100 | - Sample string (used for unit tests only). |
- Sample string (used for unit tests only). |
501 | Windows Server upgrades are not recommended, for best results please clean install Windows Server 2016. If you must upgrade, before continuing make sure your app vendors support their applications on Windows Server 2016. Follow their specific recommendations before and after upgrade. For more information, go to http://go.microsoft.com/fwlink/?LinkId=243105. Important: If the software isn't compatible with Windows Server 2016 or if the app vendor doesn't support the app, uninstall it before you install Windows. If you don't uninstall the applications, your system won't be supported, the app might not work, and settings or other information might be lost. |
Windows Server upgrades are not recommended, for best results please clean install Windows Server 2016. If you must upgrade, before continuing make sure your app vendors support their applications on Windows Server 2016. Follow their specific recommendations before and after upgrade. For more information, go to http://go.microsoft.com/fwlink/?LinkId=243105. Important: If the software isn't compatible with Windows Server 2016 or if the app vendor doesn't support the app, uninstall it before you install Windows. If you don't uninstall the applications, your system won't be supported, the app might not work, and settings or other information might be lost. |
1001 | SETUP has determined that the volume(s) hosting the Active Directory database (NTDS.DIT) or log files lack sufficient disk space. See http://go.microsoft.com/fwlink/?LinkId=141481. |
SETUP has determined that the volume(s) hosting the Active Directory database (NTDS.DIT) or log files lack sufficient disk space. See http://go.microsoft.com/fwlink/?LinkId=141481. |
1002 | SETUP cannot determine if there is sufficient disk space for the domain controller upgrade. See http://go.microsoft.com/fwlink/?LinkId=141481. |
SETUP cannot determine if there is sufficient disk space for the domain controller upgrade. See http://go.microsoft.com/fwlink/?LinkId=141481. |
1003 | SETUP cannot determine if Windows Server 2016 ADPREP /FORESTPREP and /DOMAINPREP updates exist on this domain controller. See http://go.microsoft.com/fwlink/?LinkId=141481. |
SETUP cannot determine if Windows Server 2016 ADPREP /FORESTPREP and /DOMAINPREP updates exist on this domain controller. See http://go.microsoft.com/fwlink/?LinkId=141481. |
1004 | Active Directory on this domain controller does not contain Windows Server 2016 ADPREP /FORESTPREP updates. See http://go.microsoft.com/fwlink/?LinkId=113955. |
Active Directory on this domain controller does not contain Windows Server 2016 ADPREP /FORESTPREP updates. See http://go.microsoft.com/fwlink/?LinkId=113955. |
1005 | Active Directory on this domain controller does not contain Windows Server 2016 ADPREP /DOMAINPREP updates. See http://go.microsoft.com/fwlink/?LinkId=113955. |
Active Directory on this domain controller does not contain Windows Server 2016 ADPREP /DOMAINPREP updates. See http://go.microsoft.com/fwlink/?LinkId=113955. |
2001 | Setup has detected that BitLocker Drive Encryption is enabled on this hard disk space. Please suspend (also referred to as disable) BitLocker in the Control Panel, and then restart the installation. |
Setup has detected that BitLocker Drive Encryption is enabled on this hard disk space. Please suspend (also referred to as disable) BitLocker in the Control Panel, and then restart the installation. |
2002 | Setup was unable to determine if BitLocker Drive Encryption is in use. |
Setup was unable to determine if BitLocker Drive Encryption is in use. |
3001 | Setup has detected that Remote Installation Services is configured on your server, or Windows Deployment Services is in legacy/mixed mode. To upgrade your server, uninstall this component, or configure Windows Deployment Services to run in native mode. |
Setup has detected that Remote Installation Services is configured on your server, or Windows Deployment Services is in legacy/mixed mode. To upgrade your server, uninstall this component, or configure Windows Deployment Services to run in native mode. |
4002 | Setup has detected that Microsoft Windows Rights Management Services (RMS) version 1.0 or 1.0 with SP1 is installed on this computer. You must either upgrade to RMS 1.0 with SP2 (recommended) or uninstall RMS completely. |
Setup has detected that Microsoft Windows Rights Management Services (RMS) version 1.0 or 1.0 with SP1 is installed on this computer. You must either upgrade to RMS 1.0 with SP2 (recommended) or uninstall RMS completely. |
