nshwfp.dll.mui Windows Filtering Platform Netsh Helper 516d651594b9ac7d0952d0cc37f0116b

File name:	nshwfp.dll.mui
Size:	62976 byte
MD5:	516d651594b9ac7d0952d0cc37f0116b
SHA1:	e87b9b194eddaec61692f4650f70629c311a48ef
SHA256:	821f83ba91282290c590f06ed5ae89395c5b5de4116dd1f09afe840872cd65b3
Operating systems:	Windows 10
Extension:	MUI

If an error occurred or the following message in Danish language and you cannot find a solution, than check answer in English. Table below helps to know how correctly this phrase sounds in English.

id	Danish	English
999	Captures real-time diagnostic information.	Captures real-time diagnostic information.
1000	Shows WFP configuration and state.	Shows WFP configuration and state.
1001	Sets WFP diagnostic options.	Sets WFP diagnostic options.
1002	Controlling the WFP-IPsec event trace session.	Controlling the WFP-IPsec event trace session.
1990	Starts an interactive capture session.	Starts an interactive capture session.
1991	Usage: capture start [ [ cab = ] (ON | OFF) ] [ [ traceonly = ] (ON | OFF) ] [ [ keywords = ] (NONE | BCAST | MCAST | BCAST+MCAST) ] [ [ file = ] ] Parameters: Tag Value cab - Can be ON or OFF. The default is ON. ON compiles the files in a single .cab file. OFF leaves the output files uncompressed. This is useful if doing your own troubleshooting, rather than collecting data for others. traceonly - Can be ON or OFF. The default is OFF. ON collects only event tracing data, which reduces the output file size. keywords - Can be NONE, BCAST, MCAST, or BCAST+MCAST. The default is BCAST+MCAST. Sets the net event keywords used for the session. BCAST includes broadcast events and MCAST includes multicast events. To reduce the file size for long- running captures, set to NONE. file - Output file name. The default is 'wfpdiag.cab'. If the cab option is ON, the file name should not include the extension since the .cab is automatically added to the output file. Remarks: Starts an interactive capture session. To stop capture, run 'capture stop'.	Usage: capture start [ [ cab = ] (ON | OFF) ] [ [ traceonly = ] (ON | OFF) ] [ [ keywords = ] (NONE | BCAST | MCAST | BCAST+MCAST) ] [ [ file = ] ] Parameters: Tag Value cab - Can be ON or OFF. The default is ON. ON compiles the files in a single .cab file. OFF leaves the output files uncompressed. This is useful if doing your own troubleshooting, rather than collecting data for others. traceonly - Can be ON or OFF. The default is OFF. ON collects only event tracing data, which reduces the output file size. keywords - Can be NONE, BCAST, MCAST, or BCAST+MCAST. The default is BCAST+MCAST. Sets the net event keywords used for the session. BCAST includes broadcast events and MCAST includes multicast events. To reduce the file size for long- running captures, set to NONE. file - Output file name. The default is 'wfpdiag.cab'. If the cab option is ON, the file name should not include the extension since the .cab is automatically added to the output file. Remarks: Starts an interactive capture session. To stop capture, run 'capture stop'.
1992	Stops an interactive capture session.	Stops an interactive capture session.
1993	Usage: capture stop Remarks: Stops an interactive capture session. Takes effect if previous command executed was 'capture start'.	Usage: capture stop Remarks: Stops an interactive capture session. Takes effect if previous command executed was 'capture start'.
2000	Displays the current state of WFP and IPsec.	Displays the current state of WFP and IPsec.
2001	Usage: show state [ [ file = ] | - ] Parameters: Tag Value file - Output file name. The default is 'wfpstate.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. Remarks: Displays the current state of WFP and IPsec.	Usage: show state [ [ file = ] | - ] Parameters: Tag Value file - Output file name. The default is 'wfpstate.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. Remarks: Displays the current state of WFP and IPsec.
2002	Displays filters matching the specified traffic parameters.	Displays filters matching the specified traffic parameters.
2003	Usage: show filters [ [ file = ] | - ] [ [ protocol = ] ] [ [ localaddr = ] ] [ [ remoteaddr = ] ] [ [ localport = ] ] [ [ remoteport = ] ] [ [ appid = ] ] [ [ userid = ] ] [ [ dir = ] IN | OUT ] [ [ verbose = ] ON | OFF ] Parameters: Tag Value file - Output file name. The default is 'filters.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. protocol - The IP protocol. This must be an integer. localaddr - The IP addresses. 'localaddr' is the local IP address, remoteaddr and the 'remoteaddr' is the remote IP address. The addresses are either IPv4 or IPv6. If both local and remote addressses are specified, they both must belong to the same address family. localport - The ports. 'localport' is the local port remoteport and 'remoteport' is the remote port. They must be integers. appid - The application sending or receiving the traffic on the local host. This either an NT path such as '\device\harddiskvolume1\windows\system32\ftp.exe' or a DOS path such as 'c:\Windows\System32\ftp.exe' The supplied path must exist. userid - The user sending or receiving the traffic on the local host. The userid may be a SID (such as 'S-1-5-18') or a user name (such as 'nt authority\system'). dir - The direction of the connection. By default, filters for both inbound and outbound traffic are displayed. Use IN to display only filters for inbound traffic or OUT to display only filters for outbound traffic. verbose - Determines whether to display all filters. Can be ON or OFF. The default is OFF, which attempts to suppress matching filters that are unlikely to affect connectivity. ON does not suppress any filters. Remarks: Displays filters matching the specified traffic parameters.	Usage: show filters [ [ file = ] | - ] [ [ protocol = ] ] [ [ localaddr = ] ] [ [ remoteaddr = ] ] [ [ localport = ] ] [ [ remoteport = ] ] [ [ appid = ] ] [ [ userid = ] ] [ [ dir = ] IN | OUT ] [ [ verbose = ] ON | OFF ] Parameters: Tag Value file - Output file name. The default is 'filters.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. protocol - The IP protocol. This must be an integer. localaddr - The IP addresses. 'localaddr' is the local IP address, remoteaddr and the 'remoteaddr' is the remote IP address. The addresses are either IPv4 or IPv6. If both local and remote addressses are specified, they both must belong to the same address family. localport - The ports. 'localport' is the local port remoteport and 'remoteport' is the remote port. They must be integers. appid - The application sending or receiving the traffic on the local host. This either an NT path such as '\device\harddiskvolume1\windows\system32\ftp.exe' or a DOS path such as 'c:\Windows\System32\ftp.exe' The supplied path must exist. userid - The user sending or receiving the traffic on the local host. The userid may be a SID (such as 'S-1-5-18') or a user name (such as 'nt authority\system'). dir - The direction of the connection. By default, filters for both inbound and outbound traffic are displayed. Use IN to display only filters for inbound traffic or OUT to display only filters for outbound traffic. verbose - Determines whether to display all filters. Can be ON or OFF. The default is OFF, which attempts to suppress matching filters that are unlikely to affect connectivity. ON does not suppress any filters. Remarks: Displays filters matching the specified traffic parameters.
