| 1000 | 虚拟磁盘管理器 |
Virtual Disk Manager |
| 1001 | 磁盘管理 |
Disk Management |
| 0x0100040D | 重新启动计算机之前，驱动器号重新分配将不会生效。 |
The drive letter reassignment will not occur until the computer is restarted. |
| 0x410000DB | 由于磁盘含有外部分区，不允许该操作。 |
The operation is not allowed because the disk contains foreign partitions. |
| 0x410000DC | 内部错误 - 一个主磁盘组已存在 |
INTERNAL Error - A primary disk group already exists |
| 0x410000DD | Windows 专业版中不允许要求的操作。 |
The requested operation is not allowed in Windows Professional. |
| 0x410000DE | 内部错误 - 由于卷仍在初始化，不允许该操作 |
INTERNAL Error - The operation is not allowed because the volume is still initializing |
| 0x410000DF | 要求的磁盘已被该卷使用。 |
The requested disk is already in use by this volume. |
| 0x410000E0 | 内部错误 - 列的子磁盘没有断开连接 |
INTERNAL Error - A subdisk of the column is not detached |
| 0x410000E1 | 由于所有镜像或 RAID-5 成员目前都未禁用，不需要进行该操作。 |
The operation is not needed because no mirrors or RAID-5 members are currently disabled. |
| 0x410000E2 | 由于所有 RAID-5 成员目前都未禁用，不需要进行该操作。 |
The operation is not needed because no RAID-5 members are currently disabled. |
| 0x410000E3 | 逻辑磁盘管理器无法打开卷。 |
Logical Disk Manager could not open a volume. |
| 0x410000E5 | 逻辑磁盘管理器无法卸载卷。 |
Logical Disk Manager could not dismount a volume. |
| 0x410000E6 | 逻辑磁盘管理器无法决定分区类型。 |
Logical Disk Manager could not determine a partition type. |
| 0x410000E7 | 逻辑磁盘管理器无法关联驱动器号。 |
Logical Disk Manager could not associate a drive letter. |
| 0x410000E8 | 逻辑磁盘管理器无法检索有关旧版基本卷的信息。 |
Logical Disk Manager could not retrieve information about a legacy basic volume. |
| 0x410000E9 | 磁盘上没有旧版基本卷。 |
There is no legacy basic volume on the disk. |
| 0x410000EA | 磁盘上配置数据库的空间不足。 |
There is not enough space for the configuration database on the disk. |
| 0x410000EB | 旧版的基本卷不健全。 |
A legacy basic volume is unhealthy. |
| 0x410000ED | 转换需要重新启动计算机。 |
The conversion will require you to restart your computer. |
| 0x410000EE | 活动分区不是当前活动分区。 |
An active partition is not the current active partition. |
| 0x410000F0 | 转换后不能分区磁盘。 |
The disk cannot be partitioned after it has been converted. |
| 0x410000F1 | 磁盘转换暂停。 |
A disk conversion is already pending. |
| 0x410000F2 | 逻辑磁盘管理器无法转换所选的磁盘。 |
Logical Disk Manager could not convert the selected disks. |
| 0x410000F3 | 磁盘配置在另一个系统上经过更改。 |
The disk configuration was changed on another system. |
| 0x410000F4 | 逻辑磁盘管理器检测到上一次转换失败。 |
Logical Disk Manager detected a previous conversion attempt failure. |
| 0x410000F5 | 所选磁盘已经过转换。 |
The selected disk has already been converted. |
| 0x410000F6 | 转换前记录的旧版基本卷配置跟当前的配置不相配。 |
The recorded configuration of legacy basic volumes before the conversion does not match the current configuration. |
| 0x410000F7 | 在基本分区之间检测到一个外部分区。 |
A foreign partition has been detected between basic partitions. |
| 0x8100040A | 无法打开调试日志文件“%1”。调试跟踪不可用。 |
Debug log file \"%1\" could not be opened. Debug tracing is not available. |
| 0x8100040B | 请求已超时，不能完成。 |
The request timed out and could not be completed. |
| 0x8100040C | 不支持请求的操作。 |
The requested operation is not supported. |
| 0x8100040E | 格式化成功但文件和文件夹压缩没有被启用。 |
The format succeeded, but file and folder compression are not enabled. |
| 0x8100041F | 卷已被修理，但基本分区没有标成活动的，原因是磁盘上的另一个分区已被标为活动的。要将其基本分区标为活动的，你可以将卷标为活动的。 |
The volume was repaired but the underlying partition was not marked active because another partition on the disk is already marked active. You can mark the volume active to mark its underlying partitions active. |
