rasmontr.dll.mui RAS 监视程序 DLL 5b049b4e114713eaac7a449e12901174

File name:	rasmontr.dll.mui
Size:	75776 byte
MD5:	5b049b4e114713eaac7a449e12901174
SHA1:	de1fe6722ac2813643965745defa17ffffb1af3d
SHA256:	5213f626d8ef31e5e03abaf58c2bb2934a719decf550892ce2c71739736121a8
Operating systems:	Windows 10
Extension:	MUI

If an error occurred or the following message in Chinese (Simplified) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id	Chinese (Simplified)	English
2300	显示帮助。	Displays help.
2301	用法: %1!s! 说明: 显示帮助。	Usage: %1!s! Remarks: Displays help.
2302	设置或清除一个远程访问服务器标志。	Sets or clears a Remote Access server flag.
2303	%1!s! [flag = ] flag [ [state = ] ENABLED|DISABLED ] 启用远程访问服务器标志。 要获得可用的标志列表，请参阅 ‘show rasflag’命令的 帮助 如果没有提供状态，则假定为 ENABLED。	%1!s! [flag = ] flag [ [state = ] ENABLED|DISABLED ] Enables the Remote Access server flag. For a list of available flags, see the help for 'show rasflag' command. If no state is provided, ENABLED is assumed.
2342	显示远程访问服务器标志的状态。	Displays the state of a Remote Access server flag.
2343	%1!s! [ [flag = ] flag ] 显示远程访问服务器标志的状态。如果未给定标志，则显示所有标志的状态。 flag - 要显示的服务器标志，可以是下列其中一个: UseCallbackDelay: 在回拨客户端之前延迟。 UseSwCompression: 启用软件压缩。 RequireEncryption: 要求客户端使用数据加密。 UseLcpExtensions: 使用 LCP 扩展。 NegotiateMultilink: 允许多重链接调用。 AuthenticatePeer: 启用路由器接口的相互身份验证。 RequireStrongEncryption: 要求客户端使用强加密。 NegotiateBacp: 允许 BACP 协商。 NegotiateEAP: 允许 EAP 身份验证。 NegotiatePAP: 允许 PAP 身份验证。 NegotiateMD5CHAP: 允许 MD5CHAP 身份验证。 RequireIPSEC: 请求 L2TP 调用时要求 IPsec。 DisableEncryption: 不协商数据加密。 Require56BitEncryption: 要求客户端使用 56 位加密。 UseLmPassword: 使用 LM 密码。 NegotiateStrongMSCHAP: 允许 MSCHAP 版本 2 身份验证。 NoCallback: 从不回拨	%1!s! [ [flag = ] flag ] Displays the state of the Remote Access server flag. If no flag is given, the state of all flags will be displayed. flag - The server flag to show which can be one of the following: UseCallbackDelay: Delay before calling back a client. UseSwCompression: Enable software compression. RequireEncryption: Require clients to employ data encryption. UseLcpExtensions: Use LCP extensions. NegotiateMultilink: Allow multilinked calls. AuthenticatePeer: Enable mutual auth. for router interfaces. RequireStrongEncryption: Require clients to employ strong encryption. NegotiateBacp: Allow BACP negotiation. NegotiateEAP: Allow EAP authentication. NegotiatePAP: Allow PAP authentication. NegotiateMD5CHAP: Allow MD5CHAP authentication. RequireIPSEC: Require IPsec when L2TP call is requested. DisableEncryption: Do not negotiate data encryption. Require56BitEncryption: Require clients to employ 56 bit encryption. UseLmPassword: Use LM password. NegotiateStrongMSCHAP: Allow MSCHAP version 2 authentication. NoCallback: Never callback
2344	显示身份验证模式。	Shows the authentication mode.
2345	%1!s! 显示身份验证模式。	%1!s! Shows the authentication mode.
2346	设置身份验证模式。	Sets the authentication mode.
2347	%1!s! [mode = ] STANDARD|NODCC|BYPASS 设置模式以决定是否及何时拨入客户端应该 身份验证。 mode - 模式 STANDARD - 所有设备都需要身份验证。 NODCC - 直接连接设备没有身份验证。 BYPASS - 所有设备都不用身份验证。	%1!s! [mode = ] STANDARD|NODCC|BYPASS Sets the mode that determines whether and when dialin clients should be authenticated. mode - The mode STANDARD - All devices need to be authenticated. NODCC - Direct-connect devices are not authenticated. BYPASS - Authentication is not required for any device.
2348	添加远程访问服务器要协商的身份验证类型。	Adds types of authentication the Remote Access server will negotiate.
2349	%1!s! [type = ] PAP|MD5CHAP|MSCHAPv2|EAP|CERT 选择远程访问服务器将试图协商的身份验证类型。协商从最安全 到最不安全的顺序进行。一旦客户端和服务器同意身份验证类型， PPP 将紧接在相应的 RFC 之后。 类型 - 类型 PAP - 密码身份验证协议(明文)。 MD5CHAP - 质询握手身份验证协议，使用 Message Digest 5 哈希方案对响应加密。 MSCHAPv2 - MSCHAP 版本 2。 EAP - 可扩展的身份验证协议。 CERT - IKEv2 的证书身份验证。	%1!s! [type = ] PAP|MD5CHAP|MSCHAPv2|EAP|CERT Selects the types of authentication which this Remote Access server will attempt to negotiate. Negotiation will be in the order most-secure to least-secure. Once both client and server agree upon an authentication type, the PPP negotiation will follow the appropriate RFCs. type - the type PAP - Password Authentication Protocol (clear text). MD5CHAP - Challenge Handshake Authentication Protocol using Message Digest 5 hashing scheme to encrypt the response. MSCHAPv2 - Version 2 of MSCHAP. EAP - Extensible Authentication Protocol. CERT - Certificate Authentication for IKEv2.
2350	从远程访问服务器删除一种身份验证类型。	Deletes an authentication type from the Remote Access server.
2351	%1!s! [type = ] PAP|MD5CHAP|MSCHAPv2|EAP|CERT 从远程访问服务器要协商的身份验证协议列表中删除 一种身份验证类型。 类型 - 类型 PAP - 密码身份验证协议 (明文)。 MD5CHAP - 质询握手身份验证协议，使用 Message Digest 5 哈希方案对响应加密。 MSCHAPv2 - MSCHAP 版本 2。 EAP - 可扩展的身份验证协议。 CERT - IKEv2 的证书身份验证。	%1!s! [type = ] PAP|MD5CHAP|MSCHAPv2|EAP|CERT Deletes an authentication type from the list of types that the Remote Access server will negotiate. type - the type PAP - Password Authentication Protocol (clear text). MD5CHAP - Challenge Handshake Authentication Protocol using Message Digest 5 hashing scheme to encrypt the response. MSCHAPv2 - Version 2 of MSCHAP. EAP - Extensible Authentication Protocol. CERT - Certificate Authentication for IKEv2.
2352	显示当前启用的身份验证类型。	Displays the authentication types currently enabled.
2353	%1!s! 显示当前启用的身份验证类型。	%1!s! Displays the authentication type(s) currently enabled.
2354	添加到 PPP 要协商的链接属性列表	Adds to the list of link properties PPP will negotiate
2355	%1!s! [type = ] SWC|LCP 添加到 PPP 要协商的链接列表。 类型 - 类型 SWC - 提供软件压缩(MPPC) LCP - 提供来自 PPP 集的链接控制协议扩展。	%1!s! [type = ] SWC|LCP Adds to the list of link properties PPP will negotiate. type - the type SWC - Provides software compression (MPPC) LCP - Provides Link Control Protocol extensions from the PPP suite of protocols.
2356	从 PPP 要协商的链接属性列表中删除	Deletes from the list of link properties PPP will negotiate
2357	%1!s! [type = ] SWC|LCP 从 PPP 要协商的链接属性列表中删除。 类型 - 类型 SWC - 提供软件压缩(MPPC) LCP - 从 PPP 协议集中提供链接控制协议扩展。	%1!s! [type = ] SWC|LCP Deletes from the list of link properties PPP will negotiate. type - the type SWC - Provides software compression (MPPC) LCP - Provides Link Control Protocol extensions from the PPP suite of protocols.
2358	显示 PPP 要协商的链接属性	Shows the link properties PPP will negotiate
2359	%1!s! 显示 PPP 要协商的链接属性。	%1!s! Shows the link properties PPP will negotiate.
2360	添加到 PPP 要协商的多重链接列表	Adds to the list of multilink types PPP will negotiate
2361	%1!s! [type = ] MULTI|BACP 添加到 PPP 要协商的多重链接列表。 类型 - 类型 MULTI - 提供多重链接 PPP 会话。 BACP - 提供带宽分配控制协议。	%1!s! [type = ] MULTI|BACP Adds to the list of multilink types PPP will negotiate. type - the type MULTI - Provides multilink PPP sessions. BACP - Provides Bandwidth Allocation Control Protocol.
2362	从 PPP 要协商的多重链接列表中删除	Deletes from the list of multilink types PPP will negotiate
2363	%1!s! [type = ] MULTI|BACP 从 PPP 要协商的多重链接列表中删除。 类型 - 类型 MULTI - 提供多重链接 PPP 会话。 BACP - 提供带宽分配控制协议。	%1!s! [type = ] MULTI|BACP Deletes from the list of multilink types PPP will negotiate. type - the type MULTI - Provides multilink PPP sessions. BACP - Provides Bandwidth Allocation Control Protocol.
2364	显示 PPP 要协商的多重链接	Shows the multilink types PPP will negotiate
2365	%1!s! 显示 PPP 要协商的多重链接。	%1!s! Shows the multilink types PPP will negotiate.
2366	设置服务器的配置状态。	Sets the configuration state of the server.
2367	%1!s! [confstate=] ENABLED|DISABLED 设置服务器的配置状态。 confstate - 服务器的新状态: ENABLED - 启用服务器。 DISABLED - 禁用服务器并删除配置。	%1!s! [confstate=] ENABLED|DISABLED Sets the configuration state of the server. confstate - The new state of the server : ENABLED - Enable the server. DISABLED - Disable the server and remove configurations.
2368	显示服务器的配置状态。	Shows the configuration state of the server.
2369	%1!s! 显示服务器的配置状态。	%1!s! Shows the configuration state of the server.
2370	设置计算机的路由器和 RAS 功能。	Sets the Router and RAS functionalities of the computer.
