adamuninstall.exe Active Directory Lightweight Directory Services Uninstaller 557c16485de8e75866a7ceb8c159c4e5

  1. File Info
  2. MUI

File info

File name: adamuninstall.exe.mui
Size: 27136 byte
MD5: 557c16485de8e75866a7ceb8c159c4e5
SHA1: b5e65edfe88ff300e0c003d43608d1a33acb33c4
SHA256: 0969c4f8f9b9749405bf93a9bf00b3da47aecf8e5c15dd51eecf6fd1442543bd
Operating systems: Windows 10
Extension: MUI
In x64: adamuninstall.exe Active Directory Lightweight Directory Services Uninstaller (32 位元)

Translations messages and strings

If an error occurred or the following message in Chinese (Traditional) language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id Chinese (Traditional) English
100Active Directory 輕量型目錄服務移除精靈 Active Directory Lightweight Directory Services Removal Wizard
101如果您繼續的話，將從這個電腦上永久移除 AD LDS 執行個體 %1。您想要繼續嗎? If you continue, AD LDS instance %1 will be permanently removed from this computer. Do you want to continue?
102未啟動精靈。 The wizard did not start.
115如果您繼續的話，將從這個電腦上永久移除 AD LDS 系統管理工具。您想要繼續嗎? If you continue, the AD LDS administration tools will be permanently removed from this computer. Do you want to continue?
116已成功移除 AD LDS，但是在移除過程中有一些問題。請檢視下列列出的警告。 AD LDS was successfully removed, but there were some problems during removal. Please review the warnings listed below.
117已成功移除 AD LDS。 AD LDS was successfully removed.
118必須等到您重新啟動 Windows 之後，才會刪除部分暫存檔案。 Some temporary files will not be deleted until you restart Windows.
119

下列操作已成功:

%1

The following operations succeeded:

%1
120

%1

%1
121AD LDS 已成功地移除。

%1

警告:

%2		 AD LDS was removed successfully.

%1

Warnings:

%2
122無法成功移除 AD LDS。 AD LDS could not be successfully removed.
123必要時停用 Active Directory Web 服務 ... Disabling Active Directory Web Services if necessary ...
124無法停用 Active Directory Web 服務。錯誤是: %1 Failed to disable Active Directory Web Services. The error was: %1
2000AD LDS ADSI 編輯器 AD LDS ADSI Edit
2001AD LDS 的低層 Active Directory 網域服務服務介面編輯器。 A low level Active Directory Services Interface editor for AD LDS.
2002AD LDS 說明 AD LDS Help
2006AD LDS 工具命令提示字元 AD LDS Tools Command Prompt
2007開啟 AD LDS 命令提示字元 Open AD LDS Command Prompt
5100正在刪除機碼 %1\%2... Deleting key %1\%2...
5101正在刪除檔案 %1... Deleting file %1...
5102正在移除資料夾 %1... Removing folder %1...
5103正在取消 AD LDS 執行個體 %1... Cancelling AD LDS instance %1...
5105必要的移除檔案沒有包含任何操作。 A required removal file did not contain any operations.
5106無法刪除登錄機碼 '%1'。
%2		 Registry key '%1' could not be deleted.
%2
5107無法刪除檔案 '%1'。
%2		 File '%1' could not be deleted.
%2
5108無法刪除資料夾 '%1'。
%2		 Folder '%1' could not be deleted.
%2
5109無法移除目錄服務。
%1		 The directory service could not be removed.
%1
5111正在解除登錄 %1... Unregistering %1...
5112無法解除登錄元件 '%1'。
%2		 Component '%1' could not be unregistered.
%2
5113正在蒐集必要的資訊... Gathering required information...
5114正在準備移除 AD LDS... Preparing to remove AD LDS...
5115正在移除 AD LDS... Removing AD LDS...
5200無法儲存登錄機碼 '%1': %2 The registry key '%1' could not be saved: %2
5201無法還原登錄機碼 '%1': %2 The registry key '%1'could not be restored: %2
5202無法刪除檔案 '%1': %2 The file '%1' could not be deleted: %2
5203無法移動檔案 '%1': %2 The file '%1' could not be moved: %2
5204無法還原檔案 '%1': %2 The file '%1' could not be restored: %2
5206無法移動資料夾 '%1': %2 The folder '%1' could not be moved: %2
5207無法還原資料夾 '%1': %2 The folder '%1' could not be restored: %2
5208無法刪除資料夾 '%1': %2 The folder '%1' could not be deleted: %2
5209無法從登錄移除元件 '%1': %2 The component '%1' could not be removed from the registry: %2
5210無法登錄元件 '%1': %2 The component '%1' could not be registered: %2
5211無法從封存移除元件 '%1': %2 The component '%1' could not be removed from the archive: %2
5212找不到目前 AD LDS 安裝的備份。 No backup for the current AD LDS installation was found.
5213無法刪除登錄機碼 '%1': %2 The registry key '%1' could not be deleted: %2
5214無法讀取登錄值 '%1:%2': %3 The registry value '%1:%2' could not be read: %3
5215無法開啟登錄機碼 '%1': %2 The registry key '%1' could not be opened: %2
5300Active Directory 輕量型目錄服務允許遠端 LDAP 流量的輸入規則。[TCP] Inbound rule for Active Directory Lightweight Directory Services to allow remote LDAP traffic. [TCP]
5301Active Directory 輕量型目錄服務允許遠端安全 LDAP 流量的輸入規則。[TCP] Inbound rule for Active Directory Lightweight Directory Services to allow remote Secure LDAP traffic. [TCP]
5302Active Directory 輕量型目錄服務允許透過 RPC/TCP 進行遠端管理的輸入規則。 Inbound rule for Active Directory Lightweight Directory Services to allow remote management via RPC/TCP.
5303RPCSS 服務允許 Active Directory 輕量型目錄服務的 RPC/TCP 流量的輸入規則。 Inbound rule for the RPCSS service to allow RPC/TCP traffic for Active Directory Lightweight Directory Services.
5304Active Directory 輕量型目錄服務的輸出規則。[TCP] Outbound rule for Active Directory Lightweight Directory Services. [TCP]
5305Active Directory 輕量型目錄服務 - %1 Active Directory Lightweight Directory Services - %1
7001因為系統錯誤，AD LDS 安裝程式無法從自動安裝檔案 %1 中刪除密碼資訊。該檔案可能還包含密碼。要減低安全性弱點，請在 AD LDS 安裝程式完成後刪除該檔案。AD LDS 安裝程式遇到的系統錯誤是: AD LDS Setup was unable to delete password information from the unattended installation file, %1, because of a system error. The file might still contain passwords. To minimize security vulnerability, ensure that the file was deleted after AD LDS Setup completed. The system error encountered by AD LDS Setup was:
7002您必須為使用者名稱加上網域或電腦名稱，讓它成為合格名稱。