2004	Displays the boot-time policy and filters.	Displays the boot-time policy and filters.
2005	Usage: show boottimepolicy [ [ file = ] | - ] Parameters: Tag Value file - Output file name. The default is 'btpol.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. Remarks: Displays the boot-time policy and filters.	Usage: show boottimepolicy [ [ file = ] | - ] Parameters: Tag Value file - Output file name. The default is 'btpol.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. Remarks: Displays the boot-time policy and filters.
2008	Displays the global WFP options.	Displays the global WFP options.
2009	Usage: show options [optionsfor = ] NETEVENTS | KEYWORDS | TXNWATCHDOG Parameters: Tag Value optionsfor - Can be either NETEVENTS, KEYWORDS, or TXNWATCHDOG. NETEVENTS shows whether network events are buffered for diagnostics. KEYWORDS shows which network events are buffered for diagnostics. TXNWATCHDOG shows the timeout in milliseconds for the transaction watchdog event. Remarks: Displays the current value set for the specified option.	Usage: show options [optionsfor = ] NETEVENTS | KEYWORDS | TXNWATCHDOG Parameters: Tag Value optionsfor - Can be either NETEVENTS, KEYWORDS, or TXNWATCHDOG. NETEVENTS shows whether network events are buffered for diagnostics. KEYWORDS shows which network events are buffered for diagnostics. TXNWATCHDOG shows the timeout in milliseconds for the transaction watchdog event. Remarks: Displays the current value set for the specified option.
2010	Displays the application ID for the specified file.	Displays the application ID for the specified file.
2011	Usage: show appid [ file = ] Parameters: Tag Value file - Specifies the DOS path for the application. Remarks: Displays the application NT path for the specified file. The supplied path must exist.	Usage: show appid [ file = ] Parameters: Tag Value file - Specifies the DOS path for the application. Remarks: Displays the application NT path for the specified file. The supplied path must exist.
2014	Sets the global WFP options.	Sets the global WFP options.
2015	Usage: set options [ netevents = ON | OFF ] [ [ keywords = ] NONE | BCAST | MCAST| BCAST+MCAST ] [ [ txnwatchdog = ] ] Parameters: Tag Value netevents - Can be either ON or OFF. Sets the netevents option. keywords - Can be NONE, BCAST, MCAST, or BCAST+MCAST. Sets the keywords option. The default is NONE. txnwatchdog - Sets the timeout in milliseconds for the transaction watchdog event. This must be an integer. If no value is specified, the timeout is set to zero, and an event will be triggered for every transaction. Remarks: Sets the global WFP options. Only one option parameter can be set per execution.	Usage: set options [ netevents = ON | OFF ] [ [ keywords = ] NONE | BCAST | MCAST| BCAST+MCAST ] [ [ txnwatchdog = ] ] Parameters: Tag Value netevents - Can be either ON or OFF. Sets the netevents option. keywords - Can be NONE, BCAST, MCAST, or BCAST+MCAST. Sets the keywords option. The default is NONE. txnwatchdog - Sets the timeout in milliseconds for the transaction watchdog event. This must be an integer. If no value is specified, the timeout is set to zero, and an event will be triggered for every transaction. Remarks: Sets the global WFP options. Only one option parameter can be set per execution.
2018	Tells whether an interactive capture session is in progress.	Tells whether an interactive capture session is in progress.
2019	Usage: capture status Remarks: Tells whether an interactive capture session is in progress.	Usage: capture status Remarks: Tells whether an interactive capture session is in progress.
2055	Displays recent network events matching the traffic parameters.	Displays recent network events matching the traffic parameters.
