| 2005 | 操作成功 |
The operation was successful |
| 2006 | 无法识别进行 802.1X 身份验证的用户 |
Unable to identify a user for 802.1X authentication |
| 2007 | 无法获取进行 802.1X 身份验证的识别信息 |
Unable to get the identity information for 802.1X authentication |
| 2008 | UI 对于身份验证是必需的，但是对于该 1X 端口已经禁用 |
UI is required for the authentication but UI has been disabled for this 1X port |
| 2009 | 接收到显式 EAP 失败 |
Explicit Eap failure received |
| 2010 | 身份验证程序不再存在 |
The authenticator is no longer present |
| 2011 | 不支持该版本的配置文件 |
The version of the profile is not supported |
| 2012 | 配置文件包含无效长度字段 |
The profile has an invalid length field |
| 2013 | 不允许将配置文件中的 EAP 类型用于媒体 |
The Eap type in the profile is not allowed for the media |
| 2014 | 配置文件中的 EAP 类型无效 |
The Eap type in the profile is not valid |
| 2015 | 配置文件中的 802.1X 标志无效 |
The 802.1x flags in the profile are not valid |
| 2016 | 配置文件的计时器值无效 |
The profile has an invalid timer value |
| 2017 | 配置文件中指定的请求方模式无效 |
The supplicant mode specified in the profile is not valid |
| 2018 | 配置文件中指定的身份验证模式无效 |
The auth mode specified in the profile is not valid |
| 2019 | 配置文件中指定的 EAP 连接属性无效 |
The eap connection properties specified in the profile are not valid |
| 2020 | 对等方启动 |
Peer Initiated |
| 2021 | MSM 启动 |
Msm Initiated |
| 2022 | Onex 保持状态超时 |
Onex Held State timeout |
| 2023 | Onex 身份验证超时 |
Onex Auth Timeout |
| 2024 | Onex 配置已更改 |
Onex Configuration Changed |
| 2025 | Onex 用户已更改 |
Onex User Changed |
| 2026 | 隔离状态已更改 |
Quarantine State Changed |
| 2027 | 备用凭据试用 |
Alternate Credentials Trial |
| 2028 | 无效原因码 |
Invalid Reason Code |
| 2029 | 身份验证需要 UI，但 UI 操作失败。 |
UI is required for authentication but the UI operation failed. |
| 2030 | 对 EAP 响应识别数据包没有任何响应。 |
There was no response to the EAP Response Identity packet. |
| 2031 | 身份验证失败，因为所需的 UI 操作已被用户取消 |
Authentication failed because a required UI operation was cancelled by the user |
| 2032 | 使用此配置文件保存的凭据无效 |
The credentials saved with this profile are invalid |
| 2033 | 使用此配置文件保存的凭据已过期 |
The credentials saved with this profile have expired |
| 2034 | 身份验证失败，因为无法向相应用户显示 UI |
Authentication failed because UI could not be displayed to an appropriate user |
| 0x10000001 | API |
API |
| 0x10000002 | EAP |
EAP |
| 0x10000003 | EAPPacket |
EAPPacket |
| 0x10000004 | OneXUI |
OneXUI |
| 0x10000005 | 配置文件 |
Profile |
| 0x10000006 | 语义 |
Semantic |
| 0x10000007 | 请求方 |
Supplicant |
| 0x10000008 | 用户 |
User |
| 0x10000031 | 响应时间 |
Response Time |
| 0x30000001 | 开始 |
Start |
| 0x30000002 | 停止 |
Stop |
| 0x300000B4 | 开始状态 |
Start State |
| 0x300000B5 | 结束状态 |
End State |
| 0x300000B6 | 关闭状态 |
Closed State |
| 0x300000B7 | 打开状态 |
Open State |
| 0x300000B8 | 连接状态 |
