| 1 | 1.0 |
1.0 |
| 2 | ODBC CIM 공급자에 대 한 키-값 쌍입니다. |
Key-value pair for ODBC CIM providers. |
| 3 | ODBC 드라이버의 이름입니다. |
Name of an ODBC driver. |
| 4 | '32-bit' 또는 '64-bit'입니다. |
Either '32-bit' or '64-bit'. |
| 5 | ODBC 드라이버의 키-값 쌍입니다. |
Key-value pairs of the ODBC driver. |
| 6 | ODBC 드라이버 인스턴스 공급자입니다. |
ODBC Driver Instance Provider. |
| 7 | 시스템에 설치된 하나 이상의 ODBC 드라이버를 검색합니다. |
Retrieves one or more installed ODBC drivers from the system. |
| 8 | 하나 이상의 ODBC 드라이버를 드라이버 이름으로 지정합니다. 와일드카드 문자를 사용할 수 있습니다. 기본값은 모든 ODBC 드라이버를 반환하는 것입니다. |
Specifies one or more ODBC drivers by driver name. You can use wildcard characters. The default is to return all ODBC drivers. |
| 9 | ODBC 드라이버의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 'All'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC driver. Possible values are '32-bit', '64-bit' or 'All'. The default is 'All'. This is the platform architecture on the remote machine if this command is executed in a remote CIM session. |
| 10 | 출력은 MSFT_OdbcDriver 형식의 CIM 개체의 배열이며 각각은 ODBC 드라이버를 나타냅니다. |
The output is an array of CIM objects of type MSFT_OdbcDriver, each of which represents an ODBC driver. |
| 11 | 설치된 하나 이상의 ODBC 드라이버에 대해 드라이버 속성을 구성합니다. |
Configure driver\'s properties for one or more installed ODBC drivers. |
| 12 | 이 cmdlet에서 생성된 개체를 파이프라인을 통해 전달합니다. 기본적으로 이 cmdlet은 파이프라인을 통해 아무 개체도 전달하지 않습니다. |
Passes the object created by this cmdlet through the pipeline. By default, this cmdlet does not pass any objects through the pipeline. |
| 13 | 수정하거나 추가할 ODBC 드라이버의 속성 값을 지정합니다. 문자열 배열 형식이며 각 문자열은 =입니다. |
Specifies the property values of the ODBC driver to be modified or added. Format as an array of strings where each string is: =. |
| 14 | 삭제할 ODBC 드라이버의 속성 값을 지정합니다. 제거할 키의 배열입니다. |
Specifies the property values of the ODBC driver to be deleted. This is an array of keys to be removed. |
| 15 | 지정된 ODBC 드라이버 개체가 나타내는 ODBC 드라이버 개체를 수정합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Modifies the ODBC driver represented by the specified ODBC driver objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 16 | 하나 이상의 ODBC 드라이버를 드라이버 이름으로 지정합니다. 와일드카드 문자를 사용할 수 있습니다. |
Specifies one or more ODBC drivers by driver name. You can use wildcard characters. |
| 17 | ODBC 드라이버의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC driver. Possible values are '32-bit', '64-bit' or 'All'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed in a remote CIM session. |
| 18 | ODBC 드라이버의 작업 공급자입니다. |
Task provider for ODBC driver. |
| 19 | ODBC DSN의 이름입니다. |
Name of an ODBC DSN. |
| 20 | 'User' 또는 'System'입니다. |
Either 'User' or 'System'. |
| 21 | '32-bit', '64-bit', '32/64-bit', 'Unknown Platform' 중 하나입니다. |
One of '32-bit', '64-bit', '32/64-bit' or 'Unknown Platform'. |
| 22 | 이 DSN에 대한 ODBC 드라이버의 이름입니다. |
The name of the ODBC driver for this DSN. |
| 23 | ODBC DSN의 키-값 쌍입니다. |
Key-value pairs of the ODBC DSN. |
| 24 | ODBC DSN 인스턴스 공급자입니다. |
ODBC DSN Instance Provider. |
| 25 | 시스템에서 하나 이상의 ODBC DSN을 검색합니다. |
Retrieves one or more ODBC DSNs from the system. |
| 26 | 하나 이상의 ODBC DSN을 DSN 이름으로 지정합니다. 와일드카드 문자를 사용할 수 있습니다. 기본값은 모든 ODBC DSN을 반환하는 것입니다. |
