0x40002710 | ---- 支持的命令 ----8dot3name 8dot3name 管理behavior 控制文件系统行为dirty 管理卷的非正常位file 文件特定的命令fsinfo 文件系统信息hardlink 硬链接管理objectid 对象 ID 管理quota 配额管理repair 自愈管理reparsepoint 重分析点管理resource 事务性资源管理器管理sparse 稀疏文件控制tiering 存储分层属性管理transaction 事务管理usn USN 管理volume 卷管理wim 透明 wim 托管管理 |
---- Commands Supported ----8dot3name 8dot3name managementbehavior Control file system behaviordirty Manage volume dirty bitfile File specific commandsfsinfo File system informationhardlink Hardlink managementobjectid Object ID managementquota Quota managementrepair Self healing managementreparsepoint Reparse point managementresource Transactional Resource Manager managementsparse Sparse file controltiering Storage tiering property managementtransaction Transaction managementusn USN managementvolume Volume managementwim Transparent wim hosting management |
0x40002711 | 错误: %0 |
Error: %0 |
0x40002712 | 驱动器: %0 |
Drives: %0 |
0x40002713 | 用法: fsutil fsinfo driveType 示例: fsutil fsinfo driveType C: |
Usage : fsutil fsinfo driveType Eg : fsutil fsinfo driveType C: |
0x40002714 | %1 - 未知驱动器 |
%1 - Unknown Drive |
0x40002715 | %1 - 没有类似根目录 |
%1 - No such Root Directory |
0x40002716 | %1 - 可移动驱动器 |
%1 - Removable Drive |
0x40002717 | %1 - 固定驱动器 |
%1 - Fixed Drive |
0x40002718 | %1 - 远程/网络驱动器 |
%1 - Remote/Network Drive |
0x40002719 | %1 - CD-ROM 驱动器 |
%1 - CD-ROM Drive |
0x4000271A | %1 - Ram 磁盘 |
%1 - Ram Disk |
0x4000271B | 用法: fsutil fsinfo volumeInfo 示例: fsutil fsinfo volumeInfo C: |
Usage : fsutil fsinfo volumeInfo Eg : fsutil fsinfo volumeInfo C: |
0x4000271C | 支持区分大小写的文件名 |
Supports Case-sensitive filenames |
0x4000271D | 保留文件名的大小写 |
Preserves Case of filenames |
0x4000271E | 支持文件名中的 Unicode |
Supports Unicode in filenames |
0x4000271F | 保留并加强 ACL |
Preserves & Enforces ACL's |
0x40002720 | 支持基于文件的压缩 |
Supports file-based Compression |
0x40002721 | 支持磁盘配额 |
Supports Disk Quotas |
0x40002722 | 支持稀疏文件 |
Supports Sparse files |
0x40002723 | 支持重分析点 |
Supports Reparse Points |
0x40002724 | 支持远程存储 |
Supports Remote Storage |
0x40002725 | 被压缩的卷 |
Compressed volume |
0x40002726 | 支持对象标识符 |
Supports Object Identifiers |
0x40002727 | 支持加密文件系统 |
Supports Encrypted File System |
0x40002728 | 支持事务 |
Supports Transactions |
0x40002729 | 支持带有名称的数据流 |
Supports Named Streams |
0x4000272A | 卷名 : %1 |
Volume Name : %1 |
0x4000272B | 卷序列号 : 0x%1!x! |
Volume Serial Number : 0x%1!x! |
0x4000272C | 组件长度最大值 : %1!d! |
Max Component Length : %1!d! |
0x4000272D | 文件系统名 : %1 |
File System Name : %1 |
0x4000272E | 用法 : fsutil volume diskfree 例如 : fsutil volume diskfree C: |
Usage : fsutil volume diskfree Eg : fsutil volume diskfree C: |
0x4000272F | 可用字节总数 : %1字节总数 : %2可用的尚未使用的字节总数 : %3 |
Total # of free bytes : %1Total # of bytes : %2Total # of avail free bytes : %3 |
0x40002730 | 打开 eventlog 句柄时的错误 |
Error opening handle for eventlog |
0x40002731 | 正在 %1 事件日志中搜索... |
Searching in %1 Event Log... |
0x40002732 | **** 用户达到了其配额阈值 ! **** |
**** A user hit their quota threshold ! **** |
0x40002733 | **** 用户达到了其配额限制 ! **** |
**** A user hit their quota limit ! **** |
0x40002734 | 事件 ID : 0x%1!x! |
Event ID : 0x%1!x! |
0x40002735 | 事件类型 : 错误 |
EventType : Error |
0x40002736 | 事件类型 : 警告 |
EventType : Warning |
0x40002737 | 事件类型 : 信息 |
EventType : Information |
0x40002738 | 事件类型 : 审核访问 |
EventType : Audit success |
0x40002739 | 事件类型 : 审核失败 |
EventType : Audit failure |
0x4000273A | 事件类别 : %1!d! |
Event Category : %1!d! |
0x4000273B | 来源 : %1 |
Source : %1 |
0x4000273C | 数据: %1 |
Data: %1 |
0x4000273D | 没有发现配额冲突现象 |
No quota violations detected |
0x4000273E | 用户: %1\\%2 |
User: %1\\%2 |
0x4000273F | 用法: fsutil behavior query AllowExtCharBugcheckOnCorruptDisable8dot3DisableCompressionDisableEncryptionDisableLastAccessEncryptPagingFileMftZoneMemoryUsageQuotaNotifySymlinkEvaluationDisableDeleteNotifyDisableWriteAutoTieringDisableTxf |
Usage : fsutil behavior query AllowExtCharBugcheckOnCorruptDisable8dot3DisableCompressionDisableEncryptionDisableLastAccessEncryptPagingFileMftZoneMemoryUsageQuotaNotifySymlinkEvaluationDisableDeleteNotifyDisableWriteAutoTieringDisableTxf |
0x40002740 | 用法 : fsutil volume dismount 例如 : fsutil volume dismount C: |
Usage : fsutil volume dismount Eg : fsutil volume dismount C: |
0x40002741 | Formerly MSG_USAGE_QUERY_CLUSTER |
Formerly MSG_USAGE_QUERY_CLUSTER |
0x40002742 | Formerly MSG_QUERY_CLUSTER |
Formerly MSG_QUERY_CLUSTER |
0x40002743 | 用法 : fsutil dirty set 例如 : fsutil dirty set C: |
Usage : fsutil dirty set Eg : fsutil dirty set C: |
0x40002744 | 用法 : fsutil fsinfo statistics 例如 : fsutil fsinfo statistics C: |
Usage : fsutil fsinfo statistics Eg : fsutil fsinfo statistics C: |
0x40002745 | UserFileReads : %1UserFileReadBytes : %2UserDiskReads : %3UserFileWrites : %4UserFileWriteBytes : %5UserDiskWrites : %6MetaDataReads : %7MetaDataReadBytes : %8MetaDataDiskReads : %9MetaDataWrites : %10MetaDataWriteBytes : %11MetaDataDiskWrites : %12 |
UserFileReads : %1UserFileReadBytes : %2UserDiskReads : %3UserFileWrites : %4UserFileWriteBytes : %5UserDiskWrites : %6MetaDataReads : %7MetaDataReadBytes : %8MetaDataDiskReads : %9MetaDataWrites : %10MetaDataWriteBytes : %11MetaDataDiskWrites : %12 |
0x40002746 | CreateHits : %1SuccessfulCreates : %2FailedCreates : %3NonCachedReads : %4NonCachedRead Bytes : %5NonCachedWrites : %6NonCachedWrite Bytes : %7NonCachedDiskReads : %8NonCachedDiskWrites : %9 |
CreateHits : %1SuccessfulCreates : %2FailedCreates : %3NonCachedReads : %4NonCachedRead Bytes : %5NonCachedWrites : %6NonCachedWrite Bytes : %7NonCachedDiskReads : %8NonCachedDiskWrites : %9 |
0x40002747 | MftReads : %1MftReadBytes : %2MftWrites : %3MftWriteBytes : %4Mft2Writes : %5Mft2WriteBytes : %6RootIndexReads : %7RootIndexReadBytes : %8RootIndexWrites : %9RootIndexWriteBytes : %10BitmapReads : %11BitmapReadBytes : %12BitmapWrites : %13BitmapWriteBytes : %14MftBitmapReads : %15MftBitmapReadBytes : %16MftBitmapWrites : %17MftBitmapWriteBytes : %18UserIndexReads : %19UserIndexReadBytes : %20UserIndexWrites : %21UserIndexWriteBytes : %22LogFileReads : %23LogFileReadBytes : %24LogFileWrites : %25LogFileWriteBytes : %26LogFileFull : %27DiskResourceFailure : %28 |
MftReads : %1MftReadBytes : %2MftWrites : %3MftWriteBytes : %4Mft2Writes : %5Mft2WriteBytes : %6RootIndexReads : %7RootIndexReadBytes : %8RootIndexWrites : %9RootIndexWriteBytes : %10BitmapReads : %11BitmapReadBytes : %12BitmapWrites : %13BitmapWriteBytes : %14MftBitmapReads : %15MftBitmapReadBytes : %16MftBitmapWrites : %17MftBitmapWriteBytes : %18UserIndexReads : %19UserIndexReadBytes : %20UserIndexWrites : %21UserIndexWriteBytes : %22LogFileReads : %23LogFileReadBytes : %24LogFileWrites : %25LogFileWriteBytes : %26LogFileFull : %27DiskResourceFailure : %28 |
0x40002748 | 文件系统类型 : FAT |
File System Type : FAT |
0x40002749 | 文件系统类型 : NTFS |
File System Type : NTFS |
0x4000274A | 用法 : fsutil file setvaliddata 例如 : fsutil file setvaliddata C:\\testfile.txt 4096 |
Usage : fsutil file setvaliddata Eg : fsutil file setvaliddata C:\\testfile.txt 4096 |
0x4000274B | 用法 : fsutil file setshortname 例如 : fsutil file setshortname C:\\testfile.txt testfile |
Usage : fsutil file setshortname Eg : fsutil file setshortname C:\\testfile.txt testfile |
0x4000274C | FSUTIL 实用工具需要一个本地 NTFS 卷才能执行此操作。 |
The FSUTIL utility requires a local NTFS volume for this operation. |
0x4000274D | 用法 : fsutil file queryallocranges offset= length= offset : 文件偏移,要查询的范围起始 length : 范围大小,单位为字节 例如 : fsutil file queryallocranges offset=1024 length=64 C:\\Temp\\sample.txt |
Usage : fsutil file queryallocranges offset= length= offset : File Offset, the start of the range to query length : Size, in bytes, of the range Eg : fsutil file queryallocranges offset=1024 length=64 C:\\Temp\\sample.txt |
0x4000274E | 以前为 MSG_ALLOCRANGE_RANGES |
Formerly MSG_ALLOCRANGE_RANGES |
0x4000274F | 用法 : fsutil file setzerodata offset= length= offset : 文件偏移,设为零的范围的起始 length : 零范围的字节长度 例如 : fsutil file setzerodata offset=100 length=150 C:\\Temp\\sample.txt |
Usage : fsutil file setzerodata offset= length= offset : File offset, the start of the range to set to zeroes length : Byte length of the zeroed range Eg : fsutil file setzerodata offset=100 length=150 C:\\Temp\\sample.txt |
0x40002750 | 用法: fsutil sparse setflag [1|0] 示例: fsutil sparse setflag C:\\Temp\\sample.txt |
Usage : fsutil sparse setflag [1|0] Eg : fsutil sparse setflag C:\\Temp\\sample.txt |
0x40002751 | 用法: fsutil fsinfo ntfsInfo 示例: fsutil fsinfo ntfsInfo C: |
Usage : fsutil fsinfo ntfsInfo Eg : fsutil fsinfo ntfsInfo C: |
0x40002752 | NTFS 卷序列号: 0x%1NTFS 版本: %2!d!.%3!d!LFS 版本: %18!d!.%19!d!扇区数量: 0x%4簇总数: 0x%5可用簇: 0x%6保留总数: 0x%7每个扇区字节数: %8!d!每个物理扇区字节数: %17!d!每个簇字节数: %9!d!每个 FileRecord 段字节数: %10!d!每个 FileRecord 段簇数: %11!d!Mft 有效数据长度: 0x%12Mft 起始 Lcn: 0x%13Mft2 起始 Lcn: 0x%14Mft 区域起始: 0x%15Mft 区域结尾: 0x%16最大设备剪裁盘区计数: %20!u!最大设备剪裁字节计数: 0x%21!x!最大卷剪裁盘区计数: %22!u!最大卷剪裁字节计数: 0x%23!x! |
NTFS Volume Serial Number : 0x%1NTFS Version : %2!d!.%3!d!LFS Version : %18!d!.%19!d!Number Sectors : 0x%4Total Clusters : 0x%5Free Clusters : 0x%6Total Reserved : 0x%7Bytes Per Sector : %8!d!Bytes Per Physical Sector : %17!d!Bytes Per Cluster : %9!d!Bytes Per FileRecord Segment : %10!d!Clusters Per FileRecord Segment : %11!d!Mft Valid Data Length : 0x%12Mft Start Lcn : 0x%13Mft2 Start Lcn : 0x%14Mft Zone Start : 0x%15Mft Zone End : 0x%16Max Device Trim Extent Count : %20!u!Max Device Trim Byte Count : 0x%21!x!Max Volume Trim Extent Count : %22!u!Max Volume Trim Byte Count : 0x%23!x! |
0x40002753 | 用法 : fsutil dirty query 例如 : fsutil dirty query C: |
Usage : fsutil dirty query Eg : fsutil dirty query C: |
0x40002754 | 卷 - %1!s! 已损坏 |
Volume - %1!s! is Dirty |
0x40002755 | 卷 - %1!s! 没有损坏 |
Volume - %1!s! is NOT Dirty |
0x40002756 | 用法 : fsutil reparsepoint query 例如 : fsutil reparsepoint query C:\\Server |
Usage : fsutil reparsepoint query Eg : fsutil reparsepoint query C:\\Server |
0x40002757 | 重分析标记值 : 0x%1!08x! |
Reparse Tag Value : 0x%1!08x! |
0x40002758 | 标记值: Microsoft |
Tag value: Microsoft |
0x40002759 | 标记值: Name Surrogate |
Tag value: Name Surrogate |
0x4000275A | 标记值: 符号链接 |
Tag value: Symbolic Link |
0x4000275B | 标记值: 装入点 |
Tag value: Mount Point |
0x4000275C | 标记值: HSM |
Tag value: HSM |
0x4000275D | 标记值: SIS |
Tag value: SIS |
0x4000275E | 标记值: 筛选管理程序 |
Tag value: Filter Manager |
0x4000275F | 标记值: DFS |
Tag value: DFS |
0x40002760 | GUID : %1!s! |
GUID : %1!s! |
0x40002761 | 重分析数据: |
Reparse Data: |
0x40002762 | 用法 : fsutil reparsepoint delete 例如 : fsutil reparsepoint delete C:\\Server |
Usage : fsutil reparsepoint delete Eg : fsutil reparsepoint delete C:\\Server |
0x40002763 | 用法 : fsutil objectid set ObjectId : 32 个数字的十六进制数据 BirthVolumeId : 32 个数字的十六进制数据 BirthObjectId : 32 个数字的十六进制数据 DomainId : 32 个数字的十六进制数据 所有值都必须是十六进制的形式 40dff02fc9b4d4118f120090273fa9fc Eg : fsutil objectid set 40dff02fc9b4d4118f120090273fa9fc f86ad6865fe8d21183910008c709d19e 40dff02fc9b4d4118f120090273fa9fc 00000000000000000000000000000000 C:\\Temp\\sample.txt |