Connect State |
| 0x300000B9 | 侦听状态 |
Listen State |
| 0x300000BA | 关联状态 |
Association State |
| 0x300000BB | 身份验证状态 |
Authentication State |
| 0x300000BC | 建立的状态 |
Established State |
| 0x50000002 | 错误 |
Error |
| 0x50000003 | 警告 |
Warning |
| 0x50000004 | 信息 |
Information |
| 0x70000003 | MSM |
MSM |
| 0x70000007 | 端口 |
Port |
| 0x90000001 | Microsoft-Windows-OneX |
Microsoft-Windows-OneX |
| 0x90000002 | Microsoft-Windows-OneX/Diagnostic |
Microsoft-Windows-OneX/Diagnostic |
| 0x90000003 | Microsoft-Windows-OneX/Operational |
Microsoft-Windows-OneX/Operational |
| 0xB0000001 | OneXDestroySupplicantPort |
OneXDestroySupplicantPort |
| 0xB0000002 | OneXStartAuthentication |
OneXStartAuthentication |
| 0xB0000003 | OneXStopAuthentication |
OneXStopAuthentication |
| 0xB0000004 | 端口(%1): EAP 错误 WinError 为 %2，ReasonCode 为 %3，EapMethod(Type 为 %4)，RootCause 为 %5 |
Port(%1): EAP error WinError=%2, ReasonCode=%3, EapMethod(Type=%4), RootCause is %5 |
| 0xB0000005 | 端口(%1): 帐户被禁用并且用户未加入域。将尝试使用备用凭据配置文件进行身份验证。 |
Port(%1): Account is disabled and user is non-domain joined. Authentication will be tried with alternate credentials profile. |
| 0xB0000006 | 端口(%1): 表示 EAP 失败，错误代码为 %2，原因代码为 %3 |
Port(%1): EAP failure indication with error code %2 and reason code %3 |
| 0xB0000007 | 端口(%1): 正在保存大小为 %2 的更新的用户数据 |
Port(%1): Saving updated user data of size (%2) |
| 0xB0000008 | 端口(%1): 正在保存大小为 %2 的更新的连接数据 |
Port(%1): Saving updated connection data of size (%2) |
| 0xB0000009 | 端口(%1): 已成功接收 UI 响应 |
Port(%1): Successfully received UI Response |
| 0xB000000A | 端口(%1): EapProcessPacketValidityAndGetResult 返回操作 %2 |
Port(%1): EapProcessPacketValidityAndGetResult returned action %2 |
| 0xB000000B | 端口(%1): EAP 请求重新启动身份验证 |
Port(%1): EAP requested authentication restart |
| 0xB000000C | 端口(%3): EapHostPeerInitialize 失败，错误为 %1 |
Port(%3): EapHostPeerInitialize failed, error %1 |
| 0xB000000D | 端口(%3): EapHostPeerEndSession 失败，错误为 %1 |
Port(%3): EapHostPeerEndSession failed, error %1 |
| 0xB000000E | 端口(%3): OneXGeneratePacketEvent 失败，错误为 %1 |
Port(%3): OneXGeneratePacketEvent failed, error %1 |
| 0xB000000F | 端口(%3): OneXGeneratePeerAuthRestartedEvent 失败，错误为 %1 |
Port(%3): OneXGeneratePeerAuthRestartedEvent failed, error %1 |
| 0xB0000010 | 端口(%3): EapHostPeerGetAuthStatus 失败，错误为 %1 |
Port(%3): EapHostPeerGetAuthStatus failed, error %1 |
| 0xB0000011 | 端口(%3): MSMUIRequest 失败，错误为 %1 |
Port(%3): MSMUIRequest failed, error %1 |
| 0xB0000012 | 端口(%3): CompareSessionUserWithOwner 失败，错误为 %1 |
Port(%3): CompareSessionUserWithOwner failed, error %1 |
| 0xB0000013 | 端口(%3): ProcessEapHostTLV 失败，错误为 %1 |
Port(%3): ProcessEapHostTLV failed, error %1 |
