280 | DDE channel not fully closed; awaiting response from the other application. |
DDE channel not fully closed; awaiting response from the other application. |
281 | No more DDE channels are available. |
No more DDE channels are available. |
282 | Cannot open DDE channel; |9 could not find the specified application and topic. |
Cannot open DDE channel; |9 could not find the specified application and topic. |
283 | Cannot open DDE channel; more than one application responded. |
Cannot open DDE channel; more than one application responded. |
284 | DDE channel is locked. |
DDE channel is locked. |
285 | The other application will not perform the DDE method or operation you attempted. |
The other application will not perform the DDE method or operation you attempted. |
286 | Timeout while waiting for DDE response. |
Timeout while waiting for DDE response. |
287 | Operation terminated because Esc key was pressed before completion. |
Operation terminated because Esc key was pressed before completion. |
288 | The other application is busy. |
The other application is busy. |
289 | Data not provided when requested in DDE operation. |
Data not provided when requested in DDE operation. |
290 | Data supplied in a DDE conversation is in the wrong format. |
Data supplied in a DDE conversation is in the wrong format. |
291 | The other application quit. |
The other application quit. |
292 | DDE conversation closed or changed. |
DDE conversation closed or changed. |
293 | DDE method invoked with no channel open. |
DDE method invoked with no channel open. |
294 | Invalid link format; cannot create link to the other application. |
Invalid link format; cannot create link to the other application. |
295 | Message queue filled; DDE message lost. |
Message queue filled; DDE message lost. |
296 | PasteLink already performed on this control. |
PasteLink already performed on this control. |
297 | Cannot set LinkMode; invalid LinkTopic. |
Cannot set LinkMode; invalid LinkTopic. |
298 | The DDE transaction failed. Check to ensure you have the correct version of DDEML.DLL. |
The DDE transaction failed. Check to ensure you have the correct version of DDEML.DLL. |
2000 | Not enough memory to start Cue Cards. |
Not enough memory to start Cue Cards. |
2001 | Operation cancelled. |
Operation cancelled. |
2002 | Not Yet Implemented. |
Not Yet Implemented. |
2003 | | Not Yet Implemented. |
| Not Yet Implemented. |
2004 | System resource exceeded. |
System resource exceeded. |
2005 | Not enough memory to start |9. |
Not enough memory to start |9. |
2006 | Not a valid document name: '|'. |
Not a valid document name: '|'. |
2007 | You already have an open document named '|'; you must close it before you can save or rename another document under the same name. |
You already have an open document named '|'; you must close it before you can save or rename another document under the same name. |
2008 | Document '|' is open; you must close it before deleting it. |
Document '|' is open; you must close it before deleting it. |
2009 | Document '|' is open; you must close it before renaming it. |
Document '|' is open; you must close it before renaming it. |
2010 | Document '|' is open; you must close it before cutting it. |
Document '|' is open; you must close it before cutting it. |
2011 | Not a valid password. |
Not a valid password. |
2012 | This copy of |9 has expired. Please get a new copy from your Microsoft distributor. |
This copy of |9 has expired. Please get a new copy from your Microsoft distributor. |
2013 | This copy of |9 has not been personalized properly. Please reinstall using the provided Setup program. |
This copy of |9 has not been personalized properly. Please reinstall using the provided Setup program. |
2420 | Syntax error in number |
Syntax error in number |
2421 | Syntax error in date |
Syntax error in date |
2422 | Syntax error in string |
Syntax error in string |
2423 | Invalid use of '.', '!', or '()'. |
Invalid use of '.', '!', or '()'. |
2424 | Unknown name |
Unknown name |
2425 | Unknown function name |
Unknown function name |
2426 | Function is not available in expressions |
Function is not available in expressions |
2427 | Object has no value.\ |
Object has no value.\ |
2428 | Invalid arguments used with domain function |
Invalid arguments used with domain function |
2429 | In operator without () |
In operator without () |
2430 | Between operator without And |
Between operator without And |
2431 | Syntax error (missing operator) |
Syntax error (missing operator) |
2432 | Syntax error (comma) |
Syntax error (comma) |
2433 | Syntax error |
Syntax error |
2435 | Extra ) |
Extra ) |
2436 | Missing ), ], or Item |
Missing ), ], or Item |
2437 | Invalid use of vertical bars |
Invalid use of vertical bars |
2439 | Wrong number of arguments used with function |
Wrong number of arguments used with function |
2440 | IIF function without () |
IIF function without () |
2442 | Invalid use of parentheses |
Invalid use of parentheses |
2443 | Invalid use of Is operator |
Invalid use of Is operator |
2445 | Expression too complex |
Expression too complex |
2446 | Out of memory during calculation |
Out of memory during calculation |
2448 | Cannot set value. |
Cannot set value. |
2449 | Syntax error. |
Syntax error. |
2450 | Expression cannot be used with the LIKE predicate. |
Expression cannot be used with the LIKE predicate. |
2451 | Malformed GUID. |
Malformed GUID. |
2452 | Ambiguous name. |
Ambiguous name. |
2453 | Compile error. |
Compile error. |
3000 | Reserved error (|); there is no message for this error. |
Reserved error (|); there is no message for this error. |
3001 | Invalid argument. |
Invalid argument. |
3002 | Could not start session. |
Could not start session. |
3003 | Could not start transaction; too many transactions already nested. |
Could not start transaction; too many transactions already nested. |
3004 | ********** |
********** |
3005 | '|' is not a valid database name. |
'|' is not a valid database name. |
3006 | Database '|' is exclusively locked. |
Database '|' is exclusively locked. |
3007 | Cannot open library database '|'. |
Cannot open library database '|'. |
3008 | The table '|' is already opened exclusively by another user, or it is already open through the user interface and cannot be manipulated programmatically. |
The table '|' is already opened exclusively by another user, or it is already open through the user interface and cannot be manipulated programmatically. |
3009 | You tried to lock table '|' while opening it, but the table cannot be locked because it is currently in use. Wait a moment, and then try the operation again. |
You tried to lock table '|' while opening it, but the table cannot be locked because it is currently in use. Wait a moment, and then try the operation again. |
3010 | Table '|' already exists. |
Table '|' already exists. |
3011 | The Microsoft Jet database engine could not find the object '|'. Make sure the object exists and that you spell its name and the path name correctly. |
The Microsoft Jet database engine could not find the object '|'. Make sure the object exists and that you spell its name and the path name correctly. |
3012 | Object '|' already exists. |
Object '|' already exists. |
3013 | Could not rename installable ISAM file. |
Could not rename installable ISAM file. |
3014 | Cannot open any more tables. |
Cannot open any more tables. |
3015 | Index not found. |
Index not found. |
3016 | Field will not fit in record. |
Field will not fit in record. |
3017 | The size of a field is too long. |
The size of a field is too long. |
3018 | Could not find field. |
Could not find field. |
3019 | Operation invalid without a current index. |
Operation invalid without a current index. |
3020 | Update or CancelUpdate without AddNew or Edit. |
Update or CancelUpdate without AddNew or Edit. |
3021 | No current record. |
No current record. |
3022 | The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. |
The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. |
3023 | AddNew or Edit already used. |
AddNew or Edit already used. |
3024 | Could not find file '|'. |
Could not find file '|'. |
3025 | Cannot open any more files. |
Cannot open any more files. |
3026 | Not enough space on disk. |
Not enough space on disk. |
3027 | Cannot update. Database or object is read-only. |
Cannot update. Database or object is read-only. |
3028 | Cannot start your application. The workgroup information file is missing or opened exclusively by another user. |
Cannot start your application. The workgroup information file is missing or opened exclusively by another user. |
3029 | Not a valid account name or password. |
Not a valid account name or password. |
3030 | '|' is not a valid account name. |
'|' is not a valid account name. |
3032 | Cannot perform this operation. |
Cannot perform this operation. |
3033 | You do not have the necessary permissions to use the '|' object. Have your system administrator or the person who created this object establish the appropriate permissions for you. |
You do not have the necessary permissions to use the '|' object. Have your system administrator or the person who created this object establish the appropriate permissions for you. |
3034 | You tried to commit or rollback a transaction without first beginning a transaction. |
You tried to commit or rollback a transaction without first beginning a transaction. |
3036 | Database has reached maximum size. |
Database has reached maximum size. |
3037 | Cannot open any more tables or queries. |
Cannot open any more tables or queries. |
3039 | Could not create index; too many indexes already defined. |
Could not create index; too many indexes already defined. |
3040 | Disk I/O error during read. |
Disk I/O error during read. |
3041 | Cannot open a database created with a previous version of your application. |
Cannot open a database created with a previous version of your application. |
3042 | Out of MS-DOS file handles. |
Out of MS-DOS file handles. |
3043 | Disk or network error. |
Disk or network error. |
3044 | '|' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. |
'|' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. |
3045 | Could not use '|'; file already in use. |
Could not use '|'; file already in use. |
3046 | Could not save; currently locked by another user. |
Could not save; currently locked by another user. |
3047 | Record is too large. |
Record is too large. |
3048 | Cannot open any more databases. |
Cannot open any more databases. |
3049 | Cannot open database '|'. It may not be a database that your application recognizes, or the file may be corrupt. |
Cannot open database '|'. It may not be a database that your application recognizes, or the file may be corrupt. |
3050 | Could not lock file. |
Could not lock file. |
3051 | The Microsoft Jet database engine cannot open the file '|'. It is already opened exclusively by another user, or you need permission to view its data. |
The Microsoft Jet database engine cannot open the file '|'. It is already opened exclusively by another user, or you need permission to view its data. |
3052 | File sharing lock count exceeded. Increase MaxLocksPerFile registry entry. |
File sharing lock count exceeded. Increase MaxLocksPerFile registry entry. |
3053 | Too many client tasks. |
Too many client tasks. |
3054 | Too many Memo, OLE, or Hyperlink Object fields. |
Too many Memo, OLE, or Hyperlink Object fields. |
3055 | Not a valid file name. |
Not a valid file name. |
3056 | Could not repair this database. |
Could not repair this database. |
3057 | Operation not supported on linked tables. |
Operation not supported on linked tables. |
3058 | Index or primary key cannot contain a Null value. |
Index or primary key cannot contain a Null value. |
3059 | Operation canceled by user. |
Operation canceled by user. |
3060 | Wrong data type for parameter '|'. |
Wrong data type for parameter '|'. |
3061 | Too few parameters. Expected |. |
Too few parameters. Expected |. |
3062 | Duplicate output alias '|'. |
Duplicate output alias '|'. |
3063 | Duplicate output destination '|'. |
Duplicate output destination '|'. |
3064 | Cannot open action query '|'. |
Cannot open action query '|'. |
3065 | Cannot execute a select query. |
Cannot execute a select query. |
3066 | Query must have at least one destination field. |
Query must have at least one destination field. |
3067 | Query input must contain at least one table or query. |
Query input must contain at least one table or query. |
3068 | Not a valid alias name. |
Not a valid alias name. |
3069 | The action query '|' cannot be used as a row source. |
The action query '|' cannot be used as a row source. |
3070 | The Microsoft Jet database engine does not recognize '|' as a valid field name or expression. |
The Microsoft Jet database engine does not recognize '|' as a valid field name or expression. |
3071 | This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables. |
This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables. |
3072 | | |
| |
3073 | Operation must use an updateable query. |
Operation must use an updateable query. |
3074 | Cannot repeat table name '|' in FROM clause. |
Cannot repeat table name '|' in FROM clause. |
3075 | |1 in query expression '|2'. |
|1 in query expression '|2'. |
3076 | | in criteria expression. |
| in criteria expression. |
3077 | | in expression. |
| in expression. |
3078 | The Microsoft Jet database engine cannot find the input table or query '|'. Make sure it exists and that its name is spelled correctly. |
The Microsoft Jet database engine cannot find the input table or query '|'. Make sure it exists and that its name is spelled correctly. |
3079 | The specified field '|' could refer to more than one table listed in the FROM clause of your SQL statement. |
The specified field '|' could refer to more than one table listed in the FROM clause of your SQL statement. |
3080 | Joined table '|' not listed in FROM clause. |
Joined table '|' not listed in FROM clause. |
3081 | Cannot join more than one table with the same name (|). |
Cannot join more than one table with the same name (|). |
3082 | JOIN operation '|' refers to a field that is not in one of the joined tables. |
JOIN operation '|' refers to a field that is not in one of the joined tables. |
3083 | Cannot use internal report query. |
Cannot use internal report query. |
3084 | Cannot insert data with action query. |
Cannot insert data with action query. |
3085 | Undefined function '|' in expression. |
Undefined function '|' in expression. |
3086 | Could not delete from specified tables. |
Could not delete from specified tables. |
3087 | Too many expressions in GROUP BY clause. |
Too many expressions in GROUP BY clause. |
3088 | Too many expressions in ORDER BY clause. |
Too many expressions in ORDER BY clause. |
3089 | Too many expressions in DISTINCT output. |
Too many expressions in DISTINCT output. |
3090 | Resultant table not allowed to have more than one AutoNumber field. |
Resultant table not allowed to have more than one AutoNumber field. |
3091 | HAVING clause (|) without grouping or aggregation. |
HAVING clause (|) without grouping or aggregation. |
3092 | Cannot use HAVING clause in TRANSFORM statement. |
Cannot use HAVING clause in TRANSFORM statement. |
3093 | ORDER BY clause (|) conflicts with DISTINCT. |
ORDER BY clause (|) conflicts with DISTINCT. |
3094 | ORDER BY clause (|) conflicts with GROUP BY clause. |
ORDER BY clause (|) conflicts with GROUP BY clause. |
3095 | Cannot have aggregate function in expression (|). |
Cannot have aggregate function in expression (|). |
3096 | Cannot have aggregate function in WHERE clause (|). |
Cannot have aggregate function in WHERE clause (|). |
3097 | Cannot have aggregate function in ORDER BY clause (|). |
Cannot have aggregate function in ORDER BY clause (|). |
3098 | Cannot have aggregate function in GROUP BY clause (|). |
Cannot have aggregate function in GROUP BY clause (|). |
3099 | Cannot have aggregate function in JOIN operation (|). |
Cannot have aggregate function in JOIN operation (|). |
3100 | Cannot set field '|' in join key to Null. |
Cannot set field '|' in join key to Null. |
3101 | The Microsoft Jet database engine cannot find a record in the table '|2' with key matching field(s) '|1'. |
The Microsoft Jet database engine cannot find a record in the table '|2' with key matching field(s) '|1'. |
3102 | Circular reference caused by '|'. |
Circular reference caused by '|'. |
3103 | Circular reference caused by alias '|' in query definition's SELECT list. |
Circular reference caused by alias '|' in query definition's SELECT list. |
3104 | Cannot specify fixed column heading '|' in a crosstab query more than once. |
Cannot specify fixed column heading '|' in a crosstab query more than once. |
3105 | Missing destination field name in SELECT INTO statement (|). |
Missing destination field name in SELECT INTO statement (|). |
3106 | Missing destination field name in UPDATE statement (|). |
Missing destination field name in UPDATE statement (|). |
3107 | Record(s) cannot be added; no insert permission on '|'. |
Record(s) cannot be added; no insert permission on '|'. |
3108 | Record(s) cannot be edited; no update permission on '|'. |
Record(s) cannot be edited; no update permission on '|'. |
3109 | Record(s) cannot be deleted; no delete permission on '|'. |
Record(s) cannot be deleted; no delete permission on '|'. |
3110 | Could not read definitions; no read definitions permission for table or query '|'. |
Could not read definitions; no read definitions permission for table or query '|'. |