4003 | Setup has detected that Active Directory Rights Management Services (ADRMS) is configured on this computer using Windows Internal Database (WID). To complete the upgrade process, you must first uninstall the ADRMS server role and migrate the existing WID instance to a SQL Server instance. For more information, see http://go.microsoft.com/fwlink/?LinkID=229299. |
Setup has detected that Active Directory Rights Management Services (ADRMS) is configured on this computer using Windows Internal Database (WID). To complete the upgrade process, you must first uninstall the ADRMS server role and migrate the existing WID instance to a SQL Server instance. For more information, see http://go.microsoft.com/fwlink/?LinkID=229299. |
5001 | Setup has detected that FrontPage Server Extensions is installed on this computer. To upgrade your server, uninstall this component. |
Setup has detected that FrontPage Server Extensions is installed on this computer. To upgrade your server, uninstall this component. |
6001 | Setup has detected that Active Directory Migration Tool (ADMT) version 3.0 is installed on this computer. You must uninstall ADMT version 3.0 completely before you can upgrade this computer. |
Setup has detected that Active Directory Migration Tool (ADMT) version 3.0 is installed on this computer. You must uninstall ADMT version 3.0 completely before you can upgrade this computer. |
7001 | Setup detected that UDDI Services version 2.0 is installed on this computer. To complete the upgrade process, you must first uninstall the UDDI Services server role. See UDDI Services (http://go.microsoft.com/fwlink/?LinkID=109398) for more information. |
Setup detected that UDDI Services version 2.0 is installed on this computer. To complete the upgrade process, you must first uninstall the UDDI Services server role. See UDDI Services (http://go.microsoft.com/fwlink/?LinkID=109398) for more information. |
8001 | Setup has determined that IIS shared configuration is enabled. You must disable shared configuration to upgrade from Windows Server 2008 to Windows Server 2008 R2. For information about how to disable shared configuration, complete the upgrade, and re-enable shared configuration, see article (http://go.microsoft.com/fwlink/?LinkId=130887). |
Setup has determined that IIS shared configuration is enabled. You must disable shared configuration to upgrade from Windows Server 2008 to Windows Server 2008 R2. For information about how to disable shared configuration, complete the upgrade, and re-enable shared configuration, see article (http://go.microsoft.com/fwlink/?LinkId=130887). |
8002 | The File Replication Service (FRS) is set to replicate one or more folders on this server. The replication of these folders will fail after this server is upgraded to Windows Server 2008 R2. FRS cannot replicate any folders other than the SYSVOL (Domain System Volume) shared folder in Windows Server 2008 R2. To continue replicating folders other than the SYSVOL folder, replace the FRS replica sets with new replication groups using DFS Replication on all servers that are participating in the affected replica sets. |
The File Replication Service (FRS) is set to replicate one or more folders on this server. The replication of these folders will fail after this server is upgraded to Windows Server 2008 R2. FRS cannot replicate any folders other than the SYSVOL (Domain System Volume) shared folder in Windows Server 2008 R2. To continue replicating folders other than the SYSVOL folder, replace the FRS replica sets with new replication groups using DFS Replication on all servers that are participating in the affected replica sets. |
8003 | Setup failed to detect whether the File Replication Service (FRS) is set to replicate folders on this server. FRS cannot replicate any folders other than the SYSVOL (Domain System Volume) shared folder in Windows Server 2008 R2. To continue replicating folders other than the SYSVOL folder, replace the FRS replica sets with new replication groups using DFS Replication on all servers that are participating in the affected replica sets. |
Setup failed to detect whether the File Replication Service (FRS) is set to replicate folders on this server. FRS cannot replicate any folders other than the SYSVOL (Domain System Volume) shared folder in Windows Server 2008 R2. To continue replicating folders other than the SYSVOL folder, replace the FRS replica sets with new replication groups using DFS Replication on all servers that are participating in the affected replica sets. |
9001 | Setup encountered a problem and was unable to determine whether Hyper-V features can be upgraded. For more information about Hyper-V upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=512570. |
Setup encountered a problem and was unable to determine whether Hyper-V features can be upgraded. For more information about Hyper-V upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=512570. |