Usage : fsutil objectid set ObjectId : 32-digit hexadecimal data BirthVolumeId : 32-digit hexadecimal data BirthObjectId : 32-digit hexadecimal data DomainId : 32-digit hexadecimal data All values must be in Hex of the form 40dff02fc9b4d4118f120090273fa9fc Eg : fsutil objectid set 40dff02fc9b4d4118f120090273fa9fc f86ad6865fe8d21183910008c709d19e 40dff02fc9b4d4118f120090273fa9fc 00000000000000000000000000000000 C:\\Temp\\sample.txt |
0x40002764 | 用法 : fsutil objectid query 例如 : fsutil objectid query C:\\Temp\\sample.txt |
Usage : fsutil objectid query Eg : fsutil objectid query C:\\Temp\\sample.txt |
0x40002765 | 用法 : fsutil objectid create 例如 : fsutil objectid create C:\\Temp\\sample.txt |
Usage : fsutil objectid create Eg : fsutil objectid create C:\\Temp\\sample.txt |
0x40002766 | 用法 : fsutil objectid delete 例如 : fsutil objectid delete C:\\Temp\\sample.txt |
Usage : fsutil objectid delete Eg : fsutil objectid delete C:\\Temp\\sample.txt |
0x40002767 | 对象 ID : %0 |
Object ID : %0 |
0x40002768 | BirthVolume ID : %0 |
BirthVolume ID : %0 |
0x40002769 | BirthObjectId ID : %0 |
BirthObjectId ID : %0 |
0x4000276A | 域 ID : %0 |
Domain ID : %0 |
0x4000276B | 用法 : fsutil usn createjournal m= a= 例如 : fsutil usn createjournal m=1000 a=100 C: |
Usage : fsutil usn createjournal m= a= Eg : fsutil usn createjournal m=1000 a=100 C: |
0x4000276C | 主要版本 : 0x%1!x!次要版本 : 0x%2!x!FileRef# : 0x%3Parent FileRef# : 0x%4Usn : 0x%5时间戳 : 0x%6 %7 %8原因 : 0x%9!lx!源信息 : 0x%10!lx!安全 Id : 0x%11!lx!文件属性 : 0x%12!lx!文件名长度 : 0x%13!x!文件名偏移 : 0x%14!x!文件名 : %15!.*ws! |
Major Version : 0x%1!x!Minor Version : 0x%2!x!FileRef# : 0x%3Parent FileRef# : 0x%4Usn : 0x%5Time Stamp : 0x%6 %7 %8Reason : 0x%9!lx!Source Info : 0x%10!lx!Security Id : 0x%11!lx!File Attributes : 0x%12!lx!File Name Length : 0x%13!x!File Name Offset : 0x%14!x!FileName : %15!.*ws! |
0x4000276D | 用法 : fsutil usn queryjournal 例如 : fsutil usn queryjournal C: |
Usage : fsutil usn queryjournal Eg : fsutil usn queryjournal C: |
0x4000276E | Usn 日志 ID : 0x%1第一个 Usn : 0x%2下一个 Usn : 0x%3最低的有效 Usn : 0x%4最大 Usn : 0x%5最大值 : 0x%6分配差 : 0x%7 |
Usn Journal ID : 0x%1First Usn : 0x%2Next Usn : 0x%3Lowest Valid Usn : 0x%4Max Usn : 0x%5Maximum Size : 0x%6Allocation Delta : 0x%7 |
0x4000276F | 用法 : fsutil usn deletejournal /D : Delete /N : Notify例如 : usn deletejournal /D C: |
Usage : fsutil usn deletejournal /D : Delete /N : Notify Eg : usn deletejournal /D C: |
0x40002770 | 用法 : fsutil usn enumdata 例如 : fsutil usn enumdata 1 0 1 C: |
Usage : fsutil usn enumdata Eg : fsutil usn enumdata 1 0 1 C: |
0x40002771 | 文件参照号# : 0x%1父文件参照号 : 0x%2Usn : 0x%3安全 Id : 0x%4!08x!原因 : 0x%5!08x!名称(%6!03d!) : %7!.*ws! |
File Ref# : 0x%1ParentFile Ref# : 0x%2Usn : 0x%3SecurityId : 0x%4!08x!Reason : 0x%5!08x!Name (%6!03d!) : %7!.*ws! |
0x40002772 | 用法 : fsutil usn readdata 例如 : fsutil usn readdata C:\\Temp\\sample.txt |
Usage : fsutil usn readdata Eg : fsutil usn readdata C:\\Temp\\sample.txt |
0x40002773 | 用法 : fsutil file findbysid 例如 : fsutil file findbysid scottb C:\\users |
Usage : fsutil file findbysid Eg : fsutil file findbysid scottb C:\\users |
0x40002774 | ---- 支持的行为命令 ----query 查询文件系统行为参数set 更改文件系统行为参数 |
---- BEHAVIOR Commands Supported ----query Query the file system behavior parametersset Change the file system behavior parameters |
0x40002775 | %1 = %2!u! |
%1 = %2!u! |
0x40002776 | 当前没有设置 %1 |
%1 is not currently set |
0x40002777 | ---- 支持的 DIRTY 命令 ----query 查询有问题的位数set 设置有问题的位数 |
---- DIRTY Commands Supported ----query Query the dirty bitset Set the dirty bit |
0x40002778 | ---- 支持的 FILE 命令 ----createnew 创建指定大小的新文件findbysid 按安全标识符查找文件optimizemetadata 优化文件的元数据queryallocranges 查询文件的分配范围queryextents 查询文件的范围queryextentsandrefcounts 查询文件的范围及其相应的引用计数queryfileid 查询指定文件的文件 IDqueryfilenamebyid 显示文件 ID 的随机链接名称queryoptimizemetadata 查询文件的优化元数据状态queryvaliddata 查询文件的有效数据长度setshortname 设置文件的短名称setvaliddata 设置文件的有效数据长度setzerodata 设置文件的零数据seteof 为现有文件设置文件尾 |
---- FILE Commands Supported ----createnew Creates a new file of a specified sizefindbysid Find a file by security identifieroptimizemetadata Optimize metadata for a filequeryallocranges Query the allocated ranges for a filequeryextents Query the extents for a filequeryextentsandrefcounts Query the extents and their corresponding refcounts for a filequeryfileid Queries the file ID of the specified filequeryfilenamebyid Displays a random link name for the file IDqueryoptimizemetadata Query the optimize metadata state for a filequeryvaliddata Queries the valid data length for a filesetshortname Set the short name for a filesetvaliddata Set the valid data length for a filesetzerodata Set the zero data for a fileseteof Sets the end of file for an existing file |
0x40002779 | ---- 支持的 FSINFO 命令 ----drives 列出所有驱动器driveType 查询驱动器的驱动器类型ntfsInfo 查询特定于 NTFS 的卷信息refsInfo 查询特定于 REFS 的卷信息sectorInfo 查询扇区信息statistics 查询文件系统统计信息volumeInfo 查询卷信息 |
---- FSINFO Commands Supported ----drives List all drivesdriveType Query drive type for a driventfsInfo Query NTFS specific volume informationrefsInfo Query REFS specific volume informationsectorInfo Query sector informationstatistics Query file system statisticsvolumeInfo Query volume information |
0x4000277A | ---- 支持的 HARDLINK 命令 ----create 创建硬链接list 枚举文件上的硬链接 |
---- HARDLINK Commands Supported ----create Create a hardlinklist Enumerate hardlinks on a file |
0x4000277B | ---- 支持的 OBJECTID 命令 ----create 创建对象标识符delete 删除对象标识符query 查询对象标识符set 更改对象标识符 |
---- OBJECTID Commands Supported ----create Create the object identifierdelete Delete the object identifierquery Query the object identifierset Change the object identifier |
0x4000277C | ---- 支持的 QUOTA 命令 ----disable 禁用配额跟踪和强制enforce 启用配额强制modify 为用户设置磁盘配额query 查询磁盘配额track 启用配额跟踪violations 显示配额冲突 |
---- QUOTA Commands Supported ----disable Disable quota tracking and enforcementenforce Enable quota enforcementmodify Sets disk quota for a userquery Query disk quotastrack Enable quota trackingviolations Display quota violations |
0x4000277D | ---- 支持的 REPARSEPOINT 命令 ----delete 删除重分析点query 查询重分析点 |
---- REPARSEPOINT Commands Supported ----delete Delete a reparse pointquery Query a reparse point |
0x4000277E | ---- 支持的 RESOURCE 命令 ----create 创建辅助事务性资源管理器info 显示与事务性资源管理器相关的信息setautoreset 设置默认事务性资源管理器是否将在下次装载时清除其事务性元数据setavailable 将事务性资源管理器设置为首选可用性而不是一致性setconsistent 将事务性资源管理器设置为首选一致性而不是可用性setlog 更改正在运行的事务性资源管理器的特性start 启动事务性资源管理器stop 停止事务性资源管理器 |
---- RESOURCE Commands Supported ----create Create a Secondary Transactional Resource Managerinfo Display information relating to a Transactional Resource Managersetautoreset Set whether a default Transactional Resource Manager will clean its transactional metadata on next mountsetavailable Set a Transactional Resource Manager to prefer availability over consistencysetconsistent Set a Transactional Resource Manager to prefer consistency over availabilitysetlog Change characteristics of a running Transactional Resource Managerstart Start a Transactional Resource Managerstop Stop a Transactional Resource Manager |
0x4000277F | ---- 支持 SETLOG 命令 ----growth 更改自动增长设置maxextents 更改容器的最大数量minextents 更改容器的最小数量mode 在仅撤消记录和完整记录之间切换rename 更改 RM 的 Guidshrink 更改自动收缩设置size 显式更改容器的数量 |
---- SETLOG Commands Supported ----growth Change the automatic growth settingsmaxextents Change the maximum number of containersminextents Change the minimum number of containersmode Switch between undo only logging and full loggingrename Change the RM's Guidshrink Change the automatic shrink settingssize Change the number of containers explicitly |
0x40002780 | Formerly MSG_USAGE_SHORT_NAME |
Formerly MSG_USAGE_SHORT_NAME |
0x40002781 | ---- 支持的 SPARSE 命令 ----queryflag 查询稀疏queryrange 查询范围setflag 设置稀疏setrange 设置稀疏范围 |
---- SPARSE Commands Supported ----queryflag Query sparsequeryrange Query rangesetflag Set sparsesetrange Set sparse range |
0x40002782 | ---- 支持的 TRANSACTION 命令 ----commit 提交指定事务fileinfo 显示特定文件的事务信息list 显示当前正在运行的事务query 显示指定事务的信息rollback 回退指定事务 |
---- TRANSACTION Commands Supported ----commit Commit a specified transactionfileinfo Display transaction information for a specific filelist Display currently running transactionsquery Display information on a specified transactionrollback Rollback a specified transaction |
0x40002783 | ---- 支持的 USN 命令 ----createjournal 创建 USN 日志deletejournal 删除 USN 日志enumdata 枚举 USN 数据readjournal 读取 USN 日志中的 USN 记录queryjournal 查询卷的 USN 数据readdata 读取文件的 USN 数据enablerangetracking 为卷启用写入范围跟踪 |
---- USN Commands Supported ----createjournal Create a USN journaldeletejournal Delete a USN journalenumdata Enumerate USN datareadjournal Reads the USN records in the USN journalqueryjournal Query the USN data for a volumereaddata Read the USN data for a fileenablerangetracking Enable write range tracking for a volume |
0x40002784 | ---- 支持的 VOLUME 命令 ----list 列出卷diskfree 查询卷的可用空间dismount 卸除卷querycluster 查询使用特定簇的文件filelayout 查询有关文件的所有可用信息allocationreport 分配的簇报告querynumainfo 查询给定卷的 NUMA 节点 |
---- VOLUME Commands Supported ----list List volumesdiskfree Query the free space of a volumedismount Dismount a volumequerycluster Query which file is using a particular clusterfilelayout Query all the information available about the file(s)allocationreport Allocated clusters reportquerynumainfo Queries the NUMA node for the given volume |
0x40002785 | 用法 : fsutil transaction rollback 例如 : fsutil transaction rollback {0f2d8905-6153-449a-8e03-7d3a38187ba1} |
Usage : fsutil transaction rollback Eg : fsutil transaction rollback {0f2d8905-6153-449a-8e03-7d3a38187ba1} |
0x40002786 | 用法 : fsutil transaction commit 例如 : fsutil transaction commit {0f2d8905-6153-449a-8e03-7d3a38187ba1} |
Usage : fsutil transaction commit Eg : fsutil transaction commit {0f2d8905-6153-449a-8e03-7d3a38187ba1} |
0x40002787 | 用法 : fsutil transaction query [files|all] 例如 : fsutil transaction query {0f2d8905-6153-449a-8e03-7d3a38187ba1} |
Usage : fsutil transaction query [files|all] Eg : fsutil transaction query {0f2d8905-6153-449a-8e03-7d3a38187ba1} |
0x40002788 | 用法 : fsutil transaction fileinfo 例如 : fsutil transaction fileinfo d:\\foobar.txt |
Usage : fsutil transaction fileinfo Eg : fsutil transaction fileinfo d:\\foobar.txt |
0x40002789 | 用法 : fsutil resource create 例如 : fsutil resource create d:\\foobar |
Usage : fsutil resource create Eg : fsutil resource create d:\\foobar |
0x4000278A | 用法 : fsutil resource start [ ]例如 : fsutil resource start d:\\foobar fsutil resource start d:\\foobar d:\\foobar\\LogDir\\LogBLF::TxfLog d:\\foobar\\LogDir\\LogBLF::TmLog |
Usage : fsutil resource start [ ] Eg : fsutil resource start d:\\foobar fsutil resource start d:\\foobar d:\\foobar\\LogDir\\LogBLF::TxfLog d:\\foobar\\LogDir\\LogBLF::TmLog |
0x4000278B | 用法 : fsutil resource stop 例如 : fsutil resource stop d:\\foobar |
Usage : fsutil resource stop Eg : fsutil resource stop d:\\foobar |
0x4000278C | 用法 : fsutil resource info 例如 : fsutil resource info d:\\foobar |
Usage : fsutil resource info Eg : fsutil resource info d:\\foobar |
0x4000278D | 用法 : fsutil resource txnreset []例如 : fsutil resource txnreset d:\\foobar |