範例: 電腦1\使用者名稱
範例: 網域\使用者名稱
範例: 使用者名稱@domain.company.com		 You must qualify the user name with a domain or computer name.

Example: COMPUTER1\UserName
Example: DOMAIN\UserName
Example: [email protected]
8000略過的操作:
%1
要完成:
%2		 Operation Skipped:
%1
To Complete:
%2
8001下列目錄分割只跟此 AD LDS 執行個體相關聯。如果您移除此執行個體，將永久刪除這些目錄分割。您確定要移除這個 AD LDS 執行個體嗎? The following directory partitions are associated only with this instance of AD LDS. If you remove this instance, these directory partitions will be permanently deleted. Are you sure you want to remove this instance of AD LDS?
8002AD LDS 執行個體 %1 是此組態集的最後一個執行個體。如果您移除執行個體，也會移除組態集。您確定要移除這個執行個體嗎? The AD LDS instance %1 is the last instance in this configuration set. If you remove the instance, you will also remove the configuration set. Are you sure you want to remove this instance?
8003略過的操作:
%1		 Operation Skipped:
%1
9020Microsoft JhengHei UI Verdana
902112 12
9022700 700
20001已取消 AD LDS 安裝程式。 AD LDS Setup was cancelled.
20002您沒有執行 AD LDS 安裝程式的正確權限。要取得詳細資訊，請連絡您的系統管理員。 You do not have the correct permissions to run AD LDS Setup. For more information, contact your system administrator.
20003輸入給 ShowOrHideProgressGUI 的值不是 'Show' 或 'Hide'。目前的值設定成 'Hide'。若要變更此值，請更新自動安裝檔案，然後再次執行安裝。 The value entered for ShowOrHideProgressGUI is not 'Show' or 'Hide'. The current value is set to 'Hide'. To change this value, update the unattended installation file, and run Setup again.
20004輸入給 InstallType 的值不是 'Unique' 或 'Replica'。目前的值設定成 'Unique'。若要變更此值，請更新自動安裝檔案，再次執行安裝程式。 The value entered for InstallType is not 'Unique', or 'Replica'. The current value is set to 'Unique'. To change this value, update the unattended installation file, and run Setup again.
20005執行個體名稱不正確。執行個體名稱只可以包含 a-z、A-Z 和 0-9，或下列特殊字元: 連字號 (-)。 The instance name is not valid. An instance name can contain characters only in the ranges a-z, A-Z, and 0-9 or the following special character: hyphen (-).
20006執行個體名稱太長。請輸入小於 %1!d! 個字元的名稱。 The instance name is too long. Type a name that is fewer than %1!d! characters.
20007名稱 '%1' 已經用來做為 AD LDS 執行個體的名稱。請輸入不同的執行個體名稱。 The name '%1' is already in use as an AD LDS instance name. Type a different instance name.
20008輸入給 LocalLDAPPortToListenOn 的值不是數字。在自動安裝檔案中，請在此欄位輸入 389 或是介於 1025 和 65535 之間的數字，然後再次執行安裝。 The value entered for LocalLDAPPortToListenOn is not a number. In the unattended setup file, type either 389 or a number between 1025 and 65535 in this field, and then run Setup again.
20009輸入給 LocalLDAPPort 的值不是 389 或是介於 1025 和 65535 之間。在自動安裝檔案中，請在此欄位輸入正確的連接埠號碼，然後再次執行安裝。 The value entered for LocalLDAPPort is not 389 or between 1025 and 65535. In the unattended setup file, type a valid port number in this field, and then run Setup again.
20010輸入給 LocalLDAPPort 的值已在使用中。在自動安裝檔案中，請在此欄位輸入唯一的連接埠號碼，然後再次執行安裝。 The value entered for LocalLDAPPort is in use. In the unattended setup file, type a unique port number in this field, and then run Setup again.
20011輸入給 LocalSSLPortToListenOn 的值不是數字。在自動安裝檔案中，請在此欄位輸入數字，然後再次執行安裝。 The value entered for LocalSSLPortToListenOn is not a number. In the unattended setup file, type a number in this field, and then run Setup again.
20012輸入給 LocalSSLPort 的值不是 636 或介於 1025 和 65535 之間。在自動安裝檔案中，請在此欄位輸入正確的連接埠號碼，然後再次執行安裝。 The value entered for LocalSSLPort is not 636 or between 1025 and 65535. In the unattended setup file, type a valid port number in this field, and then run Setup again.
20013輸入給 LocalSSLPort 的值已在使用中。在自動安裝檔案中，請在此欄位輸入唯一的值，然後再次執行安裝。 The value entered for LocalSSLPort is in use. In the unattended setup file, type a unique value in this field, and then run Setup again.
20014輸入給 SourceServer 的值不是電腦名稱。在自動安裝檔案中，請在此欄位輸入正確的電腦名稱，然後再次執行安裝。 The value entered for SourceServer is not a computer name. In the unattended setup file, type a valid computer name in this field, and then run Setup again.
20015AD LDS 沒有在來源伺服器的指定 LDAP 連接埠上執行。請在這些欄位輸入來源伺服器和有效的組態集連接埠，然後重新執行安裝程式。 AD LDS is not running on the specified LDAP port of the source server. Enter the source server and port of a valid configuration set in these fields, and then run Setup again.
20016輸入給 SourceLDAPPort 的值不是數字。在自動安裝檔案中，請在此欄位輸入數字，然後再次執行安裝。 The value entered for SourceLDAPPort is not a number. In the unattended setup file, type a number in this field, and then run Setup again.
20017沒有在 SourceUsername 欄位輸入任何值。