3111 | Could not create; no modify design permission for table or query '|'. |
Could not create; no modify design permission for table or query '|'. |
3112 | Record(s) cannot be read; no read permission on '|'. |
Record(s) cannot be read; no read permission on '|'. |
3113 | Cannot update '|'; field not updateable. |
Cannot update '|'; field not updateable. |
3114 | Cannot include Memo, OLE, or Hyperlink Object when you select unique values (|). |
Cannot include Memo, OLE, or Hyperlink Object when you select unique values (|). |
3115 | Cannot have Memo, OLE, or Hyperlink Object fields in aggregate argument (|). |
Cannot have Memo, OLE, or Hyperlink Object fields in aggregate argument (|). |
3116 | Cannot have Memo, OLE, or Hyperlink Object fields in criteria (|) for aggregate function. |
Cannot have Memo, OLE, or Hyperlink Object fields in criteria (|) for aggregate function. |
3117 | Cannot sort on Memo, OLE, or Hyperlink Object (|). |
Cannot sort on Memo, OLE, or Hyperlink Object (|). |
3118 | Cannot join on Memo, OLE, or Hyperlink Object (|). |
Cannot join on Memo, OLE, or Hyperlink Object (|). |
3119 | Cannot group on Memo, OLE, or Hyperlink Object (|). |
Cannot group on Memo, OLE, or Hyperlink Object (|). |
3120 | Cannot group on fields selected with '*' (|). |
Cannot group on fields selected with '*' (|). |
3121 | Cannot group on fields selected with '*'. |
Cannot group on fields selected with '*'. |
3122 | You tried to execute a query that does not include the specified expression '|' as part of an aggregate function. |
You tried to execute a query that does not include the specified expression '|' as part of an aggregate function. |
3123 | Cannot use '*' in crosstab query. |
Cannot use '*' in crosstab query. |
3124 | Cannot input from internal report query (|). |
Cannot input from internal report query (|). |
3125 | '|' is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long. |
'|' is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long. |
3126 | Invalid bracketing of name '|'. |
Invalid bracketing of name '|'. |
3127 | The INSERT INTO statement contains the following unknown field name: '|'. Make sure you have typed the name correctly, and try the operation again. |
The INSERT INTO statement contains the following unknown field name: '|'. Make sure you have typed the name correctly, and try the operation again. |
3128 | Specify the table containing the records you want to delete. |
Specify the table containing the records you want to delete. |
3129 | Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'. |
Invalid SQL statement; expected 'DELETE', 'INSERT', 'PROCEDURE', 'SELECT', or 'UPDATE'. |
3130 | Syntax error in DELETE statement. |
Syntax error in DELETE statement. |
3131 | Syntax error in FROM clause. |
Syntax error in FROM clause. |
3132 | Syntax error in GROUP BY clause. |
Syntax error in GROUP BY clause. |
3133 | Syntax error in HAVING clause. |
Syntax error in HAVING clause. |
3134 | Syntax error in INSERT INTO statement. |
Syntax error in INSERT INTO statement. |
3135 | Syntax error in JOIN operation. |
Syntax error in JOIN operation. |
3136 | The LEVEL clause includes a reserved word or argument that is misspelled or missing, or the punctuation is incorrect. |
The LEVEL clause includes a reserved word or argument that is misspelled or missing, or the punctuation is incorrect. |
3137 | Missing semicolon (;) at end of SQL statement. |
Missing semicolon (;) at end of SQL statement. |
3138 | Syntax error in ORDER BY clause. |
Syntax error in ORDER BY clause. |
3139 | Syntax error in PARAMETER clause. |
Syntax error in PARAMETER clause. |
3140 | Syntax error in PROCEDURE clause. |
Syntax error in PROCEDURE clause. |
3141 | The SELECT statement includes a reserved word or an argument name that is misspelled or missing, or the punctuation is incorrect. |
The SELECT statement includes a reserved word or an argument name that is misspelled or missing, or the punctuation is incorrect. |
3142 | Characters found after end of SQL statement. |
Characters found after end of SQL statement. |
3143 | Syntax error in TRANSFORM statement. |
Syntax error in TRANSFORM statement. |
3144 | Syntax error in UPDATE statement. |
Syntax error in UPDATE statement. |
3145 | Syntax error in WHERE clause. |
Syntax error in WHERE clause. |
3146 | ODBC--call failed. |
ODBC--call failed. |
3151 | ODBC--connection to '|' failed. |
ODBC--connection to '|' failed. |
3154 | ODBC--could not find DLL '|'. |
ODBC--could not find DLL '|'. |
3155 | ODBC--insert on a linked table '|' failed. |
ODBC--insert on a linked table '|' failed. |
3156 | ODBC--delete on a linked table '|' failed. |
ODBC--delete on a linked table '|' failed. |
3157 | ODBC--update on a linked table '|' failed. |
ODBC--update on a linked table '|' failed. |
3158 | Could not save record; currently locked by another user. |
Could not save record; currently locked by another user. |
3159 | Not a valid bookmark. |
Not a valid bookmark. |
3160 | Table is not open. |
Table is not open. |
3161 | Could not decrypt file. |
Could not decrypt file. |
3162 | You tried to assign the Null value to a variable that is not a Variant data type. |
You tried to assign the Null value to a variable that is not a Variant data type. |
3163 | The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data. |
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data. |
3164 | Field cannot be updated. |
Field cannot be updated. |
3165 | Could not open .inf file. |
Could not open .inf file. |
3166 | Cannot locate the requested Xbase memo file. |
Cannot locate the requested Xbase memo file. |
3167 | Record is deleted. |
Record is deleted. |
3168 | Invalid .inf file. |
Invalid .inf file. |
3169 | The Microsoft Jet database engine could not execute the SQL statement because it contains a field that has an invalid data type. |
The Microsoft Jet database engine could not execute the SQL statement because it contains a field that has an invalid data type. |
3170 | Could not find installable ISAM. |
Could not find installable ISAM. |
3171 | Could not find network path or user name. |
Could not find network path or user name. |
3172 | Could not open Paradox.net. |
Could not open Paradox.net. |
3173 | Could not open table 'MSysAccounts' in the workgroup information file. |
Could not open table 'MSysAccounts' in the workgroup information file. |
3174 | Could not open table 'MSysGroups' in the workgroup information file. |
Could not open table 'MSysGroups' in the workgroup information file. |
3175 | Date is out of range or is in an invalid format. |
Date is out of range or is in an invalid format. |
3176 | Could not open file '|'. |
Could not open file '|'. |
3177 | Not a valid table name. |
Not a valid table name. |
3179 | Encountered unexpected end of file. |
Encountered unexpected end of file. |
3180 | Could not write to file '|'. |
Could not write to file '|'. |
3181 | Invalid range. |
Invalid range. |
3182 | Invalid file format. |
Invalid file format. |
3183 | Not enough space on temporary disk. |
Not enough space on temporary disk. |
3184 | Could not execute query; could not find linked table. |
Could not execute query; could not find linked table. |
3185 | SELECT INTO on a remote database tried to produce too many fields. |
SELECT INTO on a remote database tried to produce too many fields. |
3186 | Could not save; currently locked by user '|2' on machine '|1'. |
Could not save; currently locked by user '|2' on machine '|1'. |
3187 | Could not read; currently locked by user '|2' on machine '|1'. |
Could not read; currently locked by user '|2' on machine '|1'. |
3188 | Could not update; currently locked by another session on this machine. |
Could not update; currently locked by another session on this machine. |
3189 | Table '|1' is exclusively locked by user '|3' on machine '|2'. |
Table '|1' is exclusively locked by user '|3' on machine '|2'. |
3190 | Too many fields defined. |
Too many fields defined. |
3191 | Cannot define field more than once. |
Cannot define field more than once. |
3192 | Could not find output table '|'. |
Could not find output table '|'. |
3193 | (unknown) |
(unknown) |
3195 | (expression) |
(expression) |
3196 | The database '|' is already in use by another person or process. When the database is available, try the operation again. |
The database '|' is already in use by another person or process. When the database is available, try the operation again. |
3197 | The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time. |
The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time. |
3198 | Could not start session. Too many sessions already active. |
Could not start session. Too many sessions already active. |
3199 | Could not find reference. |
Could not find reference. |
3200 | The record cannot be deleted or changed because table '|' includes related records. |
The record cannot be deleted or changed because table '|' includes related records. |
3201 | You cannot add or change a record because a related record is required in table '|'. |
You cannot add or change a record because a related record is required in table '|'. |
3203 | Subqueries cannot be used in the expression (|). |
Subqueries cannot be used in the expression (|). |
3204 | Database already exists. |
Database already exists. |
3205 | Too many crosstab column headers (|). |
Too many crosstab column headers (|). |
3206 | Cannot create a relationship between a field and itself. |
Cannot create a relationship between a field and itself. |
3207 | Operation not supported on a Paradox table with no primary key. |
Operation not supported on a Paradox table with no primary key. |
3208 | Invalid Deleted setting in the Xbase key of the Windows Registry. |
Invalid Deleted setting in the Xbase key of the Windows Registry. |
3210 | The connection string is too long. |
The connection string is too long. |
3211 | The database engine could not lock table '|' because it is already in use by another person or process. |
The database engine could not lock table '|' because it is already in use by another person or process. |
3212 | Could not lock table '|1'; currently in use by user '|3' on machine '|2'. |
Could not lock table '|1'; currently in use by user '|3' on machine '|2'. |
3213 | Invalid Date setting in the Xbase key of the Windows Registry. |
Invalid Date setting in the Xbase key of the Windows Registry. |
3214 | Invalid Mark setting in the Xbase key of the Windows Registry. |
Invalid Mark setting in the Xbase key of the Windows Registry. |
3215 | Too many Btrieve tasks. |
Too many Btrieve tasks. |
3216 | Parameter '|' specified where a table name is required. |
Parameter '|' specified where a table name is required. |
3217 | Parameter '|' specified where a database name is required. |
Parameter '|' specified where a database name is required. |
3218 | Could not update; currently locked. |
Could not update; currently locked. |
3219 | Invalid operation. |
Invalid operation. |
3220 | Incorrect collating sequence. |
Incorrect collating sequence. |
3221 | Invalid settings in the Btrieve key of the Windows Registry. |
Invalid settings in the Btrieve key of the Windows Registry. |
3222 | Query cannot contain a Database parameter. |
Query cannot contain a Database parameter. |
3223 | '|' is invalid because it is too long, or contains invalid characters. |
'|' is invalid because it is too long, or contains invalid characters. |
3224 | Cannot read Btrieve data dictionary. |
Cannot read Btrieve data dictionary. |
3225 | Encountered a record locking deadlock while performing a Btrieve operation. |
Encountered a record locking deadlock while performing a Btrieve operation. |
3226 | Errors encountered while using the Btrieve DLL. |
Errors encountered while using the Btrieve DLL. |
3227 | Invalid Century setting in the Xbase key of the Windows Registry. |
Invalid Century setting in the Xbase key of the Windows Registry. |
3228 | Selected collating sequence not supported by the operating system. |
Selected collating sequence not supported by the operating system. |
3229 | Btrieve--cannot change field. |
Btrieve--cannot change field. |
3230 | Out-of-date Paradox lock file. |
Out-of-date Paradox lock file. |
3231 | ODBC--field would be too long; data truncated. |
ODBC--field would be too long; data truncated. |
3232 | ODBC--could not create table. |
ODBC--could not create table. |
3234 | ODBC--remote query timeout expired. |
ODBC--remote query timeout expired. |
3235 | ODBC--data type not supported on server. |
ODBC--data type not supported on server. |
3238 | ODBC--data out of range. |
ODBC--data out of range. |
3239 | Too many active users. |
Too many active users. |
3240 | Btrieve--missing Btrieve engine. |
Btrieve--missing Btrieve engine. |
3241 | Btrieve--out of resources. |
Btrieve--out of resources. |
3242 | Invalid reference in SELECT statement. |
Invalid reference in SELECT statement. |
3243 | None of the import field names match fields in the appended table. |
None of the import field names match fields in the appended table. |
3244 | Cannot import password-protected spreadsheet. |
Cannot import password-protected spreadsheet. |
3245 | Could not parse field names from the first row of the import table. |
Could not parse field names from the first row of the import table. |
3246 | Operation not supported in transactions. |
Operation not supported in transactions. |
3247 | ODBC--linked table definition has changed. |
ODBC--linked table definition has changed. |
3248 | Invalid NetworkAccess setting in the Windows Registry. |
Invalid NetworkAccess setting in the Windows Registry. |
3249 | Invalid PageTimeout setting in the Windows Registry. |
Invalid PageTimeout setting in the Windows Registry. |
3250 | Could not build key. |
Could not build key. |
3251 | Operation is not supported for this type of object. |
Operation is not supported for this type of object. |
3252 | Cannot open a form whose underlying query contains a user-defined function that attempts to set or get the form's RecordsetClone property. |
Cannot open a form whose underlying query contains a user-defined function that attempts to set or get the form's RecordsetClone property. |
3254 | ODBC--Cannot lock all records. |
ODBC--Cannot lock all records. |
3256 | Index file not found. |
Index file not found. |
3257 | Syntax error in WITH OWNERACCESS OPTION declaration. |
Syntax error in WITH OWNERACCESS OPTION declaration. |
3258 | The SQL statement could not be executed because it contains ambiguous outer joins. To force one of the joins to be performed first, create a separate query that performs the first join and then include that query in your SQL statement. |
The SQL statement could not be executed because it contains ambiguous outer joins. To force one of the joins to be performed first, create a separate query that performs the first join and then include that query in your SQL statement. |
3259 | Invalid field data type. |
Invalid field data type. |
3260 | Could not update; currently locked by user '|2' on machine '|1'. |
Could not update; currently locked by user '|2' on machine '|1'. |
3261 | Table '|' is exclusively locked by user '|2' on machine '|1'. |
Table '|' is exclusively locked by user '|2' on machine '|1'. |
3262 | Could not lock table |
Could not lock table |
3263 | Invalid Database object. |
Invalid Database object. |
3264 | No field defined--cannot append TableDef or Index. |
No field defined--cannot append TableDef or Index. |
3265 | Item not found in this collection. |
Item not found in this collection. |
3266 | Cannot append a Field that is already a part of a Fields collection. |
Cannot append a Field that is already a part of a Fields collection. |
3267 | Property can be set only when the Field is part of a Recordset object's Fields collection. |
Property can be set only when the Field is part of a Recordset object's Fields collection. |
3268 | Cannot set this property once the object is part of a collection. |
Cannot set this property once the object is part of a collection. |
3269 | Cannot append an Index that is already a part of an Indexes collection. |
Cannot append an Index that is already a part of an Indexes collection. |
3270 | Property not found. |
Property not found. |
3271 | Invalid property value. |
Invalid property value. |
3272 | Object is not a collection. |
Object is not a collection. |
3273 | Method not applicable for this object. |
Method not applicable for this object. |
3274 | External table is not in the expected format. |
External table is not in the expected format. |
3275 | Unexpected error from external database driver (|). |
Unexpected error from external database driver (|). |
3276 | Invalid database object reference. |
Invalid database object reference. |
3277 | Cannot have more than 10 fields in an index. |
Cannot have more than 10 fields in an index. |
3278 | The Microsoft Jet database engine has not been initialized. |
The Microsoft Jet database engine has not been initialized. |
3279 | The Microsoft Jet database engine has already been initialized. |
The Microsoft Jet database engine has already been initialized. |
3280 | Cannot delete a field that is part of an index or is needed by the system. |
Cannot delete a field that is part of an index or is needed by the system. |
3281 | Cannot delete this index or table. It is either the current index or is used in a relationship. |
Cannot delete this index or table. It is either the current index or is used in a relationship. |
3282 | Operation not supported on a table that contains data. |
Operation not supported on a table that contains data. |