Usage : fsutil resource txnreset [] Eg : fsutil resource txnreset d:\\foobar |
0x4000278E | 用法 : fsutil resource setautoreset true fsutil resource setautoreset false 例如: fsutil resource setautoreset true d:\\ |
Usage : fsutil resource setautoreset true fsutil resource setautoreset false Eg : fsutil resource setautoreset true d:\\ |
0x4000278F | 用法 : fsutil resource setlog size 例如 : fsutil resource setlog size 50 d:\\foobar |
Usage : fsutil resource setlog size Eg : fsutil resource setlog size 50 d:\\foobar |
0x40002790 | 用法 : fsutil resource setlog mode full fsutil resource setlog mode undo 例如 : fsutil resource setlog mode full d:\\foobar |
Usage : fsutil resource setlog mode full fsutil resource setlog mode undo Eg : fsutil resource setlog mode full d:\\foobar |
0x40002791 | 用法 : fsutil resource setlog extentsize 例如 : fsutil resource setlog extentsize 50 d:\\foobar |
Usage : fsutil resource setlog extentsize Eg : fsutil resource setlog extentsize 50 d:\\foobar |
0x40002792 | 用法 : fsutil resource setlog rename 例如 : fsutil resource setlog rename d:\\foobar |
Usage : fsutil resource setlog rename Eg : fsutil resource setlog rename d:\\foobar |
0x40002793 | 用法: fsutil resource setlog maxextents 例如: fsutil resource setlog maxextents 50 d:\\foobar |
Usage : fsutil resource setlog maxextents Eg : fsutil resource setlog maxextents 50 d:\\foobar |
0x40002794 | 用法: fsutil resource setlog minextents 例如: fsutil resource setlog minextents 5 d:\\foobar |
Usage : fsutil resource setlog minextents Eg : fsutil resource setlog minextents 5 d:\\foobar |
0x40002795 | 用法: fsutil resource setlog growth containers fsutil resource setlog growth percent 例如: fsutil resource setlog growth 5 containers d:\\foobar |
Usage : fsutil resource setlog growth containers fsutil resource setlog growth percent Eg : fsutil resource setlog growth 5 containers d:\\foobar |
0x40002796 | 用法 : fsutil resource setlog shrink 示例 : fsutil resource setlog shrink 10 d:\\foobar |
Usage : fsutil resource setlog shrink Eg : fsutil resource setlog shrink 10 d:\\foobar |
0x40002797 | 操作成功完成。 |
The operation completed successfully. |
0x40002798 | dwOutcome: %1!s!dwIsolationLevel: %2!s!dwIsolationFlags: %3!s!dwTimeout: %4!s! |
dwOutcome: %1!s!dwIsolationLevel: %2!s!dwIsolationFlags: %3!s!dwTimeout: %4!s! |
0x40002799 | 所有者: %1!s! |
Owner: %1!s! |
0x4000279A | 文件数: %1!s! |
Number of Files: %1!s! |
0x4000279B | %1!s! 没有被事务锁定。 |
%1!s! is not being locked by a transaction. |
0x4000279C | %1!s! 被名为 %2!s! 的事务锁定。 |
%1!s! is being locked by a transaction called %2!s!. |
0x4000279D | RM 无法从 RM 内重置。 请更改为 RM 外部的目录,然后重试。 |
An RM cannot be reset from within the RM. Please change to a directoryoutside the RM and try again. |
0x4000279E | 无法在 RM 运行时完成该操作。请关闭 RM 并重试。 |
This operation cannot be completed while the RM is running.Please shutdown the RM and try again. |
0x4000279F | 无法清除 RM 内的一个或多个文件,因为它们正在被其他应用程序使用。 |
One or more files within the RM could not be cleaned because they are in useby another application. |
0x400027A0 | 无法清除 RM 内的一个或多个文件,因为该进程没有访问那些文件的权限。 |
One or more files within the RM could not be cleaned because this processdoes not have access to those files. |
0x400027A1 | 没有清除该 RM 内的所有文件。 |
Not all of the files within this RM have been cleaned. |
0x400027A2 | 尝试清除该 RM 时,出现未知错误。 |
An unknown error occurred while attempting to clean this RM. |
0x400027A3 | Resource Manager 标识符: %1!s! |
Resource Manager Identifier : %1!s! |
0x400027A4 | RM 的 KTM 日志路径: %1!s! |
KTM Log Path for RM: %1!s! |
0x400027A5 | TOPS 使用的空间: %1!s! MbTOPS 可用空间: %2!s!%% |
Space used by TOPS: %1!s! MbTOPS free space: %2!s!%% |
0x400027A6 | 正在运行的事务: %1!s!单相提交: %2!s!两相提交: %3!s!系统已启动回退: %4!s! |
Running transactions: %1!s!One phase commits: %2!s!Two phase commits: %3!s!System initiated rollbacks: %4!s! |
0x400027A7 | 最旧事务存在时间: %1!s! |
Age of oldest transaction: %1!s! |
0x400027A8 | 记录模式: 完全 |
Logging Mode: Full |
0x400027A9 | 记录模式: 简单 |
Logging Mode: Simple |
0x400027AA | 容器数量: %1!s!容器大小: %2!s! Mb总日志容量: %3!s! Mb空闲日志总空间: %4!s! Mb |
Number of containers: %1!s!Container size: %2!s! MbTotal log capacity: %3!s! MbTotal free log space: %4!s! Mb |
0x400027AB | 最大容器数: 无限制 |
Maximum containers: No Limit |
0x400027AC | 最大容器数: %1!s! |
Maximum containers: %1!s! |
0x400027AD | 最小容器数: 无限制 |
Minimum containers: No Limit |
0x400027AE | 最小容器数: %1!s! |
Minimum containers: %1!s! |
0x400027AF | 记录增长增量: %1!s!%% |
Log growth increment: %1!s!%% |
0x400027B0 | 日志增长增量: %1!s! 容器 |
Log growth increment: %1!s! container(s) |
0x400027B1 | 自动收缩: 未启用 |
Auto shrink: Not enabled |
0x400027B2 | 自动收缩: %1!s!%% |
Auto shrink: %1!s!%% |
0x400027B3 | 现在的日志大小: %1!s! 容器。 |
Log size is now: %1!s! container(s). |
0x400027B4 | 用法 : fsutil file createnew 例如 : fsutil file createnew C:\\testfile.txt 1000 |
Usage : fsutil file createnew Eg : fsutil file createnew C:\\testfile.txt 1000 |
0x400027B5 | Formerly MSG_USAGE_QUERYFILEID |
Formerly MSG_USAGE_QUERYFILEID |
0x400027B6 | Formerl MSG_USAGE_QUERYFILENAMEBYID |
Formerl MSG_USAGE_QUERYFILENAMEBYID |
0x400027B7 | FSUTIL 工具要求你有系统管理权限。 |
The FSUTIL utility requires that you have administrative privileges. |
0x400027B8 | 用法 : fsutil hardlink create 例如 : fsutil hardlink create c:\\foo.txt c:\\bar.txt |
Usage : fsutil hardlink create Eg : fsutil hardlink create c:\\foo.txt c:\\bar.txt |
0x400027B9 | 为 %1!s! %2!s! 创建了硬链接 |
Hardlink created for %1!s! %2!s! |
0x400027BA | Formerly MSG_USAGE_HARDLINK_LIST |
Formerly MSG_USAGE_HARDLINK_LIST |
0x400027BB | 已创建文件 %1!s! |
File %1!s! is created |
0x400027BC | Formerly MSG_QUERYFILEID_SUCCEEDED |
Formerly MSG_QUERYFILEID_SUCCEEDED |
0x400027BD | Formerly MSG_QUERYFILENAMEBYID_SUCCEEDED |
Formerly MSG_QUERYFILENAMEBYID_SUCCEEDED |
0x400027BE | 默认配额值 |
Default quota values |
0x400027BF | SID 名 = %1!s!\\%2!s! (用户) |
SID Name = %1!s!\\%2!s! (User) |
0x400027C0 | SID 名 = %1!s!\\%2!s! (组) |
SID Name = %1!s!\\%2!s! (Group) |
0x400027C1 | SID 名 = %1!s!\\%2!s! (域) |
SID Name = %1!s!\\%2!s! (Domain) |
0x400027C2 | SID 名 = %1!s!\\%2!s! (别名) |
SID Name = %1!s!\\%2!s! (Alias) |
0x400027C3 | SID 名 = %1!s!\\%2!s! (已知组) |
SID Name = %1!s!\\%2!s! (WellKnownGroup) |
0x400027C4 | SID 名 = %1!s!\\%2!s! (已删除帐户) |
SID Name = %1!s!\\%2!s! (DeletedAccount) |
0x400027C5 | SID 名 = %1!s!\\%2!s! (无效) |
SID Name = %1!s!\\%2!s! (Invalid) |
0x400027C6 | SID 名 = %1!s!\\%2!s! (未知) |
SID Name = %1!s!\\%2!s! (Unknown) |
0x400027C7 | 更改时间 = %1!s!所用配额 = %2配额阈值 = %3配额限制 = %4 |
Change time = %1!s!Quota Used = %2Quota Threshold = %3Quota Limit = %4 |
0x400027C8 | 用法 : fsutil quota query 例如 : fsutil quota query C: |
Usage : fsutil quota query Eg : fsutil quota query C: |
0x400027C9 | 用法 : fsutil quota modify 例如 : fsutil quota modify c: 3000 5000 domain\\user |
Usage : fsutil quota modify Eg : fsutil quota modify c: 3000 5000 domain\\user |
0x400027CA | 用法 : fsutil quota violations例如 : fsutil quota violations |
Usage : fsutil quota violations Eg : fsutil quota violations |
0x400027CB | FileSystemControlFlags = 0x%1!08x! |
FileSystemControlFlags = 0x%1!08x! |
0x400027CC | 这个卷上已禁用配额 |
Quotas are disabled on this volume |
0x400027CD | 这个卷上跟踪并强制配额 |
Quotas are tracked and enforced on this volume |
0x400027CE | 这个卷上跟踪配额 |
Quotas are tracked on this volume |
0x400027CF | 为配额限制启用记录 |
Logging enable for quota limits |
0x400027D0 | 为配额阈值启用记录 |
Logging enable for quota thresholds |
0x400027D1 | 为配额限制和阈值启用记录 |
Logging enable for quota limits and threshold |
0x400027D2 | 没有启用配额事件记录 |
Logging for quota events is not enabled |
0x400027D3 | 配额值不完整 |
The quota values are incomplete |
0x400027D4 | 配额值是最新的 |
The quota values are up to date |
0x400027D5 | 默认配额阈值 = 0x%1默认配额限制 = 0x%2 |
Default Quota Threshold = 0x%1Default Quota Limit = 0x%2 |
0x400027D6 | 卷 %1!s! 上的配额没有启用 |
Quotas are not enabled on volume %1!s! |
0x400027D7 | 卷 - %1!s! 已标为有问题 |
Volume - %1!s! is now marked dirty |
0x400027D8 | 有效数据长度已更改 |
Valid data length is changed |
0x400027D9 | 零数据已更改 |
Zero data is changed |
0x400027DA | 没有找到文件 |
No files were found |
0x400027DB | 该文件被设为稀疏 |
This file is set as sparse |
0x400027DC | 该文件没有设为稀疏 |
This file is NOT set as sparse |
0x400027DD | 用法 : fsutil sparse queryflag 例如 : fsutil sparse queryflag C:\\Temp\\sample.txt |
Usage : fsutil sparse queryflag Eg : fsutil sparse queryflag C:\\Temp\\sample.txt |
0x400027DE | 用法 : fsutil sparse setrange 例如 : fsutil sparse setrange C:\\Temp\\sample.txt 65536 131072 |
Usage : fsutil sparse setrange Eg : fsutil sparse setrange C:\\Temp\\sample.txt 65536 131072 |
0x400027DF | 用法 : fsutil sparse queryrange 例如 : fsutil sparse queryrange C:\\Temp\\sample.txt |
Usage : fsutil sparse queryrange Eg : fsutil sparse queryrange C:\\Temp\\sample.txt |
0x400027E0 | 指定的文件不是稀疏文件 |
The specified file is NOT sparse |
0x400027E1 | 分配的范围[%1!d!]: 偏移: 0x%2!-8I64x! 长度: 0x%3!I64x! |
Allocated range[%1!d!]: Offset: 0x%2!-8I64x! Length: 0x%3!I64x! |
0x400027E2 | 指定的文件没有对象 id |
The specified file has no object id |
0x400027E3 | 新链接和现有文件必须在同一个卷上。 |
The new link and the existing file must be on the same volume. |
0x400027E4 | 用法 : fsutil quota disable 例如 : fsutil quota disable C: |
Usage : fsutil quota disable Eg : fsutil quota disable C: |
0x400027E5 | 用法 : fsutil quota track 例如 : fsutil quota track C: |
Usage : fsutil quota track Eg : fsutil quota track C: |
0x400027E6 | 用法 : fsutil quota enforce 例如 : fsutil quota enforce C: |
Usage : fsutil quota enforce Eg : fsutil quota enforce C: |
0x400027E7 | %1 是无效参数。 |
%1 is an invalid parameter. |
0x400027E8 | 用法 : fsutil fsinfo drives |
Usage : fsutil fsinfo drives |
0x400027E9 | FSUTIL 实用工具需要一个本地卷才能执行此操作。 |
The FSUTIL utility requires a local volume for this operation. |
0x400027EA | 指定的驱动器太长。 |
The specified drive is too long. |
0x400027EB | 指定的驱动器格式无效或不受支持。 |
The specified drive format is invalid or not supported. |
0x400027EC | 格式版本: %1!d!CSid: %2!s!LinkIndex: 0x%3!08x!.%4!08x!LinkFileNtfsID: 0x%5!08x!.%6!08x!CSFileNtfsID: 0x%7!08x!.%8!08x!CSChecksum: 0x%9!08x!.%10!08x!Checksum: 0x%11!08x!.%12!08x! |
Format version: %1!d!CSid: %2!s!LinkIndex: 0x%3!08x!.%4!08x!LinkFileNtfsID: 0x%5!08x!.%6!08x!CSFileNtfsID: 0x%7!08x!.%8!08x!CSChecksum: 0x%9!08x!.%10!08x!Checksum: 0x%11!08x!.%12!08x! |
0x400027ED | 替换名称偏移: %1!d!替换名称长度: %2!d!打印名称偏移: %3!d!打印名称长度: %4!d! |
Substitue Name offset: %1!d!Substitue Name length: %2!d!Print Name offset: %3!d!Print Name Length: %4!d! |
0x400027EE | 替换名称: %1!.*s! |
Substitute Name: %1!.*s! |
0x400027EF | 打印名称: %1!.*s! |
Print Name: %1!.*s! |
0x400027F0 | 重新分析数据长度: 0x%1!08x! |
Reparse Data Length: 0x%1!08x! |
0x400027F1 | 供应商 ID: %1!s!限定符: 0x%2!08x!版本: 0x%3!08x!全局标志: 0x%4!08x!数字数据项目: %5!d!文件 ID: %6!s!数据:标志: 0x%7!08x!迁移时间: %8!s!HSM ID: %9!s!包 ID: %10!s!文件开始: 0x%11!08x!.%12!08x!文件大小: 0x%13!08x!.%14!08x!数据开始: 0x%15!08x!.%16!08x!数据大小: 0x%17!08x!.%18!08x!文件版本: 0x%19!08x!.%20!08x!验证数据: 0x%21!08x!.%22!08x!验证类型: %23!u!撤回计数: %24!u!撤回时间: %25!s!数据流开始: 0x%26!08x!.%27!08x!数据流大小: 0x%28!08x!.%29!08x!数据流: %30!u!数据流 CRC 类型: %31!u!数据流 CRC: 0x%32!08x!.%3!08x! |