9002 | Setup has detected one or more running virtual machines. Please shut down all virtual machines, and then restart the installation. |
Setup has detected one or more running virtual machines. Please shut down all virtual machines, and then restart the installation. |
9003 | Setup has detected one or more virtual machines with a saved state. Please shut down all virtual machines, and then restart the installation. |
Setup has detected one or more virtual machines with a saved state. Please shut down all virtual machines, and then restart the installation. |
9004 | Setup has detected one or more virtual machines that have snapshots. After upgrade, if you apply a snapshot that was taken while the virtual machine was running before the upgrade, you must delete the associated saved state to start the virtual machine. |
Setup has detected one or more virtual machines that have snapshots. After upgrade, if you apply a snapshot that was taken while the virtual machine was running before the upgrade, you must delete the associated saved state to start the virtual machine. |
9005 | Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. |
Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. |
9006 | Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. Setup has detected one or more virtual machines that have snapshots. After upgrade, if you apply a snapshot that was taken while the virtual machine was running before the upgrade, you must delete the associated saved state file to start the virtual machine. |
Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. Setup has detected one or more virtual machines that have snapshots. After upgrade, if you apply a snapshot that was taken while the virtual machine was running before the upgrade, you must delete the associated saved state file to start the virtual machine. |
9007 | Setup has detected one or more running virtual machines. Please save or shut down all virtual machines, and then restart the installation. |
Setup has detected one or more running virtual machines. Please save or shut down all virtual machines, and then restart the installation. |
9008 | Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. |
Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. |
9009 | Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. |
Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. Setup has detected that one or more virtual drives are directly attached to physical devices. You might need to reconnect the virtual drives to these devices after the upgrade is complete. |
9010 | Setup has detected one or more virtual machines in a saved state with one or more virtual drives directly attached to physical devices. Please shut down these virtual machines, and then restart the installation. You might need to reconnect the virtual drives to the physical devices after the upgrade is complete. |
Setup has detected one or more virtual machines in a saved state with one or more virtual drives directly attached to physical devices. Please shut down these virtual machines, and then restart the installation. You might need to reconnect the virtual drives to the physical devices after the upgrade is complete. |
9011 | Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. Setup has detected one or more virtual machines in a saved state with one or more virtual drives directly attached to physical devices. Please shut down these virtual machines, and then restart the installation. You might need to reconnect the virtual drives to the physical devices after the upgrade is complete. |
Setup has detected one or more virtual machines which are part of a replication relationship. To avoid replication failures, upgrade the Replica server before upgrading the primary server. Once the Replica server is upgraded, any uncommitted failover operations will be committed, test failover virtual machines will be deleted, and the recovery history of the Replica virtual machines will be deleted. Setup has detected one or more virtual machines in a saved state with one or more virtual drives directly attached to physical devices. Please shut down these virtual machines, and then restart the installation. You might need to reconnect the virtual drives to the physical devices after the upgrade is complete. |
9012 | Setup has detected that the processors in this machine do not support second level address translation (SLAT). Hyper-V on Windows Server 2016 requires this capability. |
Setup has detected that the processors in this machine do not support second level address translation (SLAT). Hyper-V on Windows Server 2016 requires this capability. |
10001 | Setup encountered a problem and was unable to determine whether the Failover Clustering feature can be upgraded. For more information visit http://go.microsoft.com/fwlink/?LinkId=179355. |
