0x1 | 操作失败(%3、%4、%5、%6)。%n%1%nHResult: %2 |
An operation has failed (%3, %4, %5, %6).%n%1%nHResult: %2 |
0x2 | 操作失败(%3、%4、%5、%6)。%n%1%nWin32Error: %2 |
An operation has failed (%3, %4, %5, %6).%n%1%nWin32Error: %2 |
0x3 | 操作失败(%3、%4、%5、%6)。%n%1%nNTStatus: %2 |
An operation has failed (%3, %4, %5, %6).%n%1%nNTStatus: %2 |
0x4 | 无法分配对象。%n对象: %1%n大小: %2 |
Failed to allocate object.%nObject: %1%nSize: %2 |
0x5 | 大小异常。%n对象: %1%n预期大小: %2%n实际大小: %3 |
Unexpected size.%nObject: %1%nExpected Size: %2%nActual Size: %3 |
0x6 | 无效数据。%n名称: %1%n值: %2 |
Invalid data.%nName: %1%nValue: %2 |
0x7 | 设备以错误状态进行响应。%n状态: %1 |
Device responded with an error status.%nStatus: %1 |
0x8 | 设备错误。%n设备: %1%n原因: %2 |
Bad device.%nDevice: %1%nReason: %2 |
0x9 | 不支持该功能。%n功能: %1%n上下文: %2 |
The function is not supported.%nFunction: %1%nContext: %2 |
0xA | Request[%1](CLS=%2,INS=%3,P1=%4,P2=%5,Lc=%6,Le=%7,.NETServiceMethod=%8) |
Request[%1](CLS=%2,INS=%3,P1=%4,P2=%5,Lc=%6,Le=%7,.NETServiceMethod=%8) |
0xB | A Request has returned failure.%nMsgType: %1%nICCStatus: %2%nCmdStatus: %3%nError: %4%nSW1: %5%nSW2: %6 |
A Request has returned failure.%nMsgType: %1%nICCStatus: %2%nCmdStatus: %3%nError: %4%nSW1: %5%nSW2: %6 |
0xC | 设备在 %2 毫秒之内生成了 %1 个未知中断。%n上次未知中断消息: %3。 |
The device generated %1 unknown interrupt(s) in %2 ms.%nLast Unknown Interrupt Message: %3. |
0x64 | 已发生下列调试信息性事件(%2、%3、%4、%5)。%n%1 |
The following debug informational event has occurred (%2, %3, %4, %5).%n%1 |
0x65 | 已发生下列调试警告事件(%2、%3、%4、%5)。%n%1 |
The following debug warning event has occurred (%2, %3, %4, %5).%n%1 |
0x66 | 已发生下列调试错误事件(%2、%3、%4、%5)。%n%1 |
The following debug error event has occurred (%2, %3, %4, %5).%n%1 |
0x67 | 智能卡读卡器报告下列类别描述符。 |
The Smartcard reader reported the following class descriptor. |
0x68 | 智能卡读卡器报告下列类别描述符(第 1 部分)。 |
The Smartcard reader reported the following class descriptor (part 1). |
0x69 | 智能卡读卡器报告下列类别描述符(第 2 部分)。 |
The Smartcard reader reported the following class descriptor (part 2). |
0x6A | 智能卡读卡器报告了一个无效的类描述符值。 |
The Smartcard reader reported an invalid class descriptor value. |
0x3000000A | 常规 |
General |
0x3000000B | INIT |
Init |
0x3000000C | PnP |
Pnp |
0x3000000D | 电源 |
Power |
0x3000000E | IoRequest |
IoRequest |
0x3000000F | Ioctl |
Ioctl |
0x30000010 | IoQueue |
IoQueue |
0x30000011 | ClassExt |
ClassExt |
0x50000002 | 错误 |
Error |
0x50000003 | 警告 |
Warning |
0x50000004 | 信息 |
Information |
0x70000001 | 驱动程序 |
Driver |
0x90000001 | Microsoft-Windows-WudfUsbccidDrv |
Microsoft-Windows-WudfUsbccidDrv |
0x90000002 | System |
System |
0xF0000001 | 5.0V |
5.0V |
0xF0000002 | 3.0V |
3.0V |
0xF0000003 | 1.8V |
1.8V |
0xF0000004 | T0 |
T0 |
0xF0000005 | T1 |
T1 |
0xF0000006 | 2 线 |
2-wire |
0xF0000007 | 3 线 |
3-wire |
0xF0000008 | I2C |
I2C |
0xF0000009 | 卡弹入 |
Card accept |
0xF000000A | 卡弹出 |
Card eject |
0xF000000B | 卡捕获 |
Card capture |
0xF000000C | 卡锁定/解除锁定 |
Card lock/unlock |
0xF000000D | 基于 ATR 自动参数 |
Auto parameter based on ATR |
0xF000000E | 自动 ICC 激活 |
Auto ICC activation |
0xF000000F | 自动 ICC 电压 |
Auto ICC voltage |
0xF0000010 | 自动 ICC 时钟 |
Auto ICC clock |
0xF0000011 | 自动波特率 |
Auto baud rate |
0xF0000012 | 自动参数协商 |
Auto parameters negotiation |
0xF0000013 | 自动 PPS |
Auto PPS |
0xF0000014 | 可以在时钟停止模式下设置 ICC |
Can set ICC in clock stop mode |
0xF0000015 | 不接受零 NAD 值 |
Non-zero NAD value accepted |
0xF0000016 | 自动 IFSD 交换 |
Auto IFSD exchange |
0xF0000017 | TPDU 级别交换 |
TPDU level exchange |
0xF0000018 | 短 APDU 级别交换 |
Short APDU level exchange |
0xF0000019 | 短和扩展 APDU 级别交换 |
Short and Extended APDU level exchange |
0xF000001A | 支持选择性暂停 |
Support selective suspend |
0xF000001B | 支持 PIN 验证 |
PIN Verification supported |
0xF000001C | 支持 PIN 修改 |
PIN Modification supported |