Specifies one or more ODBC DSNs by DSN name. You can use wildcard characters. The default is to return all ODBC DSNs. |
| 27 | 지정된 ODBC 드라이버를 사용하는 ODBC DSN만 가져옵니다. 와일드카드 문자를 사용할 수 있습니다. 기본값은 모든 ODBC DSN을 반환하는 것입니다. |
Gets only ODBC DSNs that are using the specified ODBC driver. You can use wildcard characters. The default is to return all ODBC DSNs. |
| 28 | 검색할 ODBC DSN의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 'All'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC DSN to retrieve. Possible values are '32-bit', '64-bit' or 'All'. The default is 'All'. This is the platform architecture on the remote machine if this command is executed in a remote CIM session. |
| 29 | 검색할 ODBC DSN의 유형입니다. 가능한 값은 'User', 'System' 또는 'All'입니다. 기본값은 'All'입니다. |
The type of the ODBC DSN to retrieve. Possible values are 'User', 'System' or 'All'. The default is 'All'. |
| 30 | 출력은 MSFT_OdbcDsn 형식의 CIM 개체의 배열이며 각각은 ODBC DSN을 나타냅니다. |
The output is an array of CIM objects of type MSFT_OdbcDsn, each of which represents an ODBC DSN. |
| 31 | ODBC DSN을 추가합니다. |
Adds an ODBC DSN. |
| 32 | 생성할 ODBC DSN의 이름입니다. 와일드카드 문자를 사용할 수 없습니다. |
The name of the ODBC DSN to create. You cannot use wildcard characters. |
| 33 | 새 ODBC DSN에 대한 ODBC 드라이버의 이름입니다. 와일드카드 문자를 사용할 수 없습니다. |
The name of the ODBC driver for the new ODBC DSN. You cannot use wildcard characters. |
| 34 | 새 ODBC DSN의 속성 값을 지정합니다. 문자열 배열 형식이며 각 문자열은 =입니다. |
Specifies the property values of the new ODBC DSN. Format as an array of strings where each string is: =. |
| 35 | 추가할 ODBC DSN의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit' 또는 '64-bit'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC DSN you are adding. Possible values are '32-bit' or '64-bit'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed in a remote CIM session. |
| 36 | 추가할 ODBC DSN의 유형입니다. 가능한 값은 'User' 또는 'System'입니다. |
The type of the ODBC DSN to add. Possible values are 'User' or 'System'. |
| 37 | 하나 이상의 ODBC DSN을 수정합니다. |
Modifies one or more ODBC DSNs. |
| 38 | 수정하거나 추가할 ODBC DSN의 속성 값을 지정합니다. 문자열 배열 형식이며 각 문자열은 =입니다. |
Specifies the property values of the ODBC DSN that you are modifying or adding. Format as an array of strings where each string is: =. |
| 39 | 삭제할 ODBC DSN의 속성 값을 지정합니다. 제거할 키의 배열입니다. |
Specifies the property values of the ODBC DSN to be deleted. This is an array of keys to be removed. |
| 40 | 지정된 ODBC DSN 개체가 나타내는 ODBC DSN을 수정합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Modifies the ODBC DSNs represented by the specified ODBC DSN objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 41 | 설정할 ODBC DSN의 이름입니다. 와일드카드 문자를 사용할 수 있습니다. |
The name of the ODBC DSN to set. You can use wildcard characters. |
| 42 | 이 cmdlet은 이 드라이버를 사용하는 ODBC DSN만 설정합니다. 와일드카드 문자를 사용할 수 있습니다. 기본값은 모든 ODBC DSN을 설정하는 것입니다. |
This cmdlet will set the ODBC DSN using this driver only. You can use wildcard characters. The default is to set all ODBC DSNs. |
| 43 | 설정할 ODBC DSN의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC DSN to set. Possible values are '32-bit', '64-bit' or 'All'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed in a remote CIM session. |