Vendor ID: %1!s!Qualifier: 0x%2!08x!Version: 0x%3!08x!Global Flags: 0x%4!08x!Num Data Entries: %5!d!File ID: %6!s!Data:Flags: 0x%7!08x!Migration Time: %8!s!HSM ID: %9!s!Bag ID: %10!s!File Start: 0x%11!08x!.%12!08x!File Size: 0x%13!08x!.%14!08x!Data Start: 0x%15!08x!.%16!08x!Data Size: 0x%17!08x!.%18!08x!File Version: 0x%19!08x!.%20!08x!Verification Data: 0x%21!08x!.%22!08x!Verification Type: %23!u!Recall Count: %24!u!Recall Time: %25!s!Data Stream Start: 0x%26!08x!.%27!08x!Data Stream Size: 0x%28!08x!.%29!08x!Data Stream: %30!u!Data Stream CRC Type: %31!u!Data Stream CRC: 0x%32!08x!.%3!08x! |
0x400027F2 | ---- 支持的 REPAIR 命令 ----enumerate 枚举卷的损坏日志项initiate 启动文件修复query 查询卷的自愈状态set 设置卷的自愈状态state 查询卷的损坏状态wait 等待修复完成 |
---- REPAIR Commands Supported ----enumerate Enumerate the entries of a volume's corruption loginitiate Initiate the repair of a filequery Query the self healing state of the volumeset Set the self healing state of the volumestate Query the corruption state of the volume(s)wait Wait for repair(s) to complete |
0x400027F3 | 用法 : fsutil repair query 例如 : fsutil repair query C: |
Usage : fsutil repair query Eg : fsutil repair query C: |
0x400027F4 | 用法: fsutil repair set 标志: 1 - 启用常规修复 8 - 警告潜在的数据丢失 例如 : fsutil repair set C: 1 fsutil repair set C: 9 |
Usage : fsutil repair set flags: 1 - enable general repair 8 - warn about potential data loss Eg : fsutil repair set C: 1 fsutil repair set C: 9 |
0x400027F5 | 用法 : fsutil repair wait [] WaitType: 0 表示等待所有修复(与不指定一样) WaitType: 1 表示等待当前修复 例如 : fsutil repair wait C: fsutil repair wait C: 1 |
Usage : fsutil repair wait [] WaitType: 0 to wait for all repairs (same as not specified) WaitType: 1 to wait for the current repair Eg : fsutil repair wait C: fsutil repair wait C: 1 |
0x400027F6 | 用法 : fsutil repair enumerate [] LogName: $Corrupt - 卷中确认的损坏集合 (如果未指定 LogName,则使用默认值) LogName: $Verify - 卷中的潜在、未验证的损坏集合 示例: fsutil repair enumerate C: fsutil repair enumerate C: $Corrupt fsutil repair enumerate C: $Verify |
Usage : fsutil repair enumerate [] LogName: $Corrupt - The set of confirmed corruptions in the volume (default value if LogName is not specified) LogName: $Verify - A set of potential, unverified corruptions in the volume Eg : fsutil repair enumerate C: fsutil repair enumerate C: $Corrupt fsutil repair enumerate C: $Verify |
0x400027F7 | 现在已为卷 %1!s! 禁用自愈 |
Self healing is now disabled for volume %1!s! |
0x400027F8 | 找不到损坏记录。 |
No corruption records were found. |
0x400027FB | 已为卷 %1!s! 禁用自愈 |
Self healing is disabled for volume %1!s! |
0x400027FD | 卷 %1!s! 的当前修复已完成 |
Current repair is completed for volume %1!s! |
0x400027FE | 卷 %1!s! 的所有修复已完成 |
All repairs are completed for volume %1!s! |
0x400027FF | 标记值: IIS 缓存的重新解析点 |
Tag value: IIS Caching Reparse Point |
0x40002800 | 本地文件路径 : %1!.*s!远程文件路径 : %2!.*s! |
Local File Path : %1!.*s!Remote File Path : %2!.*s! |
0x40002801 | 已不再使用,但不希望对消息 ID 进行移位 |
No longer in use but do not want to shift the message ids |
0x40002802 | 用法 : fsutil repair truncatelog 例如 : fsutil repair truncatelog C: |
Usage : fsutil repair truncatelog Eg : fsutil repair truncatelog C: |
0x40002803 | 正在截断卷 %1!s! 的自疗修复日志。 |
Self healing repair log is now being truncated for volume %1!s! |
0x40002804 | 用法 : fsutil repair initiate file ref# : 文件引用包括文件的段号。 例如 : fsutil repair initiate C: 0x001600000000123D |
Usage : fsutil repair initiate file ref# : File Reference including segment number of the file. Eg : fsutil repair initiate C: 0x001600000000123D |
0x40002805 | 已为文件引用 0x%1!s! 启动修复 |
Initiated the repair for file reference 0x%1!s! |
0x40002806 | 重新解析缓冲区中的数据无效! |
The data in the reparse buffer is invalid! |
0x40002807 | 已启用本地到本地符号链接。 |
Local to local symbolic links are enabled. |
0x40002808 | 已启用本地到远程符号链接。 |
Local to remote symbolic links are enabled. |
0x40002809 | 已启用远程到本地符号链接。 |
Remote to local symbolic links are enabled. |
0x4000280A | 已启用远程到远程符号链接。 |
Remote to remote symbolic links are enabled. |
0x4000280B | 已禁用本地到本地符号链接。 |
Local to local symbolic links are disabled. |
0x4000280C | 已禁用本地到远程符号链接。 |
Local to remote symbolic links are disabled. |
0x4000280D | 已禁用远程到本地符号链接。 |
Remote to local symbolic links are disabled. |
0x4000280E | 已禁用远程到远程符号链接。 |
Remote to remote symbolic links are disabled. |
0x4000280F | Formally MSG_SYMLINK_USING_GP_KEY |
Formally MSG_SYMLINK_USING_GP_KEY |
0x40002810 | Formerly MSG_SHORT_NAME_USING_GP_KEY |
Formerly MSG_SHORT_NAME_USING_GP_KEY |
0x40002811 | RM 状态: 未启动 |
RM State: Not Started |
0x40002812 | RM 状态: 正在启动 |
RM State: Starting |
0x40002813 | RM 状态: 活动 |
RM State: Active |
0x40002814 | RM 状态: 正在关闭 |
RM State: Shutting Down |
0x40002815 | RM 状态: 无效 |
RM State: Invalid |
0x40002816 | 注意: 此 RM 将在其下一次启动时重置其元数据。 |
NOTE: This RM will reset its metadata the next time it starts. |
0x40002817 | 用法: fsutil repair set 有效值: 0 - 禁用常规修复。 1 - 启用常规修复。 9 - 启用修复和警告潜在的数据丢失。 0x10 - 第一次损坏之后禁用修复和错误检查。 必须在启用 BugCheckOnCorrupt 模式并重启后 才可以设置此选项。 启用: fsutil behavior set BugcheckOnCorrupt 1 示例: fsutil repair set C: 0 fsutil repair set C: 1 fsutil repair set C: 9 fsutil repair set C: 0x10 |
Usage : fsutil repair set Valid Values: 0 - Disable general repair. 1 - Enable general repair. 9 - Enable repair and warn about potential data loss. 0x10 - Disable repair and bugcheck once on first corruption. Before this option can be set you must enable BugCheckOnCorrupt mode and then reboot. To enable: fsutil behavior set BugcheckOnCorrupt 1 Eg: fsutil repair set C: 0 fsutil repair set C: 1 fsutil repair set C: 9 fsutil repair set C: 0x10 |
0x40002818 | %1!s! 上的自愈状态已更改为: 0x%2!x! 值: 0x1 - 启用常规修复。 0x9 - 启用修复并警告潜在的数据丢失。 0x10 - 第一次损坏之后禁用修复和错误检查。 |
Self healing state on %1!s! has been changed to: 0x%2!x! Values: 0x1 - Enable general repair. 0x9 - Enable repair and warn about potential data loss. 0x10 - Disable repair and bugcheck once on first corruption. |
0x40002819 | %1!s! 上的自愈状态为: 0x%2!x! 值: 0x1 - 启用常规修复。 0x9 - 启用修复并警告潜在的数据丢失。 0x10 - 第一次损坏之后禁用修复和错误检查。 |
Self healing state on %1!s! is: 0x%2!x! Values: 0x1 - Enable general repair. 0x9 - Enable repair and warn about potential data loss. 0x10 - Disable repair and bugcheck once on first corruption. |
0x4000281A | 用法: fsutil behavior query AllowExtCharBugcheckOnCorruptDisable8dot3 []DisableCompressionDisableCompressionLimitDisableDeleteNotify [NTFS|ReFS]DisableEncryptionDisableFileMetadataOptimizationDisableLastAccessDisableSpotCorruptionHandlingEncryptPagingFileMemoryUsageMftZoneQuotaNotifySymlinkEvaluationDisableWriteAutoTiering []DisableTxf []如需详细信息,请使用 \"fsutil 8dot3name query /?\"。对于 DisableDeleteNotify,如果 \"NTFS\" 和 \"ReFS\" 都未指定,则会同时显示两个值。 |
Usage : fsutil behavior query AllowExtCharBugcheckOnCorruptDisable8dot3 []DisableCompressionDisableCompressionLimitDisableDeleteNotify [NTFS|ReFS]DisableEncryptionDisableFileMetadataOptimizationDisableLastAccessDisableSpotCorruptionHandlingEncryptPagingFileMemoryUsageMftZoneQuotaNotifySymlinkEvaluationDisableWriteAutoTiering []DisableTxf []Please use \"fsutil 8dot3name query /?\" for more information.For DisableDeleteNotify if neither \"NTFS\" nor \"ReFS\" is specified, both values are shown. |
0x4000281B | 用法: fsutil behavior set AllowExtChar 1 | 0BugcheckOnCorrupt 1 | 0Disable8dot3 [0 到 3] | [ 1 | 0]DisableCompression 1 | 0DisableCompressionLimit 1 | 0DisableDeleteNotify [NTFS|ReFS] 1 | 0DisableEncryption 1 | 0DisableFileMetadataOptimization 0 到 3DisableLastAccess 1 | 0DisableSpotCorruptionHandling 1 | 0EncryptPagingFile 1 | 0MemoryUsage 1 到 2MftZone 1 到 %1!u! (此值乘以 200 MB)QuotaNotify 1 到 4294967295 秒SymlinkEvaluation {L2L|L2R|R2R|R2L}:{0|1} [...]DisableWriteAutoTiering [ 1 | 0]DisableTxf [ 1 | 0]上述某些选项需要重新启动计算机才能生效。请使用 \"fsutil 8dot3name set /?\" 了解有关如何修改卷或系统的短名称行为的详细信息。对于 DisableDeleteNotify,如果 \"NTFS\" 和 \"ReFS\" 都未指定,则会采用 \"NTFS\"。MftZone 是用于使 MFT 保持连续的磁盘保留区域。200 MB 乘法仅适用于大于 1.5 GB 的卷。在此阈值下,乘法基于卷大小缩放。示例 SymlinkEvaluation 命令: \"fsutil behavior set SymlinkEvaluation L2L:1 L2R:0\" - 将启用本地到本地的符号链接,并禁用本地到 远程的符号链接。将不会更改远程到 远程链接或远程到本地链接的状态。 - 此操作将立即生效(无需重新启动) |
Usage : fsutil behavior set AllowExtChar 1 | 0BugcheckOnCorrupt 1 | 0Disable8dot3 [0 through 3] | [ 1 | 0]DisableCompression 1 | 0DisableCompressionLimit 1 | 0DisableDeleteNotify [NTFS|ReFS] 1 | 0DisableEncryption 1 | 0DisableFileMetadataOptimization 0 through 3DisableLastAccess 1 | 0DisableSpotCorruptionHandling 1 | 0EncryptPagingFile 1 | 0MemoryUsage 1 through 2MftZone 1 through %1!u! (this value multipled by 200 MB)QuotaNotify 1 through 4294967295 secondsSymlinkEvaluation {L2L|L2R|R2R|R2L}:{0|1} [...]DisableWriteAutoTiering [ 1 | 0]DisableTxf [ 1 | 0]Some of these options require a reboot to take effect.Please use \"fsutil 8dot3name set /?\" for more information on modifying theshortname behavior of the volume or system.For DisableDeleteNotify if neither \"NTFS\" nor \"ReFS\" is specified, \"NTFS\" is assumed.MftZone is a reserved region of the disk used to make the MFT contiguous. The200 MB multiplier is only applicable for volumes 1.5 GB. Below this thresholdthe multiplier is scaled based on volume size.Sample SymlinkEvaluation command: \"fsutil behavior set SymlinkEvaluation L2L:1 L2R:0\" - Will enable local to local symbolic links and disable local to remote symbolic links. It will not change the state of remote to remote links or remote to local links. - This operation takes effect immediately (no reboot required) |
0x4000281C | 用法 : set [0 through 3] | [ 1 | 0]如果未指定卷,则操作将更新注册表值: 0 - 在系统的所有卷上启用 8dot3 名称创建 1 - 在系统的所有卷上禁用 8dot3 名称创建 2 - 按卷设置 8dot3 名称创建 3 - 在所有卷(系统卷除外)上禁用 8dot3 名称创建 如果指定了卷,则操作会更新单个卷的磁盘上的标记。仅在将 注册表值设置为 2 时该操作才有意义。 0 - 启用此卷上的 8dot3 名称创建 1 - 禁用此卷上的 8dot3 名称创建此操作会立即生效(无需重新启动)。示例命令: \"fsutil 8dot3name set 1\" - disable 8dot3 name creation on all volumes \"fsutil 8dot3name set C: 1\" - disable 8dot3 name creation on c: |
usage : set [0 through 3] | [ 1 | 0]When a volume is not specified the operation updates the registry value: 0 - Enable 8dot3 name creation on all volumes on the system 1 - Disable 8dot3 name creation on all volumes on the system 2 - Set 8dot3 name creation on a per volume basis 3 - Disable 8dot3 name creation on all volumes except the system volume When a volume is specified the operation updates the individual volume's on disk flag. This operation is only meaningful if the registry value is set to 2. 0 - Enable 8dot3 name creation on this volume 1 - Disable 8dot3 name creation on this volumeThis operation takes effect immediately (no reboot required).Sample commands: \"fsutil 8dot3name set 1\" - disable 8dot3 name creation on all volumes \"fsutil 8dot3name set C: 1\" - disable 8dot3 name creation on c: |
0x4000281D | 用法: fsutil resource setconsistent 例如: fsutil resource setconsistent d_\\foobar 注意: 要使对此设置进行的更改生效,必须重新启动 RM。 |
Usage : fsutil resource setconsistent Eg : fsutil resource setconsistent d:\\foobarNOTE: The RM must be restarted for a change to this setting to take effect. |
0x4000281E | 用法: fsutil resource setavailable 例如: fsutil resource setavailable d_\\foobar 注意: 为使此设置生效必须重新启动 RM。 |
Usage : fsutil resource setavailable Eg : fsutil resource setavailable d:\\foobarNOTE: The RM must be restarted for a change to this setting to take effect. |