Setup encountered a problem and was unable to determine whether the Failover Clustering feature can be upgraded. For more information visit http://go.microsoft.com/fwlink/?LinkId=179355. |
10002 | Setup has determined that this computer is a member of a Failover Cluster which cannot directly upgraded. In order to complete this operation it is recommended that you evict this node from the Failover Cluster and perform a clean installation. See http://go.microsoft.com/fwlink/?LinkID=178962 for more information. |
Setup has determined that this computer is a member of a Failover Cluster which cannot directly upgraded. In order to complete this operation it is recommended that you evict this node from the Failover Cluster and perform a clean installation. See http://go.microsoft.com/fwlink/?LinkID=178962 for more information. |
11002 | Active Directory Federation Services (AD FS) 2.0 was detected on this machine and will not be upgraded. After upgrade, AD FS will be installed, but will need to be reconfigured in order to continue operation. It is recommended that you back up your AD FS configuration data before proceeding with this upgrade. For full details on steps to take to upgrade your installation of AD FS 2.0, please refer to KB article at http://go.microsoft.com/fwlink/?LinkId=218228. |
Active Directory Federation Services (AD FS) 2.0 was detected on this machine and will not be upgraded. After upgrade, AD FS will be installed, but will need to be reconfigured in order to continue operation. It is recommended that you back up your AD FS configuration data before proceeding with this upgrade. For full details on steps to take to upgrade your installation of AD FS 2.0, please refer to KB article at http://go.microsoft.com/fwlink/?LinkId=218228. |
11003 | The Active Directory Federation Services (AD FS) role service is installed on this server. When the OS upgrade is complete, you will need to reinstall the role service and then reconfigure the federation service by adding the node to an existing Windows Server 2012 R2 or later AD FS farm. For more information see http://go.microsoft.com/fwlink/?LinkID=518375. |
The Active Directory Federation Services (AD FS) role service is installed on this server. When the OS upgrade is complete, you will need to reinstall the role service and then reconfigure the federation service by adding the node to an existing Windows Server 2012 R2 or later AD FS farm. For more information see http://go.microsoft.com/fwlink/?LinkID=518375. |
11004 | The Active Directory Federation Services (AD FS) proxy role service is installed on this server. When the OS upgrade is complete, you will need to install the Web Application Proxy role service on the Remote Access role and then add it to a Windows Server 2012 R2 or later AD FS farm. For more information see http://go.microsoft.com/fwlink/?LinkID=518376 |
The Active Directory Federation Services (AD FS) proxy role service is installed on this server. When the OS upgrade is complete, you will need to install the Web Application Proxy role service on the Remote Access role and then add it to a Windows Server 2012 R2 or later AD FS farm. For more information see http://go.microsoft.com/fwlink/?LinkID=518376 |
12001 | Setup has detected that a previous version of the iSCSI Target Server or iSCSI VSS/VDS storage providers are installed on this computer. They will no longer function after upgrading and all configuration settings will be lost. Follow the instructions at http://go.microsoft.com/fwlink/?LinkId=286173 prior to upgrading to ensure they will continue to function. |
Setup has detected that a previous version of the iSCSI Target Server or iSCSI VSS/VDS storage providers are installed on this computer. They will no longer function after upgrading and all configuration settings will be lost. Follow the instructions at http://go.microsoft.com/fwlink/?LinkId=286173 prior to upgrading to ensure they will continue to function. |
12002 | Due to unexpected errors, Setup was unable to determine if this upgrade is compatible with the iSCSI Target Server or its management components. Cancel Setup and retry. |
Due to unexpected errors, Setup was unable to determine if this upgrade is compatible with the iSCSI Target Server or its management components. Cancel Setup and retry. |
12003 | Setup has detected that the iSCSI Target Server SMI-S Provider for System Center Virtual Machine Manager 2012 SP1 is installed on this computer. This SMI-S provider will no longer function after upgrading and all configuration settings will be lost. Follow the instructions at http://go.microsoft.com/fwlink/?LinkId=286173 prior to upgrading to ensure the iSCSI Target Server SMI-S management will continue to function. |
