NetPeerDistCim.dll.mui BranchCache WMI Provider - dde45 - MUI - File Info. All about files.

File info

File name:	NetPeerDistCim.dll.mui
Size:	67072 byte
MD5:	54aa5f81d4ef44ebc7e0daa2c94dde45
SHA1:	f574398c1668df973a1e66218d3f86f61c19d451
SHA256:	5a44462470f9cfbc7555eacd30983ff45d153bf907c16b9559631d76cd22499c
Operating systems:	Windows 10
Extension:	MUI

Translations messages and strings

If an error occurred or the following message in Italian language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

Show entries

Search:

id	Italian	English
1	InstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm: : Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and . is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If not null and the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance. If not set to null for DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.	InstanceID is an optional property that may be used to opaquely and uniquely identify an instance of this class within the scope of the instantiating Namespace. Various subclasses of this class may override this property to make it required, or a key. Such subclasses may also modify the preferred algorithms for ensuring uniqueness that are defined below. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm: : Where and are separated by a colon (:), and where must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the _ structure of Schema class names.) In addition, to ensure uniqueness, must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between and . is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If not null and the above "preferred" algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance. If not set to null for DMTF-defined instances, the "preferred" algorithm must be used with the set to CIM.
2	The Caption property is a short textual description (one- line string) of the object.	The Caption property is a short textual description (one- line string) of the object.
3	The Description property provides a textual description of the object.	The Description property provides a textual description of the object.
4	A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information. Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.	A user-friendly name for the object. This property allows each instance to define a user-friendly name in addition to its key properties, identity data, and description information. Note that the Name property of ManagedSystemElement is also defined as a user-friendly name. But, it is often subclassed to be a Key. It is not reasonable that the same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. Note that if there is an associated instance of CIM_EnabledLogicalElementCapabilities, restrictions on this properties may exist as defined in ElementNameMask and MaxElementNameLen properties defined in that class.
5	2.19.0	2.19.0
6	ManagedElement is an abstract class that provides a common superclass (or top of the inheritance tree) for the non-association classes in the CIM Schema.	ManagedElement is an abstract class that provides a common superclass (or top of the inheritance tree) for the non-association classes in the CIM Schema.
7	A datetime value that indicates when the object was installed. Lack of a value does not indicate that the object is not installed.	A datetime value that indicates when the object was installed. Lack of a value does not indicate that the object is not installed.
8	The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.	The Name property defines the label by which the object is known. When subclassed, the Name property can be overridden to be a Key property.
9	Indicates the current statuses of the element. Various operational statuses are defined. Many of the enumeration\'s values are self-explanatory. However, a few are not and are described here in more detail. "Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on. "Predictive Failure" indicates that an element is functioning nominally but predicting a failure in the near future. "In Service" describes an element being configured, maintained, cleaned, or otherwise administered. "No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it. "Lost Communication" indicates that the ManagedSystem Element is known to exist and has been contacted successfully in the past, but is currently unreachable. "Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated. "Dormant" indicates that the element is inactive or quiesced. "Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems. "Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error). "Power Mode" indicates that the element has additional power model information contained in the Associated PowerManagementService association. OperationalStatus replaces the Status property on ManagedSystemElement to provide a consistent approach to enumerations, to address implementation needs for an array property, and to provide a migration path from today\'s environment to the future. This change was not made earlier because it required the deprecated qualifier. Due to the widespread use of the existing Status property in management applications, it is strongly recommended that providers or instrumentation provide both the Status and OperationalStatus properties. Further, the first value of OperationalStatus should contain the primary status for the element. When instrumented, Status (because it is single-valued) should also provide the primary status of the element.	Indicates the current statuses of the element. Various operational statuses are defined. Many of the enumeration\'s values are self-explanatory. However, a few are not and are described here in more detail. "Stressed" indicates that the element is functioning, but needs attention. Examples of "Stressed" states are overload, overheated, and so on. "Predictive Failure" indicates that an element is functioning nominally but predicting a failure in the near future. "In Service" describes an element being configured, maintained, cleaned, or otherwise administered. "No Contact" indicates that the monitoring system has knowledge of this element, but has never been able to establish communications with it. "Lost Communication" indicates that the ManagedSystem Element is known to exist and has been contacted successfully in the past, but is currently unreachable. "Stopped" and "Aborted" are similar, although the former implies a clean and orderly stop, while the latter implies an abrupt stop where the state and configuration of the element might need to be updated. "Dormant" indicates that the element is inactive or quiesced. "Supporting Entity in Error" indicates that this element might be "OK" but that another element, on which it is dependent, is in error. An example is a network service or endpoint that cannot function due to lower-layer networking problems. "Completed" indicates that the element has completed its operation. This value should be combined with either OK, Error, or Degraded so that a client can tell if the complete operation Completed with OK (passed), Completed with Error (failed), or Completed with Degraded (the operation finished, but it did not complete OK or did not report an error). "Power Mode" indicates that the element has additional power model information contained in the Associated PowerManagementService association. OperationalStatus replaces the Status property on ManagedSystemElement to provide a consistent approach to enumerations, to address implementation needs for an array property, and to provide a migration path from today\'s environment to the future. This change was not made earlier because it required the deprecated qualifier. Due to the widespread use of the existing Status property in management applications, it is strongly recommended that providers or instrumentation provide both the Status and OperationalStatus properties. Further, the first value of OperationalStatus should contain the primary status for the element. When instrumented, Status (because it is single-valued) should also provide the primary status of the element.
10	Unknown	Unknown