2064	Usage: show netevents [ [ file = ] | - ] [ [ protocol = ] ] [ [ localaddr = ] ] [ [ remoteaddr = ] ] [ [ localport = ] ] [ [ remoteport = ] ] [ [ appid = ] ] [ [ userid = ] ] [ [ timewindow = ] ] Parameters: Tag Value file - Output file name. The default is 'netevents.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. protocol - The IP protocol. This must be an integer. localaddr - The IP addresses. 'localaddr' is the local IP address, remoteaddr and 'remoteaddr' is the remote IP address. The addresses are either IPv4 or IPv6. If both local and remote addresses are specified, they both must belong to the same address family. localport - The ports. 'localport' is the local port, and 'remoteport' is the remote port. remoteport They must be integers. appid - The application sending or receiving the traffic on the local host. This either an NT path such as '\device\harddiskvolume1\windows\system32\ftp.exe' or a DOS path such as 'c:\Windows\System32\ftp.exe' The supplied path must exist. userid - The user sending or receiving the traffic on the local host. The userid may be a SID (such as 'S-1-5-18') or a user name (such as 'nt authority\system'). timewindow - Limits the output to network events that occurred within a specified number of seconds. This must be an integer. Remarks: Displays recent network events matching the specified traffic parameters.	Usage: show netevents [ [ file = ] | - ] [ [ protocol = ] ] [ [ localaddr = ] ] [ [ remoteaddr = ] ] [ [ localport = ] ] [ [ remoteport = ] ] [ [ appid = ] ] [ [ userid = ] ] [ [ timewindow = ] ] Parameters: Tag Value file - Output file name. The default is 'netevents.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. protocol - The IP protocol. This must be an integer. localaddr - The IP addresses. 'localaddr' is the local IP address, remoteaddr and 'remoteaddr' is the remote IP address. The addresses are either IPv4 or IPv6. If both local and remote addresses are specified, they both must belong to the same address family. localport - The ports. 'localport' is the local port, and 'remoteport' is the remote port. remoteport They must be integers. appid - The application sending or receiving the traffic on the local host. This either an NT path such as '\device\harddiskvolume1\windows\system32\ftp.exe' or a DOS path such as 'c:\Windows\System32\ftp.exe' The supplied path must exist. userid - The user sending or receiving the traffic on the local host. The userid may be a SID (such as 'S-1-5-18') or a user name (such as 'nt authority\system'). timewindow - Limits the output to network events that occurred within a specified number of seconds. This must be an integer. Remarks: Displays recent network events matching the specified traffic parameters.
2065	Displays the specified security descriptor.	Displays the specified security descriptor.
2066	Usage: show security [ type = ] CALLOUT|ENGINE|FILTER|IKESADB|IPSECSADB|LAYER|NETEVENTS |PROVIDER|PROVIDERCONTEXT|SUBLAYER [ [ guid = ] Parameters: Tag Value type - Specifies the object type to be retrieved. Can be CALLOUT, ENGINE, FILTER, IKESADB, IPSECSADB, LAYER, NETEVENTS, PROVIDER, PROVIDERCONTEXT, or SUBLAYER. guid - For object types that support per-object security descriptors, this is the GUID of the object. If not specified, it defaults to IID_NULL, which retrieves the security descriptor of the type container. The following types support per-object security descriptors: callout filter layer provider providercontext sublayer Remarks: Displays the specified security descriptor.	Usage: show security [ type = ] CALLOUT|ENGINE|FILTER|IKESADB|IPSECSADB|LAYER|NETEVENTS |PROVIDER|PROVIDERCONTEXT|SUBLAYER [ [ guid = ] Parameters: Tag Value type - Specifies the object type to be retrieved. Can be CALLOUT, ENGINE, FILTER, IKESADB, IPSECSADB, LAYER, NETEVENTS, PROVIDER, PROVIDERCONTEXT, or SUBLAYER. guid - For object types that support per-object security descriptors, this is the GUID of the object. If not specified, it defaults to IID_NULL, which retrieves the security descriptor of the type container. The following types support per-object security descriptors: callout filter layer provider providercontext sublayer Remarks: Displays the specified security descriptor.
2075	Displays system ports used by the TCP/IP Stack and the RPC sub-system.	Displays system ports used by the TCP/IP Stack and the RPC sub-system.
2084	Usage: show sysports [ [ file = ] | - ] Parameters: Tag Value file - Output file name. The default is 'sysports.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. Remarks: Displays system ports used by the TCP/IP stack and the RPC sub-system.	Usage: show sysports [ [ file = ] | - ] Parameters: Tag Value file - Output file name. The default is 'sysports.xml'. If this parameter is set to the dash character, 'file = -', the output is written only to the console. Remarks: Displays system ports used by the TCP/IP stack and the RPC sub-system.
3000	Initializing data collection -- please wait.	Initializing data collection -- please wait.
3001	Only event tracing will be collected.	Only event tracing will be collected.
3002	Initialization complete. Reproduce the scenario, then run 'capture stop'.	Initialization complete. Reproduce the scenario, then run 'capture stop'.
3003	Data collection successful; output = %1!s!	Data collection successful; output = %1!s!
3004	Data collection successful; output = %t%1 %t%2	Data collection successful; output = %t%1 %t%2
3005	Finalizing data collection -- please wait.	Finalizing data collection -- please wait.
3006	Success.	Success.
3007	At least one netevent was not captured during the ETW session.	At least one netevent was not captured during the ETW session.
4001	Unable to connect to BFE; error = %1!s!	Unable to connect to BFE; error = %1!s!
4002	Unable to start an ETW trace session; error=%1!s!	Unable to start an ETW trace session; error=%1!s!
4003	Unable to open the XML file with Write access; error=%1!s!	Unable to open the XML file with Write access; error=%1!s!
4004	Unable to subscribe to change notifications; error = %1!s!	Unable to subscribe to change notifications; error = %1!s!
4005	Unable to write output to the XML file; error = %1!s!	Unable to write output to the XML file; error = %1!s!
4006	Unable to collect run-time events; error = %1!s!	Unable to collect run-time events; error = %1!s!
4007	Unable to format the trace file; error = %1!s!	Unable to format the trace file; error = %1!s!
4008	Unable to create the cabinet file.	Unable to create the cabinet file.
4009	Unable to load the XML document; error = %1!s!	Unable to load the XML document; error = %1!s!
4010	Import file parsing terminated at line %1!u!, column %2!u!	Import file parsing terminated at line %1!u!, column %2!u!
