| 2005 | The operation was successful |
The operation was successful |
| 2006 | Unable to identify a user for 802.1X authentication |
Unable to identify a user for 802.1X authentication |
| 2007 | Unable to get the identity information for 802.1X authentication |
Unable to get the identity information for 802.1X authentication |
| 2008 | UI is required for the authentication but UI has been disabled for this 1X port |
UI is required for the authentication but UI has been disabled for this 1X port |
| 2009 | Explicit Eap failure received |
Explicit Eap failure received |
| 2010 | The authenticator is no longer present |
The authenticator is no longer present |
| 2011 | The version of the profile is not supported |
The version of the profile is not supported |
| 2012 | The profile has an invalid length field |
The profile has an invalid length field |
| 2013 | The Eap type in the profile is not allowed for the media |
The Eap type in the profile is not allowed for the media |
| 2014 | The Eap type in the profile is not valid |
The Eap type in the profile is not valid |
| 2015 | The 802.1x flags in the profile are not valid |
The 802.1x flags in the profile are not valid |
| 2016 | The profile has an invalid timer value |
The profile has an invalid timer value |
| 2017 | The supplicant mode specified in the profile is not valid |
The supplicant mode specified in the profile is not valid |
| 2018 | The auth mode specified in the profile is not valid |
The auth mode specified in the profile is not valid |
| 2019 | The eap connection properties specified in the profile are not valid |
The eap connection properties specified in the profile are not valid |
| 2020 | Peer Initiated |
Peer Initiated |
| 2021 | MSM Initiated |
Msm Initiated |
| 2022 | Onex Held State timeout |
Onex Held State timeout |
| 2023 | Onex Auth Timeout |
Onex Auth Timeout |
| 2024 | Onex Configuration Changed |
Onex Configuration Changed |
| 2025 | Onex User Changed |
Onex User Changed |
| 2026 | Quarantine State Changed |
Quarantine State Changed |
| 2027 | Alternate Credentials Trial |
Alternate Credentials Trial |
| 2028 | Invalid Reason Code |
Invalid Reason Code |
| 2029 | UI is required for authentication but the UI operation failed. |
UI is required for authentication but the UI operation failed. |
| 2030 | There was no response to the EAP Response Identity packet. |
There was no response to the EAP Response Identity packet. |
| 2031 | Authentication failed because a required UI operation was cancelled by the user |
Authentication failed because a required UI operation was cancelled by the user |
| 2032 | The credentials saved with this profile are invalid |
The credentials saved with this profile are invalid |
| 2033 | The credentials saved with this profile have expired |
The credentials saved with this profile have expired |
| 2034 | Authentication failed because UI could not be displayed to an appropriate user |
Authentication failed because UI could not be displayed to an appropriate user |
| 0x10000001 | API |
API |
| 0x10000002 | EAP |
EAP |
| 0x10000003 | EAPPacket |
EAPPacket |
| 0x10000004 | OneXUI |
OneXUI |
| 0x10000005 | Profile |
Profile |
| 0x10000006 | Semantic |
Semantic |
| 0x10000007 | Supplicant |
Supplicant |
| 0x10000008 | User |
User |
| 0x10000031 | Response Time |
Response Time |
| 0x30000001 | Start |
Start |
| 0x30000002 | Stop |
Stop |
| 0x300000B4 | Start State |
Start State |
| 0x300000B5 | End State |
End State |
| 0x300000B6 | Closed State |
Closed State |
| 0x300000B7 | Open State |
Open State |
| 0x300000B8 | Connect State |
Connect State |
| 0x300000B9 | Listen State |
Listen State |
| 0x300000BA | Association State |
Association State |
| 0x300000BB | Authentication State |
Authentication State |
| 0x300000BC | Established State |
Established State |
| 0x50000002 | Error |
Error |
| 0x50000003 | Warning |
Warning |
| 0x50000004 | Information |
Information |
| 0x70000003 | MSM |
MSM |
| 0x70000007 | Port |
Port |
| 0x90000001 | Microsoft-Windows-OneX |
Microsoft-Windows-OneX |