| 0xB0000014 | 端口(%1): 无法将 UI 请求(代码为 %2)发送到 MSM，因为该端口的 UI 被禁用 |
Port(%1): Cannot send UI Request (code=%2) to MSM since UI is disabled for the port |
| 0xB0000015 | 端口(%3): 调用 WTSQueryUserToken 时发生错误 %1。建议进行计算机身份验证。 |
Port(%3): Error %1 in calling WTSQueryUserToken. Proposing machine authentication. |
| 0xB0000016 | 端口(%3): SupplicantGetUserTokenFromRuntimeState 失败，错误为 %1 |
Port(%3): SupplicantGetUserTokenFromRuntimeState failed, error %1 |
| 0xB0000017 | 端口(%1): 身份验证模式为仅用户，但找不到合适的用户 |
Port(%1): The auth mode is User only but an appropriate user can't be found |
| 0xB0000018 | 端口(%3): CompareOneXCredentials 失败，错误为 %1 |
Port(%3): CompareOneXCredentials failed, error %1 |
| 0xB0000019 | 端口(%3): 无法有条件地发送 Eapol 启动数据包。忽略错误 %1 |
Port(%3): Failed to conditionally send Eapol start packet. Ignoring error %1 |
| 0xB000001A | 端口(%3): OneXGenerateForceAuthenticatedEvent 失败，错误为 %1 |
Port(%3): OneXGenerateForceAuthenticatedEvent failed, error %1 |
| 0xB000001B | OneXValidateProfile 失败，错误为 %1，原因代码为 %3 |
OneXValidateProfile failed, error %1, reason code %3 |
| 0xB000001C | EAP dll 请求显示 UI，但该端口的 UI 不允许具有当前凭据 |
EAP dll requested to show UI, but the UI for the port is not allowed with current credentials |
| 0xB000001D | EAP 方法不支持密钥派生，因此将无法用于发现 |
The EAP method does not support key derivation and will not be used for discovery |
| 0xB000001E | EAP 方法不支持相互身份验证，因此将无法用于发现 |
The EAP method does not support mutual authentication and will not be used for discovery |
| 0xB000001F | 已完成创建发现配置文件。已创建 %1 个配置文件 |
Done with creating discovery profiles. Created %1 profiles |
| 0xB0000020 | 为 eapType=%1 和 AuthMode=%2 的发现创建了一个 1X 配置文件 |
Created a 1X profile for discovery with eapType=%1 and AuthMode=%2 |
| 0xB0000021 | 介质类型 %2 不允许 EAP 方法 %1，因此将不用于发现 |
The EAP method %1 is not allowed for media type %2 and will not be used for discovery |
| 0xB0000022 | 端口(%1): 已成功将 UI 请求(代码为 %2)发送到 MSM |
Port(%1): Successfully sent UI Request (code=%2) to MSM |
| 0xB0000023 | 收到一个会话更改事件(%1) |
Received a session change event (%1) |
| 0xB0000024 | 已完成初始化 ID 为 %1 且友好名称为 %2 的新端口 |
Finished initializing a new port with id=%1 and friendly name=%2 |
| 0xB0000025 | 端口(%1): MPPE-Send/Recv-Keys 已经由请求方派生 |
Port(%1): MPPE-Send/Recv-Keys have been derived by supplicant |
| 0xB0000026 | 端口(%1): 正在将 UI 请求(代码为 %2)发送到 MSM |
Port(%1): Sending UI Request (code=%2) to MSM |
| 0xB0000027 | 端口(%1): 正在请求 MSM 删除用户令牌的用户数据 |
Port(%1): Asking MSM to delete user data for user token |
| 0xB0000028 | 端口(%1): 收到一个 EAP 数据包，长度为 %2，类型为 %3，标识符为 %4，eapType 为 %5 |
Port(%1): Received an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
| 0xB0000029 | 端口(%1): 已发送一个 Eapol 启动数据包 |