| 44 | 설정할 ODBC DSN의 유형입니다. 가능한 값은 'User', 'System' 또는 'All'입니다. |
The type of the ODBC DSN to set. Possible values are 'User', 'System' or 'All'. |
| 45 | 시스템에서 하나 이상의 기존 DSN을 제거합니다. |
Removes one or more existing DSNs from the system. |
| 46 | 지정된 ODBC DSN 개체가 나타내는 ODBC DSN을 제거합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Removes the ODBC DSNs represented by the specified ODBC DSN objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 47 | 제거할 하나 이상의 ODBC DSN을 지정합니다. 와일드카드 문자를 사용할 수 있습니다. |
Specifies one or more ODBC DSNs to remove. You can use wildcard characters. |
| 48 | 이 cmdlet은 이 드라이버를 사용하는 ODBC DSN만 제거합니다. 와일드카드 문자를 사용할 수 있습니다. 기본값은 모든 ODBC DSN을 제거하는 것입니다. |
This cmdlet will remove the ODBC DSN using this driver only. You can use wildcard characters. The default is to remove all ODBC DSNs. |
| 49 | 제거할 ODBC DSN의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC DSN to remove. Possible values are '32-bit', '64-bit' or 'All'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed in a remote CIM session. |
| 50 | 제거할 ODBC DSN의 유형입니다. 가능한 값은 'User', 'System' 또는 'All'입니다. |
The type of the ODBC DSN to remove. Possible values are 'User', 'System' or 'All'. |
| 51 | ODBC DSN(데이터 원본 이름)의 작업 공급자입니다. |
Task provider for ODBC Data Source Name (DSN). |
| 52 | ODBC Connection Pooling PerfMon 카운터의 플랫폼 아키텍처입니다. '32-bit' 또는 '64-bit'입니다. |
The platform architecture of the ODBC Connection Pooling PerfMon counters. Either '32-bit' or '64-bit'. |
| 53 | ODBC connection pooling PerfMon 카운터가 활성화된 경우 True입니다. |
True if the ODBC connection pooling PerfMon counters is enabled. |
| 54 | ODBC PerfMon Counters 구성입니다. |
ODBC PerfMon Counters Configuration. |
| 55 | ODBC Connection Pooling 기능의 문제 해결을 위해 ODBC Connection Pooling PerfMon 카운터를 활성화합니다. |
Enables the ODBC Connection Pooling PerfMon counters for troubleshooting ODBC Connection Pooling feature. |
| 56 | 지정된 ODBC PerfMon 카운터 개체가 나타내는 ODBC Connection Pooling PerfMon 카운터를 활성화합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Enables the ODBC Connection Pooling PerfMon counters represented by the specified ODBC PerfMon counters objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 57 | 출력은 MSFT_OdbcPerfCounter 형식의 CIM 개체의 배열이며 각각은 ODBC Performance Counter 설정을 나타냅니다. |
The output is an array of CIM objects of type MSFT_OdbcPerfCounter, each of which represents an ODBC Performance Counter setting. |
| 58 | ODBC Connection Pooling PerfMon 카운터의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC Connection Pooling PerfMon counters. Possible values are '32-bit', '64-bit' or 'All'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed on a remote CIM session. |
| 59 | ODBC Connection Pooling 기능에 대해 ODBC Connection Pooling PerfMon 카운터를 비활성화합니다 |
Disables the ODBC Connection Pooling PerfMon counters for ODBC Connection Pooling feature. |