0x4000281F | RM 的一致性优先于可用性。 |
RM prefers consistency over availability. |
0x40002820 | RM 的可用性优先于一致性。 |
RM prefers availability over consistency. |
0x40002822 | 卷状态为: 1 (8dot3 名称创建被禁用)。 |
The volume state is: 1 (8dot3 name creation is disabled). |
0x40002823 | 卷状态为: 0 (8dot3 名称创建已启用)。 |
The volume state is: 0 (8dot3 name creation is enabled). |
0x40002824 | 注册表状态为: 0 (启用所有卷上的 8dot3 名称创建)。 |
The registry state is: 0 (Enable 8dot3 name creation on all volumes). |
0x40002825 | 注册表状态为: 1 (禁用所有卷上的 8dot3 名称创建)。 |
The registry state is: 1 (Disable 8dot3 name creation on all volumes). |
0x40002826 | 注册表状态为: 2 (按卷设置 - 默认值)。 |
The registry state is: 2 (Per volume setting - the default). |
0x40002827 | 注册表状态为: 3 (在所有非系统卷上禁用 8dot3 名称创建)。 |
The registry state is: 3 (Disable 8dot3 name creation on all non-system volumes). |
0x40002828 | 基于以上的两个设置,在 %1 上启用 8dot3 名称创建 |
Based on the above two settings, 8dot3 name creation is enabled on %1 |
0x40002829 | 基于以上的两个设置,在 %1 上禁用 8dot3 名称创建 |
Based on the above two settings, 8dot3 name creation is disabled on %1 |
0x4000282A | 基于以上的两个设置,在 %1 (系统卷)上启用 8dot3 名称创建。 |
Based on the above two settings, 8dot3 name creation is enabled on %1 (System volume). |
0x4000282B | 基于以上的两个设置,在 %1 (非系统卷)上禁用 8dot3 名称创建。 |
Based on the above two settings, 8dot3 name creation is disabled on %1 (Non-system volume). |
0x4000282C | 只有有权限的用户才能执行此操作。 |
Only privileged users can perform this operation. |
0x4000282D | 注册表数据 注册表项路径------------------------------------------------------------------------------- ------------------------------------------ |
Registry Data Registry Key Path------------------------------------------------------------------------------- ------------------------------------------ |
0x4000282E | %1!-80ws! HKCU\\%2 |
%1!-80ws! HKCU\\%2 |
0x4000282F | %1!-80ws! HKU\\%2 |
%1!-80ws! HKU\\%2 |
0x40002830 | %1!-80ws! HKCR\\%2 |
%1!-80ws! HKCR\\%2 |
0x40002831 | %1!-80ws! HKLM\\%2 |
%1!-80ws! HKLM\\%2 |
0x40002832 | %1!-80ws! HKCC\\%2 |
%1!-80ws! HKCC\\%2 |
0x40002833 | %1!-80ws! HKPD\\%2 |
%1!-80ws! HKPD\\%2 |
0x40002834 | 受影响的注册表项总数: %1!10d! |
Total affected registry keys: %1!10d! |
0x40002835 | 扫描的文件和目录总数: %1!10d!发现的 8dot3 名称总数: %2!10d!除去的 8dot3 名称总数: %3!10d! |
Total files and directories scanned: %1!10d!Total 8dot3 names found: %2!10d!Total 8dot3 names stripped: %3!10d! |
0x40002836 | 8dot3 名称 字段 完整路径------------- ------------------- ------------------------------------------------------------------------------------- |
8dot3 Name FileId Full Path------------- ------------------- ------------------------------------------------------------------------------------- |
0x40002837 | %1!-15.15ws! 0x%2!-16.16ws! “%3” |
%1!-15.15ws! 0x%2!-16.16ws! \"%3\" |
0x40002838 | 从 “%2”删除以下短名称时出错: %1!8x! %3 |
Error removing short name from \"%2\": %1!8x! %3 |
0x40002839 | 访问 “%2”时出错: %1!8x! %3 |
Error accessing \"%2\": %1!8x! %3 |
0x4000283A | 写入日志时出错。该操作已被中止。 |
Error writing to the log. This operation has been aborted. |
0x4000283B | 目录路径过长。 |
The directory path is too long. |
0x4000283C | 操作失败,原因是注册表项引用了指定路径中的8dot3 名称。请查看以下日志,获取有关受影响的注册表项的详细信息: “%1” |
The operation failed because registry entries refer to 8dot3 names in thespecified path.For details on the affected registry keys please see the log: \"%1\" |
0x4000283D | 有关所执行的操作的详细信息,请查看以下日志: “%1” |
For details on the operations performed please see the log: \"%1\" |
0x4000283E | 请输入有效目录。 |
Please input a valid directory. |
0x4000283F | 禁止除去系统卷上的 8dot3 名称。 |
Stripping 8dot3 names on the system volume is not allowed. |
0x40002840 | 创建日志文件时出错。 |
Error creating the log file. |
0x40002841 | 分析卷时出错。 |
Error parsing the volume. |
0x40002842 | 将不会除去那些名称长于最长路径的文件。 |
Stripping will not be performed on files with names longer than the maximum path length. |
0x40002843 | 将不会扫描某些注册表项,原因是其名称过长。 |
Some registry keys will not be scanned because their names are too long. |
0x40002844 | 正在扫描注册表... |
Scanning registry... |
0x40002845 | 正在扫描 8dot3 名称... |
Scanning 8dot3 names... |
0x40002846 | 正在去除 8dot3 名称... |
Stripping 8dot3 names... |
0x40002847 | 创建默认日志文件时出错。请输入fsutil 8dot3name strip /? 了解如何指定日志文件名。 |
Error creating the default log file. Please enterfsutil 8dot3name strip /? to learn how tospecify a log file name. |
0x40002848 | 分析目标路径时出错。 |
Error parsing the target directory. |
0x40002849 | 由于出现错误,未完成去除命令。 |
Due to an error, the strip command did not complete. |
0x4000284A | 无法打开目标目录。 |
Could not open the target directory. |
0x4000284B | 注册表配置单元无效。 |
Invalid registry hive. |
0x4000284C | 支持硬链接 |
Supports Hard Links |
0x4000284D | 支持扩展属性 |
Supports Extended Attributes |
0x4000284E | 支持按文件 ID 打开 |
Supports Open By FileID |
0x4000284F | %1 = %2!I64u! |
%1 = %2!I64u! |
0x40002850 | 警告: 你将要删除系统卷上的短名称。并不推荐这样做,因为这可能会导致已安装的应用程序执行异常操作,包括无法卸载。这可能会导致需要重新安装系统。 |
Warning: You are about to strip shortnames on the system volume. This is notrecommended as it might cause unexpected behaviour of installed applicationsincluding the inability to uninstall. This may result in a system that mightneed to be reinstalled from scratch. |
0x40002851 | 用法: query []未指定卷时,会显示全局 8dot3name 状态。指定卷时,会显示卷 8dot3name 状态。示例命令: \"fsutil 8dot3name query\" \"fsutil 8dot3name query C:\" |
usage : query []When no volume is specified the global 8dot3name state is displayed.When volume is specified the volumes 8dot3name state is displayed.Sample command: \"fsutil 8dot3name query\" \"fsutil 8dot3name query C:\" |
0x40002852 | 用法: fsutil 8dot3name strip DirectoryPath此命令会永久性删除卷的 8dot3 文件名。它将会列出指向已删除的 8dot3names 的注册表项,但不会修改受影响的注册表项。将不对完全路径名长于 260 个字符的最大路径长度的文件执行名称删除操作。***警告***如果注册表项受到影响且决定使用替代开关 /f,建议备份卷,因为卷可能会导致意外的应用程序故障,包括无法卸载。 /t - 测试模式 - 指定除了实际删除文件名之外,应执行所有操作。 /s - 递归模式 - 指定还应将此操作应用于子目录。 /f - 强制模式 - 指定即使存在注册表冲突也应删除该目录。 /v - 详细模式 - 指定还应将所有记录的信息都打印到控制台。 /l - 指定要写入的日志文件。后面必须加上指向日志文件的路径。 如果未指定此选项,日志文件应为: \"%%temp%%\\8dot3_removal_log@(GMT YYYY-MM-DD HH-MM-SS).log\"示例命令: \"fsutil 8dot3name strip /l mylogfile.log /s D:\\MyData\" |
Usage : fsutil 8dot3name strip DirectoryPathThis command permanently removes 8dot3 file names from your volume. It willlist the registry keys pointing to the stripped 8dot3names but will not modifythe affected registry keys. Stripping will not be performed on files with fullpath names longer than the maximum path length of 260 characters.***WARNING***If there are affected registry keys and you decide to use the overrideswitch /f, it is recommended that you backup your volume as it may lead tounexpected application failures, including the inability to uninstall. /t - Test mode - specifies that all operations should be performed except the actual stripping of the file names. /s - Recurse mode - specifies that this operation should also be applied to subdirectories. /f - Force mode - specifies that the directory should be stripped even if there are registry conflicts. /v - Verbose mode - specifies that all information logged should also be printed out to the console. /l - Specifies a log file to write to. This must be followed by a path to the log file. If this option is not specified the log file will be: \"%%temp%%\\8dot3_removal_log@(GMT YYYY-MM-DD HH-MM-SS).log\"Sample command: \"fsutil 8dot3name strip /l mylogfile.log /s D:\\MyData\" |
0x40002853 | 注意: 对此设置的更改需要重新启动计算机才能生效。 |
NOTE: Changes to this setting require a reboot to take effect. |
0x40002854 | 支持 USN 日志 |
Supports USN Journal |
0x40002855 | 用法: fsutil volume querycluster [ ...] 示例: fsutil volume querycluster C: 50 0x2000 属性值定义: ----- ^^^^^ |||||- D = 数据属性,I=索引属性,S=系统属性,?=未知 ||||-- A = 拒绝碎片整理请求 |||--- T = TxF 系统文件 ||---- S = NTFS 系统元数据文件 |----- P = 页面文件 |
Usage : fsutil volume querycluster [ ...] Eg : fsutil volume querycluster C: 50 0x2000 Attribute Value defintions: ----- ^^^^^ |||||- D = Data Attribute, I=Index Attribute, S=System Attribute, ?=Unknown ||||-- A = Deny defrag requests |||--- T = TxF system file ||---- S = NTFS System Metadata File |----- P = Page File |
0x40002856 | 群集 0x%1!016I64x! 被 %2!s! %3!s! 使用 |
Cluster 0x%1!016I64x! used by %2!s! %3!s! |
0x40002857 | ---- 支持的 8DOT3NAME 命令 ----query 在系统上查询当前设置的短名称行为scan 扫描受影响的注册表条目set 更改控制系统上短名称行为的设置strip 删除目录中所有文件的短名称 |
---- 8DOT3NAME Commands Supported ----query Query the current setting for the shortname behaviour on the systemscan Scan for impacted registry entriesset Change the setting that controls the shortname behavior on the systemstrip Remove the shortnames for all files within a directory |
0x40002858 | 用法: fsutil file queryfileid 示例: fsutil file queryfileid C:\\testfile.txt |
Usage : fsutil file queryfileid Eg : fsutil file queryfileid C:\\testfile.txt |
0x40002859 | 用法: fsutil file queryfilenamebyid 示例: fsutil file queryfilenamebyid C:\\ 0x00040000000001bf |
Usage : fsutil file queryfilenamebyid Eg : fsutil file queryfilenamebyid C:\\ 0x00040000000001bf |
0x4000285A | 用法: fsutil hardlink list 示例: fsutil hardlink list c:\\foo.txt |
Usage : fsutil hardlink list Eg : fsutil hardlink list c:\\foo.txt |
0x4000285B | 文件 ID 为 0x%1 |
File ID is 0x%1 |
0x4000285C | 此文件的随机链接名称为 %1!s! |
A random link name to this file is %1!s! |
0x4000285D | 注意: %1 当前受组策略控制。 对此设置的更改将被组策略取代。 |
NOTE: %1 is currently controlled by group policy. Changes to this setting will be superceded by policy. |
0x4000285E | 注意: %1 当前受组策略控制。 它只能通过组策略更改。 |
NOTE: %1 is currently controlled by group policy. It can only be changed through policy. |
0x4000285F | 用法 : fsutil 8dot3name scan DirectoryPath如果从此路径中删除了短名称,此命令会扫描指定的目录路径,查找可能会受影响的注册表项。 /s - 递归模式 - 指定还应将此操作应用于子目录。 /v - 详细模式 - 指定还应将所有记录的信息打印到控制台。 /l - 指定要写入的日志文件。后面必须加上指向日志文件的路径。 如果未指定此选项,日志文件将为: \"%%temp%%\\8dot3_removal_log@(GMT YYYY-MM-DD HH-MM-SS).log\"示例命令: \"fsutil 8dot3name scan /l mylogfile.log /s D:\\MyData\" |
Usage : fsutil 8dot3name scan DirectoryPathThis command scans the specified directory path looking for registry keys thatmight be impacted if short names were stripped from this path. /s - Recurse mode - specifies that this operation should also be applied to subdirectories. /v - Verbose mode - specifies that all information logged should also be printed out to the console. /l - Specifies a log file to write to. This must be followed by a path to the log file. If this option is not specified the log file will be: \"%%temp%%\\8dot3_removal_log@(GMT YYYY-MM-DD HH-MM-SS).log\"Sample command: \"fsutil 8dot3name scan /l mylogfile.log /s D:\\MyData\" |
0x40002860 | ---- 支持的 SECURITY 命令 ----enumsds 枚举安全描述符stats 显示安全文件统计信息 |
---- SECURITY Commands Supported ----enumsds Enumerate security descriptorsstats Display security file statistics |
0x40002861 | 用法: fsutil security enumsds [options] [offset [count]] 示例: fsutil security enumsds C:此命令显示 NTFS 安全描述符流的内容。默认情况下,将显示从流开头处开始的每个安全描述符。还可以提供流中的开始字节偏移,并限制要显示的安全描述符的最大数量。选项: /bare 显示除安全描述符之外的非外部输出。 /flags 以用户可读形式描述个别标志位(如果与 /sddl 一起使用, 则无效)。 /sddl 以压缩 SDDL 形式显示安全描述符,对于 自动化处理非常有用(尤其与 /bare 一起使用时)。如果没有此 选项,安全描述符将以用户可读形式显示。 |