Port(%1): Sent an Eapol start packet |
| 0xB000002A | 端口(%1): 请求方配置为不发送 Eapol 启动数据包 |
Port(%1): The supplicant is configured to not send an Eapol start packet |
| 0xB000002B | 端口(%1): 由于原因 %2，因此正在重新启动身份验证 |
Port(%1): Restarting authentication due to reason = %2 |
| 0xB000002C | 端口(%1): 正在启动身份验证 |
Port(%1): Authentication Starting |
| 0xB000002D | 端口(%1): 已完成身份验证 |
Port(%1): Authentication Completed |
| 0xB000002E | 端口(%1): 此身份验证花费的时间为 %2 毫秒 |
Port(%1): Time taken for this authentication = %2 ms |
| 0xB000002F | 端口(%1): 已标识 802.1X 用户。身份验证标识为 %2，sessionId 为 %3，username 为 %4，域为 %5 |
Port(%1): 802.1X user identified. auth identity = %2, sessionId = %3, username=%4, domain=%5 |
| 0xB0000030 | 端口(%1): 正在停止当前 802.1X 身份验证 |
Port(%1): Stopping the current 802.1X authentication |
| 0xB0000031 | 端口(%1): 正在启动新的 802.1X 身份验证(%2) |
Port(%1): Starting a new 802.1X authentication (%2) |
| 0xB0000032 | 端口(%1): 将对该配置文件使用备用凭据 |
Port(%1): Alternate credentials will be used for this profile |
| 0xB0000033 | 端口(%1): 这是正在尝试的发现配置文件 |
Port(%1): This is a discovery profile being attempted |
| 0xB0000034 | 端口(%1): 正在尝试实时配置 |
Port(%1): Trying timely configuration |
| 0xB0000035 | 端口(%1): 已成功完成 802.1X 身份验证 |
Port(%1): Completed the 802.1X authentication successfully |
| 0xB0000036 | 端口(%1): 已完成 802.1X 身份验证，因为没有找到验证器 |
Port(%1): Completed the 802.1X authentication because no authenticator was found |
| 0xB0000037 | 端口(%1): 使用 UI 响应接收的会话 ID (%2)不同于已发送请求的会话 ID (%3)。正在丢弃该响应 |
Port(%1): The session id (%2) received with the UI response is different than the session id for which the request was sent (%3). Discarding this response |
| 0xB0000038 | 端口(%1): 存在一个挂起的 UI 请求，大小为 %2，sessionId 为 %3 |
Port(%1): A pending UI request exists size=%2, sessionId=%3 |
| 0xB0000039 | 端口(%1): 建议对 sessionId=%3 (%2)进行用户身份验证 |
Port(%1): User auth proposed for sessionId=%3 (%2) |
| 0xB000003A | 端口(%1): 该计算机处于应用服务器模式。建议进行计算机身份验证 |
Port(%1): The machine is in app server mode. Proposing machine auth |
| 0xB000003B | EapHostPeerInvokeInteractiveUI 失败，错误为 %2，原因为 %3 |
EapHostPeerInvokeInteractiveUI failed, Error = %2 Reason = %3 |
| 0xB000003C | 没有要显示的 EAP 凭据字段 |
No EAP Cred fields to display |
| 0xB000003D | 凭据转换失败(错误为 %1) |
Creds conversion failed (error=%1) |
| 0xB000003E | EapHostPeerQueryInteractiveUIInputFields 失败(错误为 %1) |
EapHostPeerQueryInteractiveUIInputFields failed (error=%1) |
| 0xB000003F | 正在显示更改密码对话框 - %1 |
Displaying the change password dialog - %1 |
| 0xB0000040 | 端口(%1): 正在发送一个 EAP 数据包，长度=%2，类型=%3，标识符=%4，eapType=%5 |
Port(%1): Sending an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
| 0xB0000041 | 端口(%1): 正在 ResponseId 数据包中发送的标识为 %2 |