| 60 | 지정된 ODBC PerfMon 카운터 개체가 나타내는 ODBC Connection Pooling PerfMon 카운터를 비활성화합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Disables the ODBC Connection Pooling PerfMon counters represented by the specified ODBC PerfMon counters objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 61 | 비활성화할 ODBC Connection Pooling PerfMon 카운터의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC Connection Pooling PerfMon counters to disable. Possible values are '32-bit', '64-bit' or 'All'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed on a remote CIM session. |
| 62 | ODBC Connection Pooling 기능에 대한 ODBC Connection Pooling PerfMon 카운터를 검색합니다. |
Retrieves the ODBC Connection Pooling PerfMon counters for ODBC Connection Pooling feature. |
| 63 | 가져올 ODBC Connection Pooling PerfMon 카운터의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 'All'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the ODBC Connection Pooling PerfMon counters to get. Possible values are '32-bit', '64-bit' or 'All'. The default is 'All'. This is the platform architecture on the remote machine if this command is executed on a remote CIM session. |
| 64 | ODBC Connection Pooling PerfMon 카운터 설정의 작업 공급자입니다. |
Task provider for ODBC Connection Pooling PerfMon counters setting. |
| 65 | BidTrace 설정의 플랫폼 아키텍처입니다. '32-bit' 또는 '64-bit'입니다. |
The platform architecture of the BidTrace setting. Either '32-bit' or '64-bit'. |
| 66 | 1(= 전체 경로), 2 (= 폴더), 3 (= 모든 응용 프로그램) 중 하나입니다. |
One of the following: 1 (= Full path); 2 (= Folder); 3 (= All applications). |
| 67 | Mode == 1인 경우 BidTrace 구성의 응용 프로그램 전체 경로이고, Mode==2인 경우 BidTrace 구성의 응용 프로그램 폴더의 전체 경로입니다. Mode == 3인 경우 이 설정은 무시됩니다. |
The full path of applications for the BidTrace configuration (when Mode == 1), or the full path of application folder for the BidTrace configuration (when Mode==2). This is ignored for Mode == 3. |
| 68 | BidTrace 구성의 특정 응용 프로그램에 대한 프로세스 ID입니다. Mode != 1인 경우 이 설정은 무시됩니다. |
The process ID of a particular application for the BidTrace configuration. This is ignored for Mode != 1. |
| 69 | WDAC BidTrace 설정이 활성화된 경우 True입니다. |
True if the WDAC BidTrace setting is enabled. |
| 70 | WDAC BidTrace 설정이 정의된 경우 True입니다. |
True if the WDAC BidTrace setting is defined. |
| 71 | BidTrace 어댑터의 전체 경로입니다. |
The full path of the BidTrace adapter. |
| 72 | WDAC BidTrace 구성입니다. |
WDAC BidTrace Configuration. |
| 73 | WDAC 구성 요소의 문제 해결을 위해 Built-in Diagnostics Tracing(BidTrace)을 활성화합니다. |
Enables Built-in Diagnostics Tracing (BidTrace) for troubleshooting WDAC components. |
| 74 | 모든 응용 프로그램에 대해 BidTrace를 활성화합니다. |
Enable BidTrace for all applications. |
| 75 | WDAC BidTrace 설정의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 32비트 프로세스에서는 '32-bit', 64비트 프로세스에서는 '64-bit'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the WDAC BidTrace setting. Possible values are '32-bit', '64-bit' or 'All'. The default is '32-bit' on a 32-bit process and '64-bit' on a 64-bit process. This is the platform architecture on the remote machine if this command is executed on a remote CIM session. |
| 76 | 출력은 MSFT_WdacBidTrace 형식의 CIM 개체의 배열이며 각각은 WDAC BidTrace 설정을 나타냅니다. |
The output is an array of CIM objects of type MSFT_WdacBidTrace, each of which represents a WDAC BidTrace setting. |
| 77 | 이 폴더의 모든 응용 프로그램에 대해 BidTrace를 활성화합니다. |
Enable BidTrace for all applications under this folder. |