| 0x81000420 | 卷已被修复，但基本分区没有标成活动的，原因是它是逻辑驱动器。 |
The volume was repaired but the underlying partition was not marked active because it is a logical drive. |
| 0xC1000000 | LDM_E_NOERROR |
LDM_E_NOERROR |
| 0xC1000001 | 出现了意外错误。有关错误的详细信息，请查阅系统事件日志。关闭磁盘管理控制台，然后重新启动磁盘管理或计算机。 |
An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer. |
| 0xC1000004 | 内部错误 - 提交状态丢失 |
INTERNAL Error - The commit status has been lost |
| 0xC100000A | 内部错误 - 请求包含无法的消息格式 |
INTERNAL Error - The request contains a message format that is not valid |
| 0xC100000C | 内存不足，无法完成操作。请保存你的工作，关闭其他程序，然后重试。 |
There is not enough memory available to complete the operation. Save your work, close other programs, and then try again. |
| 0xC1000014 | 内部错误 - 操作要求处理 |
INTERNAL Error - The operation requires a transaction |
| 0xC1000016 | 内部错误 - 终止操作，必须重新开始处理 |
INTERNAL Error - The commit has been aborted, transaction must be restarted |
| 0xC1000017 | 由于磁盘 I/O 错误过多，系统中的动态磁盘无法配置。请确认存储设备的状态，然后重新启动计算机。 |
The dynamic disks present in the system cannot be configured due to excessive disk I/O errors. Verify the status of your storage devices then restart the computer. |
| 0xC1000018 | 内部错误 - 配置程序中出现意外错误 |
INTERNAL Error - An unexpected error occurred in the configuration program |
| 0xC1000019 | 内部错误 - 在配置更新中出现意外内核错误 |
INTERNAL Error - An unexpected error occurred in the kernel during a configuration update |
| 0xC100001B | 内部错误 - 逻辑磁盘管理器无法启动记录线程 |
INTERNAL Error - Logical Disk Manager cannot start the logging thread |
| 0xC100001C | 磁盘组已被禁用。 |
The disk group has been disabled. |
| 0xC1000029 | 磁盘组配置副本中至少有一个错误。 |
One or more errors exist in the disk group configuration copies. |
| 0xC100002D | 内部错误 -目前已禁用配置程序 |
INTERNAL Error - The configuration program is currently disabled |
| 0xC1000030 | 内部错误 - 在磁盘组和磁盘列表之间不能聚合 |
INTERNAL Error - No convergence between disk group and disk list |
| 0xC1000032 | 找不到要求的逻辑磁盘管理器注册表项。 |
The expected Logical Disk Manager registry keys were not found. |
| 0xC1000033 | 读取或设置逻辑磁盘管理注册表项时遇到一个系统错误。 |
A system error was encountered while reading or setting a Logical Disk Manager registry key. |
| 0xC1000034 | 内部错误 - 在逻辑磁盘管理器注册表项中发现了字符串格式错误 |
INTERNAL Error - String format errors were found in Logical Disk Manager registry keys |
| 0xC100003C | 内部错误 - 事务已在处理中 |
INTERNAL Error - A transaction is already in progress |
| 0xC100003D | 内部错误 - 已禁用或没有实现这个功能 |
INTERNAL Error - This feature is disabled or is not implemented |
| 0xC100003E | 内部错误 - 不支持请求的操作 |
INTERNAL Error - The requested operation is not supported |
| 0xC100003F | 内部错误 - 无法获得请求的锁定 |
INTERNAL Error - The requested lock could not be obtained |
| 0xC1000040 | 内部错误 - 请求的锁定不保留在事务中 |
INTERNAL Error - The required lock is not held in the transaction |
| 0xC1000041 | 内部错误 - 请求的数据锁定不保留在事务中 |
INTERNAL Error - The required data lock is not held in the transaction |
| 0xC1000042 | 内部错误 - 具有指定名的对象已在磁盘组 |
INTERNAL Error - An object with the specified name already exists in the disk group |
| 0xC1000043 | 指定的对象已经不在磁盘组中了 |
The specified object no longer exists in the disk group. |
| 0xC1000044 | 内部错误 - 磁盘组配置已经更改 |
INTERNAL Error - The disk group configuration has changed |
| 0xC1000046 | 该指定的对象处于活动使用中，不允许操作。 |
The specified object is in active use, operation not allowed. |
| 0xC1000047 | 请求的操作无效。 |