如果您是選取組態集的系統管理員，您可以從自動安裝檔案中移除 SourceUsername 欄位或在 Sourceusername 欄位輸入正確的帳戶。如果您不是選取組態集的系統管理員，您必須在 SourceUsername 欄位中輸入正確的使用者帳戶。

在您更新過自動安裝檔案後，再次執行安裝。		 No value was entered in the SourceUsername field.

If you are an administrator of the selected configuration set, you can remove the SourceUsername field from the unattended setup file or type a valid account in the Sourceusername field. If you are not an administrator of the selected configuration set, you must type a valid user account in the SourceUsername field.

After you have updated the unattended setup file, run Setup again.
20018複寫認證不正確或不足。請輸入在指定的伺服器上有複寫權限的帳戶認證。 The replication credentials are not valid or are insufficient. Type the credentials of an account that has replication permissions for the specified server.
20019NewApplicationPartitionToCreate 的值不是辨別名稱。請在此欄位輸入辨別名稱，然後再次執行安裝。辨別名稱包含一個「屬性類型=屬性值」的順序組對並用逗號分隔。每個屬性值限制在 256 個字元。範例辨別名稱: DC=Woodgrove,DC=COM The value for NewApplicationPartitionToCreate is not a distinguished name. Type a distinguished name in this field, and then run Setup again. A distinguished name consists of an ordered set of "attribute type=attribute value" pairs separated by commas. Each attribute value is limited to 256 characters. Example distinguished name: DC=Woodgrove,DC=COM
20020輸入給 Administrator 的值不是正確的使用者帳戶。在自動安裝檔案中，請在 Administrator 欄位輸入正確的使用者帳戶，然後再次執行安裝。 The value entered for Administrator is not a valid user account. In the unattended setup file, type a valid user account in the Administrator field, and then run Setup again.
20021輸入給 ApplicationPartitionsToReplicate 的值不是正確的語法。在自動安裝檔案中，請輸入一或多個正確的應用程式目錄分割名稱，然後再次執行安裝。每個分割名稱應該被括號括住。要複寫所有存在於複本來源上的應用程式目錄分割，請輸入“*”。 The value entered for ApplicationPartitionsToReplicate does not have correct syntax. In the unattended setup file, type one or more valid application directory partition names, and then run Setup again. Each partition name should be enclosed in quotation marks. To replicate all application directory partitions that exist on the replica source, type “*”.
20022發生內部錯誤，必須結束 AD LDS 安裝程式。 An internal error has occurred and AD LDS Setup must close.
20023所選取要用來儲存 AD LDS 檔案的資料夾 %1 跟 Windows 安裝資料夾相同。
請選取不同的資料夾。		 The folder selected to store the AD LDS files, %1, is the same as the Windows installation folder.
Select a different folder.
20024所選取要用來儲存 AD LDS 檔案的資料夾 %1 跟 Windows 系統資料夾相同。
請選取不同的資料夾。		 The folder selected to store the AD LDS files, %1, is the same as the Windows system folder.
Select a different folder.
20025資料夾 %1 的路徑格式不正確。請指定正確且包括磁碟機代號的資料夾路徑。範例路徑: C:\NTDS。 The path to the folder %1 is not in a valid format. Specify a valid folder path, including the drive letter. Example path: C:\NTDS.
20026資料夾名稱 %1 包含下列不能用在資料和資料修復資料夾上的字元:

%2

請選擇其他資料夾名稱。		 The folder name %1 includes the following characters that are not allowed for the data and data recovery folders:

%2

Choose another folder name.
20027資料夾 %1 並未參照到正確的硬碟。請選取硬碟上的資料夾。 The folder %1 does not refer to a valid hard disk. Select a folder on a hard disk drive.
20028資料夾 %1 參照不是格式化成 NTFS 檔案系統的磁碟。因為此資料夾可以在多部電腦的 AD LDS 伺服器間複寫，所以必須是 NTFS。請選取位於格式化成 NTFS 磁碟的資料夾。

若要將格式化為 FAT 檔案系統的磁碟轉換成 NTFS 檔案系統，請使用 Convert.exe 命令列工具。若要取得有關 Convert.exe 工具的詳細資訊，請參閱 [說明及支援]。		 The folder %1 refers to a drive that is not formatted for the NTFS file system. Because this folder can be replicated among AD LDS servers on multiple computers, NTFS is required. Select a folder on a drive formatted for NTFS.