| 0x90000002 | Microsoft-Windows-OneX/Diagnostic |
Microsoft-Windows-OneX/Diagnostic |
| 0x90000003 | Microsoft-Windows-OneX/Operational |
Microsoft-Windows-OneX/Operational |
| 0xB0000001 | OneXDestroySupplicantPort |
OneXDestroySupplicantPort |
| 0xB0000002 | OneXStartAuthentication |
OneXStartAuthentication |
| 0xB0000003 | OneXStopAuthentication |
OneXStopAuthentication |
| 0xB0000004 | Port(%1): EAP error WinError=%2, ReasonCode=%3, EapMethod(Type=%4), RootCause is %5 |
Port(%1): EAP error WinError=%2, ReasonCode=%3, EapMethod(Type=%4), RootCause is %5 |
| 0xB0000005 | Port(%1): Account is disabled and user is non-domain joined. Authentication will be tried with alternate credentials profile. |
Port(%1): Account is disabled and user is non-domain joined. Authentication will be tried with alternate credentials profile. |
| 0xB0000006 | Port(%1): EAP failure indication with error code %2 and reason code %3 |
Port(%1): EAP failure indication with error code %2 and reason code %3 |
| 0xB0000007 | Port(%1): Saving updated user data of size (%2) |
Port(%1): Saving updated user data of size (%2) |
| 0xB0000008 | Port(%1): Saving updated connection data of size (%2) |
Port(%1): Saving updated connection data of size (%2) |
| 0xB0000009 | Port(%1): Successfully received UI Response |
Port(%1): Successfully received UI Response |
| 0xB000000A | Port(%1): EapProcessPacketValidityAndGetResult returned action %2 |
Port(%1): EapProcessPacketValidityAndGetResult returned action %2 |
| 0xB000000B | Port(%1): EAP requested authentication restart |
Port(%1): EAP requested authentication restart |
| 0xB000000C | Port(%3): EapHostPeerInitialize failed, error %1 |
Port(%3): EapHostPeerInitialize failed, error %1 |
| 0xB000000D | Port(%3): EapHostPeerEndSession failed, error %1 |
Port(%3): EapHostPeerEndSession failed, error %1 |
| 0xB000000E | Port(%3): OneXGeneratePacketEvent failed, error %1 |
Port(%3): OneXGeneratePacketEvent failed, error %1 |
| 0xB000000F | Port(%3): OneXGeneratePeerAuthRestartedEvent failed, error %1 |
Port(%3): OneXGeneratePeerAuthRestartedEvent failed, error %1 |
| 0xB0000010 | Port(%3): EapHostPeerGetAuthStatus failed, error %1 |
Port(%3): EapHostPeerGetAuthStatus failed, error %1 |
| 0xB0000011 | Port(%3): MSMUIRequest failed, error %1 |
Port(%3): MSMUIRequest failed, error %1 |
| 0xB0000012 | Port(%3): CompareSessionUserWithOwner failed, error %1 |
Port(%3): CompareSessionUserWithOwner failed, error %1 |
| 0xB0000013 | Port(%3): ProcessEapHostTLV failed, error %1 |
Port(%3): ProcessEapHostTLV failed, error %1 |
| 0xB0000014 | Port(%1): Cannot send UI Request (code=%2) to MSM since UI is disabled for the port |
Port(%1): Cannot send UI Request (code=%2) to MSM since UI is disabled for the port |
| 0xB0000015 | Port(%3): Error %1 in calling WTSQueryUserToken. Proposing machine authentication. |
Port(%3): Error %1 in calling WTSQueryUserToken. Proposing machine authentication. |
| 0xB0000016 | Port(%3): SupplicantGetUserTokenFromRuntimeState failed, error %1 |
Port(%3): SupplicantGetUserTokenFromRuntimeState failed, error %1 |
| 0xB0000017 | Port(%1): The auth mode is User only but an appropriate user can't be found |
Port(%1): The auth mode is User only but an appropriate user can't be found |
| 0xB0000018 | Port(%3): CompareOneXCredentials failed, error %1 |
Port(%3): CompareOneXCredentials failed, error %1 |
| 0xB0000019 | Port(%3): Failed to conditionally send Eapol start packet. Ignoring error %1 |
Port(%3): Failed to conditionally send Eapol start packet. Ignoring error %1 |
| 0xB000001A | Port(%3): OneXGenerateForceAuthenticatedEvent failed, error %1 |
Port(%3): OneXGenerateForceAuthenticatedEvent failed, error %1 |
| 0xB000001B | OneXValidateProfile failed, error %1, reason code %3 |
OneXValidateProfile failed, error %1, reason code %3 |
| 0xB000001C | EAP dll requested to show UI, but the UI for the port is not allowed with current credentials |
EAP dll requested to show UI, but the UI for the port is not allowed with current credentials |