2371	%1!s! [ipv4rtrtype=] lanonly | lananddd | none [ipv6rtrtype=] lanonly | lananddd | none [rastype=] IPV4 | IPV6 | BOTH | NONE 设置计算机的路由器和 RAS 功能。 ipv4rtrtype - 是否将此计算机配置为 IPv4 路由器。 LANONLY - 指定此计算机是仅局域网路由器， 不需要请求拨号或 VPN 连接。 LANANDDD - 指定此计算机是局域网和请求拨号 路由器并支持 VPN 连接。 NONE - 指定此计算机不能用作 IPv4 路由器。 ipv6rtrtype - 是否将此计算机配置为 IPv6 路由器。 LANONLY - 指定此计算机仅是局域网路由器， 不需要请求拨号或 VPN 连接。 LANANDDD - 指定此计算机是局域网和请求拨号 路由器并支持 VPN 连接。 NONE - 指定此计算机不能用作 IPv6 路由器。 rastype - 是否将此计算机配置为远程访问服务器。 IPV4 - 针对 IPv4 配置。 IPV6 - 针对 IPv6 配置。 BOTH - 针对 IPv4 和 IPv6 配置。 NONE - 不配置为远程访问服务器。	%1!s! [ipv4rtrtype=] lanonly | lananddd | none [ipv6rtrtype=] lanonly | lananddd | none [rastype=] IPv4 | IPv6 | BOTH | NONE Sets the Router and RAS functionalities of the computer. ipv4rtrtype - Whether this computer is configured as IPv4 Router. LANONLY - Specifies that this computer is a LAN - only router and does not require Demand Dial or VPN connections. LANANDDD - Specifies that this computer is a LAN and Demand Dial router and supports VPN connections. NONE - Specifies that this computer is not enabled as a IPv4 router. ipv6rtrtype - Whether this computer is configured as IPv6 Router. LANONLY - Specifies that this computer is a LAN - only router and does not require Demand Dial or VPN connections. LANANDDD - Specifies that this computer is a LAN and Demand Dial router and supports VPN connections. NONE - Specifies that this computer is not enabled as a IPv6 router. rastype - Whether this computer is configured as Remote Access Server. IPv4 - Configured for IPv4. IPv6 - Configured for IPv6. BOTH - Configured for both IPv4 and IPv6. NONE - Not configured as a Remote Access Server.
2372	显示计算机的路由器和 RAS 功能。	Shows the Router and RAS functionalities of the computer.
2373	%1!s!\ 显示计算机的路由器和 RAS 功能。	%1!s!\ Shows the Router and RAS functionalities of the computer.
2374	显示路由和远程访问服务器的状态。	Shows the status of the Routing and Remote Access Server.
2375	%1!s! 显示路由和远程访问服务器的状态	%1!s! Shows the status of a Routing and Remote Access Server
2376	重置统计信息或断开远程访问客户端的连接。	Reset the statistics or disconnect a Remote Access Client.
2377	%1!s! [name=] [state=] disconnect | resetstats name - 要断开连接或重置统计信息的客户端的用户名 state - 要执行的操作 disconnect - 断开指定用户的连接 resetstats - 重置指定用户的统计信息	%1!s! [name=] [state=] disconnect | resetstats name - The user name of the client to disconnect or reset statistics state - Action to perform disconnect - Disconnect the specified user resetstats - Reset the statistics for the specified user
2382	显示 RAS 端口的当前状态。	Shows the current status of RAS ports.
2383	%1!s! [ name= ] [ state= ] 显示 RAS 端口的当前状态。 name - 要显示其状态的端口的名称 state - 显示具有指定状态的端口: nonoperational - 非操作端口 disconnected - 断开连接的端口 callingback - 回呼的端口 listening - 侦听的端口 authenticating - 验证的端口 connected - 已通过验证并已连接的端口 initializing - 初始化的端口 示例: netsh ras show portstatus name=VPN0-127 netsh ras show portstatus state=connected \	%1!s! [ name= ] [ state= ] Shows the current status of RAS ports. name - Name of the port whose status to display state - Display ports with the specified state : nonoperational - Non operational ports disconnected - Disconnected ports callingback - Ports calling back listening - Ports listening authenticating - Ports authenticating connected - Authenticated and connected ports initializing - Ports initializing Example: netsh ras show portstatus name=VPN0-127 netsh ras show portstatus state=connected \
2384	重置 RAS 端口的统计信息。	Resets the statistics information of RAS ports.
2385	%1!s! [ [name=] ] 重置 RAS 端口的统计信息。 name - 端口名称。如果未指定任何名称，则重置所有活动端口的 统计信息。	%1!s! [ [name=] ] Resets the statistics information of RAS ports. name - Name of the port. If none specified, resets statistics of all active ports.
2386	显示为 RAS WAN 端口设置的选项。	Shows the options set for RAS WAN ports.
2387	%1!s! [ [device=] ] 显示为 RAS WAN 端口设置的选项。 devicename - 端口的设备名称 示例: netsh ras show wanports netsh ras show wanports device="WAN Miniport (PPTP)"	%1!s! [ [device=] ] Shows the options set for a RAS WAN port. devicename - The device name of the port Example: netsh ras show wanports netsh ras show wanports device="WAN Miniport (PPTP)"
2388	设置 RAS WAN 端口选项。	Sets the RAS WAN ports options.
2389	%1!s! [device=] [ [rasinonly=] enabled | disabled ] [ [ddinout=] enabled | disabled ] [ [ddoutonly=] enabled | disabled ] [ [phone=] ] [ [maxports=] ] 设置 RAS WAN 端口选项。 设备 - 端口的设备名称 rasinonly - 入站远程访问连接 ddinout - 请求拨号入站/出站路由连接 ddoutonly - 请求拨号出站路由连接 电话 - 设备的电话号码。这将是采用电话号码或 VPI/VCI 或 IP 地址值的 字符串 maxports - 设备的最大端口号 示例: netshras set wanports device="WAN Miniport (PPTP)" rasinonly = enabled ddinout = enabled ddoutonly = disabled phone ="33525552" maxports=20 netshras set wanports device="Standard 56000 bps Modem" rasinonly = disabled ddinout = enabled ddoutonly = disabled phone="9140559676"	%1!s! [device=] [ [rasinonly=] enabled | disabled ] [ [ddinout=] enabled | disabled ] [ [ddoutonly=] enabled | disabled ] [ [phone=] ] [ [maxports=] ] Sets the RAS WAN ports options. device - The device name of the port rasinonly - Inbound remote access connection ddinout - Demand dial in/outbound routing connection ddoutonly - Demand dial outbound routing connection phone - Phone number for the device. This will be a string taking phone number or VPI/VCI or IP address value maxports - Maximum number of ports for the device Example: netshras set wanports device="WAN Miniport (PPTP)" rasinonly = enabled ddinout = enabled ddoutonly = disabled phone ="33525552" maxports=20 netshras set wanports device="Standard 56000 bps Modem" rasinonly = disabled ddinout = enabled ddoutonly = disabled phone="9140559676"
2390	设置 IKEv2 连接的空闲超时和网络中断时间值。	Sets the idle timeout and network outage time values for IKEv2 connections.
2391	%1!s! [ [idletimeout=] ] [ [nwoutagetime=] ] 设置 IKEv2 客户端连接的空闲超时和网络中断时间值。 idletimeout - 指定 IKEv2 客户端连接的空闲超时(分钟)。 客户端计算机处于空闲状态时，此值用于断开 IKEv2 连接。 (最短 5 分钟，最长 2879 分钟(不到 48 小时)) nwoutagetime - 指定 IKEv2 客户端连接的网络中断时间值(分钟)。 (最短 2 分钟)	%1!s! [ [idletimeout=] ] [ [nwoutagetime=] ] Sets the idle timeout and network outage time values for IKEv2 client connections. idletimeout - Specify the idle timeout in minutes for IKEv2 client connections. This value is used to disconnect IKEv2 connections in case the client machine is idle. (minimum - 5 mins,maximum - 2879 mins(less than 48 hours)) nwoutagetime - Specify the network outage time value in minutes for IKEv2 client connections.(minimum 2 minutes)
2392	设置 IKEv2 安全关联的过期控制。	Sets the IKEv2 Security Association's expiration controls.
2393	%1!s! [ [saexpirytime=] ] [ [sadatasizelimit=] ] 设置 IKEv2 安全关联的过期控制。 saexpirytime - 设置 IKEv2 客户端连接的 SA 过期值(分钟)。 (最短 5 分钟，最长 2879 分钟(不到 48 小时)) sadatasizelimit - 指定 SA 数据大小限制(MB)。(最小 1 MB)	%1!s! [ [saexpirytime=] ] [ [sadatasizelimit=] ] Sets the IKEv2 Security Association's expiration controls. saexpirytime - Specify the SA expiry value in minutes for IKEv2 client connections. (minimum - 5 mins,maximum - 2879 mins(less than 48 hours)) sadatasizelimit - Specify the SA datasize limit in MB.(minimum 1 MB)
2394	设置基于 IKEv2 的远程访问客户端的移动支持。	Sets the mobility support of IKEv2 based remote access clients.
2395	%1!s! [mode=] ENABLED | DISABLED 设置基于 IKEv2 的远程访问客户端的移动支持。 mode - 指定对基于 IKEv2 的远程访问客户端连接 启用/禁用移动支持的模式。 ENABLED - 支持远程访问客户端的移动 DISABLED - 不支持远程访问客户端的移动	%1!s! [mode=] ENABLED | DISABLED Sets the mobility support of IKEv2 based remote access clients. mode - Specify the mode to enable/disable mobility support for IKEv2 based remote access client connections. ENABLED - Support mobility of remote access clients DISABLED - Does not support mobility of remote access clients
2396	显示 IKEv2 连接的空闲超时和网路中断时间值。	Shows the idle timeout and network outage time values for IKEv2 connections.
2397	显示 IKEv2 客户端连接的空闲超时和网络中断时间值。 idletimeout - 显示 IKEv2 客户端连接的空闲超时(分钟)。 此值用于在客户端计算机处于空闲状态时 断开 IKEv2 连接。 nwoutagetime - 显示 IKEv2 客户端连接的网络中断时间值(分钟)。	Shows the idle timeout and network outage time values for IKEv2 client connections. idletimeout - Shows the idle timeout in minutes for IKEv2 client connections. This value is used to disconnect IKEv2 connections in case the client machine is idle. nwoutagetime - Shows the network outage time value in minutes for IKEv2 client connections.
2398	显示 IKEv2 安全关联的过期控制。	Shows the IKEv2 Security Association's expiration controls.
2399	显示 IKEv2 安全关联的过期控制。 saexpirytime - 显示 IKEv2 客户端连接的 SA 过期值(分钟)。 sadatasizelimit - 显示 SA 数据大小限制(MB)。	Shows the IKEv2 Security Association's expiration controls. saexpirytime - Shows the SA expiry value in minutes for IKEv2 client connections. sadatasizelimit - Shows the SA datasize limit in MB.
2400	显示基于 IKEv2 的远程访问客户端的移动支持。	Shows the mobility support of IKEv2 based remote access clients.
2401	显示基于 IKEv2 的远程访问客户端的移动支持。 ENABLED - 支持远程访问客户端的移动 DISABLED - 不支持远程访问客户端的移动	Shows the mobility support of IKEv2 based remote access clients. ENABLED - Support mobility of remote access clients DISABLED - Does not support mobility of remote access clients
2402	为用户显示远程访问属性。	Displays Remote Access properties for a user(s).
