| 0x50000001 | 关键 |
Critical |
| 0x50000002 | 错误 |
Error |
| 0x50000003 | 警告 |
Warning |
| 0x50000004 | 信息 |
Information |
| 0x90000001 | Microsoft-Windows-Hyper-V-SynthFC |
Microsoft-Windows-Hyper-V-SynthFC |
| 0xB0007D00 | [VMID %2] %1 |
[VMID %2] %1 |
| 0xB0007D64 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作由于出现未知错误而失败。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an unknown error. (Virtual machine ID %2) |
| 0xB0007D65 | 虚拟端口(%3)上的 NPIV 虚拟端口操作由于出现未知错误而失败。 |
NPIV virtual port operation on virtual port (%3) failed with an unknown error. |
| 0xB0007D66 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败，错误: 主机不支持此操作。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The operation is not supported by the host. (Virtual machine ID %2) |
| 0xB0007D67 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败，错误: 主机不支持此操作。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The operation is not supported by the host. |
| 0xB0007D68 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 光纤不支持此操作。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The operation is not supported by the fabric. (Virtual machine ID %2) |
| 0xB0007D69 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 光纤不支持此操作。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The operation is not supported by the fabric. |
| 0xB0007D6A | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 资源不足。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: Out of resources. (Virtual machine ID %2) |
| 0xB0007D6B | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 资源不足。 |
NPIV virtual port operation on virtual port (%3) failed with an error: Out of resources. |
| 0xB0007D6C | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 超过物理 HBA 上的最大虚拟端口数。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: Exceeded the maximum number of virtual ports on the physical HBA. (Virtual machine ID %2) |
| 0xB0007D6D | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 超过物理 HBA 上的最大虚拟端口数。 |
NPIV virtual port operation on virtual port (%3) failed with an error: Exceeded the maximum number of virtual ports on the physical HBA. |
| 0xB0007D6E | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 全球通用端口名称在光纤上已存在。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The world wide port name already exists on the fabric. (Virtual machine ID %2) |
| 0xB0007D6F | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 全球通用端口名称在光纤上已存在。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The world wide port name already exists on the fabric. |
| 0xB0007D70 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 光纤通道链路已关闭。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The fibre channel link is down. (Virtual machine ID %2) |
| 0xB0007D71 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 光纤通道链路已关闭。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The fibre channel link is down. |
| 0xB0007D72 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 无法使用 DH-CHAP 身份验证机制(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP authentication mechanism is not usable (Virtual machine ID %2) |
| 0xB0007D73 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 无法使用 DH-CHAP 身份验证机制。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP authentication mechanism is not usable. |
| 0xB0007D74 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 无法使用 DH-CHAP 哈希函数(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP hash function is not usable (Virtual machine ID %2) |
| 0xB0007D75 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 无法使用 DH-CHAP 哈希函数。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP hash function is not usable. |