3283 | Primary key already exists. |
Primary key already exists. |
3284 | Index already exists. |
Index already exists. |
3285 | Invalid index definition. |
Invalid index definition. |
3286 | Format of memo file does not match specified external database format. |
Format of memo file does not match specified external database format. |
3287 | Cannot create index on the given field. |
Cannot create index on the given field. |
3288 | Paradox index is not primary. |
Paradox index is not primary. |
3289 | Syntax error in CONSTRAINT clause. |
Syntax error in CONSTRAINT clause. |
3290 | Syntax error in CREATE TABLE statement. |
Syntax error in CREATE TABLE statement. |
3291 | Syntax error in CREATE INDEX statement. |
Syntax error in CREATE INDEX statement. |
3292 | Syntax error in field definition. |
Syntax error in field definition. |
3293 | Syntax error in ALTER TABLE statement. |
Syntax error in ALTER TABLE statement. |
3294 | Syntax error in DROP INDEX statement. |
Syntax error in DROP INDEX statement. |
3295 | Syntax error in DROP TABLE or DROP INDEX. |
Syntax error in DROP TABLE or DROP INDEX. |
3296 | Join expression not supported. |
Join expression not supported. |
3297 | Could not import table or query. No records found, or all records contain errors. |
Could not import table or query. No records found, or all records contain errors. |
3298 | There are several tables with that name. Please specify owner in the format 'owner.table'. |
There are several tables with that name. Please specify owner in the format 'owner.table'. |
3299 | ODBC Specification Conformance Error (|). Report this error to the developer of your application. |
ODBC Specification Conformance Error (|). Report this error to the developer of your application. |
3300 | Cannot create a relationship. |
Cannot create a relationship. |
3301 | Cannot perform this operation; features in this version are not available in databases with older formats. |
Cannot perform this operation; features in this version are not available in databases with older formats. |
3302 | Cannot change a rule while the rules for this table are in use. |
Cannot change a rule while the rules for this table are in use. |
3303 | Cannot delete this field. It is part of one or more relationships. |
Cannot delete this field. It is part of one or more relationships. |
3304 | You must enter a personal identifier (PID) consisting of at least 4 and no more than 20 characters and digits. |
You must enter a personal identifier (PID) consisting of at least 4 and no more than 20 characters and digits. |
3305 | Invalid connection string in pass-through query. |
Invalid connection string in pass-through query. |
3306 | You have written a subquery that can return more than one field without using the EXISTS reserved word in the main query's FROM clause. Revise the SELECT statement of the subquery to request only one field. |
You have written a subquery that can return more than one field without using the EXISTS reserved word in the main query's FROM clause. Revise the SELECT statement of the subquery to request only one field. |
3307 | The number of columns in the two selected tables or queries of a union query do not match. |
The number of columns in the two selected tables or queries of a union query do not match. |
3308 | Invalid TOP argument in select query. |
Invalid TOP argument in select query. |
3309 | Property value is too large. |
Property value is too large. |
3310 | This property is not supported for external data sources or for databases created with a previous version of Microsoft Jet. |
This property is not supported for external data sources or for databases created with a previous version of Microsoft Jet. |
3311 | Property specified already exists. |
Property specified already exists. |
3312 | Validation rules and default values cannot be placed on system or linked tables. |
Validation rules and default values cannot be placed on system or linked tables. |
3313 | Cannot place this validation expression on this field. |
Cannot place this validation expression on this field. |
3314 | The field '|' cannot contain a Null value because the Required property for this field is set to True. Enter a value in this field. |
The field '|' cannot contain a Null value because the Required property for this field is set to True. Enter a value in this field. |
3315 | Field '|' cannot be a zero-length string. |
Field '|' cannot be a zero-length string. |
3317 | One or more values are prohibited by the validation rule '|2' set for '|1'. Enter a value that the expression for this field can accept. |
One or more values are prohibited by the validation rule '|2' set for '|1'. Enter a value that the expression for this field can accept. |
3318 | Values specified in a TOP clause are not allowed in delete queries or reports. |
Values specified in a TOP clause are not allowed in delete queries or reports. |
3319 | Syntax error in union query. |
Syntax error in union query. |
3320 | | in table-level validation expression. |
| in table-level validation expression. |
3321 | No database specified in connection string or IN clause. |
No database specified in connection string or IN clause. |
3322 | Crosstab query contains one or more invalid fixed column headings. |
Crosstab query contains one or more invalid fixed column headings. |
3323 | The query cannot be used as a row source. |
The query cannot be used as a row source. |
3324 | The query is a DDL query and cannot be used as a row source. |
The query is a DDL query and cannot be used as a row source. |
3325 | Pass-through query with ReturnsRecords property set to True did not return any records. |
Pass-through query with ReturnsRecords property set to True did not return any records. |
3326 | This Recordset is not updateable. |
This Recordset is not updateable. |
3327 | Field '|' is based on an expression and cannot be edited. |
Field '|' is based on an expression and cannot be edited. |
3328 | Table '|2' is read-only. |
Table '|2' is read-only. |
3329 | Record in table '|' was deleted by another user. |
Record in table '|' was deleted by another user. |
3330 | Record in table '|' is locked by another user. |
Record in table '|' is locked by another user. |
3331 | To make changes to this field, first save the record. |
To make changes to this field, first save the record. |
3332 | Cannot enter value into blank field on 'one' side of outer join. |
Cannot enter value into blank field on 'one' side of outer join. |
3333 | Records in table '|' would have no record on the 'one' side. |
Records in table '|' would have no record on the 'one' side. |
3334 | Can be present only in version 1.0 format. |
Can be present only in version 1.0 format. |
3335 | DeleteOnly called with non-zero cbData. |
DeleteOnly called with non-zero cbData. |
3336 | Btrieve: Invalid IndexDDF option in initialization setting. |
Btrieve: Invalid IndexDDF option in initialization setting. |
3337 | Invalid DataCodePage option in initialization setting. |
Invalid DataCodePage option in initialization setting. |
3338 | Btrieve: Xtrieve options are not correct in initialization setting. |
Btrieve: Xtrieve options are not correct in initialization setting. |
3339 | Btrieve: Invalid IndexDeleteRenumber option in initialization setting. |
Btrieve: Invalid IndexDeleteRenumber option in initialization setting. |
3340 | Query '|' is corrupt. |
Query '|' is corrupt. |
3341 | The current field must match the join key '|' in the table that serves as the 'one' side of one-to-many relationship. Enter a record in the 'one' side table with the desired key value, and then make the entry with the desired join key in the 'many-only' table. |
The current field must match the join key '|' in the table that serves as the 'one' side of one-to-many relationship. Enter a record in the 'one' side table with the desired key value, and then make the entry with the desired join key in the 'many-only' table. |
3342 | Invalid Memo, OLE, or Hyperlink Object in subquery '|'. |
Invalid Memo, OLE, or Hyperlink Object in subquery '|'. |
3343 | Unrecognized database format '|'. |
Unrecognized database format '|'. |
3344 | The database engine does not recognize either the field '|1' in a validation expression, or the default value in the table '|2'. |
The database engine does not recognize either the field '|1' in a validation expression, or the default value in the table '|2'. |
3345 | Unknown or invalid field reference '|'. |
Unknown or invalid field reference '|'. |
3346 | Number of query values and destination fields are not the same. |
Number of query values and destination fields are not the same. |
3347 | Cannot add record(s); primary key for table '|' not in recordset. |
Cannot add record(s); primary key for table '|' not in recordset. |
3348 | Cannot add record(s); join key of table '|' not in recordset. |
Cannot add record(s); join key of table '|' not in recordset. |
3349 | Numeric field overflow. |
Numeric field overflow. |
3350 | Object is invalid for operation. |
Object is invalid for operation. |
3351 | The ORDER BY expression (|) includes fields that are not selected by the query. Only those fields requested in the first query can be included in an ORDER BY expression. |
The ORDER BY expression (|) includes fields that are not selected by the query. Only those fields requested in the first query can be included in an ORDER BY expression. |
3352 | No destination field name in INSERT INTO statement (|). |
No destination field name in INSERT INTO statement (|). |
3353 | Btrieve: Cannot find file Field.ddf. |
Btrieve: Cannot find file Field.ddf. |
3354 | At most one record can be returned by this subquery. |
At most one record can be returned by this subquery. |
3355 | Syntax error in default value. |
Syntax error in default value. |
3356 | You attempted to open a database that is already opened exclusively by user '|2' on machine '|1'. Try again when the database is available. |
You attempted to open a database that is already opened exclusively by user '|2' on machine '|1'. Try again when the database is available. |
3357 | This query is not a properly formed data-definition query. |
This query is not a properly formed data-definition query. |
3358 | Cannot open the Microsoft Jet engine workgroup information file. |
Cannot open the Microsoft Jet engine workgroup information file. |
3359 | Pass-through query must contain at least one character. |
Pass-through query must contain at least one character. |
3360 | Query is too complex. |
Query is too complex. |
3361 | Unions not allowed in a subquery. |
Unions not allowed in a subquery. |
3362 | Single-row update/delete affected more than one row of a linked table. Unique index contains duplicate values. |
Single-row update/delete affected more than one row of a linked table. Unique index contains duplicate values. |
3363 | Record(s) cannot be added; no corresponding record on the 'one' side. |
Record(s) cannot be added; no corresponding record on the 'one' side. |
3364 | Cannot use Memo, OLE, or Hyperlink Object field '|' in the SELECT clause of a union query. |
Cannot use Memo, OLE, or Hyperlink Object field '|' in the SELECT clause of a union query. |
3365 | Property value not valid for REMOTE objects. |
Property value not valid for REMOTE objects. |
3366 | Cannot append a relation with no fields defined. |
Cannot append a relation with no fields defined. |
3367 | Cannot append. An object with that name already exists in the collection. |
Cannot append. An object with that name already exists in the collection. |
3368 | Relationship must be on the same number of fields with the same data types. |
Relationship must be on the same number of fields with the same data types. |
3370 | Cannot modify the design of table '|'. It is in a read-only database. |
Cannot modify the design of table '|'. It is in a read-only database. |
3371 | Cannot find table or constraint. |
Cannot find table or constraint. |
3372 | No such index '|2' on table '|1'. |
No such index '|2' on table '|1'. |
3373 | Cannot create relationship. Referenced table '|' does not have a primary key. |
Cannot create relationship. Referenced table '|' does not have a primary key. |
3374 | The specified fields are not uniquely indexed in table '|'. |
The specified fields are not uniquely indexed in table '|'. |
3375 | Table '|1' already has an index named '|2'. |
Table '|1' already has an index named '|2'. |
3376 | Table '|' does not exist. |
Table '|' does not exist. |
3377 | No such relationship '|2' on table '|1'. |
No such relationship '|2' on table '|1'. |
3378 | There is already a relationship named '|' in the current database. |
There is already a relationship named '|' in the current database. |
3379 | Cannot create relationships to enforce referential integrity. Existing data in table '|2' violates referential integrity rules in table '|1'. |
Cannot create relationships to enforce referential integrity. Existing data in table '|2' violates referential integrity rules in table '|1'. |
3380 | Field '|2' already exists in table '|1'. |
Field '|2' already exists in table '|1'. |
3381 | There is no field named '|2' in table '|1'. |
There is no field named '|2' in table '|1'. |
3382 | Size of field '|' is too long. |
Size of field '|' is too long. |
3383 | Cannot delete field '|'. It is part of one or more relationships. |
Cannot delete field '|'. It is part of one or more relationships. |
3384 | Cannot delete a built-in property. |
Cannot delete a built-in property. |
3385 | User-defined properties do not support a Null value. |
User-defined properties do not support a Null value. |
3386 | Property '|' must be set before using this method. |
Property '|' must be set before using this method. |
3387 | Cannot find TEMP directory. |
Cannot find TEMP directory. |
3388 | Unknown function '|2' in validation expression or default value on '|1'. |
Unknown function '|2' in validation expression or default value on '|1'. |
3389 | Query support unavailable. |
Query support unavailable. |
3390 | Account name already exists. |
Account name already exists. |
3391 | An error has occurred. Properties were not saved. |
An error has occurred. Properties were not saved. |
3393 | Cannot perform join, group, sort, or indexed restriction. A value being searched or sorted on is too long. |
Cannot perform join, group, sort, or indexed restriction. A value being searched or sorted on is too long. |
3394 | Cannot save property; property is a schema property. |
Cannot save property; property is a schema property. |
3396 | Cannot perform cascading operation. Since related records exist in table '|', referential integrity rules would be violated. |
Cannot perform cascading operation. Since related records exist in table '|', referential integrity rules would be violated. |
3397 | Cannot perform cascading operation. There must be a related record in table '|'. |
Cannot perform cascading operation. There must be a related record in table '|'. |
3398 | Cannot perform cascading operation. It would result in a null key in table '|'. |
Cannot perform cascading operation. It would result in a null key in table '|'. |
3399 | Cannot perform cascading operation. It would result in a duplicate key in table '|'. |
Cannot perform cascading operation. It would result in a duplicate key in table '|'. |
3400 | Cannot perform cascading operation. It would result in two updates to field '|2' in table '|1'. |
Cannot perform cascading operation. It would result in two updates to field '|2' in table '|1'. |
3401 | Cannot perform cascading operation. It would cause field '|' to become Null, which is not allowed. |
Cannot perform cascading operation. It would cause field '|' to become Null, which is not allowed. |
3402 | Cannot perform cascading operation. It would cause field '|' to become a zero-length string, which is not allowed. |
Cannot perform cascading operation. It would cause field '|' to become a zero-length string, which is not allowed. |
3403 | Cannot perform cascading operation: '|'. |
Cannot perform cascading operation: '|'. |
3404 | Cannot perform cascading operation. The value entered is prohibited by the validation rule '|2' set for '|1'. |
Cannot perform cascading operation. The value entered is prohibited by the validation rule '|2' set for '|1'. |
3405 | Error '|' in validation rule. |
Error '|' in validation rule. |
3406 | The expression you are trying to use for the DefaultValue property is invalid because '|'. Use a valid expression to set this property. |
The expression you are trying to use for the DefaultValue property is invalid because '|'. Use a valid expression to set this property. |
3407 | The server's MSysConf table exists, but is in an incorrect format. Contact your system administrator. |
The server's MSysConf table exists, but is in an incorrect format. Contact your system administrator. |
3408 | Too many FastFind Sessions were invoked. |
Too many FastFind Sessions were invoked. |
3409 | Invalid field definition '|' in definition of index or relationship. |
Invalid field definition '|' in definition of index or relationship. |
3411 | Invalid entry. Cannot perform cascading operation in table '|1' because the value entered is too large for field '|2'. |
Invalid entry. Cannot perform cascading operation in table '|1' because the value entered is too large for field '|2'. |
3412 | Cannot perform cascading update on the table because it is currently in use by another user. |
Cannot perform cascading update on the table because it is currently in use by another user. |
3413 | Cannot perform cascading operation on table '|1' because it is currently in use by user '|3' on machine '|2'. |