The requested operation is not valid. |
| 0xC1000049 | 内部错误 - 将负数长度、宽度或偏移量作为请求的参数接受 |
INTERNAL Error - Negative length, width, or offset received as parameter of the request |
| 0xC100004B | 内部错误 - 记录名称无效 |
INTERNAL Error - The record name is not valid |
| 0xC100004C | 操作需要一个已经禁用的卷。 |
The operation requires a disabled volume. |
| 0xC100004D | 由于镜像卷目前找不到或正在重新生成，不能删除这个镜像。镜像状态处于良好状态时再进行这个操作。 |
This mirror cannot be removed because the mirrored volume is currently missing or regenerating. Retry this operation when the mirror state is Healthy. |
| 0xC100004E | 内部错误 - 操作要求一个相关的记录 |
INTERNAL Error - The operation requires an associated record |
| 0xC100004F | 请求的对象处于使用中，不允许操作。 |
The operation is not allowed because the requested object is in active use. |
| 0xC1000052 | 内部错误 - 指定的带区丛没有压缩 |
INTERNAL Error - The specified striped plex is not compact |
| 0xC1000053 | 内部错误 - 带区丛的分磁盘有不同的大小 |
INTERNAL Error - The subdisks of the striped plex have different sizes |
| 0xC1000054 | 内部错误 - 没有与带区丛相关的子磁盘 |
INTERNAL Error - The striped plex has no associated subdisks |
| 0xC1000055 | 内部错误 - 记录不能有更多的关联 |
INTERNAL Error - The record cannot have more associations |
| 0xC1000056 | 内部错误 - 记录类型无效 |
INTERNAL Error - The record type is not valid |
| 0xC1000057 | 内部错误 - 指定的记录不是一个分磁盘 |
INTERNAL Error - The specified record is not a subdisk |
| 0xC1000058 | 内部错误 - 指定的记录不是一个丛 |
INTERNAL Error - The specified record is not a plex |
| 0xC1000059 | 内部错误 - 指定的记录不是一个卷 |
INTERNAL Error - The specified record is not a volume |
| 0xC100005A | 内部错误 - 指定的记录不是一个磁盘介质 |
INTERNAL Error - The specified record is not a disk media |
| 0xC100005B | 内部错误 - 指定的记录不是一个磁盘组 |
INTERNAL Error - The specified record is not a disk group |
| 0xC100005C | 内部错误 - 指定的记录不是磁盘访问 |
INTERNAL Error - The specified record is not a disk access |
| 0xC100005D | 内部错误 - 不允许在一个磁盘组上操作 |
INTERNAL Error - The operation is not allowed on a disk group |
| 0xC100005E | 已达到卷极限，无法创建额外动态卷。 |
The volume limit has been reached, no additional dynamic volumes can be created. |
| 0xC100005F | 内部错误 - 丛太多 |
INTERNAL Error - Too many plexes exist |
| 0xC1000060 | 内部错误 - 分磁盘与另一个分磁盘重叠 |
INTERNAL Error - The subdisk overlaps with another subdisk |
| 0xC1000061 | 内部错误 - 带区丛分磁盘的长度比带区宽度短 |
INTERNAL Error - A striped plex subdisk has the length shorter than the stripe width |
| 0xC1000062 | 内部错误 - 带区丛分磁盘的长度不是带区宽度的倍数 |
INTERNAL Error - A striped plex subdisk has the length not multiple of the stripe width |
| 0xC1000063 | 内部错误 - 指定的域无效 |
INTERNAL Error - The specified field is not valid |
| 0xC1000064 | 内部错误 - 丛带区宽度无效 |
INTERNAL Error - The plex stripe width is not valid |
| 0xC1000065 | 内部错误 - 操作溢出最大偏移量 |
INTERNAL Error - The operation overflows the maximum offsets |
| 0xC1000066 | 内部错误 - 对卷来讲，记录分磁盘太小 |
INTERNAL Error - The log subdisk is too small for the volume |
| 0xC1000069 | 内部错误 - 丛已有一个记录分磁盘 |
INTERNAL Error - The plex already has a log subdisk |
| 0xC100006B | 指定的磁盘组已不再存在 |
The specified disk group no longer exists. |
| 0xC100006C | 内部错误 - 请求超过磁盘组界限 |
INTERNAL Error - The request crosses a disk group boundary |
| 0xC100006D | 内部错误 - 仅在根目录磁盘组上允许请求 |
INTERNAL Error - The request is allowed only in the root disk group |
| 0xC100006E | 内部错误 - 分磁盘不在公用区域范围内 |
INTERNAL Error - The subdisk is not within the public region boundaries |
| 0xC100006F | 指定的磁盘没有就绪或无法使用。 |
The specified disk is not ready or not usable. |