To convert drives formatted with the FAT file system to the NTFS file system, use the Convert.exe command-line tool. For more information about the Convert.exe tool, see Help and Support.
20029路徑 %1 包含路徑 %2 的掛接磁碟區。請輸入不包含任何掛接磁碟區的路徑。 The path %1 contains a mounted volume on the path %2. Please type a path that does not contain any mounted volumes.
20030路徑 %1 並未參照到資料夾。請選取資料夾。 The path %1 does not refer to a folder. Select a folder.
20031資料夾 %1 已經壓縮。無法在壓縮的資料夾中安裝 AD LDS。請選取其他未經壓縮的資料夾。 The folder %1 is compressed. AD LDS cannot be installed in a compressed folder. Select a folder that is not compressed.
20032資料夾 %1 是加密的。無法在加密的資料夾中安裝 AD LDS。請選取未加密的資料夾。 The folder %1 is encrypted. AD LDS cannot be installed in an encrypted folder. Select a folder that is not encrypted.
20033資料夾 %1 不是空的。請選取空的資料夾來儲存 AD LDS 安裝檔案。 The folder %1 is not empty. Select an empty folder to store AD LDS installation files.
20034磁碟區 %1 沒有足夠的可用磁碟空間。至少需要 %2!u! MB 的可用空間才能繼續。 There is insufficient free disk space on volume %1. At least %2!u! MB of free disk space is required to proceed.
20035您沒有正確的權限可存取資料夾 %1。要取得詳細資訊，請連絡您的系統管理員。 You do not have the correct permissions to access the folder %1. For more information, contact your system administrator.
20036請為選取的服務帳戶輸入正確的使用者名稱和密碼。 Type a valid user name and password for the selected service account.
20037選取的帳戶沒有權限以服務的身分執行。在繼續前，請選取具有適當權限的帳戶，或更新選取的帳戶。若要更新此帳戶以服務的身分執行，請在本機安全性設定主控台中修改它的設定。 The selected account does not have permission to run as a service. Before continuing, select an account with the appropriate permissions, or update the selected account. To update this account to run as a service, modify its settings in the Local Security Settings console.
20038%1 %1
20039記憶體不足，無法完成操作。請儲存您的工作，關閉其他程式，然後再試一次。 There is not enough memory to complete the operation. Save your work, close other programs, and then try again.
20040Active Directory 安裝已在進行中。 An Active Directory installation is already in progress.
20041因為下列錯誤，無法建立移除記錄:

%1		 The removal log could not be created because of the following error:

%1
20042ShowInAddRemovePrograms 的值必須是 'Show' 或 'Hide' Value for ShowInAddRemovePrograms must be 'Show' or 'Hide'
20043無法為「新增/移除程式」元件產生唯一登錄機碼名稱，所以安裝失敗。 The install failed because a unique registry key name could not be generated for the 'Add/Remove Programs' component.
20045在使用備份檔案將新 AD LDS 執行個體加入組態集之前，請確認在自動安裝檔案中已設定下列值: ReplicationDataSourcePath 和 ReplicationLogSourcePath。 Before using backup files to add a new instance of AD LDS to a configuration set, ensure that the following values have been set in the unattended setup file: ReplicationDataSourcePath and ReplicationLogSourcePath.
20046沒有輸入 ReplicationDataSourcePath 的值。在自動安裝檔案中，在此欄位指定包含已還原的 AD LDS 資料的資料夾，然後再次執行安裝程式。 No value was entered for ReplicationDataSourcePath. In the unattended setup file, specify a folder that contains the restored AD LDS data in this field, and then run Setup again.
20047包含已還原的 AD LDS 資料的資料夾不存在。請指定正確且包括磁碟機代號的路徑。範例資料夾路徑: C:\restored\data。 The folder that contains the restored AD LDS data does not exist. Specify a valid path, including the drive letter. Example folder path: C:\restored\data.
20048包含已還原的 AD LDS 資料的資料夾沒有儲存在本機磁碟機上。請指定本機磁碟機上的資料夾。 The folder that contains the restored AD LDS data is not stored on a local drive. Specify a folder on a local drive.
20049包含已還原的 AD LDS 資料的資料夾中沒有 Adamntds.dit 檔案。請指定已還原的 .dit 檔案的正確路徑。 The folder that contains the restored AD LDS data is missing the file Adamntds.dit. Specify the correct path to the restored .dit file.
20050沒有輸入 ReplicationLogSourcePath 的值。在自動安裝檔案中，在此欄位指定包含已還原的 AD LDS 資料修復檔案的資料夾，然後再次執行安裝程式。 No value was entered for ReplicationLogSourcePath. In the unattended setup file, specify a folder that contains the restored AD LDS data recovery files in this field, and then run Setup again.
20051包含已還原的 AD LDS 資料修復資料夾的資料夾不存在。請指定正確且包括磁碟機代號的路徑。範例資料夾路徑: C:\restored\log。 The folder that contains the restored AD LDS data recovery folder does not exist. Specify a valid path, including the drive letter. Example folder path: C:\restored\log.
20052包含已還原的 AD LDS 資料修復檔案的資料夾沒有儲存在本機磁碟機上。請指定本機磁碟機上的資料夾。 The folder that contains restored AD LDS data recovery files is not stored on a local drive. Specify a folder on a local drive.
20053包含已還原的 AD LDS 資料修復檔案的資料夾中沒有 Edb.log 檔案。請指定到已還原的 .log 檔案的正確路徑或保留路徑為空。 The folder that contains the restored AD LDS data recovery files is missing the file Edb.log. Specify the correct path to the restored .log file or leave the path empty.
20054這個版本的 AD LDS 無法在 64 位元的電腦上執行。要在 64 位元的電腦上執行 AD LDS，請安裝 64 位元版本的 AD LDS。 This version of AD LDS cannot run on 64-bit computers. To run AD LDS on an 64-bit computer, install the 64-bit version of AD LDS.
20055在安裝過程中建立的應用程式分割必須有下列根元件的物件類別之一: C、CN、DC、L、O，OU。請輸入一個符合此條件的 DN。 Application partitions created during setup must have one of the following object classes for the root component: C, CN, DC, L, O, OU. Please enter a DN that fits this criteria.
20056您必須為複寫帳戶的使用者名稱加上網域或電腦名稱，讓它成為合格名稱。

範例: 電腦1\使用者名稱
範例: 網域\使用者名稱
範例: 使用者名稱@domain.company.com		 The user name of the replication account must be qualified by a domain or computer name.