Port(%1): Identity being sent in the ResponseId packet is %2 |
| 0xB0000042 | 端口:(%1): 正在保存/更新用户数据的主副本%nSupplicantIsUsingExplicitCreds:(%2) |
Port:(%1): Saving/Updating master copy of user data%nSupplicantIsUsingExplicitCreds:(%2) |
| 0xB0000044 | 端口(%1): 正在从持久性存储刷新用户数据%n%nSupplicantIsUsingExplicitCreds:(%2) |
Port(%1): Flushing User Data from Persistent Store%n%nSupplicantIsUsingExplicitCreds:(%2) |
| 0xB0000046 | 端口(%1): OneX Auth 超时 |
Port(%1):OneX Auth Timeout |
| 0xB000EA61 | 错误: %1 位置: %2 上下文: %3 |
Error: %1 Location: %2 Context: %3 |
| 0xB000EA62 | 警告: %1 位置: %2 上下文: %3 |
Warning: %1 Location: %2 Context: %3 |
| 0xB000EA63 | 转换为状态: %1 上下文: %2 |
Transitioned to State: %1 Context: %2 |
| 0xB000EA64 | 更新的上下文: %1 更新原因: %2 |
Updated Context: %1 Update Reason: %2 |
| 0xB000EAC5 | SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 协议: %5 ReferenceContext: %6 |
SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6 |
| 0xB000EAC7 | 接口 GUID: %1 IfIndex: %2 接口 LUID: %3 ReferenceContext: %4 |
Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4 |
| 0xD0000001 | 无 |
None |
| 0xD0000002 | 通知 |
Notification |
| 0xD0000003 | RequestId |
RequestId |
| 0xD0000004 | 成功 |
Success |
| 0xD0000005 | 失败 |
Fail |
| 0xD0000006 | RequestOther |
RequestOther |
| 0xD0000007 | ResponseId |
ResponseId |
| 0xD0000008 | ResponseNak |
ResponseNak |
| 0xD0000009 | ResponseOther |
ResponseOther |
| 0xD000000A | PacketInvalid |
PacketInvalid |
| 0xD000000B | 控制台连接 |
Console Connect |
| 0xD000000C | 断开控制台连接 |
Console Disconnect |
| 0xD000000D | 远程连接 |
Remote Connect |
| 0xD000000E | 断开远程连接 |
Remote Disconnect |
| 0xD000000F | 会话登录 |
Session Logon |
| 0xD0000010 | 会话注销 |
Session Logoff |
| 0xD0000011 | 会话锁定 |
Session Lock |
| 0xD0000012 | 解除会话锁定 |
Session Unlock |
| 0xD0000013 | 远程控制 |
Remote Control |
| 0xD0000014 | 丢弃 |
Discard |
| 0xD0000015 | 发送 |
Send |
| 0xD0000016 | 结果 |
Result |
| 0xD0000017 | InvokeUI |
InvokeUI |
| 0xD0000018 | 响应 |
Respond |
| 0xD0000019 | StartAuthentication |
StartAuthentication |
| 0xD000001B | 已启动对等机 |
Peer Initiated |
| 0xD000001C | 已启动 MSM |
Msm Initiated |
| 0xD000001D | OneX 保持状态超时 |
OneX Held State Timeout |
| 0xD000001E | OneX 身份验证超时 |
OneX Auth Timeout |
| 0xD000001F | OneX 配置已更改 |
OneX Configuration Changed |
| 0xD0000020 | OneX 用户已更改 |
OneX User Changed |
| 0xD0000022 | 替换凭据试用 |
Alternate Creds Trial |
| 0xD0000023 | 无效 |
Invalid |
| 0xD0000024 | 用户更改 |
User change |
| 0xD0000025 | Msm 已启动 |
MSM initiated |
| 0xD0000026 | 配置更改 |
Config change |
| 0xD0000027 | PLAP 配置文件 |
PLAP profile |
| 0xD0000028 | TIMELY 配置文件 |
TIMELY profile |
| 0xD0000029 | 用户令牌已指定 |
User token specified |
| 0xD000002A | 登录用户令牌 |
Logged-on user token |