4011	Unexpected element '%1' at line %2!u!, column %3!u!	Unexpected element '%1' at line %2!u!, column %3!u!
4012	Unexpected text in element '%1' at line %2!u!, column %3!u!.	Unexpected text in element '%1' at line %2!u!, column %3!u!.
4013	Invalid text in element '%1' at line %2!u!, column %3!u!.	Invalid text in element '%1' at line %2!u!, column %3!u!.
4014	Unable to read the boot-time policy; error = %1!s!	Unable to read the boot-time policy; error = %1!s!
4015	Unable to enumerate the network events; error = %1!s!	Unable to enumerate the network events; error = %1!s!
4016	Unable to open the data collector set; error = %1!s!	Unable to open the data collector set; error = %1!s!
4017	Unable to add an object; error = %1!s!	Unable to add an object; error = %1!s!
4018	Unable to delete an object; error = %1!s!	Unable to delete an object; error = %1!s!
4019	The object is defined at line %1!u!, column %2!u!	The object is defined at line %1!u!, column %2!u!
4020	Capture is already in progress.	Capture is already in progress.
4021	No capture is in progress.	No capture is in progress.
4022	The IKEEXT log file does not exist. Ensure that IKEEXT tracing is enabled.	The IKEEXT log file does not exist. Ensure that IKEEXT tracing is enabled.
4028	Unable to query lost netevents from ETW.	Unable to query lost netevents from ETW.
5000	Deletes all IPsec DoS Protection configuration.	Deletes all IPsec DoS Protection configuration.
5001	reset Deletes all IPsec DoS Protection configuration. Parameters: none	reset Deletes all IPsec DoS Protection configuration. Parameters: none
5100	Adds IPsec DoS Protection configuration.	Adds IPsec DoS Protection configuration.
5101	Adds IPsec DoS Protection interface configuration.	Adds IPsec DoS Protection interface configuration.
5102	add interface [name=] [type=]public|internal Adds IPsec DoS Protection interface configuration. Parameters: Tag Value name - Friendly name of the interface. type - Interface type. public: Interface faces public network. internal: Interface faces internal network. Examples: add interface "Local Area Connection" public add interface name="Local Area Connection" type=public	add interface [name=] [type=]public|internal Adds IPsec DoS Protection interface configuration. Parameters: Tag Value name - Friendly name of the interface. type - Interface type. public: Interface faces public network. internal: Interface faces internal network. Examples: add interface "Local Area Connection" public add interface name="Local Area Connection" type=public
5110	Adds IPsec DoS Protection keying module configuration.	Adds IPsec DoS Protection keying module configuration.
5111	add allowedkeyingmodule [name=]ikev1|ikev2|authip [[internalprefix=][/]] Adds IPsec DoS Protection allowed keying module configuration. Parameters: Tag Value name - Name of an IPsec keying module to allow. ikev1: The IKEv1 keying module. ikev2: The IKEv2 keying module. authip: The AuthIP keying module. internalprefix - Internal host IPv6 address or subnet for which the keying module needs to be allowed (optional). If not specified, it will be allowed for all internal IPv6 addresses. Remarks: AuthIP is present in the list of allowed keying modules by default. Examples: add allowedkeyingmodule ikev1 add allowedkeyingmodule name=ikev1 add allowedkeyingmodule ikev1 3ffe:401d:1f00:baa::1	add allowedkeyingmodule [name=]ikev1|ikev2|authip [[internalprefix=][/]] Adds IPsec DoS Protection allowed keying module configuration. Parameters: Tag Value name - Name of an IPsec keying module to allow. ikev1: The IKEv1 keying module. ikev2: The IKEv2 keying module. authip: The AuthIP keying module. internalprefix - Internal host IPv6 address or subnet for which the keying module needs to be allowed (optional). If not specified, it will be allowed for all internal IPv6 addresses. Remarks: AuthIP is present in the list of allowed keying modules by default. Examples: add allowedkeyingmodule ikev1 add allowedkeyingmodule name=ikev1 add allowedkeyingmodule ikev1 3ffe:401d:1f00:baa::1
5120	Adds IPsec DoS Protection IPv6 filter configuration.	Adds IPsec DoS Protection IPv6 filter configuration.
5121	add filter [[publicprefix=][/]] [[internalprefix=][/]] [action=]exempt|block Adds IPsec DoS Protection IPv6 filter configuration. Parameters: Tag Value publicprefix - Public host IPv6 address or subnet (optional). If not specified, the filter will match all public IPv6 addresses. internalprefix - Internal host IPv6 address or subnet (optional). If not specified, the filter will match all internal IPv6 addresses. action - Action to take for any traffic that matches the filter. exempt: Don't require matching traffic to be IPsec protected. block: Block matching traffic. Examples: add filter publicprefix=3ffe:401d:1f00::/64 action=block	add filter [[publicprefix=][/]] [[internalprefix=][/]] [action=]exempt|block Adds IPsec DoS Protection IPv6 filter configuration. Parameters: Tag Value publicprefix - Public host IPv6 address or subnet (optional). If not specified, the filter will match all public IPv6 addresses. internalprefix - Internal host IPv6 address or subnet (optional). If not specified, the filter will match all internal IPv6 addresses. action - Action to take for any traffic that matches the filter. exempt: Don't require matching traffic to be IPsec protected. block: Block matching traffic. Examples: add filter publicprefix=3ffe:401d:1f00::/64 action=block
5200	Deletes IPsec DoS Protection configuration.	Deletes IPsec DoS Protection configuration.
5201	Deletes IPsec DoS Protection interface configuration.	Deletes IPsec DoS Protection interface configuration.
5202	delete interface [name=] Deletes IPsec DoS Protection interface configuration. Parameters: Tag Value name - Friendly name of the interface. Examples: delete interface "Local Area Connection" delete interface name="Local Area Connection"	delete interface [name=] Deletes IPsec DoS Protection interface configuration. Parameters: Tag Value name - Friendly name of the interface. Examples: delete interface "Local Area Connection" delete interface name="Local Area Connection"
5210	Deletes IPsec DoS Protection allowed keying module configuration.	Deletes IPsec DoS Protection allowed keying module configuration.