| 0xC1000070 | 内部错误 - 指定的卷不可用 |
INTERNAL Error - The specified volume is not usable |
| 0xC1000071 | 指定的设备路径无法使用。 |
The specified device path cannot be accessed. |
| 0xC1000073 | 内部错误 - 没有启用根目录磁盘组 |
INTERNAL Error - The root disk group is not enabled |
| 0xC1000074 | 内部错误 - 无法辨认磁盘访问类型 |
INTERNAL Error - The disk access type is not recognized |
| 0xC1000075 | 指定的磁盘处于脱机状态。 |
The specified disk is offline. |
| 0xC1000076 | 内部错误 - 记录存储太大 |
INTERNAL Error - The record store size is too large |
| 0xC1000077 | 内部错误 - 指定的分磁盘没有启用 |
INTERNAL Error - The specified subdisk is not enabled |
| 0xC1000078 | 内部错误 - 指定的丛含有已禁用的分磁盘 |
INTERNAL Error - The specified plex contains disabled subdisks |
| 0xC1000079 | 由于指定的磁盘不是空的，不允许操作。 |
The operation is not allowed because the specified disk is not empty. |
| 0xC100007A | 内部错误 - 具有指定名的磁盘组已存在 |
INTERNAL Error - A disk group with the specified name already exists |
| 0xC100007B | 内部错误 - 不允许在创建的磁盘组上操作 |
INTERNAL Error - The operation is not allowed on a created disk group |
| 0xC100007C | 内部错误 - 磁盘组记录的配置太大 |
INTERNAL Error - The configuration is too large for the disk group log |
| 0xC100007D | 内部错误 - 磁盘记录太小无法配置磁盘组 |
INTERNAL Error - The disk log is too small for the disk group configuration |
| 0xC100007E | 内部错误 - 已导入磁盘组 |
INTERNAL Error - The disk group has already been imported |
| 0xC100007F | 内部错误 - 配置记录有错误 |
INTERNAL Error - An error exists in the configuration record |
| 0xC1000080 | 内部错误 - 配置太大无法配置副本 |
INTERNAL Error - The configuration is too large to make configuration copies |
| 0xC1000081 | 内部错误 - 未完成创建磁盘组 |
INTERNAL Error - The disk group creation is not complete |
| 0xC1000082 | 内部错误 - 在磁盘组中没有有效的记录副本 |
INTERNAL Error - There are no valid log copies in the disk group |
| 0xC1000083 | 内部错误 - 不允许在一个根目录磁盘组上操作 |
INTERNAL Error - The operation is not allowed on the root disk group |
| 0xC1000084 | 内部错误 - 逻辑磁盘管理器无法删除上一个在磁盘组中的磁盘 |
INTERNAL Error - Logical Disk Manager cannot remove the last disk in the disk group |
| 0xC1000085 | 内部错误 - 逻辑磁盘管理器无法删除上一个磁盘组配置副本 |
INTERNAL Error - Logical Disk Manager cannot remove the last disk group configuration copy |
| 0xC1000086 | 内部错误 - 逻辑磁盘管理器无法删除上一个磁盘组记录副本 |
INTERNAL Error - Logical Disk Manager cannot remove the last disk group log copy |
| 0xC1000087 | 逻辑磁盘管理配置已满。无法创建更多的对象。 |
The Logical Disk Manager configuration is full. No more objects can be created. |
| 0xC1000088 | 内部错误 - 找不到数据库文件 |
INTERNAL Error - The database file cannot be found |
| 0xC1000089 | 内部错误 - 在配置副本上有系统错误 |
INTERNAL Error - System error in configuration copy |
| 0xC100008A | 内部错误 - 在配置副本中发现格式错误 |
INTERNAL Error - A format error was found in the configuration copy |
| 0xC100008B | 不支持配置格式版本。 |
The configuration format version is not supported. |
| 0xC100008C | 内部错误 - 逻辑磁盘管理器配置已满 |
INTERNAL Error - The Logical Disk Manager configuration is full |
| 0xC100008D | 内部错误 - 配置副本的结尾异常 |
INTERNAL Error - Unexpected end of the configuration copy |
| 0xC100008E | 逻辑磁盘管理器无法读取磁盘配置。 |
Logical Disk Manager could not read the disk configuration. |
| 0xC100008F | 逻辑磁盘管理器无法写入磁盘配置。 |
Logical Disk Manager could not write the disk configuration. |
| 0xC1000090 | 内部错误 - 关联没有解决 |
INTERNAL Error - Association not resolved |
| 0xC1000091 | 内部错误 - 关联计数不正确 |
INTERNAL Error - The association count is incorrect |
| 0xC1000094 | 内部错误 - 配置副本中的无效幻数 |
INTERNAL Error - Invalid magic number in the configuration copy |