| 78 | 지정된 BidTrace 설정 개체가 나타내는 BidTrace를 활성화합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Enable the BidTrace represented by the specified BidTrace setting objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 79 | 이 응용 프로그램 전체 경로에 대해 BidTrace를 활성화합니다. |
Enable BidTrace for this application full path. |
| 80 | 이 프로세스 ID에 대해서만 BidTrace를 활성화합니다. |
Enable BidTrace only for this process ID. |
| 81 | WDAC 구성 요소의 문제 해결을 위한 Built-in Diagnostics Tracing(BidTrace)을 비활성화합니다. |
Disables Built-in Diagnostics Tracing (BidTrace) for troubleshooting WDAC components. |
| 82 | 모든 응용 프로그램에 대해 BidTrace를 비활성화합니다. |
Disable BidTrace for all applications. |
| 83 | 이 폴더의 모든 응용 프로그램에 대해 BidTrace를 비활성화합니다. |
Disable BidTrace for all applications under this folder. |
| 84 | 지정된 BidTrace 설정 개체가 나타내는 BidTrace를 비활성화합니다. 개체가 포함된 변수를 입력하거나, 개체를 가져오는 명령 또는 식을 입력합니다. |
Disable the BidTrace represented by the specified BidTrace setting objects. Enter a variable that contains the objects, or type a command or expression that gets the objects. |
| 85 | 이 응용 프로그램 전체 경로에 대해 BidTrace를 비활성화합니다. |
Disable BidTrace for this application full path. |
| 86 | 이 프로세스 ID에 대해서만 BidTrace를 비활성화합니다. |
Disable BidTrace only for this process ID. |
| 87 | WDAC 구성 요소의 문제 해결을 위해 Built-in Diagnostics Tracing(BidTrace)을 검색합니다. |
Retrieves Built-in Diagnostics Tracing (BidTrace) for troubleshooting WDAC components. |
| 88 | WDAC BidTrace 설정의 플랫폼 아키텍처입니다. 가능한 값은 '32-bit', '64-bit' 또는 'All'입니다. 기본값은 'All'입니다. 이 명령이 원격 CIM 세션에서 실행되는 경우 원격 컴퓨터의 플랫폼 아키텍처입니다. |
The platform architecture of the WDAC BidTrace setting. Possible values are '32-bit', '64-bit' or 'All'. The default is 'All'. This is the platform architecture on the remote machine if this command is executed on a remote CIM session. |
| 89 | '모든 응용 프로그램'과 연관된 WDAC BidTrace 설정만 가져옵니다. |
Gets only WDAC BidTrace settings that are associated with 'all applications'. |
| 90 | 지정된 폴더와 연관된 WDAC BidTrace 설정만 가져옵니다. 와일드카드 문자를 사용할 수 있습니다. |
Gets only WDAC BidTrace settings that are associated with the specified folder. You can use wildcard characters. |
| 91 | 지정된 응용 프로그램 전체 경로와 연관된 WDAC BidTrace 설정만 가져옵니다. 와일드카드 문자를 사용할 수 있습니다. 기본값은 모든 WDAC BidTrace 설정을 반환하는 것입니다. |
Gets only WDAC BidTrace settings that are associated with the specified application full path. You can use wildcard characters. The default is to return all WDAC BidTrace settings. |
| 92 | 지정된 프로세스 ID와 연관된 WDAC BidTrace 설정만 가져옵니다. PlatformId 매개 변수는 선택 사항입니다.기본값은 모든 WDAC BidTrace 설정을 반환하는 것입니다. |
Gets only WDAC BidTrace settings that are associated with the specified Process ID. The parameter PlatformId is optional. The default is to return all WDAC BidTrace settings. |
| 93 | WDAC 구성 요소의 BidTrace 설정에 대한 작업 공급자입니다. |
Task provider for the BidTrace setting for WDAC components. |
| 4465 | %1!.300s! (설치 관리자 오류 코드: %2!u!). |
%1!.300s! (Installer error code: %2!u!). |
| 4466 | %1!.255s! (32비트 ODBC 드라이버) |
%1!.255s! (32-bit ODBC driver) |
| 4467 | %1!.255s! (64비트 ODBC 드라이버) |
%1!.255s! (64-bit ODBC driver) |
| 4468 | %1!.32s! (32비트 ODBC 사용자 DSN) |
%1!.32s! (32-bit ODBC User DSN) |
| 4469 | %1!.32s! (64비트 ODBC 사용자 DSN) |
%1!.32s! (64-bit ODBC User DSN) |