Cannot perform cascading operation on table '|1' because it is currently in use by user '|3' on machine '|2'. |
3414 | Cannot perform cascading operation on table '|1' because it is currently in use. |
Cannot perform cascading operation on table '|1' because it is currently in use. |
3415 | Zero-length string is valid only in a Text or Memo field. |
Zero-length string is valid only in a Text or Memo field. |
3417 | An action query cannot be used as a row source. |
An action query cannot be used as a row source. |
3418 | Cannot open '|'. Another user has the table open using a different network control file or locking style. |
Cannot open '|'. Another user has the table open using a different network control file or locking style. |
3419 | Cannot open this Paradox 4.x or 5.x table because ParadoxNetStyle is set to 3.x in the Windows Registry. |
Cannot open this Paradox 4.x or 5.x table because ParadoxNetStyle is set to 3.x in the Windows Registry. |
3420 | Object invalid or no longer set. |
Object invalid or no longer set. |
3421 | Data type conversion error. |
Data type conversion error. |
3422 | Cannot modify table structure. Another user has the table open. |
Cannot modify table structure. Another user has the table open. |
3423 | You cannot use ODBC to import from, export to, or link an external Microsoft Jet or ISAM database table to your database. |
You cannot use ODBC to import from, export to, or link an external Microsoft Jet or ISAM database table to your database. |
3424 | Cannot create database because the locale is invalid. |
Cannot create database because the locale is invalid. |
3425 | This method or property is not currently available on this Recordset. |
This method or property is not currently available on this Recordset. |
3426 | This action was cancelled by an associated object. |
This action was cancelled by an associated object. |
3427 | Error in DAO automation. |
Error in DAO automation. |
3428 | A problem occurred in your database. Correct the problem by repairing and compacting the database. |
A problem occurred in your database. Correct the problem by repairing and compacting the database. |
3429 | Incompatible version of an installable ISAM. |
Incompatible version of an installable ISAM. |
3430 | While loading the Microsoft Excel installable ISAM, OLE was unable to initialize. |
While loading the Microsoft Excel installable ISAM, OLE was unable to initialize. |
3431 | This is not a Microsoft Excel 5.0 file. |
This is not a Microsoft Excel 5.0 file. |
3432 | Error opening a Microsoft Excel 5.0 file. |
Error opening a Microsoft Excel 5.0 file. |
3433 | Invalid setting in Excel key of the Engines section of the Windows Registry. |
Invalid setting in Excel key of the Engines section of the Windows Registry. |
3434 | Cannot expand named range. |
Cannot expand named range. |
3435 | Cannot delete spreadsheet cells. |
Cannot delete spreadsheet cells. |
3436 | Failure creating file. |
Failure creating file. |
3437 | Spreadsheet is full. |
Spreadsheet is full. |
3438 | The data being exported does not match the format described in the Schema.ini file. |
The data being exported does not match the format described in the Schema.ini file. |
3439 | You attempted to link or import a Microsoft Word mail merge file. Although you can export such files, you cannot link or import them. |
You attempted to link or import a Microsoft Word mail merge file. Although you can export such files, you cannot link or import them. |
3440 | An attempt was made to import or link an empty text file. To import or link a text file, the file must contain data. |
An attempt was made to import or link an empty text file. To import or link a text file, the file must contain data. |
3441 | Text file specification field separator matches decimal separator or text delimiter. |
Text file specification field separator matches decimal separator or text delimiter. |
3442 | In the text file specification '|1', the |2 option is invalid. |
In the text file specification '|1', the |2 option is invalid. |
3443 | The fixed width specification '|1' contains no column widths. |
The fixed width specification '|1' contains no column widths. |
3444 | In the fixed width specification '|1', column '|2' does not specify a width. |
In the fixed width specification '|1', column '|2' does not specify a width. |
3445 | Incorrect version of the DLL file '|' was found. |
Incorrect version of the DLL file '|' was found. |
3446 | Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) is missing. Try reinstalling the application that returned the error. |
Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) is missing. Try reinstalling the application that returned the error. |
3447 | The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error. |
The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error. |
3448 | A call to an OLE system function was not successful. Try reinstalling the application that returned the error. |
A call to an OLE system function was not successful. Try reinstalling the application that returned the error. |
3449 | No country code found in connection string for a linked table. |
No country code found in connection string for a linked table. |
3450 | Syntax error in query. Incomplete query clause. |
Syntax error in query. Incomplete query clause. |
3451 | Illegal reference in query. |
Illegal reference in query. |
3452 | You cannot make changes to the design of the database at this replica. |
You cannot make changes to the design of the database at this replica. |
3453 | You cannot establish or maintain an enforced relationship between a replicated table and a local table. |
You cannot establish or maintain an enforced relationship between a replicated table and a local table. |
3455 | Cannot make the database replicable. |
Cannot make the database replicable. |
3456 | Cannot make the |2 object in |1 container replicable. |
Cannot make the |2 object in |1 container replicable. |
3457 | You cannot set the KeepLocal property for an object that is already replicated. |
You cannot set the KeepLocal property for an object that is already replicated. |
3458 | The KeepLocal property cannot be set on a database; it can be set only on the objects in a database. |
The KeepLocal property cannot be set on a database; it can be set only on the objects in a database. |
3459 | After a database has been replicated, you cannot remove the replication features from the database. |
After a database has been replicated, you cannot remove the replication features from the database. |
3460 | The operation you attempted conflicts with an existing operation involving this member of the replica set. |
The operation you attempted conflicts with an existing operation involving this member of the replica set. |
3461 | The replication property you are attempting to set or delete is read-only and cannot be changed. |
The replication property you are attempting to set or delete is read-only and cannot be changed. |
3462 | Failure to load a DLL. |
Failure to load a DLL. |
3463 | Cannot find the .dll '|2'. |
Cannot find the .dll '|2'. |
3464 | Data type mismatch in criteria expression. |
Data type mismatch in criteria expression. |
3465 | The disk drive you are attempting to access is unreadable. |
The disk drive you are attempting to access is unreadable. |
3468 | Access was denied while accessing dropbox folder '|2'. |
Access was denied while accessing dropbox folder '|2'. |
3469 | The disk for dropbox folder '|2' is full. |
The disk for dropbox folder '|2' is full. |
3470 | Disk failure accessing dropbox folder '|2'. |
Disk failure accessing dropbox folder '|2'. |
3471 | Failure to write to the Synchronizer log file. |
Failure to write to the Synchronizer log file. |
3472 | Disk full for path '|1'. |
Disk full for path '|1'. |
3473 | Disk failure while accessing log file '|1'. |
Disk failure while accessing log file '|1'. |
3474 | Cannot open the log file '|1' for writing. |
Cannot open the log file '|1' for writing. |
3475 | Sharing violation while attempting to open log file '|1' in Deny Write mode. |
Sharing violation while attempting to open log file '|1' in Deny Write mode. |
3476 | Invalid dropbox path '|2'. |
Invalid dropbox path '|2'. |
3477 | Dropbox address '|2' is syntactically invalid. |
Dropbox address '|2' is syntactically invalid. |
3478 | The replica is not a partial replica. |
The replica is not a partial replica. |
3479 | Cannot designate a partial replica as the Design Master for the replica set. |
Cannot designate a partial replica as the Design Master for the replica set. |
3480 | The relationship '|' in the partial filter expression is invalid. |
The relationship '|' in the partial filter expression is invalid. |
3481 | The table name '|' in the partial filter expression is invalid. |
The table name '|' in the partial filter expression is invalid. |
3482 | The filter expression for the partial replica is invalid. |
The filter expression for the partial replica is invalid. |
3483 | The password supplied for the dropbox folder '|2' is invalid. |
The password supplied for the dropbox folder '|2' is invalid. |
3484 | The password used by the Synchronizer to write to a destination dropbox folder is invalid. |
The password used by the Synchronizer to write to a destination dropbox folder is invalid. |
3485 | The object cannot be replicated because the database is not replicated. |
The object cannot be replicated because the database is not replicated. |
3486 | You cannot add a second Replication ID AutoNumber field to a table. |
You cannot add a second Replication ID AutoNumber field to a table. |
3487 | The database you are attempting to replicate cannot be converted. |
The database you are attempting to replicate cannot be converted. |
3488 | The value specified is not a ReplicaID for any member in the replica set. |
The value specified is not a ReplicaID for any member in the replica set. |
3489 | The object specified cannot be replicated because it is missing a necessary resource. |
The object specified cannot be replicated because it is missing a necessary resource. |
3490 | Cannot create a new replica because the '|2' object in '|1' container could not be replicated. |
Cannot create a new replica because the '|2' object in '|1' container could not be replicated. |
3491 | The database must be opened in exclusive mode before it can be replicated. |
The database must be opened in exclusive mode before it can be replicated. |
3492 | The synchronization failed because a design change could not be applied to one of the replicas. |
The synchronization failed because a design change could not be applied to one of the replicas. |
3493 | Cannot set the specified Registry parameter for the Synchronizer. |
Cannot set the specified Registry parameter for the Synchronizer. |
3494 | Unable to retrieve the specified Registry parameter for the Synchronizer. |
Unable to retrieve the specified Registry parameter for the Synchronizer. |
3495 | There are no scheduled synchronization's between the two Synchronizers. |
There are no scheduled synchronization's between the two Synchronizers. |
3496 | Replication Manager cannot find the ExchangeID in the MSysExchangeLog table. |
Replication Manager cannot find the ExchangeID in the MSysExchangeLog table. |
3497 | Unable to set a schedule for the Synchronizer. |
Unable to set a schedule for the Synchronizer. |
3499 | Cannot retrieve the full path information for a member of the replica set. |
Cannot retrieve the full path information for a member of the replica set. |
3500 | You cannot specify two different Synchronizers to manage the same replica. |
You cannot specify two different Synchronizers to manage the same replica. |
3502 | The Design Master or replica is not being managed by a Synchronizer. |
The Design Master or replica is not being managed by a Synchronizer. |
3503 | The Synchronizer's Registry has no value set for the key you queried. |
The Synchronizer's Registry has no value set for the key you queried. |
3504 | The Synchronizer ID does not match an existing ID in the MSysTranspAddress table. |
The Synchronizer ID does not match an existing ID in the MSysTranspAddress table. |
3505 | You attempted to delete or get information about a partial filter that does not exist in MSysFilters. |
You attempted to delete or get information about a partial filter that does not exist in MSysFilters. |
3506 | The Synchronizer is unable to open the Synchronizer log. |
The Synchronizer is unable to open the Synchronizer log. |
3507 | Failure writing to the Synchronizer log. |
Failure writing to the Synchronizer log. |
3508 | There is no active transport for the Synchronizer. |
There is no active transport for the Synchronizer. |
3509 | Could not find a valid transport for this Synchronizer. |
Could not find a valid transport for this Synchronizer. |
3510 | The member of the replica set you are attempting to synchronize is currently being used in another synchronization. |
The member of the replica set you are attempting to synchronize is currently being used in another synchronization. |
3512 | Failed to read the dropbox folder. |
Failed to read the dropbox folder. |
3513 | Failed to write to the dropbox folder. |
Failed to write to the dropbox folder. |
3514 | Synchronizer could not find any scheduled or on-demand synchronization's to process. |
Synchronizer could not find any scheduled or on-demand synchronization's to process. |
3515 | The Microsoft Jet database engine could not read the system clock on your computer. |
The Microsoft Jet database engine could not read the system clock on your computer. |
3516 | Destination synchronizer is not configured to support indirect synchronronization, and the destination replica is unavailable for direct synchronization. |
Destination synchronizer is not configured to support indirect synchronronization, and the destination replica is unavailable for direct synchronization. |
3517 | Synchronizer could not find any messages to process. |
Synchronizer could not find any messages to process. |
3518 | Could not find Synchronizer in the MSysTranspAddress table. |
Could not find Synchronizer in the MSysTranspAddress table. |
3519 | Failed to send a message. |
Failed to send a message. |
3520 | The replica name or ID does not match a currently managed member of the replica set. |
The replica name or ID does not match a currently managed member of the replica set. |
3521 | Two members of the replica set cannot be synchronized because there is no common point to start the synchronization. |
Two members of the replica set cannot be synchronized because there is no common point to start the synchronization. |
3522 | Synchronizer cannot find the record of a specific synchronization in the MSysExchangeLog table. |
Synchronizer cannot find the record of a specific synchronization in the MSysExchangeLog table. |
3523 | Synchronizer cannot find a specific version number in the MSysSchChange table. |
Synchronizer cannot find a specific version number in the MSysSchChange table. |
3524 | The history of design changes in the replica does not match the history in the Design Master. |
The history of design changes in the replica does not match the history in the Design Master. |
3525 | Synchronizer could not access the message database. |
Synchronizer could not access the message database. |
3526 | The name selected for the system object is already in use. |
The name selected for the system object is already in use. |
3527 | The Synchronizer or Replication Manager could not find the system object. |
The Synchronizer or Replication Manager could not find the system object. |
3528 | There is no new data in shared memory for the Synchronizer or Replication Manager to read. |
There is no new data in shared memory for the Synchronizer or Replication Manager to read. |
3529 | The Synchronizer or Replication Manager found unread data in the shared memory. The existing data will be overwritten. |
The Synchronizer or Replication Manager found unread data in the shared memory. The existing data will be overwritten. |
3530 | The Synchronizer is already serving a client. |
The Synchronizer is already serving a client. |
3531 | The wait period for an event has timed out. |
The wait period for an event has timed out. |
3532 | Synchronizer could not be initialized. |
Synchronizer could not be initialized. |
3533 | The system object used by a process still exists after the process has stopped. |
The system object used by a process still exists after the process has stopped. |
3534 | Synchronizer looked for a system event but did not find one to report to the client. |
Synchronizer looked for a system event but did not find one to report to the client. |
3535 | Client has asked the Synchronizer to terminate operation. |
Client has asked the Synchronizer to terminate operation. |
3536 | Synchronizer received an invalid message for a member of the replica set that it manages. |
Synchronizer received an invalid message for a member of the replica set that it manages. |
3537 | The Synchronizer's client is no longer present and cannot be notified. |
The Synchronizer's client is no longer present and cannot be notified. |
3538 | Cannot initialize Synchronizer because there are too many applications running. |
Cannot initialize Synchronizer because there are too many applications running. |
3539 | A system error has occurred or your swap file has reached its limit. |
A system error has occurred or your swap file has reached its limit. |
3540 | Your swap file has reached its limit or is corrupted. |