Showing 1 to 10 of 333 entries

EXIF

File Name:	NetPeerDistCim.dll.mui
Directory:	%WINDIR%\WinSxS\amd64_microsoft-windows-p..st-common.resources_31bf3856ad364e35_10.0.15063.0_it-it_085048fdde97fcd0\
File Size:	66 kB
File Permissions:	rw-rw-rw-
File Type:	Win32 DLL
File Type Extension:	dll
MIME Type:	application/octet-stream
Machine Type:	Intel 386 or later, and compatibles
Time Stamp:	0000:00:00 00:00:00
PE Type:	PE32
Linker Version:	14.10
Code Size:	0
Initialized Data Size:	66560
Uninitialized Data Size:	0
Entry Point:	0x0000
OS Version:	10.0
Image Version:	10.0
Subsystem Version:	6.0
Subsystem:	Windows GUI
File Version Number:	10.0.15063.0
Product Version Number:	10.0.15063.0
File Flags Mask:	0x003f
File Flags:	(none)
File OS:	Windows NT 32-bit
Object File Type:	Dynamic link library
File Subtype:	0
Language Code:	Italian
Character Set:	Unicode
Company Name:	Microsoft Corporation
File Description:	BranchCache WMI Provider
File Version:	10.0.15063.0 (WinBuild.160101.0800)
Internal Name:	NetPeerDistCim.dll
Legal Copyright:	© Microsoft Corporation. All rights reserved.
Original File Name:	NetPeerDistCim.dll.mui
Product Name:	Microsoft® Windows® Operating System
Product Version:	10.0.15063.0

What is NetPeerDistCim.dll.mui?

NetPeerDistCim.dll.mui is Multilingual User Interface resource file that contain Italian language for file NetPeerDistCim.dll (BranchCache WMI Provider).

File version info

File Description:	BranchCache WMI Provider
File Version:	10.0.15063.0 (WinBuild.160101.0800)
Company Name:	Microsoft Corporation
Internal Name:	NetPeerDistCim.dll
Legal Copyright:	© Microsoft Corporation. All rights reserved.
Original Filename:	NetPeerDistCim.dll.mui
Product Name:	Microsoft® Windows® Operating System
Product Version:	10.0.15063.0
Translation:	0x410, 1200