2403	%1!s! [ [name = ] username [mode = ] PERMIT|REPORT ] 显示用户远程访问属性。 username - 用户的登录名称。如果没有提供， 将显示所有用户。 mode - 显示信息的模式。没有指定模式 将使用 REPORT。 REPORT - 显示所有用户。 PERMIT - 只显示拨入权限为 PERMIT 的用户。	%1!s! [ [name = ] username [mode = ] PERMIT|REPORT ] Displays user Remote Access properties. username - the user's logon name. If none is supplied, all users will be displayed. mode - the mode for showing information. If no mode is specified, REPORT is assumed. REPORT - show all users. PERMIT - show only users whose dial in permission is PERMIT
2422	%1!s! [name = ] username [dialin = ] PERMIT|DENY|POLICY [ [cbpolicy = ] NONE|CALLER|ADMIN [cbnumber = ] callback number ] 设置用户的远程访问属性。 username - 用户的登录名称。 dialin - 是否允许用户拨入。 PERMIT - 允许用户拨入。 DENY - 不允许用户拨入。 POLICY - 使用远程访问规则确定拨入。 cbpolicy - 用户的回拨规则。回拨 功能是呼叫方节省了 电话费用。 NONE - 不允许用户使用回拨。 CALLER - 在呼叫时用户可以指定回拨号码 ADMIN - 始终使用用户的回拨号码。 cbnumber - 当 cbpolicy 为 ADMIN 时使用的号码。 注意: 选项 'POLICY' 对混合模式域的用户来说 不可用。对于这些用户，'POLICY' 定义为和 'DENY' 的意义一样。	%1!s! [name = ] username [dialin = ] PERMIT|DENY|POLICY [ [cbpolicy = ] NONE|CALLER|ADMIN [cbnumber = ] callback number ] Sets user Remote Access properties. username - the user's logon name. dialin - whether the user will be allowed to dial in PERMIT - allow the user to dial in. DENY - do not allow the user to dial in. POLICY - use remote access policies to determine dialin. cbpolicy - the callback policy of the user. The callback feature is used to save the caller the cost of the phone call. NONE - callback is not allowed for the user CALLER - user can specify callback number at call time ADMIN - always call the user at the callback number cbnumber - the number to use when cbpolicy is ADMIN NOTE: The 'POLICY' option is not available for users that belong to a mixed-mode domain. For these users, 'POLICY' is assumed to mean 'DENY'.
2423	设置当前 SSTP 证书配置	Sets the current SSTP Certificate configuration
2424	%1!s! [[name=] certname] [[hash=] hash] 设置当前的 SSTP 证书配置。 name - 指定应由 SSTP 使用的证书名 hash - 指定应由 SSTP 使用的证书的 SHA-1 哈希 示例: 以下命令将 SSTP 设置为使用以证书命名的 Verisign netsh rasset sstp-ssl-cert name=VeriSign 或者 以下命令将 SSTP 证书配置重置为默认值 netsh rasset sstp-ssl-cert name=default 或者 以下命令将 SSTP 设置为使用的提供哈希的证书 netsh rasset sstp-ssl-cert hash=4463c531d7ccc1006794612bb656d3bf8257846f	%1!s! [[name=] certname] [[hash=] hash] Set the current SSTP Certificate configuration. name - Specify the certificate name which should be used by SSTP hash - Specify the SHA-1 hash of the certificate which should be used by SSTP Example: Below Command set the SSTP to use certificate named Verisign netsh rasset sstp-ssl-cert name=VeriSign OR Below Cmmand reset the SSTP Certificate configuration to default netsh rasset sstp-ssl-cert name=default OR Below Cmmand set the SSTP to used certificate whose hash is provided netsh rasset sstp-ssl-cert hash=4463c531d7ccc1006794612bb656d3bf8257846f
2425	显示当前 SSTP 证书配置	Shows the current SSTP Certificate configuration
2426	显示当前 SSTP 证书配置 友好名称 - 证书友好名称 显示名称 - 显示友好名称 颁发着 - 证书由此机构颁发 到期时间戳 - 证书在此时间戳之前有效	Shows the current SSTP Certificate configuration Friendly name - Certificate Friendly name Display name - Display Friendly name Issuer - Certificate is issued by this authority Expiry timestamp - Certificate is valid till this timestamp
2461	将给定的 Windows 计算机注册为给定域中 Active Directory 中的远程访问 服务器。	Registers the given Windows computer as a Remote Access server in the Active Directory of the given domain.
2462	%1!s! [ [domain = ] domain [server = ] server ] 把给定的 Windows 计算机注册成给定域的 Active Directory 中的远程访问服务器。 server - 注册成远程访问服务器的计算机名。 如果没有指定计算机名，则假设是 发出此命令的计算机。 domain - 给出的服务器注册在的域。如果没 有指定域，则假设是发出此命令的 计算机所在的域。	%1!s! [ [domain = ] domain [server = ] server ] Registers the given Windows computer as a Remote Access server in the Active Directory of the given domain. server - the computer name of the computer to be registered as a Remote Access server. If no server is specified the computer from which the command is issued is assumed. domain - the domain in which the given server should be registered. If no domain is provided, the primary domain of the computer from which the command is issued is assumed.
2481	把给定的 Windows 计算机取消注册为在给定的域中的 Active Directory 中的远程访问服务器。	Un-registers the given Windows computer as a Remote Access server in the Active Directory of the given domain.
2482	%1!s! [ [domain = ] domain [server = ] server ] 把给定的 Windows 计算机取消注册成给定域的 Active Directory 中的远程访问服务器。 server - 注册成远程访问服务器的计算机名。 如果没有指定计算机名，则假设是 发出此命令的计算机。 domain - 给出的服务器注册在的域。如果没 有指定域，则假设是发出此命令的 计算机所在的域。	%1!s! [ [domain = ] domain [server = ] server ] Un-registers the given Windows computer as a Remote Access server in the Active Directory of the given domain. server - the computer name of the computer to be unregistered as a Remote Access server. If no server is specified the computer from which the command is issued is assumed. domain - the domain in which the given server should be unregistered. If no domain is provided, the primary domain of the computer from which the command is issued is assumed.
2541	显示计算机是否注册为在给定的域中的 Active Directory 中的远程访问服务器。	Displays whether a computer is registered as a Remote Access server in the Active Directory of the given domain.
2542	%1!s! [ [domain = ] domain [server = ] server ] 显示给定的计算机是否在给定的域中 注册为远程访问服务器 server - 有疑问的那台计算机的名称。 如果没有指定服务器，则会使用发出指令的 那台计算机的主要域。 domain - 该域。如果提供了域，则会使用发出 指令的那台计算机的主要域。	%1!s! [ [domain = ] domain [server = ] server ] Displays whether the given computer is registered as a Remote Access server in the given domain. server - the computer name of the computer in question. If no server is specified the computer from which the command is issued is assumed. domain - the domain. If no domain is provided, the primary domain of the computer from which the command is issued is assumed.
3201	转储远程访问配置信息为脚本格式。	Dumps Remote Access configuration info in script form.
3202	%1!s! 将远程访问配置转储为脚本格式。	%1!s! Dumps Remote Access configuration information in script form.
3292	设置配置信息。	Sets configuration information.
3293	显示信息。	Displays information.
3294	启动选项。	Enables options.
3295	禁用选项。	Disables options.
3298	将项目添加到表。	Adds items to a table.
3299	将项目从表中删除。	Removes items from a table.
3301	听远程访问服务器广告。	Listens for Remote Access server advertisements.
3302	%1!s! 听远程访问服务器广告。	%1!s! Listens for Remote Access server advertisements.
3325	显示连接到此计算机的远程访问客户端及其状态。	Shows Remote Access clients connected to this machine and their status.
3326	%1!s! [[name=]] 显示连接到此机器的远程访问客户端或这些客户端的状态。 参数 None - 显示连接到此机器的远程访问客户端。 name - 显示连接到此机器的指定客户端的状态。 如果此参数为 "*"，则枚举所有客户端的状态。	%1!s! [[name=]] Shows Remote Access clients connected to this machine or their status. Parameters None - Shows Remote Access clients connected to this machine. name - Shows the status of a given client connected to the machine. If this parameter is "*" , enumerates status of all clients.
4501	# ----------------------------------------- # 远程访问配置 # -----------------------------------------	# ----------------------------------------- # Remote Access Configuration # -----------------------------------------
4502	# 远程访问配置结束。	# End of Remote Access configuration.
4503	时间戳 发送方 ------------------------ ----------------------------------	Timestamp Sender ------------------------ ----------------------------------
5001	用户名: %1!s! 拨入: %2!s! 回拨策略: %3!s! 回拨号码: %4!s!	User name: %1!s! Dialin: %2!s! Callback policy: %3!s! Callback number: %4!s!
5003	%1!s! %2!s! %3!s! %4!s! %5!s!	%1!s! %2!s! %3!s! %4!s! %5!s!
5200	成功地完成了注册: 远程访问服务器: %1!s! 域: %2!s!	Registration completed successfully: Remote Access Server: %1!s! Domain: %2!s!
5201	注册失败: 远程访问服务器: %1!s! 域: %2!s!	Registration FAILED: Remote Access Server: %1!s! Domain: %2!s!
5202	取消注册成功完成: 远程访问服务器: %1!s! 域: %2!s! 由于用户帐户被 'IAS' 和 'Routing and Remote Access' 服务缓存，此取消注册只有在这些服务重新启动后才生效。	Un-registration completed successfully: Remote Access Server: %1!s! Domain: %2!s! Since user accounts are cached by the 'IAS' and 'Routing and Remote Access' services, this un-registration will not take effect until these services are restarted.
5203	取消注册失败: 远程访问服务器: %1!s! 域: %2!s!	Un-registration FAILED: Remote Access Server: %1!s! Domain: %2!s!
5208	注册了下列远程访问服务器: 远程访问服务器: %1!s! 域: %2!s!	The following Remote Access server is registered: Remote Access Server: %1!s! Domain: %2!s!
5209	没有注册下列远程访问服务器: 远程访问服务器: %1!s! 域: %2!s!	The following Remote Access server is not registered: Remote Access Server: %1!s! Domain: %2!s!
5211	无法决定注册: 远程访问服务器: %1!s! 域: %2!s!	Unable to determine the registration: Remote Access Server: %1!s! Domain: %2!s!
5401	%1!s! %2!s! %3!s! %4!s!	%1!s! %2!s! %3!s! %4!s!
5402	%1!s! %2!s!	%1!s! %2!s!
5407	authentication mode = standard	authentication mode = standard
5408	authentication mode = nodcc	authentication mode = nodcc
5410	authentication mode = bypass	authentication mode = bypass
5411	启用的身份验证类型: 代码 含义 ------------------------------------------	Enabled Authentication Types: Code Meaning ------------------------------------------
5412	PAP 密码身份验证协议。	PAP Password Authentication Protocol.
5413	CERT IKEv2 的计算机证书身份验证。	CERT Machine certificate authentication for IKEv2.
5414	MD5CHAP 质询握手身份验证协议(MD5)。	MD5CHAP Challenge Handshake Authentication Protocol (MD5).
5416	MSCHAPv2 Microsoft 质询握手身份验证协议 版本 2。	MSCHAPv2 Microsoft Challenge-Handshake Authentication Protocol version 2.
5417	EAP 可扩展的身份验证协议。	EAP Extensible Authentication Protocol.
5418	启用的链接选项: 代码 含义 ------------------------------------------	Enabled Link Options: Code Meaning ------------------------------------------
5419	SWC 提供软件压缩(MPPC)。	SWC Provides software compression (MPPC).
5420	LCP 从 PPP 协议提供链接控制协议扩展。	LCP Provides Link Control Protocol extensions from the PPP suite of protocols.
5421	启用的多重链接选项: 代码 含义 ------------------------------------------	Enabled Multilink Options: Code Meaning ------------------------------------------
5422	MULTI 提供多重链接 PPP 会话。	MULTI Provides multilink PPP sessions.
5423	BACP 提供带宽分配控制协议。	BACP Provides Bandwidth Allocation Control Protocol.
5424	服务器配置状态 --------------------------	Server Configuration State --------------------------
5425	服务器 : %1!s! 配置 : ENABLED	Server : %1!s! Configuration : ENABLED
5426	服务器 : %1!s! 配置 : DISABLED	Server : %1!s! Configuration : DISABLED
5427	路由和远程访问服务器常规属性 --------------------------------------------	Routing and Remote Access Server Properties --------------------------------------------
5428	仅局域网路由	LAN routing only
5429	局域网和按需拨号路由	LAN and demand-dial routing
5430	未启用	Not Enabled
5431	IPv4 路由器 :	IPv4 Router :
5432	IPv6 路由器 :	IPv6 Router :
5433	IPv4 远程访问服务器 :	IPv4 Remote Access Server :
5434	IPv6 远程访问服务器 :	IPv6 Remote Access Server :
5435	无	None
5436	必须指定希望路由和远程访问服务 执行的功能(LAN 路由、请求拨号路由或远程访问)。	You must specify what functions you want the Routing and Remote Access service to perform (LAN routing, Demand-dial routing, or Remote Access).