| 4470 | %1!.32s! (32/64비트 ODBC 사용자 DSN) |
%1!.32s! (32/64-bit ODBC User DSN) |
| 4471 | %1!.32s! (ODBC 사용자 DSN - 알 수 없는 플랫폼) |
%1!.32s! (ODBC User DSN - Unknown Platform) |
| 4472 | %1!.32s! (32비트 ODBC 시스템 DSN) |
%1!.32s! (32-bit ODBC System DSN) |
| 4473 | %1!.32s! (64비트 ODBC 시스템 DSN) |
%1!.32s! (64-bit ODBC System DSN) |
| 4474 | %1!.32s! (ODBC 시스템 DSN - 알 수 없는 플랫폼) |
%1!.32s! (ODBC System DSN - Unknown Platform) |
| 4475 | 32비트 ODBC Connection Pooling PerfMon 카운터 |
32-bit ODBC Connection Pooling PerfMon Counters |
| 4476 | 64비트 ODBC Connection Pooling PerfMon 카운터 |
64-bit ODBC Connection Pooling PerfMon Counters |
| 4477 | %1!.260s! (32비트 WDAC BidTrace) |
%1!.260s! (32-bit WDAC BidTrace) |
| 4478 | %1!.260s! (64비트 WDAC BidTrace) |
%1!.260s! (64-bit WDAC BidTrace) |
| 10001 | 드라이버를 찾을 수 없습니다. |
Driver cannot be found. |
| 10002 | 지정된 플랫폼에서 드라이버를 찾을 수 없습니다. 자세한 내용은 Platform 매개 변수를 참조하십시오. |
Driver cannot be found under the specified platform. See the parameter Platform for more information. |
| 10003 | 드라이버 이름에 대한 잘못된 와일드카드 패턴입니다. |
Invalid wildcard pattern for driver name. |
| 10004 | 잘못된 드라이버 이름입니다. |
Invalid driver name. |
| 10005 | 액세스 거부: 낮은 권한 사용자는 ODBC 드라이버를 관리할 수 없습니다. ODBC 드라이버를 관리하려면 "관리자 권한으로 실행" 옵션으로 Windows PowerShell을 시작하십시오. |
Access denied: low-privilege user cannot manage ODBC driver. To manage an ODBC driver, start Windows PowerShell with the "Run as administrator" option. |
| 10006 | SetPropertyValue나 RemovePropertyValue가 둘 다 지정되지 않았습니다. |
Neither SetPropertyValue nor RemovePropertyValue is specified. |
| 10007 | SetPropertyValue에 단일 키 {%1!.300s!}이(가) 두 번 이상 나옵니다. |
A single key {%1!.300s!} occurs more than once in SetPropertyValue. |
| 10008 | RemovePropertyValue에 단일 키 {%1!.300s!}이(가) 두 번 이상 나옵니다. |
A single key {%1!.300s!} occurs more than once in RemovePropertyValue. |
| 10009 | SetPropertyValue 및 RemovePropertyValue 둘 다에 단일 키 {%1!.300s!}이(가) 있습니다. |
A single key {%1!.300s!} is present in both SetPropertyValue and RemovePropertyValue. |
| 10010 | 매개 변수 SetPropertyValue {%1!.300s!}에 구문 오류가 있습니다. "MyKey=MyValue" 형식이어야 합니다. |
Syntax error in the parameter SetPropertyValue {%1!.300s!}. It must be in the format "MyKey=MyValue". |
| 10011 | 매개 변수 RemovePropertyValue {%1!.300s!}에 구문 오류가 있습니다. "MyKey" 형식이어야 합니다. |
Syntax error in the parameter RemovePropertyValue {%1!.300s!}. It must be in the format "MyKey". |
| 10012 | {APILevel, ConnectFunctions, Driver, DriverODBCVer, FileUsage, Setup, SQLLevel, UsageCount} 키를 설정 또는 제거하려고 했습니다. 이러한 키는 드라이버 설치 프로그램으로만 수정할 수 있습니다. |
Attempt to set or remove the following keys: {APILevel, ConnectFunctions, Driver, DriverODBCVer, FileUsage, Setup, SQLLevel, UsageCount}. These keys should only be modified by driver setup program. |
| 10013 | 존재하지 않는 키 {%1!.300s!}을(를) 제거하려고 했습니다. |
Attempt to remove a non-existant key {%1!.300s!}. |
| 10014 | 드라이버 이름 매개 변수가 없습니다. |
The driver name parameter is missing. |
| 20001 | DSN을 찾을 수 없습니다. |
DSN cannot be found. |
| 20002 | 지정된 플랫폼에서 시스템 DSN을 찾을 수 없습니다. 자세한 내용은 Platform 매개 변수를 참조하십시오. |
System DSN cannot be found under the specified platform. See the parameter Platform for more information. |