Your swap file has reached its limit or is corrupted. |
3541 | Synchronizer could not be shut down properly and is still active. |
Synchronizer could not be shut down properly and is still active. |
3542 | Process stopped when attempting to terminate Synchronizer client. |
Process stopped when attempting to terminate Synchronizer client. |
3543 | Synchronizer has not been set up. |
Synchronizer has not been set up. |
3544 | Synchronizer is already running. |
Synchronizer is already running. |
3545 | The two replicas you are attempting to synchronize are from different replica sets. |
The two replicas you are attempting to synchronize are from different replica sets. |
3546 | The type of synchronization you are attempting is not valid. |
The type of synchronization you are attempting is not valid. |
3547 | Synchronizer could not find a replica from the correct set to complete the synchronization. |
Synchronizer could not find a replica from the correct set to complete the synchronization. |
3548 | GUIDs do not match or the requested GUID could not be found. |
GUIDs do not match or the requested GUID could not be found. |
3549 | The file name you provided is too long. |
The file name you provided is too long. |
3550 | There is no index on the GUID column. |
There is no index on the GUID column. |
3551 | Unable to delete the specified Registry parameter for the Synchronizer. |
Unable to delete the specified Registry parameter for the Synchronizer. |
3552 | The size of the Registry parameter exceeds the maximum allowed. |
The size of the Registry parameter exceeds the maximum allowed. |
3553 | The GUID could not be created. |
The GUID could not be created. |
3555 | All valid nicknames for replicas are already in use. |
All valid nicknames for replicas are already in use. |
3556 | Invalid path for destination dropbox folder. |
Invalid path for destination dropbox folder. |
3557 | Invalid address for destination dropbox folder. |
Invalid address for destination dropbox folder. |
3558 | Disk I/O error at destination dropbox folder. |
Disk I/O error at destination dropbox folder. |
3559 | Failure to write because destination disk is full. |
Failure to write because destination disk is full. |
3560 | The two members of the replica set you are attempting to synchronize have the same ReplicaID. |
The two members of the replica set you are attempting to synchronize have the same ReplicaID. |
3561 | The two members of the replica set you are attempting to synchronize are both Design Masters. |
The two members of the replica set you are attempting to synchronize are both Design Masters. |
3562 | Access denied at destination dropbox folder. |
Access denied at destination dropbox folder. |
3563 | Fatal error accessing a local dropbox folder. |
Fatal error accessing a local dropbox folder. |
3564 | Synchronizer cannot find the source file for messages. |
Synchronizer cannot find the source file for messages. |
3565 | There is a sharing violation in the source dropbox folder because the message database is open in another application. |
There is a sharing violation in the source dropbox folder because the message database is open in another application. |
3566 | Network I/O error. |
Network I/O error. |
3567 | Message in dropbox folder belongs to the wrong Synchronizer. |
Message in dropbox folder belongs to the wrong Synchronizer. |
3568 | Synchronizer could not delete a file. |
Synchronizer could not delete a file. |
3569 | This member of the replica set has been logically removed from the set and is no longer available. |
This member of the replica set has been logically removed from the set and is no longer available. |
3570 | The filters defining a partial replica have been changed. The partial replica must be repopulated. |
The filters defining a partial replica have been changed. The partial replica must be repopulated. |
3571 | The attempt to set a column in a partial replica violated a rule governing partial replicas. |
The attempt to set a column in a partial replica violated a rule governing partial replicas. |
3572 | A disk I/O error occurred while reading or writing to the TEMP directory. |
A disk I/O error occurred while reading or writing to the TEMP directory. |
3573 | The directory you queried for a list of replicas is not a managed directory. |
The directory you queried for a list of replicas is not a managed directory. |
3574 | The ReplicaID for this member of the replica set was reassigned during a move or copy procedure. |
The ReplicaID for this member of the replica set was reassigned during a move or copy procedure. |
3575 | The disk drive you are attempting to write to is full. |
The disk drive you are attempting to write to is full. |
3576 | The database you are attempting to open is already in use by another application. |
The database you are attempting to open is already in use by another application. |
3577 | Cannot update replication system column. |
Cannot update replication system column. |
3578 | Failure to replicate database; cannot determine whether the database is open in exclusive mode. |
Failure to replicate database; cannot determine whether the database is open in exclusive mode. |
3579 | Could not create replication system tables needed to make the database replicable. |
Could not create replication system tables needed to make the database replicable. |
3580 | Could not add rows needed to make the database replicable. |
Could not add rows needed to make the database replicable. |
3581 | Cannot open replication system table '|' because the table is already in use. |
Cannot open replication system table '|' because the table is already in use. |
3582 | Cannot make a new replica because the |2 object in |1 container could not be made replicable. |
Cannot make a new replica because the |2 object in |1 container could not be made replicable. |
3584 | Insufficient memory to complete operation. |
Insufficient memory to complete operation. |
3585 | Cannot replicate the table; the number of columns exceeds the maximum allowed. |
Cannot replicate the table; the number of columns exceeds the maximum allowed. |
3586 | Syntax error in partial filter expression on table |1. |
Syntax error in partial filter expression on table |1. |
3587 | Invalid expression in the ReplicaFilter property. |
Invalid expression in the ReplicaFilter property. |
3588 | Error when evaluating the partial filter expression. |
Error when evaluating the partial filter expression. |
3589 | The partial filter expression contains an unknown function. |
The partial filter expression contains an unknown function. |
3590 | Violates the rules for partial replicas. |
Violates the rules for partial replicas. |
3591 | Log file path '|1' is invalid. |
Log file path '|1' is invalid. |
3592 | You cannot replicate a password-protected database or set password protection on a replicated database. |
You cannot replicate a password-protected database or set password protection on a replicated database. |
3593 | You cannot change the data master attribute for the replica set. |
You cannot change the data master attribute for the replica set. |
3594 | You cannot change the data master attribute for the replica set. It allows data changes only at the Design Master. |
You cannot change the data master attribute for the replica set. It allows data changes only at the Design Master. |
3595 | The system tables in your replica are no longer reliable and the replica should not be used. |
The system tables in your replica are no longer reliable and the replica should not be used. |
3600 | Aggregation expressions cannot use GUIDs. |
Aggregation expressions cannot use GUIDs. |
3605 | Synchronizing with a non-replicated database is not allowed. The '|' database is not a Design Master or replica. |
Synchronizing with a non-replicated database is not allowed. The '|' database is not a Design Master or replica. |
3607 | The replication property you are attempting to delete is read-only and cannot be removed. |
The replication property you are attempting to delete is read-only and cannot be removed. |
3608 | Record length is too long for an indexed Paradox table. |
Record length is too long for an indexed Paradox table. |
3609 | No unique index found for the referenced field of the primary table. |
No unique index found for the referenced field of the primary table. |
3610 | Same table '|' referenced as both the source and destination in make-table query. |
Same table '|' referenced as both the source and destination in make-table query. |
3611 | Cannot execute data definition statements on linked data sources. |
Cannot execute data definition statements on linked data sources. |
3612 | Multi-level GROUP BY clause is not allowed in a subquery. |
Multi-level GROUP BY clause is not allowed in a subquery. |
3613 | Cannot create a relationship on linked ODBC tables. |
Cannot create a relationship on linked ODBC tables. |
3614 | GUID not allowed in Find method criteria expression. |
GUID not allowed in Find method criteria expression. |
3615 | Type mismatch in expression. |
Type mismatch in expression. |
3616 | Updating data in a linked table is not supported by this ISAM. |
Updating data in a linked table is not supported by this ISAM. |
3617 | Deleting data in a linked table is not supported by this ISAM. |
Deleting data in a linked table is not supported by this ISAM. |
3618 | Exceptions table could not be created on import/export. |
Exceptions table could not be created on import/export. |
3619 | Records could not be added to exceptions table. |
Records could not be added to exceptions table. |
3620 | The connection for viewing your linked Microsoft Excel worksheet was lost. |
The connection for viewing your linked Microsoft Excel worksheet was lost. |
3621 | Cannot change password on a shared open database. |
Cannot change password on a shared open database. |
3622 | You must use the dbSeeChanges option with OpenRecordset when accessing a SQL Server table that has an IDENTITY column. |
You must use the dbSeeChanges option with OpenRecordset when accessing a SQL Server table that has an IDENTITY column. |
3623 | Cannot access the FoxPro 3.0 bound DBF file '|'. |
Cannot access the FoxPro 3.0 bound DBF file '|'. |
3624 | Could not read the record; currently locked by another user. |
Could not read the record; currently locked by another user. |
3625 | The text file specification '|' does not exist. You cannot import, export, or link using the specification. |
The text file specification '|' does not exist. You cannot import, export, or link using the specification. |
3626 | The operation failed. There are too many indexes on table '|'. Delete some of the indexes on the table and try the operation again. |
The operation failed. There are too many indexes on table '|'. Delete some of the indexes on the table and try the operation again. |
3627 | Cannot find the executable file for the Synchronizer (mstran40.exe). |
Cannot find the executable file for the Synchronizer (mstran40.exe). |
3628 | Partner replica is not managed by a Synchronizer. |
Partner replica is not managed by a Synchronizer. |
3629 | Synchronizer '|1' is also using the same File System dropbox '|2'. |
Synchronizer '|1' is also using the same File System dropbox '|2'. |
3631 | Invalid Table Name In Filter |
Invalid Table Name In Filter |
3632 | Internet Transport not enabled on the remote Synchronizer. |
Internet Transport not enabled on the remote Synchronizer. |
3633 | Cannot load DLL: '|' |
Cannot load DLL: '|' |
3634 | Cannot create a replica using a partial replica. |
Cannot create a replica using a partial replica. |
3635 | Cannot create partial replica of a system database. |
Cannot create partial replica of a system database. |
3636 | Cannot populate the replica or change the replica's filter because the replica has conflicts or data errors. |
Cannot populate the replica or change the replica's filter because the replica has conflicts or data errors. |
3637 | Cannot use the crosstab of a non-fixed column as a subquery. |
Cannot use the crosstab of a non-fixed column as a subquery. |
3638 | A Source Controlled database cannot be made replicable. |
A Source Controlled database cannot be made replicable. |
3639 | Cannot create a replica of a System database. |
Cannot create a replica of a System database. |
3640 | The fetch buffer was too small for the amount of data you requested. |
The fetch buffer was too small for the amount of data you requested. |
3641 | There are fewer records remaining in the recordset than you requested. |
There are fewer records remaining in the recordset than you requested. |
3642 | A cancel was performed on the operation. |
A cancel was performed on the operation. |
3643 | One of the records in the recordset was deleted by another process. |
One of the records in the recordset was deleted by another process. |
3645 | One of the binding parameters is incorrect. |
One of the binding parameters is incorrect. |
3646 | The specified row length is shorter than the sum of the column lengths. |
The specified row length is shorter than the sum of the column lengths. |
3647 | A column requested is not being returned to the recordset. |
A column requested is not being returned to the recordset. |
3648 | Cannot synchronize a partial replica with another partial replica. |
Cannot synchronize a partial replica with another partial replica. |
3649 | The language-specific code page was not specified or could not be found. |
The language-specific code page was not specified or could not be found. |
3650 | Either the Internet is very slow or there is some problem in the replication manager setup on the internet server machine. |
Either the Internet is very slow or there is some problem in the replication manager setup on the internet server machine. |
3651 | Invalid internet address. |
Invalid internet address. |
3652 | Internet login failure. |
Internet login failure. |
3653 | Internet not set up. |
Internet not set up. |
3654 | Internal internet failure. |
Internal internet failure. |
3655 | The wininet.dll cannot be loaded or initialized. |
The wininet.dll cannot be loaded or initialized. |
3656 | Error in evaluating a partial expression |
Error in evaluating a partial expression |
3657 | Error in evaluating the boolean filter expression for table '|1'. |
Error in evaluating the boolean filter expression for table '|1'. |
3658 | Binary column '|' cannot be used in a boolean filter. |
Binary column '|' cannot be used in a boolean filter. |
3659 | Relationship '|1' is unenforced. Relationship in a partial filter expression must be enforced. |
Relationship '|1' is unenforced. Relationship in a partial filter expression must be enforced. |
3660 | Requested exchange failed because '|1'. |
Requested exchange failed because '|1'. |
3661 | Requested exchange failed because '|1' |
Requested exchange failed because '|1' |
3663 | This operation requires a different cursor library. |
This operation requires a different cursor library. |
3664 | An asynchronous OpenConnection call is not yet complete; you cannot yet reference the returned connection object until it is complete. |
An asynchronous OpenConnection call is not yet complete; you cannot yet reference the returned connection object until it is complete. |
3665 | You cannot modify the replication system object '|'. |
You cannot modify the replication system object '|'. |
3667 | A different operation is preventing this operation from being executed. |
A different operation is preventing this operation from being executed. |
3668 | Cannot perform this operation because there is no active connection. |
Cannot perform this operation because there is no active connection. |
3669 | Execution cancelled. |
Execution cancelled. |
3670 | Cursor is not valid. |
Cursor is not valid. |
3671 | Cannot find table to update. |
Cannot find table to update. |
3672 | Failed to load RDOCURS.DLL. |
Failed to load RDOCURS.DLL. |
3673 | This table contains cells that are outside the range of cells defined in this spreadsheet. |
This table contains cells that are outside the range of cells defined in this spreadsheet. |
3674 | Internet dll (wininet.dll) could not be found or loaded. |
Internet dll (wininet.dll) could not be found or loaded. |
3675 | Failure to read from an internet handle. Try the operation again. |
Failure to read from an internet handle. Try the operation again. |
3676 | Failure to write to an internet handle. Try the operation again. |
Failure to write to an internet handle. Try the operation again. |
3677 | Failure to execute the HTTP request to start internet synchronizer on the internet server. Use Replication Manager to configure internet synchronizer on the internet server. |
Failure to execute the HTTP request to start internet synchronizer on the internet server. Use Replication Manager to configure internet synchronizer on the internet server. |
3678 | Failure to connect to the FTP service on the internet server. Make sure that FTP service is running properly on the server and supports anonymous connections. |
Failure to connect to the FTP service on the internet server. Make sure that FTP service is running properly on the server and supports anonymous connections. |
3679 | Failure to do open file using FTP service. Make sure that FTP dropbox has read permissions. |
Failure to do open file using FTP service. Make sure that FTP dropbox has read permissions. |
3680 | Failure in getting a file from the server using FTP. Make sure that FTP dropbox has read permissions. |
Failure in getting a file from the server using FTP. Make sure that FTP dropbox has read permissions. |