5211	delete allowedkeyingmodule [name=]ikev1|ikev2|authip [[internalprefix=][/]] Deletes IPsec DoS Protection allowed keying module configuration. Parameters: Tag Value name - Name of an IPsec keying module to disallow. ikev1: The IKEv1 keying module. ikev2: The IKEv2 keying module. authip: The AuthIP keying module. internalprefix - Internal host IPv6 address or subnet for which the keying module should be disallowed (optional). If not specified, it will be disallowed for all internal IPv6 addresses. Examples: delete allowedkeyingmodule ikev1 delete allowedkeyingmodule name=ikev1 delete allowedkeyingmodule ikev1 3ffe:401d:1f00:baa::1	delete allowedkeyingmodule [name=]ikev1|ikev2|authip [[internalprefix=][/]] Deletes IPsec DoS Protection allowed keying module configuration. Parameters: Tag Value name - Name of an IPsec keying module to disallow. ikev1: The IKEv1 keying module. ikev2: The IKEv2 keying module. authip: The AuthIP keying module. internalprefix - Internal host IPv6 address or subnet for which the keying module should be disallowed (optional). If not specified, it will be disallowed for all internal IPv6 addresses. Examples: delete allowedkeyingmodule ikev1 delete allowedkeyingmodule name=ikev1 delete allowedkeyingmodule ikev1 3ffe:401d:1f00:baa::1
5220	Deletes IPsec DoS Protection IPv6 filter configuration.	Deletes IPsec DoS Protection IPv6 filter configuration.
5221	delete filter [[publicprefix=][/]] [[internalprefix=][/]] Deletes IPsec DoS Protection IPv6 filter configuration. Parameters: Tag Value publicprefix - Public host IPv6 address or subnet (optional). This must be same as the publicprefix specified with the corresponding add command. internalprefix - Internal host IPv6 address or subnet (optional). This must be same as the internalprefix specified with the corresponding add command. Examples: delete filter 3ffe:401d:1f00::/64 delete filter publicprefix=3ffe:401d:1f00::/64	delete filter [[publicprefix=][/]] [[internalprefix=][/]] Deletes IPsec DoS Protection IPv6 filter configuration. Parameters: Tag Value publicprefix - Public host IPv6 address or subnet (optional). This must be same as the publicprefix specified with the corresponding add command. internalprefix - Internal host IPv6 address or subnet (optional). This must be same as the internalprefix specified with the corresponding add command. Examples: delete filter 3ffe:401d:1f00::/64 delete filter publicprefix=3ffe:401d:1f00::/64
5300	Sets IPsec DoS Protection information.	Sets IPsec DoS Protection information.
5301	Sets IPsec DoS Protection DSCP marking configuration.	Sets IPsec DoS Protection DSCP marking configuration.
5302	set dscp [type=]ipsecauthenticated|ipsecunauthenticated|icmpv6|filtered|default [value=]|disable Sets IPsec DoS Protection DSCP marking configuration. Parameters: Tag Value type - Type of inbound traffic for which the DSCP marking is being specified. ipsecauthenticated: Authenticated IPv6 IPsec traffic. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. icmpv6: ICMPv6 traffic. filtered: Filter exempted IPv6 traffic. default: Default-block exempted traffic. value - DCSP value to mark in the top 6 bits of the traffic class or TOS field in the IP header of corresponding traffic. : Must be	set dscp [type=]ipsecauthenticated|ipsecunauthenticated|icmpv6|filtered|default [value=]|disable Sets IPsec DoS Protection DSCP marking configuration. Parameters: Tag Value type - Type of inbound traffic for which the DSCP marking is being specified. ipsecauthenticated: Authenticated IPv6 IPsec traffic. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. icmpv6: ICMPv6 traffic. filtered: Filter exempted IPv6 traffic. default: Default-block exempted traffic. value - DCSP value to mark in the top 6 bits of the traffic class or TOS field in the IP header of corresponding traffic. : Must be
5310	Sets IPsec DoS Protection miscellaneous configuration.	Sets IPsec DoS Protection miscellaneous configuration.
5311	set miscellaneous [[stateidletimeout=]] [[peripratelimitidletimeout=]] [[maxentries=]] [[maxperipratelimitqueues=]] [[defaultblock=]enable|disable] Sets IPsec DoS Protection miscellaneous configuration. Parameters: Tag Value stateidletimeout - State inactivity timeout in seconds (optional). : Must be 0 and : Must be 0 and : Must be 0 and : Must be 0 and	set miscellaneous [[stateidletimeout=]] [[peripratelimitidletimeout=]] [[maxentries=]] [[maxperipratelimitqueues=]] [[defaultblock=]enable|disable] Sets IPsec DoS Protection miscellaneous configuration. Parameters: Tag Value stateidletimeout - State inactivity timeout in seconds (optional). : Must be 0 and : Must be 0 and : Must be 0 and : Must be 0 and