Usage : fsutil security enumsds [options] [offset [count]] Eg : fsutil security enumsds C:This command displays the contents of the NTFS security descriptor stream.By default every security descriptor starting from the beginning of the streamwill be displayed. You can optionally provide a starting byte offset withinthe stream, and limit the maximum number of security descriptors to display.Options: /bare Display no extraneous output other than security descriptors. /flags Describe individual flag bits in human readable form (no effect if used with /sddl). /sddl Display security descriptors in a compact SDDL form, useful for automated processing (especially with /bare). Without this option, security descriptors are displayed in a human readable form. |
0x40002862 | 用法: fsutil security stats 示例: fsutil security stats C: |
Usage : fsutil security stats Eg : fsutil security stats C: |
0x40002863 | 已在 %1!s! 上成功启用 8dot3name 生成 |
Successfully enabled 8dot3name generation on %1!s! |
0x40002864 | 已在 %1!s! 上成功禁用 8dot3name 生成 |
Successfully disabled 8dot3name generation on %1!s! |
0x40002865 | 遇到意外值。 |
An unexpected value was encountered. |
0x40002866 | 注册表状态现在为: 0 (在所有卷上启用 8dot3 名称创建)。 |
The registry state is now: 0 (Enable 8dot3 name creation on all volumes). |
0x40002867 | 注册表状态现在为: 1 (在所有卷上禁用 8dot3 名称创建)。 |
The registry state is now: 1 (Disable 8dot3 name creation on all volumes). |
0x40002868 | 注册表状态现在为: 2 (每个卷设置 - 默认值)。 |
The registry state is now: 2 (Per volume setting - the default). |
0x40002869 | 注册表状态现在为: 3 (在所有非系统卷上禁用 8dot3 名称创建)。 |
The registry state is now: 3 (Disable 8dot3 name creation on all non-system volumes). |
0x4000286A | 用法: fsutil file queryextents [/R] [ []] /R : 如果 是一个重分析点,则将其打开而不是将其目标打开 : 要查询的第一个 VCN (如果忽略,则从 VCN 0 开始) : 要查询的 VCN 的数量(如果忽略或为 0,则查询到 EOF) 示例: fsutil file queryextents C:\\Temp\\sample.txt |
Usage : fsutil file queryextents [/R] [ []] /R : If is a reparse point, open it rather than its target : First VCN to query (if omitted, start at VCN 0) : Number of VCNs to query (if omitted or 0, query until EOF) Eg : fsutil file queryextents C:\\Temp\\sample.txt |
0x4000286B | 没有与指定范围匹配的扩展。 |
No extents matching specified range. |
0x4000286C | VCN: 0x%1!-8I64x! 簇: 0x%2!-8I64x! LCN: 0x%3!I64x! |
VCN: 0x%1!-8I64x! Clusters: 0x%2!-8I64x! LCN: 0x%3!I64x! |
0x4000286D | 用法: fsutil repair state [] 示例: fsutil repair state C: |
Usage : fsutil repair state [] Eg : fsutil repair state C: |
0x4000286E | 为只读 |
Is ReadOnly |
0x4000286F | 为读写 |
Is ReadWrite |
0x40002870 | %1 = %2!u! (转换为 %3!u! MB 的区大小) |
%1 = %2!u! (translates to a zone size of %3!u! MB) |
0x40002871 | FSUTIL 实用工具需要一个本地 NTFS 卷或 ReFS 卷才能执行此操作。 |
The FSUTIL utility requires a local NTFS volume or a ReFS volume for this operation. |
0x40002872 | 偏移: 0x%1!-8I64x! 长度: 0x%2!-8I64x! 用法: %3!s! |
Offset: 0x%1!-8I64x! Length: 0x%2!-8I64x! Usage: %3!s! |
0x40002873 | 用法: fsutil file queryvaliddata [/R] [/D] /R : 如果 是一个重分析点,则将其打开而不是将其目标打开 /D : 显示详细的有效数据信息 示例: fsutil file queryvaliddata C:\\testfile.txt |
Usage : fsutil file queryvaliddata [/R] [/D] /R : If is a reparse point, open it rather than its target /D : Display detailed valid data information Eg : fsutil file queryvaliddata C:\\testfile.txt |
0x40002874 | 全局损坏状态: 0x%1!02x! - %2 |
Global Corruption State: 0x%1!02x! - %2 |
0x40002875 | 卷名: %1 (%2)损坏状态: 0x%3!02x! - %4 |
Volume Name: %1 (%2)Corruption State: 0x%3!02x! - %4 |
0x40002876 | 清理 |
Clean |
0x40002877 | 需要执行完整的 Chkdsk |
Full Chkdsk Needed |
0x40002878 | 需要进行错误修复 |
Spot Fix Needed |
0x40002879 | 需要在线扫描 |
Online Scan Needed |
0x4000287A | 需要点验证 |
Spot Verify Needed |
0x4000287B | 用法: fsutil fsinfo sectorInfo 示例: fsutil fsinfo sectorInfo C: |
Usage : fsutil fsinfo sectorInfo Eg : fsutil fsinfo sectorInfo C: |
0x4000287C | LogicalBytesPerSector : %1!d!PhysicalBytesPerSectorForAtomicity : %2!d!PhysicalBytesPerSectorForPerformance : %3!d!FileSystemEffectivePhysicalBytesPerSectorForAtomicity : %4!d!设备校准 : %5设备上的分区校准: %6 |
LogicalBytesPerSector : %1!d!PhysicalBytesPerSectorForAtomicity : %2!d!PhysicalBytesPerSectorForPerformance : %3!d!FileSystemEffectivePhysicalBytesPerSectorForAtomicity : %4!d!Device Alignment : %5Partition alignment on device : %6 |
0x4000287D | 已校准(0x%1!.3x!)%0 |
Aligned (0x%1!.3x!)%0 |
0x4000287E | 未校准(0x%1!.3x!)%0 |
Not Aligned (0x%1!.3x!)%0 |
0x4000287F | 未知%0 |
Unknown%0 |
0x40002880 | **** 当前正在运行在线扫描 **** |
**** Online Scan is currently running **** |
0x40002881 | **** 当前正在此卷上运行在线扫描 **** |
**** Online Scan is currently running on this volume **** |
0x40002882 | 卷名: %1 (%2)不需要 NTFS 日志恢复。 |
Volume Name: %1 (%2)NTFS log recovery is not required. |
0x40002883 | 已执行 NTFS 日志恢复。 |
NTFS log recovery performed. |
0x40002884 | 卷名: %1 (%2)需要 NTFS 日志恢复。 |
Volume Name: %1 (%2)NTFS log recovery is required. |
0x40002885 | 有效数据 |
Valid Data |
0x40002886 | 无效数据 |
Not Valid Data |
0x40002887 | 有效数据长度为 0x%1!I64x! (%1!I64d!) |
Valid Data Length is 0x%1!I64x! (%1!I64d!) |
0x40002888 | 支持的最小记录版本: %1!d!支持的最大记录版本: %2!d! |
Minimum record version supported : %1!d!Maximum record version supported : %2!d! |
0x40002889 | 无搜寻惩罚 |
No Seek Penalty |
0x4000288A | 执行正常搜寻 |
Performs Normal Seeks |
0x4000288B | 支持剪裁 |
Trim Supported |
0x4000288C | 不支持剪裁 |
Trim Not Supported |
0x4000288D | ---- 支持的 TIERING 命令----queryflags 显示卷的分层行为标记setflags 启用卷的分层行为标记clearflags 禁用卷的分层行为标记tierlist 列出与卷关联的存储层regionlist 列出卷的区域和相应的存储层 |
---- TIERING Commands Supported ----queryflags Display the tiering behavior flags of a volumesetflags Enable tiering behavior flags of a volumeclearflags Disable tiering behavior flags of a volumetierlist List the storage tiers associated with a volumeregionlist List the regions of a volume and their respective storage tiers |
0x4000288E | 用法: fsutil tiering queryflags 示例: fsutil tiering queryflags D: |
Usage : fsutil tiering queryflags Eg : fsutil tiering queryflags D: |
0x4000288F | -----------------标志图例:----------------- /TrNH 仅限 NTFS 和 ReFS: 对于具有分层存储的卷, 会导致禁用热读写频率收集。 |
-----------------Legend for flags:----------------- /TrNH NTFS and ReFS Only: For volumes with tiered storage, causes Heat gathering to be disabled. |
0x40002890 | 用法: fsutil tiering setflags 例如: fsutil tiering setflags C: /TrNH |
Usage : fsutil tiering setflags Eg : fsutil tiering setflags C: /TrNH |
0x40002891 | 用法: fsutil tiering clearflags 例如: fsutil tiering clearflags E: /TrNH |
Usage : fsutil tiering clearflags Eg : fsutil tiering clearflags E: /TrNH |
0x40002892 | 用法: fsutil tiering tierlist 示例: fsutil tiering tierlist X: |
Usage : fsutil tiering tierlist Eg : fsutil tiering tierlist X: |
0x40002893 | 用法: fsutil tiering regionlist 示例: fsutil tiering regionlist F: |
Usage : fsutil tiering regionlist Eg : fsutil tiering regionlist F: |
0x40002894 | *无*%0 |
*NONE*%0 |
0x40002895 | 卷“%1!s!”上的当前标记: %0 |
Current flags on volume \"%1!s!\" : %0 |
0x40002896 | 错误! 无效的分层标记: %1!s! |
Error! Invalid tiering flag: %1!s! |
0x40002897 | 错误! 重复的分层标记: %1!s! |
Error! Repeated tiering flag: %1!s! |
0x40002898 | 正在启用标记: %0 |
Enabling flags: %0 |
0x40002899 | 正在禁用标记: %0 |
Disabling flags: %0 |
0x4000289A | 此卷的总存储层数: %1!d! |
Total Number of Storage Tiers for this volume: %1!d! |
0x4000289B | 此操作返回的总存储层数: %1!d! |
Total Number of Storage Tiers returned by this operation: %1!d! |
0x4000289C | 层 # %1!d!: |
Tier # %1!d!: |
0x4000289D | 层 ID: %1!s! |
Tier ID: %1!s! |
0x4000289E | 名称: %1!s! |
Name: %1!s! |
0x4000289F | 描述: %1!s! |
Description: %1!s! |
0x400028A0 | 标志: 0x%1!08x! |
Flags: 0x%1!08x! |
0x400028A1 | 预配的容量: 0x%1!016I64x! 字节 |
Provisioned Capacity: 0x%1!016I64x! bytes |
0x400028A2 | 介质类型: %0 |
Media Type: %0 |
0x400028A3 | *未指定*%0 |
*unspecified*%0 |
0x400028A4 | HDD%0 |
HDD%0 |
0x400028A5 | SSD%0 |
SSD%0 |
0x400028A6 | NVME%0 |
NVME%0 |
0x400028A7 | NVDIMM%0 |
NVDIMM%0 |
0x400028A8 | 此卷的区域总数: %1!d! |
Total Number of Regions for this volume: %1!d! |
0x400028A9 | 此操作返回的区域总数: %1!d! |
Total Number of Regions returned by this operation: %1!d! |
0x400028AA | 区域 # %1!d!: |
Region # %1!d!: |
0x400028AB | 偏移量: 0x%1!016I64x! |
Offset: 0x%1!016I64x! |
0x400028AC | 长度: 0x%1!016I64x! |
Length: 0x%1!016I64x! |
0x400028AD | 写入范围跟踪: 已启用写入范围跟踪区块大小: %1!I64d!写入范围跟踪文件大小阈值: %2!I64d! |
Write range tracking: EnabledWrite range tracking chunk size: %1!I64d!Write range tracking file size threshold: %2!I64d! |
0x400028AE | 写入范围跟踪: 已禁用 |
Write range tracking: Disabled |
0x400028AF | 用法 : fsutil usn enablerangetracking [c= s=] 示例: fsutil usn enablerangetracking c=16384 s=67108864 C: 示例: fsutil usn enablerangetracking c=0 s=0 C: 示例: fsutil usn enablerangetracking C: |
Usage : fsutil usn enablerangetracking [c= s=] Eg : fsutil usn enablerangetracking c=16384 s=67108864 C: Eg : fsutil usn enablerangetracking c=0 s=0 C: Eg : fsutil usn enablerangetracking C: |
0x400028B1 | 用法: fsutil volume filelayout * fsutil volume filelayout fsutil volume filelayout 示例: fsutil volume filelayout C: * 示例: fsutil volume filelayout C: 5 示例: fsutil volume filelayout C: 0x00040000000001bf 示例: fsutil volume filelayout C:\\$MFT 示例: fsutil volume filelayout C:\\Windows |
Usage : fsutil volume filelayout * fsutil volume filelayout fsutil volume filelayout Eg : fsutil volume filelayout C: * Eg : fsutil volume filelayout C: 5 Eg : fsutil volume filelayout C: 0x00040000000001bf Eg : fsutil volume filelayout C:\\$MFT Eg : fsutil volume filelayout C:\\Windows |
0x400028B2 | 没有返回任何文件条目 |
No file entries returned |
0x400028B3 | ********* 文件 0x%1!016I64x! *********文件参考编号 : 0x%1!016I64x!文件属性 : 0x%2!08x!: %3!s!文件条目标志 : 0x%4!08x! |
********* File 0x%1!016I64x! *********File reference number : 0x%1!016I64x!File attributes : 0x%2!08x!: %3!s!File entry flags : 0x%4!08x! |
0x400028B4 | 不存在额外信息。 |
Extra information not present. |
0x400028B5 | 创建时间 : %1!s!上次访问时间 : %2!s!上次写入时间 : %3!s!更改时间 : %4!s! LastUsn : %5!s!OwnerId : %6!d!SecurityId : %7!d! |
Creation Time : %1!s!Last Access Time : %2!s!Last Write Time : %3!s!Change Time : %4!s!LastUsn : %5!s!OwnerId : %6!d!SecurityId : %7!d! |
0x400028B6 | 不存在文件名信息。 |
File name information not present. |
0x400028B8 | 不存在流信息。 |
Streams information not present. |
0x400028B9 | 流 : 0x%8!03x! %1!s! 属性 : 0x%2!08x!: %3!s! 标记 : 0x%4!08x!: %5!s! 大小 : %6!s! 分配的大小 : %7!s! |
Stream : 0x%8!03x! %1!s! Attributes : 0x%2!08x!: %3!s! Flags : 0x%4!08x!: %5!s! Size : %6!s! Allocated Size : %7!s! |
0x400028BA | 未知的 %1!s! 版本。应为 %2!d!,找到 %3!d!。 |
Unknown %1!s! version. Expected %2!d!, found %3!d!. |
0x400028BB | 盘区信息不存在。 |
Extent information not present. |
0x400028BC | 以未知格式返回了盘区信息。 |
Extent information was returned in an unknown format. |
0x400028BD | 盘区 : %1!s! 盘区 |
Extents : %1!s! Extents |
0x400028BE | : %1!s!: VCN: %2!s! 簇: %3!s! LCN: %4!s! |
: %1!s!: VCN: %2!s! Clusters: %3!s! LCN: %4!s! |
0x400028BF | 用法: fsutil volume allocationreport 示例: fsutil volume allocationreport C: |
Usage : fsutil volume allocationreport Eg : fsutil volume allocationreport C: |
0x400028C0 | 分配报告:簇总数 : %1!s! (%2!s! 字节)可用簇 : %3!s! (%4!s! 字节)保留簇 : %5!s! (%6!s! 字节)已分配的总量 : %7!s! 字节分配在以下项之间进行:系统文件 : 计数: %8!s!。已分配的总量: %9!s! 字节。 |
Allocation report:Total clusters : %1!s! (%2!s! bytes)Free clusters : %3!s! (%4!s! bytes)Reserved clusters : %5!s! (%6!s! bytes)Total allocated : %7!s! bytesThe allocation is split between:System files : Count: %8!s!. Total allocated: %9!s! bytes. |