Example: COMPUTER1\UserName
Example: DOMAIN\UserName
Example: [email protected]
20057使用者已取消解除安裝。 The user cancelled the uninstall.
20058解除安裝 AD LDS 執行個體。

adamuninstall [/q] [/answer:filename] [/force] /i:instanceName

/q 在安靜模式下執行。
/answer 使用自動安裝指令碼檔案。
/force 解除安裝時忽略警告訊息。
/i 移除具有這個名稱的 AD LDS 執行個體。		 Uninstalls AD LDS instance.

adamuninstall [/q] [/answer:filename] [/force] /i:instanceName

/q Run quietly.
/answer Use the unattended script file.
/force Ignore warnings during uninstall.
/i Remove the AD LDS instance with this name.
20059此電腦上未安裝您嘗試要移除的 AD LDS 執行個體 %1。 The AD LDS instance you are trying to remove, %1, is not installed on this computer.
20060找不到 AD LDS 執行個體 '%1' 的正確復原記錄。無法完成解除安裝。 A valid undo log could not be found for AD LDS instance '%1'. Uninstall cannot complete.
20061無法開啟復原記錄 %1。無法完成解除安裝。 The undo log %1 could not be opened. Uninstall cannot complete.
20066您沒有正確的權限可執行 AD LDS 移除精靈。要取得詳細資訊，請連絡您的系統管理員。 You do not have the correct permissions to run the AD LDS Removal Wizard. For more information, contact your system administrator.
20067移除精靈無法移除所有元件。要完全移除，請在解決下列錯誤後執行 "Adamuninstall.exe /i:":
%1		 The removal wizard was not able to remove all of the components. To complete removal, run "Adamuninstall.exe /i:" after resolving the following error:
%1
20068內部程式發生錯誤。程式必須結束。 An internal program error has occurred. The program must quit.
20069檔案 %1 不在安裝資料夾 %2 中。沒有這個檔案就無法安裝 AD LDS。請找到這個檔案，並將它複製到包含 Adaminstall.exe 的資料夾中。 The file %1 is not in the installation folder %2. AD LDS cannot be installed without this file. Locate the file, and then copy it to the folder that contains Adaminstall.exe.
20071因為找不到自動安裝檔案 %1，AD LDS 安裝程式無法繼續。請確認此檔案存在，然後再次執行安裝程式。 AD LDS Setup cannot continue because the unattended installation file, %1, was not found. Verify that the file exists, and then try running Setup again.
20072路徑 '%1' 太長。請指定少於 %2!d! 個字元的路徑。 The path '%1' is too long. Specify a path shorter than %2!d! characters.
20073因為系統資料夾路徑太長，所以無法在此電腦上安裝 AD LDS。 AD LDS could not be installed on this computer because the system folder path is too long.
20074在這部伺服器上安裝 Active Directory 輕量型目錄服務 (AD LDS) 執行個體。

命令列參數包含:

/answer:filename [/quiet]
/adv
/strict
/?[:answer]

/answer 是用來提供自動安裝指令檔。
/quiet 是用來指定自動安裝的安靜模式。
/adv 啟用進階使用者選項。
/strict 會讓安裝公用程式將警告視為錯誤。
/? 顯示這個說明。
/?:answer 顯示可以指定以設定 AD LDS 執行個體之各種選項的說明。		 Installs an Active Directory Lightweight Directory Services (AD LDS) instance on this server.

Command line parameters include:

/answer:filename [/quiet]
/adv
/strict
/?[:answer]

/answer is used to supply an unattend install script file.
/quiet is used to specify a quiet mode for an unattended installation.
/adv enables advanced user options.
/strict makes the setup utility treat warnings as errors.
/? displays this help.
/?:answer displays help on the various options that can be specified to set up an AD LDS instance.
20075您已成功從此電腦移除 AD LDS 執行個體 %1。但要等您重新啟動 Windows 之後，才會刪除一些暫存檔案。 You have successfully removed the AD LDS instance %1 from this computer. However, some temporary files will not be deleted until you restart Windows.
20077選取電腦的安全性原則會防止 AD LDS 使用有空白密碼的服務帳戶。請選取不同的帳戶來當作 AD LDS 服務帳戶。 The security policy of the selected computer prevents AD LDS from using a service account with a blank password. Select a different account to use as the AD LDS service account.
20078AD LDS 無法以選取的帳戶執行，因為該帳戶沒有系統管理權限。這個版本的 Windows 需要系統管理權限才能獨佔使用連接埠。請選取不同的帳戶來當作 AD LDS 服務帳戶。 AD LDS cannot run as the selected account because the account does not have administrative permissions. Administrative permissions are required by this version of Windows to exclusively use a port. Select a different account as the AD LDS service account.
20079選取的帳戶沒有權限以服務的身分執行。在繼續前，請選取具有適當權限的帳戶，或更新選取的帳戶。若要更新此帳戶以服務的身分執行，請在網域控制站安全性設定主控台中修改它的設定。 The selected account does not have permission to run as a service. Before continuing, select an account with the appropriate permissions, or update the selected account. To update this account to run as a service, modify its settings in the Domain Controller Security Settings console.
20080AD LDS 安裝程式無法為選取的帳戶新增登入成服務的權限。請選取不同的帳戶來當作 AD LDS 服務帳戶。 AD LDS Setup cannot add the Log on as service permission to the selected account. Select a different account to use as the AD LDS service account.
20081這個 AD LDS 執行個體的服務帳戶無法跟選取的組態集一起使用。帳戶驗證失敗，錯誤如下:
錯誤 0x%1!x!
%2

請選取不同的服務帳戶，然後再試一次。要取得有關 AD LDS 服務帳戶的詳細資訊，請參閱 AD LDS 說明裡的＜選取服務帳戶＞。		 The service account for this instance of AD LDS cannot be used with the selected configuration set. The account failed validation with the following error:
Error 0x%1!x!
%2

Select a different service account, and then try again. For more information about AD LDS service accounts, see "Selecting a service account" in AD LDS Help.
20082檔案 %1 不是允許的 LDIF 檔案。 The file %1 is not an allowed LDIF file.
20083因為無法成功匯入一或多個 LDIF 檔案，所以無法完成 AD LDS 安裝程式。 AD LDS Setup did not complete because one or more LDIF files could not be imported successfully.
20084SourceUsername 欄位沒有輸入任何值。

如果您是此 AD LDS 執行個體的系統管理員，您可以從自動安裝檔案中移除 SourceUsername 欄位。如果您不是此 AD LDS 執行個體的系統管理員，請在 SourceUsername 和 SourcePassword 欄位中為擁有 AD LDS 系統管理權限的帳戶輸入認證。

在您更新過自動安裝檔案後，再次執行安裝程式。		 No value was entered in the SourceUsername field.