| 0xB0007D76 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 已启动 DH-CHAP 身份验证事务(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP authentication transaction has already started (Virtual machine ID %2) |
| 0xB0007D77 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 已启动 DH-CHAP 身份验证事务。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP authentication transaction has already started. |
| 0xB0007D78 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 虚拟端口的 DH-CHAP 身份验证失败(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP authentication for the virtual port failed(Virtual machine ID %2) |
| 0xB0007D79 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 虚拟端口的 DH-CHAP 身份验证失败。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The DH-CHAP authentication for the virtual port failed. |
| 0xB0007D7A | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 不支持 NPIV 协议版本(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The NPIV protocol version is not supported(Virtual machine ID %2) |
| 0xB0007D7B | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 不支持 NPIV 协议版本。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The NPIV protocol version is not supported. |
| 0xB0007D7C | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 虚拟端口操作的预定超时期限(60 秒)已到期。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The pre-determined timeout period for the virtual port operation (60 seconds) expired. (Virtual machine ID %2) |
| 0xB0007D7D | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 虚拟端口操作的预定超时期限(60 秒)已到期。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The pre-determined timeout period for the virtual port operation (60 seconds) expired. |
| 0xB0007D7E | “%1”: 物理端口(%4)上虚拟端口(%3)的 NPIV 虚拟端口操作失败，错误为: (%5) 以及 NPIV 错误为: (%6)。(虚拟机 ID %2) |
'%1': NPIV virtual port operation for virtual port (%3) on physical port (%4) failed with an error: (%5) and NPIV error: (%6). (Virtual machine ID %2) |
| 0xB0007D96 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 光纤通道微型端口驱动程序不支持 NPIV，或者未正确安装 NPIV WMI 类。(虚拟机 ID %2) |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The fibre channel miniport driver does not support NPIV or the NPIV WMI classes are not installed correctly. (Virtual machine ID %2) |
| 0xB0007D97 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 光纤通道微型端口驱动程序不支持 NPIV，或未正确安装 NPIV WMI 类。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The fibre channel miniport driver does not support NPIV or the NPIV WMI classes are not installed correctly. |
| 0xB0007D98 | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: NPIV WMI 操作失败并出现未知错误(虚拟机 ID %2)。 |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The NPIV WMI operation failed with an unknown error (Virtual machine ID %2). |
| 0xB0007D99 | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: NPIV WMI 操作失败并出现未知错误。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The NPIV WMI operation failed with an unknown error. |
| 0xB0007D9A | “%1”: 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 找不到实例化虚拟端口时所在的光纤通道物理端口，或 HBA 微型端口驱动程序不支持 NPIV(虚拟机 ID %2)。 |
'%1': NPIV virtual port operation on virtual port (%3) failed with an error: The fibre channel physical port on which the virtual port is being instantiated cannot be found or the HBA miniport driver does not support NPIV(Virtual machine ID %2). |
| 0xB0007D9B | 虚拟端口(%3)上的 NPIV 虚拟端口操作失败并出现错误: 找不到实例化虚拟端口时所在的光纤通道物理端口，或 HBA 微型端口驱动程序不支持 NPIV。 |
NPIV virtual port operation on virtual port (%3) failed with an error: The fibre channel physical port on which the virtual port is being instantiated cannot be found or the HBA miniport driver does not support NPIV. |