3681 | Failure in putting a file to the server using FTP. Make sure that FTP dropbox has write permissions. |
Failure in putting a file to the server using FTP. Make sure that FTP dropbox has write permissions. |
3682 | Failure to delete a file on the server using FTP. Make sure that FTP dropbox has read and write permissions. |
Failure to delete a file on the server using FTP. Make sure that FTP dropbox has read and write permissions. |
3683 | Internet synchronizer exited unexpectedly on the server. Look at the partner replica exchange history on the internet server to figure out the problem. |
Internet synchronizer exited unexpectedly on the server. Look at the partner replica exchange history on the internet server to figure out the problem. |
3684 | There is no suitable replica with which to exchange. |
There is no suitable replica with which to exchange. |
3685 | Invalid HTTP address. |
Invalid HTTP address. |
3686 | Invalid replica path or name. |
Invalid replica path or name. |
3687 | Invalid SQL syntax - expected token: Option. |
Invalid SQL syntax - expected token: Option. |
3688 | Invalid SQL syntax - expected token: For. |
Invalid SQL syntax - expected token: For. |
3689 | Invalid SQL syntax - expected token: Privileges. |
Invalid SQL syntax - expected token: Privileges. |
3690 | Invalid SQL syntax - expected a table right/privilege. |
Invalid SQL syntax - expected a table right/privilege. |
3691 | Invalid SQL syntax - expected an object name. |
Invalid SQL syntax - expected an object name. |
3692 | Invalid SQL syntax - related tokens did not match. Jet expected GRANT...TO, REVOKE...FROM, ADD...TO, or DROP...FROM. |
Invalid SQL syntax - related tokens did not match. Jet expected GRANT...TO, REVOKE...FROM, ADD...TO, or DROP...FROM. |
3693 | Invalid SQL syntax - expected user or group name. |
Invalid SQL syntax - expected user or group name. |
3694 | Invalid SQL syntax - expected token: Grant. |
Invalid SQL syntax - expected token: Grant. |
3695 | Invalid SQL syntax - GRANT/REVOKE syntax error. |
Invalid SQL syntax - GRANT/REVOKE syntax error. |
3696 | Invalid SQL syntax - expected token: User (or) Group. |
Invalid SQL syntax - expected token: User (or) Group. |
3697 | Invalid SQL syntax - expected token: Password. |
Invalid SQL syntax - expected token: Password. |
3698 | Invalid SQL syntax - expected password. |
Invalid SQL syntax - expected password. |
3699 | Invalid SQL syntax - expected token: User. |
Invalid SQL syntax - expected token: User. |
3700 | Invalid precision for decimal data type. |
Invalid precision for decimal data type. |
3701 | Invalid scale for decimal data type. |
Invalid scale for decimal data type. |
3702 | The width of a Unicode text column must be an even number of bytes. |
The width of a Unicode text column must be an even number of bytes. |
3703 | Operation not supported on replicable databases that have not been converted to the current version. |
Operation not supported on replicable databases that have not been converted to the current version. |
3704 | You attempted to open a database that is already opened by user '|2' on machine '|1'. Try again when the database is available. |
You attempted to open a database that is already opened by user '|2' on machine '|1'. Try again when the database is available. |
3705 | Cannot make the |2 table replicable - too many columns. |
Cannot make the |2 table replicable - too many columns. |
3706 | Cannot make the |2 table replicable - too many indexes. |
Cannot make the |2 table replicable - too many indexes. |
3707 | The cascading options for the new reference conflict with existing reference '|'. |
The cascading options for the new reference conflict with existing reference '|'. |
3708 | Syntax error in Transaction statement. Expected TRANSACTION, WORK, or nothing. |
Syntax error in Transaction statement. Expected TRANSACTION, WORK, or nothing. |
3709 | The search key was not found in any record. |
The search key was not found in any record. |
3710 | MAPI folder or address book not found. |
MAPI folder or address book not found. |
3711 | Recovered replicable data. This row was recovered from a corrupted replicable database. Verify that the record contents are correct and then reinsert the record, or delete this conflict record. |
Recovered replicable data. This row was recovered from a corrupted replicable database. Verify that the record contents are correct and then reinsert the record, or delete this conflict record. |
3712 | Other. This record was rejected due to an undefined replication conflict problem. |
Other. This record was rejected due to an undefined replication conflict problem. |
3713 | Update/update conflict. Another replica also updated this record. This record lost the conflict. Either resubmit your update or delete this conflict record. |
Update/update conflict. Another replica also updated this record. This record lost the conflict. Either resubmit your update or delete this conflict record. |
3714 | Locked table. This record could not be applied during synchronization since the table was locked by another user. Resubmit this conflict record. |
Locked table. This record could not be applied during synchronization since the table was locked by another user. Resubmit this conflict record. |
3715 | Unique key violation. This record has the same key value as another record, whereas only unique values are permitted. Either change the key value in this conflict record or the winning record and then resubmit this record, or delete this conflict record. |
Unique key violation. This record has the same key value as another record, whereas only unique values are permitted. Either change the key value in this conflict record or the winning record and then resubmit this record, or delete this conflict record. |
3716 | TLV violation. This record contains a field value that does not meet the table level validation constraint. Either update the field value that is violating the validation rule and then resubmit this conflict record, or delete this conflict record. |
TLV violation. This record contains a field value that does not meet the table level validation constraint. Either update the field value that is violating the validation rule and then resubmit this conflict record, or delete this conflict record. |
3717 | Delete/RI conflict. The primary key record has been deleted by another replica, therefore this referencing record has been rejected. Either create a new primary key record that satisfies the referential integrity constraint and then resubmit your update, or delete this conflict record. |
Delete/RI conflict. The primary key record has been deleted by another replica, therefore this referencing record has been rejected. Either create a new primary key record that satisfies the referential integrity constraint and then resubmit your update, or delete this conflict record. |
3718 | Update/RI conflict. The primary key record has been updated by another replica, therefore this referencing record has been rejected. Either create a new primary key record that satisfies the referential integrity constraint, modify the foreign key value in this conflict record to match a valid primary key value and then resubmit your update, or delete this conflict record. |
Update/RI conflict. The primary key record has been updated by another replica, therefore this referencing record has been rejected. Either create a new primary key record that satisfies the referential integrity constraint, modify the foreign key value in this conflict record to match a valid primary key value and then resubmit your update, or delete this conflict record. |
3719 | Foreign key violation resulting from an invalid primary key record that was involved in a replication conflict. Either create a new primary key record that satisfies the referential integrity constraint, modify the foreign key value in this conflict record to match a valid primary key value and then resubmit this conflict record, or delete this conflict record. |
Foreign key violation resulting from an invalid primary key record that was involved in a replication conflict. Either create a new primary key record that satisfies the referential integrity constraint, modify the foreign key value in this conflict record to match a valid primary key value and then resubmit this conflict record, or delete this conflict record. |
3720 | Cannot change field '|'. It is part of one or more relationships. |
Cannot change field '|'. It is part of one or more relationships. |
3721 | Invalid SQL syntax - expected constraint name. |
Invalid SQL syntax - expected constraint name. |
3722 | Invalid SQL syntax - expected token: DEFAULT. |
Invalid SQL syntax - expected token: DEFAULT. |
3723 | Invalid SQL syntax - expected token: COMPRESSION to follow WITH. |
Invalid SQL syntax - expected token: COMPRESSION to follow WITH. |
3724 | Invalid SQL syntax - expected token: UPDATE or DELETE. |
Invalid SQL syntax - expected token: UPDATE or DELETE. |
3725 | Invalid SQL syntax - expected token: CASCADE, SET NULL, or NO ACTION. |
Invalid SQL syntax - expected token: CASCADE, SET NULL, or NO ACTION. |
3726 | Invalid SQL syntax - expected token: NULL. |
Invalid SQL syntax - expected token: NULL. |
3727 | Invalid SQL syntax - only one update rule and/or one delete rule allowed. |
Invalid SQL syntax - only one update rule and/or one delete rule allowed. |
3728 | Invalid SQL syntax - expected token: AS. |
Invalid SQL syntax - expected token: AS. |
3729 | Invalid SQL syntax - expected token: SELECT. |
Invalid SQL syntax - expected token: SELECT. |
3730 | VIEW cannot contain a parameter. |
VIEW cannot contain a parameter. |
3731 | The number of aliases specified shall be the same as the number of output columns. |
The number of aliases specified shall be the same as the number of output columns. |
3732 | Expected query name after EXECUTE. |
Expected query name after EXECUTE. |
3733 | The database has been placed in a state by an unknown user that prevents it from being opened or locked. |
The database has been placed in a state by an unknown user that prevents it from being opened or locked. |
3734 | The database has been placed in a state by user '|2' on machine '|1' that prevents it from being opened or locked. |
The database has been placed in a state by user '|2' on machine '|1' that prevents it from being opened or locked. |
3735 | Too many columns in inverted index. |
Too many columns in inverted index. |
3736 | Update/delete conflict. This updated record was deleted at another replica. Either reinsert this conflict record or delete it. |
Update/delete conflict. This updated record was deleted at another replica. Either reinsert this conflict record or delete it. |
3737 | Cannot create this type of replica from the given source replica. |
Cannot create this type of replica from the given source replica. |
3738 | Local or Anonymous replicas must synch only to their designated hub replica. |
Local or Anonymous replicas must synch only to their designated hub replica. |
3739 | The proxy replica has been removed. |
The proxy replica has been removed. |
3740 | Cannot add a new column to conflict table '|'. Delete obsolete columns and compact the database. |
Cannot add a new column to conflict table '|'. Delete obsolete columns and compact the database. |
3741 | Invalid partner synchronizer. Local or anonymous replica must synchronize with designated hub replica. |
Invalid partner synchronizer. Local or anonymous replica must synchronize with designated hub replica. |
3742 | An internet function timed out. |
An internet function timed out. |
3743 | Replica has not been synchronized within the replica set retention period. |
Replica has not been synchronized within the replica set retention period. |
3744 | Counter columns in replicable tables cannot be modified. |
Counter columns in replicable tables cannot be modified. |
3745 | The combined length of Internet Server Name, HTTP Share name, and FTP alias name should not be greater than 252 characters. |
The combined length of Internet Server Name, HTTP Share name, and FTP alias name should not be greater than 252 characters. |
3746 | Syntax error in parameters clause. Make sure the parameter exists and that you typed its value correctly. |
Syntax error in parameters clause. Make sure the parameter exists and that you typed its value correctly. |
3747 | Parameter has no default value. |
Parameter has no default value. |
3748 | Parameter | has no default value. |
Parameter | has no default value. |
3749 | The object is not a stored procedure. |
The object is not a stored procedure. |
3750 | Object | is not a stored procedure. |
Object | is not a stored procedure. |
3751 | Requested row locking, but DB is in page lock mode. |
Requested row locking, but DB is in page lock mode. |
3752 | Requested page locking, but DB is in row lock mode. |
Requested page locking, but DB is in row lock mode. |
3753 | Cannot create replica of a Jet SQL replica. |
Cannot create replica of a Jet SQL replica. |
3754 | Cannot delete from a Prevent Deletes Replica. |
Cannot delete from a Prevent Deletes Replica. |
3755 | CHECK constraint '|' does not exist. |
CHECK constraint '|' does not exist. |
3756 | CHECK constraint '|' already exists. |
CHECK constraint '|' already exists. |
3757 | The Jet sorting DLLs could not be loaded properly. |
The Jet sorting DLLs could not be loaded properly. |
3758 | Scaling of decimal value resulted in data truncation. |
Scaling of decimal value resulted in data truncation. |
3760 | Scaling of decimal value resulted in data overflow. |
Scaling of decimal value resulted in data overflow. |
3761 | The decimal field's precision is too small to accept the numeric you attempted to add. |
The decimal field's precision is too small to accept the numeric you attempted to add. |
3762 | Invalid SQL syntax - expected token: ACTION. |
Invalid SQL syntax - expected token: ACTION. |
3763 | Concurrent schema changes caused the create replica operation to fail. Try again. |
Concurrent schema changes caused the create replica operation to fail. Try again. |
3764 | Failed to re-create one or more indexes. |
Failed to re-create one or more indexes. |
3765 | Syntax error in CHECK constraint clause. |
Syntax error in CHECK constraint clause. |
3766 | Only simple SELECT queries are allowed in VIEWS. |
Only simple SELECT queries are allowed in VIEWS. |
3767 | Table '|' could not be made replicable because it could not be opened exclusively. |
Table '|' could not be made replicable because it could not be opened exclusively. |
3768 | FastFind cannot search on non-column references. |
FastFind cannot search on non-column references. |
3769 | Conflict tables cannot be renamed. |
Conflict tables cannot be renamed. |
3770 | Counter definition not in valid range. |
Counter definition not in valid range. |
3771 | Local or Anonymous replicas cannot be made the design master. |
Local or Anonymous replicas cannot be made the design master. |
3772 | Without Administer permission, replica priority must be in the range 0 - |. |
Without Administer permission, replica priority must be in the range 0 - |. |
3773 | Cannot delete one or more objects: |. |
Cannot delete one or more objects: |. |
3774 | Pin value is not valid. |
Pin value is not valid. |
3775 | Unable to load Jet SQL Server Reconciler - MSRPJT40.dll. |
Unable to load Jet SQL Server Reconciler - MSRPJT40.dll. |
3776 | Unable to exchange between two Jet SQL Server Replicas. |
Unable to exchange between two Jet SQL Server Replicas. |
3777 | Illegal Operation performed on a Jet SQL Server Replica. |
Illegal Operation performed on a Jet SQL Server Replica. |
3778 | The Jet database is wrong or missing for this SQL/Jet replica set. |
The Jet database is wrong or missing for this SQL/Jet replica set. |
3779 | Unable to change Column Level Tracking Property on objects that are already Replicable. |
Unable to change Column Level Tracking Property on objects that are already Replicable. |
3780 | Invalid SQL syntax - expected a view name. |
Invalid SQL syntax - expected a view name. |
3781 | Invalid SQL syntax - expected a procedure name. |
Invalid SQL syntax - expected a procedure name. |
3782 | Invalid SQL syntax - currently only one column-level CHECK constraint is allowed. |
Invalid SQL syntax - currently only one column-level CHECK constraint is allowed. |
3783 | Invalid SQL syntax - cannot use multiple columns in a column-level CHECK constraint. |
Invalid SQL syntax - cannot use multiple columns in a column-level CHECK constraint. |
3784 | Database is already replicable. |
Database is already replicable. |
3785 | Invalid SQL syntax - expected token: Database. |
Invalid SQL syntax - expected token: Database. |
3786 | Invalid SQL syntax - expected a database privilege, such as CREATEDB or CONNECT. |
Invalid SQL syntax - expected a database privilege, such as CREATEDB or CONNECT. |
3787 | This operation is not allowed in subqueries. |
This operation is not allowed in subqueries. |
3788 | Cannot create an index on this MAPI folder/addressbook. |
Cannot create an index on this MAPI folder/addressbook. |
3789 | Illegal column-level constraint. |
Illegal column-level constraint. |
3790 | This object requires a newer version of the Microsoft Jet database engine. |
This object requires a newer version of the Microsoft Jet database engine. |
3791 | This index requires Microsoft Jet database engine |. |
This index requires Microsoft Jet database engine |. |
3792 | The index '|2' requires Microsoft Jet database engine |1. |