5437	已启用	Enabled
5438
5439	服务器状态 -------------- 服务器名称 : %1!s! 服务器类型 :	Server Status -------------- Server Name : %1!s! Server Type :
5440	(%1)	(%1)
5441	Microsoft Windows NTW %1 %2	Microsoft Windows NTW %1 %2
5442	Microsoft Windows NTS %1 %2	Microsoft Windows NTS %1 %2
5443	%1 服务器 %2	%1 Server %2
5444	%1 Pro %2	%1 Pro %2
5445	服务器状态 : 已启动	Server State : Started
5446	服务器状态 : 已停止	Server State : Stopped
5447	服务器状态 : 已暂停	Server State : Paused
5448	服务器状态 : 未知	Server State : Uknown
5449	服务器状态 : 拒绝访问	Server State : Access denied
5450	(未配置)	(Unconfigured)
5451	使用的端口 : %1!s! 端口总数 : %2!s! 运行时间(D:H:M) : %3!s!	Ports In Use : %1!s! Total Ports : %2!s! Up Time (D:H:M) : %3!s!
5452	服务器状态 : 正在启动	Server State : Starting
5453	服务器状态 : 正在停止	Server State : Stopping
5454	服务器状态 : 正在暂停	Server State : Pausing
5455	请手动启动路由和远程访问服务。	Please manually start the Routing and Remote Access Service.
5456	请手动停止路由和远程访问服务。	Please manually stop the Routing and Remote Access Service.
5457	端口状态 ===========	Port Status ===========
5458	设备 : %1!s! (%2!s!) 条件 : %3!s! 线路速度(bps) : %4!-12d! 持续时间 : %5!d! 天、%6!d! 小时、%7!d! 分钟 输入字节 : %8!-12d! 输出字节 : %9!d! CRC 错误 : %10!-12d! 帧错误 : %11!d! 超时 : %12!-12d! 硬件溢出 : %13!d! 校准 : %14!-12d! 缓冲区溢出 : %15!d! IP 地址 : %16!s! IPv6 前缀 : %17!s! IPv6 地址 : %18!s! NetBEUI 名称 : %19!s!	Device : %1!s! (%2!s!) Condition : %3!s! Line bps : %4!-12d! Duration : %5!d! Days, %6!d! Hrs, %7!d! Mins Bytes In : %8!-12d! Bytes Out : %9!d! CRC Errors : %10!-12d! Framing Errors : %11!d! Time Out : %12!-12d! Hardware Overruns : %13!d! Alignment : %14!-12d! Buffer Overruns : %15!d! IP Address : %16!s! IPv6 Prefix : %17!s! IPv6 Address : %18!s! NetBEUI name : %19!s!
5459	不可操作	Non operational
5460	已断开连接	Disconnected
5461	正回拨	Calling Back
5462	正接听	Listening
5463	正在进行身份验证	Authenticating
5464	已经过身份验证	Authenticated
5465	正在初始化	Initializing
5466	IKEv2 客户端连接控制: 空闲超时(分钟) : %1!d! 网络中断时间(分钟) : %2!d!	IKEv2 client connection control: Idle Timeout (minutes) : %1!d! Network Outage Time (minutes) : %2!d!
5467	IKEv2 安全关联(SA)过期控制: 过期值(分钟) : %1!d! 数据大小限制(MB) : %2!d!	IKEv2 Security Association (SA) expiration control: Expiry Time (minutes) : %1!d! Datasize Limit (MB) : %2!d!
5468	%1!s! %2!s! %3!s!	%1!s! %2!s! %3!s!
5470	SSTP 当前证书配置为: 友好名称: %1!s! 显示名称: %2!s! 颁发者 : %3!s! 到期 : %4!s!	SSTP current certficate configuration is : Friendly Name : %1!s! Display Name : %2!s! Issuer : %3!s! Expiration : %4!s!
5471	SSTP 当前证书配置为默认配置	SSTP current certficate configuration is the default configuration
5473	用于安全套接字隧道协议(SSTP)的证书的指纹(证书哈希)不同于绑定到 Web 侦听器(HTTP.sys)的证书。将 SSTP 配置为使用默认证书或绑定到 SSL 的证书。你可以将 Web 服务器应用程序配置为使用 SSTP 所用的同一证书	The thumbprint (cert hash) of the certificate used for Secure Socket Tunneling Protocol (SSTP) is different than the certificate bound to the Web listener (HTTP.sys). Configure SSTP to use the default certificate or the certificate bound to SSL. You can configure web server applications to use the same certificate used by SSTP
5474	缺少用于安全套接字隧道协议(SSTP)的证书。你应该为 SSTP 配置一个新证书，或者使用默认配置	The certificate used for Secure Socket Tunneling Protocol (SSTP) is missing. You should configure a new certificate for SSTP or use default configuration
5477	用户: %1!s! 域: %2!s! 连接来源: %3!s! 持续时间: %4!d! 天 %5!d! 小时 %6!d! 分 %7!d! 秒 限制状态: %8!s!	User: %1!s! Domain: %2!s! Connected from: %3!s! Duration: %4!d! days %5!d! hours %6!d! mins %7!d! secs Restriction state: %8!s!
5478	客户端状态 ============= 连接 : %1!s! 持续时间 : %2!d! 天 %3!d! 小时 %4!d! 分钟 %5!d! 秒 限制状态 : %6!s! 统计信息 ---------- 输入字节 : %7!-12d! 输出字节 : %8!-12d! 输入的帧 : %9!-12d! 输出的帧 : %10!-12d! 压缩输入 : %11!-2d!%% 压缩输出 : %12!-2d!%% 错误 ------ CRC : %13!-12d! 帧 : %14!-12d! 超时 : %15!-12d! 硬件溢出 : %16!-12d! 校准 : %17!-12d! 缓冲区溢出 : %18!-12d! 网络注册 -------------------- IP 地址 : %19!s! IPv6 前缀 : %20!s! IPv6 地址 : %21!s! NetBEUI 名称: %22!s!	Client Status ============= Connection : %1!s! Duration : %2!d! Days %3!d! Hours %4!d! Mins %5!d! secs Restriction state : %6!s! Statistics ---------- Bytes In : %7!-12d! Bytes out : %8!-12d! Frames in : %9!-12d! Frames out : %10!-12d! Compression in : %11!-2d!%% Compression out : %12!-2d!%% Errors ------ CRC : %13!-12d! Framing : %14!-12d! Time-out : %15!-12d! Hardware Overruns : %16!-12d! Alignment: %17!-12d! Buffer Overruns : %18!-12d! Network Registration -------------------- IP Address : %19!s! IPv6 Prefix : %20!s! IPv6 Address: %21!s! NetBEUI name: %22!s!
5479	不能枚举远程访问客户端。	Unable to enumerate the Remote Access clients.
5480	找不到客户端。	No client found.
5481	%1!s! %2!s! (%3!s!)	%1!s! %2!s! (%3!s!)
5482	%1!s!	%1!s!
5490	Wan 端口属性 ------------------	Wan Ports Property ------------------
5491	设备 : %1!s!	Device : %1!s!
5492	用于 :	Used for :
5493	远程访问连接(仅限于入站)	Remote Access connections (inbound only)
5494	请求拨号路由连接(入站和出站)	Demand-dial routing connections (inbound and outbound)
5495	请求拨号路由连接(仅限出站)	Demand-dial routing connections (outbound only)
5496	电话号码 : %1!s!	Phone number : %1!s!
5497	最大端口数 : %1!d!	Maximum ports : %1!d!
5498	5499	5499
5500	%1!s! %2!s! %3!s! %4!s! %5!s! %6!s! %7!s!	%1!s! %2!s! %3!s! %4!s! %5!s! %6!s! %7!s!
5501	%1!s! %2!s! %3!s! %4!s! %5!s! %6!s!	%1!s! %2!s! %3!s! %4!s! %5!s! %6!s!
5503	在读取安全套接字隧道协议(SSTP)使用的证书时出错。 错误为: %1!d!	There was an error when reading the certificate used for Secure Socket Tunneling Protocol (SSTP). Error: %1!d!
10002	一个或多个基本参数没有指定。	One or more essential parameters are not specified.
10003	%1!s! 不是 %2!s! 的可接受值。	%1!s! is not an acceptable value for %2!s!.
10004	无法枚举用户:	Unable to enumerate the users:
10008	要设置管理回拨模式，你必须指定 一个回拨号码，或用户必须已经有已设置的号码。	In order to set administrative callback mode, either you must specify a callback number or the user must already have a callback number set.
10011	无法枚举端口。	Unable to enumerate Ports.
10012	无法找到指定端口 : %1!s!	Unable to find the specified port : %1!s!
10013	无法重置端口 %1!s! (%2!s!)。	Unable to reset port %1!s! (%2!s!).
10014	无法找到指定的设备: %1!s!	Unable to find the specified device : %1!s!
10015	参数“%1!s!”的值无效。	Value for the parameter "%1!s!" is invalid.
20002	用法: %1!s! 显示帮助。	Usage: %1!s! Displays help.
20003	以脚本格式转储远程访问 IP 配置信息。	Dumps Remote Access IP configuration info in script form.
20005	设置远程访问服务器为其客户端 分配 IP 地址的方法。	Sets the method by which the Remote Access server assigns IP addresses to its clients.
20006	%1!s! [method = ] AUTO|POOL 设置远程访问服务器给其客户端指派 IP 地址的方法。 method - 使用的方法 AUTO - 自动通过 DHCP 指派 IP 地址。如果没有 DHCP 服务器，则随机指派专用地址。 POOL - 从远程访问服务器的池中指派 IP 地址。	%1!s! [method = ] AUTO|POOL Sets the method by which the Remote Access server assigns IP addresses to its clients. method - the method to use AUTO - automatically assigns IP addresses using DHCP. If no DHCP server is available, a random, private address is assigned. POOL - assigns IP address from the Remote Access server's pool.
20011	设置客户端是否可以申请自己的 IP 地址。	Sets whether clients can request their own IP addresses.
20012	%1!s! [mode = ] ALLOW|DENY 指定拨入客户端是否可以申请自己的 IP 地址。 mode - 模式 ALLOW - 允许客户端申请自己的 IP 地址。 DENY - 不允许客户端申请自己的 IP 地址。	%1!s! [mode = ] ALLOW|DENY Specifies whether dialin clients are permitted to request their own IP addresses. mode - the mode ALLOW - allow clients to request their own IP addresses. DENY - don't allow clients to request their own IP addresses.