| 20003 | 검색 조건과 일치하는 DSN이 없습니다. Name, DsnType 또는 Platform 매개 변수를 사용하여 검색 조건을 구체화하십시오. |
No DSN matches the search criteria. Refine your criteria with parameters: Name, DsnType or Platform. |
| 20004 | 시스템 DSN {%1!.300s!}을(를) 찾을 수 없습니다. 자세한 내용은 DsnType 매개 변수를 참조하십시오. |
System DSN {%1!.300s!} cannot be found. See the parameter DsnType for more information. |
| 20005 | 사용자 DSN {%1!.300s!}을(를) 찾을 수 없습니다. 자세한 내용은 DsnType 매개 변수를 참조하십시오. |
User DSN {%1!.300s!} cannot be found. See the parameter DsnType for more information. |
| 20006 | DSN 이름이 잘못되었습니다. |
Invalid DSN name. |
| 20007 | DSN 유형이 잘못되었습니다. 가능한 값은 "User" 또는 "System"입니다. |
Invalid DSN type. It can either be "User" or "System". |
| 20008 | DSN 이름에 대한 잘못된 와일드카드 패턴입니다. |
Invalid wildcard pattern for DSN name. |
| 20009 | DSN의 {Driver} 키를 설정 또는 제거하려고 했습니다. DSN을 다른 드라이버로 마이그레이션하려면 Remove-OdbcDsn 및 Add-OdbcDsn을 사용하십시오. |
Attempt to set or remove the {Driver} key of DSN. Use Remove-OdbcDsn and Add-OdbcDsn to migrate a DSN to a different driver. |
| 20010 | DSN의 {UID 또는 PWD} 키를 설정하려고 했습니다. 이러한 키는 보안상의 이유로 레지스트리에 저장할 수 없습니다. 런타임에 SQLDriverConnect, SQLConnect 또는 SQLBrowseConnect를 통해 자격 증명 정보를 제공하십시오. |
Attempt to set the {UID or PWD} key of a DSN. These keys should not be stored in the registry for security reason. Provide the credential information at runtime via SQLDriverConnect, SQLConnect or SQLBrowseConnect. |
| 20011 | 액세스 거부: 낮은 권한 사용자는 ODBC 시스템 DSN을 관리할 수 없습니다. ODBC 시스템 DSN을 관리하려면 "관리자 권한으로 실행" 옵션으로 Windows PowerShell을 시작하십시오. |
Access denied: low-privilege user cannot manage an ODBC System DSN. To manage an ODBC System DSN, start Windows PowerShell with the "Run as administrator" option. |
| 20012 | {%1!.300s!} 드라이버가 설치되지 않았습니다. |
The driver {%1!.300s!} is not installed. |
| 20013 | 지정된 플랫폼에서 {%1!.300s!} 드라이버를 찾을 수 없습니다. 자세한 내용은 Platform 매개 변수를 참조하십시오. |
The driver {%1!.300s!} cannot be found under the specified platform. See the parameter Platform for more information. |
| 20014 | DSN의 레지스트리 항목이 잘못되었습니다. 레지스트리를 확인하고 cmdlet을 다시 호출하십시오. |
The registry entry for the DSN is invalid. Verify the registry and call the cmdlet again. |
| 20015 | DSN이 이미 있습니다. |
The DSN exists already |
| 20016 | DSN의 드라이버가 제거되었습니다. DSN을 제거만 할 수 있습니다. |
The driver of the DSN was uninstalled. The DSN can only be removed. |
| 20017 | DSN 이름 매개 변수가 없습니다. |
The DSN name parameter is missing. |
| 20018 | DSN의 드라이버가 제거되었습니다. 이 cmdlet의 "Name" 매개 변수 집합으로만 DSN을 제거할 수 있습니다. |
The driver of the DSN was uninstalled. The DSN can only be removed by the "Name" parameter set of this cmdlet. |
| 30001 | 액세스 거부: 낮은 권한 사용자는 ODBC Connection Pooling PerfMon 카운터를 활성화/비활성화할 수 없습니다. ODBC Connection Pooling PerfMon 카운터를 활성화/비활성화하려면 "관리자 권한으로 실행" 옵션으로 Windows PowerShell을 시작하십시오. |
Access denied: low-privilege user cannot enable/disable ODBC Connection Pooling PerfMon counters. To enable/disable ODBC Connection Pooling PerfMon counters, start Windows PowerShell with the "Run as administrator" option. |
| 30002 | 레지스트리에 쓸 수 없습니다. |
Cannot write to the registry. |
| 30003 | 필요한 임시 파일을 만들거나 쓸 수 없습니다. |
Cannot create/write the necessary temporary file. |