| 0xC1000095 | 内部错误 - 配置副本中的块码无效 |
INTERNAL Error - Invalid block number in the configuration copy |
| 0xC1000096 | 内部错误 - 找不到属于磁盘组的有效磁盘 |
INTERNAL Error - No valid disk belonging to the disk group was found |
| 0xC1000097 | 内部错误 - 在配置中有重复记录 |
INTERNAL Error - Duplicate records exist in the configuration |
| 0xC1000098 | 内部错误 - 配置记录不一致 |
INTERNAL Error - The configuration records are inconsistent |
| 0xC1000099 | 内部错误 - 在配置中没有磁盘组记录 |
INTERNAL Error - No disk group record exists in the configuration |
| 0xC100009A | 内部错误 - 暂时的和永久的配置不匹配 |
INTERNAL Error - The temporary and permanent configurations do not match |
| 0xC100009B | 内部错误 - 在故障恢复时磁盘上的配置已更改 |
INTERNAL Error - The on-disk configuration changed during recovery |
| 0xC100009E | 内部错误 - 在内核中找不到所要求的记录 |
INTERNAL Error - A record that was expected was not found in the kernel |
| 0xC100009F | 内部错误 - 内核中的一个记录在配置中找不到 |
INTERNAL Error - A record that exists in the kernel was not found in the configuration |
| 0xC10000A0 | 内部错误 - 配置记录与内核不匹配 |
INTERNAL Error - The configuration record does not match the kernel |
| 0xC10000A1 | 内部错误 - 内核与磁盘上的配置不匹配 |
INTERNAL Error - The kernel and on-disk configurations do not match |
| 0xC10000A2 | 内部错误 - 磁盘公用区域太小 |
INTERNAL Error - The public region of the disk is too small |
| 0xC10000A3 | 内部错误 - 磁盘专用区域太小 |
INTERNAL Error - The private region of the disk is too small |
| 0xC10000A4 | 内部错误 - 磁盘专用区域已满 |
INTERNAL Error - The private region of the disk is full |
| 0xC10000A5 | 内部错误 - 在磁盘专用区域中发现格式错误 |
INTERNAL Error - A format error was found in the private region of the disk |
| 0xC10000A6 | 内部错误 - 磁盘有不一致的磁盘标头 |
INTERNAL Error - The disk has inconsistent disk headers |
| 0xC10000A7 | 内部错误 -找不到磁盘标头 |
INTERNAL Error - The disk header cannot be found |
| 0xC10000A8 | 内部错误 - 磁盘专用区域内容无效 |
INTERNAL Error - The disk private region contents are not valid |
| 0xC10000A9 | 内部错误 - 不支持磁盘专用区域版本 |
INTERNAL Error - The disk private region version is not supported |
| 0xC10000AA | 内部错误 - 磁盘组的磁盘不一致 |
INTERNAL Error - The disks in the disk group are inconsistent |
| 0xC10000AB | 内部错误 - 不能通过重新初始化磁盘来更改属性 |
INTERNAL Error - The attribute cannot be changed by reinitializing the disk |
| 0xC10000AC | 内部错误 - 磁盘已被初始化 |
INTERNAL Error - The disk has already been initialized |
| 0xC10000AD | 内部错误 - 磁盘标头表明赋别名命令的分区 |
INTERNAL Error - The disk header indicates aliased partitions |
| 0xC10000AE | 磁盘被标为共享。不能在基本逻辑磁盘管理产品中使用。 |
The disk is marked as shared. It cannot be used in the base Logical Disk Management product. |
| 0xC10000AF | 磁盘被标为正在被另一台计算机使用。 |
The disk is marked as in use by another computer. |
| 0xC10000B1 | 内部错误 - 磁盘没有公用分区 |
INTERNAL Error - The disk has no public partition |
| 0xC10000B5 | 逻辑磁盘管理器不支持磁盘扇区大小。 |
The disk sector size is not supported by Logical Disk Manager. |
| 0xC10000B6 | 内部错误 - 磁盘组没有有效的配置副本 |
INTERNAL Error - The disk group contains no valid configuration copies |
| 0xC10000B7 | 找不到指定的磁盘。 |
The specified disk cannot be located. |
| 0xC10000B8 | 内部错误 - 磁盘属于另一个磁盘组 |
INTERNAL Error - The disk belongs to another disk group |
| 0xC10000B9 | 内部错误 - 带区列的数量对丛来说太大了 |
INTERNAL Error - The stripe column number is too large for the plex |
| 0xC10000BA | 内部错误 - 卷没有 RAID 读取策略 |
INTERNAL Error - The volume does not have RAID read policy |
| 0xC10000BB | 内部错误 - 卷有 RAID 读取策略 |
INTERNAL Error - The volume has RAID read policy |