20013	设置客户端是否可以访问远程访问服务器之外的资源。	Sets whether clients are given access beyond the remote access server.
20014	用法: %1!s! [mode = ] ALL|SERVERONLY 参数: mode - 授予哪种访问 ALL - 客户端可以到达远程访问服务器和它连接到的任何网络。 SERVERONLY - 客户端只可到达远程访问服务器。 说明: 指定来自任何客户端 IP 网络流量是否转移到远程访问服务器连接到的网络。	Usage: %1!s! [mode = ] ALL|SERVERONLY Parameters: mode - what type of access to grant ALL - clients are able to reach the remote access server and any networks to which it is connected. SERVERONLY - clients are able to reach the remote access server only. Remarks: Specifies whether IP network traffic from any client is forwarded to the network(s) to which the remote access server is connected.
20015	显示当前远程访问 IP 配置。	Displays current Remote Access IP configuration.
20016	%1!s! 显示当前远程访问 IP 配置。	%1!s! Displays current Remote Access IP configuration.
20017	设置客户端远程访问连接的 IP 是否协商。	Sets whether IP is negotiated for client Remote Access connections.
20018	%1!s! [mode = ] ALLOW|DENY 指定远程访问服务器是否允许 IP 配置接受的任何客户端连接。 mode - 模式 ALLOW - 允许 NBF 配置客户端连接。 DENY - 不允许 NBF 配置客户端连接。	%1!s! [mode = ] ALLOW|DENY Specifies whether the Remote Access server will allow IP to be configured for any client connections it accepts. mode - the mode ALLOW - permit IP over client connections. DENY - do not permit IP over client connections.
20019	在静态 IP 地址池中添加一个范围。	Adds a range to the static IP address pool.
20020	%1!s! [from = ] from [to = ] to 添加远程访问服务器使用的静态 IP 地址池范围。 from - 起始 IP 地址，格式为: 'x.x.x.x' to - 结束 IP 地址，格式为: 'x.x.x.x'	%1!s! [from = ] from [to = ] to Adds a range to the static IP address pool that the Remote Access server uses. from - the starting IP address in the range in the form 'x.x.x.x' to - the ending IP address in the range in the form 'x.x.x.x'
20021	从静态 IP 地址池中删除一个范围。	Deletes a range from the static IP address pool.
20022	%1!s! [from = ] from [to = ] to 删除远程访问服务器使用的静态 IP 地址池范围。 from - 起始 IP 地址，格式为: 'x.x.x.x' to - 结束 IP 地址，格式为: 'x.x.x.x'	%1!s! [from = ] from [to = ] to Deletes a range from the static IP address pool that the Remote Access server uses. from - the starting IP address in the range in the form 'x.x.x.x' to - the ending IP address in the range in the form 'x.x.x.x'
20023	从静态 IP 地址池中删除所有范围。	Deletes all ranges from the static IP address pool.
20024	%1!s! 从静态 IP 地址池中删除所有范围。	%1!s! Deletes all ranges from the static IP address pool.
20025	设置是否启用或禁用使用 TCP/IP 上的 NetBIOS 来广播名称解析。	Sets whether to enable or disable broadcast name resolution using NetBIOS over TCP/IP.
20026	%1!s! [mode = ] ENABLED|DISABLED 指定是否在 TCP/IP 上使用 NetBIOS 以启用或禁用广播名称解析。 mode - 模式 ENABLED - 在 TCP/IP 上使用 NetBIOS 以启用广播名称解析。 DISABLED - 在 TCP/IP 上使用 NetBIOS 以禁用广播名称解析。	%1!s! [mode = ] ENABLED|DISABLED Specifies whether to enable or disable broadcast name resolution using NetBIOS over TCP/IP. mode - the mode ENABLED - enables broadcast name resolution using NetBIOS over TCP/IP. DISABLED - disables broadcast name resolution using NetBIOS over TCP/IP.
20027	以脚本形式转储远程访问 IPv6 配置信息。	Dumps Remote Access IPv6 configuration info in script form.
20028	显示当前远程访问 IPv6 配置。	Displays current Remote Access IPv6 configuration.
20029	设置远程访问服务器用以 向其客户端分配 IPv6 前缀的方法。	Sets the method by which the Remote Access server assigns IPv6 prefixes to its clients.
20030	设置 RAS 服务器使用的前缀。	Sets the prefix that RAS server uses.
20031	设置是否为客户端远程访问连接协商 IPv6。	Sets whether IPv6 is negotiated for client Remote Access connections.
20034	%1!s! 显示当前远程访问 IPv6 配置。	%1!s! Displays current Remote Access IPv6 configuration.
20035	%1!s! [mode = ] ALLOW|DENY 指定远程访问服务器是否允许对接受的任何客户端连接　　 配置 IPv6。 mode - 模式 ALLOW - 允许客户端连接配置 IPv6。 DENY - 不允许客户端连接配置 IPv6。	%1!s! [mode = ] ALLOW|DENY Specifies whether the Remote Access server will allow IPv6 to be configured for any client connections it accepts. mode - the mode ALLOW - permit IPv6 over client connections. DENY - do not permit IPv6 over client connections.
20037	用法: %1!s! [mode = ] ALL|SERVERONLY 参数: mode - 要授予的访问类型 ALL - 客户端可以到达远程访问服务器 及其连接的所有网络。 SERVERONLY - 客户端只能到达远程访问 服务器。 说明: 指定是否将来自任意客户端的 IPv6 网络流量 转发给远程访问服务器 连接的网络。	Usage: %1!s! [mode = ] ALL|SERVERONLY Parameters: mode - what type of access to grant ALL - clients are able to reach the remote access server and any networks to which it is connected. SERVERONLY - clients are able to reach the remote access server only. Remarks: Specifies whether IPv6 network traffic from any client is forwarded to the network(s) to which the remote access server is connected.
20038	%1!s! [method = ] AUTO|POOL 设置远程访问服务器向其客户端指派 IPv6 前缀 的方法。 method - 使用的方法 AUTO - 使用 DHCP 自动指派 IPv6 前缀。 POOL - 从远程访问服务器的池指派 IPv6 前缀。	%1!s! [method = ] AUTO|POOL Sets the method by which the Remote Access server assigns IPv6 prefixes to its clients. method - the method to use AUTO - automatically assigns IPv6 prefixes using DHCP. POOL - assigns IPv6 prefix from the Remote Access server's pool.
20039	%1!s! [ prefix= ] 设置远程访问服务器使用的静态 IPv6 前缀以播发到客户端。 - IPv6 前缀的格式为 'x:x:x:x::'	%1!s! [ prefix= ] Sets the static IPv6 prefix that the Remote Access server uses to advertise to the clients. - the IPv6 prefix in the form 'x:x:x:x::'
20042	指定路由和远程访问服务的 首选适配器。	Specifies the preferred adapter for Routing and Remote Access Service.
20043	%1!s![[name=] ] 指定路由和远程访问服务的首选适配器 name - 引用的字符串中的适配器名称 - 指定要使用的适配器 interface_name，以便获取用于分配的 IP 地址 (如果配置为使用 DHCP)，以及获取指派给 远程访问客户端和请求拨号使用的 DHCP 和 WINS 服务器的 IP 地址。 No Argument - 默认自动选择设置。指定 RAS 在启动路由和远程访问服务时随机选择 适配器	%1!s![[name=] ] Specifies the preferred adapter for Routing and Remote Access Service name - name of the adapter in quoted string - Specifies that the adapter interface_name to be used to obtain the IP address for the allocation (If Configured to use DHCP) and the IP address of DHCP and WINS server for assignment to remote access clients and demand dial uses. No Argument - Default auto select setting. Specifies that RAS to select an adapter at random when Routing and Remote Access Service is started
20044	显示路由和远程访问服务的 首选适配器。	Shows the preferred adapter for Routing and Remote Access Service.
20045	%1!s! 显示路由和远程访问服务的首选适配器	%1!s! Shows the preferred adapter for Routing and Remote Access Service
20046	为远程访问服务器配置 IPv6 的 “路由器播发”选项。	Configure the Router Advertisement option for IPv6 for the remote access server.
20047	用法: %1!s! [mode= ] ENABLE|DISABLE 参数: mode - 在此服务器上指定路由器播发选项的模式。 ENABLE - 启用路由器播发选项 DISABLE - 禁用路由器播发选项 备注: 默认路由为零长度前缀的路由 用作 IPv6 路由器的计算机不会将其自身播发为默认路由器， 除非使用为发布而配置的默认路由器(::/0)对其进行配置。	Usage: %1!s! [mode= ] ENABLE|DISABLE Parameters: mode - Specifies the mode for routeradvertise option on this server. ENABLE - Enable the routeradvertise option DISABLE - Disable the routeradvertisement option Remarks: A default route is a route for the zero-length prefix A computer that is being used as an IPv6 router will not advertise itself as a default router unless it is configured with a default route (::/0) that is configured to be published.
21000	RAS IP 配置 协商模式: %2!s! 访问模式: %3!s! 地址请求模式: %5!s! 广播名称解析: %6!s! 指派方法: %4!s! IP 地址池:	RAS IP config Negotiation mode: %2!s! Access mode: %3!s! Address request mode: %5!s! Broadcast name resolution: %6!s! Assignment method: %4!s! Pool:
21003	# ----------------------------------------- # 远程访问 IP 配置 # -----------------------------------------	# ----------------------------------------- # Remote Access IP Configuration # -----------------------------------------
21004	# 远程访问 IP 配置结束。	# End of Remote Access IP configuration.
21005	%1!11s! 到 %2!11s!	%1!11s! to %2!11s!
21006	RAS IPv6 配置 协商模式 : %2!s! 访问模式 : %3!s! 路由器播发模式 : %4!s! 分配方法 : %5!s! 前缀 : %6!s!	RAS IPv6 config Negotiation mode : %2!s! Access mode : %3!s! Router Advertise mode : %4!s! Assignment method : %5!s! Prefix : %6!s!
21009	# ----------------------------------------- # 远程访问 IPv6 配置 # -----------------------------------------	# ----------------------------------------- # Remote Access IPv6 Configuration # -----------------------------------------
21010	# 远程访问 IPv6 配置结束。	# End of Remote Access IPv6 configuration.
21050	输入的 IP 地址无效。	An IP address entered was invalid.
21053	在你切换到地址池指派模式之前，你必须用‘%1!s!’命令 指定一个有效的 IP 地址池。	Before you can switch to pool assignment mode, you must specify a valid IP address pool using the '%1!s!' command.
21054	输入的 IP 地址的格式为 127.x.x.x	An IP address entered was in the form 127.x.x.x
21055	范围不够大。	The range is not large enough.
21056	没有给定原因。	No reason given
21057	输入的 IP 地址范围无效，原因如下: %1!s! 对 IP 地址池的限制如下: 1. 基 IP 地址必须指定为标准的以点分隔的格式， 而且必须在 1.0.0.0 到 224.0.0.0 之间 2. 地址不能为 127.x.x.x 的格式。 3. “从” IP 地址必须至少比“到”地址小 1 个地址。	The IP address range entered is invalid for the following reason: %1!s! The following constraints apply to IP address ranges: 1. The addresses must be specified in standard dotted notation and must lie between 1.0.0.0 and 224.0.0.0 2. The addresses must not be in the form the form 127.x.x.x. 3. The 'from' IP address must be at least 1 address less than the 'to' address.
