRDR, DEVRDR$SERVER: SVR, SRV$ |
| 0xC5E | NAMES$SYNTAX$SERVICES$ |
NAMES$SYNTAX$SERVICES$ |