The index '|2' requires Microsoft Jet database engine |1. |
3793 | The column '|2' requires Microsoft Jet database engine |1. |
The column '|2' requires Microsoft Jet database engine |1. |
3794 | This table requires Microsoft Jet database engine |. |
This table requires Microsoft Jet database engine |. |
3795 | The table '|2' requires Microsoft Jet database engine |1. |
The table '|2' requires Microsoft Jet database engine |1. |
3796 | The version of MSRECR40.DLL that was loaded was too old. Run setup again to get the correct version of this file. |
The version of MSRECR40.DLL that was loaded was too old. Run setup again to get the correct version of this file. |
3797 | The SQL/Jet exchange failed, look in the SQLServer Agent history for details. |
The SQL/Jet exchange failed, look in the SQLServer Agent history for details. |
3798 | CHECK constraints are not allowed on replicable databases. |
CHECK constraints are not allowed on replicable databases. |
3799 | Could not find field '|'. |
Could not find field '|'. |
3800 | '|' is not an index in this table. |
'|' is not an index in this table. |
3801 | The object (|) cannot be used in a CHECK constraint clause. |
The object (|) cannot be used in a CHECK constraint clause. |
3802 | Error evaluating | CHECK constraint. | |
Error evaluating | CHECK constraint. | |
3803 | DDL cannot be completed on this table because it is referenced by constraint | on table |. |
DDL cannot be completed on this table because it is referenced by constraint | on table |. |
3804 | There are no MAPI clients installed on this machine. Install a MAPI client (like Outlook) on this machine. |
There are no MAPI clients installed on this machine. Install a MAPI client (like Outlook) on this machine. |
3805 | CHECK constraints on table | will not be transferred to this table. CHECK constraints can only be created via SQL DDL statements. |
CHECK constraints on table | will not be transferred to this table. CHECK constraints can only be created via SQL DDL statements. |
3806 | Cannot set multiple NULL, NOT NULL attributes. |
Cannot set multiple NULL, NOT NULL attributes. |
3807 | Query | contains an ambiguous column name that is conflicting with the correlation (alias) name |. Either fully qualify the column name or change the correlation (alias) name. |
Query | contains an ambiguous column name that is conflicting with the correlation (alias) name |. Either fully qualify the column name or change the correlation (alias) name. |
3808 | Need a version 4.x or greater format system database to perform this operation. |
Need a version 4.x or greater format system database to perform this operation. |
3809 | Query | was created with a later release of Jet and may have syntax that this version of Jet cannot execute. This query can only be executed with the version of Jet that created it. |
Query | was created with a later release of Jet and may have syntax that this version of Jet cannot execute. This query can only be executed with the version of Jet that created it. |
6000 | ****** SYNCHRONIZER LOG FILE V4.0 ********** |
****** SYNCHRONIZER LOG FILE V4.0 ********** |
6001 | Start session |
Start session |
6002 | Close session |
Close session |
6003 | Closing replica set member |
Closing replica set member |
6004 | Opening replica set member |
Opening replica set member |
6005 | Load synchronizer |
Load synchronizer |
6006 | Start synchronizer |
Start synchronizer |
6007 | Unloading synchronizer |
Unloading synchronizer |
6008 | Closing synchronizer |
Closing synchronizer |
6009 | Read message |
Read message |
6010 | Write message |
Write message |
6011 | Send message error |
Send message error |
6012 | Process message error |
Process message error |
6013 | Sending message |
Sending message |
6014 | Synchronizer error |
Synchronizer error |
6015 | Database access error |
Database access error |
6016 | Synchronizing local members of all replica sets |
Synchronizing local members of all replica sets |
6017 | Synchronizing replica set members |
Synchronizing replica set members |
6018 | Refreshing the list of managed replica set members |
Refreshing the list of managed replica set members |
6019 | Initiate exchange |
Initiate exchange |
6020 | Start exchange |
Start exchange |
6021 | Close exchange |
Close exchange |
6022 | Direct exchange |
Direct exchange |
6023 | Managed directory |
Managed directory |
6024 | Managed replicas |
Managed replicas |
6025 | Cancel exchange |
Cancel exchange |
6026 | Disable/enable replica set member |
Disable/enable replica set member |
6027 | Problem accessing replica set member |
Problem accessing replica set member |
6028 | Clear problem accessing replica set member |
Clear problem accessing replica set member |
6029 | Detected multiple Design Masters |
Detected multiple Design Masters |
6030 | Replica set member past expiration date |
Replica set member past expiration date |
6031 | This other synchronizer is also managing this replica |
This other synchronizer is also managing this replica |
6032 | Deleting old information from managed replica set members |
Deleting old information from managed replica set members |
6033 | Deleting old information from managed replica set member |
Deleting old information from managed replica set member |
6034 | Reviving disabled replica set member |
Reviving disabled replica set member |
6035 | Trying Transport for exchange |
Trying Transport for exchange |
6036 | Log Type = |
Log Type = |
6037 | Time = |
Time = |
6038 | Transport = |
Transport = |
6039 | Replica = |
Replica = |
6040 | Synchronizer Type = |
Synchronizer Type = |
6041 | Synchronizer Address = |
Synchronizer Address = |
6042 | Message Type = |
Message Type = |
6043 | Sender ReplicaID = |
Sender ReplicaID = |
6044 | Destination ReplicaID = |
Destination ReplicaID = |
6045 | Result = |
Result = |
6046 | Error = |
Error = |
6047 | Reason = |
Reason = |
6048 | DLL Path = |
DLL Path = |
6049 | Dropbox = |
Dropbox = |
6050 | Destination Synchronizer = |
Destination Synchronizer = |
6051 | Sender Synchronizer = |
Sender Synchronizer = |
6052 | Synchronizer ID = |
Synchronizer ID = |
6053 | Gateway Replica Set Member = |
Gateway Replica Set Member = |
6054 | ReplicaID = |
ReplicaID = |
6055 | Partner Replica Set Member = |
Partner Replica Set Member = |
6056 | Requested By User = |
Requested By User = |
6057 | Exchange Type = |
Exchange Type = |
6058 | Exchange ID = |
Exchange ID = |
6059 | Directory = |
Directory = |
6060 | ReplicaID Affected = |
ReplicaID Affected = |
6061 | Disable Flag = |
Disable Flag = |
6062 | ReplicaID Too Old = |
ReplicaID Too Old = |
6063 | Basis = |
Basis = |
6064 | Version = |
Version = |
6065 | Guid = |
Guid = |
6066 | Scheduled = |
Scheduled = |
6067 | Local Synch = |
Local Synch = |
6068 | Initiated Locally = |
Initiated Locally = |
6069 | Success |
Success |
6070 | Failure |
Failure |
6071 | Yes |
Yes |
6072 | No |
No |
6073 | UNKNOWN ERROR (%ld) |
UNKNOWN ERROR (%ld) |
6074 | Failure During Disk I/O |
Failure During Disk I/O |
6075 | Read verification failure |
Read verification failure |
6076 | Disk is full |
Disk is full |
6077 | Database is corrupt |
Database is corrupt |
6078 | Disk is not ready |
Disk is not ready |
6079 | Database has reached maximum size |
Database has reached maximum size |
6080 | File cannot be locked |
File cannot be locked |
6081 | Cannot place a write lock |
Cannot place a write lock |
6082 | Cannot place a read lock |
Cannot place a read lock |
6083 | Cannot place a commit lock |
Cannot place a commit lock |
6084 | Using maximum sharing buffers |
Using maximum sharing buffers |
6085 | Out of memory |
Out of memory |
6086 | Out of temporary disk space |
Out of temporary disk space |
6087 | No suitable replica set member to exchange with |
No suitable replica set member to exchange with |
6088 | Error accessing message database |
Error accessing message database |
6089 | No suitable synchronizer address |
No suitable synchronizer address |
6090 | Error in getting system clock |
Error in getting system clock |
6091 | No synchronizer |
No synchronizer |
6092 | Failure to load synchronizer DLL |
Failure to load synchronizer DLL |
6093 | Synchronizer not found |
Synchronizer not found |
6094 | Out of synchronization |
Out of synchronization |
6095 | Mismatch design history between two members in the replica set |
Mismatch design history between two members in the replica set |
6096 | Remote replica set member has been removed |
Remote replica set member has been removed |
6097 | Invalid message |
Invalid message |
6098 | Replica set member is already in use by another replication function |
Replica set member is already in use by another replication function |
6099 | Database is exclusively locked by another application |
Database is exclusively locked by another application |
6100 | File access denied |
File access denied |
6101 | Synchronizer write failure |
Synchronizer write failure |
6102 | Synchronizer send failure |
Synchronizer send failure |
6103 | Replication synchronization error has occurred. Look at the synchronization history of the partner replica |
Replication synchronization error has occurred. Look at the synchronization history of the partner replica |
6104 | Error accessing temp disk |
Error accessing temp disk |
6105 | UNKNOWN REASON (%ld) |
UNKNOWN REASON (%ld) |
6106 | Invalid destination path |
Invalid destination path |
6107 | Invalid destination address |
Invalid destination address |
6108 | Disk I/O error at destination |
Disk I/O error at destination |
6109 | Destination disk is full |
Destination disk is full |
6110 | Cannot access destination |
Cannot access destination |
6111 | Invalid address |
Invalid address |
6112 | Invalid path |
Invalid path |
6113 | The destination dropbox password is invalid |
The destination dropbox password is invalid |
6114 | The dropbox password is invalid |
The dropbox password is invalid |
6115 | Design changes could not be made |
Design changes could not be made |
6116 | Replicas belong to different replica sets |
Replicas belong to different replica sets |
6117 | Both replica set members have the same ReplicaID |
Both replica set members have the same ReplicaID |
6118 | Both replica set members are Design Masters |
Both replica set members are Design Masters |
6119 | Both replica set members are Partials |
Both replica set members are Partials |
6120 | Design changes could not be made at the remote member in the replica set |
Design changes could not be made at the remote member in the replica set |
6121 | Replica set member is not managed |
Replica set member is not managed |
6122 | There are one or more pending exchanges to the same destination replica |
There are one or more pending exchanges to the same destination replica |
6123 | This member in the replica set has expired |
This member in the replica set has expired |
6124 | Remote member in the replica set has expired |
Remote member in the replica set has expired |
6125 | An error occurred while using this member in the replica set |
An error occurred while using this member in the replica set |
6126 | An error occurred while using the partner member in the replica set |
An error occurred while using the partner member in the replica set |
6127 | Partner member in the replica set is not being managed |
Partner member in the replica set is not being managed |
6128 | Cannot find Synchronizer Exe on the path |
Cannot find Synchronizer Exe on the path |
6129 | A user table is opened exclusively. Could not apply changes. |
A user table is opened exclusively. Could not apply changes. |
6130 | A user table is opened exclusively at partner member in the replica set; could not apply changes at partner member |
A user table is opened exclusively at partner member in the replica set; could not apply changes at partner member |
6131 | Message file has bad format or is corrupted |
Message file has bad format or is corrupted |
6132 | Data |
Data |
6133 | Design |
Design |
6134 | Some problem in synchronizer setup |
Some problem in synchronizer setup |
6135 | Partner replica is exclusively locked; could not apply changes |
Partner replica is exclusively locked; could not apply changes |
6136 | 6137 Create table |
6137 Create table |
6138 | Delete table |
Delete table |
6139 | Rename table |
Rename table |
6140 | Add column |
Add column |
6141 | Set column information |
Set column information |
6142 | Delete column |
Delete column |
6143 | Rename column |
Rename column |
6144 | Create index |
Create index |
6145 | Set index information |
Set index information |
6146 | Delete index |
Delete index |
6147 | Rename index |
Rename index |
6148 | Set property |
Set property |
6149 | Create query |
Create query |
6150 | Create object |
Create object |
6151 | Delete object |
Delete object |
6152 | Rename object |
Rename object |
6153 | Set object column |
Set object column |
6154 | Set owner |
Set owner |
6155 | Set access |
Set access |
6156 | Create relationship |
Create relationship |
6157 | Delete relationship |
Delete relationship |
6158 | Create reference |
Create reference |
6159 | Delete reference |
Delete reference |
6160 | Rename reference |
Rename reference |
6161 | Open Lock bytes |
Open Lock bytes |
6162 | Change query |
Change query |
6163 | Delete |
Delete |
6164 | Insert |
Insert |
6165 | Update |
Update |
6166 | The operation was canceled by the user |
The operation was canceled by the user |
6167 | This operation is blocked by another replication function |
This operation is blocked by another replication function |
6168 | More than one synchronizer is managing the replica |
More than one synchronizer is managing the replica |
6169 | Synchronizer |
Synchronizer |
6170 | The filters of the partial replica have been changed. |
The filters of the partial replica have been changed. |
6171 | Either Internet is too slow or there is some problem on the server |
Either Internet is too slow or there is some problem on the server |
6172 | Unknown Synchronizer |
Unknown Synchronizer |
6176 | Failure to execute the HTTP request to start the internet synchronizer on the internet server. Use Replication Manager to configure internet synchronizer on the internet server. |
Failure to execute the HTTP request to start the internet synchronizer on the internet server. Use Replication Manager to configure internet synchronizer on the internet server. |
6178 | Failure to open file using FTP service. Make sure that FTP dropbox has read permissions. |
Failure to open file using FTP service. Make sure that FTP dropbox has read permissions. |
6182 | Internet synchronizer exited unexpectedly on the server. Look at the exchange history in the partner replica on the internet server to figure out the problem. |
Internet synchronizer exited unexpectedly on the server. Look at the exchange history in the partner replica on the internet server to figure out the problem. |
6183 | Previous scheduled File System exchange to the same destination synchronizer is still in progress. Make sure that the remote synchronizer is working properly. |
Previous scheduled File System exchange to the same destination synchronizer is still in progress. Make sure that the remote synchronizer is working properly. |
6185 | _Local |
_Local |
6186 | _Conflict |
_Conflict |
6187 | The Synchronizer is closing. Please wait while it finishes processing. |
The Synchronizer is closing. Please wait while it finishes processing. |
6188 | Local or Anonymous replicas can only synchronize with their designated partner replica. |
Local or Anonymous replicas can only synchronize with their designated partner replica. |
6189 | Setting Transport Priority |
Setting Transport Priority |
6190 | Priority = |
Priority = |
6191 | Database Replication |
Database Replication |
6192 | MSRECR40.DLL could not be found. Run setup again to install this file. |
MSRECR40.DLL could not be found. Run setup again to install this file. |
6193 | An Internet function has timed out. |
An Internet function has timed out. |
9000 | Invalid procedure call |
Invalid procedure call |
9001 | Overflow |
Overflow |
9003 | Subscript out of range |
Subscript out of range |
9004 | Duplicate definition |
Duplicate definition |
9005 | Division by zero |
Division by zero |
9006 | Type mismatch |
Type mismatch |
9007 | Out of string space |
Out of string space |
9008 | Too many DLL application clients |
Too many DLL application clients |
9009 | Error in loading DLL |
Error in loading DLL |
9010 | Internal error |
Internal error |
9011 | Bad filename or number |
Bad filename or number |
9012 | Invalid pattern string |
Invalid pattern string |
9013 | Invalid use of Null |
Invalid use of Null |
9014 | Class does not support OLE Automation |
Class does not support OLE Automation |
9015 | Object does not support this property or method |
Object does not support this property or method |
9016 | Internal OLE Automation error |
Internal OLE Automation error |
9017 | Object does not support this action |
Object does not support this action |
9018 | Object does not support named arguments |
Object does not support named arguments |
9019 | Object does not support current locale setting |
Object does not support current locale setting |
9020 | Named argument not found |
Named argument not found |
9021 | Argument not optional |
Argument not optional |
9022 | Wrong number of arguments |
Wrong number of arguments |
9023 | Object not a collection |
Object not a collection |
9024 | Unknown |
Unknown |
9025 | Argument count mismatch |
Argument count mismatch |
9026 | Ambiguous name |
Ambiguous name |
9027 | Compile error |
Compile error |