21058	由于与现存范围重叠，你输入的范围不能被指派到 系统中。	The range you entered can not be assigned to the system since it overlaps an existing range.
21059	输入的 IPv6 前缀不被接受，原因如下: %1!s! 以下约束适用于 IPv6 前缀: 必须以标准的冒号表示法指定前缀 即 3FFE:1234:5678:90AB::	The IPv6 prefix entered is not accepted for the following reason: %1!s! The following constraint apply to IPv6 prefix: The prefix must be specified in standard colon notation i.e. 3FFE:1234:5678:90AB::
21060	前缀无效。	The prefix is invalid.
21065	首选适配器: 允许路由和远程访问服务选择适配器	Preferred adapter : Allow Routing and Remote Access Service to select adapter
21066	首选适配器: %1!s!	Preferred adapter : %1!s!
21067	请指定有效适配器名称。	Please specify a valid adapter name.
21068	无法找到指定的适配器: %1!s!	The specified adapter could not be found : %1!s!
21069	接口不是专用类型。指定始终连接的 接口。例如 LAN 接口，或通过租用线路连接的接口。	The interface is not of Dedicated Type. Specify an interface that is always connected. Like a LAN interface, or interface connected over a leased line.
21070	指定的接口上没有启用 IP。	IP is not enabled on the specified interface.
26000	添加一个 RADIUS 身份验证服务器。	Adds a RADIUS authentication server.
26002	添加一个 RADIUS 记帐服务器。	Adds a RADIUS accounting server.
26003	删除一个 RADIUS 服务器。	Deletes a RADIUS server.
26004	删除一个 RADIUS 记帐服务器。	Deletes a RADIUS accounting server.
26005	设置身份验证提供者。	Sets the authentication provider.
26006	设置记帐提供者。	Sets the accounting provider.
26007	设置身份验证服务器的属性。	Sets properties of an authentication server.
26008	设置记帐服务器的属性。	Sets properties of an accounting server.
26010	显示当前身份验证提供者。	Displays the current authentication provider.
26011	显示用来做身份验证的 RADIUS 服务器。	Displays the RADIUS server(s) used for authentication.
26013	显示当前记帐提供者。	Displays the current accounting provider.
26014	显示用于记帐的 RADIUS 服务器。	Displays the RADIUS server(s) used for accounting.
26016	%1!s! [ name = ] server [ [secret =] secret [init-score =] InitialScore [port =] port [timeout =] timeout [signature = ] ENABLED|DISABLED ] 提供 RADIUS 服务器的 IP 地址或名称以通过身份验证要求。 name RADIUS 服务器的 DNS 名称或 IP 地址 secret 共享的机密 init-score 初始化记分 (服务器优先权) port 设置发送身份验证要求的端口。 timeout 在 RADIUS 服务器被标为不可用以前的超时 时间 (秒) signature 是否使用消息身份验证器	%1!s! [ name = ] server [ [secret =] secret [init-score =] InitialScore [port =] port [timeout =] timeout [signature = ] ENABLED|DISABLED ] Provides an IP address or name of a RADIUS server to pass authentication requests. name The DNS name or IP address of the RADIUS server secret The shared secret init-score Initial score (server priority) port Sets the port on which to send the authentication requests. timeout The timeout period before the RADIUS server is marked unavailable (seconds) signature Whether to use Message Authenticator
26018	%1!s! [ name = ] server [ [secret =] secret [init-score =] InitialScore [port =] port [timeout = ] timeout [messages = ] ENABLED|DISABLED ] 提供一个 RADIUS 服务器的 IP 地址或名称以记帐。 name RADIUS 服务器的 DNS 名称或 IP 地址 secret 共享的机密 init-score 初始作用域 (服务器优先级) port 设置发送身份验证要求的端口。 timeout 在 RADIUS 服务器被标为不可用之前的超时 时间(秒) messages 是否发送记帐开/关消息。	%1!s! [ name = ] server [ [secret =] secret [init-score =] InitialScore [port =] port [timeout = ] timeout [messages = ] ENABLED|DISABLED ] Provides an IP address or name of a RADIUS server to use for accounting. name The DNS name or IP address of the RADIUS server secret The shared secret init-score Initial score (server priority) port Sets the port on which to send the authentication requests. timeout The timeout period before the RADIUS server is marked unavailable (seconds) messages Whether to send accounting on/off messages.
26020	%1!s! [name = ] server 删除一个 RADIUS 身份验证服务器。	%1!s! [name = ] server Deletes a RADIUS authentication server.
26022	%1!s! [name = ] server 删除一个 RADIUS 记帐服务器。	%1!s! [name = ] server Deletes a RADIUS accounting server.
26024	%1!s! [provider =] WINDOWS|RADIUS 设置身份验证提供者。 windows Windows 安全应执行身份验证。 radius RADIUS 服务器应执行身份验证。	%1!s! [provider =] WINDOWS|RADIUS Sets the authentication provider. windows Windows security should perform authentication. radius A RADIUS server should perform authentication.
26025	%1!s! [provider =] WINDOWS|RADIUS|NONE 设置记帐提供者。 windows Windows 安全应执行记帐。 radius RADIUS 服务器应执行记帐。 none 不执行记帐。	%1!s! [provider =] WINDOWS|RADIUS|NONE Sets the accounting provider. windows Windows security should perform accounting. radius A RADIUS server should perform accounting. none Do not perform accounting.
26028	%1!s! 显示身份验证提供者	%1!s! Displays the authentication provider
26029	%1!s! 显示记帐提供者	%1!s! Displays the accounting provider
26030	%1!s! [ [name = ] server ] 显示身份验证服务器的详细 信息。 name RADIUS 服务器的 DNS 名称或 IP 地址 如果没有提供服务器名称，将显示所有配置的 身份验证服务器。	%1!s! [ [name = ] server ] Displays detailed information about an authentication server. name The DNS name or IP address of the RADIUS server If no server name is provided, all configured authentication servers will be displayed.
26031	%1!s! [ [name = ] server ] 显示记帐服务器的详细信息。 name RADIUS 服务器的 DNS 名称或 IP 地址 如果没有提供服务器名称，将显示所有配置的 记帐服务器。	%1!s! [ [name = ] server ] Displays detailed information about an accounting server. name The DNS name or IP address of the RADIUS server If no server name is provided, all configured accounting servers will be displayed.
26034	将远程访问 AAAA 配置信息转储为 script 格式。	Dumps Remote Access AAAA configuration info in script form.
26035	%1!s! 将远程访问 AAAA 配置信息转储为 script 格式。	%1!s! Dumps Remote Access AAAA configuration information in script form.
26100	远程访问身份验证提供者: %1!s!	Remote Access authentication provider: %1!s!
26101	远程访问记帐提供者: %1!s!	Remote Access accounting provider: %1!s!
26102	%1!-34s! %2!-14s! %3!-4d! %4!-5d! %5!-7d! %6!s!	%1!-34s! %2!-14s! %3!-4d! %4!-5d! %5!-7d! %6!s!
26104	Name Address Port Score Timeout Signature -------------------------------------------------------------------------------	Name Address Port Score Timeout Signature -------------------------------------------------------------------------------
26105	Name Address Port Score Timeout Messages -------------------------------------------------------------------------------	Name Address Port Score Timeout Messages -------------------------------------------------------------------------------
26106	要使更改生效，必须重新启动远程访问服务。	The Remote Access Service must be restarted for the changes to take effect.
26107	# ----------------------------------------- # 远程访问 AAAA 配置 # -----------------------------------------	# ----------------------------------------- # Remote Access AAAA Configuration # -----------------------------------------
26108	# 远程访问 AAAA 配置结束。	# End of Remote Access AAAA configuration.
26110	%1!s! %2!s! %3!s! %4!s! %5!s! %6!s!	%1!s! %2!s! %3!s! %4!s! %5!s! %6!s!
26111	L2TP 连接的 IPsec 策略: 使用预共享密钥的自定义策略。	IPsec policy for L2TP connections : Custom policy using Pre-Shared Keys.
26112	L2TP 连接的 IPsec 策略: 证书授权策略。	IPsec policy for L2TP connections : Certificate Authority policy.
26113	设置 L2TP 连接的 IPsec 策略。	Sets the IPsec policy for L2TP connection.
26114	%1!s! [psk=] ENABLED | DISABLED [secret =] 设置 L2TP 连接的 IPsec 策略。 psk - 指定 L2TP 连接是否可以使用自定义 IPsec 策略 ENABLED - 使用预共享密钥的自定义 IPsec 策略 DISABLED - 证书授权策略。 secret - 要与自定义 IPsec 策略一起使用的预共享密钥。	%1!s! [psk=] ENABLED | DISABLED [secret =] Sets the IPsec policy for L2TP connection. psk - Specifies whether a L2TP connection can use a Custom IPsec policy ENABLED - Custom IPsec policy using pre-shared keys DISABLED - Certificate Authority Policy. secret - The pre-shared key to be used with custom IPsec policy.
26115	显示 L2TP 连接的 IPsec 策略。	Shows the IPsec policy for L2TP connection.
26116	%1!s! 显示 L2TP 连接的 IPsec 策略。	%1!s! Shows the IPsec policy for L2TP connection.
26150	无法添加已经添加的服务器。	Cannot add a server which is already added.
26151	路由和远程访问服务未在此计算机上运行	Routing and Remote Access service is not running on this computer
26152	错误的预共享密钥。 \ 输入的预共享密钥要多于一个字符且少于 256 个字符， 并用引号括起来。	Bad Pre-Shared key. \ Enter a pre-shared key with more than one and less than 256 characters, enclosed within quotes.
26153	无法设置未添加的服务器的属性。	Cannot set properties of a server which is not added.
27000	安装信息。	Installation Info.
27001	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] 安装信息 type - 目标类型。 FILE - 保存诊断报告到文件。 EMAIL - 诊断报告发送到电子邮件地址。 destination - 诊断报告目标。文件名或电子邮件地址都是有效的目标。 compression - 诊断报告压缩到 CAB 文件中。 ENABLED - 启用压缩。默认值是电子邮件目标。 DISABLED - 禁用压缩。默认值是文件目标。 hours - 仅显示在过去的小时中的日志记录项。 1 - 24 有效。如果没有指定时间，将显示整个日志。 verbose - 包含在诊断报告中的数据量。 ENABLED - 启用详细信息。 DISABLED - 禁用详细信息。默认值。	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] Installation Info. type - type of destination. FILE - save the diagnostic report to a file. EMAIL - send the diagnostic report to an email address. destination - the destination for the diagnostic report. Either a filename or an email address is a valid destination. compression - compress the diagnostic report into a CAB file. ENABLED - enables compression. Default setting for email destination. DISABLED - disables compression. Default setting for file destination. hours - only show log entries from this number of hours in the past. 1 - 24 is valid. If no time is specified, the entire log will be displayed. verbose - Amount of data to include in the diagnostic report. ENABLED - enables verbose information. DISABLED - disables verbose information. Default.