| 0xB0007D9C | 检测到多个具有相同 PortWWN(%1)和 NodeWWN(%2)集的物理 HBA 端口。请纠正这种情况，因为这可能导致不一致的行为。 |
Detected more than one physical HBA port with same set of PortWWN(%1) and NodeWWN(%2). Please fix this condition as this may lead to inconsistent behavior. |
| 0xB0007D9D | “%1”: 没有足够的权限在虚拟端口(%3)上执行此 NPIV 虚拟端口操作并出现错误: 访问被拒绝，无法执行此 NPIV 操作(虚拟机 ID %2)。 |
'%1': Insufficient permission for this NPIV virtual port operation on virtual port (%3) failed with an error: Access Denied from performing this NPIV operation (Virtual machine ID %2). |
| 0xB0007D9E | 拒绝访问虚拟机 ID %2 上的光纤通道端口 %3。 |
Access Denied for FibreChannel port %3 on Virtual Machine ID %2. |
| 0xB0007D9F | “%1”: 虚拟端口(%3)操作失败并出现错误: 虚拟端口数超过最大限制 4 个(虚拟机 ID %2)。 |
'%1': Operation for virtual port (%3) failed with an error: Number of virtual ports has exceeded the maximum limit 4 (Virtual machine ID %2). |
| 0xB0007DA0 | 超过虚拟机 ID %2 上的最大虚拟端口限制(4)。 |
Exceeded maximum limit (4) for virtual ports on Virtual Machine ID %2. |
| 0xB0007DA1 | “%1”: 虚拟端口(%3)操作失败并出现错误: 没有满足要求的物理端口(虚拟机 ID %2)。 |
'%1': Operation for virtual port (%3) failed with an error: No physical port available to satisfy the request (Virtual machine ID %2). |
| 0xB0007DA2 | 虚拟端口(%3)操作失败并出现错误: 没有满足要求的物理端口(虚拟机 ID %2)。 |
Operation for virtual port (%3) failed with an error: No physical port available to satisfy the request (Virtual machine ID %2). |
| 0xB0007DA3 | “%1”: 虚拟端口(%3)操作失败并出现错误: 为此虚拟端口配置的光纤通道 SAN 的资源池不存在(虚拟机 ID %2)。 |
'%1': Operation for virtual port (%3) failed with an error: Resource Pool for the Fibre Channel SAN Configured for this virtual port does not exist (Virtual machine ID %2). |
| 0xB0007DA4 | 虚拟端口(%3)操作失败并出现错误: 为此虚拟端口配置的光纤通道 SAN 不存在(虚拟机 ID %2)。 |
Operation for virtual port (%3) failed with an error: Fibre Channel SAN Configured for this virtual port does not exist (Virtual machine ID %2). |
| 0xB0007DA5 | “%1”: 虚拟端口(%3)创建失败并出现 NPIV 错误(虚拟机 ID %2)。 |
'%1': Virtual port (%3) creation failed with a NPIV error(Virtual machine ID %2). |
| 0xB0007DA6 | 虚拟端口(%3)创建失败并出现 NPIV 错误。 |
Virtual port (%3) creation failed with a NPIV error. |
| 0xB0007DAA | 具有实例名称(“%1”)的 HBA 端口不支持 NPIV，不会将其用于虚拟光纤通道。 |
HBA port with instance name ('%1') is not NPIV capable and will not be used for virtual fibre channel. |
| 0xB0007DAB | 具有实例名称(“%1”)的 HBA 端口不支持 Hyper-V，不会将其用于虚拟光纤通道。要用于 Hyper-V，需要满足以下条件: 1. 存储适配器可以在单个传输中管理的不连续物理页的最大数目应至少为 128。2. 存储适配器可以在单个操作中传输的最大字节数应至少为 0.5 MB。3. HBA 传输操作的缓冲区对齐应为字节对齐或字对齐。 |
HBA port with instance name ('%1') is not Hyper-V capable and will not be used for virtual fibre channel. For use with Hyper-V, the following conditions need to be met: 1.The maximum number of discontinuous physical pages the storage adapter can manage in a single transfer should be at least 128. 2.The maximum number of bytes the storage adapter can transfer in a single operation should be at least 0.5 MB. 3.The alignment for buffers for HBA transfer operations should be either byte aligned or word aligned. |
| 0xB0007DAC | 找不到具有 ID“%1”的虚拟光纤通道资源池 |
Could not find a virtual fibre channel resource pool with ID '%1' |
| 0xB0007DAD | 在验证具有 ID“%1”的虚拟光纤通道资源池时出错: %2 (%3) |
Error while validating virtual fibre channel resource pool with ID '%1' with error: %2 (%3) |
| 0xB0007DC8 | “%1”: 已成功启动合成光纤通道 HBA %4 (%3)。(虚拟机 ID %2) |
'%1': Synthetic Fibre Channel HBA %4 (%3) started successfully. (Virtual machine ID %2) |
| 0xB0007DCA | 合成光纤通道 PNP 侦听程序无法初始化并出现错误 %1 (%2)。 |
Synthetic Fibre channel PNP listener failed to initialize with error %1 (%2). |
| 0xB0007DCB | 合成光纤通道 PNP 侦听程序线程初始化失败并出现错误 %1 (%2)。 |
Synthetic Fibre channel PNP listener thread initialization failure %1 (%2). |
