| 0x66 | 查找 iSCSI 永久绑定卷时发生错误 %1。 |
Error %1 while searching for iSCSI persistently bound volumes. |
| 0x67 | 等待 iSCSI 永久绑定卷时超时。如果存在使用存储在这些卷上的信息的任何服务或应用程序，那么它们可能无法启动或者可能报告错误。 |
Timeout waiting for iSCSI persistently bound volumes. If there are any services or applications that use information stored on these volumes then they may not start or may report errors. |
| 0x68 | 尝试联机动态磁盘 %2 时发生错误 %1。 |
Error %1 trying to online dynamic disk %2. |
| 0x69 | 尝试初始化对 Windows IPSEC 服务的访问时发生错误 %1。 |
Error %1 trying to initialize access to Windows IPSEC services. |
| 0x6A | 在检查点 %2 初始化 iSCSI 发起程序服务时发生错误 %1。 |
Error %1 while initializing iSCSI initiator service at checkpoint %2. |
| 0x6B | 初始化发起程序的共享机密时发生错误 %1。 |
Error %1 initializing initiator shared secret. |
| 0x6C | 状态 %1 确定设备接口 %2 不支持 iSCSI WMI 接口。如果该设备不是 iSCSI HBA，则可以忽略该错误。 |
Status %1 determining that device interface %2 does not support iSCSI WMI interfaces. If this device is not an iSCSI HBA then this error can be ignored. |
| 0x6D | iSCSI 发起程序传入一个 UPCALL 对象，但其格式不正确。 |
The iSCSI Initiator passed an upcall, but it was not formatted properly. |
| 0x6E | 请求 iSCSI 发起程序失败，错误代码 %1。 |
A request to the iSCSI initiator failed with error code %1. |
| 0x6F | 静态定义的目标的 iSCSI 发现失败，错误代码 %1。 |
iSCSI discovery of statically defined targets failed with error code %1. |
| 0x70 | 对 iSNS 服务器 %2 通过 Internet 存储名称服务器(iSNS)的 iSCSI 发现失败，错误代码 %1。 |
iSCSI discovery via Internet Storage Name Server (iSNS) failed with error code %1 to iSNS server %2. |
| 0x71 | 对目标门户 %2 通过 SendTargets 的 iSCSI 发现失败，错误代码 %1。 |
iSCSI discovery via SendTargets failed with error code %1 to target portal %2. |
| 0x72 | 由于来自目标的一条无效 SendTargets 文本响应，对目标门户 %2 通过 SendTargets 的 iSCSI 发现失败，错误代码 %1。 |
iSCSI discovery via SendTargets failed with error code %1 to target portal %2 due to an invalid SendTargets text response from the target. |
| 0x73 | 对主机总线适配器 %2 经由主机总线适配器的 iSCSI 发现失败，错误代码 %1。 |
iSCSI discovery via Host Bus Adapter failed with error code %1 to Host Bus Adapter %2. |
| 0x74 | %3 否决了 iSCSI 会话 %2 上设备 %1 的删除。 |
Removal of device %1 on iSCSI session %2 was vetoed by %3. |
| 0x75 | 要求 IPSEC 的配置，对目标地址 %2 配置失败，错误代码 %1。 |
Configuration of IPSEC was required, but failed with error code %1 for target address %2. |
| 0x76 | 已传入 iSCSI 发起程序服务的评估期。 |
The evaluation period for the iSCSI initiator service has passed. |
| 0x77 | iSCSI 发起程序服务不在授权应用程序的 Windows 防火墙列表中，或者当前未启用其项目。iSCSI 发起程序服务可能无法使用 iSNS 服务器维护其注册，或者被通知更改为 Internet 存储名称服务器(iSNS)服务器数据库。 |
The iSCSI initiator service is not on the Windows Firewall List of Authorized Applications or its entry is not currently enabled. The iSCSI Initiator service may not be able to maintain its registration with an iSNS Server, or be notified of changes to the Internet Storage Name Server (iSNS) Server database. |
| 0x78 | 当 iSCSI 发起程序服务尝试检查它是否位于授权应用程序的 Windows 防火墙列表上时，发生错误 %1。 |
Error %1 when the iSCSI Initiator service attempted to check whether it is on the Windows Firewall List of Authorized Applications. |
| 0x79 | 允许 Internet 存储名称服务器(iSNS)客户端功能的防火墙异常未启用。iSNS 客户端功能不可用。 |
The firewall exception to allow Internet Storage Name Server (iSNS) client functionality is not enabled. iSNS client functionality is not available. |
| 0x7A | 尝试激活 iSNS 防火墙例外规则失败。 |
Attempt to activate iSNS firewall exception rule failed. |
| 0x7B | 安装 Microsoft iSCSI 发起程序驱动程序时出错: %1。 |
Error %1 in installing Microsoft iSCSI initiator driver. |