| 0xC10000BC | 内部错误 - 卷已有 RAID 丛 |
INTERNAL Error - The volume already has one RAID plex |
| 0xC10000BE | 许可证已过期，或者此操作不可用该许可证。 |
The license has expired or is not available for the operation. |
| 0xC10000C0 | 内部错误 - 卷没有存储属性 |
INTERNAL Error - The volume does not have the storage attribute |
| 0xC10000C1 | 内部错误 - 子磁盘已在卷上定义 |
INTERNAL Error - The subdisk is defined on a volume |
| 0xC10000C3 | 内部错误 - 卷太短，无法容纳子磁盘 |
INTERNAL Error - The volume length is too small to hold subdisks |
| 0xC10000C4 | 内部错误 - 至少有一个子磁盘已在卷上定义。 |
INTERNAL Error - One or more subdisks are defined on the volume |
| 0xC10000C5 | 不允许进行该操作。原因是，这将使 RAID-5 卷无法使用。 |
The operation is not allowed because it would make the RAID-5 volume unusable. |
| 0xC10000C6 | 不允许进行该操作。原因是，RAID-5 卷目前无法使用。 |
The operation is not allowed because the RAID-5 volume is currently unusable. |
| 0xC10000C7 | 内部错误 - 丛已被禁用。 |
INTERNAL Error - The plex is disabled |
| 0xC10000CC | 内部错误 - 记录已被一个多路径的磁盘归入 |
INTERNAL Error - The record is subsumed by a multipath disk |
| 0xC10000D1 | 由于出现了系统错误，操作不成功。 |
The operation was unsuccessful because a system error occurred. |
| 0xC10000D2 | 应用户的请求，操作被取消。 |
The operation was canceled at the user's request. |
| 0xC10000D3 | 由于磁盘 I/O 错误，操作被取消。 |
The operation was canceled due to a disk I/O error. |
| 0xC10000D4 | 内部错误 - 任务已被删除 |
INTERNAL Error - The task has been deleted |
| 0xC10000D5 | 这个操作需要一个不能使用的卷。 |
This operation requires an usable volume. |
| 0xC10000D6 | 磁盘空间不足，无法满足请求。 |
There is not enough free disk space to satisfy the request. |
| 0xC10000D7 | 内部错误 - 卷创建设置失败 |
INTERNAL Error - The volume creation setup failed |
| 0xC10000D8 | 内部错误 - 镜像卷创建设置失败 |
INTERNAL Error - The mirrored volume creation setup failed |
| 0xC10000DA | 内部错误 - 卷增长操作设置失败 |
INTERNAL Error - The volume grow operation setup failed |
| 0xC10000F8 | 逻辑磁盘管理器无法为指定的卷创建分区。 |
Logical Disk Manager could not create a partition for the specified volume. |
| 0xC10000F9 | 逻辑磁盘管理器不支持将包含旧版基本卷的磁盘转换到动态。 |
Logical Disk Manager does not support conversion to dynamic for disks containing legacy basic volumes. |
| 0xC10003E8 | 逻辑磁盘管理器找不到主磁盘组 |
Logical Disk Manager could not find the primary disk group |
| 0xC10003EA | 缓存对象的类型无效 |
The type of a cached object is not valid |
| 0xC10003EB | 找不到任何缓存对象 |
A cached object could not be found |
| 0xC10003ED | 磁盘不属于任何磁盘组。 |
The disk does not belong to a disk group. |
| 0xC10003F2 | 由于卷已打开或在使用中，无法完成请求。 |
The request cannot be completed because the volume is open or in use. |
| 0xC10003F3 | 由于系统正在格式化另一个卷，你指定的卷无法得到格式化。请等格式化操作完成再继续。 |
The volume you specified cannot be formatted because the system is busy formatting another volume. Wait until that format operation is complete before continuing. |
| 0xC10003F5 | 磁盘管理管理单元中的磁盘和卷信息都已过时。要刷新磁盘和卷信息，请按 F5 或者选择“操作”菜单上的“刷新”。 |
The disk and volume information in the Disk Management snap-in is out of date. To refresh the disk and volume information, press F5 or select Refresh on the Action menu. |
| 0xC10003F6 | 由于文件系统不兼容，操作没有完成。 |
The operation did not complete because the file system is not compatible. |
| 0xC10003F7 | 由于介质不兼容，操作没有完成。 |
The operation did not complete because the media is not compatible. |
| 0xC10003F8 | 由于拒绝访问，操作没有完成。请检查你的访问权限。 |
The operation did not complete because access is denied. Check your access permissions. |
| 0xC10003F9 | 由于介质受写保护，操作没有完成。 |
The operation did not complete because the media is write-protected. |