5320	Sets IPsec DoS Protection rate limit configuration.	Sets IPsec DoS Protection rate limit configuration.
5321	set ratelimit [type=]ipsecauthenticated|ipsecunauthenticated|ipsecunauthenticatedperip| icmpv6|filtered|default [value=]|disable Sets IPsec DoS Protection rate limit configuration. Parameters: Tag Value type - Type of inbound traffic for which the rate limit is being specified. ipsecauthenticated: Authenticated IPv6 IPsec traffic. Rate limit disabled by default. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. Default rate limit is 102400 bytes/sec. ipsecunauthenticatedperip: Per internal IP address rate limit for unauthenticated IPv6 IPsec traffic. Default rate limit is 10240 bytes/sec. icmpv6: ICMPv6 traffic. Default rate limit for this traffic type is 10240 bytes/sec. filtered: Filter exempted IPv6 traffic. Default rate limit is 102400 bytes/sec. default: Default-block exempted traffic. Default rate limit is 102400 bytes/sec. value - Value of the rate limit in bytes/sec. : Must be 0 and	set ratelimit [type=]ipsecauthenticated|ipsecunauthenticated|ipsecunauthenticatedperip| icmpv6|filtered|default [value=]|disable Sets IPsec DoS Protection rate limit configuration. Parameters: Tag Value type - Type of inbound traffic for which the rate limit is being specified. ipsecauthenticated: Authenticated IPv6 IPsec traffic. Rate limit disabled by default. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. Default rate limit is 102400 bytes/sec. ipsecunauthenticatedperip: Per internal IP address rate limit for unauthenticated IPv6 IPsec traffic. Default rate limit is 10240 bytes/sec. icmpv6: ICMPv6 traffic. Default rate limit for this traffic type is 10240 bytes/sec. filtered: Filter exempted IPv6 traffic. Default rate limit is 102400 bytes/sec. default: Default-block exempted traffic. Default rate limit is 102400 bytes/sec. value - Value of the rate limit in bytes/sec. : Must be 0 and
5400	Displays IPsec DoS Protection information.	Displays IPsec DoS Protection information.
5401	Displays IPsec DoS Protection interface configuration.	Displays IPsec DoS Protection interface configuration.
5402	show interface [[type=]public|internal] Displays IPsec DoS Protection interface configuration. Parameters: Tag Value type - Interface type (optional). public: Show interfaces facing public network. internal: Show interfaces facing internal network. Examples: show interface show interface public show interface type=public	show interface [[type=]public|internal] Displays IPsec DoS Protection interface configuration. Parameters: Tag Value type - Interface type (optional). public: Show interfaces facing public network. internal: Show interfaces facing internal network. Examples: show interface show interface public show interface type=public
5403	Public interfaces:	Public interfaces:
5404	Internal interfaces:	Internal interfaces:
5410	Displays IPsec DoS Protection keying module configuration.	Displays IPsec DoS Protection keying module configuration.
5411	show allowedkeyingmodule Displays IPsec DoS Protection allowed keying module configuration. Parameters: none	show allowedkeyingmodule Displays IPsec DoS Protection allowed keying module configuration. Parameters: none
5412	Allowed keying modules (internalprefix - keying module list):	Allowed keying modules (internalprefix - keying module list):
5420	Displays IPsec DoS Protection DSCP marking configuration.	Displays IPsec DoS Protection DSCP marking configuration.
5421	show dscp [[type=]ipsecauthenticated|ipsecunauthenticated|icmpv6|filtered|default] Displays IPsec DoS Protection DSCP marking configuration. Parameters: Tag Value type - Type of inbound traffic for which the DSCP marking should be displayed (optional). If not specified, all types will be displayed. ipsecauthenticated: Authenticated IPv6 IPsec traffic. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. icmpv6: ICMPv6 traffic. filtered: Filter exempted IPv6 traffic. default: Default-block exempted traffic. Examples: show dscp show dscp ipsecunauthenticated show dscp type=ipsecunauthenticated	show dscp [[type=]ipsecauthenticated|ipsecunauthenticated|icmpv6|filtered|default] Displays IPsec DoS Protection DSCP marking configuration. Parameters: Tag Value type - Type of inbound traffic for which the DSCP marking should be displayed (optional). If not specified, all types will be displayed. ipsecauthenticated: Authenticated IPv6 IPsec traffic. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. icmpv6: ICMPv6 traffic. filtered: Filter exempted IPv6 traffic. default: Default-block exempted traffic. Examples: show dscp show dscp ipsecunauthenticated show dscp type=ipsecunauthenticated
5422	Authenticated IPv6 IPsec dscp: %1!s!	Authenticated IPv6 IPsec dscp: %1!s!
5423	Unauthenticated IPv6 IPsec dscp: %1!s!	Unauthenticated IPv6 IPsec dscp: %1!s!
5424	ICMPv6 dscp: %1!s!	ICMPv6 dscp: %1!s!
5425	IPv6 filter exempted dscp: %1!s!	IPv6 filter exempted dscp: %1!s!
5426	Default-block exempted dscp: %1!s!	Default-block exempted dscp: %1!s!
5430	Displays IPsec DoS Protection miscellaneous configuration.	Displays IPsec DoS Protection miscellaneous configuration.
5431	show miscellaneous Displays IPsec DoS Protection miscellaneous configuration. Parameters: none	show miscellaneous Displays IPsec DoS Protection miscellaneous configuration. Parameters: none
5432	State idle timeout (seconds): %1!u!	State idle timeout (seconds): %1!u!
5433	Per IP address rate limit queue idle timeout (seconds): %1!u!	Per IP address rate limit queue idle timeout (seconds): %1!u!