| 0xB000001D | The EAP method does not support key derivation and will not be used for discovery |
The EAP method does not support key derivation and will not be used for discovery |
| 0xB000001E | The EAP method does not support mutual authentication and will not be used for discovery |
The EAP method does not support mutual authentication and will not be used for discovery |
| 0xB000001F | Done with creating discovery profiles. Created %1 profiles |
Done with creating discovery profiles. Created %1 profiles |
| 0xB0000020 | Created a 1X profile for discovery with eapType=%1 and AuthMode=%2 |
Created a 1X profile for discovery with eapType=%1 and AuthMode=%2 |
| 0xB0000021 | The EAP method %1 is not allowed for media type %2 and will not be used for discovery |
The EAP method %1 is not allowed for media type %2 and will not be used for discovery |
| 0xB0000022 | Port(%1): Successfully sent UI Request (code=%2) to MSM |
Port(%1): Successfully sent UI Request (code=%2) to MSM |
| 0xB0000023 | Received a session change event (%1) |
Received a session change event (%1) |
| 0xB0000024 | Finished initialising a new port with id=%1 and friendly name=%2 |
Finished initializing a new port with id=%1 and friendly name=%2 |
| 0xB0000025 | Port(%1): MPPE-Send/Recv-Keys have been derived by supplicant |
Port(%1): MPPE-Send/Recv-Keys have been derived by supplicant |
| 0xB0000026 | Port(%1): Sending UI Request (code=%2) to MSM |
Port(%1): Sending UI Request (code=%2) to MSM |
| 0xB0000027 | Port(%1): Asking MSM to delete user data for user token |
Port(%1): Asking MSM to delete user data for user token |
| 0xB0000028 | Port(%1): Received an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
Port(%1): Received an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
| 0xB0000029 | Port(%1): Sent an Eapol start packet |
Port(%1): Sent an Eapol start packet |
| 0xB000002A | Port(%1): The supplicant is configured to not send an Eapol start packet |
Port(%1): The supplicant is configured to not send an Eapol start packet |
| 0xB000002B | Port(%1): Restarting authentication due to reason = %2 |
Port(%1): Restarting authentication due to reason = %2 |
| 0xB000002C | Port(%1): Authentication Starting |
Port(%1): Authentication Starting |
| 0xB000002D | Port(%1): Authentication Completed |
Port(%1): Authentication Completed |
| 0xB000002E | Port(%1): Time taken for this authentication = %2 ms |
Port(%1): Time taken for this authentication = %2 ms |
| 0xB000002F | Port(%1): 802.1X user identified. auth identity = %2, sessionId = %3, username=%4, domain=%5 |
Port(%1): 802.1X user identified. auth identity = %2, sessionId = %3, username=%4, domain=%5 |
| 0xB0000030 | Port(%1): Stopping the current 802.1X authentication |
Port(%1): Stopping the current 802.1X authentication |
| 0xB0000031 | Port(%1): Starting a new 802.1X authentication (%2) |
Port(%1): Starting a new 802.1X authentication (%2) |
| 0xB0000032 | Port(%1): Alternate credentials will be used for this profile |
Port(%1): Alternate credentials will be used for this profile |
| 0xB0000033 | Port(%1): This is a discovery profile being attempted |
Port(%1): This is a discovery profile being attempted |
| 0xB0000034 | Port(%1): Trying timely configuration |
Port(%1): Trying timely configuration |
| 0xB0000035 | Port(%1): Completed the 802.1X authentication successfully |
Port(%1): Completed the 802.1X authentication successfully |
| 0xB0000036 | Port(%1): Completed the 802.1X authentication because no authenticator was found |
Port(%1): Completed the 802.1X authentication because no authenticator was found |
| 0xB0000037 | Port(%1): The session ID (%2) received with the UI response is different to the session ID for which the request was sent (%3). Discarding this response |
Port(%1): The session id (%2) received with the UI response is different than the session id for which the request was sent (%3). Discarding this response |
| 0xB0000038 | Port(%1): A pending UI request exists size=%2, sessionId=%3 |
Port(%1): A pending UI request exists size=%2, sessionId=%3 |