| 0xC10003FA | 由于提供的标签无效，操作没有完成。 |
The operation did not complete because the label supplied is not valid. |
| 0xC10003FB | 由于无法进行快速格式化，操作没有完成。 |
The operation did not complete because a quick format is not possible. |
| 0xC10003FC | 由于出现了 I/O 错误，操作没有完成。有关详细信息，请查看系统事件日志。 |
The operation did not complete because an I/O error occurred. Check the System Event Log for more information. |
| 0xC10003FD | 操作需要分配给卷的驱动器号。 |
The operation requires that a drive letter be assigned to the volume. |
| 0xC10003FE | 未能完成请求。需要的文件不存在。 |
The operation did not complete because the required file is not present. |
| 0xC10003FF | 未能完成还原操作。软盘没有配置信息，或者信息已损坏。 |
The restore operation did not complete because either the floppy disk does not contain the configuration information or the information is corrupted. |
| 0xC1000400 | 未能分配驱动器号。驱动器号已在使用中。 |
The drive letter could not be assigned because it is already in use. |
| 0xC1000401 | 格式化没有顺利完成。 |
The format did not complete successfully. |
| 0xC1000402 | 逻辑磁盘管理器管理服务尚不能接受连接。 |
The Logical Disk Manager Administrative Service is not ready yet to accept connections. |
| 0xC1000403 | 逻辑磁盘管理器不能保护系统分区。 |
Logical Disk Manager cannot secure the system partition. |
| 0xC1000404 | 逻辑磁盘管理器无法使系统分区不安全。 |
Logical Disk Manager cannot unsecure the system partition. |
| 0xC1000405 | 逻辑磁盘管理器无法关闭系统。 |
Logical Disk Manager cannot shut down the system. |
| 0xC1000406 | 卷的大小对于所选的文件系统来说太大。 |
The volume size is too big for the selected file system. |
| 0xC1000407 | 卷的大小对于所选的文件系统来说太小。 |
The volume size is too small for the selected file system. |
| 0xC1000408 | 群集大小对于所选的文件系统来说太大。 |
The cluster size is too big for the selected file system. |
| 0xC1000409 | 群集大小对于所选的文件系统来说太小。 |
The cluster size is too small for the selected file system. |
| 0xC1000411 | Windows 无法加载以下逻辑磁盘管理器配置库: \"%1.dll\"。逻辑磁盘管理器可能安装得不正确，或者系统文件夹已损坏。请跟系统管理员联系。 |
Windows cannot load the following Logical Disk Manager configuration library: \"%1.dll\". Logical Disk Manager might not be properly installed, or the system folder might be corrupted. Contact your system administrator for assistance. |
| 0xC1000412 | 失败的卷不支持该请求的操作。 |
The requested operation is not supported on failed volumes. |
| 0xC1000413 | 由于介质受写保护，要求的操作无法完成。 |
The requested operation cannot be completed because the media is write-protected. |
| 0xC1000414 | 该系统上不支持动态磁盘。 |
Dynamic disks are not supported on this system. |
| 0xC1000415 | 提供的路径在一个文件系统上，该系统不支持驱动器路径。 |
The path provided is on a file system that does not support drive paths. |
| 0xC1000416 | 路径不能用来创建驱动器路径。可能是因为文件夹不存在，或者该路径已经是其他卷的驱动器路径了。 |
The path cannot be used for creating a drive path likely because the folder does not exist or is already a drive path to some other volume. |
| 0xC1000417 | 由于文件夹不是空的，路径不能用来创建驱动器路径。 |
The path cannot be used for creating a drive path because the folder is not empty. |
| 0xC1000418 | 逻辑磁盘管理器无法删除驱动器路径。 |
Logical Disk Manager cannot delete the drive path. |
| 0xC1000419 | 路径无效，无法用来创建驱动器路径。 |
The path is not valid and cannot be used for creating a drive path. |
| 0xC100041B | 可移动媒体不可使用驱动器路径。 |
Drive paths are not supported for removable media. |
| 0xC100041C | 由于拒绝访问，无法删除驱动器路径。 |
The drive path cannot be deleted because access is denied. |
| 0xC100041D | 由于分区或卷没有启用，操作未能完成。要启用分区或卷，请重新启动计算机。 |