0x400028C1 | %1!-24s!: 文件 ID 0x%2!016I64x!。已分配的总量: %3!s! 字节。 |
%1!-24s!: File ID 0x%2!016I64x!. Total allocated: %3!s! bytes. |
0x400028C2 | 其他系统文件 : 计数: %1!s!。已分配的总量: %2!s! 字节。 |
Other system files : Count: %1!s!. Total allocated: %2!s! bytes. |
0x400028C3 | %1!s! 文件夹下的其他系统文件: 计数 : %2!s! 已分配的总量 : %3!s! 字节。 |
Other system files under %1!s! folder: Count : %2!s! Total allocated : %3!s! bytes. |
0x400028C4 | %1!-28s!: 已分配的总量: %2!s! 字节。 文件 : 计数: %3!s!。已分配的总量: %4!s! 字节。 文件夹 : 计数: %5!s!。已分配的总量: %6!s! 字节。 |
%1!-28s!: Total allocated: %2!s! bytes. Files : Count: %3!s!. Total allocated: %4!s! bytes. Folders : Count: %5!s!. Total allocated: %6!s! bytes. |
0x400028C5 | 用户文件 : 计数: %1!s!。已分配的总量: %2!s! 字节。 |
User files : Count: %1!s!. Total allocated: %2!s! bytes. |
0x400028C6 | 用户文件夹 : 计数: %1!s!。已分配的总量: %2!s! 字节。 |
User folders : Count: %1!s!. Total allocated: %2!s! bytes. |
0x400028C7 | 默认流 : %1!s! 已分配 : %2!s! 已分配的总量 : %3!s! 字节。 命名流 : %4!s! 已分配 : %5!s! 已分配的总量 : %6!s! 字节。 本地元数据流 : %7!s! 已分配 : %8!s! 已分配的总量 : %9!s! 字节。 |
Default streams : %1!s! Allocated : %2!s! Total allocated : %3!s! bytes. Named streams : %4!s! Allocated : %5!s! Total allocated : %6!s! bytes. Local metadata streams : %7!s! Allocated : %8!s! Total allocated : %9!s! bytes. |
0x400028C8 | 这些文件中包含: |
Within these files there are: |
0x400028C9 | 这些文件夹中包含: |
Within these folders there are: |
0x400028CA | 已压缩 : %1!s! 已分配的总量 : %2!s! 字节 总大小 : %3!s! 字节。 节省量 : %4!s! %% 稀疏 : %5!s! 已分配的总量 : %6!s! 字节 总大小 : %7!s! 字节。 节省量 : %8!s! %% 已加密 : %9!s! 已分配的总量 : %10!s! 字节 具有命名流 : %11!s! 已压缩 : %12!s! 稀疏 : %13!s! 已加密 : %14!s! 未分配 : %15!s! |
Compressed : %1!s! Total allocated : %2!s! bytes Total size : %3!s! bytes. Savings : %4!s! %% Sparse : %5!s! Total allocated : %6!s! bytes Total size : %7!s! bytes. Savings : %8!s! %% Encrypted : %9!s! Total allocated : %10!s! bytes With named streams : %11!s! Compressed : %12!s! Sparse : %13!s! Encrypted : %14!s! With no allocation : %15!s! |
0x400028CB | 用法 : fsutil usn readjournal [选项]选项: minver= - 要返回的 USN_RECORD 的最低主要版本。默认值为 2。 : maxver= - 要返回的 USN_RECORD 的最高主要版本。默认值为 4。 : startusn= - 要开始从中读取 USN 日志的 USN。默认值为 0。 : csv - 以 CSV 格式打印 USN 记录。 : wait - 等待更多记录添加到 USN 日志。 : tail - 开始在 USN 日志末尾读取。如果未指定 wait,则仅仅返回。重写任何 startusn 值。 示例: fsutil usn readjournal C: : fsutil usn readjournal C: minver=2 maxver=3 startusn=88 : fsutil usn readjournal C: startusn=0xF00 : fsutil usn readjournal C: wait : fsutil usn readjournal C: wait tail : fsutil usn readjournal C: csv |
Usage : fsutil usn readjournal [options]Options : minver= - Minimum Major Version of USN_RECORD to return. Default=2. : maxver= - Maximum Major Version of USN_RECORD to return. Default=4. : startusn= - USN to start reading the USN journal from. Default=0. : csv - Print the USN records in CSV format. : wait - wait for more records to be added to the USN journal. : tail - starts reading at the end of the USN journal. If wait is not specified it will just return. Overrides any startusn value. Eg : fsutil usn readjournal C: : fsutil usn readjournal C: minver=2 maxver=3 startusn=88 : fsutil usn readjournal C: startusn=0xF00 : fsutil usn readjournal C: wait : fsutil usn readjournal C: wait tail : fsutil usn readjournal C: csv |
0x400028CC | USN 日志 ID : 0x%1!016I64x!第一个 USN : %2!I64d!下一个 USN : %3!I64d!开始 USN : %4!I64d!最低主要版本 : Supported=%5!d!, requested=%6!d!最高主要版本 : Supported=%7!d!, requested=%8!d! |
USN Journal ID : 0x%1!016I64x!First USN : %2!I64d!Next USN : %3!I64d!Start USN : %4!I64d!Min major version : Supported=%5!d!, requested=%6!d!Max major version : Supported=%7!d!, requested=%8!d! |
0x400028CD | Usn : %1!I64d!文件名 : %2!.*ws!文件名长度 : %3!d!原因 : 0x%4!08x!: %5!s!时间戳 : %6!s!文件属性 : 0x%7!08x!: %8!s!文件 ID : %9!s!父文件 ID : %10!s!源信息 : 0x%11!08x!: %12!s!安全 ID : %13!d!主要版本 : %14!hu!次要版本 : %15!hu!记录长度 : %16!u! |
Usn : %1!I64d!File name : %2!.*ws!File name length : %3!d!Reason : 0x%4!08x!: %5!s!Time stamp : %6!s!File attributes : 0x%7!08x!: %8!s!File ID : %9!s!Parent file ID : %10!s!Source info : 0x%11!08x!: %12!s!Security ID : %13!d!Major version : %14!hu!Minor version : %15!hu!Record length : %16!u! |
0x400028CE | Usn : %1!I64d!原因 : 0x%2!08x!: %3!s!文件 ID : %4!s!父文件 ID : %5!s!源信息 : 0x%6!08x!: %7!s!主要版本 : %8!hu!次要版本 : %9!hu!记录长度 : %10!u!盘区数 : %11!hu!剩余盘区 : %12!hu!盘区 : |
Usn : %1!I64d!Reason : 0x%2!08x!: %3!s!File ID : %4!s!Parent file ID : %5!s!Source info : 0x%6!08x!: %7!s!Major version : %8!hu!Minor version : %9!hu!Record length : %10!u!Number of extents : %11!hu!Remaining extents : %12!hu!Extents : |
0x400028CF | 主要版本 : %1!hu!次要版本 : %2!hu!记录长度 : %3!u! |
Major version : %1!hu!Minor version : %2!hu!Record length : %3!u! |
0x400028D0 | Usn,文件名,文件名长度,原因编号,原因,时间戳,文件属性编号,文件属性,文件 ID,父文件 ID,源信息号,源信息,安全 ID,主要版本,次要版本,记录长度,盘区数,剩余盘区,盘区,偏移量,长度 |
Usn,File name,File name length,Reason #,Reason,Time stamp,File attributes #,File attributes,File ID,Parent file ID,Source info #,Source info,Security ID,Major version,Minor version,Record length,Number of extents,Remaining extents,Extent,Offset,Length |
0x40002903 | *无* |
*NONE* |
0x40002904 | 只读 |
Read only |
0x40002905 | 隐藏 |
Hidden |
0x40002906 | 系统 |
System |
0x40002907 | 目录 |
Directory |
0x40002908 | 存档 |
Archive |
0x40002909 | 正常 |
Normal |
0x4000290A | 临时 |
Temporary |
0x4000290B | 稀疏 |
Sparse |
0x4000290C | 重分析点 |
Reparse point |
0x4000290D | 已压缩 |
Compressed |
0x4000290E | 脱机 |
Offline |
0x4000290F | 没有内容已编入索引 |
Not content indexed |
0x40002910 | 已加密 |
Encrypted |
0x40002911 | 完整性流 |
Integrity stream |
0x40002912 | 虚拟 |
Virtual |
0x40002913 | 无清理数据 |
No scrub data |
0x40002914 | 不可移动 |
Immovable |
0x40002915 | 已固定 |
Pinned |
0x40002916 | 常驻 |
Resident |
0x40002917 | 未分配簇 |
No clusters allocated |
0x40002918 | 数据覆盖 |
Data overwrite |
0x40002919 | 数据扩展 |
Data extend |
0x4000291A | 数据截断 |
Data truncation |
0x4000291B | 命名数据覆盖 |
Named data overwrite |
0x4000291C | 命名数据扩展 |
Named data extend |
0x4000291D | 命名数据截断 |
Named data truncation |
0x4000291E | 文件创建 |
File create |
0x4000291F | 文件删除 |
File delete |
0x40002920 | EA 更改 |
EA change |
0x40002921 | 安全更改 |
Security change |
0x40002922 | 重命名: 旧名称 |
Rename: old name |
0x40002923 | 重命名: 新名称 |
Rename: new name |
0x40002924 | 可索引的更改 |
Indexable change |
0x40002925 | 基本信息更改 |
Basic info change |
0x40002926 | 硬链接更改 |
Hard link change |
0x40002927 | 压缩更改 |
Compression change |
0x40002928 | 加密更改 |
Encryption change |
0x40002929 | 对象 ID 更改 |
Object ID change |
0x4000292A | 重分析点更改 |
Reparse point change |
0x4000292B | 流更改 |
Stream change |
0x4000292C | 事务处理更改 |
Transacted change |
0x4000292D | 完整性更改 |
Integrity change |
0x4000292E | 关闭 |
Close |
0x4000292F | 数据管理 |
Data management |
0x40002930 | 辅助 |
Auxiliary |
0x40002931 | 复制管理 |
Replication management |
0x40002932 | 客户端复制管理 |
Client replication management |
0x40002933 | 错误! 此操作在卷 %1 上不支持标志: %0 |
Error! Flags not supported by this operation on volume %1: %0 |
0x40002934 | ---- 支持的 WIM 命令 ----enumfiles 枚举由 WIM 支持的文件enumwims 枚举支持的 WIM 文件removewim 从支持文件中删除 WIM 文件queryfile 查询特定文件的来源 |
---- WIM Commands Supported ----enumfiles Enumerate WIM backed filesenumwims Enumerate backing WIM filesremovewim Removes a WIM from backing filesqueryfile Query the origin of a specific file |
0x40002935 | 枚举的对象: %1!I64d! |
Objects enumerated: %1!I64d! |
0x40002936 | 此文件不是 WIM 支持的文件。 |
This file is not a WIM backed file. |
0x40002937 | %1!s! 失败: |
%1!s! failed: |
0x40002938 | Wim 数据源: %1!I64d!Wim 哈希: %2!s! |
Wim DataSource: %1!I64d!Wim Hash: %2!s! |
0x40002939 | Wim 状态: 不活动 |
Wim State: NOT ACTIVE |
0x4000293A | Wim 状态: 已暂停 |
Wim State: SUSPENDED |
0x4000293B | Wim 状态: 未知 |
Wim State: UNKNOWN |
0x4000293C | Wim 状态: 可操作 |
Wim State: Operational |
0x4000293D | 用法: fsutil wim queryfile 例如: fsutil wim queryfile C:\\Windows\\Notepad.exe |
Usage : fsutil wim queryfile Eg : fsutil wim queryfile C:\\Windows\\Notepad.exe |
0x4000293E | 用法: fsutil wim enumwims 例如: fsutil wim enumwims C: |
Usage : fsutil wim enumwims Eg : fsutil wim enumwims C: |
0x4000293F | 用法: fsutil wim enumfiles 例如: fsutil wim enumfiles C: 0 |
Usage : fsutil wim enumfiles Eg : fsutil wim enumfiles C: 0 |
0x40002940 | 用法: fsutil wim removewim 例如: fsutil wim removewim C: 9 |
Usage : fsutil wim removewim Eg : fsutil wim removewim C: 9 |
0x40002941 | 当文件仍然引用某个 wim 文件时,无法删除该 wim 文件。使用 \"fsutil wim enumfiles\" 可显示文件列表。 |
Cannot remove a wim while files still refer to it.Use \"fsutil wim enumfiles\" to display the list of files. |
0x40002942 | 用法: fsutil fsinfo refsInfo [标记] /r : 将 ReFS 统计信息重置为零 例如: fsutil fsinfo refsInfo C: |
Usage : fsutil fsinfo refsInfo [Flags] /r : Reset ReFS statistics to zero Eg : fsutil fsinfo refsInfo C: |
0x40002943 | REFS 卷序列号 : 0x%1REFS 版本 : %2!d!.%3!d!扇区数 : 0x%4簇总数 : 0x%5可用簇数 : 0x%6保留总数 : 0x%7每个扇区字节数 : %8!d!每个物理扇区字节数 : %10!d!每个簇字节数 : %9!d! |
REFS Volume Serial Number : 0x%1REFS Version : %2!d!.%3!d!Number Sectors : 0x%4Total Clusters : 0x%5Free Clusters : 0x%6Total Reserved : 0x%7Bytes Per Sector : %8!d!Bytes Per Physical Sector : %10!d!Bytes Per Cluster : %9!d! |
0x40002944 | FSUTIL 实用工具需要一个本地 REFS 卷才能执行此操作。 |
The FSUTIL utility requires a local REFS volume for this operation. |
0x40002945 | CHECKSUM_TYPE_NONE%0 |
CHECKSUM_TYPE_NONE%0 |
0x40002946 | CHECKSUM_TYPE_CRC32%0 |
CHECKSUM_TYPE_CRC32%0 |
0x40002947 | CHECKSUM_TYPE_CRC64%0 |
CHECKSUM_TYPE_CRC64%0 |
0x40002948 | CHECKSUM_TYPE_ECC%0 |
CHECKSUM_TYPE_ECC%0 |
0x40002949 | 校验和类型: %0 |
Checksum Type: %0 |
0x4000294A | 用法: fsutil file optimizemetadata [/A] /A : 在优化前后分析文件元数据 例如: fsutil file optimizemetadata c:\\largefragmentedfile.txt 例如: fsutil file optimizemetadata c:\\$Secure:$SDS 例如: fsutil file optimizemetadata c:\\$MFT 例如: fsutil file optimizemetadata c:\\ |
Usage: fsutil file optimizemetadata [/A] /A : Analyze file metadata before and after optimization Eg: fsutil file optimizemetadata c:\\largefragmentedfile.txt Eg: fsutil file optimizemetadata c:\\$Secure:$SDS Eg: fsutil file optimizemetadata c:\\$MFT Eg: fsutil file optimizemetadata c:\\ |
0x4000294B | 用法: fsutil file queryoptimizemetadata 例如: fsutil file queryoptimizemetadata c:\\largefragmentedfile.txt 例如: fsutil file optimizemetadata c:\\$Secure:$SDS 例如: fsutil file optimizemetadata c:\\$MFT 例如: fsutil file optimizemetadata c:\\ |
Usage: fsutil file queryoptimizemetadata Eg: fsutil file queryoptimizemetadata c:\\largefragmentedfile.txt Eg: fsutil file optimizemetadata c:\\$Secure:$SDS Eg: fsutil file optimizemetadata c:\\$MFT Eg: fsutil file optimizemetadata c:\\ |
0x4000294C | 文件元数据优化 : 无 |
File metadata optimization : None |
0x4000294D | 文件元数据优化 : 正在进行 |
File metadata optimization : In progress |
0x4000294E | 文件元数据优化 : 挂起 |
File metadata optimization : Pending |
0x4000294F | 文件元数据优化 : 未知(%1!d!) |
File metadata optimization : Unknown (%1!d!) |
0x40002950 | 属性列表大小 : %1!d! (%1!#x!)所用的文件元数据空间 : %2!d! (%2!#x!)分配的文件元数据空间 : %3!d! (%3!#x!)文件元数据空间使用量 : %4!d!%%文件记录计数 : %5!d!常驻属性数 : %6!d!非常驻属性数 : %7!d!属性总数 : %8!d!总的活动文件元数据优化数 : %9!d!总的挂起文件元数据优化数 : %10!d! |
