1001 | Windows 图像采集(WIA)遇到常见错误。 |
Windows Image Acquisition (WIA) encountered a general error. |
1002 | 卡纸。请检查设备,确保送纸通道畅通并且所有盖子均已关上。 |
Paper jam. Check the device and make sure that the paper path is clear and all covers are closed. |
1003 | 无纸。请将文档放入扫描仪进纸盒中,然后再试一次。 |
No paper. Place a document in the scanner input tray and retry. |
1004 | 纸张问题。请检查设备,确保送纸通道畅通并且所有盖子均已关上。 |
Paper problem. Check the device and make sure that the paper path is clear and all covers are closed. |
1005 | 设备脱机。请检查设备,确保设备已接通电源并与电脑相连。 |
The device is offline. Check the device and make sure that it is powered on and connected to the PC. |
1006 | 设备正忙。请关闭其他使用此设备的应用,或者等待设备完成扫描,然后再试一次。 |
The device is busy. Close any other apps that use this device or wait for the device to finish scanning and then retry. |
1007 | 设备正在预热。一旦此操作完成,设备就可以继续运转。 |
The device is warming up. The device is expected to become operational again once this operation is complete. |
1008 | 需要用户干预。请检查设备。 |
User intervention required. Check the device. |
1009 | 代表选定扫描输入源项目的 WIA 项目不再有效。 |
The WIA item representing the selected scan input source item is no longer available. |
1010 | 无法与设备通信。请检查设备是否接通电源并与电脑相接。如果问题持续存在,请尝试断开设备,然后重新连接。 |
Cannot communicate with the device. Check that the device is powered on and connected to the PC. If the problem persists try to disconnect and reconnect the device. |
1011 | 无效的扫描仪设备命令。 |
Invalid scanner device command. |
1012 | 不正确的硬件设置。 |
Incorrect Hardware setting. |
1013 | 设备当前已被锁定。请关闭其他所有使用此设备的应用,或者等待此设备完成扫描,然后再试一次。 |
The device is currently locked. Close any other apps that use this device or wait for the device to finish scanning and then retry. |
1014 | 设备的 WIA 驱动程序出现异常。 |
The WIA driver for the device generated an exception. |
1015 | 无效的 WIA 驱动程序响应。 |
Invalid WIA driver response. |
1016 | 盖子已被打开。请检查设备,确保所有盖子均已关上。 |
Cover open. Check the device and make sure that all covers and lids are closed. |
1018 | 扫描仪设备因为它的灯灭了而无法扫描。可能需要更换此灯。 |
The scanner device cannot scan because its lamp is turned off. The lamp may need to be replaced. |
1019 | 多层送纸。无法扫描一个或多个文稿页面。请重新加载,然后再次扫描这些页面。 |
Multi-feed. One or more document pages couldn't be scanned. Reload and scan again these pages. |
1020 | 未找到扫描仪设备。请确保设备处于联机状态,与电脑正确连接并在这台电脑上安装了适合的 WIA 2.0 兼容驱动程序。 |
No scanner devices found. Please ensure that the device is online, correctly connected to the PC and has a suitable WIA 2.0 compatible driver locally installed on this PC. |
2000 | 不支持一个或多个请求的扫描设置。请保留一个扫描设置或形成特定的设置组合。 |
One or more requested scan settings are not supported, alone or in this particular combination. |
2002 | 这个扫描仪设备的 WIA 驱动程序不具备此 API 要求的任何输入源: 平板(WIA_CATEGORY_FLATBED)、送纸器(WIA_CATEGORY_FEEDER),或自动(WIA_CATEGORY_AUTO)。 |
The WIA driver for this scanner device does not have any input sources required by this API: Flatbed (WIA_CATEGORY_FLATBED), Feeder (WIA_CATEGORY_FEEDER), or Auto (WIA_CATEGORY_AUTO). |
2003 | 这个扫描仪设备的 WIA 驱动程序不支持该扫描源要求的任何颜色模式。因此,该扫描源无法初始化并且无法用于此扫描会话。 |
The WIA driver for this scanner device does not support any of the required color modes for this scan source. As a result this scan source cannot be initialized and used in this scan session. |
2004 | 选定的扫描源当前不可用。请尝试用此设备启动新的扫描会话,关闭电源再重新打开电源,或者断开设备然后重新连接,或者尝试使用其他扫描源。 |
The selected scan source is not currently available. Try to start a new scan session with the device, power cycle or disconnect and reconnect the device, or try to use a different scan source. |
2005 | 选定的扫描源不支持扫描预览。 |
The selected scan source does not support scan preview. |
2006 | 扫描操作已取消。 |
The scan operation was canceled. |