The operation did not complete because the partition or volume is not enabled. To enable the partition or volume, restart the computer. |
| 0xC100041E | 由于簇计数比预计得高，格式化操作无法完成。 |
The format operation did not complete because the cluster count is higher than expected. |
| 0xC1000421 | 逻辑磁盘管理器管理服务已被禁用。 |
The Logical Disk Manager Administrative Service is disabled. |
| 0xC1000422 | 逻辑磁盘管理器无法更新目标磁盘上任何启动分区的启动文件。请在文件 boot.ini 中或通过 bootcfg.exe 工具来确认 arcpath 清单。 |
Logical Disk Manager could not update the boot file for any boot partitions on the target disk. Verify your arcpath listings in file boot.ini or through the bootcfg.exe utility. |
| 0xC1000423 | 磁盘配置操作没有完成。有关错误的详细信息，请查阅系统事件日志。重试之前，请确认存储设备的状态。如果这不解决问题，请关闭磁盘管理控制台，然后重新启动磁盘管理或重新启动计算机。 |
The disk configuration operation did not complete. Check the System Event Log for more information on the error. Verify the status of your storage devices before retrying. If that does not solve the problem, close the Disk Management console, then restart Disk Management or restart the computer. |
| 0xC1000424 | 目标磁盘的 arcpath 信息不存在。原因是，磁盘是在启动之后添加的，或者 SCSI BIOS 在目标磁盘的控制器上处于禁用状态。无法更新启动文件。请在文件 boot.ini 中或通过 bootcfg.exe 工具来确认 arcpath 清单。 |
Arcpath information for the target disk does not exist. Either the disk was added after booting, or the SCSI BIOS is disabled on the target disk's controller. Unable to update the boot file. Verify your arcpath listings in file boot.ini or through the bootcfg.exe utility. |
| 0xC1000425 | 未能扩展卷的文件系统。 |
Failed to extend the file system for the volume. |
| 0xC1000426 | 你已经将启动卷镜像到一个 MBR 磁盘。你将无法在 MBR 磁盘上的启动。 |
You have mirrored a boot volume to an MBR disk. You will not be able to boot from the MBR disk. |
| 0xC1000427 | 添加或删除分区后，此缓存没有被完全更新。请再次尝试此操作。 |
The cache has not completely updated after adding or removing partitions. Retry the operation. |
| 0xC10007CA | 操作没有完成。有关错误的详细信息，请查阅系统事件日志。 |
The operation did not complete. Check the System Event Log for more information on the error. |
| 0xC10007CB | 操作没有完成。有关错误的详细信息，请查阅系统事件日志。重试操作可能会纠正问题。 |
The operation did not complete. Check the System Event Log for more information on the error. Retrying the operation may fix the problem. |
| 0xC10007CC | 操作没有完成。有关错误的详细信息，请查阅系统事件日志。请关闭磁盘管理控制台，然后在重试之前重新启动磁盘管理。 |
The operation did not complete. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management before retrying the operation. |
| 0xC10007CD | 操作没有完成。有关错误的详细信息，请查阅系统事件日志。重试之前，请重新启动计算机。 |
The operation did not complete. Check the System Event Log for more information on the error. Restart the computer before retrying the operation. |
| 0xC10007CE | 没有动态磁盘。 |
No dynamic disks are present. |
| 0xC10007CF | 出现了内部错误。请关闭磁盘管理控制台，然后重新启动磁盘管理，或者重新启动计算机。 |
An internal error has occurred. Close the Disk Management console, then restart Disk Management or restart the computer. |
| 0xC10007D0 | 这个卷含有一个页面文件。 |
This volume contains a pagefile. |
| 0xC10007D1 | 这个卷被标为活动(系统)卷。 |
This volume is marked as an active (system) volume. |
| 0xC10007D2 | 这个卷被配置为用来容纳故障转储文件。 |
This volume is configured to hold a crashdump file. |
| 0xC10007D3 | 由于卷已打开或在使用中，请求无法完成。该卷可能被配置成系统、启动或页面文件，或容纳故障转储文件。 |
The request cannot be completed because the volume is open or in use. It may be configured as a system, boot, or pagefile volume, or, to hold a crashdump file. |
| 0xC10007D4 | 已将启动卷镜像到了 GPT 磁盘。你将无法从 GPT 磁盘启动。 |
You have mirrored a boot volume to a GPT disk. You will not be able to boot from the GPT disk. |