If you are an administrator of this AD LDS instance, you can remove the SourceUsername field from the unattended setup file. If you are not an administrator of this AD LDS instance, type the credentials for an account with administrative permissions for AD LDS in the SourceUsername and SourcePassword fields.

After you have updated the unattended setup file, run Setup again.
20085您必須是此 AD LDS 執行個體的系統管理員才能匯入 LDIF 檔案。在自動安裝檔案中的 SourceUsername 和 SourcePassword 的欄位中為擁有 AD LDS 系統管理權限的帳戶輸入認證。

在您更新過自動安裝檔案後，再次執行安裝程式。		 You must be an administrator of this AD LDS instance to import LDIF files. In the unattended setup file, in the SourceUsername and SourcePassword fields, type the credentials of an account with administrative permissions for AD LDS.

After you have updated the unattended setup file, run Setup again.
20086您必須為在 [SourceUsername] 欄位中輸入的使用者名稱加上網域或電腦名稱，讓它成為合格名稱。在自動安裝檔案中，為使用者名稱加上網域或電腦名稱，讓它成為合格名稱。

範例: 電腦1\使用者名稱
範例: 網域\使用者名稱
範例: 使用者名稱@domain.company.com

在您更新自動安裝檔案後，再次執行安裝。		 The user name entered in the SourceUsername field must be qualified with a domain or computer name. In the unattended setup file, qualify the user name with a domain or computer name.

Example: COMPUTER1\UserName
Example: DOMAIN\UserName
Example: [email protected]

After you have updated the unattended setup file, run Setup again.
20087因為提供給匯入 LDIF 檔案的帳戶無法使用，所以無法完成 AD LDS 安裝程式。可能是認證不正確，或是帳戶沒有 AD LDS 的系統管理權限。 AD LDS Setup could not complete because the account supplied for LDIF file importation could not be used. Either the credentials were not valid, or the account did not have administrative permissions for AD LDS.
20088路徑 '%1' 不正確。要在此版本的 Windows 安裝 AD LDS，路徑必須與資料資料夾位於相同磁碟區。請輸入位於磁碟區 '%2' 的路徑。 The path '%1' is not valid. To install AD LDS on this version of Windows, the path must be on the same volume as the data folder. Please type a path that is on the volume '%2'.
20089%1
錯誤碼: 0x%2!x!
%3		 %1
Error code: 0x%2!x!
%3
20090因為下列錯誤，安裝無法啟動服務 '%1':
錯誤碼: 0x%2!x!
%3		 Setup could not start the service '%1' because of the following error:
Error code: 0x%2!x!
%3
20091AD LDS 安裝精靈比這個電腦安裝的 AD LDS 檔案還要舊。只有較新版本的 AD LDS 安裝程式才能在此電腦上執行。 The AD LDS Setup Wizard is older than AD LDS files that are already installed on this computer. Only a more recent version of AD LDS Setup will run on this computer.
20099"NTDS" 不是正確的執行個體名稱。請輸入不同的名稱。 "NTDS" is not a valid instance name. Type a different name.
20100沒有正確指定選取用來匯入的 LDIF 檔案。在自動安裝檔案中，在 ImportLDIFFiles 欄位中指定 LDIF 檔案。每個檔案必須用括號括住並用空格分隔檔案名稱。 The LDIF files selected for importing are not specified correctly. In the unattended setup file, specify the LDIF files using the ImportLDIFFiles field. Each file name must be in quotes and the file names must be separated by a space.
20101AD LDS 安裝精靈在此電腦上找到發行前版本的 AD LDS。請移除所有安裝的 AD LDS 執行個體並再次執行 AD LDS 安裝程式。 The AD LDS Setup Wizard found a pre-release version of AD LDS installed on this computer. Please remove all installed AD LDS instances and run AD LDS Setup again.
20102因為找不到自動移除檔案 %1，所以移除精靈無法繼續。請確認檔案存在，然後再次嘗試移除 AD LDS。 The removal wizard cannot continue because the unattended removal file, %1, was not found. Verify that the file exists, and then try removing AD LDS again.
20103您必須為在 [Administrator] 欄位中輸入的使用者名稱加上網域或電腦名稱，讓它成為合格名稱。在自動安裝檔案中，為使用者名稱加上網域或電腦名稱，讓它成為合格名稱。

範例: 電腦1\使用者名稱
範例: 網域 \使用者名稱
範例: 使用者名稱@domain.company.com

在您更新自動移除檔案後，再次嘗試移除 AD LDS。		 The user name entered in the Administrator field must be qualified with a domain or computer name. In the unattended removal file, qualify the user name with a domain or computer name.

Example: COMPUTER1\UserName
Example: DOMAIN\UserName
Example: [email protected]