Setup has detected that the iSCSI Target Server SMI-S Provider for System Center Virtual Machine Manager 2012 SP1 is installed on this computer. This SMI-S provider will no longer function after upgrading and all configuration settings will be lost. Follow the instructions at http://go.microsoft.com/fwlink/?LinkId=286173 prior to upgrading to ensure the iSCSI Target Server SMI-S management will continue to function. |
13001 | Setup has detected that at least one of Remote Desktop Session Host (RDSH), Remote Desktop Connection Broker (RDCB), Remote Desktop Virtualization Host (RDVH) and Remote Desktop Web Access (RDWA) role is installed. To upgrade your server, uninstall these components. |
Setup has detected that at least one of Remote Desktop Session Host (RDSH), Remote Desktop Connection Broker (RDCB), Remote Desktop Virtualization Host (RDVH) and Remote Desktop Web Access (RDWA) role is installed. To upgrade your server, uninstall these components. |
13002 | Setup has detected that the Telnet Server role is installed. To upgrade your system, uninstall the Telnet Server role. |
Setup has detected that the Telnet Server role is installed. To upgrade your system, uninstall the Telnet Server role. |
13003 | Setup has detected that one or more of the Identity Management for UNIX components are installed. To upgrade your server, uninstall these components. For more information about uninstalling these components, see http://go.microsoft.com/fwlink/?LinkId=518378. |
Setup has detected that one or more of the Identity Management for UNIX components are installed. To upgrade your server, uninstall these components. For more information about uninstalling these components, see http://go.microsoft.com/fwlink/?LinkId=518378. |
13004 | Plug and Play and RemoteFX USB device redirection is disabled by default in this version of Windows. You can re-enable this setting in Group Policy. |
Plug and Play and RemoteFX USB device redirection is disabled by default in this version of Windows. You can re-enable this setting in Group Policy. |
13005 | Setup has detected multiple RD Connection Brokers in the Remote Desktop Services deployment. Upgrade can only be performed in a single-broker configuration to ensure broker database consistency. To continue with the upgrade remove all other RD Connection Brokers from the HA Broker configuration and try again. |
Setup has detected multiple RD Connection Brokers in the Remote Desktop Services deployment. Upgrade can only be performed in a single-broker configuration to ensure broker database consistency. To continue with the upgrade remove all other RD Connection Brokers from the HA Broker configuration and try again. |
14001 | Setup has detected that the NPS configuration contains Network Access Protection (NAP) related settings. These settings must be removed from the configuration before upgrading to this version of Windows. A list of settings that need to be removed has been saved on the desktop to the file: NAP_settings.html. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
Setup has detected that the NPS configuration contains Network Access Protection (NAP) related settings. These settings must be removed from the configuration before upgrading to this version of Windows. A list of settings that need to be removed has been saved on the desktop to the file: NAP_settings.html. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
14002 | An error occurred during setup while determining if Network Access Protection (NAP) settings are present in the NPS configuration. Please verify that all NAP related settings have been removed from the configuration prior to performing an upgrade. For more information, see http://go.microsoft.com/fwlink/?LinkId=392909. |
An error occurred during setup while determining if Network Access Protection (NAP) settings are present in the NPS configuration. Please verify that all NAP related settings have been removed from the configuration prior to performing an upgrade. For more information, see http://go.microsoft.com/fwlink/?LinkId=392909. |
14003 | Setup has detected that the HRA role service is installed. This role service must be removed before upgrading to this version of Windows. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
Setup has detected that the HRA role service is installed. This role service must be removed before upgrading to this version of Windows. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
14004 | Setup has detected that the HCAP role service is installed. This role service must be removed before upgrading to this version of Windows. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |
Setup has detected that the HCAP role service is installed. This role service must be removed before upgrading to this version of Windows. For more information about upgrade requirements, see http://go.microsoft.com/fwlink/?LinkId=392909. |