Attribute list size : %1!d! (%1!#x!)File metadata space used : %2!d! (%2!#x!)File metadata space allocated : %3!d! (%3!#x!)File metadata space usage : %4!d!%%File records count(s) : %5!d!Number of resident attribute(s) : %6!d!Number of nonresident attribute(s) : %7!d!Total number of attributes : %8!d!Total active file metadata optimization(s) : %9!d!Total pending file metadata optimization(s) : %10!d! |
0x40002951 | 文件元数据优化已完成。 |
File metadata optimization completed. |
0x40002952 | 之前 之后属性列表大小 : %1!d! (%1!#x!) %9!*d! (%10!#x!)所用的文件元数据空间 : %2!d! (%2!#x!) %11!*d! (%12!#x!)分配的文件元数据空间 : %3!d! (%3!#x!) %13!*d! (%14!#x!)文件元数据空间使用量 : %4!d!%% %15!*d!%%文件记录计数 : %5!-7d! %16!d!常驻属性数 : %6!-7d! %17!d!非常驻属性数 : %7!-7d! %18!d!属性总数 : %8!-7d! %19!d!总的活动文件元数据优化数 : --- %20!d!总的挂起文件元数据优化数 : --- %21!d! |
Before AfterAttribute list size : %1!d! (%1!#x!) %9!*d! (%10!#x!)File metadata space used : %2!d! (%2!#x!) %11!*d! (%12!#x!)File metadata space allocated : %3!d! (%3!#x!) %13!*d! (%14!#x!)File metadata space usage : %4!d!%% %15!*d!%%File records count(s) : %5!-7d! %16!d!Number of resident attribute(s) : %6!-7d! %17!d!Number of nonresident attribute(s) : %7!-7d! %18!d!Total number of attributes : %8!-7d! %19!d!Total active file metadata optimization(s) : --- %20!d!Total pending file metadata optimization(s) : --- %21!d! |
0x40002953 | 用法: fsutil behavior query DisableFileMetadataOptimization |
Usage: fsutil behavior query DisableFileMetadataOptimization |
0x40002954 | 用法: fsutil behavior set DisableFileMetadataOptimization |
Usage: fsutil behavior set DisableFileMetadataOptimization |
0x40002955 | 值: 0x0 - 启用所有文件元数据优化 0x1 - 只禁用完整文件元数据优化 0x2 - 只禁用增量文件元数据优化 0x3 - 禁用所有文件元数据优化 |
Values: 0x0 - Enable all file metadata optimization 0x1 - Disable full file metadata optimization only 0x2 - Disable incremental file metadata optimization only 0x3 - Disable all file metadata optimization |
0x40002956 | VCN: 0x%1!-8I64x! 簇: 0x%2!-8I64x! LCN: 0x%3!I64x! 全部: 0x%4!-8I64x! Pop: 0x%5!-8I64x! 错误: 0x%6!-8I64x! |
VCN: 0x%1!-8I64x! Clusters: 0x%2!-8I64x! LCN: 0x%3!I64x! All: 0x%4!-8I64x! Pop: 0x%5!-8I64x! Err: 0x%6!-8I64x! |
0x40002957 | 读取缓存总计 已分配: %1!-8I64u! (0x%1!-8I64x!) 已填充: %2!-8I64u! (0x%2!-8I64x!) 有错误: %3!-8I64u! (0x%3!-8I64x!) |
Read Cache Totals Allocated : %1!-8I64u! (0x%1!-8I64x!) Populated : %2!-8I64u! (0x%2!-8I64x!) In Error : %3!-8I64u! (0x%3!-8I64x!) |
0x40002958 | 缓存大小(以字节为单位): 0x%1已分配的缓存(以字节为单位): 0x%2已填充的缓存(以字节为单位): 0x%3有错误的缓存字节: 0x%4缓存分配大小(以字节为单位): %5!d!总缓存区块: %6!d!可用缓存区块: %7!d!有错误的缓存区块: %8!d!未完成的缓存事务: %9!d!未完成的最大缓存事务: %10!d!缓存区块分配: %11!d!缓存无效: %12!d!无效字节: 0x%13缓存区块初始写入: %14!d!初始写入(以字节为单位): 0x%15缓存区块更新: %16!d!缓存更新(以字节为单位) 0x%17缓存读取越界(以字节为单位): 0x%18缓存命中: %19!d!从缓存中读取的字节: 0x%20缓存未命中: %21!d!为未命中读取的字节: 0x%22缓存命中百分比率: %23!d!元数据大小(以字节为单位): 0x%24写入的元数据字节: 0x%25 |
Cache size in bytes : 0x%1Cache allocated in bytes : 0x%2Cache populated in bytes : 0x%3Cache bytes in error : 0x%4Cache allocation size in bytes : %5!d!Total cache blocks : %6!d!Cache blocks free : %7!d!Cache blocks in error : %8!d!Cache transactions outstanding : %9!d!Max Cache tx outstanding : %10!d!Cache block allocations : %11!d!Cache invalidations : %12!d!Invalidations in bytes : 0x%13Cache block initial writes : %14!d!Initial writes in bytes : 0x%15Cache block updates : %16!d!Cache updates in bytes : 0x%17Cache over reads in bytes : 0x%18Cache hits : %19!d!Bytes read from cache : 0x%20Cache misses : %21!d!Bytes read for misses : 0x%22Cache hit rate as percentage : %23!d!Metadata size in bytes : 0x%24Metadata bytes written : 0x%25 |
0x40002959 | 标志: 0x%1!08x! 无搜寻惩罚 |
Flags: 0x%1!08x! No Seek Penalty |
0x4000295A | 标志: 0x%1!08x! 读取缓存 |
Flags: 0x%1!08x! Read Cache |
0x4000295B | 此卷的容器旋转处于活动状态。 |
This volume has container rotation active. |
0x4000295C | 卷状态为: 1 (写入自动分层已禁用)。 |
The volume state is: 1 (write auto tiering is disabled). |
0x4000295D | 卷状态为: 0 (写入自动分层已启用)。 |
The volume state is: 0 (write auto tiering is enabled). |
0x4000295E | ---- 支持的写入自动分层命令 ----query 在卷上查询写入自动分层行为的当前设置set 在卷上更改用于控制写入自动分层行为的设置用法: fsutil behavior query DisableWriteAutoTiering fsutil behavior set DisableWriteAutoTiering 示例: fsutil behavior query DisableWriteAutoTiering C: fsutil behavior set DisableWriteAutoTiering C: 1 |
---- Write Auto Tiering Commands Supported ----query Query the current setting for the write auto tiering behaviour on the volumeset Change the setting that controls the write auto tiering behavior on the volumeUsage: fsutil behavior query DisableWriteAutoTiering fsutil behavior set DisableWriteAutoTiering Eg: fsutil behavior query DisableWriteAutoTiering C: fsutil behavior set DisableWriteAutoTiering C: 1 |
0x4000295F | 可用字节总数 : %1字节总数 : %2提供的可用字节总数 : %3元数据字节总数 : %4 |
Total # of free bytes : %1Total # of bytes : %2Total # of avail free bytes : %3Total # of metadata bytes : %4 |
0x40002960 | MftReads : %1MftReadBytes : %2MftWrites : %3MftWriteBytes : %4Mft2Writes : %5Mft2WriteBytes : %6RootIndexReads : %7RootIndexReadBytes : %8RootIndexWrites : %9RootIndexWriteBytes : %10BitmapReads : %11BitmapReadBytes : %12BitmapWrites : %13BitmapWriteBytes : %14MftBitmapReads : %15MftBitmapReadBytes : %16MftBitmapWrites : %17MftBitmapWriteBytes : %18UserIndexReads : %19UserIndexReadBytes : %20UserIndexWrites : %21UserIndexWriteBytes : %22LogFileReads : %23LogFileReadBytes : %24LogFileWrites : %25LogFileWriteBytes : %26LogFileFull : %27DiskResourceFailure : %28VolumeTrimCount : %29AvgVolumeTrimTime (ms) : %30AvgVolumeTrimSize (KB) : %31AvgVolumeTrimSpeed (KB/s) : %32VolumeTrimSkippedCount : %33VolumeTrimSkippedSize (KB) : %34FileLevelTrimCount : %35AvgFileLevelTrimTime (ms) : %36AvgFileLevelTrimSize (KB) : %37AvgFileLevelTrimSpeed (KB/s) : %38 |
MftReads : %1MftReadBytes : %2MftWrites : %3MftWriteBytes : %4Mft2Writes : %5Mft2WriteBytes : %6RootIndexReads : %7RootIndexReadBytes : %8RootIndexWrites : %9RootIndexWriteBytes : %10BitmapReads : %11BitmapReadBytes : %12BitmapWrites : %13BitmapWriteBytes : %14MftBitmapReads : %15MftBitmapReadBytes : %16MftBitmapWrites : %17MftBitmapWriteBytes : %18UserIndexReads : %19UserIndexReadBytes : %20UserIndexWrites : %21UserIndexWriteBytes : %22LogFileReads : %23LogFileReadBytes : %24LogFileWrites : %25LogFileWriteBytes : %26LogFileFull : %27DiskResourceFailure : %28VolumeTrimCount : %29AvgVolumeTrimTime (ms) : %30AvgVolumeTrimSize (KB) : %31AvgVolumeTrimSpeed (KB/s) : %32VolumeTrimSkippedCount : %33VolumeTrimSkippedSize (KB) : %34FileLevelTrimCount : %35AvgFileLevelTrimTime (ms) : %36AvgFileLevelTrimSize (KB) : %37AvgFileLevelTrimSpeed (KB/s) : %38 |
0x40002961 | 文件系统类型: REFS |
File System Type : REFS |
0x40002962 | 文件系统类型: ExFAT |
File System Type : ExFAT |
0x40002963 | 文件系统类型: 未知 |
File System Type : UNKNOWN |
0x40002964 | FSUTIL 实用工具需要一个本地 NTFS/ReFS/FAT/FAT32/ExFAT 卷才能执行此操作。 |
The FSUTIL utility requires a local NTFS/ReFS/FAT/FAT32/ExFAT volume for this operation. |
0x40002966 | 是 DAX 卷 |
Is DAX volume |
0x40002968 | 支持 DAX |
DAX capable |
0x40002969 | 不支持 DAX |
Not DAX capable |
0x4000296A | 已成功在 %1!s! 上禁用 TxF |
Successfully disabled TxF on %1!s! |
0x4000296B | 已成功在 %1!s! 上启用 TxF |
Successfully enabled TxF on %1!s! |
0x4000296C | 卷状态为: 1 (TxF 已禁用)。 |
The volume state is: 1 (TxF is disabled). |
0x4000296D | 卷状态为: 0 (TxF 已启用)。 |
The volume state is: 0 (TxF is enabled). |
0x4000296E | 用法: set 1 | 0该操作将更新单个卷在磁盘上的标志。 0 - 在此卷上启用 TxF 1 - 在此卷上禁用 TxF此操作将立即生效(无需重新启动)。示例命令: \"fsutil behavior set DisableTxf C: 1\" - 在 c: 上禁用 TxF |
usage : set 1 | 0The operation updates the individual volume's on disk flag. 0 - Enable TxF on this volume 1 - Disable TxF on this volumeThis operation takes effect immediately (no reboot required).Sample commands: \"fsutil behavior set DisableTxf C: 1\" - disable TxF on c: |
0x4000296F | 用法: query 显示卷的 txf 状态。示例命令: \"fsutil behavior query DisableTxf C:\" |
usage : query Volumes txf state is displayed.Sample command: \"fsutil behavior query DisableTxf C:\" |
0x40002970 | 支持完整性流 |
Supports Integrity Streams |
0x40002971 | 支持块克隆 |
Supports Block Cloning |
0x40002972 | 支持稀疏 VDL |
Supports Sparse VDL |
0x40002973 | 支持文件 Ghosting |
Supports File Ghosting |
0x40002974 | 用法: fsutil file seteof 例如: fsutil file seteof C:\\testfile.txt 1000 |
Usage : fsutil file seteof Eg : fsutil file seteof C:\\testfile.txt 1000 |
0x40002975 | 文件 %1!s! eof 设置 |
File %1!s! eof set |
0x40002976 | 用法: fsutil volume list |
Usage : fsutil volume list |
0x40002977 | 可能的卷和当前装入点是: |
Possible volumes and current mount points are: |
0x40002978 | 流信息数据不存在。 |
Stream information data not present. |
0x40002979 | DSC : 媒体类型: %1!s! : 标志: 0x%2!08x!: %3!s! |
DSC : Media Type: %1!s! : Flags: 0x%2!08x!: %3!s! |
0x4000297A | 所需存储类更改 |
Desired Storage Class change |
0x4000297B | 未指定%0 |
Unspecified%0 |
0x4000297C | 容量%0 |
Capacity%0 |
0x4000297D | 性能%0 |
Performance%0 |
0x40002980 | 叠瓦式磁盘%0 |
Shingled Disk%0 |
0x40002981 | 混合读取已优化%0 |
Mixed Read Optimized%0 |
0x40002982 | 最慢%0 |
Slowest%0 |
0x40002983 | 最快%0 |
Fastest%0 |
0x40002984 | 强制 |
Mandatory |
0x40002985 | 最大 |
Maximum |
0x40002986 | 最小 |
Minimum |
0x40002987 | 可以提升 |
Can be promoted |
0x40002988 | 可以降级 |
Can be demoted |
0x40002989 | 从父级继承 |
Inherited from parent |
0x4000298A | 从卷继承 |
Inherited from volume |
0x4000298B | 已分析信息 |
Has Parsed Information |
0x4000298C | 链接(ParentID: 名称) : 0x%1!016I64x!: %2!-13s!: %3!s! |
Link (ParentID: Name) : 0x%1!016I64x!: %2!-13s!: %3!s! |
0x4000298D | DOS 名称 |
DOS Name |
0x4000298E | NTFS 名称 |
NTFS Name |
0x4000298F | HLINK 名称 |
HLINK Name |
0x40002990 | 返回句柄关闭结果信息 |
Returns Handle Close Result Information |
0x40002991 | 流最佳写入大小: 0x%1!x!流粒度大小: 0x%2!x!最小流 ID: 0x%3!x!最大流 ID: 0x%4!x! |
Stream Optimal Write Size : 0x%1!x!Stream Granularity Size : 0x%2!x!Minimum Stream ID : 0x%3!x!Maximum Stream ID : 0x%4!x! |
0x40002992 | VCN: 0x%1!-8I64x! 集群: 0x%2!-8I64x! LCN: 0x%3!-8I64x! 参考: 0x%4!-5x! 全部: 0x%5!-8I64x! Pop: 0x%6!-8I64x! 错误: 0x%7!-8I64x! |
VCN: 0x%1!-8I64x! Clusters: 0x%2!-8I64x! LCN: 0x%3!-8I64x! Ref: 0x%4!-5x! All: 0x%5!-8I64x! Pop: 0x%6!-8I64x! Err: 0x%7!-8I64x! |
0x40002993 | VCN: 0x%1!-8I64x! 集群: 0x%2!-8I64x! LCN: 0x%3!-8I64x! 参考: 0x%4!-5x! |
VCN: 0x%1!-8I64x! Clusters: 0x%2!-8I64x! LCN: 0x%3!-8I64x! Ref: 0x%4!-5x! |
0x40002994 | 用法 : fsutil file queryextentsandrefcounts [/R] [ []] /R: 如果 是一个重新分析点,则打开它而不是打开其目标 : 要查询的第一个 VCN (如果忽略,则从 VCN 0 开始) : 要查询的 VCN 的数量(如果忽略或为 0,则查询到 EOF) 示例: fsutil file queryextentsandrefcounts C:\\Temp\\sample.txt |
Usage : fsutil file queryextentsandrefcounts [/R] [ []] /R : If is a reparse point, open it rather than its target : First VCN to query (if omitted, start at VCN 0) : Number of VCNs to query (if omitted or 0, query until EOF) Eg : fsutil file queryextentsandrefcounts C:\\Temp\\sample.txt |
0x40002995 | 然而,该卷不支持 TxF。 |
However, the volume does not support TxF. |
0x40002996 | 然而,DAX 卷不支持 TxF。 |
However, being a DAX volume TxF is not supported. |
0x40002997 | 用法: fsutil volume querynumainfo 示例: fsutil volume querynumainfo c: |
Usage : fsutil volume querynumainfo Eg : fsutil volume querynumainfo c: |
0x40002998 | 给定的卷位于 Numa 节点: %1!d! |
The given volume is in Numa node: %1!d! |
0x40002999 | NTFS+DOS 名称 |
NTFS+DOS Name |