27002	文件名 : %1!s! 最近写时间 : %2!0.2d!/%3!0.2d!/%4!0.4d! %5!0.2d!:%6!0.2d! 创建时间 : %7!0.2d!/%8!0.2d!/%9!0.4d! %10!0.2d!:%11!0.2d! 文件大小 : %12!d! 字节	File Name : %1!s! Last Write Time : %2!0.2d!/%3!0.2d!/%4!0.4d! %5!0.2d!:%6!0.2d! Creation Time : %7!0.2d!/%8!0.2d!/%9!0.4d! %10!0.2d!:%11!0.2d! File Size : %12!d! bytes
27003	%1!-41s! =	%1!-41s! =
27004	成功	OK.
27005	找不到。	Not Found.
27008	%1!-20s! %2!s!	%1!-20s! %2!s!
27009	网络适配器 ----------	Network Adapters ----------------
27010	网络协议 --------	Network Protocols -----------------
27011	网络服务 --------	Network Services ----------------
27012	网络客户端 ----------	Network Clients ---------------
27017	修补远程访问的所有组件的安装。	Repairs the installation of all Remote Access components.
27018	%1!s! [ [ answerfile = ] answerfile ] 修复所有远程访问组件。 answerfile - 回答文件名。如果没有提供回答文件， 则使用默认的系统值。有关回答文件的语法信息，请 参照“Preinstallation Reference”文档。	%1!s! [ [ answerfile = ] answerfile ] Repairs the installation of all Remote Access components. answerfile - the answerfile name. If no answerfile is provided, the default system values are utilized. For more information on the syntax of the answerfile, please refer to the 'Preinstallation Reference' documentation.
27019	修补成功。需要重新启动计算机，更改才生效。	Repair successful. You need to reboot your computer for this change to take effect.
27023	answerfile 无效。 1	The answerfile is invalid.
27030	下面的注册表项目找不到:	The following registry keys were not found:
27031	启用/禁用所有组件的扩展跟踪。	Enables/disables extended tracing for all components.
27032	%1!s! [ state = ] ENABLED|DISABLED|CLEAR 启用、禁用或清除所有网络连接的扩展跟踪日志。 state - - 跟踪 RAS 组件的状态 ENABLED - 启用所有网络连接的所有可用记录功能。 DISABLED - 禁用所有网络连接的所有可用记录功能。 CLEAR - 清除所有扩展的跟踪日志文件。	%1!s! [ state = ] ENABLED|DISABLED|CLEAR Enables, disables, or clears extended tracing logs for all network connections. state - - tracing state of the RAS components ENABLED - Enables all available logging functions for all network connections. DISABLED - Disables all available logging functions for all network connections. CLEAR - Clears all extended tracing log files.
27033	显示是否所有组件启用了扩展跟踪。	Shows whether extended tracing is enabled for all components.
27034	用法: %1!s! 显示是否所有组件启用了扩展跟踪。	Usage: %1!s! Shows whether extended tracing is enabled for all components.
27035	显示扩展跟踪是否在此组件上启用。	Shows whether extended tracing is enabled for components.
27036	%1!s! [ [component = ] component ] 显示给定的组件是否启用了跟踪。如果没有给出组件，则显示所有组件的状态。 component - 组件	%1!s! [ [component = ] component ] Shows whether tracing for the given component is enabled. If no component is specified, shows the state of all components. component - the component
27037	为组件启用/禁用扩展跟踪。	Enables/disables extended tracing for a component.
27038	%1!s! [component = ] component [state = ] ENABLED|DISABLED 为给定组件启用或禁用扩展跟踪。 component - 组件 (使用 '*' 代表所有组件)	%1!s! [component = ] component [state = ] ENABLED|DISABLED Enables or disables extended tracing for the given component. component - the component (use '*' to denote all components)
27039	%1!-40s! %2!s!	%1!-40s! %2!s!
27041	成功地设置了远程访问跟踪。	Successfully set Remote Access tracing.
27042	不能修改远程访问跟踪设置。	Unable to modify Remote Access tracing settings.
27043	成功地设置了调制解调器跟踪。	Successfully set modem tracing.
27044	不能设置调制解调器跟踪，或者没有安装调制解调器。 这不是错误。	Unable to set modem tracing or no modems are currently installed. This is not an error.
27045	网络连接期间，启用或禁用跟踪调制解调器的设置和消息。	Enables or disables tracing of modem settings and messages during a network connection.
27046	%1!s! [ state = ] ENABLED|DISABLED 网络连接期间，启用或禁用跟踪调制解调器的设置和消息。 state - 跟踪调制解调器的状态 ENABLED - 为使用调制解调器的所有网络连接启用调制解调器跟踪。 DISABLED - 为使用调制解调器的所有网络连接禁用调制解调器跟踪。	%1!s! [ state = ] ENABLED|DISABLED Enables or disables tracing of modem settings and messages during a network connection. state - tracing state of modem ENABLED - Enables modem tracing for all network connections that use a modem. DISABLED - Disables modem tracing for all network connections that use a modem.
27047	显示是否启用了网络连接期间对调制解调器设置和消息的跟踪。	Shows whether tracing of modem settings and messages during a network connection is enabled.
27048	用法: %1!s! 显示是否启用了网络连接期间对调制解调器设置和消息的跟踪。	Usage: %1!s! Shows whether tracing of modem settings and messages during a network connection is enabled.
27049	启用了调制解调器跟踪。	Modem tracing is enabled.
27050	成功地清除了调制解调器跟踪日志文件。	Successfully cleared the modem tracing log files.
27052	不能清除调制解调器跟踪日志文件，或者日志文件不存在。	Unable to clear modem tracing log files or no log files were present to delete.
27053	成功地清除了远程访问跟踪日志文件。	Successfully cleared Remote Access tracing log files.
27054	不能清除了远程访问跟踪日志文件，或者日志文件不存在。	Unable to clear Remote Access tracing log files or no log files were present to delete.
27055	调制解调器跟踪被禁用，或者没有安装。	Modem tracing is disabled or no modems are currently installed.
27056	启用/禁用连接管理器日志。	Enables/disables Connection Manager logging.
27057	%1!s! [ state = ] ENABLED|DISABLED 启用或禁用连接管理器服务配置文件的日志记录。 state - 跟踪连接管理器服务配置文件的状态。 ENABLED - 启用连接管理器连接的日志。 DISABLED - 禁用连接管理器服务配置文件的日志记录。	%1!s! [ state = ] ENABLED|DISABLED Enables or disables logging for Connection Manager service profiles. state - tracing state for Connection Manager service profiles. ENABLED - Enables logging for Connection Manager service profiles. DISABLED - Disables logging for Connection Manager service profiles.
27058	显示是否启用了连接管理器日志。	Shows whether Connection Manager logging is enabled.
27059	用法: %1!s! 显示是否启用了连接管理器日志。	Usage: %1!s! Shows whether Connection Manager logging is enabled.
27060	成功地清除了连接管理器日志文件。	Successfully cleared Connection Manager log files.
27061	不能清除了连接管理器日志文件，或者日志文件不存在。	Unable to clear Connection Manager logs files or no log files were present to delete.
27062	成功地设置了连接管理器日志。	Successfully set Connection Manager logging.
27063	不能设置连接管理器日志，或者没有安装连接管理器服务配置文件。 这不是错误。	Unable to set Connection Manager logging or no Connection Manager service profiles are currently installed. This is not an error.
27064	启用了连接管理器日志。	Connection Manager logging is enabled.
27065	禁用了连接管理器日志，或者没有安装连接管理器配置文件。	Connection Manager logging is disabled or no Connection Manager profiles are currently installed.
27066	%1!0.2d! %2!-45.45s! %3!-15.15s!	%1!0.2d! %2!-45.45s! %3!-15.15s!
27067	不能显示远程访问 INF 文件。	Unable to show Remote Access INF Files.
27068	不能显示远程访问设备列表。	Unable to show Remote Access device list.
27069	成功地清除了安全事件日志。	Successfully cleared the Security Event Logs.
27070	不能清除安全事件日志。	Unable to clear the Security Event Logs.
27071	成功地设置了安全事件日志。	Successfully set the Security Event Logs.
27072	不能设置安全事件日志。	Unable to set the Security Event Logs.
27073	启用了安全事件日志。	Security Event Logs are enabled.
27074	禁用了安全事件日志。	Security Event Logs are disabled.
27075	显示是否启用了安全事件日志。	Shows whether Security Event Logs are enabled.
27076	用法: %1!s! 显示是否启用了安全事件日志。	Usage: %1!s! Shows whether logging of Security Events is enabled.
27077	启用或禁用安全事件日志记录。可以使用事件查看器查看安全事件日志。	Enables or disables Security Event logging. You can view Security Event logs using Event Viewer.
27078	%1!s! [ state = ] ENABLED|DISABLED 启用或禁用安全事件日志记录。可以使用事件查看器查看安全事件日志。 state - 跟踪安全事件的状态 ENABLED - 为所有网络连接启用安全事件日志记录。 DISABLED - 为所有网络连接禁用安全事件日志记录。	%1!s! [ state = ] ENABLED|DISABLED Enables or disables Security Event logging. You can view Security Event logs using Event Viewer. state - tracing state of security events ENABLED - Enables logging of Security Events for all network connections. DISABLED - Disables logging of Security Events for all network connections.
27079	培植信息。	Configuration Info.
27080	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] 配置信息 type - 目标类型。 FILE - 保存诊断报告到文件。 EMAIL - 诊断报告发送到电子邮件地址。 destination - 诊断报告目标。文件名或电子邮件地址都是有效的目标。 compression - 诊断报告压缩到 CAB 文件中。 ENABLED - 启用压缩。默认值是电子邮件目标。 DISABLED - 禁用压缩。默认值是文件目标。 hours - 仅显示在过去的小时中的日志记录项。 1 - 24 有效。如果没有指定时间，将显示整个日志。 verbose - 包含在诊断报告中的数据量。 ENABLED - 启用详细信息。 DISABLED - 禁用详细信息。默认值。	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] Configuration Info. type - type of destination. FILE - save the diagnostic report to a file. EMAIL - send the diagnostic report to an email address. destination - the destination for the diagnostic report. Either a filename or an email address is a valid destination. compression - compress the diagnostic report into a CAB file. ENABLED - enables compression. Default setting for email destination. DISABLED - disables compression. Default setting for file destination. hours - only show log entries from this number of hours in the past. 1 - 24 is valid. If no time is specified, the entire log will be displayed. verbose - Amount of data to include in the diagnostic report. ENABLED - enables verbose information. DISABLED - disables verbose information. Default.
27081	显示所有日志。	Shows all logs.
27082	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] 显示所有日志 type - 目标类型。 FILE - 保存诊断报告到文件。 EMAIL - 诊断报告发送到电子邮件地址。 destination - 诊断报告目标。文件名或电子邮件地址都是有效的目标。 compression - 诊断报告压缩到 CAB 文件中。 ENABLED - 启用压缩。默认值是电子邮件目标。 DISABLED - 禁用压缩。默认值是文件目标。 hours - 仅显示在过去的小时中的日志记录项。 1 - 24 有效。如果没有指定时间，将显示整个日志。 verbose - 包含在诊断报告中的数据量。 ENABLED - 启用详细信息。 DISABLED - 禁用详细信息。默认值。	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] Shows all logs. type - type of destination. FILE - save the diagnostic report to a file. EMAIL - send the diagnostic report to an email address. destination - the destination for the diagnostic report. Either a filename or an email address is a valid destination. compression - compress the diagnostic report into a CAB file. ENABLED - enables compression. Default setting for email destination. DISABLED - disables compression. Default setting for file destination. hours - only show log entries from this number of hours in the past. 1 - 24 is valid. If no time is specified, the entire log will be displayed. verbose - Amount of data to include in the diagnostic report. ENABLED - enables verbose information. DISABLED - disables verbose information. Default.