After you have updated the unattended removal file, try removing AD LDS again.
20104AD LDS 安裝程式無法驗證選取的服務帳戶。
錯誤碼: 0x%1!x!
%2		 AD LDS Setup was unable to validate the selected service account.
Error code: 0x%1!x!
%2
20105由於 TCP/IP 未正常運作，因此 AD LDS 安裝程式無法繼續。 AD LDS Setup cannot continue because TCP/IP is not functioning.
20106AD LDS 安裝程式需要回應檔案。 AD LDS Setup requires an answer file.
20107下列是可以指定的自動參數清單，用以安裝新的 AD LDS 執行個體 (預設值會以 括住):
The following is a list of unattend parameters that can be specified to install a new AD LDS instance (default values are enclosed in ):
20108/InstallType:{ | replica}
選用。指定是否建立新的唯一 AD LDS 執行個體，或是否複寫整個或局部現有 AD LDS 執行個體 (透過網路或已還原的備份媒體)，以建立新執行個體。
/InstallType:{ | replica}
Optional. Specifies whether a new unique AD LDS instance is created or whether a new instance is created by replicating all or part of an existing AD LDS instance, either over the network or from a restored backup medium.
20109/ShowOrHideProgressGUI:{Show | }
選用。指定 AD LDS 安裝程式是否應該在安裝期間顯示進度資訊。
/ShowOrHideProgressGUI:{Show | }
Optional. Specifies whether the AD LDS setup should display progress information during installation.
20110/InstanceName:"執行個體名稱"
選用。指定所建立的執行個體名稱。AD LDS 執行個體預設會命名為 "Instancen"，其中 n 是大於 0 的最小數字，因此 Instancen 在本機電腦上是唯一的。
/InstanceName:"name_of_the_instance"
Optional. Specifies the name of the instance that you are creating. By default, the AD LDS instance is named “Instancen” where n is the lowest number greater than 0 such that Instancen is unique on the local computer.
20111/InstanceDescription:"執行個體描述"
選用。指定執行個體的描述。描述預設會是 "AD LDS instance"。
/InstanceDescription:"description_of_the_instance"
Optional. Specifies a description for the instance. By default, the description will be "AD LDS instance".
20112/ApplicationPartitionsToReplicate:{"要複寫之分割的 DN" | *}
選用。指定從來源 AD LDS 執行個體複寫之應用程式分割的辨別名稱。如果要從來源 AD LDS 執行個體複寫所有應用程式分割，請指定萬用字元。如果您未將 InstallType 值設為 Replica，則 AD LDS 會忽略您在這裡指定的任何值。
/ApplicationPartitionsToReplicate:{"DNs_of_partitions_to_replicate" | *}
Optional. Specifies the distinguished names of the application partitions to replicate from the source AD LDS instance. To replicate all application partitions from the source AD LDS instance, specify a wildcard character. AD LDS ignores any value that you specify here if you do not set the value of InstallType to Replica.
20113/ReplicationSourcePath:"資料來源路徑"
選用。指定 AD LDS 執行個體資料備份的目錄路徑。指定此選項時，AD LDS 安裝程式會嘗試從媒體進行安裝。只有當 InstanceType 設為 Replica，才可以指定此參數。
/ReplicationSourcePath:"path_to_data_source"
Optional. Specifies the directory path to a backup of an AD LDS instance data. When this option is specified, AD LDS setup attempts an installation from media. This parameter can only be specified in cases where InstanceType is set to Replica.
20114/ReplicationLogSourcePath:"記錄來源路徑"
選用。指定 AD LDS 執行個體記錄備份的目錄路徑。只有當 InstanceType 設為 Replica，且 ReplicationSourcePath 具有有效值，才可以指定此參數。
/ReplicationLogSourcePath:"path_to_logs_source"
Optional. Specifies the directory path to a backup of an AD LDS instance logs. This parameter can only be specified in cases where InstanceType is set to Replica and ReplicationSourcePath has a valid value.
20115/LocalLDAPPortToListenOn:{連接埠號碼: 389 或 1025 與 65535 (含) 之間的任意未使用連接埠號碼}
必要。指定要接聽的本機 LDAP 連接埠。
/LocalLDAPPortToListenOn:{port_number: 389 or any unused port number between 1025 and 65535, inclusive}
Required. Specifies the local LDAP port to listen on.
20116/LocalSSLPortToListenOn:{連接埠號碼: 636 或 1025 與 65535 (含) 之間的任意未使用連接埠號碼}
必要。指定要接聽的本機 SSL 連接埠。
/LocalSSLPortToListenOn:{port_number: 636 or any unused port number between 1025 and 65535, inclusive}
Required. Specifies the local SSL port to listen on.
20117/SourceServer:"來源伺服器 DNS 或 NetBIOS 名稱"
進行複本安裝時為必要項目。指定要從中複寫資料的伺服器。
/SourceServer:"Source Server DNS or NetBIOS name"
Required for replica installations. Specifies which server to replicate data from.
20118/SourceLDAPPort: {連接埠號碼: 389 或 1025 與 65535 之間的數字}
進行複本安裝的必要項目。指定來源伺服器上使用的連接埠。
/SourceLDAPPort: {port_number: 389 or a number between 1025 and 65535}
Required for replica installations. Specifies the port to use on the source server.
20119/NewApplicationPartitionToCreate:"要建立之應用程式分割的 DN，具有您所指定的名稱"
選用。預設不會建立新的應用程式分割。
/NewApplicationPartitionToCreate:"DN of application partition to create, with the name that you specify"
Optional. By default, no new application partition is created.
20120/DataFilesPath:"路徑名稱"
選用。資料預設會儲存在 "Program Files\Microsoft ADAM\instance_name\data" 中，其中 instance_name 是 AD LDS 執行個體的名稱。
/DataFilesPath:"path_name"
Optional. By default, the data is stored under "Program Files\Microsoft ADAM\instance_name\data" where instance_name is the name of the AD LDS instance.
20121/LogFilesPath:"路徑名稱"
選用。記錄檔預設會儲存在 "Program Files\Microsoft ADAM\instance_name\data" 中，其中 instance_name 是 AD LDS 執行個體的名稱。
/LogFilesPath:"path_name"
Optional. By default, the log files are stored under "Program Files\Microsoft ADAM\instance_name\data" where instance_name is the name of the AD LDS instance.
20122/ServiceAccount:"服務帳戶的名稱"
選用。這個 AD LDS 執行個體所使用服務帳戶的名稱。服務帳戶的名稱可以指定為各種格式:
- DNS 網域名稱，後面接有反斜線，再接著帳戶名稱
- NetBIOS 名稱，後面接有反斜線，再接著帳戶名稱
- 使用者主要名稱 (UPN)
- 僅帳戶名稱
AD LDS 執行個體預設會以 Network Service 帳戶執行。
/ServiceAccount:"name of the service account"
Optional. Name of the service account used by this AD LDS instance. The name of the service account can be specified in various formats:
- DNS domain name, followed by a backslash, and then the account name
- NetBIOS name, followed by a backslash, and then the account name
- User Principal Name (UPN)
- Account name only
By default, the instance of AD LDS runs under the Network Service Account.
20123/AddPermissionsToServiceAccount:{Yes|}
選用。如果指定 Yes，則 AD LDS 安裝程式會嘗試將「以服務方式登入」權利新增到您指定為服務帳戶的帳戶。
/AddPermissionsToServiceAccount:{Yes|}
Optional. If Yes is specified, the AD LDS setup attempts to add the logon as a service right to the account that you specify as the service account.
20124/ServicePassword:"密碼"
指定的 ServiceAccount 不是 Network Service 帳戶時是必要項目。請指定服務帳戶密碼。
/ServicePassword:"password"
Required when the specified ServiceAccount is not the Network Service Account. Specifies the service account password.
20125/Administrator:"系統管理員名稱"
選用。將管理這個 AD LDS 執行個體的使用者名稱。系統管理員名稱可以指定為各種格式:
- DNS 網域名稱，後面接有反斜線，再接著帳戶名稱
- NetBIOS 名稱，後面接有反斜線，再接著帳戶名稱
- 使用者主要名稱 (UPN)
- 僅帳戶名稱
目前登入的使用者預設會擁有這個 AD LDS 執行個體的系統管理員權限。
/Administrator:"administrator name"
Optional. Name of the user that will administer this AD LDS instance. The administrator name can be specified in various formats:
- DNS domain name, followed by a backslash, and then the account name
- NetBIOS name, followed by a backslash, and then the account name
- User Principal Name (UPN)
- Account name only
By default, the currently logged on user will have administrator permissions on this AD LDS instance.
20126/ImportLDIFFiles:"filename.ldf"
選用。指定下列想要匯入 AD LDS 執行個體架構的選用 ldif 檔案: md-User.ldf、ms-InetOrgPerson.ldf、ms-UserProxy.ldf 及 ms-adman.ldf。預設不會匯入上述任何選用 ldif 檔案。
/ImportLDIFFiles:"filename.ldf"
Optional. Specifies which optional ldif files you want to import into the AD LDS instance schema, among: md-User.ldf, ms-InetOrgPerson.ldf, ms-UserProxy.ldf, and ms-adman.ldf. By default, none of these optional ldif files are imported.
20127/SourceUserName:"使用者名稱"
/SourcePassword:"密碼"
選用。指定具有現有組態集系統管理權利之帳戶的使用者名稱及密碼；當您安裝想要加入對應組態集的複本時，應該使用這些參數。AD LDS 預設會使用已登入使用者的認證，將複本加入組態集。
/SourceUserName:"user name"
/SourcePassword:"password"
Optional. Specifies the username and password of an account that has administrative rights for an existing configuration set; you should use these parameters when you install a replicat that you want to join to the corresponding configuration set. By default, AD LDS joins the replica to the configuration set by using the credentials of the logged on user.
20128在回應檔案中指定的組態集層級 (Configuration set level) 無效。請指定有效的值。 The Configuration set level specified in the answer file is invalid. Please specify a valid value.
20129/ConfigurationSetLevel:{|3|4|5}
選用。指定新的唯一 AD LDS 執行個體的設定集層級; 預設是 Windows Server 2003 (2)。無法為複本設定 ConfigurationSetLevel。值 2 指定 Windows Server 2003。值 3 指定 Windows Server 2008。值 4 指定 Windows Server 2008 R2。值 5 指定 %WINDOWS_SERVER_VERSION_6_2%。		 /ConfigurationSetLevel:{|3|4|5}
Optional. Specifies the configuration set level for a new unique AD LDS instance; the default is Windows Server 2003 (2). The ConfigurationSetLevel cannot be set for a replica. A value of 2 specifies Windows Server 2003. A value of 3 specifies Windows Server 2008. A value of 4 specifies Windows Server 2008 R2. A value of 5 specifies %WINDOWS_SERVER_VERSION_6_2%.