| 0xB0000039 | Port(%1): User auth proposed for sessionId=%3 (%2) |
Port(%1): User auth proposed for sessionId=%3 (%2) |
| 0xB000003A | Port(%1): The machine is in app server mode. Proposing machine auth |
Port(%1): The machine is in app server mode. Proposing machine auth |
| 0xB000003B | EapHostPeerInvokeInteractiveUI failed, Error = %2 Reason = %3 |
EapHostPeerInvokeInteractiveUI failed, Error = %2 Reason = %3 |
| 0xB000003C | No EAP Cred fields to display |
No EAP Cred fields to display |
| 0xB000003D | Creds conversion failed (error=%1) |
Creds conversion failed (error=%1) |
| 0xB000003E | EapHostPeerQueryInteractiveUIInputFields failed (error=%1) |
EapHostPeerQueryInteractiveUIInputFields failed (error=%1) |
| 0xB000003F | Displaying the change password dialogue - %1 |
Displaying the change password dialog - %1 |
| 0xB0000040 | Port(%1): Sending an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
Port(%1): Sending an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
| 0xB0000041 | Port(%1): Identity being sent in the ResponseId packet is %2 |
Port(%1): Identity being sent in the ResponseId packet is %2 |
| 0xB0000042 | Port:(%1): Saving/Updating master copy of user data%nSupplicantIsUsingExplicitCreds:(%2) |
Port:(%1): Saving/Updating master copy of user data%nSupplicantIsUsingExplicitCreds:(%2) |
| 0xB0000044 | Port(%1): Flushing User Data from Persistent Store%n%nSupplicantIsUsingExplicitCreds:(%2) |
Port(%1): Flushing User Data from Persistent Store%n%nSupplicantIsUsingExplicitCreds:(%2) |
| 0xB0000046 | Port(%1):OneX Auth Time-out |
Port(%1):OneX Auth Timeout |
| 0xB000EA61 | Error: %1 Location: %2 Context: %3 |
Error: %1 Location: %2 Context: %3 |
| 0xB000EA62 | Warning: %1 Location: %2 Context: %3 |
Warning: %1 Location: %2 Context: %3 |
| 0xB000EA63 | Transitioned to State: %1 Context: %2 |
Transitioned to State: %1 Context: %2 |
| 0xB000EA64 | Updated Context: %1 Update Reason: %2 |
Updated Context: %1 Update Reason: %2 |
| 0xB000EAC5 | SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6 |
SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6 |
| 0xB000EAC7 | Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4 |
Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4 |
| 0xD0000001 | None |
None |
| 0xD0000002 | Notification |
Notification |
| 0xD0000003 | RequestId |
RequestId |
| 0xD0000004 | Success |
Success |
| 0xD0000005 | Fail |
Fail |
| 0xD0000006 | RequestOther |
RequestOther |
| 0xD0000007 | ResponseId |
ResponseId |
| 0xD0000008 | ResponseNak |
ResponseNak |
| 0xD0000009 | ResponseOther |
ResponseOther |
| 0xD000000A | PacketInvalid |
PacketInvalid |
| 0xD000000B | Console Connect |
Console Connect |
| 0xD000000C | Console Disconnect |
Console Disconnect |
| 0xD000000D | Remote Connect |
Remote Connect |
| 0xD000000E | Remote Disconnect |
Remote Disconnect |
| 0xD000000F | Session Logon |
Session Logon |
| 0xD0000010 | Session Logoff |
Session Logoff |
| 0xD0000011 | Session Lock |
Session Lock |
| 0xD0000012 | Session Unlock |
Session Unlock |
| 0xD0000013 | Remote Control |
Remote Control |
| 0xD0000014 | Discard |
Discard |
| 0xD0000015 | Send |
Send |
| 0xD0000016 | Result |
Result |
| 0xD0000017 | InvokeUI |
InvokeUI |
| 0xD0000018 | Respond |
Respond |
| 0xD0000019 | StartAuthentication |
StartAuthentication |
| 0xD000001D | OneX Held State Timeout |
OneX Held State Timeout |
| 0xD000001E | OneX Auth Timeout |
OneX Auth Timeout |
| 0xD000001F | OneX Configuration Changed |
OneX Configuration Changed |
| 0xD0000020 | OneX User Changed |
OneX User Changed |
| 0xD0000022 | Alternate Creds Trial |
Alternate Creds Trial |
| 0xD0000023 | Invalid |
Invalid |
| 0xD0000024 | User change |
User change |
| 0xD0000025 | MSM initiated |
MSM initiated |
| 0xD0000026 | Config change |
Config change |
| 0xD0000027 | PLAP profile |
PLAP profile |
| 0xD0000028 | TIMELY profile |
TIMELY profile |
| 0xD0000029 | User token specified |
User token specified |
| 0xD000002A | Logged-on user token |
Logged-on user token |
| 0xD000002C | Failure |
Failure |