| 30004 | ODBC Connection Pooling PerfMon 카운터를 로드할 수 없습니다. |
Cannot load the ODBC Connection Pooling PerfMon counters. |
| 30005 | ODBC Connection Pooling PerfMon 카운터를 언로드할 수 없습니다. |
Cannot unload the ODBC Connection Pooling PerfMon counters. |
| 40001 | 시스템에서 응용 프로그램을 찾을 수 없습니다. |
Cannot find the application on the system. |
| 40002 | 시스템에서 폴더를 찾을 수 없습니다. |
Cannot find the folder on the system. |
| 40003 | 프로세스 ID가 잘못되었습니다. |
Invalid Process ID. |
| 40004 | BidTrace 구성 설정을 찾을 수 없습니다. |
BidTrace configuration setting cannot be found. |
| 40005 | 액세스 거부: 낮은 권한 사용자는 BidTrace 설정을 관리할 수 없습니다. BidTrace 설정을 관리하려면 "관리자 권한으로 실행" 옵션으로 Windows PowerShell을 시작하십시오. |
Access denied: low-privilege user cannot manage BidTrace setting. To manage BidTrace setting, start Windows PowerShell with the "Run as administrator" option. |
| 40006 | Path 또는 Folder 매개 변수가 너무 깁니다. |
The Path or the Folder parameter is too long. |
| 40007 | scope mode BidTrace 설정이 잘못되었습니다. |
The scope mode of the BidTrace setting is invalid. |
| 40008 | Path 또는 Folder 매개 변수에 대한 잘못된 와일드카드 패턴입니다. |
Invalid wildcard pattern for Path or Folder parameter. |
| 40009 | 와일드카드를 사용할 수 없습니다. |
Wildcard is not allowed. |
| 40010 | Path 또는 Folder 매개 변수가 없습니다. |
The Path or the Folder parameter is missing. |
| 50001 | 메모리가 부족합니다. |
Out of memory. |
| 50002 | Platform 값이 잘못되었습니다. 가능한 값은 "32-bit" 또는 "64-bit"입니다. |
Invalid Platform value. It can either be "32-bit" or "64-bit". |
| 50003 | Platform 값이 잘못되었습니다. 가능한 값은 "32-bit", "64-bit" 또는 "All"입니다. |
Invalid Platform value. It can either be "32-bit", "64-bit" or "All". |
| 50004 | 입력 개체가 잘못되었습니다. |
Invalid input object. |
| 50005 | 버퍼가 부족합니다. |
Insufficient buffer. |
| 50006 | 다른 동시 작업이 끝나기를 기다리는 동안 시간이 초과되었습니다. |
Timeout when waiting for another concurrent operation to complete. |
| 60001 | 레지스트리 키 {%1!.300s!}에 지원되지 않는 형식의 값 {%2!.300s!}이(가) 포함되어 있습니다. 해당 키를 건너뜁니다. |
Registry key {%1!.300s!} contains a value {%2!.300s!} of unsupported type. Skipping the key. |
| 60002 | 레지스트리 값 이름 {%1!.300s!}이(가) 너무 깁니다. 대상 {%2!.300s!}을(를) 건너뜁니다. |
Registry value name {%1!.300s!} is too long. Skipping the target {%2!.300s!}. |
| 60003 | 레지스트리 값 데이터 {%1!.300s!}이(가) 너무 깁니다. 레지스트리 값 {%2!.300s!}을(를) 건너뜁니다. |
Registry value data {%1!.300s!} is too long. Skipping the registry value {%2!.300s!}. |
| 60004 | 레지스트리 값 이름 {%1!.300s!}이(가) 잘못되었습니다. 대상 {%2!.300s!}을(를) 건너뜁니다. |
Invalid registry value name {%1!.300s!}. Skipping the target {%2!.300s!}. |
| 60006 | DSN 이름이 잘못되었습니다. 대상 {%1!.300s!}을(를) 건너뜁니다. |
Invalid DSN name. Skipping the target {%1!.300s!}. |
| 60007 | 드라이버 이름이 잘못되었습니다. 대상 {%1!.300s!}을(를) 건너뜁니다. |
Invalid driver name. Skipping the target {%1!.300s!}. |
| 60008 | DSN에 너무 많은 계층이 포함되어 있습니다. 대상 {%1!.300s!}을(를) 건너뜁니다. |
The DSN contains too many hierarchies. Skipping the target {%1!.300s!}. |
| 60009 | 레지스트리가 손상되었습니다. 레지스트리를 확인하고 cmdlet을 다시 호출하십시오. 대상 {%1!.300s!}을(를) 건너뜁니다. |
Registry is corrupt. Verify the registry and call the cmdlet again. Skipping the target {%1!.300s!}. |
| 60010 | Path 또는 Folder 매개 변수가 너무 깁니다. 대상 {%1!.300s!}을(를) 건너뜁니다. |
The Path or the Folder parameter is too long. Skipping the target {%1!.300s!}. |