5434	Maximum number of state entries: %1!u!	Maximum number of state entries: %1!u!
5435	Maximum number of per IP address rate limit queues: %1!u!	Maximum number of per IP address rate limit queues: %1!u!
5436	Default block: %1!s!	Default block: %1!s!
5440	Displays IPsec DoS Protection rate limit configuration.	Displays IPsec DoS Protection rate limit configuration.
5441	show ratelimit [[type=]ipsecauthenticated|ipsecunauthenticated|ipsecunauthenticatedperip| icmpv6|filtered|default] Displays IPsec DoS Protection rate limit configuration. Parameters: Tag Value type - Type of traffic for which the rate limit should be displayed (optional). If not specified, all types will be displayed. ipsecauthenticated: Authenticated IPv6 IPsec traffic. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. ipsecunauthenticatedperip: Per internal IP address rate limit for unauthenticated IPv6 IPsec traffic. icmpv6: ICMPv6 traffic. filtered: Filter exempted IPv6 traffic. default: Default-block exempted traffic. Examples: show ratelimit show ratelimit ipsecunauthenticated show ratelimit type=ipsecunauthenticated	show ratelimit [[type=]ipsecauthenticated|ipsecunauthenticated|ipsecunauthenticatedperip| icmpv6|filtered|default] Displays IPsec DoS Protection rate limit configuration. Parameters: Tag Value type - Type of traffic for which the rate limit should be displayed (optional). If not specified, all types will be displayed. ipsecauthenticated: Authenticated IPv6 IPsec traffic. ipsecunauthenticated: Unauthenticated IPv6 IPsec traffic. ipsecunauthenticatedperip: Per internal IP address rate limit for unauthenticated IPv6 IPsec traffic. icmpv6: ICMPv6 traffic. filtered: Filter exempted IPv6 traffic. default: Default-block exempted traffic. Examples: show ratelimit show ratelimit ipsecunauthenticated show ratelimit type=ipsecunauthenticated
5442	Authenticated IPv6 IPsec rate limit (bytes/sec): %1!s!	Authenticated IPv6 IPsec rate limit (bytes/sec): %1!s!
5443	Unauthenticated IPv6 IPsec rate limit (bytes/sec): %1!s!	Unauthenticated IPv6 IPsec rate limit (bytes/sec): %1!s!
5444	Unauthenticated IPv6 IPsec per IP address rate limit (bytes/sec): %1!s!	Unauthenticated IPv6 IPsec per IP address rate limit (bytes/sec): %1!s!
5445	ICMPv6 rate limit (bytes/sec): %1!s!	ICMPv6 rate limit (bytes/sec): %1!s!
5446	IPv6 filter exempted rate limit (bytes/sec): %1!s!	IPv6 filter exempted rate limit (bytes/sec): %1!s!
5447	Default-block exempted rate limit (bytes/sec): %1!s!	Default-block exempted rate limit (bytes/sec): %1!s!
5450	Displays IPsec DoS Protection state entries.	Displays IPsec DoS Protection state entries.
5451	show state [[publicprefix=][/]] [[internalprefix=][/]] Displays all state entries inside IPsec DoS Protection that match specified criteria. Parameters: Tag Value publicprefix - Public host IPv6 address or subnet (optional). If not specified, all public IPv6 addresses will be matched. internalprefix - Internal host IPv6 address or subnet (optional). If not specified, all internal IPv6 addresses will be matched. Examples: Show state Show state publicprefix=3ffe::/16 Show state internalprefix=3ffe:401d:1f00:baa::1	show state [[publicprefix=][/]] [[internalprefix=][/]] Displays all state entries inside IPsec DoS Protection that match specified criteria. Parameters: Tag Value publicprefix - Public host IPv6 address or subnet (optional). If not specified, all public IPv6 addresses will be matched. internalprefix - Internal host IPv6 address or subnet (optional). If not specified, all internal IPv6 addresses will be matched. Examples: Show state Show state publicprefix=3ffe::/16 Show state internalprefix=3ffe:401d:1f00:baa::1
5452	IPsec DoS Protection state entries (There are %1!u! entries) ----------------------------------------------------------------------------	IPsec DoS Protection state entries (There are %1!u! entries) ----------------------------------------------------------------------------
5453	Public host IPv6 address: %1!s!	Public host IPv6 address: %1!s!
5454	Internal host IPv6 address: %1!s!	Internal host IPv6 address: %1!s!
5455	Total inbound IPv6 IPsec packets allowed on this state: %1!I64u!	Total inbound IPv6 IPsec packets allowed on this state: %1!I64u!
5456	Total outbound IPv6 IPsec packets allowed on this state: %1!I64u!	Total outbound IPv6 IPsec packets allowed on this state: %1!I64u!
5457	Time elapsed since state creation (seconds): %1!u!	Time elapsed since state creation (seconds): %1!u!
5460	Displays IPsec DoS Protection statistics.	Displays IPsec DoS Protection statistics.
5461	show statistics Displays IPsec DoS Protection statistics. Parameters: none	show statistics Displays IPsec DoS Protection statistics. Parameters: none
5462	Total state entries created: %1!I64u!	Total state entries created: %1!I64u!
5463	Current state entries: %1!I64u!	Current state entries: %1!I64u!
5464	Current per IP address rate limit queues: %1!I64u!	Current per IP address rate limit queues: %1!I64u!
5465	Total inbound allowed unauthenticated IPv6 IPsec packets: %1!I64u!	Total inbound allowed unauthenticated IPv6 IPsec packets: %1!I64u!
5466	Total inbound unauthenticated IPv6 IPsec packets discarded due to rate limit: %1!I64u!	Total inbound unauthenticated IPv6 IPsec packets discarded due to rate limit: %1!I64u!