| 0xB0007DCC | 无法将具有实例路径“%1”的 LUN 添加到虚拟机“%2”中并出现错误: %4 (%5)。(虚拟机 ID %3) |
Failed to add LUN with Instance Path '%1' to virtual machine '%2' with error: %4 (%5). (Virtual machine ID %3) |
| 0xB0007DCE | 还原虚拟机“%2”时出错: 在保存 VM 后，合成光纤通道 HBA %4 (%5)缺少 %1 个 LUN。(虚拟机 ID %3) |
Error while restoring virtual machine '%2': There are %1 LUNs missing for Synthetic Fibre channel HBA %4 (%5) since the VM was saved. (Virtual machine ID %3) |
| 0xB0007DCF | 还原虚拟机“%2”时出错: 合成光纤通道 HBA %4 (%5)缺少 %1 个 LUN。(虚拟机 ID %3) |
Error while restoring virtual machine '%2': There are %1 LUNs missing for Synthetic Fibre Channel HBA %4 (%5). (Virtual machine ID %3) |
| 0xB0007DD0 | “%1”: 无法查询页面 83 标识数据以了解合成光纤通道 HBA %4 (%5)的 LUN“%3”。(虚拟机 ID %2) |
'%1': Failed to query Page-83 Identity Data for LUN '%3' for Synthetic Fibre Channel HBA %4 (%5). (Virtual machine ID %2) |
| 0xB0007DD2 | “%1”: 已为合成光纤通道 HBA %4 (%5)添加新的 LUN“%3”。(虚拟机 ID %2) |
'%1': A new LUN '%3' has been added for the Synthetic Fibre Channel HBA %4 (%5). (Virtual machine ID %2) |
| 0xB0007DD3 | “%1”: 已从合成光纤通道 HBA %4 (%5)中删除 LUN“%3”。(虚拟机 ID %2) |
'%1': LUN '%3' has been removed from the Synthetic Fibre Channel HBA %4 (%5). (Virtual machine ID %2) |
| 0xB0007DD4 | “%1”: 已为合成光纤通道 HBA %4 (%5)成功恢复 LUN“%3”。(虚拟机 ID %2) |
'%1': LUN '%3' has been restored successfully for the Synthetic Fibre Channel HBA %4 (%5). (Virtual machine ID %2) |
| 0xB0007DD5 | “%2”: 未显示合成光纤通道 HBA %4 (%5)的 LUN。已在超时期限(%1 秒)后启动了 VM。请检查虚拟端口的 LUN 映射。(虚拟机 ID %3) |
'%2': No LUNs have appeared for Synthetic Fibre Channel HBA %4 (%5). The VM has been started after the timeout period (%1 seconds). Please review the LUN mappings for the virtual port. (Virtual machine ID %3) |
| 0xB0007DD6 | 无法为虚拟机“%2”保留具有实例路径“%1”的 LUN 并出现错误: %4 (%5)。(虚拟机 ID %3) |
Failed to reserve LUN with Instance Path '%1' to virtual machine '%2' with error: %4 (%5). (Virtual machine ID %3) |
| 0xB0007DD7 | 无法为虚拟机“%2”保留实例路径“%1”并出现错误: %4 (%5)。(虚拟机 ID %3) |
Failed to reserve with Instance Path '%1' to virtual machine '%2' with error: %4 (%5). (Virtual machine ID %3) |
| 0xB0007DD8 | 无法在虚拟机“%2”中注册具有实例路径“%1”的 LUN 并出现错误: %4 (%5)。(虚拟机 ID %3) |
Failed to register LUN with Instance Path '%1' to virtual machine '%2' with error: %4 (%5). (Virtual machine ID %3) |
| 0xB0007DD9 | 无法在虚拟机“%2”中注册实例路径“%1”并出现错误: %4 (%5)。(虚拟机 ID %3) |
Failed to register with Instance Path '%1' to virtual machine '%2' with error: %4 (%5). (Virtual machine ID %3) |
| 0xB0007DDA | “%1”: 计算机的实时迁移失败，因为在虚拟 HBA %3 (%4)目标上看不到源计算机上的所有 LUN。应该为: %5 个 LUN，找到: %6 个 LUN。请检查虚拟 HBA 的全球通用名称对的 LUN 映射。(虚拟机 ID %2) |
'%1': Live migration of the machine failed because all the LUNS on the source machine were not seen on the target for virtual HBA %3 (%4). Expected: %5 LUNs, Found: %6 LUNs. Please review the LUN mappings for the World Wide name pair of the virtual HBA. (Virtual machine ID %2) |
| 0xB0007DDB | “%1”: 不支持在客户端 SKU 上启动配置了一个或多个合成光纤通道 HBA 的 VM (虚拟机 ID %2) |
'%1':Starting a VM configured with one or more synthetic fibre channel HBA's is not supported on a client SKU (Virtual machine ID %2) |
| 0xB0007DDC | 不支持在客户端 SKU 上启动配置了一个或多个合成光纤通道 HBA 的 VM |
Starting a VM configured with one or more synthetic fibre channel HBA's is not supported on a client SKU |
| 0xB0007DDD | “%1”: VM 实时迁移时缺少虚拟 HBA %3 (%4) 的 LUN，原因是 VM 设置为允许减少 FC 冗余。期望: %5 个 LUN，发现: %6 个 LUN。请检查虚拟 HBA 的全球通用名称对的 LUN 映射。(虚拟机 ID %2) |
'%1': The VM has been live migrated with missing LUNs for virtual HBA %3 (%4) due to the VM setting to allow reduced FC redundancy. Expected: %5 LUNs, Found: %6 LUNs. Please review the LUN mappings for the World Wide name pair of the virtual HBA. (Virtual machine ID %2) |