27083	不能显示远程访问跟踪日志，或者没有日志文件。	Unable to show Remote Access tracing logs or no log files were present.
27084	不能显示调制解调器跟踪日志，或者没有日志文件。	Unable to show modem tracing logs or no log files were present.
27085	不能显示连接管理器日志，或者没有日志文件。	Unable to show Connection Manager logs or no log files were present.
27086	不能显示 IPsec 跟踪日志，或者没有日志文件。	Unable to show IPsec tracing logs or no log files were present.
27087	不能修改 IPsec 跟踪设置。	Unable to modify IPsec tracing settings.
27088	成功地设置了 IPsec 跟踪设置。	Successfully set IPsec tracing settings.
27089	不能验证安装的远程访问组件。	Unable to validate installed Remote Access components.
27090	不能验证安装的网络组件。	Unable to validate installed networking components.
27091	不能修复远程访问。	Unable to repair Remote Access.
27093	不能显示进程信息。	Unable to show process information.
27094	不能显示远程访问事件日志，或者无日志记录。	Unable to show Remote Access event logs or no log entries were present.
27095	不能显示系统远程访问电话簿，或者没有远程访问连接。	Unable to show the system Remote Access phone book or no Remote Access connections are present.
27096	不能显示用户远程访问电话簿，或者没有远程访问连接。	Unable to show the user Remote Access phone book or no Remote Access connections are present.
27097	不能显示终端程序输出。	Unable to show the console utilities output.
27098	显示远程访问诊断报告。	Shows Remote Access Diag Report.
27099	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] 显示整个远程访问诊断报告 type - 目标类型。 FILE - 保存诊断报告到文件。 EMAIL - 诊断报告发送到电子邮件地址。 destination - 诊断报告目标。文件名或电子邮件地址都是有效的目标。 compression - 诊断报告压缩到 CAB 文件中。 ENABLED - 启用压缩。默认值是电子邮件目标。 DISABLED - 禁用压缩。默认值是文件目标。 hours - 仅显示在过去的小时中的日志记录项。 1 - 24 有效。如果没有指定时间，将显示整个日志。 verbose - 包含在诊断报告中的数据量。 ENABLED - 启用详细信息。 DISABLED - 禁用详细信息。默认值。	%1!s! [ type = ] FILE|EMAIL [ destination = ] destination [ [ compression = ] ENABLED|DISABLED [ hours = ] hours [ verbose = ] ENABLED|DISABLED ] Shows the entire Remote Access Diagnostic Report. type - type of destination. FILE - save the diagnostic report to a file. EMAIL - send the diagnostic report to an email address. destination - the destination for the diagnostic report. Either a filename or an email address is a valid destination. compression - compress the diagnostic report into a CAB file. ENABLED - enables compression. Default setting for email destination. DISABLED - disables compression. Default setting for file destination. hours - only show log entries from this number of hours in the past. 1 - 24 is valid. If no time is specified, the entire log will be displayed. verbose - Amount of data to include in the diagnostic report. ENABLED - enables verbose information. DISABLED - disables verbose information. Default.
27100	不能显示 winmsd/msinfo32 报告。	Unable to show the winmsd/msinfo32 report.
27101	成功地创建了诊断报告: %1!s!	Successfully created the Diagnostic Report: %1!s!
27102	成功地发送了诊断报告: %1!s!	Successfully sent the Diagnostic Report: %1!s!
27103	不能创建了诊断报告: %1!s!	Unable to create the Diagnostics Report: %1!s!
27104	不能发送诊断报告: %1!s!	Unable to send the Diagnostic Report: %1!s!
27105	不能压缩诊断报告: %1!s!	Unable to compress the Diagnostic Report: %1!s!
27106	不能显示诊断报告: %1!s!	Unable to display the Diagnostic Report: %1!s!
27107	不能显示安全事件日志，或者没有日志记录。	Unable to show security event logs or no log entries were present.
27109	目录	Table Of Contents
27110	跟踪日志	Tracing Logs
27111	远程访问事件日志	Remote Access Event Logs
27112	安全事件日志	Security Event Logs
27113	报告版本: %1!d!.0日期和时间: %2!s! %3!s!用户名: %4!s!计算机名: %5!s!Windows 目录: %6!s!Windows 版本: %7!d!.%8!s!.%9!s!	Report Version: %1!d!.0Date and Time: %2!s! %3!s!Username: %4!s!Computer Name: %5!s!Windows Directory: %6!s!Windows Version: %7!d!.%8!s!.%9!s!
27114	远程访问诊断报告	Remote Access Diagnostic Report
27115	跟踪和事件日志	Tracing and Event Logs
27116	安装信息	Installation Information
27117	信息文件	Information Files
27118	安装检查	Installation Check
27119	安装的网络组件	Installed Networking Components
27120	注册表检查	Registry Check
27121	配置信息	Configuration Information
27122	安装的设备	Installed Devices
27123	进程信息	Process Information
27124	命令行程序	Command-Line Utilities
27125	系统信息报告	System Information Report
27126	电话簿文件	Phone Book Files
27127	%1!4d! %2!-16s!	%1!4d! %2!-16s!
27128	%1!s!: %2!s!	%1!s!: %2!s!
27129	,%1!s!	,%1!s!
27130	成功	Success
27131	错误	Error
27132	警告	Warning
27133	信息	Information
27134	成功审核	Success Audit
27135	失败审核	Failure Audit
27136	无	None
27137	暂缺	N/A
27138	事件类型: %1!s! 事件源: %2!s! 事件分类: %3!s! 事件 ID: %4!d! 日期: %5!s! 时间: %6!s! 用户: %7!s! 计算机: %8!s! 描述: %9!s!	Event Type: %1!s! Event Source: %2!s! Event Category: %3!s! Event ID: %4!d! Date: %5!s! Time: %6!s! User: %7!s! Computer: %8!s! Description: %9!s!
27139	事件类型: %1!s! 事件源: %2!s! 事件分类: %3!s! 事件 ID: %4!d! 日期: %5!s! 时间: %6!s! 用户: %7!s!\%8!s! 计算机: %9!s! 描述: %10!s!	Event Type: %1!s! Event Source: %2!s! Event Category: %3!s! Event ID: %4!d! Date: %5!s! Time: %6!s! User: %7!s!\%8!s! Computer: %9!s! Description: %10!s!
27140	连接管理器日志	Connection Manager Logs
27141	调制解调器日志	Modem Logs
27142	IP 安全日志	IP Security Log
27144	# ----------------------------------------- # 远程访问诊断配置 # -----------------------------------------	# ----------------------------------------- # Remote Access Diagnostics Configuration # -----------------------------------------
27145	# 远程访问诊断配置结束	# End of Remote Access Diagnostics Configuration.
27149	%1!s! [component = ] component [state = ] ENABLED|DISABLED 启用或禁用过给定组件的扩展跟踪。 component - 组件(使用 '*' 来代表所有组件)	%1!s! [component = ] component [state = ] ENABLED|DISABLED Enables or disables extended tracing for the given component. component - the component (use '*' to denote all components)
27150	终端程序超时并被终止。	The console utility timed out and was terminated.
27151	设置 RRAS 的全局日志级别	Sets the global Log level for RRAS
27152	%1!s! [events=] error | warn | all | none 设置路由和远程访问服务的全局日志级别 events - 要记录到事件查看器的系统日志中的事件 none - 指定不记录任何事件 error - 指定只记录错误 warn - 指定记录错误和警告 all - 指定记录所有事件。	%1!s! [events=] error | warn | all | none Sets the global Log level for Routing and Remote Access Service events - Events to log into the System Log in Event Viewer none - Specifies that no event is logged error - Specifies that only errors are logged warn - Specifies that errors and warnings are logged all - Specifies to log all events.
27153	显示 RRAS 的全局日志级别	Shows the global Log level for RRAS
27154	%1!s! 显示路由和远程访问服务的全局日志级别	%1!s! Shows the global Log level for Routing and Remote Access Service
27155	服务器全局日志记录属性 -------------------------------- 记录的事件:	Server Global Logging Properties -------------------------------- Events logged :
27156	仅记录错误	Log errors only
27157	记录错误和警告	Log errors and warnings
27158	记录所有事件	Log All events
27159	不记录任何事件	Do not log any events
27160	必须指定全局日志级别	You must specify the global log level
28080	VPN1	VPN1
28081	COM1	COM1
28082	PPPOE1-0	PPPOE1-0
28083	已启用	Enabled
28084	已禁用	Disabled
28085	无法访问	Unreachable
28087	正在连接	Connecting
28088	已连接	Connected
28089	受限的	Restricted
28090	不受限制的	Unrestricted
28091	临时无限制	Temporarily unrestricted
28092	未知	Unknown
29001	无法启动对 RRAS 组件的 ETW 跟踪	Unable to start ETW tracing for RRAS components
29002	无法清除对 RRAS 组件的 ETW 跟踪	Unable to clear ETW tracing for RRAS components

File Name:	rasmontr.dll.mui
Directory:	%WINDIR%\WinSxS\amd64_microsoft-windows-rasmontr.resources_31bf3856ad364e35_10.0.15063.0_zh-cn_907c24186c05a9bb\
File Size:	74 kB
File Permissions:	rw-rw-rw-
File Type:	Win32 DLL
File Type Extension:	dll
MIME Type:	application/octet-stream
Machine Type:	Intel 386 or later, and compatibles
Time Stamp:	0000:00:00 00:00:00
PE Type:	PE32
Linker Version:	14.10
Code Size:	0
Initialized Data Size:	75264
Uninitialized Data Size:	0
Entry Point:	0x0000
OS Version:	10.0
Image Version:	10.0
Subsystem Version:	6.0
Subsystem:	Windows GUI
File Version Number:	10.0.15063.0
Product Version Number:	10.0.15063.0
File Flags Mask:	0x003f
File Flags:	(none)
File OS:	Windows NT 32-bit
Object File Type:	Dynamic link library
File Subtype:	0
Language Code:	Chinese (Simplified)
Character Set:	Unicode
Company Name:	Microsoft Corporation
File Description:	RAS 监视程序 DLL
File Version:	10.0.15063.0 (WinBuild.160101.0800)
Internal Name:	rasmontr.dll
Legal Copyright:	© Microsoft Corporation. All rights reserved.
Original File Name:	rasmontr.dll.mui
Product Name:	Microsoft® Windows® Operating System
Product Version:	10.0.15063.0
Directory:	%WINDIR%\WinSxS\x86_microsoft-windows-rasmontr.resources_31bf3856ad364e35_10.0.15063.0_zh-cn_345d8894b3a83885\

rasmontr.dll.mui is Multilingual User Interface resource file that contain Chinese (Simplified) language for file rasmontr.dll (RAS 监视程序 DLL).

File Description:	RAS 监视程序 DLL
File Version:	10.0.15063.0 (WinBuild.160101.0800)
Company Name:	Microsoft Corporation
Internal Name:	rasmontr.dll
Legal Copyright:	© Microsoft Corporation. All rights reserved.
Original Filename:	rasmontr.dll.mui
Product Name:	Microsoft® Windows® Operating System
Product Version:	10.0.15063.0
Translation:	0x804, 1200