9028 | Cannot execute code in BREAK mode |
Cannot execute code in BREAK mode |
10000 | Consolidate_Area |
Consolidate_Area |
10001 | Auto_Open |
Auto_Open |
10002 | Auto_Close |
Auto_Close |
10003 | Extract |
Extract |
10004 | Database |
Database |
10005 | Criteria |
Criteria |
10006 | Print_Area |
Print_Area |
10007 | Print_Titles |
Print_Titles |
10008 | Recorder |
Recorder |
10009 | Data_Form |
Data_Form |
10010 | Auto_Activate |
Auto_Activate |
10011 | Auto_Deactivate |
Auto_Deactivate |
10012 | Sheet_Title |
Sheet_Title |
10013 | #NULL! |
#NULL! |
10014 | #DIV/0! |
#DIV/0! |
10015 | #VALUE! |
#VALUE! |
10016 | REF! |
REF! |
10017 | #NAME? |
#NAME? |
10018 | #NUM! |
#NUM! |
10019 | #N/A |
#N/A |
10020 | TRUE |
TRUE |
10021 | FALSE |
FALSE |
10022 | Jan |
Jan |
10023 | Feb |
Feb |
10024 | Mar |
Mar |
10025 | Apr |
Apr |
10026 | May |
May |
10027 | Jun |
Jun |
10028 | Jul |
Jul |
10029 | Aug |
Aug |
10030 | Sep |
Sep |
10031 | Oct |
Oct |
10032 | Nov |
Nov |
10033 | Dec |
Dec |
10034 | January |
January |
10035 | February |
February |
10036 | March |
March |
10037 | April |
April |
10039 | June |
June |
10040 | July |
July |
10041 | August |
August |
10042 | September |
September |
10043 | October |
October |
10044 | November |
November |
10045 | December |
December |
10046 | Sunday |
Sunday |
10047 | Monday |
Monday |
10048 | Tuesday |
Tuesday |
10049 | Wednesday |
Wednesday |
10050 | Thursday |
Thursday |
10051 | Friday |
Friday |
10052 | Saturday |
Saturday |
10053 | Sun |
Sun |
10054 | Mon |
Mon |
10055 | Tue |
Tue |
10056 | Wed |
Wed |
10057 | Ths |
Ths |
10058 | Fri |
Fri |
10059 | Sat |
Sat |
10060 | ImportErrors |
ImportErrors |
10061 | ExportErrors |
ExportErrors |
10062 | Error |
Error |
10063 | Field |
Field |
10064 | Row |
Row |
10065 | Unparsable Record |
Unparsable Record |
10066 | Type Conversion Failure |
Type Conversion Failure |
10067 | Row Truncation |
Row Truncation |
10068 | Field Truncation |
Field Truncation |
10069 | Date Out Of Range |
Date Out Of Range |
10070 | Rows dropped due to worksheet row limit |
Rows dropped due to worksheet row limit |
10071 | Validation rule violation |
Validation rule violation |
10072 | Null value in an auto-number field |
Null value in an auto-number field |
10076 | Import data from the external file into the current database. Changing data in the current database will not change data in the external file. |
Import data from the external file into the current database. Changing data in the current database will not change data in the external file. |
10077 | Create a table in the current database that is linked to the external file. Changing data in the current database will change data in the external file. |
Create a table in the current database that is linked to the external file. Changing data in the current database will change data in the external file. |
10078 | Export data from the current database into a Paradox 3 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Paradox 3 file. This process will overwrite the data if exported to an existing file. |
10079 | Export data from the current database into a Paradox 4 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Paradox 4 file. This process will overwrite the data if exported to an existing file. |
10080 | Export data from the current database into a Paradox 5 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Paradox 5 file. This process will overwrite the data if exported to an existing file. |
10081 | Export data from the current database into a dBase III file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a dBase III file. This process will overwrite the data if exported to an existing file. |
10082 | Export data from the current database into a dBase IV file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a dBase IV file. This process will overwrite the data if exported to an existing file. |
10083 | Export data from the current database into a dBase 5 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a dBase 5 file. This process will overwrite the data if exported to an existing file. |
10084 | Export data from the current database into a Microsoft FoxPro 2.0 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Microsoft FoxPro 2.0 file. This process will overwrite the data if exported to an existing file. |
10085 | Export data from the current database into a Microsoft FoxPro 2.5 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Microsoft FoxPro 2.5 file. This process will overwrite the data if exported to an existing file. |
10086 | Export data from the current database into a Microsoft FoxPro 2.6 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Microsoft FoxPro 2.6 file. This process will overwrite the data if exported to an existing file. |
10087 | Export data from the current database into a Microsoft FoxPro 3.0 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Microsoft FoxPro 3.0 file. This process will overwrite the data if exported to an existing file. |
10088 | Export data from the current database into a Btrieve database. |
Export data from the current database into a Btrieve database. |
10089 | Export data from the current database into a text file. This process will overwrite data if exported to an existing file. |
Export data from the current database into a text file. This process will overwrite data if exported to an existing file. |
10090 | Create a table in the current database that is linked to the external file. Changing data in the current database will change data in the external file. Only one user at a time can change data in the file. |
Create a table in the current database that is linked to the external file. Changing data in the current database will change data in the external file. Only one user at a time can change data in the file. |
10091 | Export data from the current database into an Excel 3 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into an Excel 3 file. This process will overwrite the data if exported to an existing file. |
10092 | Export data from the current database into an Excel 4 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into an Excel 4 file. This process will overwrite the data if exported to an existing file. |
10093 | Export data from the current database into an Excel 5-7 file. |
Export data from the current database into an Excel 5-7 file. |
10094 | Export data from the current database into an Excel 97-2000 file. |
Export data from the current database into an Excel 97-2000 file. |
10095 | Export data from the current database into a Lotus 1-2-3 version 2 file. This process will overwrite data if exported to an existing file. |
Export data from the current database into a Lotus 1-2-3 version 2 file. This process will overwrite data if exported to an existing file. |
10096 | Export data from the current database into a Lotus 1-2-3 version 3 file. |
Export data from the current database into a Lotus 1-2-3 version 3 file. |
10097 | Export data from the current database into a Lotus 1-2-3 version 4 file. |
Export data from the current database into a Lotus 1-2-3 version 4 file. |
10098 | R |
R |
10099 | C |
C |
10100 | dBASE Index (*.ndx) |
dBASE Index (*.ndx) |
10101 | dBASE Index (*.ndx;*.mdx) |
dBASE Index (*.ndx;*.mdx) |
10102 | FoxPro Index (*.idx;*.cdx) |
FoxPro Index (*.idx;*.cdx) |
10103 | Text Files (*.txt;*.csv;*.tab;*.asc) |
Text Files (*.txt;*.csv;*.tab;*.asc) |
10104 | MS Sans Serif |
MS Sans Serif |
10105 | Importance |
Importance |
10106 | Message Class |
Message Class |
10107 | Priority |
Priority |
10108 | Sensitivity |
Sensitivity |
10109 | Subject |
Subject |
10110 | From |
From |
10111 | Message To Me |
Message To Me |
10112 | Message CC to Me |
Message CC to Me |
10113 | Sender Name |
Sender Name |
10114 | CC |
CC |
10115 | To |
To |
10116 | Received |
Received |
10117 | Message Flags |
Message Flags |
10118 | Message Size |
Message Size |
10119 | Message Status |
Message Status |
10120 | Body |
Body |
10121 | Creation Time |
Creation Time |
10122 | Last Modification Time |
Last Modification Time |
10123 | Subject Prefix |
Subject Prefix |
10124 | Parent EntryId |
Parent EntryId |
10125 | Has Attachments |
Has Attachments |
10126 | Normalized Subject |
Normalized Subject |
10127 | Access |
Access |
10128 | Row Type |
Row Type |
10129 | Instance Key |
Instance Key |
10130 | Mapping Signature |
Mapping Signature |
10131 | Record Key |
Record Key |
10132 | Store Record Key |
Store Record Key |
10133 | Store EntryId |
Store EntryId |
10134 | Object Type |
Object Type |
10135 | EntryId |
EntryId |
10136 | Depth |
Depth |
10137 | Store Support Mask |
Store Support Mask |
10138 | Content Unread |
Content Unread |
10139 | Display name |
Display name |
10140 | E-mail type |
E-mail type |
10141 | E-mail address |
E-mail address |
10142 | Notes |
Notes |
10143 | Search Key |
Search Key |
10144 | Display Type |
Display Type |
10145 | Template Id |
Template Id |
10146 | Alias |
Alias |
10147 | First |
First |
10148 | Phone |
Phone |
10149 | Home Phone |
Home Phone |
10150 | Initials |
Initials |
10151 | Common Name |
Common Name |
10152 | Last |
Last |
10153 | Company |
Company |
10154 | Title |
Title |
10155 | Department |
Department |
10156 | Office |
Office |
10157 | Business2 Phone |
Business2 Phone |
10158 | Mobile Phone |
Mobile Phone |
10159 | Transmit Name |
Transmit Name |
10160 | Pager Phone |
Pager Phone |
10161 | User Certificate |
User Certificate |
10162 | Fax Number |
Fax Number |
10163 | Country |
Country |
10164 | City |
City |
10165 | State |
State |
10166 | Address |
Address |
10167 | Zip code |
Zip code |
10168 | Post Office Box |
Post Office Box |
10169 | Telex Number |
Telex Number |
10170 | Assistant Phone Number |
Assistant Phone Number |
10171 | Home2 Phone |
Home2 Phone |
10172 | Assistant |
Assistant |
10173 | Send Rich Text |
Send Rich Text |
10174 | Primary Capability |
Primary Capability |
10175 | Primary |
Primary |
10176 | File As |
File As |
10178 | Home Address |
Home Address |
10179 | Business Address |
Business Address |
10180 | Other Address |
Other Address |
10181 | Journal |
Journal |
10182 | Web Page |
Web Page |
10183 | HTML Documents (*.html;*.htm) |
HTML Documents (*.html;*.htm) |
10184 | Business Address Street |
Business Address Street |
10185 | Business Address City |
Business Address City |
10186 | Business Address State |
Business Address State |
10187 | Business Address Postal Code |
Business Address Postal Code |
10188 | Business Address Country |
Business Address Country |
10189 | Business Address PO Box |
Business Address PO Box |
10190 | User Field 1 |
User Field 1 |
10191 | User Field 2 |
User Field 2 |
10192 | User Field 3 |
User Field 3 |
10193 | User Field 4 |
User Field 4 |
10194 | % Complete |
% Complete |
10195 | Team Task |
Team Task |
10196 | Start Date |
Start Date |
10197 | Due Date |
Due Date |
10198 | Date Completed |
Date Completed |
10199 | Actual Work |
Actual Work |
10200 | Total Work |
Total Work |
10201 | Complete |
Complete |
10202 | Owner |
Owner |
10203 | Requested By |
Requested By |
10204 | Task Order (debug) |
Task Order (debug) |
10205 | Recurring |
Recurring |
10206 | Role |
Role |
10207 | Schedule+ Priority |
Schedule+ Priority |
10208 | Address Layout |
Address Layout |
10209 | Name Suffix |
Name Suffix |
10210 | Home Email Address |
Home Email Address |
10211 | Work Email Address |
Work Email Address |
10212 | Spouse Birthday |
Spouse Birthday |
10213 | Salutation |
Salutation |
10214 | Address Book Properties |
Address Book Properties |
10215 | Icon |
Icon |
10216 | Created |
Created |
10217 | Contents |
Contents |
10218 | Modified |
Modified |
10219 | Status |
Status |
10220 | Task Duration |
Task Duration |
10221 | Task Reset Reminder |
Task Reset Reminder |
10222 | Task Accepted |
Task Accepted |
10223 | Task Version |
Task Version |
10224 | Task State |
Task State |
10225 | Task Last Update |
Task Last Update |
10226 | Task SOC |
Task SOC |
10227 | Task History |
Task History |
10228 | Task Updates |
Task Updates |
10229 | Task Last User |
Task Last User |
10230 | Color |
Color |
10231 | Width |
Width |
10232 | Height |
Height |
10233 | X |
X |
10234 | Y |
Y |
10235 | Content |
Content |
10236 | Keywords |
Keywords |
10237 | Folder Name |
Folder Name |
10238 | Keywords Tag |
Keywords Tag |
10239 | Log Type |
Log Type |
10240 | Log Start Date |
Log Start Date |
10241 | Log Start Time |
Log Start Time |
10242 | Log Start |
Log Start |
10243 | Log Duration |
Log Duration |
10244 | Log End |
Log End |
10245 | Log Flags |
Log Flags |
10246 | Contact log |
Contact log |
10247 | Document Printed |
Document Printed |
10248 | Document Saved |
Document Saved |
10249 | Document Routed |
Document Routed |
10250 | Document Posted |
Document Posted |
10251 | Description |
Description |
10252 | Delta |
Delta |
10253 | Time |
Time |
10254 | Set |
Set |
10256 | Date |
Date |
10257 | Private |
Private |
10258 | Age |
Age |
10259 | Side Effects |
Side Effects |
10261 | Attachements |
Attachements |
10262 | Custom Pages |
Custom Pages |
10263 | Start |
Start |
10264 | End |
End |
10265 | Task Mode |
Task Mode |
10266 | Global Object ID |
Global Object ID |
10267 | Sniff State |
Sniff State |
10268 | Mileage |
Mileage |
10269 | Billing |
Billing |
10272 | BCC |
BCC |
10273 | Companies |
Companies |
10274 | Contacts |
Contacts |
10276 | Contact |
Contact |
10277 | Recall Time |
Recall Time |
10278 | Min Read Version |
Min Read Version |
10279 | Min Write Version |
Min Write Version |
10280 | Current Version |
Current Version |
10281 | Version |
Version |
10282 | Next Time |
Next Time |
10283 | Deleted |
Deleted |
10284 | Header Item |
Header Item |
10285 | Account |
Account |
10286 | ID |
ID |
10287 | TNEF |
TNEF |
10288 | Last Author Class |
Last Author Class |
10289 | Send Plain Text Only |
Send Plain Text Only |
10290 | Mailing Address Indicator |
Mailing Address Indicator |
10291 | File Under ID |
File Under ID |
10292 | Children |
Children |
10293 | Referred By |
Referred By |
10295 | Name |
Name |
10296 | Display Name |
Display Name |
10297 | Entry ID |
Entry ID |
10298 | Type |
Type |
10299 | Email Address |
Email Address |
10300 | Original Display Name |
Original Display Name |
10301 | Original Entry ID |
Original Entry ID |
10302 | Email Type |
Email Type |
10303 | Address Selection |
Address Selection |
10304 | Email Selection |
Email Selection |
10305 | Phone1 Selection |
Phone1 Selection |
10306 | Phone2 Selection |
Phone2 Selection |
10307 | Phone3 Selection |
Phone3 Selection |
10308 | Phone4 Selection |
Phone4 Selection |
10309 | Phone5 Selection |
Phone5 Selection |
10310 | Phone6 Selection |
Phone6 Selection |
10311 | Phone7 Selection |
Phone7 Selection |
10312 | Phone8 Selection |
Phone8 Selection |
10313 | Address Selected |
Address Selected |
10314 | Email Selected |
Email Selected |
10315 | Phone1 Selected |
Phone1 Selected |
10316 | Phone2 Selected |
Phone2 Selected |
10317 | Phone3 Selected |
Phone3 Selected |
10318 | Phone4 Selected |
Phone4 Selected |
10319 | Phone5 Selected |
Phone5 Selected |
10320 | Phone6 Selected |
Phone6 Selected |
10321 | Phone7 Selected |
Phone7 Selected |
10322 | Phone8 Selected |
Phone8 Selected |
10324 | Export data from the current database into a dBase 7 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a dBase 7 file. This process will overwrite the data if exported to an existing file. |
10325 | Export data from the current database into a Paradox 7-8 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Paradox 7-8 file. This process will overwrite the data if exported to an existing file. |
10326 | Export data from the current database into a Paradox 8 file. This process will overwrite the data if exported to an existing file. |
Export data from the current database into a Paradox 8 file. This process will overwrite the data if exported to an existing file. |
10327 | Business Fax |
Business Fax |
10328 | Home Fax |
Home Fax |
10329 | Other Fax |
Other Fax |
10330 | Zip/Postal Code |
Zip/Postal Code |
10331 | Sent |
Sent |
11000 | Microsoft Access |
Microsoft Access |
11001 | MSAccess |
MSAccess |
11002 | Microsoft Access Version |
Microsoft Access Version |
11003 | Copyright (c) 1989-1999 Microsoft Corporation |
Copyright (c) 1989-1999 Microsoft Corporation |
11004 | DDTBEER |
DDTBEER |
11005 | MSAccess.exe |
MSAccess.exe |
11006 | US |
US |
11007 | Licensed to: |
Licensed to: |
11009 | Copyright (c) 1989-1999 |
Copyright (c) 1989-1999 |
11010 | Microsoft Corporation |
Microsoft Corporation |
11011 | This program is protected by US and international copyright laws as described in the About Box. |
This program is protected by US and international copyright laws as described in the About Box. |
11012 | Warning: This computer program is protected by copyright law and international treaties. |
Warning: This computer program is protected by copyright law and international treaties. |
11013 | Unauthorized reproduction or distribution of this program, or any portion of it, |
Unauthorized reproduction or distribution of this program, or any portion of it, |
11014 | may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law. |
may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law. |
11015 | Please Enter MS JET OLE DB Initialization Information |
Please Enter MS JET OLE DB Initialization Information |
11016 | Data Source: |
Data Source: |
11017 | User Name: |
User Name: |
11018 | Password: |
Password: |
11019 | Provider String: |
Provider String: |
11020 | Open Mode: |
Open Mode: |
11021 | OK |
OK |
11022 | Cancel |
Cancel |
11024 | &Yes |
&Yes |
11025 | &No |
&No |
11027 | &Help |
&Help |