5467	Total inbound unauthenticated IPv6 IPsec packets discarded due to per IP address rate limit: %1!I64u!	Total inbound unauthenticated IPv6 IPsec packets discarded due to per IP address rate limit: %1!I64u!
5468	Total inbound unauthenticated IPv6 IPsec packets discarded due to other reasons: %1!I64u!	Total inbound unauthenticated IPv6 IPsec packets discarded due to other reasons: %1!I64u!
5469	Total inbound allowed authenticated IPv6 IPsec packets: %1!I64u!	Total inbound allowed authenticated IPv6 IPsec packets: %1!I64u!
5470	Total inbound authenticated IPv6 IPsec packets discarded due to rate limit: %1!I64u!	Total inbound authenticated IPv6 IPsec packets discarded due to rate limit: %1!I64u!
5471	Total inbound authenticated IPv6 IPsec packets discarded due to other reasons: %1!I64u!	Total inbound authenticated IPv6 IPsec packets discarded due to other reasons: %1!I64u!
5472	Total inbound allowed ICMPv6 packets: %1!I64u!	Total inbound allowed ICMPv6 packets: %1!I64u!
5473	Total inbound ICMPv6 packets discarded due to rate limit: %1!I64u!	Total inbound ICMPv6 packets discarded due to rate limit: %1!I64u!
5474	Total inbound allowed filter exempted IPv6 packets: %1!I64u!	Total inbound allowed filter exempted IPv6 packets: %1!I64u!
5475	Total inbound filter exempted IPv6 packets discarded due to rate limit: %1!I64u!	Total inbound filter exempted IPv6 packets discarded due to rate limit: %1!I64u!
5476	Total inbound filter blocked IPv6 packets: %1!I64u!	Total inbound filter blocked IPv6 packets: %1!I64u!
5477	Total inbound allowed default-block exempted packets: %1!I64u!	Total inbound allowed default-block exempted packets: %1!I64u!
5478	Total inbound default-block exempted packets discarded due to rate limit: %1!I64u!	Total inbound default-block exempted packets discarded due to rate limit: %1!I64u!
5479	Total inbound default-block discarded packets: %1!I64u!	Total inbound default-block discarded packets: %1!I64u!
5480	Displays IPsec DoS Protection IPv6 filter configuration.	Displays IPsec DoS Protection IPv6 filter configuration.
5481	show filter Displays IPsec DoS Protection IPv6 filter configuration. Parameters: none	show filter Displays IPsec DoS Protection IPv6 filter configuration. Parameters: none
5482	IPv6 filters (publicprefix internalprefix - action):	IPv6 filters (publicprefix internalprefix - action):
5490	Displays IPsec DoS Protection configuration, statistics and state entries.	Displays IPsec DoS Protection configuration, statistics and state entries.
5491	show all Displays IPsec DoS Protection configuration, statistics and state entries. Parameters: none	show all Displays IPsec DoS Protection configuration, statistics and state entries. Parameters: none
5492	IPsec DoS Protection configuration parameters ----------------------------------------------------------------------------	IPsec DoS Protection configuration parameters ----------------------------------------------------------------------------
5493	IPsec DoS Protection statistics ----------------------------------------------------------------------------	IPsec DoS Protection statistics ----------------------------------------------------------------------------
5500

File Name:	nshwfp.dll.mui
Directory:	%WINDIR%\WinSxS\amd64_microsoft-windows-n..-security.resources_31bf3856ad364e35_10.0.15063.0_da-dk_b92d37e58cade055\
File Size:	62 kB
File Permissions:	rw-rw-rw-
File Type:	Win32 DLL
File Type Extension:	dll
MIME Type:	application/octet-stream
Machine Type:	Intel 386 or later, and compatibles
Time Stamp:	0000:00:00 00:00:00
PE Type:	PE32
Linker Version:	14.10
Code Size:	0
Initialized Data Size:	62464
Uninitialized Data Size:	0
Entry Point:	0x0000
OS Version:	10.0
Image Version:	10.0
Subsystem Version:	6.0
Subsystem:	Windows GUI
File Version Number:	10.0.15063.0
Product Version Number:	10.0.15063.0
File Flags Mask:	0x003f
File Flags:	(none)
File OS:	Windows NT 32-bit
Object File Type:	Dynamic link library
File Subtype:	0
Language Code:	Danish
Character Set:	Unicode
Company Name:	Microsoft Corporation
File Description:	Windows Filtering Platform Netsh Helper
File Version:	10.0.15063.0 (WinBuild.160101.0800)
Internal Name:	nshwfp.dll
Legal Copyright:	© Microsoft Corporation. All rights reserved.
Original File Name:	nshwfp.dll.mui
Product Name:	Microsoft® Windows® Operating System
Product Version:	10.0.15063.0
Directory:	%WINDIR%\WinSxS\wow64_microsoft-windows-n..-security.resources_31bf3856ad364e35_10.0.15063.0_da-dk_c381e237c10ea250\

nshwfp.dll.mui is Multilingual User Interface resource file that contain Danish language for file nshwfp.dll (Windows Filtering Platform Netsh Helper).

File Description:	Windows Filtering Platform Netsh Helper
File Version:	10.0.15063.0 (WinBuild.160101.0800)
Company Name:	Microsoft Corporation
Internal Name:	nshwfp.dll
Legal Copyright:	© Microsoft Corporation. All rights reserved.
Original Filename:	nshwfp.dll.mui
Product Name:	Microsoft® Windows® Operating System
Product Version:	10.0.15063.0
Translation:	0x406, 1200