| 0x1000002F | 处理编码器控制的事件。 |
Events dealing with the control of the encoder. |
| 0x10000030 | 处理示例处理的事件 |
Events that deal with the processing of samples |
| 0x10000031 | 响应时间 |
Response Time |
| 0x10000034 | SQM |
SQM |
| 0x30000000 | 信息 |
Info |
| 0x30000001 | 开始 |
Start |
| 0x30000002 | 停止 |
Stop |
| 0x30000009 | 发送 |
Send |
| 0x300000F0 | 接收 |
Receive |
| 0x50000005 | 详细 |
Verbose |
| 0x51000002 | 错误 |
Error |
| 0x70000001 | 编码器的配置 |
Configuration of the encoder |
| 0x70000002 | 视频编码器完成的任务 |
Task done by the video encoder |
| 0x7100002A | MPEG-2 Encode/Mux for DLNA |
MPEG-2 Encode/Mux for DLNA |
| 0x90000001 | Events from the MPEG-2 Video Encoder MFT |
Events from the MPEG-2 Video Encoder MFT |
| 0x91000001 | Microsoft-Windows-MPEG-2 Encode/Mux for DLNA |
Microsoft-Windows-MPEG-2 Encode/Mux for DLNA |
| 0xB0000000 | 到流 #%1 的输入示例(%2)已通过 MFT 提交到 MPEG-2 视频编码器。标志: %3 |
Input sample (%2) to stream #%1 submitted to MPEG-2 Video Encoder through the MFT. Flags: %3 |
| 0xB0000001 | 已完成示例到编码器的提交。HR=%1 |
Finished submission of sample to encoder. HR=%1 |
| 0xB0000002 | 已在 MFT 上为具有事件 %2 的输入流 #%1 调用了流程事件方法 |
Process event method called on MFT for Input Stream #%1 with event %2 |
| 0xB0000003 | 已完成 MFT 对事件的处理。HR=%1 |
Processing of Event by the MFT has finished. HR=%1 |
| 0xB0000004 | MFT 已通过带有参数 %2 的 ProcessMessage 接收消息 %1 |
Message %1 recieved by MFT through ProcessMessage with parameter %2 |
| 0xB0000005 | 已完成处理提供给 MPEG-2 视频编码器 MFT 的消息。HR=%1 |
Finished processing message given to MPEG-2 Video Encoder MFT. HR=%1 |
| 0xB0000006 | 在编码过程中比特率已从 %1 bps 更改为 %2 bps。 |
Bitrate has been changed from %1 bps to %2 bps during the encoding process. |
| 0xB0000007 | 在 MPEG-2 视频编码器 MFT 上开始生成输出示例。输出缓冲区计数: %2 输出缓冲区阵列开始: %3 输出缓冲区状态标志指针: %4 传入的输出缓冲区标志: %1 |
Start of producing an output sample on the MPEG-2 Video Encoder MFT. Output Buffer Count: %2 Start of Output Buffer Array: %3 Pointer to Output Buffer Status Flag: %4 Output Buffer Flags passed in: %1 |
| 0xB0000008 | 为在 MPEG-2 视频编码器 MFT 上输出已完成创建示例。HR=%1 |
Finished creating sample for output on the MPEG-2 Video Encoder MFT. HR=%1 |
| 0xB0000009 | Mpeg-2 视频编码器 MFT 正在发出输出示例(位置: %1，长度: %2)已准备好的信号 |
Mpeg-2 Video Encoder MFT is Signaling that an output sample (Location: %1, Length: %2) is ready |
| 0xB000000A | MPEG-2 视频编码器正在请求更多输入示例 |
MPEG-2 Video Encoder is requesting for more input samples |
| 0xB000000B | MPEG-2 视频编码器 MFT 已从应用程序收到输入，正在将其传入编码器。示例: %1 示例字节长度: %2 停止编码: %3 |
The MPEG-2 Video Encoder MFT has received the input from the application and is passing it into the encoder. Sample: %1 Sample Byte Length: %2 Stop Encoding: %3 |
| 0xB000000C | 正在使用以下设置创建编码器: 编码模式: %1 比特率: %2 bps 复杂度: %3 编码器实例: %4 |
Encoder is being created with these settings: Coding Mode: %1 Bitrate: %2 bps Complexity: %3 Encoder Instance: %4 |
| 0xB1000000 | 正在启动。视频: %1 (%2,%3)。音频通道: %4，视频比特率: %5，音频比特率 %6，定位偏移 %7ms |
Starting. Video: %1 (%2,%3). Audio Channels: %4, Video Bit Rate: %5, Audio Bit Rate %6, Seek Offset %7ms |
| 0xB1000001 | 正在停止。多路转换字节数: %1，收到的视频帧数: %2，编码的视频帧数: %3，收到的音频字节数: %4，编码的音频帧数: %5 |
Stopping. Bytes Muxed: %1, Video Frames Received: %2, Video Frames Encoded: %3, Audio Bytes Received: %4, Audio Frames Encoded: %5 |
| 0xB1000002 | 错误: %1 |
Error: %1 |
| 0xB1000003 | 已收到视频帧。时间戳=%1，ID=%2 |
Video Frame Received. Timestamp=%1, ID=%2 |
| 0xB1000004 | 已编码视频帧。输入帧 ID=%1，输入时间戳=%2，输出时间戳=%3 |
Video Frame Encoded. Input Frame ID=%1, Input Timestamp=%2, Output Timestamp=%3 |
| 0xB1000005 | 已收到音频示例。时间戳=%1，缓冲区中的字节数=%2 |
Audio Sample Received. Timestamp=%1, Bytes in buffer=%2 |
| 0xB1000006 | 已编码音频帧 |
Audio Frame Encoded |
| 0xD0000001 | 恒定比特率 |
Constant Bit Rate |
| 0xD0000002 | 可变比特率 - 峰值比特率限制 |
Variable Bit Rate - Peak Constrained |
| 0xD0000003 | 可变比特率 - 基于质量 |
Variable Bit Rate - Quality Based |
| 0xD0000004 | 刷新命令 |
Flush Command |
| 0xD0000005 | 清空命令 |
Drain Command |
| 0xD0000006 | 设置 D3D 管理器命令 |
Set D3D Manager Command |
| 0xD0000007 | 开始流传输命令 |
Begin Streaming Command |
| 0xD0000008 | 结束流传输命令 |
End Streaming Command |
| 0xD0000009 | 结束流通知 |
End of Stream Notification |
| 0xD000000A | 开始流通知 |
Start of Stream Notification |
| 0xD000000B | 插入标记命令 |
Insert Marker Command |
| 0xD1000001 | (双通道模式 |
(two channels mode |
| 0xD1000002 | 1/0 单声道模式 |
1/0 mono mode |
| 0xD1000003 | 2/0 立体声模式 |
2/0 stereo mode |
| 0xD1000004 | 基本格式 |
Elementary Format |
| 0xD1000005 | 视频 CD 格式 |
Video CD Format |
| 0xD1000006 | SVCD 格式 |
SVCD Format |
| 0xD1000007 | 传输流格式 |
Transport Stream Format |
| 0xF0000001 | 输入数据缓冲区占位符 - 不使用 |
Input Data Buffer Placeholder - Do not use |
| 0xF0000002 | 无标志 |
No Flags |
| 0xF0000003 | 未提供缓冲区时放弃输出 |
Discard output when no buffer provided |