EXIF

File Name:adamuninstall.exe.mui
Directory:%WINDIR%\WinSxS\amd64_microsoft-windows-d..m-install.resources_31bf3856ad364e35_10.0.15063.0_zh-tw_e39319372b219460\
File Size:26 kB
File Permissions:rw-rw-rw-
File Type:Win32 DLL
File Type Extension:dll
MIME Type:application/octet-stream
Machine Type:Intel 386 or later, and compatibles
Time Stamp:0000:00:00 00:00:00
PE Type:PE32
Linker Version:14.10
Code Size:0
Initialized Data Size:26624
Uninitialized Data Size:0
Entry Point:0x0000
OS Version:10.0
Image Version:10.0
Subsystem Version:6.0
Subsystem:Windows GUI
File Version Number:10.0.15063.0
Product Version Number:10.0.15063.0
File Flags Mask:0x003f
File Flags:(none)
File OS:Windows NT 32-bit
Object File Type:Executable application
File Subtype:0
Language Code:Chinese (Traditional)
Character Set:Unicode
Company Name:Microsoft Corporation
File Description:Active Directory Lightweight Directory Services Uninstaller
File Version:10.0.15063.0 (WinBuild.160101.0800)
Internal Name:ADAMUNINSTALL
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original File Name:adamuninstall.exe.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0

What is adamuninstall.exe.mui?

adamuninstall.exe.mui is Multilingual User Interface resource file that contain Chinese (Traditional) language for file adamuninstall.exe (Active Directory Lightweight Directory Services Uninstaller).

File version info

File Description:Active Directory Lightweight Directory Services Uninstaller
File Version:10.0.15063.0 (WinBuild.160101.0800)
Company Name:Microsoft Corporation
Internal Name:ADAMUNINSTALL
Legal Copyright:© Microsoft Corporation. All rights reserved.
Original Filename:adamuninstall.exe.mui
Product Name:Microsoft® Windows® Operating System
Product Version:10.0.15063.0
Translation:0x404, 1200